3 best bladetech holster for glock 17

• Precision-Molded Design
• Flared Rim
• Adjustable Retention
• Tel-Lok Attachment Included
• Ambidextrous Design

User questions & answers

Question:	Is this compatible with FN 509 tac 24rd mags
Answer:	I have a Glock 17 9m. Double stack. The Mag. measures 7/8 in thick and 11/4 in. wide. You have a little room on the thickness because of the tension screw. I hope this helps.
Question:	Will it fit a 1.5” belt
Answer:	Yes, the Tek-Lok will accommodate a belt width up to 2.25".
Question:	Will these fit mags that are for a Taurus PT
Answer:	I would recommend you email the supplier, although the carriers are adjustable, for a loose or snug fit for different rounds. I have a G19 Glock 9mm, which I adjusted for a snug fit, and it possible would fit my 45 mags. I just did not try the fit. Hope this helps, J
Question:	Can the mags be placed either direction for indexing preference? Can pouch pivot to be horizontal
Answer:	Yes, the Mags can face either direction. If the Mag Pouch has the Tek-Lok attachment, it can be adjusted to sit horizontally.

Product features

Tough From the Field to the Range

The Signature Mag Pouch was designed to withstand hard use from on duty to competition. Built to provide a reliable method for carrying magazines, the Signature Mag Pouch can be run on a multitude of belt sizes and configurations. With adjustable retention and flared lips you'll be able to tailor the draw to your preference as well as magazine type.

Modular

Our Signature AR-15 Mag Pouch comes with our legendary Tek-Lok attachment which can accommodate up to a 2.25" belt. Additionally, this Mag Pouch is compatible with our ASR as well as many other attachments.

Adjustable Retention

An adjustable retention screw and rubber spacer ensure that you can tailor your retention to preference. Simply loosen the screw to make for a looser draw, or tighten it down to stiffen it up.

Flared Rim

Our precision molding process allows for greater control in design. We worked in a flared rim to guide the mags for a smoother reholstering and to clear space for faster draws.

• Low-Profile Concealment Attachment
• Dual Sweat Guards
• Ambidextrous Design
• Shirt-Tuck Capability
• Quick-Draw Speed Cut

User questions & answers

Question:	Will this fit a sig sauer p320 x- compact 9mm
Answer:	Dependent upon the style. It will accommodate a belt width of up to 1-1/4” wide comfortably.
Question:	is the width adjustable for a light on the pistol
Answer:	No. It's only held in by retention, meaning thebholstwr is super tight on the taser...
Question:	Does this fit the springfield xd-s osp 9 mm
Answer:	It is injection molded, but almost looks like kydex.
Question:	Will this fit a glock 27 with a trl 6 light/lazer combo
Answer:	The Tek-Lok is adjustable from 1.25" to 2.25". Yes, it'll work well for your Safariland duty belt

Product features

The Ultimate Klipt

Expanding on the Klipt Holster, the Ultimate Klipt adds multiple features while still maintaining a slim, discreet design. With the addition of a concealment wing that presses against the belt, the grip of your firearm is pushed slightly into your body which eliminates the potential for printing. The Ultimate Klipt also boasts a clip that allows you to tuck your shirt in, all while maintaining a firm grasp on your belt.

Enhanced Concealed Carry

The Ultimate Klipt Holster boasts some pretty powerful features for the concealed carrier. With an added concealment wing, the Ultimate Klipt pushes against your belt thus angle the grip of the firearm into your body. This helps immensely with printing.

Built for Comfort

Precision molding allows us to craft holsters that are tight to the firearms dimensions, this keeping the holster as minimal as possible. The distinct rounded corners relieve pressure points allowing for improved comfort.

Adjustable

Built with adjustability in mind, the Ultimate Klipt features adjustable retention as well as the ability to change from right hand to left hand. You can tailor the Ultimate Klipt to your carry style and draw with ease.

• Positive Lock Trigger Guard
• Precision-Molded Design
• Adjustable Retention
• RMR Compatible
• Speed Cut (IDPA Legal)

User questions & answers

Question:	will this fit Glock 19 Gen 5? Glock 19 gen 4 and gen 5 are slightly different in size
Answer:	Yes, since it comes in zipped layers
Question:	Would this holster accomadate the slightly shorter Glock 19 Gen 5 as well as the Glock
Answer:	Yes, it collapses to become relatively small. However, I must tell you that, after 1 use (on a cruise ship from where it never made it off) it went right into the garbage. All that was in it were 2 rolled up twin-sized mattress pads but it split along the bottom seams but not in a way it could be repaired — the material just shredded. And, no, the bag was not overfilled. Perhaps we were just unlucky because the idea was good. To replace it we purchased a duffel bag from Home Depot that has been used many times already and works great. Unfortunately, it does not collapse.
Question:	Will this fit the Glock
Answer:	5 lbs.
Question:	Will this work with high sights
Answer:	Can't tell a specific number but its not heavy at all
Question:	Will this work for the Glock 43x
Answer:	Width 16 and height 18 inches
Question:	Will this Fit a Glock 27 Mag
Answer:	No. The opening to the bag is less than 32 inches. Closer to 26 inches in length.
Question:	Will this pouch fit a ruger lcp 2 magazine
Answer:	I've used this bag on several trips now, and my problem is that the bag has TOO much space for my average 45lbs of clothes/xbox/gear, so the bag is all floppy and the contents are completely jumbled at arrival. While it doesn't hit me with oversize charges or anything like that, I think it's more suited to ground-based travel where it could be filled with more than 50 lbs of clothes etc. I'm now shopping for a slightly smaller bag, along the lines of my previously retired 26x14x14" bag.
Question:	Will these work for metgar mags made for CZ guns and Canik guns
Answer:	Yes the blower is not very loud
Question:	Can you put this on a belt without unbuckling? Can someone post video? Thanks
Answer:	it's approx. 144.36 lbs.
Question:	Basket weave finish
Answer:	Mine is 76.75" x 40.75"
Question:	Is this slim and concealable
Answer:	Hi, we have 90days limited warranty of the table. You can put a table tennis conversion top on it. Thanks!
Question:	Can the mag be rotated
Answer:	Floor would work better then a table if for younger kids
Question:	Will this fit the Glock 43x single stack magazine
Answer:	This air hockey table is designed to store as the full table once it is assembled. We do not suggest to remove the legs for storage
Question:	Will this fit a hkp2000sk
Answer:	Yes, please contact our customer service team at 877-472-4296
Question:	Will they fit on a two inch duty belt
Answer:	I purchased a heavy duty 8 foot pool table cover with an 8" drape - works almost perfectly.
Question:	Will it fit hk vp9 mags
Answer:	I didn't see any difference between mens/womens. The size seemed appropriate for either gender.

Product features

Total Eclipse Double Mag Pouch

The Total Eclipse Mag Pouch is a slim mag pouch built for maximum concealability Outside the Waistband or Inside the Waistband. With a precision molded design, this mag pouch curves with the body for comfort and concealment.

Versatile

Out of the box, the Total Eclipse Double Mag Pouch can be converted from Inside the Waistband to Outside the Waistband just by flipping the included clips. Additionally, you can raise or lower the ride height.

Built for Comfort

Our precision molding process allows us to create gear that is built to be worn. Featuring a curve that hugs the body, the Total Eclipse Mag Pouch is comfortable to wear all day long. It's slim design spares the excess material for maximum concealability.

Quickness

We worked in a flared lip to guide the mags for a smoother reholstering and to clear space for faster draws. Pair that with adjustable retention and you've got the perfect draw every time.

Tough From the Field to the Range

The Signature Mag Pouch was designed to withstand hard use from on duty to competition. Built to provide a reliable method for carrying magazines, the Signature Mag Pouch can be run on a multitude of belt sizes and configurations. With adjustable retention and flared lips you'll be able to tailor the draw to your preference as well as magazine type.

Perfect Fit

Our Signature Single Mag Pouch comes with our legendary Tek-Lok attachment which can accommodate up to a 2.25" belt. The included belt shim allows for you to get the perfect fit on your belt

Adjustable Retention

An adjustable retention screw and rubber spacer ensure that you can tailor your retention to preference. Simply loosen the screw to make for a looser draw, or tighten it down to stiffen it up.

Flared Lip

Our precision molding process allows for greater control in design. We worked in a flared lip to guide the mags for a smoother reholstering and to clear space for faster draws.

Total Eclipse Single Mag Pouch

The Total Eclipse Mag Pouch is a slim mag pouch built for maximum concealability Outside the Waistband or Inside the Waistband. With a precision molded design, this mag pouch hugs tight to the body without discomfort.

IWB or OWB

The Total Eclipse Single Mag Pouch can be flipped from Outside the Waistband or Inside the Waistband. It's slim design and versatile clips make it as simple as flipping the mag pouch around.

Built for Comfort

Our precision molding process allows us to create gear that is built to be worn. Featuring a low-profile design that hugs tight to the body, the Total Eclipse Mag Pouch is comfortable to wear all day long. It's slim design spares the excess material for maximum concealability.

Quickness

We worked in a flared lip to guide the mags for a smoother reholstering and to clear space for faster draws. Pair that with adjustable retention and you've got the perfect draw every time.

The Signature

With a pedigree derived from our legendary Classic OWB Holster, our Signature Holster pushes the bar forward. Made from an exceptionally strong proprietary blend of polymers, the Signature touts the same features that make the Classic so beloved. With it’s IDPA legal speed cut, RMR compatibility, wide range of belt attachment compatibility, and precision molding - it’s easy to see why it’s favorite by competitive shooters all over the world.

Precision molded means you’ve got a holster that is the perfect fit for your firearm. Engineered to have a positive locking trigger guard, the Signature will keep your firearm in place even during the most rigorous training.

Precision Molded in the USA

Our design process allows us to craft holsters that are more form fitting than traditional kydex. Starting with 3D scanning technology, we build holsters exactly to the dimensions of the firearm. This gives you a positive lock trigger guard as well as little movement of the firearm while it's in the holster.

IDPA Legal Speed Cut

With the input of top competitive shooters, we added a Speed Cut to the Signature Holster. This cut allows for the muzzle of the firearm to clear the holster more quickly for faster draw times. Also, the cut allows for Pistol Mounted Red Dot Sights.

Modular Mounting

The Signature mounting hole pattern allows for more than adjustable cant. It opens up the doors to all of our other attachments. From our drop and offset to our TMMS, we've got options for all styles of carry.