10 best inertia bullet puller

Product description

RCBS specializes in offering a complete line of reloading supplies for the home hand loader. RCBS Reloader Supplies set the standard for high-quality reloading equipment - just as they've done for over 60 years. With six decades of experience under their belt, RCBS knows all the ins and outs of the gear used by the home ammunition reloader. The brass case is the most expensive part of a loaded round of ammo. Reloading brass (by replacing the primer, powder and bullet inside the used brass casing) offers savings of about 60% over factory-loaded ammunition. RCBS handloading supplies provide shooters with everything needed to re-use expensive brass cartridge cases by reloading them with new primer, powder and bullets.

• Fits 1 1/2 inch - 12 threaded presses
• Collet bullet puller for larger cases
• Made of steel
• RCBS is the leading manufacturer of ammunition reloading equipment for rifles and pistols
• Resolves mistakes quickly and easily
• Ergonomic handle

User questions & answers

Question:	Does this have collets that need to be assembled like the Franklin
Answer:	There are different colors in different types and sizes. If you have additional questions or are looking for a specific color, please email [email protected]. Kindest Regards, Alexandra
Question:	Is it big enough to hold the larger diameter bullets such as the WSM's or 300 win mag
Answer:	Different sizes of the toy come in a different color. If you purchased the green toy and you subscribe, you will continue to receive green. Please let me know if you have any additional questions. Kindest Regards, Alexandra [email protected]
Question:	Where is this item made
Answer:	It runs until it is turned off or runs out of battery.
Question:	hi, it is suitable for AK 7,62x39 or 7,62x
Answer:	Its a song from the band, "Toy Box" called Tarzan and Jane. Its saying "come baby come. Ill take you for a swing." "Let's go honey. I'm tingling"

Product features

Over 75 Years of Reloading history

RCBS is a leading U.S. manufacturer of precision reloading equipment. Ever since 1943, when Fred T Huntington founded the company in the back of his father’s Oroville, California, laundry and dry-cleaning plant, the company and its employees have gone to extreme lengths to provide customers the highest-quality reloading tools and accessories.

Everything you need to Reload

RCBS offers precision engineered reloading products. Our most iconic being the Rock Chucker Press.

We pride ourselves in building the highest quality products that last for decades of reloading.

We offer a full line of single stage and progressive presses, as well as dies, powder dispensers, and everything you need to create your perfect reloading bench.

Quality Built in the USA

RCBS is proud that its products are made in the USA by Americans.

Our most popular items include our Chargemaster Combo and Chargemaster Lite powder dispensers and our Rock Chucker Press and Rock Chucker Kits.

If you're new to reloading, consider one of the many RCBS Kits to get you started. From there you can add Case Prep products and upgrade individual products to speed up the process or hone the accuracy of your special load.

Product description

Safely strips loaded rounds in seconds without damage to bullet or case. Features engineered head design that allows use on full range of calibers from tiny 5.7 X 28FN to the largest Magnums. "Full-size" ergonomic molded handle with rubber insert for comfort and sure grip. Traps components with just a few raps on the bench.

• No Fabric, unable to choose No
• Imported
• Safely strips loaded rounds in seconds
• Prevents damage to bullet or case
• Head design that allows Use on calibers from Tiny 5.7 x 28FN to the largest magnums
• Ergonomic molded handle for comfort and sure grip
• Traps components with just a few hits

User questions & answers

Question:	Will this work for a 7.62x54r for the Mosin Nagant
Answer:	Due to the intensity of each dog we are not able to guarantee it if the dog destroys it.
Question:	Where is this item made
Answer:	I would go with the 4" size Romp N Roll. The ball is softer and sized nicely for your 6 month old without being too small. http://www.amazon.com/Jolly-Romp-n-Roll-Blueberry-4-5-Inch-Light/dp/B0032GEHFS/ref=sr_1_1?ie=UTF8&qid=1455743620&sr=8-1&keywords=jolly+ball+romp+n+roll+4+inches
Question:	will this work for a .300 wsm
Answer:	I'm not sure about the color. For me, I picked a red ball and it is still going, although my dogs have annihilated the rope, the ball is still going strong.
Question:	Will it work on a 30-378 Weatherby magnum
Answer:	This Pet Craft Toy was designed in the USA and is manufactured in China, but rest assured, we go through a variety of testing to ensure the safety of the toy for your pets. If you have additional questions about our toy please email [email protected]. Kindest Regards, Alexandra

Product description

When it comes to safety it is always important to use the right tool for the right job. This is extra true when dealing with firearms and ammunition. This Boomstick Gun Accessories bullet puller is just that kind of tool. The kit includes 3 collets that allow you the opportunity to remove a wide range of caliber bullets from their cartridges safely and easily. From .17 Remington all the way to 50-70 govt, this one tool has you covered. To use simply follow the instructions and load the collet, load the cartridge, and then tap the "hammer" with a Series of short, sharp impacts against a solid wooden surface and the bullet will come out of the cartridge. That's it! overall dimensions 12.00" x 4.87" x 1.35". handle size is 1.01" x 0.83" and is 3.94" in total length. Color: Blue

• Safely and efficiently removes bullets from their cartridges
• Impact style puller
• Work with any size caliber .17 Remington to 50-70 Govt
• Simple and easy to Use
• Overall dimensions 12.00" x 4.87" x 1.35". handle size is 1.01" x 0.83" and is 3.94" in total length

User questions & answers

Question:	Will this work on a 10mm pistol round
Answer:	The Swing & Fling Durafoam ball is made in China.
Question:	Anyone elses delivered in a brown envelope? Mine came with othef items but thought it was weird that everything was wrapped up with tape
Answer:	Large is about 4" and medium is about 3".
Question:	where is this made in/manufactured
Answer:	China
Question:	Purchased this may 9, 2018. used very little. today it shattered in use. may have been a defect in manufacture. is there any warranty
Answer:	This is a great ball. We bought one for the Mastiff and it's holding up well. We had to make a bigger knot, but all is good.

Product features

Body & Handle

When it comes to safety it is always important to use the right tool for the right job. This is extra true when dealing with firearms and ammunition. Overall dimensions 12.00" x 4.87" x 1.35". handle size is 1.01" x 0.83" and is 3.94" in total length. Color: Blue

Three Sized Collets

The kit includes 3 collets that allow you the opportunity to remove a wide range of caliber bullets from their cartridges safely and easily. From .17 Remington all the way to 50-70 govt, this one tool has you covered.

Pull Apart

To use simply follow the instructions and load the collet, load the cartridge, and then tap the 'hammer' with a Series of short, sharp impacts against a solid wooden surface and the bullet will come out of the cartridge.

Product description

WORKS FOR MULTIPLE CALIBERS. Designed for SINGLE-STAGE PRESSES. Long gone are the days when you need a new collet for each and every caliber of bullet you want to pull. This Mil Spec GRIP-N-PULL pulls ALL of the following caliber bullets: 5.56, 7.62, 338 and 50 BMG. --- FAST, CLEAN & EASY. The GRIP-N-PULL is by far the fastest bullet puller on the market. No need to spend 5 minutes changing out collets every time you switch bullet calibers. And there’s really no contest between the GRIP-N-PULL and inertia/hammer pullers. GRIP-N-PULL takes 50% the time and eliminates 100% of the mess. --- COMMERCIAL GRADE. The GRIP-N-PULL is constructed of 1/4-inch heavy-duty #304 stainless steel and comes with a lifetime warranty. --- ZERO INTRUSION ON BULLETS. Collet pullers can be really hard on bullets, rendering them completely unusable. The GRIP-N-PULL, on the other hand, doesn’t do any damage to your bullets. --- QUIET & PAINLESS. Tired of banging a hammer puller against the concrete and the accompanying headache, sore shoulder & unhappy wife? You need the GRIP-N-PULL! No banging a hammer. No racket in the garage. Operating the GRIP-N-PULL is completely silent. --- UNIQUE PATENTED DESIGN. The GRIP-N-PULL is patented technology (see US Patent 9103642 B2). This is a one-of-a-kind reloading tool you can’t get anywhere else. --- MADE IN THE USA. Designed, manufactured, packaged and shipped in Blackfoot, Idaho, GRIP-N-PULL is proud to be a 100% USA-made product. --- LIFETIME WARRANTY. The GRIP-N-PULL is guaranteed to last a lifetime. It's the last bullet puller you will ever need. --- 100% SATISFACTION GUARANTEED. We’re so confident you’ll love the GRIP-N-PULL that we guarantee it 100%. If you’re not happy with your purchase, simply return it within 30 days and we’ll issue you a full refund. --- OTHER MODELS AVAILABLE. We also offer "Standard Rifle", "Large Rifle" and "Pistol" GRIP-N-PULLs, all available here on Amazon.

• Pulls ALL of these MIL SPEC calibers: 5.56, 7.62, 338 and 50 BMG (taking the place of several collets)
• Pulls bullets in a fraction of the time with zero mess & doesn't make any intrusion on the bullets
• Made of 1/4" heavy-duty #304 stainless steel and backed by a LIFETIME warranty
• Proudly made in the USA
• Three other models available: 1) Standard Rifle, 2) Large Rifle, 3) Pistol

User questions & answers

Question:	will this work for
Answer:	I HAVE SEARCHED THE WEBSITE FOR THAT INFORMATION BUT CANNOT FIND IT. I WOULD SUGGEST CONTACTING THE MANUFACTURER. hOWEVER, I CAN TELL YOU THAT FOR AGGRESSIVE CHEWERS, THESE ARE ABSOLUTELY THE GREATEST!
Question:	Has anyone tried this with 50 BMG
Answer:	The big ball is a little bigger than my fist. The circle rope is my dogs favorite and it's pretty big, maybe ten or so inches across. Smallest thing is actually the rope that holds the tennis ball. They destroyed that instantly but the rest have been great!
Question:	Can i pull 30 carbine with the mil spec grip-n-pull bullet puller
Answer:	The company told me they are made in China.
Question:	How well does it work with cast lead bullets
Answer:	The rope is about 0.5" thick.

Product description

Hornady 050095 Cam Lock Bullet

• Great Tool for Reloaders - keep this Hornady Cam Lock Bullet Puller 050095 handy for a fast and easy way to pull bullets with your press. Mounts to any press with standard 7/8 -14-inch threads and uses Hornady Collet Only (sold separately). Not for use with cast bullets
• Why Do I Need a Hornady Bullet Puller - because mistakes happen, so be prepared. Whether you are fixing mistakes from incorrectly handloading cartridges to taking apart factory manufactured cartridges, this tool will help you salvage the bullets, brass, and powder with no damage or spillage
• Quick & Easy to Use - simply place the cartridge into the reloading press, raise the cartridge into the puller, clamp the puller down on the bullet, raise the press arm and presto, the bullet is out. Once you have your settings in properly, you can begin to pull dozens of bullets. Intended for rifle cartridges only
• Caliber Size Specific Collets - keep several appropriate collets for each caliber size range of bullets you intend to pull at your reloading bench for the appropriate fitting. There are thirteen different collets that will pull most any bullet, from 17 caliber through 458 caliber, except a flush seated wad cutter
• Four Main Components - this Hornady collet bullet puller is constructed with a cam lock die body, size specific COLLETS which are SOLD SEPARATELY, the plunger, and cam lock handle assembly lever

User questions & answers

Question:	I recently tested several reloads and found my gun likes bullets setted .012 off the lands. Has anyone ever reloaded pulled ones with success
Answer:	It is the size of a tennis ball
Question:	Will this tool work with steel case rounds
Answer:	I think he would love this...we have 2 beagles that are puppies (8 months) and love to chew and destroy everything and this one they have no destroyed and my son and daughter in law's golden retriever puppy(6 months) and yellow lab love theirs as well and have not destroyed it
Question:	Does this come with any collets, if so what ones does it come with
Answer:	Hello Amazon Customer, Thank you for your inquiry. The country of origin is China. Sincerely, JLAHome
Question:	Your description says collets sold separately. One of your customer questions asks if it comes with collets and was answered yes. So which is it
Answer:	Some type of cotton rope

Product features

Cam Lock Bullet Puller | Item #050095

The Fastest, Easiest Way To Pull Bullets With Your Press. Just Clamp On The Bullet, Pull Down On The Handle And The Bullet Is Removed. Intended For Rifle Cartridges Only — Do Not Use For Pistol Cartridges. Uses Standard Collets (Sold Separately, See Chart Below).

About Us

'Ten bullets through one hole' was the philosophy of Joyce Hornady, the company's founder.

Founded in 1949, Hornady Manufacturing has become a world-leading innovator of bullet, ammunition, reloading tool and accessory design and manufacturing. At Hornady, ammunition is more than their livelihood. It's a major part of their daily life.

Hornady acquired SnapSafe in 2015 to complement and expand their offerings in the security products market segment.

Product description

When you need to pull some bullets for whatever reason, an impact style tool is the easiest method. One stern “whack” and the bullet is separated from the brass. Three different collets are included allowing you to pull bullets from almost every caliber, rimmed or rimless. The versatility alone makes this bullet puller the only one to have.

• SPECS: 12” L x 5” W
• VERSATILITY: 3 different sized collets included allows you to pull bullets from almost any caliber from .22 Hornet to 45-70, rimmed or rimless
• EASE OF USE: Works with one stern "whack" to separate bullet from brass
• DURABLE: Constructed of lightweight aluminum and heavy-duty plastic
• INCLUDES: 1 hammer, 3 collets and 4 o-rings

User questions & answers

Question:	Does this work by grasping the case or the bullet? I managed to press a .45 acp so deep I don't think it could grasp the bullet
Answer:	Great question! We haven't tested these with cats to see if they enjoy them or not, so we can't say for sure. But they are light weight, weighing 1.75 ounces each, so a cat shouldn't have any problem with batting them around and tossing them a bit. If you'd be willing to test them out with your cat, we'd love to get your feedback. Please reach out to us at [email protected]
Question:	Would you buy this for a Dillon machine? In other words, my husband has the dillon reloader, and the dillon bullet puller is 29.95... interchangeable
Answer:	The Diameter is 2"., perfect for a smaller dog.
Question:	what calibers will work with this puller
Answer:	No, there is no axle or bearing on the inside -- the rope goes through the ball and knots in a yoke below.
Question:	Will it work on Remington 700 ultra-mag
Answer:	It’s about 7 inches from the knot above the tennis ball.

Product features

Impact Bullet Puller

The Frankford Arsenal Quick-N-EZ Impact Bullet Puller makes pulling bullets a simple process. Just drop the loaded round and sternly tap the Bullet Puller against a piece of wood to separate the bullet from the brass.

A Perfect Puller

Frankford's Impact Bullet Puller is ideal for disassembling improperly loaded ammunition or reclaiming brass and bullets from military surplus.

3 Collet System

With 3 different sized collets included, you can remove stuck cases from virtually any caliber.

Improve Your Bench

The Frankford Arsenal Impact Bullet Puller is an essential tool for every reloading bench, keeping you reloading for the long haul.

Product description

Benchmaster Kinetic Bullet Puller W/ 4 Collet Set Rubberized grip. Comes with collets: Universal, .22 centerfire thru .45 caliber, (except .25 ACP). Manufacturer: BENCH MASTER Model: 15315

User questions & answers

Question:	Will this work with a 338 lapua mag
Answer:	I dunno where tis be made. But it's a piece of rope. I don't need a NASA scientist making it.
Question:	Will this work for 458 socom
Answer:	Well, so far my dog hasn't died or grown any obvious mutations... But it does hurt if he hits you with it... so maybe you should look elsewhere.
Question:	Does this mess up the bullet
Answer:	Made of 100% natural cotton fibers, natural rubber, this toy is washable, non-toxic and absolutely safe for your pets!
Question:	What do I use to pull a 6mm bullet
Answer:	I believe the seller stated they are made in China.
Question:	what collet for 327 federal mag or 32 H&R mag
Answer:	Thank you for the question. I'm guessing you would like to have a reply from a customer rather than the seller, but I can verify that it is 100% cotton. Hopefully some other customers can confirm this as well.
Question:	Do i have to use rcbs collets? I have a bunch of hornady collets but im not happy with their puller
Answer:	I am not certain where they were made. I do know they have held up very well. I have a 75 lbs. mixed breed three years old who has been trying his darnedest unsuccessfully to destroy them. I would certainly buy them again, but it does not look as though I will need to do so for quite a while.
Question:	Will this work with the lyman bullet puller
Answer:	These balls are very small. To small for any medium to large dog. These balls are good for a 5 to 20 pound dog.
Question:	Will these work with the rcbs mfg. by quinetics corp
Answer:	The rope toys were designed in the US, but they are manufactured in China. Our customer service is made in the USA. When you buy from Otterly Pets you are supporting a local family-owned US business.
Question:	Are there 9 sizes & will they work in a rcbs impact puller
Answer:	Definitely not! They are made with 100% cotton throughout the whole rope ball toy. Thanks so much for the question.
Question:	Does it fit 28 nosler brass
Answer:	Thank you for your question and concern. While the risk is minimal, there is still a risk, and for this reason we are careful to stress the importance of engaging in supervised interactive play with your dog to help minimize this possibility.

Product features

Over 75 Years of Reloading history

RCBS is a leading U.S. manufacturer of precision reloading equipment. Ever since 1943, when Fred T Huntington founded the company in the back of his father’s Oroville, California, laundry and dry-cleaning plant, the company and its employees have gone to extreme lengths to provide customers the highest-quality reloading tools and accessories.

Everything you need to Reload

RCBS offers precision engineered reloading products. Our most iconic being the Rock Chucker Press.

We pride ourselves in building the highest quality products that last for decades of reloading.

We offer a full line of single stage and progressive presses, as well as dies, powder dispensers, and everything you need to create your perfect reloading bench.

Quality Built in the USA

RCBS is proud that its products are made in the USA by Americans.

Our most popular items include our Chargemaster Combo and Chargemaster Lite powder dispensers and our Rock Chucker Press and Rock Chucker Kits.

If you're new to reloading, consider one of the many RCBS Kits to get you started. From there you can add Case Prep products and upgrade individual products to speed up the process or hone the accuracy of your special load.

Product description

Hornady L-N-L Impact Bullet Puller. Easily remove bullets without damage. Remove bullets from rifle and pistol cartridges without causing damage while capturing the bullet and powder for reuse. Removes bullets from cartridges without causing damage. Captures the bullet and powder for reuse. Effective on most rifle or pistol cartridges up to . 45 caliber How it works: Insert the correct collet in the plastic cap so the flat side of the collet fits with the handle side of the bullet puller. Screw the cap onto the handle. Loosen the cap a few turns and insert a cartridge — bullet first. Push the cartridge in until extractor groove or rim are engaged. Tighten the cap. Tap on hard surface until bullet is removed.

• EFFECTIVE on most rifle or pistol cartridges up to . 45 caliber
• CAPTURES the bullet and powder for reuse
• INNOVATIVE HANDLE DESIGN stores two extra collets
• REMOVE BULLETS from cartridges without damaging the bullets
• Tap on hard surface until bullet is removed
• Sport type: Shooting

Product description

- Product Description : Impact Bullet Puller.

- Package Include : 1 pc impact bullet puller ,3 different Collects and 3 O-Rings.

- Net Weight : 0.13kg/pc.

- Size : 4.6"inch(12cm) x 11.5"inch(29.2cm).

- Caliber type:

Collect#1(1 Groove)

.17 Remington, .218 Bee, .22 Hornet, .222 Remington, .223 Remington, .25 Auto, .30 Carbine, .32 Auto, .32-20 Winchester, .380 Auto/9mm Luger/.38 Super/.40 S&W/10mm.

Collect #2(2 Grooves)

.22 Jet/.38 Special/.367 Magnum/.357 Maximum, .25-35 Winchester, .250 Savage, .257 Roberts, .25-06 Rem/.270 Win/.280 Rem/30-06/.243 Win/7mm-08 Rem/ .308 Win/.358 Win/.45 ACP & 240 Win, .30 Remington, .30-30 Winchester, 7.62x39, .32 Winchester, .35 Remington, 38-50 Win/.44-40 Win/.41 Mag/.44 Spl/.44 Mag, .45 Auto Rim, .45 Long Colt.

Collect #3(3 Grooves)

.264 Win/.7mm Rem Mag/ .300 Win Mag/.338 Win Mag/ .375 H&H/ .458 Win Mag/ All Weatherby Mag Calibers Except .378, .416, and .460, .33 Winchester, .348 Winchester, .444 Marlin, .45-70 Govt, 50-70 Govt.

- Shipping : We are international sellers, China post is our main carrier, generally to the major countries in America and Canada for about 7-20 days. If you have not received any goods for a long time or have any problems, please contact us.

• 1) Include 3 different Collects,3 O-Rings and Instructions For Use.
• 2) Works with almost every Caliber from 22 Hornet to 45-70.
• 3) Material: Polycarbonate Impact Style Body with a Solid Metal Shaft.

Product description

When you need to pull some bullets, for whatever reason, an impact-style tool is the easiest method. Just one stern “whack” and the bullet is separated from the brass. It is as easy as that. Three different collets are included allowing you to pull bullets from just about every caliber from 22 Hornet to 45-70, whether rimmed or rimless. Versatility like that makes this bullet puller the only one to have. Don’t wait until you need it!

• 3 different collets included
• Works with practically every caliber from 22 Hornet to 45-70
• Works with rimmed or rimless bullets
• Impact-style tool to easily pull bullets
• Works with one stern "whack" to separate bullet from brass

User questions & answers

Question:	Will it work with
Answer:	The Targhee Vent was made for warm weather use. The vent panels on the side allow for great air flow!
Question:	Collets were not delivered with bullet puller. We paid for products and did not receive the product described. How do we remedy the situation
Answer:	I think the size chart is generic. Generally KEENs seem to run pretty true on length and the mid to back portion is M, but it has a roomier toebox and not a ton of arch. I have wide flat feet and these are amazing. Bought my first pair of their shoes like 10 years ago and they are my go to. I have 5 different at the moment, these, the mid-hiker version, the slides they make, casual shoes, and work boots.
Question:	Does this work well for 30-06. .303 and 30-30 looking to make some dummy rounds
Answer:	Mine came early.
Question:	will this inertia 17 bullet pull it out
Answer:	The large is about 8" and the colossal is 10"+