10 best paintball valves

Product description

IORMAN Universal 4500PSI Paintball Air Tank Regulator, 5/8"-18UNF Inlet Thread Size, G1/2-14 Outlet Thread Size, Comes with Standard 8mm Male Quick Disconnect Foster Fitting Adapter.

• Max up to 4500psi high pressure gauge input, 800psi regulated output.
• Fits most of air tanks with inlet threads 5/8"-18UNF, the outlet threads size is G1/2-14.
• Premium quality regulator comes with a 3k and 7.5k burst disk.
• Comes with standard 8mm quick disconnect male foster fitting adapter for filling.
• The regulator is high air flow rate, light weight, easily operation and re-buildable, applicable medium with Air/CO2.

User questions & answers

Question:	whats the diameter of the main body
Answer:	When I used I used only co2 it was easier for me to get filled but not sure bout the hpa tank I had purchased but returned was hard for me to find a place to fill in my area,I am pretty sure it will fit (sorry)they normally do
Question:	Can I pop this on a empire carbine fiber tank
Answer:	Yup! There's a small screw similar to an Allan key type that you unscrew and the regulator pops right off
Question:	Can you turn it off
Answer:	Yes. Worked great on my brothers g5
Question:	I just bought this for my iorman 4500 psi tank. i assume the bottom goes into the tank. what do i need to purchase that fits on top of this
Answer:	Yes, this tank can be used with the D3FY markers

Product description

Re-fill standard paintball tanks for 12oz, 16oz, 20oz, 24oz, etc. W/ease. MAddog paintball Co2 fill station, Co2 dual valve bottle refill station offers 2 quick release valves prevent fumbling around or over filling. Heavy duty, durable construction, compatible with all standard Co2 paintball tanks on the market. Save time, fill from home.

• CO2 Dual Valve Paintball Tank Refill Station for 12oz, 16oz, 20oz, 24oz. Tanks etc.
• 40 Inch Stainless Steel Dual Braided Hose
• Heavy Duty Tank Connector + Dual 1/4 Turn Valves
• Heavy Duty Fill Valve w/ On/Off
• Compatible with All Standard US CO2 Paintball Tanks

User questions & answers

Question:	What is the thread size of the hose connected to it
Answer:	Both side
Question:	I plan on renting a tank and having it filled with Co2 for paintball. Does this need any extra gauges or fittings
Answer:	Yes
Question:	Can you use this on an air compressor
Answer:	with the use of an adapter. Otherwise no
Question:	How do i get my filler to fill soda stream tank
Answer:	Yes the fitting are already on the hose.

• Reusable & Washable
• One Size Fits Most / 5-Layer Fabric
• Elastic Ear Loops
• Nose Support

User questions & answers

Question:	does this dump the pressure between the bottle and the asa when you turn it off, to allow easy bottle removal
Answer:	No it runs 5 seconds then pauses for 3 seconds and so on
Question:	Is the small knob hard to turn
Answer:	It does not necessarily have to be compatible with a call, it just makes it nice to start and stop it from the remote that comes with the ICOtec 350 caller. It does work as a stand alone decoy, I personally wanted to have the option of turning it off with my caller remote.
Question:	Would this allow me to store an air through stock marker with the tank attached, indefinitely
Answer:	Yes, the cry mimicked by this call will bring in the doe before, during, and after the rut. This call is great...it call's in does as well as buck's depending on the season's. I can usually call in does within 10mins of calling with this Quaker Boy call. Well worth buying and adding to the arsenal!
Question:	That thread sizes does this unit have
Answer:	We would have to say it does simply because it is me out of plastic.

Product description

Product Description

- Filling station with max to 40mpa pressure gauge, included the O-rings apron attached.

- Stainless Steel Regulator Valve Gauge that comes with International Standard connecting thread-M18.

- High pressure input regulator valve one-way safety valve readings up to 4500psi

- It is most economical high performance tank regulator large numbers and red, yellow and read indicators for easy monitoring.

- Carbon fiber bottle to vial standard filling system.

- Use the seismic pressure gauge, accurate standard, quality and durability.

Product Featuers

- Import working pressure: 20-30mpa / 200-300bar.

- Import connection thread: M18x1.5-6H.

- Export link thread: Standard 8mm quick disconnect adaptor.

- Connection: Filling hose with 8mm female quick disconnect adapter.

- Built Material: Stainless Steel body, hose with spring protection wire.

- Safety: Explosion-proof screw ensure safe filling.

Product Packing List

1x M18x1.5-6H Regulator

1x 8MM Quick Disconnect Hose

Note:

Please double check the thread size when you purchase, avoid unnecessary misunderstandings.

• Integrated DIN valve male thread size is M18x1.5-6H, Working pressure: 20-30 Mpa / 200-300 Bar / 3000-4500 PSI.
• High Pressure Hose: 57mm lenght stainless steel spring protector hose, 8mm dual quick-disconnect female converter.
• Carbon fiber tank to vial standard adapter system, 8mm quick disconnect male output directly into air cylinder, with standard high pressure port and quick refilling.
• Material: Stainless steel, Style: High pressure output regulator valve with pressure gauge, can be used with DIN connector.
• Need to compatible with threads of valves, using for high pressure air cylinder, SCBA cylinder, SCUBA diving steel cylinder or PCP tanks,easy to assemble and install for Air / CO2 filling.

User questions & answers

Question:	is this a 300 Din valve
Answer:	Yes.
Question:	Which regulator fits the 6.8l tank 7/8 thread
Answer:	Here it is. https://www.amazon.com/dp/B0798LSYFR?ref=myi_title_dp
Question:	where can I get the safety pop off valve discs? Mine ruptured at 4000lbs and released the air. Needs to be replaced
Answer:	Search for Captain O-ring HPA burst discs. I’d go with the 5k version personally. They’re about $8.00 bucks for 2.....
Question:	Will this fill our small CO2 canisters for the paint ball guns
Answer:	Yes, it will.

Product description

Features: 

1. Knob type exhaust valve, the air outlet is very smooth.

2. It is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints.

3. The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use.

4. 6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank.

5. The hand tight CGA347 nut and nipple for connecting with SCBA(Fire fighting) tank.

6. 24 inch long x 0.070 inch ID(DN2) micro-bore hose.



Specification:

Material: Sainless Steel

Color: Silver

Whole Length: Approx. 80cm/31.5in

Weight: Approx. 560g



Package list:

1 x Charging Adapter with Hand Tight CGA 347 Connector

• 【Unique Design】:This Charging Adapter Knob type exhaust valve, the air outlet is very smooth.
• 【Connector Size】:This Charging Adapter with Hand Tight It is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints.
• 【Scenes Used】:This CGA347 Connector The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use.
• 【Working Pressure】:This Paintball Fill Station 6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank.
• 【SuitableSize】:This PCP SCBA Fill Station 24 inch long x 0.070 inch ID(DN2) micro-bore hose.

Product description

60cm Hose 4500 PSI Paintball PCP DIN Fill Station Refill Charging Adapter G5/8

Specifications:

Material: Copper + Nylon

Color: Silver+Black

Outlet Thread:8mm

Interface Type:5/8 Quick Insertion

Measuring Range:0-4500(PSI)

60cm Microbore Hose

Features:

-Inflators are designed for convenience and reliability

-Easy to read pressure gauge

-Durable brass fittings

Packages:

1 x Refill Charging Adaptor

• 【SPECIFICATIONS】 - Outlet Thread:8mm;Interface Type:5/8 Quick Insertion;Measuring Range:0-4500(PSI);Material: Copper Nylon;Color: Silver Black;60cm Microbore Hose
• 【SMOOTH DESIGN】 - This paintball fill station type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long service time.
• 【EASY TO READ】 - This paintball charging adapter inflators are designed for convenience and reliability. Easy to read pressure gauge, durable brass fittings.
• 【UNIQUE DESIGN】 - 4500psi fill station designed for filling a paintball tank, or an air rifle.Small size and lightweight, easy to carry and store, convenient to use.
• 【100% SATISFIED SERVICE】 - US STOCK & FREE SHIPPING! FAST Delivery from our US warehouse(CA or NJ)! Wayclound is a professional team. If you have any questions about the product, please contact us. We will provide after-sales service 24 hours a day.

User questions & answers

Question:	I have a scuba tank yoke and I am looking for an adapter to fill pcp air rifles. Is this the correct adapter for the scuba yoke
Answer:	Take the back off the motor (2 screws) there is a switch. Push the switch to the 115 option.

Product description

Why choose our charging adapter with hand tight?

1. The paintball fill station adapter adopts knob type exhaust valve, the air outlet is very smooth.

2. The paintball fill station adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints.

3. The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that the paintball fill station adapter is very suitable for outdoor use.

4. 6000psi fill station designed for filling a paintball HPA tank, or an air rifle from an SCBA (fire fighting) tank.

5. The hand tight CGA347 nut and nipple of this paintball fill station adapter for connecting with SCBA(Fire fighting) tank.

6.The paintball fill station adapter with 24 inch long x 0.070 inch ID(DN2) micro-bore hose.



Specification:

Material: Sainless Steel

Color: Silver

Whole Length: Approx. 80cm/31.5in

Weight: Approx. 560g



Package list:

1 x Paintball Fill Station

• Knob Type Exhaust Valve: The paintball fill station adapter adopts knob type exhaust valve design to make the air outlet smooth
• Hand Tight CGA347 Nut and Nipple: The paintball fill station adapter is using the hand tight CGA347 nut and nipple for connecting with SCBA(fire fighting) tank
• Suitable for Outdoor: The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that this paintball fill station adapter is very suitable for outdoor use
• 6000psi Fill Station: This paintball fill station adapter adopts the 6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank
• Convenient and Practical: This paintball fill station adapter with 24 inch long x 0.070 inch ID(DN2) micro-bore hose, whcih is easy to use

Product description

FZONE Aquarium CO2 Regulator Mini Series V3.0 Triple Stage with DC Solenoid and Bubble Counter Check Valve Compatible Paintball Tank CGA320 CO2 Cylinder

• DUAL STAGE DECOMPRESSION, PRESSURE ADJUSTABLE! This aquarium co2 regulator is the triple stage design, very stable output pressure and CO2 flowrate, cylinder inner pressure reduced, flowrate will not change. Working pressure can be adjusted from 0-60 psi.
• 12V DC SOLENOID WITH PRECISION NEEDLE VALVE! This co2 regulator use 12V DC solenoid valve repalced AC solenoid valve, safer and more stable, lower power, no noise. Automatic turning on/off CO2 output with timer. Aquarium specific needle valve, High precision fine-tuning easy for co2 to be 1 bubble in 3 seconds.
• BUBBLE COUNTER AND TOOLS INCLUDED! Together with bubble counter, you can read your co2 flow rate directly via the bubble counter. Bubble counter with check valve function, stop water backflow to bottle. All installing tools included, easy to install and use.
• CLASS 1 MANUFACTURING TECHNOLOGY! The co2 regulator is made of hard aluminum alloy, surface spraying treated. Pressure knob and fine tuning are very easy to adjust.
• MINI SIZE FOR ALMOST ALL TANKS! The regulator compatible with Painball tank, all size CGA320 threaded cylinder and 5/8'' UNF threaded disposable co2 cartridge.(Most 80-90g cartridges are 5/8'' UNF thread. Fluval 45g threaded 3/8'', NOT suitable,)

User questions & answers

Question:	Does it have a gauge for the CO2 tank pressure, or only 1 gauge for the output pressure
Answer:	I believe it would work for all preditors including black bear.
Question:	What’s the warranty on this
Answer:	No it does not.
Question:	The solenoid blinks once red when given power and no bubbles flow. Is the solenoid bad
Answer:	Yes, this will work with any of t ICOtec calls, as well as all other brands.
Question:	How do you attach the fluval 45g CO2 to this device? None of the seal rings make a difference
Answer:	If you have a GEN2 GC300 then yes. The original GC300 does not have a decoy or aux button on the remote.

Product features

Solid meterial used for long-term durability.

● Dual stage design, stable output pressure. avoid EOTP (end of tank dump).

● Output working pressure: 0 - 45 PSI adjustable. Fits any size aquarium

● High purity Aluminum body and stainless steel diaphragm for long-lasting durability and dependability.

● The regulator body is oxidation treated after sand blasting allow continuous usage without worrying about rust and dirty.

● Needle valve made of copper, easy to adjust your CO2 flowrate low to be 0.3bps.

OTS Mini DC 12V Solenoid Valve, High Performance, Cool Operating Temperature

● OTS 12V DC mini solenoid valve, safer than AC solenoid.

● Use with a timer, solenoid valve allows for CO2 to be switched on/off at defined times, e.g. to sync with the aquarium lighting.

● Red LED on/off indicator - the operation (on / off) of the solenoid valve can be confirmed by the red LED.

● Energy saving - low power consumption: 0.4 watt only. keeps the solenoid cool to the touch during operation.

● No noise - without buzzing or humming sound.

● High quality model - OST brand, special structure for long-lasting durability and dependability.

Precision rotatable needle valve for fine tuning release of CO2

● 360° swivel needle valves allow you to set up it on both horizontal and vertical cylinders. e.g. paintball tanks and CGA320 cylinders.

● Needle valve made of copper, easy to adjust your CO2 flowrate low to be 0.3bps.

● Bubble counter included. you can read your co2 flow rate. Bubble counter with check valve function, stop water backflow to bottle.

● Fits standard 4/6 mm ( 3/16" inner diameter ) CO2 proof tubing.

Product description

Every regulator is hand crafted and factory tested Non wrist digging, low profile design fill valve.Brass or optional Aluminum bonnet - see regulator parts for details, Comes with Plastic Thread Cap, Shim Pressure Adjustment,Completely rebuildable by the user, The regulator is light weight and easily re-buildable with a high air flow rate. Meets all DOT, CGA and ASTM specifications, Sonic Recharge Technology piston - plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down.

• 🐵Rated pressure for IN:3000psi - Out:800Psi Can fit most of your tanks with Thread:5/8"-18UNF, the outlet threads size is G1/2-14.
• 🙈Using for high pressure air cylinder, SCBA cylinder, SCUBA diving steel cylinder or PCP tanks,easy to assemble and install for Air / CO2 filling.
• 🙉Made of good quality materials, sturdy and durable, an economical high performance tank regulator. With a high air flow rate to make paintball shoot out with faster speed.
• 🙊Comes with standard 8mm quick disconnect male foster fitting adapter for filling.
• 🐒Exterior is dark black anodized aluminum with a black Aluminum thread protector and a rubber fill nipple cover. Regulators are supplied with a standard male foster fitting for filling.

User questions & answers

Question:	How do I adjust air flow rate? Which valve
Answer:	Yes, most Tippmann a5 threaded barrels will work
Question:	Which valve adjusts output pressure
Answer:	Don’t know but I get about 500-600 Shots in my paintball gun
Question:	Can this be purchased with 1800 PSI output
Answer:	Yea it is refillable as far as how much I’m not sure...
Question:	Can ninja shims be used to increase pressure
Answer:	Yes, it will

Product description

Interstate Pneumatics high quality aluminum CO2 cylinders with industry standard pin valves. DOT / TC Stamped. Safety Burst Disc Brass Pin Valve. The Valve is an American made valve with safety relief valve and blow off valve to protect from accidental discharge due to unscrewing valve (NEVER UNSCREW VALVE FROM CO2 CYLINDER). The cylinder is rated for 1800 PSI for DOT (Department of Transport) for use in the United States and TC (Transport Canada) for use in Canada. These cylinders are shipped empty as required by federal law, but are ready to fill. They have a current HYDRO test. Can be used for Paintball and other applications, including dispensing beer or soda. For Beer and Soda applications correct pin valve style regulator is required -- Certifications: US DOT Certification, Transport Canada Certification, SGS Certification (for Beverage Use). Warning: CO2 can cause injury (suffocation and Asphyxiation) or death, ventilate the area before entering. CO2 is stored at very high pressure and a liquid CO2 is at cryogenic temperatures which can cause injury, burn, explosion, or death. CO2 should be handled by a trained professional and extreme caution should be taken when dealing with CO2. For safety always wear protective gear. 20 Oz & 24 Oz Tank 2 Pack Kit. Note: This item does not ship with CO2 inside. It ships empty. You will need to take the tank to get it filled before use. If the tank leaks once you fill it the fill site will be able to determine if the burst disc needs replaced. Note: These cylinders have inside protection cover of "Phosphate Filming Acid" which means these are good to use for beverages.

• 20 Oz. CO2 Pin Valve Cylinder Tank Paintball.
• 10 Pack
• G 1/2-14 Threads with O-Ring
• Valve is made of LEAD-FREE brass

User questions & answers

Question:	What is the stamp date on the tanks
Answer:	My son who is 14 does not have a problem turning it unlike the one have which can be difficult.
Question:	are they shipped full
Answer:	That is the theory. I placed mine between my Tippman and the air tank with the valve closed. This was to make my marker easier access when needed quickly. When needed, I just twist the knob, rack the first ball into the chamber and rock and roll.
Question:	Do these tanks work on Tippmann markers
Answer:	This is made for paintball NPT ASA it will fit any paintball tank if your trying to use it for something else i would not it has a built in back check that will not serve you