12 best blackhawk 1911 holsters

Product description

This unique holster design allows you to forget old-fashioned thumb breaks that slow your draw and complicate re-holstering. The patented SERPA Technology lock engages the trigger guard as you holster the pistol and won't let go until you release it. The release is made using your normal drawing motion, with the trigger finger beside the holster body. Plain Matte Black Finish. SERPA Technology Features: Full firing grip for draw and immediate retention upon re-holster. No thumb break or awkward middle finger release to slow down your draw. Speed cut allows fasater draw and easy re-holster

• SERPA Auto Lock release and Passive retention detent adjustment screw
• Speed-cut design for rapid draw, target acquisition and re-holster
• Includes Belt Loop Platform and Paddle Platform
• Fits 1911 Gov't and Clones with or without rail
• This holster will not fit polymer frame Taurus Judges
• Fits 1911 Gov't and Clones with or without rail
• Passive retention detent adjustment screw and SERPA Auto Lock release

User questions & answers

Question:	What size would fit my sw sd40 ve
Answer:	Will fit size 25. Same as 9
Question:	Springfield
Answer:	It fits very well
Question:	What size do I get for the Colt 45 officer
Answer:	Typically these holsters are made for a specific range of models. Example glock 22 & 17. Try searching for your model. Its a type of 1911? Try searching for a 1911 with a similar slide length.
Question:	I carry a Citadel full size 1911. Will the end of the pistol be covered completely? Or will it hang out at the bottom
Answer:	No it won't; they make this for a full sized 5" 1911, so it will also fit the shorter barreled models, but it covers the entire barrel of a 5" pistol.

Product features

BLACKHAWK! SERPA CQC Concealment Holster

Featuring our SERPA Auto-Lock technology, the SERPA CQC Concealment Holster delivers a smooth draw, easy re-holster and unparalleled handgun security in a sleek package that is perfect for concealed carry.

Features

• SERPA Auto-Lock technology

• SERPA Auto Lock release

• Passive retention detent adjustment screw

• Speed-cut design for rapid draw, target acquisition and re-holster

• Includes Belt Loop Platform and Paddle Platform

• Fits Shoulder, S.T.R.I.K.E., Quick Disconnect and Tactical Holster Platforms

• Look for our distinctive and unique L shaped button

• Built to withstand the toughest Terrain and environments
• Immediate retention and audible click upon re-holster for security
• Fits SandW 5900/4000 9/40 series including TSW
• Gunmetal gray holster body with black SERPA Auto Lock release
• Passive retention detent adjustment screw
• Immediate retention and audible click upon re-holster for security
• Includes paddle platform only

User questions & answers

Question:	Will this fit a taurus pt 111 millennium pro g
Answer:	What size did u get for the pt111 g2
Question:	Will it fit a sd9ve 9mm and is it left hand oriented
Answer:	I have the SDVE.40 and this holster (Size 25) will fit either the Smith and Wesson SDVE .40 or the 9mm. It comes in both left or right handed, and is a Level 2 Retention Holster. One note for this holster is that if you intend to use it for duty, then you will want a duty belt holder for the holster (A separate cost item.)
Question:	Will this holster work with the ruger lc
Answer:	Definitely not
Question:	Will this holster fit a s&w sw9ve
Answer:	Yes. It fits perfectly. That is the handgun it was made for. Also fits the Ruger SR series 9mm and 40.

Product features

About us

Blackhawk

In 1990, a Navy SEAL was navigating a minefield when his pack failed. As his gear tumbled to the ground, he vowed that if he got out of there alive he would make gear the right way. Today, this commitment to quality and reliability applies to everything we do. We’re constantly researching, refining and perfecting every detail to provide products. At Blackhawk, we're not just making gear; we’re honoring a vow.

About Blackhawk!

Product description

Multiple holsters for multiple handguns is no longer an Issue. The BLACKHAWK! Omnivore is a Multi-Fit holster that accommodates more than 150 styles of semi-automatic handguns with an accessory rail. The active retention mechanism locks onto our proprietary rail attachment device, not the frame of the handgun. A thumb release disengages the locking mechanism when drawing the handgun. The Omnivore represents the future in retention holster technology, and delivers unparalleled firearm access.

• Multi-fit - omnivore holsters fit more than 150 styles of semi-automatic handguns with an accessory rail (Compatible with surefire x300u-a light System)
• Active retention mechanism- ergonomic thumb- Activated retention mechanism delivers instant firearm access
• Level 2 retention - uses two features to hold handgun securely in place
• Free-floating design - holster locks onto rail attachment device, doesn't wear firearm's frame and finish
• 3-position adjustable release - height of thumb- Activated retention mechanism adjusts to fit your hand

User questions & answers

Question:	Will this fit a sig P320 rx (red dot sight), its the full size 9mm
Answer:	No, it does not.
Question:	This is right or left holster
Answer:	I have not used it in that capacity yet, but I know it can do it with the proper formula.
Question:	I have a compensator on my gun. Will it fit into the holster? Does it have an open bottom? Or is there a length and width limit
Answer:	Nope, this is a counterfeit copy of an ancient Casio fx-6200G from 1991. Modern Casio fx-9750GII can do so much more and with fewer keystrokes too.
Question:	Will it fit with the surefire x300u-B
Answer:	Not really, it works great until you drop it.

Product features

BLACKHAWK! Omnivore MultiFit Surefire X300U-A Light Bearing Holster

Multiple holsters for multiple handguns is no longer an issue. The BLACKHAWK! Omnivore multi-fit family of holsters accommodates more than 150 styles of semi-automatic handguns.

Our proprietary retention mechanism locks onto the SureFire X300/X300U-A for the light bearing models.

The instinctive thumb release disengages the locking mechanism from the Rail Attachment Device when drawing the handgun.

Quick Thumb Release

Delivers instant access to your handgun, critical in high-pressure situations.

Adjustable 3-position thumb release, customization for any hand size.

The thumb release will not engage in the firearm is being pulled on.

Free-Floating Design

Holster does not contact the frame, preventing wear on the finish.

Allows debris to fall through, without getting trapped-reducing jamming.

Extra clearance allows for easier holstering and fits a wide range of custom add-ons.

True Multi-Fit

Fits almost any semi-automatic handgun with an accessory rail.

Available in light bearing models for both SureFire and Streamlight.

Explore our unparalleled list of compatible guns.

Level 2 Retention

Locks directly to our Rail Attachment Device, not your handgun's frame.

Uses a thumb-activated retention mechanism to secure your firearm.

Superior strength to weight ratio against any other retention system.

Product description

Blackhawk has a history in making the highest quality tactical and outdoor gear in the world. Trusted by military, outdoorsman, and recreational users throughout the world, when you need something to work, Blackhawk never lets you down.

• Quality tested in the field, made of quality materials
• Built to withstand the toughest terrain and environments
• Don't sacrifice price for quality, with Blackhawk you get what you pay for
• Fits Glock 17, 19, 20, 21, 22, 23, 31, 32 and SandW MandP 9/40
• Passive retention detent adjustment screw and SERPA Auto Lock release
• Full-length holster body protects rear sights
• Reduced gun profile supports community-friendly look
• Includes angle-adjustable jacket-slot belt loop

User questions & answers

Question:	Will this holster fit a Beretta 92FS
Answer:	If i recall algebra 2....i think it will perform the trignometry aspect perfectly. Most of it is writing in variables (x and ys)
Question:	will this fit the cz97b
Answer:	Great buy for a 7th grader.. This is a great calculator as a student is getting ready to start pre-algebra and algebra subjects. For most students those are subjects taught in 7th, 8th, and 9th grades, so this will be a good calculator to use currently and grow with.
Question:	Why won’t the Beretta 92A1 not fit in the beretta holster
Answer:	Yes it has a slide on cover.
Question:	Why will this not fit a 92 a
Answer:	This is one calculator. TI-34 is the model number

Product description

Blackhawk has a history in making the highest quality tactical and outdoor gear in the world. Trusted by military, outdoorsman, and recreational users throughout the world, when you need something to work, Blackhawk never lets you down.

• Swivel buckles on belt loops
• Fits Glock 17, 19, 20, 21, 22, 31, 32 and SandW MandP 9/40/45
• Flexible thigh platform conforms to leg size and Y-harness suspension system distributes weight evenly, keeps holster vertical when kneeling, and allows use of pants pocket
• Quick-disconnect swivel buckles allow superior flexibility and quick holster mounting and dismounting and offers accessory mounting locations for pouches, knives, mag cases, etc.
• Rubberized leg straps eliminate sliding
• Passive retention detent adjustment screw and SERPA Auto Lock release

User questions & answers

Question:	They ask what size there is no reference next to the numbers they give what size do I need for a glock 17 and
Answer:	Yes, provided you have an X300 type light to go with it. The way it's cut, optics fit just fine.
Question:	will it fit my sig p250 compact
Answer:	Right. It says it in the title.
Question:	Will this fit a glock 20sf gen
Answer:	Depends, I have a Glock 17 with a KKM compensator and it fits without issues. If you have a long slide gun like a Glock 34 with a compensator it probably won't fit. But anything short then a 4.5 inch barrel and 1 inch long compensator should fit
Question:	will this fit a 1911 with rail
Answer:	No it doesn't.

Product description

BLACKHAWK has a history in making the highest quality Tactical and outdoor gear in the world. Trusted by military, outdoorsman, and recreational users throughout the world, when you need something to work, BLACKHAWK never lets you down.

• Quality tested in the field, made of quality materials
• Built to withstand the toughest Terrain and environments
• Don't sacrifice price for quality, with Blackhawk you get what you pay for
• Fits SandW MandP 9/40
• Passive retention detent adjustment screw and SERPA Auto Lock release
• Thumb-activated Pivot Guard for additional security - No thumb break or awkward middle finger release to slow down your draw
• No snaps or hoods to accidentally open
• Includes angle-adjustable jacket-slot belt loop

User questions & answers

Question:	So it wont fit the p365 XL
Answer:	Please use the oil which marked 4 stroke, you can use the same 4 stroke engine lawnmower
Question:	Will this holster fit the hipoint CF380? been looking and trying to compare sizes of other guns that will match this one
Answer:	Hi, we PX-Trunk have checked twice before we pack up each package, our products are fulfilled by Amazon, so it may missing during the transport, we will send the hose to you for free, please leave your order number here, we will get in touch with you soon, or you can email us via Amazon. Thank you for purchasing from us
Question:	Will this fit the 96a1 with rail
Answer:	Dear customer, battery and charger will come with our leaf blower.
Question:	Will any glock 19 9mm any gen fit this holster
Answer:	This battery is WORTH upgraded 4.0 Ah lithium-ion battery with 84V, providing you with more powerful and full air power and wind capacity. There are three battery indicators for you to check the battery as needed.

Product features

About us

Blackhawk

In 1990, a Navy SEAL was navigating a minefield when his pack failed. As his gear tumbled to the ground, he vowed that if he got out of there alive he would make gear the right way. Today, this commitment to quality and reliability applies to everything we do. We’re constantly researching, refining and perfecting every detail to provide products. At Blackhawk, we're not just making gear; we’re honoring a vow.

About Blackhawk!

Product description

In 1990, a Navy SEAL was navigating a minefield when his pack failed. As his gear tumbled to the ground, he vowed that if he got out of there alive he would make gear the right way. Today, this commitment to quality and reliability applies to everything we do. We’re constantly researching, refining and perfecting every detail to provide products that won’t let you down. At Blackhawk, we're not just making gear; we’re honoring a vow.

• Mission: To always put the needs of our men and women in uniform at the forefront of everything we do in an effort to better serve those who serve and protect us all.
• Commitment to quality and reliability applies to everything we do

User questions & answers

Question:	Will this work for my kimber custom khx or
Answer:	This should fit exact, as the frames are the same. You may need to adjust the side screw to preferance, but should fit perfect.
Question:	Would this work with the safari land qls
Answer:	No. The frame is too wide. That model won't fit anything kydex that blackhawk makes. I would suggest finding somewhere that sells kydex holsters and see which one comes closest to fitting. Buy it, then take it home and do a little sanding on the interior of the holster to make it fit. I've done that to many of my guns. I love Blackhawk but they really only cater to the well known guns. Of course, you can always go the leather or textile route. Good luck!
Question:	Will this fit a full sized single stack, rock island
Answer:	There different Beretta pistol and they don't fix some of the holster you have to make sure to order the right holster for you handgun I ran into this also!
Question:	Size 03 says "most clones." Can anyone who has a Kimber pro carry ii with a 4" barrel verify that it fits a 03 holster
Answer:	As info: This should fit an M9A1 but while a 92A1 may fit and click, the retention may not be rock solid. The L2 retention (the click) engages the trigger guard on the weapon when holstered. The M9A1 has a squared trigger guard while the 92A1 has a rounded trigger guard. Both have a rail. The minimal variance in the thickness of the trigger guard may present an opportunity for the M92A1 to not seat properly and/or seat too low resulting in wiggle room and highly unlikely contact with a modified trigger. In a safe carry condition 2 method of round chambered and hammer down, there is no chance of accidental discharge in the previously outlined scenario. Draw and retention shouldn't be an issue, however, over insertion or a little wiggle room in a condition 1 carry scenario (round chambered and hammer back) with the M92A1 and a sweet or really crappy trigger job could cost you a toe. Not likely but.....stuff happens and the company understands liability. Not saying it wont do the job as others have mentioned (I'm M9A3 and don't have a 92A1), just outlining the difference between the models and how that difference interacts with the mechanics of the retention system. Lastly the retention system on the Serpa holsters is designed not to allow the release on the holster to be depressed when the weapon is actively being pulled. Press and pull, not the other way around. Its part of the overall safety in a weapon grab scenario. The thinner, rounded trigger guard on the 92A1 could negate or minimize that friction point and safety feature. Keep in mind the guy who started this company was an ex Navy Seal that was motivated by a real life gear failure in the field. Blackhawk is after perfection and passing rigorous government and LE testing scenarios. It's the one in a million test cases that they are out to mitigate. Hope they start making T-1s to fit the railed Berettas.

Product features

BLACKHAWK! SERPA CQC Concealment Holster

Featuring our SERPA Auto-Lock technology, the SERPA CQC Concealment Holster delivers a smooth draw, easy re-holster and unparalleled handgun security in a sleek package that is perfect for concealed carry.

Features

• SERPA Auto-Lock technology

• SERPA Auto Lock release

• Passive retention detent adjustment screw

• Speed-cut design for rapid draw, target acquisition and re-holster

• Includes Belt Loop Platform and Paddle Platform

• Fits Shoulder, S.T.R.I.K.E., Quick Disconnect and Tactical Holster Platforms

• Look for our distinctive and unique L shaped button

Product description

Featuring a unique speed-cut design, the CQC Holster allows for smooth draw and easy re-holster without slowing you down. The patented SERPA Auto Lock release delivers unparalleled weapon security and is automatically positioned to facilitate a correct drawing motion, making it the perfect Level 2 retention holster for concealed carry. Features: - Passive retention detent adjustment screw and SERPA Auto Lock release - Reinforces full master grip and superior draw technique - Immediate retention and audible click upon re-holster for security - Speed-cut design allows rapid draw, target acquisition, and re-holster while keeping eyes on target - Includes belt loop and paddle platform. Specifications: - Fits: 1911 Commander - Color: Black - Right Hand

• Full firing grip for draw and immediate retention upon reholstering
• No thumb break or awkward middle finger release to slow down your draw
• Speed cut allows faster draw and easy reholstering
• Active Retention
• Matte Finish offers the strength and reliability
• This holster will not fit polymer frame Taurus Judges
• Fits Commander 1911 and Clones with or without rails

User questions & answers

Question:	Does this holster for the 1911 hold the thumb safety up and in place
Answer:	It is not fit, this holster is specialized in the custom for Glock.
Question:	I have a Roger cmd, it is 4.25 inch will the barrel stick out the bottom
Answer:	Yes, is suitable for
Question:	Will this holster work for a ruger sr1911 5 inch slide and a 4.25 commander type
Answer:	Unfortunate no, this holster will only fit the pistol if it has no attachments.
Question:	Does anyone know if the cz or the 1911 will fit a Star 30M? Its like a cz mixed with a
Answer:	I'll say yes. Unless you have some odd aftermarket accessory
Question:	Is it compatable with the sig p320 x5 9 legion
Answer:	Yes glock 20 and 21 same frame
Question:	Does size 61 in black come with both attachments
Answer:	I had an sd9 and it would fit into most glock 17 holsters. Just search "Blackhawk glock 17" and the one in the search should be the model that fits it.
Question:	Will this fit an m
Answer:	Not sure but it does fit my glock 43 perfect
Question:	Will a p320 Carry with a threaded barrel fit
Answer:	I say no it doesn't. If the FNS .40 caliber pistol is not listed in the drop-down list then Serpa hasn't designed one for it yet.

Product features

BLACKHAWK! SERPA CQC Concealment Holster

Featuring our SERPA Auto-Lock technology, the SERPA CQC Concealment Holster delivers a smooth draw, easy re-holster and unparalleled handgun security in a sleek package that is perfect for concealed carry.

Features

• SERPA Auto-Lock technology

• SERPA Auto Lock release

• Passive retention detent adjustment screw

• Speed-cut design for rapid draw, target acquisition and re-holster

• Includes Belt Loop Platform and Paddle Platform

• Fits Shoulder, S.T.R.I.K.E., Quick Disconnect and Tactical Holster Platforms

• Look for our distinctive and unique L shaped button

BLACKHAWK! SERPA CQC Concealment Holster

Featuring our SERPA Auto-Lock technology, the SERPA CQC Concealment Holster delivers a smooth draw, easy re-holster and unparalleled handgun security in a sleek package that is perfect for concealed carry.

Features

• SERPA Auto-Lock technology

• SERPA Auto Lock release

• Passive retention detent adjustment screw

• Speed-cut design for rapid draw, target acquisition and re-holster

• Includes Belt Loop Platform and Paddle Platform

• Fits Shoulder, S.T.R.I.K.E., Quick Disconnect and Tactical Holster Platforms

• Look for our distinctive and unique L shaped button

• Multi-Fit - Omnivore Holsters Fit More Than 150 Styles Of Semi-Automatic Handguns With An Accessory Rail
• Active Retention Mechanism- Ergonomic Thumb- Activated Retention Mechanism Delivers Instant Firearm Access
• Level 2 Retention - Uses Two Features To Hold Handgun Securely In Place
• Free-Floating Design - Holster Locks Onto Rail Attachment Device, Doesn't Wear Firearm's Frame And Finish
• 3-Position Adjustable Release - Height Of Thumb- Activated Retention Mechanism Adjusts To Fit Your Hand

User questions & answers

Question:	Will it fit a Glock 19x
Answer:	Yes. Very sharp. Clean cut. Better leverage with thick handles
Question:	will it fit a ruger P 94 .40 cal
Answer:	There is no writing anywhere on the clippers except the manufacturer's name, Duvilo. I cannot tell where they were made but they are a high-quality product. It looks as if it is made from surgical-grade steel.
Question:	Will it work for 4 inch barrel, K-frame revolvers
Answer:	THE HANDLE LENGTH IS 3" . OVERALL LENGTH IS 5". BUT VERY SHARP.
Question:	Will it fit a taurus pt
Answer:	These are good quality, easily used clippers......I'm very happy with them. There is no info on the clippers regarding where they are made, and their packaging, if it contained any manufacturer info, is long gone. I tried to do a bit of Google research to find where these Duvilo clippers are made, and again came up empty.

Product features

BLACKHAWK! Omnivore Multi Fit Non Light Bearing Holster

Multiple holsters for multiple handguns is no longer an issue. The BLACKHAWK! Omnivore multi-fit family of holsters accommodates more than 150 styles of semi-automatic handguns.

The active retention mechanism locks onto our proprietary Rail Attachment Device, not the frame of the handgun for the non-light bearing model.

The instinctive thumb release disengages the locking mechanism from the Rail Attachment Device when drawing the handgun.

Quick Thumb Release

Delivers instant access to your handgun, critical in high-pressure situations.

Adjustable 3-position thumb release, customization for any hand size.

The thumb release will not engage in the firearm is being pulled on.

Free-Floating Design

Holster does not contact the frame, preventing wear on the finish.

Allows debris to fall through, without getting trapped-reducing jamming.

Extra clearance allows for easier holstering and fits a wide range of custom add-ons.

True Multi-Fit

Fits almost any semi-automatic handgun with an accessory rail.

Available in light bearing models for both SureFire and Streamlight.

Explore our unparalleled list of compatible guns.

Level 2 Retention

Locks directly to our Rail Attachment Device, not your handgun's frame.

Uses a thumb-activated retention mechanism to secure your firearm.

Superior strength to weight ratio against any other retention system.

Product description

BlackHawk CQC Carbon - Fiber Holster with SERPA Technology, Matte Finish, with active retention system! Here's good news... you can forget about those thumb-breaks that slow down your draw and make re-holstering awkward! It has patented SERPA Technology lock engages the trigger guard as you holster the pistol and will not let go until you release it. The release is made using your normal drawing motion, with the trigger finger beside the holster body. Buy now at an affordable, budget-pleasing Guide price! SERPA Technology features: Trigger finger naturally comes to rest on the SERPA Technology lock release mechanism; Push the mechanism as you draw the weapon and it releases the gun for a smooth, fast draw; Swivel buckles on belt loops allow articulation for maximum flexibility; All BlackHawk CQC SERPA Technology holsters come with both belt loop and paddle platform; Belt loops: 2 1/4"; Black color; Made in the USA. State Gun Type, and Left or Right-Hand Holster. Order your Holster today! AVAILABLE SEPARATELY: BlackHawk CQC Carbon Fiber Holster, Matte Finish S&W J-Frame; BlackHawk CQC Carbon Fiber Holster, Matte Finish Springfield Xd; BlackHawk CQC Carbon Fiber Holster, Matte Finish SIG 220 / 226; BlackHawk CQC Carbon Fiber Holster, Matte Finish SIG 228 / 229; BlackHawk CQC Carbon Fiber Holster, Matte Finish, Beretta 92 / 96; BlackHawk CQC Carbon Fiber Holster, Matte Finish, Glock 17 / 22 / 31; BlackHawk CQC Carbon Fiber Holster, Matte Finish, Glock 26 / 27 / 33; BlackHawk CQC Carbon Fiber Holster, Matte Finish Glock 19 / 23 / 32 - word search in our store for 'BlackHawk'. BlackHawk CQC Carbon Fiber Holster, Matte Finish, Colt 1911

• BlackHawk 410503CT-R
• Firearm Accessories > Holsters
• SKU VL-2172068
• UPC: 648018009426

User questions & answers

Question:	Will this fit a kimber pro carry 2 with 4 inch barrel? Anyone have pictures
Answer:	your size is 0. That will fit glocks 17, 19, 20, 21, 22, 31 and 32. will also fit a M&P 9mm,40cal and 45. Make sure when you order you check right or left handed, unless you want one riding on each thigh, then order one of each.
Question:	will this fit my SIG Sauer 1911 wih rail and 5 in barrel
Answer:	I dont think so, best way to check is to go onto blackhawks website and check through there, and possibly find the actual serial number for the holster, I remember seeing some sigs it'd got but I don't remember seeing a p250compact
Question:	Will this fit with a compensator
Answer:	Yes, you should be able too get anything you want .
Question:	will this fit the elite force 1911 TAC co2 blowback
Answer:	Yes it will, I have a full size 1911 with rail and have no issues.

Product description

Blackhawk has a history in making the highest quality tactical and outdoor gear in the world. Trusted by military, outdoorsman, and recreational users throughout the world, when you need something to work, Blackhawk never lets you down.

• Quality tested in the field, made of quality materials
• Built to withstand the toughest terrain and environments
• Don't sacrifice price for quality, with Blackhawk you get what you pay for
• Fits Commander 1911 and Clones with or without rails
• All BLACKHAWK! SERPA CQC Concealment Holsters come with both belt loop and paddle platform
• Includes belt loop and paddle platform
• Passive retention detent adjustment screw and SERPA Auto Lock release
• Immediate retention and audible click upon re-holster for security

User questions & answers

Question:	Does this holster fit a
Answer:	It fits any size 1911 without a rail.
Question:	Will this fit a RIA 1911 commander tac ultra 10mm
Answer:	It’s for any 1911 style/clone but will not work if you have a rail on the bottom I think you could bolt it to it but not sure free returns lol
Question:	Does the Ruger 1911 Commander fit in this hoster
Answer:	I agree with highground answer. It fits my full-size PX for storm... But as highground answered you should check with the manufacturer they have been very good at answering questions.
Question:	Does this holster fit a para balck ops
Answer:	I have a Kimber Pro CDP 2 and it does fit. It may not fill the entire length of the holster, but it does fit.

Product description

The standard CQC holster has a pressure adjustable detent retention system that grabs onto the pistol's trigger guard and holds tight. The holster is only available in matte finish. It includes a belt loop and paddle platform.

• Pressure adjustable detent retention system grabs onto the pistol’s trigger guard and holds tight
• Matte Black finish
• Includes belt loop and paddle platform
• Fits S&W M&P 9/.40, SD 9/.40 and Sigma

User questions & answers

Question:	Does this hard holster scratch or marr the finish of your gun
Answer:	I believe it will fit, but a little too long
Question:	Will fit a 9mm xdm with a 3.8 barrel
Answer:	It will fit a SIG Sauer 1911 with a 5 inch barrel, but I doubt it will fit one with a rail. Why don't you call BlackHawk?
Question:	Is this for the Shield
Answer:	The answer to that question depends entirely on the shape of the compensator. If the device extends beyond the width or height of the slide at the muzzle it will not fit.
Question:	Is this holster for right hand, and will it fit the xds with 4" barrel. because the picture shows left hand model
Answer:	It should fit the 1911 model, unless your 1911 Model has a rail on the bottom in front of trigger guard for a light or laser, then it might not fit at all or be too tight to properly holster or unholster the weapon. Hope this helps out.