14 best extreme max aluminum ramps

Product description

Are you looking for a product to help you load and unload your ATV?  Do you need something to extend the box on your pickup so it will safely hold your cargo?  If so the ATV Ramp Xtender is what you need. The box extender quickly turns into a set of heavy duty ramps that are 7.5 feet long and are rated up to 1,500 pounds.  They can also easily be used as a box extender that adds 2 feet to your truck box, providing additional cargo space for hauling while simultaneously adding to your fuel economy.

• More Space – Add 2’ of length to your truck bed to haul ATVs, lawn and garden equipment or other cargo
• More Applications - Fits all light and medium duty trucks, from long bed pickup to sport truck
• More Gas Mileage - RampXtender creates an open tailgate design to decrease wind drag and boost gas mileage
• More Uses -RampXtender can maximize cargo capacity on any load
• More Warranty - Limited Lifetime Warranty
• Fit type: Universal Fit

User questions & answers

Question:	how wide are the individual ramps
Answer:	Not sure. That may be a question for the manufacturer or other reviewers.
Question:	Would this fit a 2014 Tundra with a short bed
Answer:	Didn't look like that. Had steel shafts that fit in my drill. Sorry.
Question:	I have a lifted f350 on 36" tires - will this ramp be long enough
Answer:	I just bought a 3” buffer sander and it does great on my shoes for the final buffing I run a soft cloth over shoes first to get the worse amount of polish off then buff them
Question:	Can this be used with a golf cart in the bed of an F
Answer:	Yes, but I’d think you’d want something larger for that purpose. These are on the small side. I bought them to buff pens or bowls after I’ve turned them on the lathe.

Product features

RampXtender ATV Ramp Configuration

Position the RampXtender as an ATV ramp to easily load and unload your ATV into your truck bed! The tri-fold 7.5' ramp features an arched 12° design for smooth operation and boasts a 1500 lbs. weight capacity. Durable rungs provide excellent grip, preventing slipping and wheel spin.

RampXtender Tailgate Extender Configuration

Place the RampXtender into the Tailgate Extender configuration to add an additional 2' to the length of your truck bed! Easy to position, the RampXtender secured to the back of the bed via heavy-duty straps. The open-tailgate design decreases wind resistance, helping increase gas mileage.

RampXtender Convenience

The RampXtender is constructed from extruded 6063 aircraft aluminum, providing excellent strength in a lightweight design. Each ramp weights just 19 lbs. The RampXtender is designed to fit all light and medium-duty trucks, including long-bed trucks and sport trucks.

Also Available From Extreme Max:

Extreme Max 5500.4076 RampXtender Motorcycle Ramp and Tailgate Extender Combo

Love the design of the RampXtender ATV Ramp and Tailgate Extender, but need something more suited for your dirt bike? We've got it right here. The RampXtender Motorcycle Ramp and Tailgate Extender offers all the same great benefits, including the high-strength lightweight aluminum construction, 2' bed extension, arched 12° ramp design for smooth loading and unloading, and a 1500 lbs. weight capacity.

Product description

The RampXtender is the easiest way to load and transport a motorcycle in your pickup. This all-in-one ramp system functions as both heavy-duty motorcycle ramp and bed extender with a universal design to fit all consumer pickup trucks. It's the only ramp that gives you more, with welded, extruded 6063 aircraft aluminum construction, arched 12° design for easy loading and maximum clearance and an unbelievable limited lifetime warranty. The RampXtender will not fit Toyota Tacoma or 2019+ Ford F-150 models. Capacity: 1500 lbs. Ramp Weight: 19 lbs. Extended Ramp Length: 7.5'.

• More Space - Add 2' of length to your truck bed
• More Applications - Fits all light and medium duty trucks, from long bed pickup to sport truck
• More Gas Mileage - RampXtender creates an open tailgate design to decrease wind drag and boost gas mileage
• More Uses -RampXtender can maximize cargo capacity on any load
• More Warranty - Limited Lifetime Warranty

User questions & answers

Question:	Will this fit a Dodge 1500 bed
Answer:	Don’t know, contents not listed on individual bottles. But it works great!
Question:	to load a 4 wheeler...I need 2 of these
Answer:	Amazon usually has it in stock , so shouldn’t be long
Question:	wil it fit a 2018 toyota tacoma
Answer:	Works well on anything chrome or aluminum. Also does reasonably well on bare metals
Question:	Will this fit a 2003 tacoma
Answer:	I have been impressed with it used on both aluminum and chrome.

Product features

RampXtender ATV Ramp Configuration

Position the RampXtender as a motorcycle ramp to easily load and unload your bike into your truck bed! The tri-fold 7.5' ramp features an arched 12° design for smooth operation and boasts a 1500 lbs. weight capacity. Durable rungs provide excellent grip, preventing slipping and wheel spin.

RampXtender Tailgate Extender Configuration

Place the RampXtender into the Tailgate Extender configuration to add an additional 2' to the length of your truck bed! Easy to position, the RampXtender secured to the back of the bed via heavy-duty straps. The open-tailgate design decreases wind resistance, helping increase gas mileage.

RampXtender Convenience

The RampXtender is constructed from extruded 6063 aircraft aluminum, providing excellent strength in a lightweight design. Each ramp weights just 19 lbs. The RampXtender is designed to fit all light and medium-duty trucks, including long-bed trucks and sport trucks.

Also Available From Extreme Max:

Extreme Max 5500.4070 RampXtender ATV Ramp and Tailgate Extender Combo

Love the design of the RampXtender Motorcycle Ramp and Tailgate Extender, but need something better suited to your ATV? We've got it right here. The RampXtender ATV Ramp and Tailgate Extender offers all the same great benefits, including the high-strength lightweight aluminum construction, 2' bed extension, arched 12° ramp design for smooth loading and unloading, and a 1500 lbs. weight capacity.

Product description

Board a pontoon, dock or floating raft effortlessly with the Extreme Max Pontoon and Dock Ladder! Even in deep water, the angled design and extra-wide steps make boarding safe and comfortable. Designed to mount easily to pontoons, docks or floating rafts in less than 5 minutes. Use the same ladder for all three applications with the purchase of additional mounting hardware. The simple, secure mounting system makes relocating the ladder fast and easy, and allows convenient set-up and storage. Stainless steel mounting hardware included. Corrosion-resistant in freshwater applications; oxidation may occur in brackish and saltwater. Two-year replacement .

• 100% aluminum 4-step pontoon ladder
• Heavy-duty square tubing construction
• Step Interval: 11. 5" / Step Width: 15. 75" / Total Width: 17. 75"
• Weight Capacity: 300 lbs.
• Two-year replacement

User questions & answers

Question:	Will this ladder hold 285 lbs
Answer:	If it says red, then it's just red. search up the KM780 RGB if you want multi-color RGB lighting, but they're the exact same keyboard otherwise. On the RGB model as well you can change the color of each individual key with the help of the G.SKILL software and program different lighting modes like wave and ripple, which are pretty cool for me. The RGB model of the KM780 does cost like $50 more than the red backlight one though, so if you just want a sturdy metal casing keyboard that will last you a couple years, get the red backlight one. I own both personally, one for my main computer and another for my sibling that's barely getting into PC gaming.
Question:	How do I order additional mounting hardware
Answer:	Yeah
Question:	I received the boat ladder I ordered - the box is destroyed but it looks like most of the stuff is in it- not sure do
Answer:	The keyboard should work in BIOS. If it doesn't for you, try flipping the switch on top from "G" to "S". And make sure that the keyboard is plugged into the USB ports that are set to be detected by the motherboard on boot.
Question:	Is this ladder made of aluminum and does it come with installation bolts
Answer:	As others have said, the differences are in the feel and the sound. The reds are the most "fluid" and will likely be the most silent, whereas the blues are going to be the loudest and are the most "clicky." The browns are somewhere between the two. The way that most people choose is depending on what you plan to do with the keyboard. If you'll primarily be typing, then the blues are considered to offer the best experience. If you'll primarily be gaming, then the reds are considered superior. If you'd be doing a mixture of both, then the browns are the way to go. Those are opinions of general consensus rather than hard rules, but if you're feeling overwhelmed or confused then it's not a bad place to start. (For what it's worth, I primarily type and went with the brown switches, and love them. I've never tried the blue or red, but it doesn't matter: this feels way better to type on than a non-mechanical keyboard, for sure.)

Product features

Pontoon and Dock Ladder

This angled, heavy-duty aluminum ladder is designed to do anything. Whether you're planning to take it on your pontoon, put it at the end of the dock or use it on a swim raft.

The built-in angle makes boarding effortless, with extra-wide steps spaced 11.5" apart for solid footing. It's constructed of 1" aluminum tubing for unsurpassed strength and extra-light weight.

Never struggle getting out of the water again with a purchase of Extreme Max Pontoon and Dock ladders.

Relocate With Ease

One set of stainless steel mounting hardware is included. Use it to mount your ladder on a pontoon, swim raft, or dock. Purchase the Footman Relocation Kit (3005.3455) to use your ladder in other places. Simply install the Footman Relocation Kit wherever a ladder will be necessary. The next time you need to move your pontoon/dock ladder you will be ready to go with your pre-installed Footman Kit.

Mounting hardware installs in 5 minutes. Ladder attaches and detaches easily for use in multiple locations or easy storage and transport.

Extreme Max

Extreme Max is more than a brand.

It's a way of life. It's the expectation that your outdoor gear will withstand high speeds, low temperatures and deep powder; long days in the water and sun; or muddy rough-and-tumble terrain.

For every outdoor extreme, we have the equipment.

Extreme Max. Do more outdoors.

Product description

Extreme Max Heavy-Duty Roller Guide-Ons do more than help you get your boat on your trailer; they help prevent a multitude of loading problems. They'll help you load faster and safer, keep you from loading too deep, keep your trailer position true and are especially helpful at night. They will fit bunk or roller-style trailers up to 3" wide x 4. 25" tall . These heavy-duty guide-ons feature custom-formed 97° arms with a 13" roller assembly and up to 14" (3" trailer frame) or 16" (2" trailer frame) of horizontal adjustment. Extreme Max Guide-Ons are zinc-coated and intended for freshwater use only. Use in saltwater or brackish water will corrode and deteriorate the finish. 6" bolt kit available for trailer frames up to 5" tall (Extreme Max 3005. 4065).

• Includes one pair of Heavy-Duty Roller Guide-Ons with an easy, bolt-on installation that fits bunk or roller-style trailer frames up to 3" wide x 4. 25" tall
• Custom-formed 97° arms and 13" roller assembly; up to 14" (3" trailer frame) or 16" (2" trailer frame) of horizontal adjustment
• Zinc-coated for freshwater corrosion-resistance, not intended for use in saltwater or brackish water
• The size and shape of trailer frames can vary drastically, please measure your boat on the trailer before ordering to ensure a proper fit
• 6" bolt kits are available for trailer frames up to 5" tall, see Extreme Max 3005. 4065

User questions & answers

Question:	Can I get these in Black to match my trailer
Answer:	Yes,it is very cool.
Question:	What size is the square tube
Answer:	Yes,That's a cool toy for kids.
Question:	Do you have a guide that uses a 2"x2" square tube that the roller attaches to ? My trailer has a welded on bracket that supports 2"x2" sq tube
Answer:	It's been awhile since I put mine together but I believe one hooks to the battery and one hooks to the front which makes the headlight work
Question:	What angle is the bend in the tube
Answer:	I recommend a hardware store

Product features

Extreme Max Heavy-Duty Roller Guide-On System

The Extreme Max Heavy-Duty Roller Guide-On System provides a worthy assist while getting your boat on and off its trailer, helping you load and unload faster and safer. Attached to the trailer frame, the pair of guide-ons helps center the boat on the trailer, preventing wind and currents from derailing your loading attempts, while the uprights provide a sight line at deep launches and in murky waters. The rubber rollers provide a soft touch for your boat, while its steel construction withstands nearly anything you can throw at it.

Roller Guide-On System

The Extreme Max Heavy-Duty Roller Guide-On System provides 13" rollers that keep your boat lined up with your trailer. The rubber construction of the rollers helps prevent scratches and other damage to your boat's hull by providing a soft, forgiving surface when bumped against. The system is adjustable both width-wise and height-wise to offer a fit that best suits your boat.

Direct-to-Frame Mounting

The guide-ons attach directly to the frame of roller and bunk style trailers with no drilling or cutting required, making them easy to move or reposition if needed. The standard hardware kit is included, allowing mounting on trailer frames up to 3" wide x 4.25" tall. Additional hardware kits are available for larger-framed trailers if required.

See hardware kit 3005.4065 for trailer frames up to 5" tall.

Also Available from Extreme Max:

Extreme Max 3005.2181 Roller Guide-On System

Looking for something smaller? The standard roller guide-on system from Extreme Max includes one pair of rollers guide-ons perfectly sized for small aluminum boats, duck boats, jon boats, and other light craft while offering many of the same benefits of the Heavy-Duty Roller Guide-On System.

Product description

Board your pontoon easily and safely with the Extreme Max Undermount Pontoon Ladder. This welded aluminum ladder attaches to two pontoon stringers and stows under the front deck. Ladder is secured in the "stowed position" by a heavy-duty rubber strap. Deploy the ladder by unhooking the strap and sliding the ladder out and into the water. Wide, sturdy traction rungs make boarding comfortable for children or adults with 12" rung spacing. Boarding ladder area: 12.5" wide with 1.5" grooved rungs. Includes stainless steel mounting hardware and two-year limited warranty. * Note: For pontoons with underside sheeting or closed channels that do not allow access to the topside of the pontoon’s stringers, additional mounting hardware will be needed and is not included. Use marine-grade stainless steel self-tapping screws to fasten your ladder in place instead of the provided mounting hardware.

• Welded aluminum construction
• Convenient undermount design
• Four steps for comfortable boarding
• Mounting hardware included
• Two-year limited warranty

User questions & answers

Question:	how does ladder work with trailer??trailer raises to ribs of boat
Answer:	Apply masking tape over the door seals and inside the door jams that you don't want any overspray. After each layer, you also open the doors a little to keep from sealing in the doors.
Question:	How far does it hang down under the boat
Answer:	Haven’t used it yet. I know someone who used the black and no issues.
Question:	What is the manufacturer weight limit of this product
Answer:	White doesn’t cover nearly as well as standard black. You’ll want to order a few more bottles and using a thinner to get a smoother texture and better layup is a good idea. Do a search and you’ll find options. Hope that helps.
Question:	i have sea leg on the bottom of my pontoon boat well this ladder work under my boat, and what's the depth of the ladder when closed
Answer:	8 of these covered my crew cab short bed f350!

Product description

The strike Pack Eliminator Mod Pack adapter adds four Cutting edge, Hyper response, mappable rear buttons to your standard ps4 Controller. The ability to keep your thumbs on the sticks, and fingers on the triggers, greatly improves your response time in any game. Gain the competitive advantage you deserve and eliminate your enemy. Hundreds of Controller Mod combinations are built in and are digital so your Controller warranty is not voided.  Note: 3.5mm headset audio compatible with Controller model cuh-zct2u and later. Original model cuh-zct1u Controller not supported for 3.5mm headset audio - USB headset required.

• Four Hyper response Buttons
• Full mapping capability of all 17 functions
• Customizable digital mods
• High performance grip
• Patented Controller transferability

User questions & answers

Question:	Will this replace a scuf controller
Answer:	I haven't seen it. I have most of the IGT games on boxed sets for home. Maybe it's too new or it's a single download game like phantom efx does. The IGT game box game Miss Red has a slot called Whale Song and that's supposed to be similar to voodoo vixens. I'm guessing if it's similar then its probably a IGT game. Love their boxed sets and you don't have to use the CD each time you want to play! Good Luck....
Question:	Will it come with a paper telling me how to activate the mods and do I need any thing to activate the mods like a separate sold wire
Answer:	Yes, it runs with window 7 and I was able to do a full download from disc so you do not have to leave disc in....
Question:	soo... this will work on a regular ps4 controller and will work like a Scuf gamming controller? talking about the paddles
Answer:	I have only played it on my PC.
Question:	do you need a pc to map the buttons or can you do it straight threw the ps
Answer:	Without knowing your particular computer hardware or Operating System, this is a question that nobody can answer. The immediate thught that comes to mind is that maybe your system does not meet the minimum requirements for installation. The other possibility is a faulty download in which case you might try downloading it again (best on Firefox). Hope this helps. If not, please provide a better description of your system.

Product description

A spare tire carrier is the best way to insure that you're never the guy stuck by the side of the road on fishing opener. This model features durable steel construction with zinc plating for corrosion resistance, and a bolt-on design for easy installation (no cutting, no drilling) on trailer tongues up to 3" wide x 4" high. Fits 4 hole rims with 4" bolt circle patterns and 5 hole rims with 4. 5" bolt circles. Note: Does not fit 15" tires, or 6-lug rims. Not intended for applications where the trailer will be in contact with saltwater or brackish water. Two-year replacement .

• Heavy-duty, welded, reinforced zinc-plated steel construction
• Fits 4 hole rims with 4" bolt circle patterns and 5 hole rims with 4. 5" bolt circles
• Designed for front or mid-trailer mounting
• Easy-to-install bolt-on design - No cutting or drilling
• All mounting hardware included - Two-year replacement

User questions & answers

Question:	can I get 1/2-20 bolts for the tire mounting
Answer:	Yes
Question:	fit 5 on
Answer:	yes
Question:	Does this mount work for trailstar trailer hauling a pro 165 tracker boat? is tire at angle to clear boat? trailer
Answer:	Not angled but worked great on my Lowe Stryker 17 which I believe to be a similar set up.
Question:	How high does this lift the spare
Answer:	I haven't measured exactly but I put it on my boat trailer and it worked great the bottom of my 15" spare is just below trailer frame

Product features

Extreme Max Economy Spare Tire Carrier

Eventually (and probably at the most inopportune time) one of your trailer tires will go flat. Don't be stuck on the side of the road unable to make it to the cabin or your favorite fishing hole because you didn't bring your spare tire. We get it, there are a thousand reasons to leave the spare at home, and most of them involve it taking up valuable storage space. Well, that's where we come in. The Extreme Max Economy Spare Tire Carrier helps alleviate the hassles of carrying a spare. Mounting directly to your trailer frame, the carrier creates space where there once wasn't, providing an easy-access mount for nearly any 4 or 5-hole spare tire and allowing your to get back on the road with minimal hassle.

Direct-to-Frame Mounting

Easy installation is the name of the game. Fitting standard trailer frames and/or trailer tongues up to 3" wide and 4" tall, the Spare Tire Carrier mounts easily with just a couple wrenches and requires absolutely no drilling or cutting, making it easy to reposition or remove when necessary. All mounting hardware is included.

Easy Accessibility

While mounted, the spare tire sits vertically just outside the trailer frame, providing easy access in the event that it is needed while remaining out of the way of your boat or other cargo. The close-to-trailer design helps cuts down on wind resistance during travel.

Versatility

The Economy Spare Tire Carrier is designed to fit both 4 and 5-lug spare tires with its innovative mounting plate, each mounting with two lugs for a secure hold.

Note: The carrier is not designed for use with 15" wheels or 6-hole lug patterns.

Also Available from Extreme Max:

Extreme Max Standard 3001.0064 High-Mount Spare Tire Carrier

The High-Mount Spare Tire Carrier's offset design holds tires at an angle to fit all boat trailers. It holds tires up to 16" with 4, 5 and 6-hole bolt patterns with a lug distance between 4.5" and 5" on center. The included hardware kit fits both 3" and 4" trailer frames (5" trailer frames require Extreme Max hardware kit 3001.0077). Its heavy-duty steel construction is nickel plated to prevent corrosion and extend the units life.

Product description

The V-Slide dolly system is ideal for all snowmobiles and fits all ski widths. Our dollies come with "Easy Roll" casters for both the front and rear plates. These casters have oversized 3" wheels with two ply construction and a sintered steel center bushing. This makes the wheels both tough and easy to move. In side by side comparisons our V-Slide system reduced pushing effort by 50%. Our heavy-duty front plates have double lock straps to assure that the ski stays firmly attached on any surface or direction. The front plates measure approximately 8" long x 10" wide x 4" tall. The rear plate measures approximately 8" across x 4" tall.

• "two-ply 3"" rubber/nylon wheels"
• smooth-turning casters and sintered bushings
• "deep ""v"" design fits all snowmobile skis"
• oversized plates and wheels for extra stability
• two-year limited warranty

User questions & answers

Question:	I see the video shows buckle straps being used to secure the ski to the dolly but the pictures show velcro can anyone advise what is actually used
Answer:	They sell a tintable version that you can add whatever color you need.
Question:	Can you drive the snowmobile into the garage with the dollies attached to the skis
Answer:	Make sure you sure an adhesion promoter so it bonds.
Question:	Will this work on a gravel floor
Answer:	Just use standard reducer .
Question:	What is the max capacity in pounds these dollies can withstand? I'm considering buying two sets and using them as wheel dollies for a VW bug ~2500lb
Answer:	If you used a quality self etching primer thats made to go over chrome I think it would hold fine, i know the heat wouldn't affet it becuse Its been on my stacks for over a year and hasn't chipped at all, still looks as good as day 1.

Product description

The Extreme Max Trailer Step adds a sturdy stepping platform to your trailer, allowing easier access to anything you haul, including boats, cars and more! The step securely attaches to rectangular trailer tongues or frames 2" to 3. 5" wide and up to a 5” tall. The 5” x 9” stepping platform contains a no-slip rubber gripping pad to keep your feet where you put them. Easy to install, the step may remain on the trailer during travel as a permanent installation. The powder-coated steel construction boasts a 300 lbs. weight capacity. All mounting hardware included.

• Provides easy access to your trailered toys!
• Fits rectangular trailer tongues or frames 2" to 3. 5" wide and up to a 5” tall
• 5” x 9” platform features a no-slip rubber pad
• Powder-coated steel construction
• Weight Capacity: 300 lbs.

User questions & answers

Question:	Is the mounting hardware galvanized or nickle plated
Answer:	I would think so. I use it for brushing my car tires to clean them.
Question:	What is the height once it is mounted. From the bar to the top of the step
Answer:	I wouldn't recommend using it on rim's. In my opinion. I bought this for tires and a mothers wheel brush for trims. Just my 2 cent.
Question:	Where’s my order for
Answer:	Hi Laurel, Thank you for reaching out to us. I was able to get those dimensions for you. The brush is 5 inches long by 3 inches wide by 2 1/2 inches tall. I hope that information helps you. If you have any other questions, please do not hesitate to ask. Take Care, Katie
Question:	Is it aluminum or steel? Discription isnt clear. One says aluminum another says steel
Answer:	The bristles are soft. Can clean chrome hubcaps I also wash the tyres with this brush.

• Includes 3100 lb. Bear Claw winch, 45' steel cable, roller fairlead, snatch block, mounting hardware, battery cable, motor cable and connectors; Extreme Max Bear Claw 5600.3072 High Output 3100 lb. with 2800 lb. Footprint ATV/Utility Deluxe Winch Package
• 3600 lb. of pull in 3500 lb. footprint, with low amp draw, high efficiency and low noise
• Dynamic braking system and triple planetary gear box; sealed for water resistance
• 4-bolt mounting provides a universal fit for all brands of winch mounts
• 2-year replacement warranty

User questions & answers

Question:	Will this fit 2016 arctic cat 300? or what mounting bwill this fit 2016 arctic cat 300? or what mounting bracket i'll need for it
Answer:	It shouldn't work as this paint requires heat treating to cure it. Much more than fiberglass would withstand I'd imagine.
Question:	Will this fit a 2020 570 polaris sportsman without a mounting plate
Answer:	Sure,all balls can float in pool.
Question:	Will this mount to 05 660 grizzly atv. Do i need to oder anything else to mount it to the 4wheeler
Answer:	I don’t know what’s all in the material used. But it’s like a thin rubber. There nice balls
Question:	Can you put synthetic rope on this
Answer:	Actually,mine hoop is 7",these balls almost as big as my hoop ring,there max diameter is 6.3"

Product description

The center-lift design of the Extreme Max Wide Motorcycle Scissor Jack is perfect for most motorcycle maintenance needs. Equipped with an optional dolly tray for easier mobility, the jack lifts to an extended reach of 14-1/4” while the 15-1/8” x 9” platform holds your bike with a rubber padding that prevents scratching and adds stability. The jack is operated manually by using a 7/8” socket or wrench (sold separately). Measurements with dolly: Extended height: 14-1/4”; Collapsed height: 4-1/4”; Base: 15-1/2” x 16-1/2”; Lifting platform: 15-1/8” x 9”; Measurements without dolly: Extended height: 14”; Collapsed height: 3-3/8”; Base: 15-1/8” x 9”; Lifting platform: 15-1/8” x 9”. *Do not use an impact-style wrench to raise or lower the jack.

• Extends up to 14. 25" height
• Easily hand-operated using 7/8" socket or wrench (sold separately) - *Do not use an impact wrench or powered drill to operate the lift
• Durable rubber padding on platform
• Dolly tray provides easier mobility
• 1100 lbs. weight capacity; will not lift trikes

User questions & answers

Question:	Will this allow me to remove my rear wheel on a Honda Shadow Spirit
Answer:	Sorry, I did not purchase the dolly with the stand.
Question:	Will this work for a 2013 harley davidson road king
Answer:	Dear Customer, Thank you for your question. It is the 22mm diameter hexagon bolt. Please do not hesitate to contact us if you have any other questions. Best wishes, VIVOHOME Customer Care
Question:	Will this work for a 2008 Goldwing
Answer:	I just measured mine: 3 9/16". Get a buddy to lift the Harley just a tad and you should be able to get this under it. There's also a rubber no-slide pad on the bottom. You could maybe pull that off to gain a bit. Or put a bit more air in the tires.
Question:	Does it roll well? And is it stable when on the dolly? Looking to use it for storage and maintenance
Answer:	Dear Valued Customer, Thank you for asking. The maximum lift height is 14.5 Inch. For any other question or inquiry, please feel free to contact us via Amazon's direct messaging service We will provide you with a satisfaction-guaranteed solution within 24 hours. Best wishes, VIVOHOME Customer Care

Product features

Extreme Max Wide Motorcycle Scissor Jack with Dolly

When it's time to get your motorcycle's wheels off the ground for maintenance or cleaning, look no further than the Extreme Max Wide Motorcycle Scissor Jack! Specifically designed to be one of the strongest and most stable scissor jacks available, the high strength worm drive and heavy-duty steel construction pair together to lift nearly any road bike, touring bike, or cruiser up to 1,100 lbs. Included the jack is a durable dolly designed to fit the exact measurements of the jack's base, allowing an unprecedented mobility while positioning the jack underneath your motorcycle.

The lift is operated manually by using a wrench on the 7/8" worm drive. Do not use an impact wrench or powered drill to operate the lift.

Strength

When lifting your motorcycle, you want something strong, something you can rely on time and time again. That's why our engineers put in the effort to create a scissor jack with unparalleled strength and ease-of-use. Heavy-duty steel is the main component in the construction of the jack, preventing bending, breaking, and warping – keeping it consistent from it's first use through it's 100,000th use.

Stability

Stability shouldn't be a question when you're lifting anything, especially something as precious as your motorcycle. Designed with this in mind, the wide platform covers a large area, easily spanning gaps between frame rails or contacting more surface area on belly pans. The more flat surface you contact, the more stable the motorcycle. Textured rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping.

Slim Fit

What good would a jack be if it couldn't fit under your ride? Many low riders and cruisers offer extremely low ground clearance, making it impossible to use a center-lift jack. However, with a fully-collapsed height of just 4.25", this should never be a problem! Park your motorcycle, slide your jack into position underneath, then lift away!

Reach

Starting at the fully-collapsed height of 4.25", the Extreme Max Wide Motorcycle Jack offers a tremendous 10" vertical travel, topping out at a fully-extended height of 14.5". This height provides plenty of clearance for tire changes, drive chain maintenance, cleanings, tune-ups, and more. While extended, the worm drive acts as a brake, holding the jack at the height you set without needing any clumsy locking bars or brake levers.

Also Available from Extreme Max:

Extreme Max 5001.5044 Motorcycle Scissor Jack

Don't need a dolly? Don't get the dolly. Also available from Extreme Max, the Wide Motorcycle Scissor Jack features the exact same jack without the dolly included. The same effort and quality have gone into this jack, leaving you with the bare-bones, industry-proven 1,100 lbs. scissor jack you crave.

Product description

The center-lift design of the Extreme Max Wide Motorcycle Scissor Jack is perfect for most motorcycle maintenance needs. Without the optional dolly, the jack lifts to an extended reach of 14” while the 15-1/8” x 9” platform holds your bike with a rubber padding that prevents scratching and adds stability. The jack is operated manually by using a 7/8” socket or wrench (sold separately). Measurements: Extended height: 14”; Collapsed height: 3-3/8”; Base: 15-1/8” x 9”; Lifting platform: 15-1/8” x 9”. *Do not use an impact-style wrench to raise or lower the jack.

• Extends up to a 14" height
• Easily hand-operated using 7/8" socket or wrench (sold separately) - *Do not use an impact wrench or powered drill to operate the lift
• Durable rubber padding on platform
• Heavy-duty steel frame
• 1100 lb. weight capacity; will not lift trikes

User questions & answers

Question:	what is the jack height when lowered
Answer:	I mean if the floor is level, then I’d say it’s very stable. Can’t attest to only 25 pounds. I’m on average only lifting 800-1000 lb bikes.
Question:	will this work for my harley trike
Answer:	I have an 83 FLHT on mine and we used a couple of thin pieces of wood under the bike. If you could put a couple of pieces underneath to take up the space. I wouldn't rest my engine on the lift.
Question:	With the dolly, amazon indicated apr 24-may 17 delivery timeframe. does that sound right? that's over a month out. thx
Answer:	I used it on Harleys only. But when I do. I use a flat aluminum disposable baking pan. I also have a large lift that I put my bike on.
Question:	Has anyone attempted using this lift with a late model Indian
Answer:	I don't have an exact answer, you'd probably be better off just getting a dirt bike stand though. I don't think the goes much past a foot. Works great for my Vl800 cruiser. But it's only got 6 in or so of clearance

Product features

Extreme Max Wide Motorcycle Scissor Jack

When it's time to get your motorcycle's wheels off the ground for maintenance or cleaning, look no further than the Extreme Max Wide Motorcycle Scissor Jack! Specifically designed to be one of the strongest and most stable scissor jacks available, the high strength worm drive and heavy-duty steel construction pair together to lift nearly any road bike, touring bike, or cruiser up to 1,100 lbs.

The lift is operated manually by using a wrench on the 7/8" worm drive. Do not use an impact wrench or powered drill to operate the lift.

Strength

When lifting your motorcycle, you want something strong, something you can rely on time and time again. That's why our engineers put in the effort to create a scissor jack with unparalleled strength and ease-of-use. Heavy-duty steel is the main component in the construction of the jack, preventing bending, breaking, and warping – keeping it consistent from it's first use through it's 100,000th use.

Stability

Stability shouldn't be a question when you're lifting anything, especially something as precious as your motorcycle. Designed with this in mind, the wide platform covers a large area, easily spanning gaps between frame rails or contacting more surface area on belly pans. The more flat surface you contact, the more stable the motorcycle. Textured rubber padding prevents any metal on metal contact, protecting your ride from scratching, scuffing and scraping.

Slim Fit

What good would a jack be if it couldn't fit under your ride? Many low riders and cruisers offer extremely low ground clearance, making it impossible to use a center-lift jack. However, with a fully-collapsed height of just 3-3/8", this should never be a problem! Park your motorcycle, slide your jack into position underneath, then lift away!

Reach

Starting at the fully-collapsed height of 3-3/8", the Extreme Max Wide Motorcycle Jack offers a tremendous 10-5/8" vertical travel, topping out at a fully-extended height of 14". This height provides plenty of clearance for tire changes, drive chain maintenance, cleanings, tune-ups, and more. While extended, the worm drive acts as a brake, holding the jack at the height you set without needing any clumsy locking bars or brake levers.

Also available from Extreme Max:

Extreme Max 5001.5059 Motorcycle Scissor Jack with Dolly

Also available from Extreme Max, the Motorcycle Scissor Jack with Dolly features the exact same jack, but adds the addition of a dolly tray to increase its versatility. Sliding your jack into place underneath your bike has never been easier.

Product description

A spare tire carrier is the best way to insure that you're never the guy stuck by the side of the road. This model features durable steel construction with zinc plating for corrosion resistance, and a bolt-on design for easy installation (no cutting, no drilling) on trailer tongues up to 3" wide x 5" high. Fits 4, 5, and 6 lug wheels. 2-year replacement warranty. Material: Stainless Steel

• Spare tire carrier fits most 4, 5 and 6 lug wheels up to 16-1/2"
• Easy bolt-on installation for boat trailers, fits all trailer tongues up to 3" wide x 5" high
• Holds tire with 4-3/4" of lift and 7" of offset
• Heavy-duty zinc-plated steel construction
• 2-year replacement warranty

User questions & answers

Question:	How much weight will this hold? I have a HD spare tire for utility trailer
Answer:	Use within 48 hours after activating. After that it starts to activate and will not spray. Temperature may effect this time a bit.
Question:	Do you like this item
Answer:	This is pretty thick paint and dries bery fast as you apply it. I used this on my motorcycle exhaust and painted it on with a paint brush.
Question:	will this work on a 14 inch rim w/ a 5 on 4 3/4 bolt pattern
Answer:	No catalyst available. This paint heat cures- there is not a chemical cure option.
Question:	I have a limited amount of space on the framr due to a storage box and battery box. How much exposed frame do iI need to mount this
Answer:	No, when you start & run the engine the exhaust system will heat up & cure the paint

Product features

Extreme max heavy-duty spare tire carrier

For a high quality, heavy-duty trailer-mount spare tire carrier, look no further than the Extreme Max Heavy-Duty Spare Tire Carrier! Featuring a heavy-duty zinc-plated steel construction with high quality hardware and easy-to-use bolt-on design, the carrier creates space where there once wasn't, keeping your trailer's spare tire at the ready instead of clogging up your valuable cargo space. With 4.75" of lift and a 7" offset, the carrier accepts most 4, 5, and 6 lug wheels up to 16.5".

Direct-to-Frame Mounting

Easy installation is the name of the game. Fitting standard trailer frames and/or trailer tongues up to 3" wide and 5" tall, the Heavy-Duty Spare Tire Carrier mounts easily with just a couple wrenches and requires absolutely no drilling or cutting, making it easy to reposition or remove when necessary. The frame-mount design also keeps your tire accessible in the event of a flat.

Universal Bolt Pattern Fit

You don't need to know the measurements of your spare tire lug patterns to know that your spare tire will fit or not. By making use of slotted lug holes the carrier adapts lug positions to the rim, instead of vise versa. The Heavy-Duty Spare Tire Carrier will adapt to fit any 4, 5, and 6-hole rims up to 16.5" without any modification.

Quality Mounting Components

Included with every Heavy-Duty Spare Tire Carrier is every piece of mounting hardware required to fit your trailer frame. High-quality U-bolts support the carrier above and underneath the trailer frame, while custom backing brackets feature pre-measured holes to to provide a perfect fit on trailer frames from 2" tall to 5" tall. Two lugs and lug nuts complete the set.

Also Available from Extreme Max:

Extreme Max 3004.4553 Economy Spare Tire Carrier

The Economy Spare Tire Carrier is designed to fit both 4 and 5-lug spare tires with its innovative mounting plate, each mounting with two lugs for a secure hold. While mounted, the spare tire sits vertically just outside the trailer frame, providing easy access in the event that it is needed while remaining out of the way of your boat or other cargo. The close-to-trailer design helps cuts down on wind resistance during travel.

Note: The carrier is not designed for use with 15" wheels or 6-hole lug patterns.

Product description

Get more time on the water with the Extreme Max Boat Lift Boss. This automated system is the faster, easier way to lift your boat while maximizing lift capacity and minimizing strain. Extreme Max offers the highest quality, lowest cost boat lift power products on the market. Using American ingenuity and craftsmanship, we've created the safest product available. We deliver unbeatable savings, safety and quality. Each unit is wired and assembled by hand in Lino Lakes, MN and tested three times for quality control before packaging. Boat Lift Boss Direct Drive models offer custom quick-mount installation kits for simple installation and perfect fit. Extreme Max engineers all mounting systems for strength, stability and easy installation. DC models run on either 12V or 24V battery power. This Boat Lift Boss unit is equipped with a pigtail connector that allows compatibility with the optional Boat Lift Boss Pendant Controller, Extreme Max part number 3005.7284. Solar Panel(s) recommended for all DC models. Powering DC Boat Lift Boss models with 24 volts will nearly double lift speed. Additional battery, solar panel, and wiring required. Lift-specific installation kit required (sold separately). Available Components: Solar Panels: 3004.0176 (12V) or 3004.0184 (24V), Connection Harness: 3005.7249, Battery Trays: 3005.4125 (Post-Mount Single), 3005.4125 (Post-Mount Dual), 3001.3285 (Under Canopy Single), 3005.4128 (Under Canopy Dual).

• Extreme Max Boat Lift Boss Direct Drive System 12V/24V Key-Turn is the fastest and easiest way to lift your boat
• Maximize your lift capacity and minimize your strain with our quick-mount installation process
• Sealed, all-weather resistant electronics with quick and quiet operation
• Works with single or dual marine battery power
• Assembled and wired in the USA with a two-year warranty

User questions & answers

Question:	is there a way to lift boat if power is out on the 120 v system
Answer:	Yes it is.
Question:	Have rgc lift model cwr18lt , vl45116t will this be compatable (do i need "mounting kit") thanks
Answer:	This paint is particularly manufactured to be used on metals.
Question:	Does the wireless remote also come with a light control
Answer:	This would have excellent adhesion on aluminum.
Question:	How do i purchase a replacement key for the above "boat lift boss
Answer:	You use that red button at the bottom of the can to pierce the inner chamber at the bottom of the can, and it activates the 2k coating.