14 best low pressure paintball tanks
Low-pressure paintball tanks are an essential component of paintball markers or guns, designed to store and regulate the air or gas used to propel paintballs. These tanks are related to the Paintball, Airsoft Paintball, and Sports Outdoors categories. Here's what you need to know about low-pressure paintball tanks:
Purpose: Low-pressure paintball tanks store and supply the compressed air or CO2 needed to power a paintball marker. They ensure a consistent and controlled release of air to propel the paintball accurately.
Low-Pressure vs. High-Pressure: Paintball tanks come in two main pressure categories: low-pressure and high-pressure. Low-pressure tanks typically operate at pressures below 450 psi (pounds per square inch), while high-pressure tanks operate at higher pressures, often around 800-850 psi.
Regulation: Low-pressure tanks are equipped with regulators that reduce the high-pressure air from the tank to the lower, consistent pressure required by the paintball marker. This regulation ensures the marker functions properly and prevents damage caused by excessive pressure.
Air Source Options: Low-pressure paintball tanks can be powered by either compressed air or CO2. Compressed air is a popular choice for serious players as it provides more consistent performance, while CO2 is often used by beginners due to its affordability.
Tank Material: Paintball tanks are typically made from lightweight and durable materials such as aluminum or carbon fiber. Carbon fiber tanks are known for being lighter and holding more air but tend to be more expensive.
Tank Sizes: Paintball tanks come in various sizes, typically measured in cubic inches (ci) or liters (L). Common sizes range from 45 ci to 68 ci, with larger tanks providing more shots per fill.
Tank Output Pressure: The output pressure of a low-pressure tank is adjusted using the tank's regulator to match the requirements of the specific paintball marker. This ensures the marker operates optimally and prevents damage to internal components.
Tank Maintenance: Proper maintenance of low-pressure paintball tanks is crucial for their longevity and safety. Tanks should be inspected regularly for damage, and the regulator seals should be replaced when worn.
Safety Considerations: Paintball tanks, whether low-pressure or high-pressure, should be handled with care. They should be stored in a cool, dry place, and the user should follow safety guidelines to prevent accidents.
Compliance with Regulations: Paintball tanks must meet safety and quality standards set by regulatory bodies to ensure their safe use in paintball games and sports.
Low-pressure paintball tanks are an integral part of the paintball experience, contributing to the accuracy and consistency of shots fired from paintball markers.Choosing the right tank size, material, and type of gas is important for optimizing your paintball game and ensuring a positive experience on the field.
Below you can find our editor's choice of the best low pressure paintball tanks on the market
Ninja Carbon Fiber HPA Tank - 68/4500 LITE - Adjustable Reg - Grey
Ninja
Product description
Ninja Paintball Carbon Fiber 68/4500 Compressed Air HPA Tank is made in the USA and is ideal for tournament style play as well as scenario type play. The SRT piston produces an industry leading recharge rate and virtually eliminates reg shoot down. Every regulator is hand crafted and factory tested and is rebuildable by the user.
Features:
* MADE IN THE USA
* Ultra Lightweight Carbon Fiber 68/4500 HPA Compressed Air Tank
* Adjustable regulator from Low, Medium, or High Pressure
* SRT piston - Sonic Recharge Technology piston - plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down
* SPA - Shim Pressure Adjustment- change output pressure by adding or removing shims, not springs or pistons
* MFV - Mini Fill Valve - Non wrist digging, low profile design fill valve
* Meets all DOT, CGA and ASTM specifications
* Completely rebuildable by the end user
* Every regulator is hand crafted and factory tested
* Super low response curve 0-50 psi from full to empty
* ASTM COMPLIANT bonnet thread
* ASTM COMPLIANT DOT burst disc
* ASTM COMPLIANT Low pressure burst disk
* ASTM COMPLIANT Restrictor, bleed hole and safety groove
* Mini Fill Valve IS hardened, plated 5000 psi rated
* Reg installed to ASTM specifications
* 68 cubic inch 4500 psi
* D.O.T. approved Carbon fiber bottle
* 5 year hydro
* Gives you ~1200 shots per fill depending on marker
* Shipped EMPTY. Must Be Filled Prior to Use.
- Ninja Paintball 68ci 4500psi Ultra Lightweight Carbon Fiber Compressed Air HPA Paintball Tank
- Adjustable regulator from Low, Medium, or High Pressure
- 5 Year Hydro
- Meets all DOT, CGA and ASTM specifications
- MADE IN THE USA!
User questions & answers
| Question: | What kind of reg is on this tank |
| Answer: | No. You'll have to custom order a tank from Ninja with that high an output. |
Tippmann Empire Basics 48ci 3K Paintball Tank- New 2019 Upgraded Version - Globally Certified
Tippmann
Product description
A perfect tank for any paintball marker that operates on High Pressure Air. This Empire Paintball 48cu/3000 PSI tank is Made In The USA. Features: * Lightweight Aluminum DOT and TC certified cylinders "Made in the USA" * 3000 PSI fill capacity with an 800 PSI output pressure * User replaceable Bonnet
- Lightweight Aluminum DOT and TC certified cylinders "Made in the USA"
- 3000 PSI fill capacity with an 800 PSI output pressure
- User replaceable Bonnet
User questions & answers
| Question: | Does the mad dog remote coil work with this because mine is not doing anything when I hook it up not even wen I press nipple on top |
| Answer: | What I did was, instead of pushing the straw into the cone attachment, I pushed the straw *out* of the cone attachment, then attached the merged units onto the duster. Hope that helps. |
| Question: | What connectors does this use? For refill and for output |
| Answer: | No, it is not ESD safe, but can be used if careful. The material is plastic which is an insulator that holds a charge. We are talking potentially thousands of volts! Keep the nozzles at least a few inches away from the motherboard or any electronics, spray from a distance, this is a powerful blower so it still works great. Never use the brushes on anything internal, only use them on case exterior, keyboard, etc. |
| Question: | Am I going to die if I put this on a mini gs |
| Answer: | The amount of pressure is very close to canned air, just a bit less than a full can of air. There is no build up limit, the power reaches 100% upon flipping the "On" switch. There are 2 speeds. |
| Question: | Does it use compressed air |
| Answer: | No you don’t need to remove the fans. They need to be blown out also. Just make sure you unplug the power before blowing it out. |
TRINITY air Compressor Adapter for Low Pressure Paintball Marker Paintballing woodsball Paintballer Compress air Adapter PSP Tournament Marker dye Planet Eclipse Invert Mini gs Invert Axe air Tester.
Trinity
Product description
Air Compressor Adapter For Low Pressure Paintball marker. Now you can test you low pressure paintball gun at home, save money on tank refills. Works on any home air compressor with standard air nipple hose fitting. This is the standard male to quick disconnect adapter used with Air Compressors. Perfect for multiple guns so you don't need to keep removing and installing this adapter into different guns when you want to switch out. Paintball 1/8" female NPT to male threaded ASA adapter Aluminum fitting Terms: NPT (National Pipe Thread) ASA (Air Source Adapter) CA (Constant Air) It has the same threading as a CGA 320 Valve on Paintball Air Tanks - like a 48ci, 68ci etc. Works great an low pressure markers, like Empire, Eclipse and DYE markers.
- Fast Shipping anywhere in USA
- Easy Installation
- Allows to use a standard home air compressor in your paintball gun. (repairs and test only purposes)
- Save money in refills and trips to the store, you can test and repair your gun at home with out waisting air from your air tank.
- Paintball 1/8" female NPT to male threaded ASA adapter Aluminum fitting
User questions & answers
| Question: | What is the maximum pressure for it |
| Answer: | It attaches at the side of chest. |
| Question: | Will a tippman tmc work with this |
| Answer: | I use the Polar HR monitor-bike computer where it mounts just like the original Polar. |
| Question: | Can i use this for at home target practice w/o filling hpa tanks for etha |
| Answer: | Hi, I don't know ploar Axn500 but what i can tell you is that i used this strap with Polar H6 heart rate monitor which is bluetooth and it works. Hope it helps. Regards, Leon |
| Question: | Is this for hooking the air compressor directly to the marker? Or is it for refilling the tank |
| Answer: | Don’t purchase this. You’ll waste your time and money. |
HK Army Aerolite Carbon Fiber HPA Paintball Tank Air System - 68ci / 4500psi (Clear Carbon)
HK Army
Product description
The HK Army AeroLite Compressed Air HPA Paintball Tank System has been developed with performance and affordability in mind. The comprehensive system pairs a lite-weight carbon fiber bottle and a reliable aluminum regulator with an output pressure of 800 psi. The AeroLite system includes a 5-year hydro cycle.
Features:
* 68 Cubic Inch Lightweight Bottle w/ 4500 psi Capacity
* Reliable Aircraft Grade Aluminum Regulator
* Weight 2lbs 2.4oz
* 800 psi Output Pressure
* DOT & TC Approved Cylinder
* 1.8K and 7.5K Burst Disks for Safety
* Five-Year Hydro Cycle
* Limited 90-Day MFG Warranty
- 68 Cubic Inch Lightweight Bottle w/ 4500 psi Capacity
- Reliable Aircraft Grade Aluminum Regulator
- Five-Year Hydro Cycle
- 800 psi Output Pressure
- DOT & TC Approved Cylinder
User questions & answers
| Question: | Does it fit any gun example empire axe |
| Answer: | yea it fits just about all paintball markers |
| Question: | Does this include the low pressure piston as well |
| Answer: | No, the regulator style on these tanks do not use different pressure pistons. The regulator you are thinking about is the Pro Reg that comes on the extra lite bottles. Those regs use a pistons to change out low and high pressure. |
| Question: | What is the typical cost difference for filling hpa vs co |
| Answer: | Black Ops fields charge $5 to fill hpa tanks. That’s about average industry wide for hpa. Co2 tanks usually cost 5-10$ to fill although there are less and less places offering C02 fills as hpa is talking over as a more efficient and commonly available system. We don’t offer c02 fills or tanks at any of our stores |
| Question: | Can this infate my PCP rifle to 3,300 psi |
| Answer: | Even though this tank has an internal pressure of 4500 PSI, the regulator that is included with this tank will cut off the output of the tank at 800 PSI. Assuming you have the adapters to connect this tank your your PCP rifle, this tank will fill your rifle to 800 PSI and then stop. If you are trying to get a higher output you would need a different regulator that allowed that output. |
Electric Air Pump, AGPtEK Portable Quick-Fill Air Pump with 3 Nozzles, 110V AC/12V DC, Perfect Inflator/Deflator Pumps for Outdoor Camping, Inflatable Cushions, Air Mattress Beds, Boats, Swimming Ring
AGPTEK
Product description
Package including
1 x AGPtek Electric Air Pump (US Standard)
1 x Car Power Adapter
1 x Home Power Adapter
3 x Universal Nozzle ( S, M, L )
1 x User Manual
- Powerful Electric Air Pump -- The AGPtek air pumps are so powerful that it can not only inflate items but also deflate products by sucking air out! Car power adapter and home power adapter are included, making it possible for indoor and outdoor use. ( NOTE: This air pump is not rechargeable and DO NOT FOR BALLOONS!!!!!! )
- 3 Nozzles to Choose -- We have 3 nozzles of different size in the electric air mattress pumps – S, M and L, allowing you to inflate/deflate different items in any occasions!
- Easy to Use -- The inflatable mattress pump is compatible with 12V DC and 110V AC power supply. To inflatable, just put the inflatable head at the filling hold, then press the switch. To deflate, you should put the inflatable head in the vent hole, then press the switch to deflate. Our electric air mattress pumps are simple to operate.
- Portable -- The inflatable mattress pump is small and lightweight, making it convenient to use it indoor and outdoor. At a travel-friendly dimension, you can easily take air pumps anywhere you go!
- Multi-Purpose -- Including car power adapter & home power adapter. This inflatable mattress pump is a powerful inflator and deflator for both indoor and outdoor use, especially for travel and outdoor activities. AGPtEK air pumps helps you saving time on inflating air cushions, air beds, air boats, inflatable furniture, swimming ring and more!
Product features
WARM TIPS
1. DO NOT use this air pumps for inflating high pressure products, such as tyres, basketball, balloons!
2. DO NOT use electric air mattress pumps continuously for more than 15 minutes.
Empire Paintball Basic Carbon Fiber Air System
Kee Action Sports
Product description
Empire Basic Air Systems offer an affordable option to the player who wants to upgrade to a High Pressure Air system. These high quality air systems feature an aluminum regulator that provides steady performance and reliability. With a five-year retest cycle, these Empire Basic tanks will operate for many years of quality performance.
- Proven regulator performance using Pure Energy Technology
- 48 Cubic Inch at 4500 psi
- Standard 800 psi output pressure
- DOT approved cylinder
- Aircraft grade aluminum construction regulator
User questions & answers
| Question: | Do you have to have all new items |
| Answer: | For paintball? |
| Question: | What is the date on the tank |
| Answer: | Purchased mine 06/2018 and the date on mine is 04/2017.... |
| Question: | Is this the little tank not the regular size |
| Answer: | No, the tank is quite big, definitely regular size, it was a great buy! The tank without the black top is 9 inches long, total length about 11 inches, and about 4 inches wide. Hope that helps! |
| Question: | Does this come with a fill nipple cover |
| Answer: | They do not. |
VaVoger Air Compressor Adapter Hose Fitting for Low Pressure Paintball Markers Testing
VaVoger
- 1/4" Industrial Coupler Plug with 1/4" Male NPT (M style) , ASA (Air Source Adapter) CA (Constant Air) It has the same threading as a CGA320 Valve on Paintball Air Tanks - like a 48ci, 68ci air tanks.
- Works great an low pressure markers, like Empire, Eclipse, DYE, Bob Long, Proto and some Dangerous Power models.
- Works on any home air compressor with standard 1/4" air nipple hose fitting. This is the standard male to quick disconnect adapter used with Air Compressors.
- Now you can test you low pressure paintball gun at home, save money on air tank refills.
Action Village 20oz CO2 Paintball Tank - Black Aluminum
Action Village
Product description
Action Village makes the most reliable and dependable CO2 tanks on the market. Order a trusted brand that has been making paintball tanks for over 30 Years.
- Action Village makes the most reliable and dependable CO2 tanks on the market. Order a trusted brand that has been making paintball tanks for over 30 Years.
- Manufactured at one of the world leading tank vendors.
- Get Roughly 1000+ shots of most paintball guns on the market.
- Compatible with ALL Paintball guns that are allowed to be run on CO2. Includes most paintball guns from Tippmann, Kingman, Spyder and Azodin.
User questions & answers
| Question: | What is the diameter |
| Answer: | Hi,There are two on/off valves in our product, one is to control co2 from the large cylinder into the small cylinder, and the other is to release the excess gas after filling. |
| Question: | Are these prefilled or do they ship empty |
| Answer: | The hose's work pressure is 1500 PSI and the gauge is 3000 PSI. |
| Question: | Are these refillable |
| Answer: | Make sure the CO2 cylinder is all the way in the off position. Use teflon tape, the thicker kind used for gas installation ls is better. After you have the assembly installed make sure both ball valves are in the off position, 90 degree position from the assembly, and SLOWLY open the cylinder valve. If there are no leaks close the cylinder valve, attach a SodaStream cylinder but don't screw the bronze colored not down. Now open the ball valve closest to the CO2 cylinder and check for leaks if no leaks you are good to go. |
| Question: | Do the tanks have expiration date |
| Answer: | Hi, Dear customer, Thread for large CO2 tank is CGA320 G1/2-14 and the fits soda stream tank thread is TR21-4.Please confirm that Big CO2 tank (donor cylinder) should have enough pressure, if it is liquid CO2, invert the big tank to inflate.Any other question,please feel free to contact us. Sincerely |
HK Army Aluminum HPA Tank - 13/3000
HK Army
Product description
Refillable HK ARMY 13/3000 Aluminum Compressed Air HPA Tank is the perfect lightweight tank for your paintball marker! This is a non-SLP paintball style tank with 800 PSI output. Regulator is compact measuring 61mm from tank top base to end of threaded top. Tank is very light, compact, and easy to store. The 13ci 3000psi HPA tanks gives the look and performance of a high-end tank without the price tag. Regulators are individually hand assembled and tested on state of the art machines for outstanding quality and assurance.
Features:
* 13/3000psi Lightweight Aluminum Bottle
* 800 PSI output (adjustable with optional HPA regulator)
* Low-profile fill nipples and burst disks
* Includes rubber nipple cover for added protection
* Compact pressure gauge
* Tri-Label UN ISO Certification Universal Acceptance
* Dual Burst Discs for added Safety
* 5 Year Hydro stamp
* Flat bottom for storage upright or on tables
* Tank measures 2 inches diameter x 9 7/8 inches tall (including regulator)
- 13/3000psi Lightweight Aluminum Bottle
- 800 PSI output (adjustable with optional HPA regulator)
- Includes rubber nipple cover for added protection
- 5 Year Hydro stamp
- Flat bottom for storage upright or on tables
User questions & answers
| Question: | Is this a CO2 tank |
| Answer: | Hello. Unfortunately we don't sell the reg-neck-to-bottle o-rings separately at this time. Only in this kit. |
| Question: | Does it need to be hydro tested since its a small tank |
| Answer: | Hello. Yes, any tank that accepts standard burst disks and fill nipples will work with these. |
| Question: | Does this come filled |
| Answer: | Hello. The burst disks in this kit are Captain O-Ring branded burst disks. They will fit the stock regulator that came on your Valken Zero G tank, as it accepts standard 1/8" NPT burst disks. |
| Question: | La botella viene de 22CI |
| Answer: | Yes, this kit is compatible with all tanks that use standard 1/8" NPT ports for fill nipples and burst disks. It is not compatible with tanks regulators that use low profile burst disks such as those made by Guerrilla Air. |
IORMAN Paintball CO2 Tank Compressed Air DIN Valve Gauge & Fill Station, 300bar/4500psi High Pressure, 8mm Quick Disconnect Adapter, 24" Charging Hose for PCP Game (Red)
IORMAN
Product description
Product Description
- Filling station with max to 40mpa pressure gauge, included the O-rings apron attached.
- Stainless Steel Regulator Valve Gauge that comes with International Standard connecting thread-M18.
- High pressure input regulator valve one-way safety valve readings up to 4500psi
- It is most economical high performance tank regulator large numbers and red, yellow and read indicators for easy monitoring.
- Carbon fiber bottle to vial standard filling system.
- Use the seismic pressure gauge, accurate standard, quality and durability.
Product Featuers
- Import working pressure: 20-30mpa / 200-300bar.
- Import connection thread: M18x1.5-6H.
- Export link thread: Standard 8mm quick disconnect adaptor.
- Connection: Filling hose with 8mm female quick disconnect adapter.
- Built Material: Stainless Steel body, hose with spring protection wire.
- Safety: Explosion-proof screw ensure safe filling.
Product Packing List
1x M18x1.5-6H Regulator
1x 8MM Quick Disconnect Hose
Note:
Please double check the thread size when you purchase, avoid unnecessary misunderstandings.
- Integrated DIN valve male thread size is M18x1.5-6H, Working pressure: 20-30 Mpa / 200-300 Bar / 3000-4500 PSI.
- High Pressure Hose: 57mm lenght stainless steel spring protector hose, 8mm dual quick-disconnect female converter.
- Carbon fiber tank to vial standard adapter system, 8mm quick disconnect male output directly into air cylinder, with standard high pressure port and quick refilling.
- Material: Stainless steel, Style: High pressure output regulator valve with pressure gauge, can be used with DIN connector.
- Need to compatible with threads of valves, using for high pressure air cylinder, SCBA cylinder, SCUBA diving steel cylinder or PCP tanks,easy to assemble and install for Air / CO2 filling.
User questions & answers
| Question: | is this a 300 Din valve |
| Answer: | Yes. |
| Question: | Which regulator fits the 6.8l tank 7/8 thread |
| Answer: | Here it is. https://www.amazon.com/dp/B0798LSYFR?ref=myi_title_dp |
| Question: | where can I get the safety pop off valve discs? Mine ruptured at 4000lbs and released the air. Needs to be replaced |
| Answer: | Search for Captain O-ring HPA burst discs. I’d go with the 5k version personally. They’re about $8.00 bucks for 2..... |
| Question: | Will this fill our small CO2 canisters for the paint ball guns |
| Answer: | Yes, it will. |
Captain O-Ring Deluxe Remote Line for Paintball Air Tanks
Captain O-Ring LLC
Product description
Get the weight of your tank off of your marker with the Captain O-Ring Deluxe Remote Line. Rated up to 4,500 psi, this remote is compatible with all paintball HPA tanks as well as CO2 tanks. The remote is coiled at a 30" length, but can stretch over 48" for extended maneuverability. Constructed of heavy duty coiled air hose and high quality fittings, the Captain O-Ring Deluxe Remote Line is built to last.
Includes a one year warranty against defect by Captain O-Ring. "Captain O-Ring" is a registered trademark of Captain O-Ring LLC.
- Rated up to 4500 psi
- Universal fit makes this remote compatible with all markers
- Quick disconnect to ASA adapter included
- 30" Unstretched Length, can be stretched to over four feet.
- Includes one year warranty by Captain O-Ring LLC
User questions & answers
| Question: | Will this fit my spyder shutter |
| Answer: | Standard Ninja |
| Question: | Can you use this to fill up a paintball gun with a actual air compressor |
| Answer: | Yes, this will work on all paintball markers. |
| Question: | Will this fit an hk armory tank |
| Answer: | No. I have filled at 4 different field locations. I also use a standard fill whip. Connects just fine |
| Question: | Hello. does the female connection fit a 90 gram co2 cylinder, such as the jt? thanks |
| Answer: | I am not sure, but I had some questions Amazon couldn't answer and they were very helpful to get me in touch with the company who sold the Ninja. He answered all my questions and was very helpful. Hats off to Amazon customer service and the Ninja company! |
Maddog Paintball Airsoft Fill Whip Hose Extension 4500 Psi PCP - 36 inch Stainless Steel Charging System
Maddog
Product description
Maddog Fill Whip Hose Extension enables fast easy fills! Fill your compressed air tank without having to remove it from your pack! 1/8Inch Quick Disconnect Male on one end, 1/8Inch Quick Disconnect Female on the other. These Fill Whips work in Paintball, PCP and any system with compressed air up to 4500psi.
Features:
* Fill your tank without having to remove it from your pack!
* Heavy Duty Stainless Steel
* 1/8Inch Quick Disconnect Male on one end
* 1/8Inch Quick Disconnect Female on the other
* Compatible with Compressed Air Tanks up to 4500 psi rated assembly
DOES NOT WORK WITH CO2!
- Fast, Easy Tank Re-Fills! Maddog's Fill Whip extends the line from your tank to the re-fill station so you can Re-fill without having to remove the tank from your pack!
- 36" Heavy Duty Stainless Steel Hose (End to End)
- 1/8Inch Quick Disconnect Male on one end, 1/8Inch Quick Disconnect Female on the other
- Compatible with Compressed Air Tanks up to 4500 psi rated assembly
- DOES NOT WORK WITH CO2 TANKS
User questions & answers
| Question: | Is a female quick connect adapter included |
| Answer: | This portable air pump is better for PCP airsoft or paintball, if you need to fill scuba tanks, we recommend them for you: https://www.amazon.com/dp/B01M4GE0LE; https://www.amazon.com/dp/B071VYL6PN; https://www.amazon.com/dp/B0719PHM8C. |
| Question: | Does this fit on an air compressor |
| Answer: | As an additional note, I have found the compressor gauge more accurate than the bottle gauge. As best I can tell, the bottle heats up which makes the pressure read higher than it will be in actual use. Once the bottle cools back down to ambient it's basically the same as the compressor pressure reading. |
| Question: | Are all the fixed fittings (including on the hose itself, not only the quick release) made of stainkess steel. i am interested to use it for scuba |
| Answer: | Hello,Thank you for your request. this unit come with a fill hose and filter. hope this answer can help you.Have a good day |
| Question: | can I put it on a bike pump |
| Answer: | It comes with a high pressure hose for tanks or PCP airsoft filling. |
HK Army Aerolite Carbon Fiber HPA Paintball Tank Air System - 68ci / 4500psi (Smoke)
HK Army
Product description
The HK Army AeroLite Compressed Air HPA Paintball Tank System has been developed with performance and affordability in mind. The comprehensive system pairs a lite-weight carbon fiber bottle and a reliable aluminum regulator with an output pressure of 800 psi. The AeroLite system includes a 5-year hydro cycle.
Features:
* 68 Cubic Inch Lightweight Bottle w/ 4500 psi Capacity
* Reliable Aircraft Grade Aluminum Regulator
* Weight 2lbs 2.4oz
* 800 psi Output Pressure
* DOT & TC Approved Cylinder
* 1.8K and 7.5K Burst Disks for Safety
* Five-Year Hydro Cycle
* Limited 90-Day MFG Warranty
- 68 Cubic Inch Lightweight Bottle w/ 4500 psi Capacity
- Reliable Aircraft Grade Aluminum Regulator
- Five-Year Hydro Cycle
- 800 psi Output Pressure
- DOT & TC Approved Cylinder
User questions & answers
| Question: | Can I fill my pcp air rifle to 3000 psi with this |
| Answer: | Just Flag |
| Question: | can i use this for etha |
| Answer: | It Definitely comes with the American flag. I can’t remember about the swat but my son said yes. |
| Question: | Can i use this to fill my pcp tanks? Do i just use my fill hose like on my hand pump |
| Answer: | Less than eight years old，thanks. |
| Question: | Do you have this bottle with a regulated 1200 psi output regulator |
| Answer: | no, only vest. |
Ninja Paintball 4500 PSI Carbon Fiber HPA Tanks w/ Regulator
Ninja Paintball
Product description
Ninja makes the best quality and most reliable High Pressure Air paintball systems in the world. This is their 4500 psi line of Carbon fiber HPA systems.
- MADE IN THE USA
- 4500 psi
- D.O.T. and T.C. approved carbon fiber bottle
- 5 Year Hydro
- Default output of 800 PSI to work out of the box with all Paintball Guns
User questions & answers
| Question: | Can you use this to fill pcp rifles |
| Answer: | The diameter of the bottle is 3 1/8 or 3.125 inches. |
| Question: | How can I adjust it |
| Answer: | Shipped Empty |
| Question: | What exactly is different between a carbon fiber tank and an aluminum tank |
| Answer: | Yes |
| Question: | How do i regulate it to 3000 psi output |
| Answer: | I don’t see an expiration date on them but a date they were made 10/20. They come empty and have to be filled. When we got them filled they said they cannot fill tanks that are older than 5 years old so I would assume they expire in 10/2025. |
Latest Reviews
View all
Underarm Pads
- Updated: 09.01.2023
- Read reviews
Lumbar Support Office Chair
- Updated: 23.03.2023
- Read reviews
Apple Golf Clubs
- Updated: 04.05.2023
- Read reviews
Dha For Teens
- Updated: 08.07.2023
- Read reviews
Cases With Diffusers
- Updated: 25.06.2023
- Read reviews