14 best ar bipods

• With return springs and leg release button, the leg length can be adjusted from 6 inches (152mm)to 9 inches(225mm).
• Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight.
• Adjustable leg length: 5 settings for different length, the bipod is ready to meet your needs.
• Quickly attach to or detach from the rifle using existing swivel stud.
• Foldable arms with spring tension control. Come with the mount adapter.

User questions & answers

Question:	How do i attatch the rail mount to the bipod itselfl
Answer:	Yes... Remove the plastic tube from the bipod, untwist the thumb screw, thus will loosen the fingers. Place onto the piece that mounts to your to your rail system, finger tighten then attach the bracket to your rail at desired location and tighten with supplied allen wrench. The plastic protection tube can throw you off...
Question:	Would tho bipod fit on a springfield saint ar 15 5.56 rail
Answer:	This bipod comes with a weaver/pictatinny mount adapter so if your fire arm has either of those rail types, it will fit. It requires about 4 slots on a picatinny rail (just an estimate).
Question:	Can a sling be mounted to the attached bipod? I don't want to give up my sling to mount a bipod
Answer:	Yes, there is the ring on the bipod for you to attach sling.
Question:	Does it have the swivel or pivot feature
Answer:	It doesn't have a swivel or pivot feature, however I just got mine and mounted it and just checking it out at home I found that you actually can pivot up and down a reasonable amount, and I was actually able to pivot it a good amount as well. Didn't measure, but probably around 20-30 degrees worth, which would translate to many moa's and a good amount of distance at range. I had a bipod with swivel and pivot features and it never really locked in like I would have liked, so I actually like the way this one feels more. First impressions are really high. So far I can't tell the difference between this one and a much more expensive 'famous maker' one I had. Will be taking it out in the next day or two and can't wait.

Product description

UTG Recon Flex M-LOK(R) Bipod, 5 Foldable Positions with Slide Locking Ring, Extendable legs with Height Locking Thumb Wheel & Textured Nonslip Rubberized Foot Pads, Matte Black Anodize, Lightweight Aircraft Grade Aluminum Construction, Cent Ht: 5.7"-8.0", Leg length: 7.4"- 10.1"

• Directly attaches to m-lok handguards at the 3 and 9 o'clock positions
• Ergonomic spring loaded slide locking ring for quick and effortless bipod deployment
• Lightweight aircraft grade aluminum construction finished in a matte black anodize
• Included components: Bipod

User questions & answers

Question:	I have a pof p-415 with a factory m-loc handguard. the bi-pod lugs are too large for the slots. what am i missing? where is the mis-match
Answer:	The screws should have an oblong lug that turns and locks into the m-lock hole as you tighten the screw. You must first loosen the screws about halfway to allow them to turn and lock inside the slot. Hope that helps and good luck.
Question:	Does this come with both legs or just one
Answer:	Yes it is a set. I found this to be an excellent bi-pod, well made and sturdy. Two things to consider with it is that you lower and raise the legs separately so it is a little slower to deploy than a bottom rail type bi-pod. It is also does not set high enough to allow a 40 round magazine. As a positive it stores out or the way when retracted parallel to the barrel.
Question:	How do you adjust for cant if you are on uneven terrain
Answer:	The only was to adjust for cant with this bipod is to lengthen or shorten one of the legs. It does not swivel like a Harris, but is very easy to use and adjust. I am very happy with my Recon. HTH, Dan
Question:	Are these the ones stallone used in final blood? where he sets the ambush
Answer:	I’m not 100% positive. However, I can confidently say Stallone would approve.

Product features

TL-BPDM01

UTG’s new Recon Flex Bipod is the first that are comprised of two separate legs which allows direct attachment onto a Keymod or M-LOK handguard at the 3 and 9 O'clock positions and provides a clear lower rail. These bipods quickly deploy the means for a rock solid shooting platform while reducing the bulk and overall weight in comparison to traditional-style bipods that usually hang off the bottom of the handguard.

Features:

The bipod is made with lightweight Aircraft Grade Aluminum Construction finished in a Matte Black Anodize. The Recon Flex Bipod is equipped with Versatile Bidirectional Bipod Legs with 5 Posi-lock Positions for firearms with varying height clearance and mounting real estate while containing fully adjustable legs with 5 precut extendable lengths and flexible In-between positions lockable via the Thumb Wheel.

Rubberized Feet:

Rubberized feet grip numerous types of surfaces, which stabilize shooting position and keeps your shot steady and on target. Fully adjustable and lockable legs with quick retraction features make the clamp-on bipod a go-to choice for shooters and outdoor sports enthusiasts.

• Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight.
• With the spring on both legs, you could fold the legs up easily and keeping silent when hunting.
• With integrated design,the tactical bipod is built with the quick release picatinny adapter, which enables you to install and disassemble it from the rifle conveniently and quickly.
• 5 settings of leg length. It can be adjusted from 6 inches (152mm)to 9 inches(225mm). Slightly pressing the button, you could adjust the length to meet different needs when hunting.
• High quality rubber on the bottom of the leg makes the bipods shockproof and antiskid.

User questions & answers

Question:	Now does this tripod have the quick release right on the tripod so you do not have to drill any holes in to the stock on a aa556r ark angelstock
Answer:	The "BIPOD" DOES HAVE A QUICK RELEASE THAT ATTACHES TO A PICCATINY RAI. SO YOU WILL HAVE TO BUY AND ATTACH THE RAIL TO THE STOCK WITH TWO BOLTS OR SCREWS
Question:	Would this work on a savage Stevens model
Answer:	If you have a picatinny rail it will work. If not there is a version of this with a swivel stud adapter
Question:	What is the smallest m-lok section you can use
Answer:	About 2 inches
Question:	Can the quick release adapter be removed
Answer:	No sir , found that out last night. They do have another option that is for one that mounts with out the picatinney adapter.

• Made of hardened steel and aluminum, non-rust black anodized finish, the rifle bipod is duty and light weight
• Loosing the bottom screw to swivel the top adapter,you can adjust to any angle you want.When tighten the bottom screw,the adapter will be secured,which provides you a steady support.
• With the spring on both legs, you could fold the legs up easily and keeping silent when hunting.
• 5 settings of leg length. It can be adjusted from 6 inches (152mm)to 9 inches(225mm). Slightly pressing the button, you could adjust the length to meet different needs when hunting.
• High quality rubber on the bottom of the leg makes the bipods shockproof and antiskid.

User questions & answers

Question:	How to mount to A-10 rilfe
Answer:	IT would really depend if your rifle had any picatinny rail or M-lock surface. Perhaps you could find something like an adapter to add to your barrel shroud at a gun shop. You would certainly need somewhere with at least a small strip of Picatinny or M-lock. I own this bipod and it is quality, I rather enjoy it so far.
Question:	Will this work on my ruger airhawk 2 pellet gun
Answer:	Yes if it has a picatinny rail
Question:	Would someone have instalation instructions
Answer:	It depends on what mounting system you have these Bipods are for a Picatinny style system but you can get a Picatinny adapter for about any hand guard system. Once you have a Picatinny mount simply lock the mount on top over the rail with the tension screw in one of the slots. I recommend the legs be set-up to point forward toward the muzzle end of the Rifle when folded up.
Question:	Will this fit a sig m
Answer:	It will fit it as long as you have picatinny rails on your rifle.

• Adjustable leg length (5 settings) with return Springs, you could adjust the length to meet different needs when hunting.
• The bipod comes with a 20 mm quick release adapter, which enables you to install and disassemble it conveniently and quickly.
• Made of hardened steel and aluminum, non-rust black anodized finish, the bipod is duty and light weight.
• High quality rubber on the bottom of the leg makes the bipods shockproof and antiskid.
• Foldable arms with robust external spring tension control.

User questions & answers

Question:	Will this fit my saint edge
Answer:	The bipod attaches to a standard picatinny rail. To attach to a sling mount you would need a sling mount to picatinny rail adapter.
Question:	Will it fit a choate sniper stock
Answer:	yes (at least from the photo); if you go to: http://www.accu-shot.com/Atlas_Bipods.php You can compare the difference between Atlas bipods and essentially there are 7 versions but only 2 at standard height using the picatinny quick release rail mount (ADM 170-S Lever). Those are the BT10 and BT46. This one is marked as the BT10 but the BT46 costs approx. $40 more and provides the following additional features: Fore and Aft pivot limiting bosses (limits the foreward / backward canting) Non-rotating legs (better construction) Inner leg construction from T7075 (stronger construction) weight 0.91 more The BT10 is a nice, solid bipod and unless you are willing to spend the extra $40, and feel you are doing intense use i.e. combat ops, then BT46 isn't necessary (in my opinion :) but I own both.
Question:	Will this fit a Savage .243 bolt action
Answer:	Hi Mike, I've fired .50 cal. rifles going through Special Operations Target Interdiction Course (SOTIC) Category I military sniper course for Special Operations. The Atlas is a solid device and I own two of them. With that said, the .338 Lapua shouldn't be a problem but the .50 cal is a different animal. When I fired the .50, my entire body slid backwards and it felt like a flash bang grenade went off at the muzzle. Also, the amount of dust and dirt made it impossible for a spotter to track the round to target. I think it would hold up to a .50 but the real question is for how long? The force over time could cause the metal points of contact to become loose. Again, i don't know, but the Atlas is a solid device and works better than any other bipod that have ever used including the Harris.
Question:	Is an existing rail required to mount this
Answer:	BT10 clamps to a picatinny rail, BT10-NC has a threaded bolt to thread into different stocks,clamps,etc..., the BT10-LW17 is the BT10-NC with a quick release attachment for a picatinny rail. Refer to BT's website for details/research (they make the Atlas) - IMHO the best bipod I have ever used! Regards

Product description

Significance of Best Rifle Bipods



If you are a shooter or a hunter, you might have known very well about Bipods. Without Bipods, your hunting will not be complete as Bipods are a very essential tool in hunting. Bipods are used to hold the hunting weapons like rifles, machine guns, etc. It can also be used in long-range weapons to allow the hunters to stay at rest position while hunting or shooting.

Other than this, it also helps to increase the forward focus and reduce the movements which will make you an accurate shooter. It has to be placed on the ground and get it attached to the weapons. If you feel tired, it holds the entire weight of the rifles and allows you to take rest. So, you can focus on your target with strength and energy.

Bipods help you to focus on your goal. Furthermore, it contains fixed and adjustable lengths to make you comfortable while shooting. You can move the weapon left, right and forward or behind using the bipod.



What makes UUQ Bipod the best one?



- The bipod is made of carbon fiber and milled 7075 aerospace aluminum. It is lightweight and you can carry it wherever you go. At the same time, it is also sturdier than any other ones made of aluminum alloy.

- The legs of the bipod have 11 notches, providing adjustable center heights from 6 inches to 10 inches. You can get any desired position based on your target.

- It has one screw clamp to lock the position of the bipod on any 1913 style Picatinny rail, and it keeps your rifle without any movement until you detach that.

- The Panning and canting capabilities of Bipods allow you to fold (7 positions) and tilt (12︒) in any direction you want without a change in your original position.

- The bipod’s rubber feet can help you to hold the weight of your rifle even on the improper surfaces.

• [PREMIUM MATERIALS]: Constructed of rugged, high-strength materials that include milled 7075 aerospace aluminum, stainless steel, carbon fiber and d polymer that is extremely strong. It's lighter but rock solid. Much enhance shooting stability.
• [EASY ADJUSTMENTs]: The bipod can be folded forward and backward to 7 positions. 11 locking detents for different leg lengths, the central height of the bipod can be adjusted from 6 inches to 10 inches, providing varied bipod positioning to fit different height terrain.
• [BUILT IN CANT]: The built in cant can rotate about 10°. By adjusting the middle lever, you can aim moving target rapidly and precisely.
• [RAIL COMPATIBILITY]: The bipod mounts directly to any 1913 style Picatinny rail via a one screw clamp assembly.
• [RUBBER FEET]: The bipod’s rubber feet can help you to hold the weight of your rifle even on the improper surfaces.

• With integrated design,the tactical bipod is optimized for rapid one-handed adjustments.
• Come with extra barrel mount,you can install bipod on barrel of universal diameter.
• Quickly and easily loaded with spring forward tension without fear of failure or warping.
• High quality rubber feet makes the bipods shockproof and antiskid.
• 5 settings of leg length. It can be adjusted from 6 inches (152mm)to 9 inches(225mm). Slightly pressing the button, you could adjust the length to meet different needs when hunting.

User questions & answers

Question:	Whats the biggest barrel the mount can grab onto
Answer:	I’m not sure, I mounted it to the picatinny rail.
Question:	On AR15 bottom rail, only 2 inches of space. Will the picatinny mount be fully secured with just 2 inches of rail
Answer:	Yes it will mine it attached at the end of mine
Question:	I just bought a savage 110 predator xp. could this be used on it if i mount a picatinny rail to the stock
Answer:	Yes, or you could put the adapter on your barrel and mount it to that and not have to put a rail onto your stock. Or, you could order one that attaches to your front swivel and use that one. It will work just fine and be cheaper. You can attach your sling to the bi pod so you won't lose the function of the swivel. I have done both but prefer the latter.
Question:	Will it fit my
Answer:	It should fit, but I don’t know for certain. They sent me the wrong and didn’t send me a replacement, just a refund.

Product features

Solid Barrel Mount

This adapter is suitable for long barrel gun.

Made of harden steel, this adapter is built to last.

With four long screws, this adapter applies to any diameters of barrel.

Barrel mount quick attach picatinny bipod

This bipod can be directly attached to picatinny rail. Also, it can be installed to long barrel.

Product description

Specification:

Color: Black

Material: Carbon Fiber

Leg Height:6 inches/ 152mm (retracted) ; 9 inches / 225 mm (fully extended)

Light weight : 10ozs



Feature:

Leg length can be adjusted from 6 to 9 inches.

The legs can be folded forward or backward.



Package Included:

1 x 6-9 inches Bipod

1 x Mount Adapter

1x Allen Wrench

User questions & answers

Question:	Will this fit 30.6 bolt action rifle Mossberg Patriot
Answer:	It is everything you need to replace the fork oil seals and dust seals if you are just changing your fork oil and seals. It is not for a complete rebuild of the forks.
Question:	Will this fit on a savage axis 2 xp
Answer:	From the All Balls site fits: Suzuki GSX-R1000 2009-2015. Thanks, jenn
Question:	Did anybody get instructions with this mfer
Answer:	I tend to trust the All Balls reference more than Amazon's, and All Balls does call for this for the 2016 ZX10R.
Question:	American made
Answer:	It's not on the compatible list.

• Finished with high-tech, durable aluminum construction, lightweight, strong, and built to last.
• The bipod will come with rail mount adapter.It will be more convenience to used.
• Extendable Spring Powered Legs with Comfortable Rubber Feet Stands.Can be adjusted for best shooting position.
• Extendable Legs with Spring Tension & Lockable Collar for Most Secure and Flexible Adjustments.
• Patented Quick Detachable Lever Lock Controlled Mounting Base for Rapid Deployment and Detachment.

User questions & answers

Question:	What size Barrel will the adapter fit on
Answer:	it will fit on any barrel as long as it fits between the bolts. it should come with longer bolts for a tube fed rifle, but it sometimes squeezes it too hard and blocks shells from coming through
Question:	Will the adapter fit a 30mm barrel
Answer:	This fits on the rails. I use this for my cross bow.
Question:	Will this fit on my 7mm rem mag
Answer:	If you have a picatinny rail underneath or a sling stud in front it will work and can be made snug. As to completely flush to stock not so sure . To adjust this I sometimes use quality padded two side tape to squish in and secure completely creating a self forming gasket. It does come with a rubber gasket that will probably work just fine.
Question:	Will it fit my M1a soocum
Answer:	Fit yes. Hold up to the recoil? Not a chance.

Product features

Feyachi 3 in 1 Tactical Riflebipod

Features

• Aluminum Material
• Rubberized Stand
• Fits for 20mm weaver/Picatinny rails
• Come with rail mount adapter and barrel mount.
• Adjustable Height can be extend from 6.5 to 7.0 inches.
• Foldable Arms can be folded up for easy carry and storage.
• Posi-Lock legs provide extremely solid, exceptionally accurate shooting support
• Tactical low profile for versatile applications. Rubberized comfort stand.

Bipod Adapter

Barrel Mount

Rubberized comfort stand

Product description

UTG New Gen QD Level Lock Medium Profile Shooter's Bipod, Foldable with Tip-Proof Posy-Lock, Extendable Legs with Spring Tension and Lockable Collar for Fine Adjustments, Center Height 6.2"-6.7", Complete with Integral Picatinny Mount and Swivel Stud Adaptor Mount, Rubber Stand.

• Patented Quick Detachable Lever Lock Controlled Mounting Base for Rapid Deployment and Detachment
• Heavy-duty Full Metal Construction to Meet Harshest Requirements, Innovative Anti-rotation Steel Crossbar Insert for Rock Solid Mounting
• Extendable Legs with Spring Tension & Lockable Collar for Most Secure and Flexible Adjustments
• Reliable, Finger Friendly Posi-Lock Control for Bipod Leg Folding and Un-folding
• Complete with Swivel Stud Kit for use in Swivel Stud Mount Applications

User questions & answers

Question:	Does this bipod allow you to swivel the rifle back and forth when targeting a object? I have an AR style picatini mount
Answer:	Daxwell products are mostly sold by the truckload.
Question:	How much does this bi-pod weigh
Answer:	As with all Daxwell cutlery kits, each set of these kits is individually wrapped.
Question:	I have a dpms ar 15. my rifle doesn't have a quad rail but it does have a a small rail with a hole on the bottom. by any chance would this fit? thanks
Answer:	Yes, they are prepackaged. A little flimsy, but they work well.
Question:	does it fold back or forward
Answer:	Do not know.these were for a 05 yz125. But I think they maybe the same

Product features

UTG New Gen Med Pro Shooters Bipod, Quick Detach

Feature

• New Generation Superior Construction with 20% Larger Mounting Deck to Fit on any Picatinny/Weaver Rail
• Innovative Anti-rotation Steel Crossbar Insert for Rock Solid Mounting
• Heavy-duty Full Metal Construction to Meet Harshest Requirements
• Extendable Legs with Spring Tension & Lockable Collar for Most Secure and Flexible Adjustments
• Reliable, Finger Friendly Posi-Lock Control for Bipod Leg Folding and Un-folding
• Complete with Swivel Stud Kit for use in Swivel Stud Mount Applications
• Unique Non-slip Rubberized Foot Pads for any Terrain or Surface
• Center Height Adjustable from 6.2" to 6.7"
• Leg Length Extendable from 6.7" to 7.5"

About Us

We set un-compromised high standards for all of our business operations. Our goal is to provide a total solution for any line of products we offer. We pay close attention to industry trends with a focus on making the products available for hunting, shooting and outdoor enthusiasts like you.

In 2009, we made an important decision to start our Made-In-the-USA Manufacturing Operation. We will continue to follow our vision for U.S. made products, to be innovation-driven.

Product description

Feature:

1.The hunting bipod with collapsible design,which is easy and convenient to carry and store.

2. lightweight and sturdy,durable aluminum construction, spring-loaded pawl adjust design

3. Special pivot and rubber feet, keep steady on the uneven ground.

4. Throw lever style quick release mount fit for any standard 20mm Picatinny rail,Quick detachable and easily adjustable Pivoting Mount.

5. The legs of bipod are spring-loaded and flexible and can retract or stretch with the touch of a button.5 different heights,and the height range is from 6.5in to 9.5in or so.

6. CNC processing of legs and body,legs can be forward or backward independently. Bipod has 5 modes to adjust angle, Perfect for use in uneven terrains.

• 【ROTATABLE】Throw lever style quick release mount fit for any standard 20mm Picatinny rail,Quick detachable and easily adjustable Pivoting Mount.
• 【FLEXIBLE】CNC processing of legs and body,legs can be forward or backward independently. Bipod has 5 modes to adjust angle, Perfect for use in uneven terrains
• 【DURABLE】lightweight and sturdy,durable aluminum construction, spring-loaded pawl adjust design
• 【STABLE】Special pivot and rubber feet, keep steady on the uneven ground
• Locks securely in 4 different positions: stowed back, 90 degrees straight down, 45 degrees forward and stowed forward

Product description

Feature

1.Heavy duty and made of hardered steel

2.Compact and light weight

3.Non rusting black anodized finish

4.Quick attack or detack by using the existing swivel stud.

5.This bipod does not have a swivel top and does not tilt from side to side.

6.Adjustable height & foldable arms with spring tension

Specifications:

Leg Height:6"/152mm (retracted);9"/225 mm(fully extended)

Light weight:10ozs

Package Includes:

--1 x 6-9 inch Swivel Stud bipod

--1 x rail mount adapter

• Adjustable leg length (with 5 settings) with spring return, with rubber padded on top and a non-rust black anodized finish.
• Comes with a rail mount adapter, no need to buy another one.
• Light weight and Compact. Quickly attach or detach by using a swivel stud.
• This bipod does not have swivel top and does not tilt from side to side.
• We guarantee you 100% refund if you are not satisfied with our products.

User questions & answers

Question:	what makes it 2 in
Answer:	no
Question:	Fit break barrels
Answer:	Hello, this product is not coated. After the initial seasoning, the pot body changed from silvery white to black. In order to get better results, it is recommended to use vegetable oil or animal oil to simply season the product according to the maintenance manual.
Question:	will the picatinny mlok adapter hook straight up to my magpul or will i need to buy picatinny rail mounts first
Answer:	Hello, no, because the bottom of this wok is round
Question:	Will this fit on a
Answer:	Thickness about 1.5mm

Product description

Specification:

Color: Black

Material: Hardened steel and aluminum

Leg Height:6 inches/ 152mm (retracted) ; 9 inches / 225 mm (fully extended)

Light weight : 10ozs



Feature:

Non rusting black anodized finish.

Leg length can be adjusted from 6 to 9 inches.

The legs can be folded forward with spring tention. 

Heavy duty and made of hardened steel and aluminum.

Compact and light weight.



Package Included:

1 x 6-9 inches Bipod

1 x adapter

• Coming with adapter and the Allen screw, the bipod can be quickly attached or detached by using the swivel stud.
• Made of hardened steel and aluminum, non-rust black anodized finish, the bipod is duty and light weight.
• Adjustable extension leg slide and lock securely with a button.5 notches for different length to meet your needs.
• High quality rubber on the bottom of the leg makes the bipods shockproof and antiskid.
• Mount accessories can be puchased separately on Amazon.Just search:B07VSZFPMP.

User questions & answers

Question:	What is that little keyring thing for down by the screw that tightens the bipod to the m-lok adapter
Answer:	It will mount on a pic rail or on a swivel
Question:	What is the difference between this product(asin: b07sl8vjrd) and asin : b081mwbgd4. looks exactly the same, same specifications. difference is price
Answer:	You should already have everything you need . It just attaches to your sling stud ! Your rifle if all stock already has what it needs
Question:	Will this fit on a springfield saint ar
Answer:	This bi-pod mounts to a sling stud. The adaptor supplied mounts to a picatinny rail and a sling stud is in the adaptor. So your bow needs a sling stud or picatinny rail.
Question:	Will this bid swivel to allow for horizontal panning while fixed to the ground
Answer:	It shouldn't be a problem, I mounted mine on a savage b22 model 22wmr rifle. Works just fine.

Product description

The Caldwell Pic Rail XLA Fixed Bipods provides a stable shooting platform that conveniently attaches to almost any pic rail forearm. The light weight aluminum design makes it easy to collapse and leave on your gun for easy transport. Quick deployment with spring loaded legs, adjustable leg height and soft rubber feet make this bipod stable and able to achieve the perfect positioning.

• DIMENSIONS: 6”-9” height and weighs 8 oz
• ACCURACY: Notches are located on the legs for quick and easy indexing, it can be tightened down with the leg locking knobs and features a quick release cam lever lock for added stability
• EASE OF USE: Legs fold up for easy transport and the bipod mounts quickly on the picatinny rail mount of the forend (1.5" long pic rail)
• CONVENIENT: Lightweight, quick-deployment aluminum legs and slim profile for movement heavy or prone shooting
• SECURE: Soft rubber feet for enhanced stability and a non-marring padded base for forend protection

User questions & answers

Question:	Does this bipod allow for any cant
Answer:	Mine is 13" in diameter at the widest part of the outside. My wok that I bought is a 14-incher so this lid sits just barely inside the top of the wok and it's kind of a loose fit, which is fine. It worked good for smothering a grease-fire really quickly, and I throw it on top of the pan if I need to walk away from the stove for few minutes. Safety is always important.
Question:	Does this bipod require a bipod mount that I need to purchase separately? Thx
Answer:	My lid is larger than my pan and this does not form a tight seal. No, the lid does not have vent holes, but vents well.
Question:	Can you use the caldwell bipod pivot lock with this one
Answer:	I use it for my open grill. The handle is wood so it isn’t oven safe.
Question:	Does it pivot
Answer:	This cover is aluminum made in USA, heavy gauge, not flimsy, commercial grade. Lid is not flat, only the top part to accommodate a wooden handle. Available in many sizes for all size woks. Thank you. The Wok Shop

Product features

Range Bags

With a variety of range bags and rests, Caldwell heightens accuracy and builds a sense of confidence.

Shooting Targets

From classic paper to high caliber steel, Caldwell offers a variety of targets to ensure your trigger time is a success.

Hearing Protection

Caldwell E-Max earmuffs deliver high quality electronic hearing protection designed for all day use.