12 best chargers battery chargers

Product description

Charge or jump start your SUV, truck, or large battery with the Schumacher SC1281 6/12V Fully Automatic Battery Charger and 30/100A Engine Starter. Contains battery and alternator tester which provides charge level and helps diagnose electrical problems. Features 30A for quick energy boost and 100A to jump start your car right away. Microprocessor controlled, multi-stage charging adds precision, safety and battery life. Built-in reverse hook-up protection prevents charger from operating if clamps are reversed. LED indicators and Start/Stop push button interface improves accuracy and ease of use. Features auto voltage detection to easily detect 6 or 12V batteries. Meets the highest industry standards with its Schu Eco Energy. DOE compliant. Compatible with standard, AGM, gel, and deep-cycle batteries.

• Features 30A quick boost and 1H2:L1600A jump start, powerful enough to start SUVs, trucks and large batteries
• Battery and alternator tester provides charge level and helps diagnose electrical problems
• Features multi-stage charging and auto-voltage detection for added precision, safety and battery life
• Reverse hook-up protection ensures charger will not operate if clamps are reversed
• Charges compatible battery types, including standard, AGM, gel and deep-cycle batteries

User questions & answers

Question:	Does this charger have a desulfation mode on it
Answer:	The manual talks about a desulfation mode existing, but does not say how to trigger it, or whether it is part of the automatic charging system. https://www.batterychargers.com/sites/default/files/manuals/0099001912E-R3.pdf page 8.
Question:	What does the 2/6 mean? Is this the trickle or battery maintenance mode info
Answer:	Starts at a moderate 6 amp charge reducing to 3 amps as charging nears completion.
Question:	Is it portable
Answer:	Light and portable, but needs a 120volt outlet, or a long(100' extension cord) to far distances.
Question:	Is this a 4 stage charger (bulk, absorption, float, equalization
Answer:	The SC1281 does, Bulk, absorption, equalization, desulfation and maintenance features

Product description

The Optima Chargers Digital 1200 Battery Charger enhances the performance of 12V AGM and flooded OPTIMA batteries as well as other high-performance AGM batteries, recovers deeply discharged batteries and helps extend battery life. With an easy-to-read, bright, backlit LCD gauge that displays battery charging, fill rate, mode settings and fault messages, this charger offers one of the best user interfaces.  It is microprocessor controlled and features high-efficiency 12-amp changing that outperforms conventional chargers. Additioanlly it features a battery maintainer port and cable for maintaining the battery in stored vehicles.

• Charges batteries other chargers cannot , down to 1.25V; Car audio/video applications exceeding 250 watts over the OE system
• Integrated (+) charging clamp LED work light with nonslip grips
• Charges, conditions and maintains 12V AGM and flooded batteries
• LCD battery charging gauge and quick-set selections for easy operation
• USB charging port compatible with smartphones, cameras and tablets
• Charges 12V batteries other chargers cannot
• Charges faster than competitive chargers with up to two times the output

User questions & answers

Question:	This optima charger how long is the warranty, thanks
Answer:	We provide 18-Month Hassle-Free Warranty, 24-hour friendly customer service and 100% customer satisfaction.
Question:	Are the battery terminal clips/clamps plastic
Answer:	Yes. This smart battery charger supports charging all types of 12V lead-acid battery, including AGM, GEL and STD. After searching the optima yellow top battery on market, most of optima yellow top batteries are AGM, which can be charged by this smart battery charger.
Question:	Does it work with Optima battery only or work with all brands
Answer:	There is a difference between a dead battery and a drained battery. A completely dead battery is not safe to charge. I believe this device needs a battery with at least 6 volts to recognize it as a battery and begin to charge it.
Question:	Are the clamps made of plastic or are they built of some other material that will actually last
Answer:	On my 2013 Jetta I had to turn the cables sideways on the post to get a better connection. If this does not work, it is because the battery is bad.

Product features

DIGITAL 1200

The OPTIMA Chargers Digital 1200 Battery Charger enhances the performance of 12V AGM and flooded OPTIMA Batteries as well as other high-performance AGM batteries. It also recovers deeply discharged batteries and helps extend battery life. With an easy-to-read, bright, backlit LCD gauge that displays battery-charging, fill rate, mode settings and fault messages, this charger offers one of the best user interfaces.

OPTIMA Digital 400 Features

• Maximize battery life and performance with OPTIMA Batteries’ built-in battery health mode
• Hybrid LED battery-charging gauge with LCD display
• Hook it and tilt it with the dual-purpose stand design or hang it with included wall organizer bracket
• 4 amp max

Benefits of Optima Chargers

• Microprocessor-controlled charging. Intelligent and efficient technology charges batteries faster
• Advanced safety features including no spark, reverse polarity, diagnosis of several battery faults and failures to prevent overcharging
• Fully automatic, multi-stage performance charging, conditioning, maintaining and storage reconditioning mode
• Recovers deeply discharged batteries and extends battery life and maintains battery performance by inhibiting and breaking up sulfation in your battery

OPTIMA Digital 1200 Features

• Enhances the performance of OPTIMA and other AGM batteries
• Charges, conditions and maintains 12V AGM and flooded batteries
• Recovers deeply discharged batteries and extends battery life
• USB charging port
• 12 amp max

Product description

Charge and maintain your automotive and marine batteries with the Schumacher SC1280 6/12V Rapid Battery Charger and 15A Maintainer. Digital display for voltage and percentage of charge, Start/Stop interface, and LED indicators and push button controls make this unit easy to use. Features auto voltage detection to easily detect between 6 and 12V batteries. Automatically selects charge rate for charging and maintaining. Built-in reverse hook-up protection prevents charger from operating if clamps are reversed. Meets the highest industry standards with its Schu Eco Energy. DOE compliant. Compatible with standard, AGM, gel, and deep-cycle batteries. Rated for 800 CCA.

• Features 15A to charge and 3A to maintain your battery
• Auto voltage detection automatically detects 6 or 12V batteries
• Automatically selects charge rate for charging and maintaining
• Reverse hook-up protection ensures charger will not operate if clamps are reversed
• Charges compatible battery types, including standard, AGM, gel and deep-cycle batteries

User questions & answers

Question:	What is the difference between the sc1280, sc1281, sc1323 and sc
Answer:	The length of warranty on paper doesn’t matter because getting them to act on it is difficult. They wanted me to send the charger to them at my cost and wait without a charger for 6?weeks
Question:	Can this be used to charge lawn tractor batteries
Answer:	Yes, they are plastic. And Yes the break. My negative terminal just snapped in half... Not happy. Why couldn’t they just use metal??
Question:	What is the warranty on this product
Answer:	It will work with any brand of battery.
Question:	Want to charge battery in vehical (suv). is it safe to do in enclosed garage? thinking yes, but please confirm
Answer:	The clamps are metal on the inside (obviously), and a durable plastic on the outside as insulating covers. Looks to be pretty durable, I've had no problems with them. But then, I tend to take care of my toys! :-) This unit, by the way, was an excellent investment...after having owned several less-capable chargers. This one restored my Yellow Top battery back to its full capacity in short order! I own a Tahoe Hybrid and had installed the Yellow Top as a result of standard batteries not holding a full charge after a year or two, and often draining when not running the Tahoe at least once every 4-5 days or so. Can connect full-time to the battery the accompanying cable, making the use of clamps unnecessary! Just have to remember to unplug it!

• Advanced fire-proof material has been apdoted to this EBL C808 charger - freely working for 2/4/6/8 AA/AAA Ni-MH/Ni-Cd rechargeable batteries.
• Globally charger with smart LED to show its charging progress, when LED lighting green means the battery is fully charged.
• Controlled by MCU, automatically stop charging when detecting improper input voltage, defective or short circuit or non rechargeable batteries.
• Using -∆V intellectual cut-off charging method, automatically turn to trickle charge, prevent the batteries from over-voltage, over-current or over-heat.
• Constant current charging would protect the batteries against current fluctuation and keep using the charger safely.

User questions & answers

Question:	My 4 batteries were losing charge so I put them in the charger. The lights are green. Do they have to be completely dead for them to recharge
Answer:	If your batteries are a few years old (or have been over-charged routinely), they may have developed high internal resistance. When used in a photoflash unit, for example, they will give very slow refresh time since the terminal voltage is lower under load. But when you put them in a charger, the terminal voltage becomes higher due to charging current. So the EBL charger (which is not very smart) considers those batteries as fully charged, even through they are not.You should get some better quality rechargeable batteries (such as Panasonic eneloop) to use in your photoflash unit.
Question:	Can you charge different mAh batteries at a time? Lets say I have four 2000mAH and four 2300mAH batteries, do I have to charge these separately
Answer:	I would think they can be charged together. The mAh value simply is an indication of the length of time the battery will operate. It has nothing to do with out put current or voltage. The 2300 may take a bit longer to charge than the 2000, but I cannot say for sure that would be the case. I would put the 2000's together and the 2300's together. Don't put one size next to the other size.
Question:	How long does it take to fully charge batteries
Answer:	Charge time is determined by the capacity of the batteries divided by charging current. The charging current of EBL 808A is very low at 200mA. So to recharge a pair of 2800mAh batteries at 200mA will take at least 14 hours.
Question:	can it charge uneven amount of batteries (1, 3, 5...)? Can you recommend any charger to charge 3 batteries? AA or AAA
Answer:	This charger can only charge in pairs, but we do have some other chargers that can charge uneven amount of batteries, here are the links: 1. http://www.amazon.com/gp/product/B00KBQ7U102. http://www.amazon.com/EBL-Battery-Rechargeable-Batteries-Released/dp/B00OT7HSBO3. http://www.amazon.com/EBL%C2%AE-Universal-Discharger-Rechargeable-Batteries/dp/B00IHT2AUE/ref=sr_1_11?s=hpc&ie=UTF8&qid=1399165294&sr=1-11&keywordsYou can choose your favorite ,may it help you!

Product features

EBL C808 Model (Latest Version) Battery Charger - Upgraded

Compatible:

Can both charge AA and AAA Ni-MH Ni-Cd rechargeable batteries(Do not charge alkaline or Lithium batteries)



How many batteries can be charged at a time:

2/4/6/8 AA or AAA batteries together at a time, need to charge batteries in pairs, do not charge uneven amount of batteries

4 LEDs show the status of charging, never charge 1 AA + 1 AAA together at 2 slots which are controlled by 1 LED

Reasonable Circuit Layout - Worldwide Usage

Patent Trickle Charge Mode

Details Shows Professional

Better Heat Dissipation

Heat dissipation design help the EBL 808 battery charger has a better function: overheat-detection to prevent over-charging.

Product description

This Black and Decker Battery Maintainer and Trickle Charger will work with both 6-volt and 12-volt batteries. It is ideal for battery maintenance, charging RVs, specialty vehicles, antique and classic cars, motorcycles, lawn mowers, tractors, ATVs, snowmobiles, personal watercraft and more. There are two LED indicators—a red one for fault and a green one to show charge status.

• Charges and maintains 12 volt and 6 volt AGM, GEL and WET batteries
• Easy connection to vehicle battery using battery clips and O-ring terminals
• Stops charging automatically when battery is fully charged or topped off, switching to float mode monitoring
• Built-in circuit protection guards against overcharging, reverse polarity, or short circuit; ETL certified for performance and safety
• Mounting bracket built-in to charger for convenient placement
• AC Low voltage compensation ensures maximum performance when used with an extension cord

User questions & answers

Question:	How long are the cords
Answer:	There are only two ways to Efficiently & properly charge the unit, plug it into a house 110 V outlet or Or I use a 4000 W inverter in my truck and I plug the inverter primary into the cigarette lighter and the secondary is 110 V which works great on that Max in addition to charging at the same time many charging tool batteries and led work lights. I leave it plugged in My trucks Invertor all the time while driving and all my tools including the max are always charged and hot ready to go.
Question:	Just want to make sure I understand this correctly - you can plug this into the cigarette lighter and don't need to connect to the battery
Answer:	I wouldn't count on this type of pack for anything with a motor (power tools, the blender, pumps, etc). I tried running a small fridge off a 400 watt inverter connected to a car battery and that wouldn't work. The fridge only needed ~120 watts running, but to start it's motor the "Surge draw" was ~1000 watts that would put the inverter in "overload" alarm every time. So despite the minimal time of running the blender, that "surge draw" is quite often too much for these small inverters.Also FYI, the batteries in these can give you ~200 watts of power for 1 hour (or 100 watts for 2 hours, etc). That's how long they'll last alone. I've seen in manuals that "You can extend the run time by connecting up another battery via the jumper cables", yet if you need multiple parts anyway I'd be tempted to look at a separate battery big enough for everything and a bigger inverter.One of the best suggestions I can make is get something like the "kill-a-watt" meter and see what power your blender & things need for how long. That meter costs $20, so before spending $100+ on this I think knowing what you really need (measuring the power demands) is worth it. That meter can show you both power draw while running (for inverter sizing) and KWH power use (for battery sizing).
Question:	how fast does it charge
Answer:	I don't have a CPAP or such, but have seen this question posted many times (look under the similar units like Schumacher XP2260 or Duracell 600 packs). This like those other packs has about an "18 amp-hour" battery hinting it can provide 1 amp (at 12V) for 18 hours, or 2 amps for 9 hours, or 3 amps for 6 hours, etc. Many others have said they can get at least 1 night out of the packs if you don't need to run things like a humidifier function or such that needs much more power. Since I don't have the same equipment you do to really know the power use (as well as what settings you need), one of the best ways to find out how long this would last is to get a meter like the "Kill-a-watt" and measure the power use yourself. That meter goes for under $20, so before spending $100+ on this I'd see that as worth it. Based on the info I gave above these packs can provide about 200 watts for 1 hour (or 0.2 KWH). With some of the labels like "400 watt inverter" or such you may think it lasts much longer (like at least 1 hour under that 400 watt load), but it doesn't, so don't expect too much out of it (and that's the same for all packs like this).
Question:	What is the float voltage? When the charger indicates it is done charging what is the voltage of the battery
Answer:	Yes, you can charge this with many "12V" solar panels that are out there. Just beware that if a solar panels is directly connected up, they can raise the battery voltage to levels over 15V which is considered "Overcharging". So it's best to have a voltage regulator or "Charge controller" between the panel and battery (which will stop charging once the battery is at 14.5V which is "full" for it).

• Fast, Smart Battery Charger: The Battery Charger can charge all types of 12V Lead-acid Batteries, including GEL, AGM and STD. It is perfect for charging Automotive, Motorcycle, Marine, RV, PowerSport, Lawn & Garden, etc. Do not charge a frozen or dead battery that has gone below 3V.
• 7-Step Charging Program: Desulphation, Soft Start, Bulk Charge, Absorption, Battery Test, Recondition and Floating. This allows for optimization of battery power, without overcharging or damaging.
• Advanced Start Aid: Engine Start Aid feature can help start your vehicle in about 120 seconds.
• Auto Detect Systems: Features Battery Voltage detection, then automatically selects charge rate for charging and maintaining. Battery reconditioning feature helps extend battery life. LCD screen displays charging status and battery status with easy to understand icons.
• Safety Protection: Battery Charger has Over Voltage, Over Heat, Overtime Charging, Short Circuit, and Reverse Polarity Protection to ensure users safety.

Product features

TowerTop Smart Battery Charger/Maintainer

• Charges 12 Volt Lead Acid batteries including Standard, AGM, GEL, and Sealed Lead Acid.
• LCD screen displays charging status and battery status with easy to understand icons.
• Start Aid function can optimize the power of your battery in only 120 Second, giving you enough power to start most cars.
• Warning:
• For 12V battery only, not to be used with 24V battery.
• Do not charge a frozen or dead battery that has gone below 3V.

7-STAGE CHARGING AND MAINTENANCE MODES

1. Desulphation: Pulse charges the battery to break down the build-up of lead sulphate crystals. Lead sulphate crystals can occur when a battery has been discharged or left unused for a period of time, seriously affecting the performance and lifespan of the battery.

2. Soft Start: A slow steady buildup of the charging process that limits the power supplied to protect the battery.

3. Bulk Charge: The main part of the charging process where 80% of the charge is applied.

4. Absorption: Fully charges the battery by slowly reducing the charge rate to allow the battery to absorb more power.

5. Battery Test: An automatic test to determine the battery condition after charging. If further charging is required, the Recondition stage is selected. If fully charged, the battery goes into Float status.

6. Recondition: Unique charge state to recover deeply discharged batteries.

7. Float: Maintains the battery at 100% charge without overcharging or damaging the battery, allowing the Smart Charger to be left connected to the battery indefinitely.

How the charger protects you and your battery?

TowerTop Battery Charger Stringently lab-tested in UL (Underwriters Laboratories) certified testing facilities. The Charger has UL/FCC certification.

Battery charger/maintainer has multifunctional Safety technology including short circuit protection, spark-free system, reverse polarity protection, overcharge protection,over-voltage protection, temperature protection, making it totally safe for anyone to use.

This allows you to safely maintain and extend the battery life of your lead-acid batteries while allowing your vehicles/equipment to operate more efficiently and stably.

Charging time(T)= battery capacity(Ah) / charging current(A)

Excellent ABS Shell

• Hard, excellent impact resistance
• Good flame retardancy
• Corrosion resistance
• Good electrical insulation
• Widely used in automotive, electronic communications, construction, etc.

Unique Storage Cables Design

• It easily solves your troubles with storing cables.
• After use, you can quickly store your cables.
• No more wasting your time.

What is the size of the charger?

• Item Weight: 5.25 pounds
• Power plug cable length: 6FT
• Battery clip cable length: 6FT
• Charger Dimensions: 10.1 x 6.9 x 4.7 inches

All-Inclusive Battery Clip

• Insulated all-inclusive chuck, no need to worry about leakage
• Bold inner core, stable current, no damage to battery
• Large bite force, not fall off

Fully Automatic System

With Smart Detect System, Automatic current selection, Automatic Identify Low Voltage, Automatic Stop After Full-charged.

Smart Cooling Fan

Smart fan with fan controlled function. In the normal charging process, when the charger is in constant current and constant voltage state (when the current is greater than 3.5A or the temperature is greater than 122℉), the fan works normally.

Lightweight & Portable Design

Ergonomic design, the flexible handle makes the charger more portable. It’s a great addition to your tools for your car.

Product description

The compact Ryobi P118-B battery charger will charge all ONE+ 18V batteries in 60 minutes or less, whether they have a NiCd or Li-Ion composition. This battery charger protects battery cells and conserves energy, thus maximizing battery life. The diagnostic system provides the charging status and informs the user if the battery is getting too hot or too cold to charge. Compatible Ryobi battery models include P102, P103, P104, P105, P107, P108, P197 (sold separately). This battery charger requires 120V 60hz input power and has a 2-prong North American plug.

• Charges all ONE+ 18V batteries in an hour or less
• Protective circuitry prolongs battery life and saves energy
• Compatible with 18V batteries such as P102, P103, P104, P105, P107, P108, P197 (sold separately).

User questions & answers

Question:	Can this be mounted like the larger ones
Answer:	I went to batterychargers.com home page for Schumacher. They describe all their models there. Look under battery chargers, not pro series.
Question:	My p113 oem charger has standing red top light, and fainter red bottom light (but not the green that indicates bad battery). do i have a bad charger
Answer:	Use the charger for charging only LEAD-ACID (STD, AGM, Gel or deep-cycle) rechargeable batteries.
Question:	I have just a flashing green light . What does that mean
Answer:	The SC1280 comes with a 2 year warranty
Question:	What does a solid red light indicate
Answer:	You can use this calculator to see how much hydrogen gas can be vented, and based on the size of the room, how much air you need to exchange per hour to keep hydrogen under 1% (the explosive range): https://www.sbsbattery.com/products-services/white-papers/material-handling/risks-of-unmonitored-hydrogen-in-battery-installations/battery-room-ventilation-calculator.html Note 12 volt car batteries have 6 cells, and you can get the amp hours off the label on the battery. Basically, vent the room and keep in mind hydrogen gas rises, so open the tops of windows to let it out, or better, your garage door. Or run an extension cord and do it outside. I am not a scintist, but I am an engineer.

Product description

Charge and maintain your automotive and marine batteries with the Schumacher SC1359 6/12V Fully Automatic Battery Charger and 15A Maintainer. Digital display and push button controls make this unit easy to use. Microprocessor controlled, multi-stage charging adds precision, safety and battery life. Features auto voltage detection to easily detect between 6 and 12V batteries. Built-in reverse hook-up protection prevents charger from operating if clamps are reversed. Meets the highest industry standards with its Schu Eco Energy. DOE compliant. Compatible with standard, AGM, gel, and deep-cycle batteries.

Specifications:

Battery Type	Standard
	AGM
	Deep-Cycle
Input Voltage	120V AC
Input Current	3.6A
Output Voltage	6/12V
Output Current	6V/2A, 12V/15A
Dimensions	3.63 × 10.5 × 7.75 in
Weight	3.59 lb
Safety Certifications	UL ULC

 

• Features 15A to charge and 3A to maintain your battery
• Microprocessor-controlled, with multi-stage charging for added precision, safety, and battery life
• Auto voltage detection automatically detects 6 or 12V batteries
• Reverse hook-up protection ensures charger will not operate if clamps are reversed
• Charges compatible battery types, including standard, AGM and deep-cycle batteries

User questions & answers

Question:	If my 12v auto battery is at less than 6 volts, this unit thinks it is a 6V battery and stops charging when it comes back up to 6 v. Any way to fix
Answer:	Not sure what you mean by mounted. It is lightweight and has no holes for screws.
Question:	What is the difference between this charger sc2359 and sca1500a
Answer:	A flashing green light means it’s charging. When the green light stays on it’s charred. Did you try a different battery in the charger to test if the green light indicator is working? I think you may have a bad charger.
Question:	do you have to charge the device before you use it to charge car battery
Answer:	The green light will flash when the battery is charging
Question:	How many watts does it take to power this unit? I will be powering the charger with a small generator which only puts out 700-800 watts
Answer:	It could be that the battery pack inserted is no compatible with the charger , is totally out of charge (if you leave it overnight it will get fix ) or is a defective battery.

Product description

The DEWALT DCB205CK 20V max 5.0Ah battery charger kit with bag allows you to keep your power tools charged and ready at all times. 20V max 5.0Ah XR battery allows for longer runtime and improved performance. The battery and charger are compatible with the entire line of DEWALT 20-Volt max tools and accessories. The charging unit charges all 12v-20v max batteries - 4 amp charge rate charger. This kit includes soft bag for additional tool storage. DCB205 comes with 3 year free service warranty. Kit includes: 1) 20V max 5.0Ah battery, 1) charger, 1) storage bag.

• 20V max 5.0Ah XR battery for longer runtime and improved performance
• Charges all 12v-20v max batteries - 4 amp charge rate charger
• Compatible with the entire line of DEWALT 20-volt max tools and Accessories
• Kit includes soft bag for additional tool storage
• DCB205 comes with 3 year free service warranty

User questions & answers

Question:	Where is this made
Answer:	A lot of newer chargers have this problem / feature. If voltage is that low there is a chance that the battery is dead and the charger does not want to put a high current into it and melt it. The best you can do is to use and old fashioned charger to bring the charge up to the low threshold for 12V charging. Some chargers require at least 10.5V before a microprocessor controlled battery will start charging it. What the the exact number of volts that would be the minimum...That I don't know.
Question:	Could the seller please confirm which charger is actually part of this package? picture showing dcb101 which is not the same as dcb115 charging rate
Answer:	The SC1359 passes the regulations for the department of energy - meaning it takes less power to operate then the SSC-1500A
Question:	Is this able to use dcb203 battery 20v,2.0A
Answer:	No. You hook it up to your car battery as directed, then plug it into an outlet. It runs on the electric power from your house. It doesnt store power like the lithium battery style charger/jumpstarters do. There are pros and cons to each type.
Question:	Is this a 5 battery charger or 5 batteries and a single charger
Answer:	Watts=Volts*Amps so 120v*3.6a=432w. You should be fine...

Product description

Charging time:

1-8 pcs 2100mAh AA recharger batteries:It takes about 10 hours to fully charge

1-8 pcs 1000mAh AAA recharger batteries: It takes about 4.8 hours to fully charge



Input:DC 5V 2A

Output:1.4V 250mA



Precautions:1. It is forbidden to charge the battery that is not rechargeable. 2. Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger 3. Keep the charger in an empty Place when charging



Package:1 x POWEROWL battery charger

1 x user manual

1 x Micro USB charging cable(No AC plug)

• POWEROWL smart charger passed US safety certification comes with chip control, when the battery is fully charged, it will automatically stop charging, and with LED indicator
• Scientific and reasonable battery charging position design, high quality materials effectively protect the battery from normal charging
• Charge any number of AA AAA rechargeable batteries to make your charging easier
• With a USB input interface, you can use a laptop, car charger, mobile phone charger, etc. to charge the battery
• AA AAA batteries charger uses trickle charge to extend battery life and charge up to 99%

User questions & answers

Question:	This charger input 220v
Answer:	This kit is manufactured in China.
Question:	Can you charge any brand
Answer:	DCB115 is what came in my package; which is a great charger.
Question:	Can this charger charge duracell and energizer rechargeable batteries or does it only charge powerall rechargeable batteries
Answer:	Yes, you may use any DEWALT 20V battery with this charger.
Question:	What does it mean that you shouldn’t charge pairs? Does it mean don’t charge just 2 at once? I thought you could charge any number of batteries
Answer:	It's 1 battery, 1 charger that charges only 1 battery, and a bag.

Product description

The BLACK+DECKER LCS1620B 12V/20V max* Lithium Ion battery charger offers you versatility. It charges all your 20V max* and 12V max* batteries so you can keep your tools powered No matter which they are. Green light indicator shows battery is charging and when it is fully charged red light indicator shows if battery is defective. Includes: 1) battery charger.

• Versatility and convenience
• Compatible with 12V max* and 20V max* Lithium Ion slide pack batteries
• Green light indicator shows battery is charging and when it is fully charged
• Included Components: LCS1620 battery charger

User questions & answers

Question:	Does this charger work for a bd power drill that uses 18v battery
Answer:	It doesn't run directly off 120 or 220. It runs off the 5 Volts from the USB output of a laptop or USB power adapter. So if your adapter is 220, it will be fine. So whether your adapter is 120 0r 220 both will be putting out only 5 volts through the USB output
Question:	What charger do i need for 2 in 1 stick vacum hsv320j
Answer:	I have charged Rayovac, and other commercial brand than I do not remember right now, no issues..... slower that other changers, but charging them better.
Question:	Does this charge a 20v max lithim ion lb2xr
Answer:	Yes. It worked for my other batteries. I had rayovac, energizer, and Duracell batteries. Some of them were defective so it didn’t charge all of them. But if they are good. The charger does work for other batteries.
Question:	will this work with black&decker lbxr20v max
Answer:	Hey im an electrical engineer and i figured i could help a bit! When they refer to the overcharging problem when charging multiple batteries this is due to having multiple batteries in series when charging ( which is also why some chargers require you to charge in pairs) if i were to guess they got around this by just setting up multiple charging circuits in parrallel. now you may ask why if you could do it in parallel would you do it in series? well essentially if you charge it with 2 in series it takes half the components 4 in series and your at a quarter. personally the actual components in these are probably like 50 cents with like a 3 dollar assembly cost and 50 cents injection case. so i really dont understand why anyone would do it in series. so yeah realistically this charger will work absolutely fine and you dont need to worry about charging multiple batteries.

Product features

Black+Decker LCS1620B 12V/20V Max Lithium Ion Battery Charger

This charger offers versatility. It charges all your 20V MAX and 12V MAX batteries so you can keep your tools powered no matter which they are.

Features:

- Compatible with 12V MAX and 20V MAX lithium ion slide pack batteries

Product description

Introducing the all-new GEN5X2, our most rugged, compact, and powerful, onboard marine battery charger we have ever made. The GEN5X2 is designed to charge and maintain up to two 12-volt lead-acid and lithium-ion batteries, including flooded, gel, AGM, and deep-cycle batteries. Each 12-volt battery bank provides up to 5-amps of pure charging power, plus doubles as a battery maintainer and battery desulfator. Included is a GEN5X2 10-Amp 2-Bank Waterproof Onboard Marine Battery Chargers (120-240VAC), Self-Tapping Mounting Screws, User Guide, 3-Year Warranty and certified to UL1236, ISO 8846, and 33 CFR 183.410.



Other commonly used search terms: marine charger, boat charger, marine battery charger, boat battery charger, onboard charger, onboard battery charger, onboard battery maintainer, onboard trickle charger, onboard marine battery charger, marine onboard battery charger, onboard boat battery charger, battery charger onboard, automatic onboard battery charger, fully automatic onboard battery charger, onboard battery charger 12v, onboard battery charger 12 volt, smart marine battery charger, 12v marine battery charger, 12 volt marine battery charger, battery charger for marine battery, boat battery trickle charger, boat onboard battery charger, deep cycle battery charger marine, fishing boat battery charger, bass boat battery charger, battery charger for boat, marine deep cycle battery charger, 12v marine charger, 12 volt marine charger, onboard battery charger maintainer, waterproof battery charger, onboard waterproof battery charger, onboard waterproof marine battery charger, onboard marine battery charger 2 bank, two bank onboard marine battery charger, onboard battery charger 2 bank, two bank onboard battery charger, marine onboard battery charger 2 bank, two bank battery charger marine, 2 bank marine battery charger, marine battery charger 2 bank, 2 bank battery charger for boat, boat battery charger 3 bank

• Multiple banks - A two-bank onboard battery charger rated a 10-amps - 5-amps per bank - for 12-volt batteries, including marine, boat, starter, and deep-cycle batteries.
• Charging modes - Independently charge and control each battery bank with selectable charging modes - including 12V, 12V AGM, 12V Lithium, and 12V Repair Mode - for all types of lead-acid and lithium-ion batteries.
• Enjoy precision charging - An integrated thermal sensor detects the ambient temperature and alters the charge to eliminate over-charging in hot climates and under-charging in cold climates.
• Charge dead batteries - Charges batteries as low as 1-volt. Or use the all-new force mode that allows you to take control and manually begin charging dead batteries down to zero volts.
• Redefined mounting - A simplified mounting system allows for quick and easy installations in any direction - even up-side-down - with an integrated anti-vibration backing to isolate shock, vibration, and noise.
• Designed for water - A fully-sealed and waterproof onboard battery charger with an ingress protection rating of IP68, but has survived brutal life cycle testing, including thousands of hours underwater.
• What's in the box - GEN5X2 10-amp 2-bank waterproof onboard marine battery chargers (120-240VAC) with a 72-Inch (182cm) DC cables with 3/8-inch (M10) eyelets and a 72-inch (182cm) Type-B AC cable, self-tapping mounting screws, user guide, and 3-year warranty.

User questions & answers

Question:	In rv i have a 12v battery for starting & another huge 12v, i assume for 12v rv appliances and lighting. can this be used to charge both at same time
Answer:	No, it is only compatible with 12V MAX* and 20V MAX* lithium ion slide pack batteries.
Question:	Does this battery stop charging automatically when the battery is fully charged
Answer:	good charger works great
Question:	Can this charger be used used to charge 2 batteries that are for 2 different machines
Answer:	I searched this and could not find a straight answer anywhere. I took a chance and bought this charger anyway. I have a LB2XR20 battery I bought from amazon and this charger worked perfect. Love it.
Question:	How many stages is this charger
Answer:	Yes, this will work.