10 best gun vise

• DIMENSIONS: 32.5 inch L x 11 inch W x 10.5 inch
• EASE OF USE: All 4 feet are non-slip and independently adjustable, the tool and accessory trays are removable and the entire vise mounts directly to the benchtop (hardware not included)
• VERSATILITY: Ball and socket articulating clamp pads allow for the pads to adapt to any firearm’s surface with height and length adjustable front and rear clamps
• NON-DESTRUCTIVE: Non marring, glass filled nylon vise/clamp construction
• DURABLE: Features a steel tube frame structure
• CAUTION: Designed for working on a firearm and should never be used as a shooting rest – also should not be used as a bow press

User questions & answers

Question:	Would this vise also work at the range for sighting a rifle in
Answer:	Hi David, the cleaning solution included helps removing dust and eliminating static from your Records, and will not leave any sticky residue on your Vinyl. We are so confident you are going to love your New Velvet Brush and cleaning solution that we give you a 2 Year Hassle Free Money Back Guarantee, No questions asked!
Question:	Guessing you can't use for torqueing down a muzzle device
Answer:	A record should always be cleaned in the direction of the grooves, however one method of cleaning suggests to place the vinyl on the turntable and start spinning it, and as it turns, gently go from the inside of the record towards the outer edge, this action would clean the record in the direction of the grooves as it spins and also delicately sweep from the center outwards without going against the grooves. I hope you find this information to be useful.
Question:	Is there an ar10 mag well that can be purchased or an adapter that can be installed onto the ar15 magwell holder so one can work on the ar10 inventory
Answer:	Sure, go ahead. It’s your stylus and cartridge. They’re your records. It’s your money. For me, if It were 1960 and I was using the cabinet console record player my dad had just purchased at the furniture store, I’d probably do that myself. But it’s not. If I happen to have to replace my cartridge and stylus it would cost probably $100 or more, especially if I upgrade. That’s more than my dad paid for that entire stereo. In addition, some of my new records cost $30 or more. So, for me, my gel stylus cleaner is money well spent, and I delight in its benefit.
Question:	Could you use this to build an AR-15, instead of using a benchtop vise set-up
Answer:	Not the 45F but I did have a Denon 7F which was similar. Try holding the tonearm in one hand and the gel in the other, then gently lift the gel pad to to needle a couple times. This is how I use the gel pad to clean my needle on my Fluance table. (Although on the Fluance I can remove the headshell from the tonearm which makes it easier).

Product features

The Ultra Gun Vise

The Tipton Ultra Gun Vise is a perfect fit for any serious firearm or archery owner. Its versatile design allows users to securely lock in conventional rifles, break open shotguns, modern sporting rifles, handguns, muzzle loaders, compound bows and crossbows for cleaning, gunsmithing and maintenance. The Ultra Gun Vise features articulating over molded non marring rubber clamps, two solvent-resistant clamp assemblies, two solvent-resistant accessory trays and four individual leveling feet. Additional features include a rigid stainless steel frame, modular chassis system, and non-slip ergonomic adjustment knobs. The Tipton Ultra Gun Vise is built to last and is the absolute BEST vise you can own!

Product description

Tipton best gun Vise 181-181tipton gray gun vise181-181 Tipton best gun Vise features, non-marring contact surfaces, every component adjusts to accommodate different firearms and projects, l-shape center post moves where you need it, stiff solvent resistant nylon stands up to years of hard use. 782-731 the gun vise is the ideal third hand for cleaning and Gunsmithing. It features a rubberized cradle and jaws to protect your firearm, quick release cam action for easy access, molded in compartments for solvents and small parts and solvent resistant plastic.

Part of Tipton's line of gun-cleaning supplies, this vise was designed to accommodate the widest possible array of firearms for cleaning, maintenance, or gunsmithing, and is easily configurable to handle bolt-action rifles, break-open shotguns, AR-15s, and handguns. A central aluminum channel lets the user move individual components to the ideal position for their firearm. Each individual component then adjusts to the perfect position for secure support. The rear base features two adjustable offset clamps for a tight grip on a wide range of buttstock configurations.

The vise is extremely stiff and made from high-quality, solvent-resistant material that will stand up to years of hard use.

Manufacturer's Warranty

All Battenfeld Technologies products are covered against manufacturing defects for a period of one year from purchase. Defective products may be returned within the warranty period for repair or exchange, at our discretion.

About Battenfeld Technologies

Battenfeld Technologies designs, manufactures, and sells a complete line of superb, innovative products for hunters, shooters, reloaders, and gunsmiths.

• Ease of use: L-shape center support holds break-open guns securely and separate quick-release cam blocks move independently to accommodate any stock shape
• Versatility: Easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects
• Durable: Non-marring, solvent-resistant polymer stands up to years of hard use
• Convenient: Flat and round bottom compartments hold bottles, screws and parts
• Innovative: Customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks

User questions & answers

Question:	Where is it made
Answer:	Yes for all those questions and mine flies for about 12 minutes
Question:	breakdown shotgun
Answer:	no a tablet will not fit. Holder is made for phones
Question:	Is there anyway to level the vise once the gun is secured in the vise (fine tuning if you will
Answer:	El serial esta en el equipo,en el espacio donde va la bateria
Question:	Does this product have an AR Mag Well Block
Answer:	please confirm if the pictured controller, Bluetooth controller is included.. it is not listed in text as such..

Product features

Best Gun Vise

Tipton's Best Gun Vise is extremely adaptable, allowing the user to find a custom fit while cleaning or working on any firearm. With non-marring contact surfaces, you'll know your firearm is secure without worrying about damages. Try the Tipton Best Gun Vise today!

Central Channel

Central aluminum channel lets the user move individual components to the ideal position for their firearm. Each individual component then adjusts to the perfect position for secure support.

Rear Clamps

The rear base features two adjustable offset clamps for a tight grip on a wide range of buttstock configurations. With this flexibility, the rear clamp blocks can accommodate practically any stock configuration, style and size of cheek piece, or cast-off.

Front Support

The grip support features two leg heights and can be maneuvered along the length of the T-track to support the stock.

Product description

The Hoppe's gun vise has dual lockable sides to hold your firearm securely in place without making a scratch. It also provides compartments to hold cleaning tools and small parts.

• Dual Lockable Sides for a secure, no scratch hold
• Compartment for tools- stay organized while cleaning
• Durable, constructed with chemical resistant polymer
• Accessories not included - Gun Vise Only
• Sport Type: Hunting

User questions & answers

Question:	Will this vise be able to handle building an ar 15 on it
Answer:	It's made in China. I hope that doesn't dissuade you in purchasing it. It's actually a very well constructed piece of engineering. I love mine and use it frequently. It works just as well on my AR platformed pieces as it does my long guns.
Question:	Can you tell me how wide the forearm portion will open up to? I’m curious if it’ll work for a benchrest rifle
Answer:	I've only recently used it for a couple rifle scope mounts. I have not done anything else with it, but it is quite flexible. I'm sure it would be fine for a shotgun as well.
Question:	Is it full adjustable to fit rifles and handguns
Answer:	just my opinion here but this vice could VERY easily have adjustable feet added to it which would enable you to level it. there are holes in the base of the vice that would accommodate adding any number of ways to do this. whether it be as simple as using rubber feet with threaded studs or even a round headed bolt with a nut and washer on top and bottom to make adjusting or "fine tuning" a snap.
Question:	Can you use this for cleaning AR15 rifles
Answer:	Tipton does not make one for the Best Gun Vice but Wheeler does. Part #: 156211 ($16). My Tipton vice came with the Wheeler AR Block included as a kit and it works very well with my AR.

Product description

Take a work bench anywhere with the Tipton Standing Ultra Gun Vise. The freestanding, 4-leg system removes the need to pack around a table or a bench and the collapsible, lightweight design makes it perfect for transporting to and from the field or range. This Gun Vise is the perfect height and features the Ultra Gun Vise Modules, with non-marring clamps, ball and socket articulating clamp pads and removable trays for maximum versatility.

• DIMENSIONS: 35" H x 54" W x 30" D Extended, 6.5" H x 43" W Collapsed and weighs 20 lbs
• EASE OF USE: Oversized leg levers for effortless setup and collapses down for easy transport and storage, removing the need for a table or a bench
• VERSATILITY: The Ultra Gun Vise modules feature non-marring, glass-filled nylon clamps and removable accessory/tool trays that allow for an adjustable and customized setup
• DURABLE: With a lightweight, rigid, all-steel construction this portable bench is solid ensuring it is ready for all situations
• CONVENIENT: The 35-inch height creates optimal comfort while working and it features a built-in bottle opener

User questions & answers

Question:	Is this strong enough to install/remove barrel nut on AR
Answer:	Yes, I have had everything between bullpups to average 48" long an AR15 will fit.
Question:	Will this work for sighting in laser and red dots on pistols. . . or is it too big? I dont have a workbench or vice, so this would cover both aspects
Answer:	Forend Grip adjusts from approximately 1-1/8” to 2-5/8” wide. Butt gap is adjustable from about 7/8” to 1-3/4” wide. This item is very light. I bought it to hold rifles during cleaning because it is plastic and chemicals won’t necessarily hurt it and will clean off easily with solvent. IMO it is WAY too light and flexible for use as a bench rest. Won’t grip the stock tight enough for that. Can’t do better than a Lead Sled for a bench rest. I wouldn’t recommend it for serious smithing either. With that said, I’m happy to have purchased it for my intended purpose - rifle cleaning.
Question:	Can you remove legs for benchtop use
Answer:	Designed for rifles; could clamp a pistol in the vice in a pinch.
Question:	Can this be used for a complete AR 15 build? Can you torque parts that need to be
Answer:	Yes. I have and it works great! No magazine post though.

Product features

Standing Ultra Gun Vise

Tipton's Standing Ultra Gun Vise makes cleaning your firearm easier than ever before. A completely modular interchangeable design allows virtually any shape firearm or crossbow to be secured in place and cleaned. With collapsible legs, you're able to transport this vise to the range.

Versatile Design

Ball and socket articulating clamp pads allow the Ultra Standing Gun Vise to adapt to any firearm surface. The front and rear clams are height and length adjustable.

Always Organized

Featuring an accessory tray for organizing, the Standing Ultra Vise keeps track of any small parts that would otherwise get lost.

Strong Hold

The dual clamp technology rigidly holds any firearm shape in place, while a rigid steel tube frame structure allows for complete access to your firearm or crossbow.

Product description

The Gun Butler offers a convenient all-in-one solution to all your cleaning/carrying/storage needs. Two removable non-marring forks (which snap into the base for easy storage) hold the gun securely in place, while thoughtfully-planned compartments and slots hold bore solvent, jags, brushes, mops, a cleaning rod, spray lubricant, and tools. The Gun Butler contains everything a shooter needs to clean a gun - all with a convenient carrying handle for easy transport.

• Great for storage, organization and transportation of cleaning supplies
• Non-marring cleaning forks hold gun securely
• Molded in compartments for organization
• Non-slip rubber feet
• Durable and rigid solvent resistant polymer construction

User questions & answers

Question:	How well does this work for ar15's and ak47 type rifles??? (i see most all pictures showing standard hunting rifles
Answer:	Yes it works fantastic on air guns and CO2 guns. I have an old 22 caliber Webley break frame air rifle made in World War II for training purposes and it keeps this gun running like it was made last week. The Webley has been in my family since World war II and this is the only product that has been used on it since... the original oil by my family was actually taken from a captured German soldier. These old air rifles and some new ones have leather on the end of the piston as a seal and this product keeps the leathers in perfect shape. I have actually used it to rejuvenate old air guns that would no longer work because of hard dried leathers.
Question:	Would this work well to apply a muzzle brake? Basically can the forks handle the twisting/torquing
Answer:	@Boston from March 25, 2018 your comment is incorrect, pushing false info into the public yet again. Cents (Not pennies, the USA doesn't have a coin called a penny its a common misconception, we have the Cent piece, Cent coming from PerCENT (%), and it was made of Bronze (95% Copper, 5% Tin & Zinc) from 1864-1962 besides 1943 when they made "steel war cent's" and in 1962 they removed the Tin from the cent coins, leaving the cent coin in 1962 as 95% Copper and 5% Zinc, and remained this way til 1982 when they finally changed to the current composition of 97.5% Zinc and 2.5% Copper. So technically cents still have both Zinc and Copper today, and also had both Zinc and Copper back in the day between 1962-1982. Get your facts straight before posting an Amazon (INCORRECT) answer please.... Yes, You, "Boston"
Question:	Can it be used to tap a stock
Answer:	Yes it can be. 1.5 is more for shooting out in the field and the hunt. Travels easy. Depends on how much you shoot and how many guns you are using though. 6oz is more bang for the buck and this stuff lasts forever. Hope to get your business ~Heintz
Question:	What is the distance between the two support pieces? I would like to use this for cleaning the bore of an AR15 upper with a speed on it
Answer:	I have used both Ballistol and Break-Free on firearms for over 20 years. The Ballistol is a superior product. It is non-toxic and does a better job of preventing corrosion. It is also a superior bore cleaner and when mixed 50/50 with water it can be used to clean residue from corrosive ammo and black powder firearms. Try that with a petroleum based solvent like Break-Free and you will end up with a ruined firearm.

Product description

The MTM Gun Vise was designed to accommodate a wide array of firearms for gun cleaning, maintenance, or gunsmithing, and is for rifles and shotguns. All firearm touch points are rubberized to protect your guns finish. The second fork behind the clamp is for cleaning guns, so that they will have proper angle for cleaning. The 11 compartments in the base can be used for separating gun components or anything you choose. 21 screw driver bit holders, molded to the unit, are as easily suited for jags and brushes as they are bits. Made of rugged, chemical and solvent resistant polypropylene plastic, the MTM Gun Vise is made to last!

• Quick clamp up using a single cam activated lever for a secure non-marring hold
• Ideal for all Gunsmithing needs
• Room to organize cleaning supplies with various sized compartments for patches, screw driver bits, jags, brushes, solvents and cleaning rods
• Mounted on four skid-resistant rubber feet and is free-standing or can be bolted down
• Made in USA,  out of chemical and solvent resistant polypropylene plastic

User questions & answers

Question:	Can you tighten an AR barrel nut to torque using this vise
Answer:	I have only serviced my AR's on mine, have yet to remove/install a barrel nut but believe it wouldn't be a problem. I have a buddy who's a fully qualified AR Custom Builder, whom of course owns way higher and expensive equipment in his shop but when he saw my Tipton Standing Ultra Vice he was also of the opinion installing/removing barrel nuts should be feasible with this vice. You may already know this but the legs fold up and out of the way, exposing all four L corners with reinforced pieces for bench mounting so for more rigidity in a shop environment you also have that as an option if the long legs produce to much "wiggle" or movement. It probably be a good idea to contact Tipton Direct and ask.
Question:	Why do none of these ads include dimensions? What are they
Answer:	Yes! Although only for long guns. Bolt action works super. Semi auto, works very well. I’d suggest you get the part that I believe is an option which is the part that can fit inside your magazine holder on the semi. Plus it’s great to clean any firearm. I was worried too about buying this. Very happy I did. Oh, and I did get the one with ‘legs’ - not certain if you’re considering that. Without the stand being at ‘waist’ high level - I don’t believe it will help you sight in a long firearm. I use mine at home for cleaning and to get a very close ‘center’ but if you can take it to a range, it’s a piece of cake to center. Just need to try your best to keep the rifle from moving post firing. It will take 3-5 tries to center at 200 yards. 100 yards is much simpler. At the range I centered at 50 yards first. Then texted with a 20 mag (556), then 100. I suggest you bring a white sharpie so you can make a ‘dot’ just in case your rifle slips of center, then you check to make sure you know where the scope dials had you centered. Hope I made sense and helped. Last point, it is SO MUCH easier if you have a helper at the range while centering- it’s hard to fire AND at the same time confirm the rifle doesn’t shift a bit as you go through the process. I’ve used on my semi’s: 556 and 308. And my 6.5 Creed that is bolt :-)
Question:	Is this made in China
Answer:	The legs fold up and you can use it directly on a benchtop, no problem.
Question:	What is the shortest length this will support
Answer:	I've used it for cleaning rifles to lapping and torqueing down scope rings. An AR built might be pushing it.

Product features

MTM GV-30 Gun Vise Cleaning Maintenance Center

MTM Case-Gard's alternative to a normally high-dollar shooter's item. Any type of gunsmithing or maintenance needed for your rifle or shotgun can be done with the MTM. The MTM Gun Vise features a fast, single adjustment clamp down and a secure non-marring hold. The gun forks are positioned high and low giving the option of a level clamp up for maintenance, or a sloped clamp up for drainage. Shotgun barrels are held securely for easy cleaning. Organize your cleaning supplies with the 14 separate compartments, including a small divided tray that slides to uncover more compartments in the base for smaller, easy to lose items. Eleven screw driver bit holders, molded to the unit, are as easily suited for jags and brushes as they are bits. If you pay close attention to the details, there is a place provided (low and out of the way) for holding two cleaning rods. No more trying to figure out where to rest your rod while making adjustments. Made of rugged, chemical and solvent resistant polypropylene plastic, the MTM Gun Vise is made to last!

Product description

The Sighting and Cleaning Rest mechanically and optically aligns points of impact and aim. If you can shoot a reasonable group, this is the perfect accessory. Easy to follow instructions. Doubles as a cleaning vise. Fully adjustable for any length gun, precision elevation adjustment, 4 point leveling with an adjustable forend support, welded steel construction with a powder coat finish. Plastic utility tray included.

• Works as a 3 shot sighting system
• Adjusts to any length gun
• Supports guns perfectly for cleaning and scope mounting
• Welded tubular steel construction
• Parts tray included

User questions & answers

Question:	After Calwell shooting rest, is this stable enough so the sight can be reset to the original point of aim then scope adjusted to the 3 shot group
Answer:	No, it's really meant for working on the rifle. You can't clamp the rifle down and there are no elevation adjustments.
Question:	Will it hold a pcp, (no recoil), air rifle during sight-in
Answer:	I find it works best for cleaning, but I have no problems using it for my Hi-Point 40 or Ruger SR40. It seems a little unstable for mounting a pistol or carbine for range firing. Hope this helps
Question:	What is the overall length of the vice for storage
Answer:	It's just for cleaning and working on your firearms. But it is wonderful. Nice and light and compact. I do take it to the range with me, but not for sighting in my scope. If you want a great stand, get the Caldwell Matrix.
Question:	Does this vise come with the levels as pictured on Hyskore's website
Answer:	It depends on your Shot gun length. I have a benelli semi automatic and it's small for my shotgun. Primarily, I use this for my Standard AR-15, with 16" barrel length.
Question:	Does this work for shooting off of also
Answer:	Patrick Q said it best, to tighten a barrel nut you should have the AR in a AR upper vise block sitting in a bench mounted vise. I wouldn’t let that change your mind on buying this Gun Vise though. I use mine probably 3-5 times a week, I highly recommend buying it, you won’t be disappointed!
Question:	Does it work well for pistols? I have a S&W M&P Shield 9 mm and a Dan Wesson Model 15-2 357 Mag revolver. Can I use it easily one-handed
Answer:	Under the Product Details section: Product Dimensions: 32.5 x 9 x 7.5 inches
Question:	So will this work with cleaning and sighting in scopes, or just cleaning your firearms
Answer:	I couldn't find a country of origin...Likely China, but a decent vise.
Question:	Does it work well for shotgun
Answer:	center to center on the rifle supports is 26.5 inches

Product features

Compact Range Vise

The Compact Range Vise offers a completely new level of performance, securely holding the widest array of guns possible while collapsing to fit in a range bag. The Compact Range Vise collapses to 11-1/4” and expands to 17-3/4”. Two non-marring forks protect your guns’ finish while holding them securely in place for cleaning and light maintenance. The Compact Range Vise is extremely durable and is made from highquality, solvent-resistant nylon that will deliver years of lasting performance.

Product description

Tipton, gun vise, fits Universal, gray.This product is manufactured in United States.

• Great for cleaning and gunsmithing
• Non-marring contact surfaces
• Rigid, solvent-resistant polymer stands up to years of hard use
• Convenient 1 piece design
• Internal compartments for tools, solvents and parts

User questions & answers

Question:	Can this be shipped to a friends address
Answer:	Yes, that is what it is designed to do. Just not made as a shooting rest.
Question:	Can I use this to zero in a scope from a .22 LR rifle
Answer:	I sighted in several low power rifles, i.e. 9mm, .45, .380, .22 with little problem. Rear clamps get in way of good visuals though.
Question:	Will this fit a cva elite stalker
Answer:	All 3 post pieces collaps to to about 6 to 8 inches at the rear but the rods extend out about 2.5 feet at the base. Great for storage (when collapsed, post easily adjust, great for range, bore lighting, or gun cleaning.
Question:	The pictures show 2 different vices. One has 4 red pads (front, middle, and vice(2)). The other has five red pads - the four mentioned previously, plus one on the rear post. The front posts are different - one is narrow and deep; the other wide and shallow. Which vice is the current production vice that a new buyer
Answer:	comes as pictured

Product features

Tipton Gun Vise

Secure your rifle or shotgun for just about any work you want to perform on it. The Tipton Gun Vise is an ideal “third hand” for cleaning and gunsmithing. It features a rubberized cradle and jaws to protect and grip your gun, a quick release cam action for easy access, molded-in compartments for solvents and small parts, and is made of tough, solvent-resistant polymers.

• Great for cleaning and gunsmithing
• Molded in comparments for organization
• Non-marring contact surfaces
• Rigid, solvent-resistant polymer stands up to years of hard use

Product description

The Hyskore Portable Armorer’s Vise is the perfect gun servicing fixture at your work bench or take it to the range. The bench clamp fits from 3/8” to 2-3/8”. The vise rotates 360 degrees around a central axis and has an integral clutch that allows it to lock up at any angle. Guns can be held in any position for cleaning, scope mounting or maintenance. This means you can clean with the muzzle angled down so that chemicals and debris run out the muzzle and not into the action or trigger group. If you have an AR-15, remove the rear take down pin and grip the forend in the vise and the gun will be securely held while allowing full access to both receivers.

• Solid welded steel construction
• Rotates 360 degrees around a central axis
• Clutch allows lock up at any position
• Foam padded jaws
• Clamps to table or bench

User questions & answers

Question:	How thick a table will the clamps acccept
Answer:	They will ship it to where you want.
Question:	What is the closed width of jaws
Answer:	You need to use the gun vise to hold your rifle in a steady position, While using a laser bore sight kit to zero the scope. It is an excellent vise for zeroing in a scope or performing maintenance on your weapons.
Question:	Does anyone know another vise grip similar to this one but better quality
Answer:	yes it will Thank you
Question:	Has anyone used this for torquing a barrel nut on ar
Answer:	I got the one with a wider front support and the red rear resting pad above and behind the vice. Should be the one shown in picture #2 that has all the written details of its features. I bought mine a few months ago.

Product description

Take a work bench anywhere with the Tipton Gun Maintenance Stand. The freestanding, 4-leg system removes the need to pack around a table or a bench and the collapsible, lightweight design makes it perfect for transporting to and from the field or range. The built-in wings allow you to mount a Best Gun Vise and the steel rails were made to accept the Ultra Gun Vise Modules for maximum versatility.

• DIMENSIONS: 35" H x 54" W x 30" D Extended, 6.5" H x 43" W Collapsed and weighs 20 lbs
• EASE OF USE: Oversized leg levers for effortless setup and collapses down for easy transport and storage, removing the need for a table or a bench
• VERSATILITY: Features mounts to attach a Best Gun Vise and the steel rails will accept the Ultra Gun Vise modules
• DURABLE: With a lightweight, rigid, all-steel construction this portable bench is solid ensuring it is ready for all situations
• CONVENIENT: The 35-inch height creates optimal comfort while working and it features a built-in bottle opener

User questions & answers

Question:	Do the ultra vice come with the stand
Answer:	The closed width of the foam pads on the jaws is 0.0 inches. The metal jaws that the pads are mounted on have approx. 3/4-13/16 inch separation when the pads touch.
Question:	Will this work with the Tipton ultra gun vice
Answer:	Ihave no problem with the quality, it's pretty well made
Question:	Will this work with the gun butler
Answer:	I haven't tried that, specifically, but judging from other things I have done, or couldn't do, I'd say this is probably too light duty. It works great for setting scope rings, cleaning, stock Dremeling, etc. It can't generate the pressure needed to hold through the application of greater force. The foam is a problem, but also its structure. It you apply too much torque to the handle, the arms that actually grip the object start to bend. I use an actual vise for heavier duty tasks. Having said that, I do still really like this vise and use it all the time. It just has its limits. Hope that helps

Product features

Snap Caps

Tipton Snap Caps are a reusable and economical option for adjusting trigger pull, dry fire exercises, and reducing the pressure placed on hammer springs in storage.

Firearm Cleaning

From gun solvents to swabs, Tipton offers a superior line of cleaning products that compliment one another.

Gun Vises

Whether you're cleaning your firearm or running routine maintenance, Tipton's durable range vises are designed to make the job easier.