6 best mounts for gun rifles

Product description

AntreeMAG 4-Pack Gun Magnet is a revolutionary gun mount allowing you to quick draw, easy retrieval of handguns, rifles and magazines.

It is less than 0.5" thick and can hold just about any pistol on the market in just about any location. Coated in a soft rubber-like substance,

it will not scratch your weapon, and will hold firmly without slipping.

Each Magnet comes with screws for easy installation.



Strong Hold, Improved Design

Low Profile for Easy Hiding and Discreet Placement

Abrasion Resistant Soft Rubber Coating Prevents Any Damage To Weapons

Improved Design lessens possibility of gun spinning

It has a large surface area for better grip with easy removal

Designed to be easily mounted anywhere. Police Tested, great for both men and women & Tactical Use





Pistol Magnet Uses



Use The AntreeMAG Magnet to keep your handgun in a variety of locations:

in your vehicle (for those with concealed carry permits)

on a wall

behind furniture or under furniture

under a shelf

under a desk

on a door or above a door

install almost anywhere only limited by your imagination



Size: 3.74"L x 1.4"W x 0.33"H

Allows for a sleek low profile gun mount

It has a large surface area for better grip with easy removal.



Ease of Installation:



1/2 inch screws & 1-1/4 inch screws for your choice

Screw in straight and don't over tighten



We suggest the use of multiple units for long/heavier guns , rifles or shotguns



Notice:

Firearms can be dangerous and should be kept out of reach of children.

It is suggested to mount an unloaded gun or lock the safety.

• Fit for all Brands & Firearm Types,Available for Handguns, Rifles, Shotguns, Pistols, Revolvers and More;
• Widely Used:Not only used for gun,but also mount other tools,like spanner,scissors and so on.
• Protective Rubber Cover :The Magnet has a rubber coated cover. Protecting from scratching, falling, moving or spinning your gun.
• Small size strong suction:Compact 3.8"L x 1.43"W x 0.4"H design for easy hiding and 55 Lbs rated.
• One year warranty, welcome to contact us for FREE EXCHANGE Or FULL REFUND with any quality problems, life-time friendly customer service.

User questions & answers

Question:	Why are none of the gun magnets on amazon 2-sided? I don't want to drill into my safe and I don't want to count on some crappy adhesive to hold a gun
Answer:	Pairs?? Yes, exactly what you see is what you receive in the box- 4 lights, remote, and stand. Great for the price
Question:	Will it hold a gun through a kydex holster
Answer:	Good morning,No it does not.Thank you
Question:	Mine didnt come with screws, why are there screws in the pic
Answer:	Yes it does.
Question:	Besides the screws, do these magnets come with the peel off sticky strips
Answer:	No

Product description

The product must be honest!

DeYoung make very serious selection on every single piece of material applied on the products and finally get the gun magnet mount that will meet and exceed all your expectations!

We offer LIFETIME WARRANTY for all our products!!



Customers' concern from market survey and study...

※ Are you looking for a low profile way to keep the gun for emergency?

※ Are you sick of the cheap hard plastic cover scratching gun surface?

※ Are you tired of gun keeping falling off during driving due to weak magnetic power but slippy surface?

※ Are you bothered by the poor quality hardware of the gun magnet in installation?



DeYoung solve all those troubles for you~



Smaller and better!

◎ Sturdy and ergonomic design, thinner than iPhone X, makes a super low profile gun mount.

◎ Premium soft silicone cover to protect your gun surface from being scratched.

◎ Specifically designed magnet layout inside to hold up to 46lbs and precisely curved surface to secure your gun in car even if you are driving over potholes or bumpy roads.

◎ Only 2 pcs heavy duty screws in need for easy installation.



CAUTION TIP:

1.Please keep the safety lock on for loaded gun and away from children.

2. A few guns, Walther P22 for example, are not ferrous for the most part and cannot be locked by magnet..

ATTENTION: BE CAREFUL TO USE ADHESIVE TAPE!

There is no single adhesive tape which can meet all kinds of surface.

Please contact professional persons to select the right adhesive tape.

3M adhesive tape only works well when used on clean and smooth flat surface.

• LOW PROFILE SIZE & STRONG POWER: up to 46lbs rated weight by premium rare earth Neodymium magnet in a compact size 3.58"L x 1.3"W x 0.27"H to firmly hold your gun without falling off or wobbling. Optimized internal magnet layout maximizes the strength just right to remove for emergency.
• ANTI-SCRATCH RUBBER COATED: high quality soft silicone surface to make sure your gun never get scratched.
• EASY INSTALLATION: with only 2pcs heavy duty screws instead of 4pcs, the gun mount can be mounted in your car, wall, desk, bedside, nightstand and anywhere flat that you want to keep the gun. 4-pack here will meet various need for gun storage in office, truck, home and gun store display
• LIFETIME WARRANTY & 24h x 7 Customer Care: if your magnetic mount gets any quality issue due to manufacturer, just email us a photo and we will ship you a brand new one FREE.
• USE FLEXIBILITY: work well for handguns, pistols, magazines, rifles and shotguns. And it’s also an ideal holder for knives, wrenches and other tools in kitchen and garage.

User questions & answers

Question:	Are these made in the USA
Answer:	I'm guessing a size 6 or a size 7
Question:	Can these hold an AR-15 upside down
Answer:	Given the stretch, probably a range of sizes. I wear a 36" or large men's brief or bikini. I'm a 7 in this panty, still with lots of support. Brands vary even if their sizing charts look the same. A 7 in this panty is also a 7 in Maidenform but it's a 6 in Jockey. Go figure.
Question:	Will these obstruct the pistol with a red dot optic mounted to them
Answer:	It is a single. Not a pack. BUT...well worth the price. This is a brand that I've been wearing for years. (Nordstrom retails them.) The fabric is soft, the cut is perfect and non-binding. elastic is a high quality that wears for years.
Question:	What is the Size of the mounting holes, looking to use black coated rivets to mount
Answer:	They will work. They are XS and very stretchy.

• ✔UNLIKE THE “TYPICAL” GUN HANGER OF UNKNOWN origin and quality that potentially puts your guns like Remington, Sig Sauer, Glock and Springfield Armory in “life threatening” danger, the HOLD UP DISPLAYS GUN HANGERS are CERTIFIED 100% MADE IN USA and backed by a LIFETIME STRUCTURAL WARRANTY, all that to provide maximum structural integrity and safety, so no matter if you are shooting your guns or not, they are always in the “right hands
• ✔GUNS ARE MEANT TO HAVE PROPER STORAGE – While safer when transported inside a case along with your lubricating oil, safety ear muffs, ammo, magazine and other tactical gear, guns are also practically “meant” to be displayed for your enjoyment even when you are not shooting, the HOLD UP DISPLAYS GUN HANGERS will turn your gun into a piece of “Wall Art” while keeping it safe and sound
• ✔YOKE PIVOTS TO ACCOMMODATE VARIOUS BUTTSTOCKS – Great for guns which have a headstock with single or uneven heels; Personalized protective padding gently and securely supports the firearm, unlike non padded wooden hangers that can leave scratches on your firearm; Deep cradle design prevents the gun from being improperly placed in the hanger
• ✔OVER 10 YEARS SERVING GUN OWNERS ALL OVER AMERICA – No matter what kind of firearm that you have, you can count on us to keep it safely stored, we have been crafting the best gun hangers and display systems that you can buy for over 10 years; Our products are manufactured in Wisconsin, where we started, and are guaranteed for life
• ✔LIFETIME STRUCTURAL WARRANTY - The HOLD UP DISPLAYS GUN HANGERS are CERTIFIED 100% MADE IN USA with REAL AMERICAN STEEL and backed by a LIFETIME STRUCTURAL WARRANTY –and Add yours to cart Now and keep your gun safely stored while supplies last!

User questions & answers

Question:	Can this mount go through a rock wall? (Want to put it above fire place
Answer:	No
Question:	What is the weight limit
Answer:	Sizes listed are 5, 6, 7. I ordered the 7, thinking it was large. It is not. Wish I'd known that before I washed them & put them on. Look elsewhere if I was you.
Question:	What's the difference between slatwall and flat wall no pics
Answer:	I don't wear tight pants or short tops so I can't answer the question... Sorry:(
Question:	How soon before you have more
Answer:	Karen D a size 6 and a size 6 medium are the same size

Product description

The with U.S. Design AntreeMAG Magnet is a revolutionary gun mount allowing you to quick draw, easy retrieval of handguns, rifles and magazines.

It is less than 0.5" thick and can hold just about any pistol on the market in just about any location. Coated in a soft rubber-like substance,

it will not scratch your weapon, and will hold firmly without slipping.

Each Magnet comes with screws for easy installation.



Strong Hold, Improved Design

Low Profile for Easy Hiding and Discreet Placement

Abrasion Resistant Soft Rubber Coating Prevents Any Damage To Weapons

Improved Design lessens possibility of gun spinning

It has a large surface area for better grip with easy removal

Designed to be easily mounted anywhere. Police Tested, great for both men and women & Tactical Use





Pistol Magnet Uses



Use The AntreeMAG Magnet to keep your handgun in a variety of locations:

in your vehicle (for those with concealed carry permits)

on a wall

behind furniture or under furniture

under a shelf

under a desk

on a door or above a door

install almost anywhere only limited by your imagination



Size: 3.74"L x 1.4"W x 0.33"H

Allows for a sleek low profile gun mount

It has a large surface area for better grip with easy removal.



Ease of Installation:



1/2 inch screws & 1-1/4 inch screws for your choice

Screw in straight and don't over tighten



We suggest the use of multiple units for long/heavier guns , rifles or shotguns



Notice:

Firearms can be dangerous and should be kept out of reach of children.

It is suggested to mount an unloaded gun or lock the safety.

• Small size strong suction:Compact 3.8"L x 1.43"W x 0.4"H design for easy hiding and 55 Lbs rated.
• Fit for all Brands & Firearm Types,Available for Handguns, Rifles, Shotguns, Pistols, Revolvers and More;
• Protective Rubber Cover :The Magnet has a rubber coated cover. Protecting from scratching, falling, moving or spinning your gun.
• Widely Used:Not only used for gun,but also mount other tools,like spanner,scissors and so on.
• One year warranty, welcome to contact us for FREE EXCHANGE Or FULL REFUND with any quality problems, life-time friendly customer service.

User questions & answers

Question:	Will these hold strong enough to charge the weapon
Answer:	Mine came with 16 screws.
Question:	Will these effect a flashlight or lazer attachment
Answer:	The magnets have heavy duty double stick tape included.
Question:	Are these polarized
Answer:	No. Made in Vietnam.
Question:	Made in which country
Answer:	Mine say they're 100% cotton, I have no reason to believe otherwise. I will say though, the sizes run small. I purchased the same size I buy at my local super store and these were smaller. Not a lot, but enough to notice a difference.

Product description

SDM Upgrade Shield Shape Quick Draw and Loaded Gun Magnets Specifications:

Size: 4.2*2.6*1 inch

Color: Black

Package includes:

1 magnetic gun clip

4*0.75 inch mounting screws

4*1.2 inch mounting screws

4*colloidal particles

NOTE:

1.If the gun is attached to this magnet ,keep the magnet out of reach of all children.

2.Magnets may demagnetized if the working environment temperature over 80°C.

• 👍【PREMIUM QUALITY】: Highest quality powerful 50 lbs rated rubber coated magnets will firmly hold your firearms without scratching them. Install almost any gun type and model in a variety of ways for quick access or storage.
• 👍【Great for Concealment】: Our 3.8”L x 1.4”W x 0.33”H, allows for a sleek concealed gun mount. Includes 4 black self-tapping screws, 1 piece of best 3M adhesive tape
• 👍【GET PEACE OF MIND】: knowing that your gun is within ready and very CONVENIENT to just reach for it in an EMERGENCY! Hanging your pistol or revolver in an accessible location like under a desk! Tough enough for almost any firearm and an overall great price for a device that will aid in maintaining a weapon within reach when one may or may not be needed!
• 👍【USE IN HOME OR VEHICLE]: Easily install our magnet in your Car, Truck, Wall, Vault, Bedside, Doorway, Desk, Table, Safe
• 👍【100% Warranty】: full refund and replacement for the first year. If you have any issues, please feel free to contact us via buyer-seller messages.

• BETTER TOGETHER: These compact and durable Hiram gun magnets ship as a set of 4 to let you mount them wherever you need them, from unused space in your gun safe to under your car or truck dashboard to beside your bed or office desk. Quick and easy access wherever you have a firm flat surface!
• POWERFUL HOLD: Each of these gun mounts features a strong magnet able to securely hold 43 lb. Use them alone for your handguns or other small arms or line them together to secure the barrels of your rifle or shotgun.
• WITHOUT A SCRATCH: Coated with premium rubber that is soft but heavy-duty, these magnetic gun mounts protect your weapon from scratches and increase friction for a studier hold. Our rubber coating also maintains the magnet against high and low temperatures and eliminates its interference with your personal electronics.
• SIMPLE INSTALLATION: Our gun magnets come with adhesive tape, mounting screws, and expansion bolts so you have the power to choose the best method for your needs. Use adhesive tape inside safes or where you need to avoid damage to the mounting surface; use the screws for a more powerful mount on walls or furniture; or use both with the expansion bolts for extra peace of mind. Sturdy and reliable performance, whichever you choose.
• SATISFACTION GUARANTEED: Our magnetic gun holders have been rigorously tested to provide the highest-quality and most effective firearm mounts on the market; we back these gun accessories with our usual strong warranty and friendly 24/7 customer service, ensuring that you’ll enjoy their use for years to come.

Product features

Specifications

• Mount Dimensions: 4.1 x 1.6 x 0.5 in. (10.4x4.1x1.3 cm)
• Mount Weight: 0.36 lb. (164 g)
• Weight Capacity: 43 lb. (19.5 kg)
• Shipping Weight: 1.76 lb. (798 g)

Multifunction Use

• All brands firearms
• Magnetic knife holder and tool holder
• Magnetic wall mount for echo dot 3rd gen

DUAL INSTALLATION

Secure your Hiram magnetic mounts using the included screws, adhesive tape, or both! Use the screws with the provided expansion bolts for extra sturdiness.

PREMIUM RUBBER COATING

Our magnetic mounts come with high-quality rubber coating to protect the finish on your firearm while increasing their hold strength. They're also temperature resistant and don't interfer with your electronics.

COMPATIBLE WITH MANY MODEL

Compatible with: Smith & Wesson (M&P Shield, M&P M2.0, 686, 10, Model 60, SD, Bodyguard 380), Ruger (LCP, LCP II, LCP 380ACP, SP101, SR1911, GP-100,LCR, BlackHawk, Red Label, LC9, RS22), Springfield(XD-S, EMP4, XDM), Sig Sauer (P226, 229, P938, P225, P320), Glock(G17, G19, G22, G42, G43), Colt (1911, Python, SAA), Kel Tec (PMR-30, KSG, P-11), Heckler & Koch USP, Browning (Hi-Power, A5, Citori 725, B-SS, BT-99, Maxus, Black Label), Walther (PPK6, P99), Taurus (85, PT92, PT-111), Remington (760, 7600, 1100, 11-87, 870) and many more...