8 best rated fishing boats

Product description

Product Description



MPNDoes Not Apply

BrandHANGKAI

Model60V 10.0HP

HP10.0HP

Rated power (W)2200

Starting systemSwitch knob added

Motor typeBrushless motor

Rated voltage (V)60

Rated speed (r/min)3000

Rated current (A)38

Control systemTiller control

Rod length (cm)91

G.W./N.W.(kgs)17/14

Total height (cm)132

Transom plate height (mm)381 ~ 508

10HP 2.2KW Outboard Motor Electric Boat Engine Boat Kayaks Propeller Boat Parts

Be as one with the silent world with this Genuine outboard motor. With huge thrust, a super-strong shaft and speed control, it will put the bait just where it needs to be without the fish ever knowing you're there.

With super-low power consumption, the Genuine gets the most out of your 48V battery. Suitable for small water crafts such as inflatable boats, canoes and aluminum fishing boats. Simply twist the handle and sneak up on the fish at the optimal speed.



Specifications

Brand：HANGKAI

Model：60V 10.0HP

Rated power (W)：2200

Starting system：Switch knob added

Motor type：Brushless motor

Rated voltage (V)：60

Rated speed (r/min)：3000

Rated current (A)：38

Control system：Tiller control

Manipulation mode

Rod length (cm)：91

G.W./N.W.(kgs)：17/14

Total height (cm)：132

Transom plate height (mm)：381 ~ 508



Battery model recommendation：

Choose batteries with a capacity of over 120AHNote:the product does not contain the battery.

Warranty:1year warranty



Application area

Used in fishing, aquaculture, outdoor adventure, etc.

• 1. Strong power, Low energy consumption and Long service life because of the pure copper core brushless motor
• 2. A muffler works for the motor to decrease the noise.
• 3. Anti-winding function when Increase the thickening of the propeller,Omni-directional rotary joystick
• 4. Aluminum alloy suspension bracket: 90° rotatable bracket, more stable and durable
• 5. Easy to install, the motor can be mounted on board without any tools

User questions & answers

Question:	How deep can the camera be lowered
Answer:	They are all one size
Question:	How do I purchase an additional battery
Answer:	its nice was actually able to fit both of my wreaths in one, so the other one i bought i used it for my towels , Christmas kitchen, bathroom sheets all fitted it
Question:	Dose this have tv out
Answer:	The 36" easily holds 2 wreaths and could possibly hold a 3rd depending on how decorative it is.
Question:	Does the display screen fail to see clearly because of the reflection in the intense sunlight
Answer:	I bought two of these for the Cone wreaths. Bags are heavy plastic and handles and zipper are heavy nylon canvas material. Secured quite well and sewed to the front and back of the bag. They are just for storage of the wreaths. I was happy to put the wreaths my mother (who is now deceased) in them for protection. I hope this answers your question.

Product features

7 inch Color Screen with 8GB SD Card

The 7-inch TFT color display with removable sun visor is very suitable for bright environment. It has DVR function, can record underwater scenery, free 8GB SD card, the maximum compatible SD card is 64GB.

Super Clear Night Vision

This visual night light underwater camera fish has 15 infrared lights and 15 white lights. The infrared lamp is specially designed for the dark, so that you can observe the fish in the dark environment.

30pcs IR and white LEDs

The image display is more lifelike and refined. The camera has 15pcs IR LEDS and 15pcs white LEDs. There are four light modes.The same is to turn on IR light and white light and turn off both lights at the same time.

Recreational Fishing

River Fishing

Lake Fishing

Ice Fishing

• ? Five forward speed and three reverse speed provide the exact speed control for fishing. ?The OSAPIAN 50703 55LBS 35.5 inch aluminum alloy shaft makes it easy for different height adjustments and The available shaft length is about 24.4 inch, suitable for different type small boats, like Kayaks, Dinghies, Tenders, Fishing boats, inflatable boats and almost all transom small boats, meantime can be conveniently operated while seating. It is light and easy to carry.
• ? Enhancing anglers steering more comfort and convenience, the ergonomic handle with extensible 13.7 inch in length, you can easily steering when necessary. ?Haswing OSAPIAN 50703 55LBS 35.5¡± Shaft Bow mount trolling motor is designed and engineered to run quieter than ever before. So quiet that the fish will never hear you coming.
• ? The OSAPIAN 55LBS transom trolling motor can easily be tilted in and out of the water when the depth or fishing condition change, and the shaft height is adjustable by way of a quick lock, so you can deploy motor in virtually any water. Furthermore the OSAPIAN 55LBS Trolling Motor is suitable for different height of boat transom.
• ? The trolling motor can be set up both in fresh water and salt water, it is designed to have excellent corrosion resistance, using a sacrificial anode that protects important metal components. ?The 3 blade propeller provides better acceleration and ensures optimal performance and can be powered by One 12 volt deep cycle battery.?The LED Power Reader can let you check accurate available battery power anytime so that you can plan the fishing trip conveniently.

User questions & answers

Question:	Can i use a stronger battery without problems? ie; 12v (bci group 24m, 31m), 105ah, cranking amps 800 = longer fishing
Answer:	I had two pull three of the center tubes. You will also need to modify the tray beneath the tubes. I had to cut out some foam and bend the edges of the aluminum rod tray in order to make the pedal tray fit between the rod tray sidewalls. There are some great videos of this on You tube.
Question:	I have one of these i bought a year ago here. How can i bypass the forward/reverse and speed control in tiller and mount an external hand controller
Answer:	Herbert, also consider that I use this motor on a 12' kayak. My average current use is 12Amps/hr - that is at a "3" setting on the handle. If I had a heavier boat, I would increase the power used by using the "5" setting (to maintain the equivalent speed). That would use about 20 amps/hr. So you can see that would almost double the power use that I would use, bring the HP rating to double the .193 HP/hr = .386HP/hr. But the battery life would be cut in half. If you had a double the size battery of 150Amp/hr battery - which is pretty large, you would end up with 2.316 HP/6 hours. I believe that would be the maximum case. One answer mentions thrust. I calculate a thrust of 75.5 newton meters = 55.68 ft/lbs. Some rounding errors there. That pretty well matches the 55 pound thrust specification. If anyone gives you any problem - tell them that electric motors are not rated in horsepower, but the motor does have a thrust rating of 75.5 newton-meters. Ask them if they could convert that to a equivalent HP rating? As they stare at you like you have 3 eyeballs, tell them that : "I have already made the conversion and it equals to .386HP at maximum thrust." Watch the person say : " Uhhhh-yea - that's about right ....good....uh ...do you have your life jacket?......yea?..great ..uh..gotta go......have a nice day!"Watch person jump into truck - peeling away wondering what in the heck a newton-meter is.
Question:	What diameter is the shaft
Answer:	Hi, The 36lb NV Series motor draws 29 Amps at top speed. Hopefully this helps! If you have more questions or need additional help, please visit newportvessels.com or give us a call at (866) 721-0002! Our hours are M-F, 8:30am-4:30pm Pacific Time. Best, -NV Team
Question:	pounds thrust is way more than I need for a 16 foot canoe. Will it hurt the efficiency when used at very slow thrust
Answer:	I have a 12' Valco Aluminum boat and it pushes it around pretty good in the 5th forward speed. Prob got up to 5 or 6 mph. I never did it for very long though so not sure how long the battery would last doing that all day. Goes pretty slow until you kick it into the 5th gear and then you feel a nice push. Also have not tried it into any kind of head wind or current.

Product features

AQUOS Haswing Osapian 12V 55LBS Transom Trolling Motor

• The Osapian 12V 55LBS Transom Trolling Motor can be set up both in fresh water and salt water, it is designed to have excellent corrosion resistance, using a sacrificial anode that protects important metal components.

Extendable handle

• Enhancing anglers steering more comfort and convenience, the ergonomic handle with extensible 13.7 inch in length, you can easily steering when necessary.

Speed Control

• Five forward speed and three reverse speed provide the exact speed control for fishing.

110° Folding Handle

• 110° Folding Handle give you more flexible helm in your fishing movement.
• Conveniently to control the boat while sitting or standing

Ten Level Titling Position

• OSAPIAN 55LBS motor can easily be tilted in and out of the water when the depth or fishing condition change. And it's suitable for different height of boat transom.
• The shaft height is adjustable by way of a quick lock, so you can deploy motor in virtually any water.

Shaft Length

• 35.5 inch Aluminum Alloy Shaft makes it easy for different height adjustments.
• The available shaft length is about 24.4 inch, suitable for different type small boats, meantime can be conveniently operated while seating.

Power Reader

• The LED Power Reader can let you check accurate available battery power anytime so that you can plan the fishing trip conveniently.

• Solid Fiberglass Blank Rod for extra power
• Include Aluminum Bent Butt
• Year Warranty
• Cross Cut Butt

User questions & answers

Question:	Is this rod made in China
Answer:	we changed the limit, you can go ahead and purchase
Question:	El grosor del porta reel cual es, estoy buscando un bent butt para usatlo con un penn 30 international
Answer:	The bags themselves are not sturdy. I do stack mine since the wreaths aren’t that heavy or fragile.
Question:	how long is this rod
Answer:	I believe it would the storage bags are pretty big. I was able to fit to large wreaths.

Product features

Ready for some big fish!

Our bent butt rods are built to withstand high pressure from larger fish like tuna, and marlin. The combination of our stiff solid fiberglass blank and 5'6 length provides great feedback and control.

Roller Tip

The Roller tip contains two rollers in the housing. the housing is made of aluminum and the two rollers are made from stainless steel. The rollers are supported with cylinder bearing to guide the rollers smoothly.

Blue & Black Weave

Beautiful black and blue X weave provides a nice look to the rod.

Roller Guide

The Roller guides on the rod are able to withstand high pressures from larger fish. The guide housing is aluminum while the roller itself is stainless steel. The roller is supported with a cylinder bearing to guide the roller smoothly.

Solid Fiberglass Blank

The rod construction is a solid fiberglass blank. This type of blank will provide quick feedback due to its naturally stiff nature. It is able to take on a tremendous amount of force, while still maintaining a controllable rod when fighting a fish.

Grip

X cut textured grips on the rod. Provides a secure yet comfortable feel when fighting game fish.

Bent Handle

Solid aluminum bent butt handle. The handle is designed to take on big game fish and maintain control when having a larger reel on the handle. The bottom of the handle does include a cross cut butt for easy mounting.

Reel Seat

The reel seat is built to handle reels of all sizes from a 30w to 130w+. The hardware securely holds the reels in place.

Rod & Handle Connection

Rod & Handle mounting point is secure and aligned. Connection is secured with tightening of hardware.

Coastal Fishing: Designed by Fisherman. For Fisherman.

All of Coastal Fishing products have been designed and tested in the real world. We stand by our products and are always looking for ways to improve them. Our pledge is to deliver exceptional fishing rods, reels, lures, and gear that is affordable. We accomplish this by selling our gear direct to customers.

Product description

The Lindy Fisherman Series Drift Sock provides a convenient, simple and economical way to slow your drift or more-precisely follow breaklines or other fish-attracting structure when the wind kicks up. The Fisherman Series deploys with ease and dries quickly for convenient storage. The design resists spinning or tangling, and reinforced nylon prevents fraying. Anglers facing windy conditions have always struggled with boat control. Not only is it difficult to stay on fish-holding structure in the wind, it is also very tough to consistently present live bait and lures to fish. With the aid of Lindy Drift Control products, this becomes not only possible, but easy. For years, anglers concocted their own methods of dealing with wind and waves. Many tied 5-gallon buckets to their cleats to create drag; others added as much as 500 pounds of sand on the inside of the boat to hold it down in the waves. Sand bags help to reduce bouncing, but they cause sore backs and greatly reduce speed and acceleration in better conditions. The biggest problem with these methods is their lack of convenience. The folks at Lindy Drift Control set out to create a product that solved all of the problems. The result was a drift sock that does much more than that. Lindy Drift Control Drift Socks are tough, dependable and easy to use. Plus, they dry quickly and pack small so they can be stowed in boat storage compartments. Try a Lindy Drift Control Drift Sock one time and it will become one of the most beneficial, hassle-free tools to put more fish in the boat, even when conditions hamper other anglers. The reinforced nylon material on the Fisherman Series Drift Sock is coated for durability and water-resistance, and resists fraying from normal use. This material also holds up in shallow-water conditions. The Fisherman Series comes with a dump line already attached, making retrieval a snap. For serious anglers, Lindy Drift Control Drift Socks are essential to angling and boat control.

• Imported
• SIMPLE AND EFFECTIVE: Provides a convenient, simple and economical way to slow your drift or more-precisely follow breaklines or other fish-attracting structure when the wind kicks up
• EASY TO USE: Deploys with ease and makes staying on fish-holding structure in the wind not only possible, but easy; Dries quickly and packs small so it can be easily stowed in boat storage compartments
• TANGLE-FREE: Slows your drift and controls your boat without tangles or snags thanks to its tangle-resistant and spin-resistant design
• TOUGH AND DURABLE: Reinforced nylon material is coated for durability and water-resistance, resists fraying from normal use, and holds up in shallow-water conditions
• HASSLE-FREE RETRIEVAL: Comes with a dump line already attached for simple, easy retrieval

User questions & answers

Question:	I want to slow my 22' pontoon down while trolling. What size would work best
Answer:	Definitely. The foam will hold it in place. Of course it depends on how big is the knife.
Question:	Does it float or sink
Answer:	No. But I have a Browning BuckMark, 7" barrel in mine, and a Ruger single shot 6 revolver sits above it.. both on the same level... there are two levels that you can carrying four handguns total...
Question:	What size for a 17' 6" alumacraft boat
Answer:	This should hold up in a hot attic. I have used it for 2 years now, stored in a NC attic and it is still like new.
Question:	How small does the 36 inch fisherman series fold and how much does it weigh
Answer:	On the package it comes in it says MADE IN CHINA

Product features

Lindy Drift Control

Anglers facing windy conditions have always struggled with boat control. Not only is it difficult to stay on fish-holding structure in the wind it is also very tough to consistently present their live bait and Lures to fish. With the aid of Lindy drift control products this becomes not only possible but easy. For years’ anglers connected their own methods of dealing with the wind and waves. Many tied 5 gallon buckets to their cleats to create drag; others added as much as 500 pounds of sand on the inside of the boat to hold it down in the waves. Sandbags help to reduce bouncing, but they cause sore backs and greatly reduce speed and acceleration in better conditions. The biggest problem with these methods is their lack of convenience. The folks at Lindy Drift Control set out to create a product that solved all the problems. the result was a drift sock that does much more than that.

Magnum Series

The Lindy Drift Control Magnum Series was created with Rip-Stop nylon fabric, a material known for its incredible strength and lightweight. These drift socks are designed for boat control in extreme conditions and are as tough as the anglers who use them.

Fisherman Series

The reinforced nylon material on Fisherman Series Drift Sock is coated for durability and water resistance and resist fraying from normal use. This material also holds up in shallow-water conditions. (Small to Larger Fisherman Series).

Original

The Original Series comes with a 1 inch nylon strap for added support and strength, and provide more drag than other drift socks of the same diameter.

Wave Tamer

The Lindy Wave Tamer has a spring open design with built in flotation. Use to stabilize and position your boat, tough enough for trolling.

Product description

Don’t let a little wind ruin your fishing trip. The Lindy Magnum Series Drift Sock provides more drag than other socks of the same diameter, giving you more-precise boat control. It provides more drag than other drift socks of the same diameter. A unique flotation device and bottom weights yield faster deployment and prevent rotation. Packed with Harness Buoy. Anglers facing windy conditions have always struggled with boat control. Not only is it difficult to stay on fish-holding structure in the wind, it is also very tough to consistently present live bait and lures to fish. With the aid of Lindy Drift Control products, this becomes not only possible, but easy. For years, anglers concocted their own methods of dealing with wind and waves. Many tied 5-gallon buckets to their cleats to create drag; others added as much as 500 pounds of sand on the inside of the boat to hold it down in the waves. Sand bags help to reduce bouncing, but they cause sore backs and greatly reduce speed and acceleration in better conditions. The biggest problem with these methods is their lack of convenience. The folks at Lindy Drift Control set out to create a product that solved all of the problems. The result was a drift sock that does much more than that. Lindy Drift Control Drift Socks are tough, dependable and easy to use. Plus, they dry quickly and pack small so they can be stowed in boat storage compartments. Try a Lindy Drift Control Drift Sock one time and it will become one of the most beneficial, hassle-free tools to put more fish in the boat, even when conditions hamper other anglers. The Magnum Series Socks are created with Rip-Stop fabric, a material known for its incredible strength and light weight. These Drift Socks are designed for boat control in extreme conditions and are as tough as the anglers who use them. Rip-Stop material also dries quickly and rolls up for convenient packing in your boat storage compartment. Includes 1-inch straps for added support and strength.

• Trusted and used by experts
• Works with all standard gear
• Quality assured products
• Easy to use for beginners and Pros

User questions & answers

Question:	Is the referenced 40" dimension the diameter of the opening or the length of the drift sock from front to back (makes a very big difference
Answer:	The internal dimensions are (as measured by myself) 16" W x 11.5" tall and on each side of the handle you could probably fit a magazine 1" wide x 4" long.I was able to fit an M&P 9mm 10 round mag on either side of the handle and close the case.
Question:	Does the magnum have a sewn "eye" so I can attach a rope and buoy to make a dump line
Answer:	Probably, but it depends on the guns. I'd guess as many as 6 of average size of you arranged them carefully. It holds my 4 with room to spare.
Question:	does this item include the float with strap to attach to boat
Answer:	It would work pretty good. You could cut out the foam insert to fit your piece. We use it to transport glass as well.

Product description

Lindy Wave Tamers eliminate drift sock problems even for large fishing boats. Patented, spring-open design and surface flotation ensure easy deployment and a hassle-free retrieval. No collapsing, sinking or spinning. Lindy Wave Tamers stabilize and slow your boat in windy conditions, as well as give you more-precise control to follow breaklines or other fish-attracting structure. Tough enough for trolling and saltwater.

• SIMPLE AND EFFECTIVE: Provides a convenient, simple and economical way to slow your drift or more-precisely follow breaklines or other fish-attracting structure when the wind kicks up
• EASY TO USE: Deploys with ease and makes staying on fish-holding structure in the wind not only possible, but easy; Dries quickly and packs small so it can be easily stowed in boat storage compartments
• PERFECT BOAT CONTROL: The Wave Tamer stabilizes and slows your boat in windy conditions giving you precise control even for large fishing boats; Sock won't collapse, sink or spin, giving you even more precise control
• TOUGH AND DURABLE: Saltwater resistant fabric is tough enough even for trolling and saltwater use
• HASSLE-FREE RETRIEVAL: Patented, spring-open design and surface flotation ensure easy deployment and a hassle-free retrieval

Product features

Lindy Drift Control

Anglers facing windy conditions have always struggled with boat control. Not only is it difficult to stay on fish-holding structure in the wind it is also very tough to consistently present their live bait and Lures to fish. With the aid of Lindy drift control products this becomes not only possible but easy. For years’ anglers connected their own methods of dealing with the wind and waves. Many tied 5 gallon buckets to their cleats to create drag; others added as much as 500 pounds of sand on the inside of the boat to hold it down in the waves. Sandbags help to reduce bouncing, but they cause sore backs and greatly reduce speed and acceleration in better conditions. The biggest problem with these methods is their lack of convenience. The folks at Lindy Drift Control set out to create a product that solved all the problems. the result was a drift sock that does much more than that.

Magnum Series

The Lindy Drift Control Magnum Series was created with Rip-Stop nylon fabric, a material known for its incredible strength and lightweight. These drift socks are designed for boat control in extreme conditions and are as tough as the anglers who use them.

Fisherman Series

The reinforced nylon material on Fisherman Series Drift Sock is coated for durability and water resistance and resist fraying from normal use. This material also holds up in shallow-water conditions. (Small to Larger Fisherman Series).

Original

The Original Series comes with a 1 inch nylon strap for added support and strength, and provide more drag than other drift socks of the same diameter.

Wave Tamer

The Lindy Wave Tamer has a spring open design with built in flotation. Use to stabilize and position your boat, tough enough for trolling.

• ROD CUSHION: The Calcutta Rod Cushion is a great fishing accessory with a tapered opening that can hold any size gimbal or standard rod butt. The 3 inch diameter will keep up with you during offshore trips on the water.
• DURABLE: The dimpled design helps keep the cushion from slipping when landing a fish. With a soft yet durable UV resistant EVA foam construction, it will be long lasting to get you through the day on the boat.
• COMFORTABLE: This cushion adds comfort when fighting that trophy fish and is easier to use than a fighting belt. Keep your balance while having a pad to avoid your waist and belly from bruising.
• FISHING: All fishermen and anglers will never be disappointed with this cushion as part of their equipment. It will float if it goes overboard and can be packed in a bag or stored on the boat to always have it with you at a moment’s notice.
• CALCUTTA: Born in the back of a Florida tackle shop in 1991, Calcutta was created with a rebellious spirit and an ambitious goal to build hardworking gear for those with a passion for the outdoors.

Product features

COOLERS

Calcutta coolers are durable and provide extreme ice retention in the toughest conditions. And our hard coolers come with a 100 Lumen light built in to the drain plug.

SUNGLASSES

Calcutta Original Series and Discover Series sunglasses provide 100% protection against harmful UVA and UVB rays. Don't leave for your next adventure on or off the water without your Calcutta's.

FISHING GEAR

From lures to surf carts, fighting belts to tools, Calcutta has a vast array of items you might be looking for to have on your next fishing trip. Be prepared for anything on your next escapade.

APPAREL

Whether you are lounging by the lake or need a performance fishing shirt, we've got you covered. With options for men and women, get prepared for your next outdoor activity.

Calcutta Rod Cushion

The dimpled design helps keep the cushion from slipping when landing a fish. With a soft yet durable UV resistant EVA foam construction, it will be long lasting to get you through the day on the boat.

All fishermen and anglers will never be disappointed with this cushion as part of their equipment. It will float if it goes overboard and can be packed in a bag or stored on the boat to always have it with you at a moment’s notice

Product description

High quality & heavy duty salt & freshwater inflatable sport dinghy tender boat. Boat is tested and designed for both 15" short shaft outboards and 20" long shaft. For optimal performance we recommend a 15" short shaft outboard. Can handle both 2 or 4 stroke motors. Comes with all original paperwork needed for easy and hassle free registration. Newport Vessels is USCG rated and registered. Unique and original Hull ID/HIN numbers with each boat Comes with Newport Vessels 2 year warranty.

• USCG rated triple layered 0.9mm/1,100 denier specialty coated PVC, marine wood flooring Inflatable sport boat tender.
• Includes: Aluminum Framed Marine Wood Flooring, 2 aluminum bench seats, 2 aluminum oars, carrying & storage bag, foot pump, drain plug, towing D-rings, topside D-rings for Bimini and accessories, carrying handles, oar locks and oar holders
• Materials: Boat: Triple Layered 0.9mm / 1,100 denier Polyester reinforced and anti corrosive coated PVC. Material ensures protection against corrosion, sun, salt, and all destructive elements.
• Materials: Floor: 24mm thick aluminum framed custom hard marine coated plywood floor.
• Dimensions and Specificatons: Model: The Baja Inflated Length: 11 ft 9 in, Tube Diameter 18 in, Inflatted Width: 5 ft 5in, Chambers: 4, Weight: 150 lbs, Max Power: 20hp, Max Load: 1,519 lbs, Max Persons: 6, High pressue inflatable Keel & V hull.

User questions & answers

Question:	Did I make a mistake by buying the new Honda 2.3 for this boat
Answer:	The 1404 can hold 4 pistols/revolvers. I can fit 4 N frame S&W w/8.375 barrels. I have a second that carries 2 large frame scoped hand guns with room to spare. Great for range transport and can be found for under $10.
Question:	Should I register such boat? Thanks
Answer:	Just the foam, not any of the fire arms or magazines. It is a good case for the money.
Question:	Will this fit in the back of my Toyota Tundra pick up fully inflated
Answer:	It is available on Amazon (06/25/18) for $11.99. Good value. But I would not use it to travel (checking it at the airport).
Question:	The photo for the Baja shows only a single seat but the description says it comes with
Answer:	I am unsure of the specifics... I managed to get a mix of 8 pistols in this case for a range visit this weekend. It is not a super hard case and does have some give, but that should be expected at this price point. I only use it for range visits. It is easier to use then rugs and a range bag. From looking at the Plano site they are extremely similar and the descriptions are the same. http://www.planomolding.com/product.php?BCCID=119&PID=868 & http://www.planomolding.com/product.php?PID=1164

Product features

Why Should You Buy A Newport Vessels Inflatable Boat

The 11ft 9inch Baja model inflatable boat is the perfect mix of portability and performance. The oversized 18 inch tubes make this dinghy one of the most stable boats on the market; whether floating at the dock or traveling at high speed. The wide footprint of the 11ft 9inch Baja makes for a solid foundation for easily boarding and loading the boat. This solid foundation makes for a low center of gravity and stable ride platform during times of high speed and turning, and with the inflatable keel and a 10-15hp motor, it’s easy to get on plane! Recent updates also include additional D-Rings for Bimini attachments and other accessories!

Construction

Newport Vessels inflatables are made with high quality Korean PVC and seams are Hot Air Welded. All of this adds up to make a dependable boat with great performance for years to come.

Build

Newport Vessels maintains a meticulous manufacturing process focused on quality control, including pressure, leak, UV, and stretch tests throughout the boat’s construction. Started in 2008 the Newport Vessels design team is constantly improving our inflatable boat designs and manufacturing quality controls to create superior inflatable boat products.

Customer Support

Every Newport Vessels inflatable must be registered in your state if you plan to place a motor on it. To receive documentation, please fill out our Registration Doc request on our site or contact Newport Vessels after you have received your vessel. We will need your receipt, name, address and boat serial number to send your documents. Once received, we will ship it out the following business day.

Post Sale Support

Our California based customer support team is dedicated to your satisfaction with your purchase. If you have any questions or concerns, please do not hesitate to reach out to us via our website or phone!

Frequently Asked Questions

1. How many people can it sit comfortably? - Max seating is 6. It comfortably sits about 4 persons.
2. What is Aluminum Framed Marine Plywood? - It's marine plywood that has aluminum around the border. This allows the pieces to connect to each other.
3. How should I store my dinghy? - Clean, dry, deflate, roll up and store in a climate controlled environment. If inflated, use a cover to protect it from UV rays and do your best to keep it out of direct sunlight, heat, humidity and extreme colds.
4. What should the middle Bow D-Ring be used for? - Not for towing! This is a grab handle that should be only used for lifting the boat, mooring or to tie the anchor onto. Improper use will damage the D-Ring. Use a bridle to tow your dinghy.
5. How do I know if my dinghy is fully inflated? - The supplied foot pump is designed NOT to over-inflate the boat. Pump until air is no longer being pushed into the chamber and all wrinkles are gone.