12 best attwood kayak carts

Product description

This Attwood Kayak and Canoe Cart makes it easy for one person to transport a kayak or canoe, even across uneven terrain. This cart features enhanced, large-diameter wheels that cannot deflate. With this cart, it’s easy to move a kayak or canoe during a portage or while moving the craft between a launch point and parking lot, campsite, or cabin. The cart disassembles easily to fit into most kayak hitches, and it holds loads of up to 100 pounds. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 150 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

• Makes it easy for one person to transport a kayak or canoe
• Ideal for crossing uneven terrain
• Features enhanced, large-diameter wheels that cannot deflate
• Carries kayak or canoe on a portage or between a launch point and parking lot, campsite, or cabin
• Disassembles easily to fit into most kayak hitches
• Holds loads of up to 100 pounds

User questions & answers

Question:	Will it fit my Old Town Sportsman
Answer:	Yes this item has a Aluminum frame.
Question:	What the Axle bore size
Answer:	It worked great on a 2 person canoe. Just make sure you strap it tight. Especially if you hit a bunch of rocks. And set it in the middle will stay on easier.
Question:	Is it an aluminum frame
Answer:	If by "tube" you mean some vertical piping that extends up through your scupper holes to keep the trolley aligned, then no, there are no tubes. I found this trolley a little squirrely with a heavy kayak. Wouldn't stay aligned and resistant to pull (really had to pump tire pressure up), but that would be true of any of this style of trolley. I eventually replaced this with the Railblaza C-TUG, which is light years better, but significantly more expensive. If you want a cheap way to move a relatively light kayak around, this is adequate, but understand the shortcomings in advance. Also, you might get better answers if you elaborate what you mean by tube.
Question:	Will this product work with a Lifetime sport fisher? (tandem with a "tunnel" keel, concerned about fit
Answer:	They have air in them but but not completely inflated, use an air compressor, go to gas station with a place to put air in an automobile tire

• Practical: Use the ABN Universal Boat Carrier to cart your kayak, canoe, paddleboard, float mat, or jon boat
• Durable: Has a 200-pound weight limit; Constructed from high-strength anodized steel to ensure longevity while also keeping the carrying weight at a minimum (8lbs)
• Tire Design: 9.5” knobby tires that are easy to inflate; Allows for smooth movement across rough surfaces such as sand, gravel, and through wooded areas
• Features: Oversized foam bumper pads protect your vessel from scratches or dents; Designed with a 12-foot tie down strap to secure your vessel; Includes a spring-loaded kickstand for quick and easy loading
• Compact: Folds for easy storage and transport; Tires can be easily removed with the lynch pin; Entire carrier can be stored in a large backpack or in your vessel while on the water

User questions & answers

Question:	how does this work for paddleboards
Answer:	I would say very similar to how it works on a kayak. It is strapped toward one end of the vessel and should roll easily
Question:	I will be using this on a six day 165 mi canoe trip. How small does this fold up and how much does it weigh? Size and weight matters
Answer:	It folds up to a pretty compact size but it will take up space in your canoe for the trip while you're in the water. It depends on how big the canoe is and how much space you have for cargo during your canoe trip.
Question:	Can I hook this to the back of my golf cart
Answer:	No, the carrier is place to the rear of the Kayak. You might be able to attach the front of the Kayak to the rear of the golf cart although it is doubtful the Kayak will stay on the carrier if you reach hit bumps, holes or rocks or increase speed. This carrier is made so you place the wheels under the Kayak toward the rear and pull the Kayak from its front strap.
Question:	Would this work for a Hobie 14' Pro Angler
Answer:	My one person kayak is 50lbs and I transport about 100 meters from my house to the water's edge. Your hobie 14 is 122lbs empty. I do not think this is the correct carrier for you. You need a wider/stronger carrier.

Product features

About Universal Boat Carrier – Trolley for Carrying Kayaks, Canoes, Paddleboards, Float Mats, and Jon Boats

Stop dragging your kayaks and canoes on damaging surfaces! With ABN's Universal Boat Carrier, you can focus on getting onto the water hassle-free.



 

Universal Carrier

Every outdoor enthusiast needs the ABN Universal Boat Carrier. It takes the hassle out of transporting items and works great with a variety of watercrafts. 

Simple and Convenient

The cart's 9-½” knobby tires are easy to inflate (bike pump not included) and allow for streamlined movement over a variety of terrain.

Portable

The carrier folds down for simple storage and transport.



The tires can be quickly removed with the removal of lynch pin and can be conveniently stored in a large backpack or right in the kayak with you while out exploring on the water.

 

Practical

The ABN Universal Boat Carrier includes a 12-foot tie down strap to secure your kayak, paddle board, boat, or floating mat and a spring-loaded kickstand provides for for quick and easy loading.



It also includes oversized foam pads to protect your kayak from getting scratches or dents while in use.

 

Durable

Constructed from high-strength anodized steel to ensure longevity while also keeping the carrying weight at a minimum (8lbs). 



The ABN Universal Boat Carrier has a 200-pound weight limit.

Who We Are

Auto Body Now is a family owned company based out of South Dakota. We provide the Midwest with the highest quality auto body supplies and car care products on the market. We have an exceptionally strong Internet presence, sending over 50,000 products each month. In fact, if you have purchased any of your auto body supplies or car care supplies online, there is a good chance we have had the opportunity to serve you.

• Included Components: Multi-Function Sport Light
• The Package Height Of The Product Is 5.08 Centimeters
• The Package Length Of The Product Is 32 Centimeters
• The Package Width Of The Product Is 18.8 Centimeters

User questions & answers

Question:	does this come with a rail mount as well
Answer:	You need to measure between mounting holes (side to side on your camper).. should be about 66 3/4" or so.. if you can't do that... my neighbor used u bolts to mount. All pressure from the stabilizers is pushing up so the u bolts just hold them up while traveling. These are great and I wish I would have done it sooner... look for warehouse returns.. I got one for quite a big discount on Amazon. Good luck
Question:	Battery powered
Answer:	Yes
Question:	How many lumens
Answer:	Opaque clear & yes, you can see what is inside.😉 Bought mine to use as an ice bucket for camping. It is an AWESOME product!!😊
Question:	would this mount to go pro accessories? Has anyone tried that
Answer:	9 inches. The bucket was bigger than I was expecting. Not like a sandpail, more of a hotel ice bucket.
Question:	What are the length of each side of the table
Answer:	No it is not.
Question:	Does this have a bolt to secure it to the wall so it doesn't topple onto a child
Answer:	Yes and there would be extra room
Question:	Does anyone have the dimensions prior to assembly (while still in packaging?) trying to figure out if this can be transported in my jetta
Answer:	No. It's woodgrain printed on stainless steel.
Question:	What's the material
Answer:	The bucket has a teakwood grain printed on stainless steel. It is a handsome piece and high quality, but it is not real wood.

Product description

No need for a dedicated, and ugly, kayak carrier strapped to your car’s roof. This kit provides everything you need for safe, easy transportation, then it quickly removes and stores away. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

• Includes supporting foam blocks
• Two straps with adjusting buckles and clips
• Includes 15-Feet of polypropylene rope

User questions & answers

Question:	The product description says that there are 4 foam blocks in the kit, but it appears that there are only 2 in the picture. Are they separate parts
Answer:	Not really , does not interfere with your vision , the strap does be about 4 to 3 inches down from the inside of the roof of car , hope this helps
Question:	Does the foam block have a bottome slit so they can wrap around the cross bars on a roof rack? What are the dimensions of the foam blocks
Answer:	If traveling that long of distance, I would recommend getting additional straps for the body of the kayak and a front and back trap as well. Safe journey!
Question:	can you use these on a prius
Answer:	Depends on how much whatever you are hauling weighs ...as the max weight capacity for this item is 110 lbs. But I found this works really well to haul my 85lb kayak on my cars rooftop. I just had to use a couple bungees to tie down the front and the rear for added security on the highway/freeway. This product even comes with a heavy duty stow bag for when its not in use. Probably the next best thing compared to a mounted unit. Fit my needs well.
Question:	What is in this kit? It SAYS "4 foam" but one picture shows one hull-shaped piece and something else. Tia for the facts
Answer:	It’s just a durable soft cushion that has a rubber base and rings for a tie down. You can use it to carry whatever you like: kayak, couch, dead hooker, whatever...

Product description

This Attwood Flexible Grab Handle With Overmolded Grip is a versatile and reliable grab point that can be installed in a wide variety of locations to provide a sure grip on an object such as a swim platform. This grip can be flush-mounted and its strength and flexibility make it an effective grab point for a person climbing onto a platform, climbing stairs, or in a cockpit or companionway. It flexibility allows it to be mounted onto irregular surfaces and angles. It is made of soft polypropylene webbing over a semi-rigid core. With its soft, pliable webbing and the absence of sharp edges, this handle is safe for use in areas where people might come in contact with it. All materials are non-corrosive, UV-stable, and mildew-resistant. This handle meets the ABYC H-41 standard for strength, and it has 4 holes for the required #12 fasteners. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

• Versatile, flexible and reliable grab point
• Can be installed on swim platform, in cockpit, in companionway
• Can be mounted onto irregular surfaces and angles
• Has 4 holes for the required #12 fasteners

Product description

Don’t worry about losing or having to replace your kill switch key; this 7-key set’s got you covered for Johnson, Evinrude, Mercury, Yamaha, Suzuki, Tohatsu, and Honda engines. Tangle-free design keeps this crucial accessory ready at all times. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years.

• Package length: 17.78 cm
• Package width: 10.16 cm
• Package height: 2.79 cm
• Product Type: ELECTRONIC SWITCH

User questions & answers

Question:	Will this work on 2018 sun tracker fishing barge 90 hp mercury
Answer:	There are 2 pcs jacks.
Question:	Does it work on a regular key switch or do I have to buy special kill switch
Answer:	Yes but tbey are not made for it. The top is flat and might slip jacking up a car.
Question:	Will this work on my Mariner 15h 2: stroke
Answer:	I’m not sure if it will fit , but the 2020 Thor comes with auto leveling system anyways .
Question:	How long is the lanyard
Answer:	As shown, angled support bars are yellow. All else is black

• ►Practical: Use the Bonnlo Universal Boat Carrier to cart your kayak, canoe, paddleboard, float mat, or jon boat
• ►Durable: Has a 150-pound weight limit, constructed from high-strength anodized steel to ensure longevity while also keeping the carrying
• ►Airless tires: No chemical smell, large NO-FLAT airless tires (10"D x 3"W) won't go flat under the heaviest of loads, will roll smoothly across sand and gravel
• ►Easy assembly and disassembly: Trolley is easy to assemble with no tools required, dolly breaks down for easy and convenient storage or transport
• ►More accessories: It will come with two 7.75 FT ratchet strap, you can secure full size kayak /canoe and yet store and transport the cart without any trouble

User questions & answers

Question:	Can it hold a tandem kqayak
Answer:	Lippert (LCI) has a great web site that you can find part number then do a search to find best price. Mine went bad in 2 yrs. Did as explained, cost (I believe) was $125.
Question:	What is the shipping company used to deliver
Answer:	It came with the system, but quicker to just go the control panel.
Question:	Can I return it if it doesn't work out
Answer:	Most scissor jacks are 3/4 inch socket.
Question:	What's the difference between the U shape and the other shape? I looking to tug a quite wide (36" at mid), 14.5' Necky tri-seat at about 75 lbs
Answer:	They are 5 inches high when fully collapsed. At least 24 when open. Not sure I don't open them all the way on my trailer. They are nice heavy duty jacks easy to put on and good price.

Product features

About Universal Canoe and Kayak Transport Cart Dolly

Featutes of the Bonnlo Airless Tires Cart rolls effortlessly while fully loaded with a kayak ,canoe or paddle board from your home or the parking lot to the river, lake, ocean. Convenient to carry by folding it and store the wheels and the rest in your kayak hull or strap it on the back with a bungee cord. Airless 10" Tires 165 lbs weight capacity. Rubber bumpers of the foot protect the frame from wearing. Total 4 foam bumpers on the arms to protect your canoe and kayak hull.

Convenient to carry

The carrier folds down for simple storage and transport.The tires can be quickly removed with the removal of lynch pin and can be conveniently stored in a large backpack or right in the kayak with you while out exploring on the water

You can fold the kayak trolley and store the wheels and the rest in your kayak hull or strap it on the back with a bungee cord.

Sturdy in transport

It has two 12 Ft spare Tie-down strap which are long enough and of good quality, you can secure full size kayak /canoe and yet store and transport the cart without any trouble

It is easy to assemble the wheels. Slide the wheels onto the axles then secure the wheel using the included pins.

Thoughtful in design

Solid aluminum frame; foam bumpers on each arm to protect your Canoe / Kayak hull. Sturdy 2mm aluminum pipe kickstand allows easy loading the maximum weight capacity of the Leader Accessories is 165 lbs.

Product description

Lung-powered horn delivers 110 decibels. No CO2, Freon, or batteries required. Designed for personal protection and safety on land and on water. Meets U.S. Coast Guard Rule 33 (Annex III) and Federal/EPA regulations.

• Uses lung power to produce a signal
• Intended to assist in personal protection and safety on land and on water
• Does not use CO2, Freon, or batteries
• Meets USCG Rule 33 (Annex III), and EPA regulations
• Durable red plastic construction
• 8 inches H x 3 ½ inches W
• Has a molded-in loop to which a lanyard can be attached

User questions & answers

Question:	I just received this horn with no directions and for the life of me no matter how hard I blow into the small tube no sound comes out the big horn
Answer:	Sounds like either the diaphragm is missing or punctuated. Pop the bottom off and put a piece of plastic wrap in there stretched across like a drum. You don't need to blow hard at all.
Question:	How far is the sound produced audible for
Answer:	Can't really tell how far the sound travels, but I can say with certainty that it is loud enough that I need to tell everyone on the boat to cover their ears. We use it when sailing out of our slip, and everyone moored near us turns to look at us when we blow it. It is pretty impressive.
Question:	How deep is this sound on this horn
Answer:	It is not particularly deep, but it is LOUD...
Question:	Can my cat use this horn? I have lost most of my hearing and never know when my cat needs to go outside
Answer:	My cat has one of these and she uses it to inform me when she is hungry. Works great!

Product description

Don’t spill a drop, no matter what the weather is like. Gimbal design swivels in any direction to keep your mug stable. Front cut out for mug handles; included foam insulation protects hot or cold beverages. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

• Chrome-plated steel wire stands up to the harshest conditions
• Cut-out area in front accommodates mug handles of all sizes
• Gimbal design allows holder to swing in any direction and remain stable
• Ideal for boats, RV’s, and cars
• Attwood products are both compatible and reliable, engineered and built with a never-fail attitude

User questions & answers

Question:	How do you get a mug with a handle in there if the opening in the wire for the handle is towards the inside and the handle would hit the back bracket
Answer:	Yes. The expiration date will be on the bottle.
Question:	What is the diameter of container opening
Answer:	Good day, thank you for your question. The full length of the jack, top to bottom when retracted is 31.93" and is approximately 2.25".
Question:	Can the mounting hinge be flipped over so it can mounted to a flat surface instead of hanging? Looking to install it on a riding mower console
Answer:	My 5ver. is 38’ and weighs 16k loaded. I installed the 3.0 system 3yrs. ago, works great. I remember a axle distance from frt landing gear being a requirement. (Recall 24’) FYI- cuts setup time in half, just don’t expect it to side to side level over three inches, front to back, no problem.
Question:	Will it fit a red solo cup
Answer:	I had to modify the rear brackets to fit my frame. If you already have the mounting brackets I don’t know if the patter is the same. The front landing gears were a direct replacement

Product description

This Attwood Heavy-Duty Rod Holder Extension lets you adjust the position of a rod holder by up to 6 inches. This durable black Rod Holder Extension is intended for use with all Attwood mounts, including the Combo Mount and Standard Side Mounts. This product is only compatible with Attwood rod holders. It comes complete with all necessary hardware to mount to a round or square 7/8-inch to 1 1/4-inch-diameter rail. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing of the highest quality marine products for over 100 years. We deliver safe and reliable lighting, fuel systems, water systems, seating & pedestals, swim ladders, custom upholstery, and general marine accessories that are easy to install and meet regulatory compliance.

• Innovative fishing technology engineered to provide industry leading features and performance without ever getting in the way of what truly matters: your next catch.
• Durable extension intended for use with all Attwood mounts
• Can be used with Combo Mount, Attwood Standard Side Mounts, and other leading rod holder mounts
• Comes complete with all necessary hardware
• Mounts to round or square 7/8-inch to 1 1/4-inch-diameter rail
• Black

User questions & answers

Question:	Will this work on a pro crappie rod holder
Answer:	I'm sorry I don't have a ruler handy, but I want to say about 18" wide... plenty wide for our extra large cable box receiver and the blue ray player. I would suspect any standard sized electronic component will fit just fine.
Question:	will this fit a cannon rod holder
Answer:	Not sure, but it's a decent sunscreen.
Question:	Will these work with Wise rod holders
Answer:	Antioxidants help reverse the damage that has been done. Sunscreens help prevent future damage from UV rays.
Question:	Will the Attwood Rod Holder Extention fit in a side mount Fish-on Rod Holder
Answer:	This formula is reef safe. It's a chemical sunscreen but it doesn't contain oxybenzone or octinoxate which deteriorates reefs. If you're looking for a 100% reef safe sun protection then you might want to consider mineral sunscreens.

Product description

This Attwood Low-Back Padded Boat Seat provides comfortable boat seating and is durable enough to withstand the rigors of a marine environment over the long run. This gray seat features a high-impact plastic frame and aluminum hinges. It is UV- and mildew-resistant with easy-to-clean vinyl and a standard seat hole-mounting pattern. The seat measures 7 inches W x 16 inches D x 16 inches H. It meets ABYC Code B standards. Attwood Corporation has been an award-winning leader in engineering, testing, and manufacturing of the highest quality marine products for over 100 years.

• Provides comfortable boat seating
• Durable seat can withstand the long-term rigors of a marine environment
• Gray seat features a high-impact plastic frame and aluminum hinges
• Seat is UV- and mildew-resistant with easy-to-clean vinyl and a standard seat hole-mounting pattern
• Measures 7 inches W x 16 inches D x 16 inches H
• Meets ABYC Code B standards

User questions & answers

Question:	Do you have to have the pedestal or can it be mounted on just a swivel
Answer:	The legs are painted wood The top & bottom shelf I think might be laminate. The top is a barn yard wood look not real barnyard wood. It is put together with screws & anchor bolts its easy to assemble I hope this helps I like it
Question:	Will this fit into the attwood 15700 clamp on seat mount and does it require any additional hardware to mount it
Answer:	The cabinets with the doors look to be around 12x11. But the shelves in the middle (without the doors) are adjustable, so you could store them there.
Question:	Does this fit a standard 5inch x 5inch mount
Answer:	The shelves are adjustable. You can move them up or down
Question:	Do you have white
Answer:	The whole cabinet including the doors are made of the same material. It's very hard compressed wood. It's pretty good quality. It doesn't break easily and it"s very nice to look. You can use it with or without the doors. The cabinet looks good that without the doors too

Product description

The Attwood 5009-4 Heavy Duty Adjustable Rod Holder features a new ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. Another feature is 180-degree vertical adjustment range for a variety of rod tip height settings. This rod holder can be used with casting rods and spinning rods, and includes a combo mount. For more than 100-years Attwood has been proud to serve the parts and accessory needs of the marine industry. We have partnered with you to design, manufacture, test, and distribute a complete line of products that have been a part of your tradition.

• New ergonomic design and easy to find rapid release latch mechanism
• Large, easy-grip lock-nut offers easy adjustment
• 180-degree vertical adjustment range for a variety of rod tip height settings
• Can be used with casting rods and spinning rods
• Includes a combo mount

User questions & answers

Question:	I just received it, but no instructions. It says double locking, but it just has a ring that rotates 90 degrees with no lock or stops
Answer:	It will not fit GoPro accessories. It looks the same but is a much larger style mount.
Question:	I have read a couple reviews that the rod holder breaks at the base have anyone else had same issue ? And if so what is a good fix for this problem
Answer:	It is square & each side is 35 1/2 inches
Question:	Does the mounting allow for mounting in square rails like on a pontoon boat
Answer:	No, and it is light weight.
Question:	Can these be mounted on a vertical surface? And what are the mounting hole dimensions? I am trying to replace 2 that were broken
Answer:	It can be transported in your car if it fits in my 2 door Honda Accord it should fit in your Jetta