13 best paintball fill stations

Product description

Re-fill standard paintball tanks for 12oz, 16oz, 20oz, 24oz, etc. W/ease. MAddog paintball Co2 fill station, Co2 dual valve bottle refill station offers 2 quick release valves prevent fumbling around or over filling. Heavy duty, durable construction, compatible with all standard Co2 paintball tanks on the market. Save time, fill from home.

• CO2 Dual Valve Paintball Tank Refill Station for 12oz, 16oz, 20oz, 24oz. Tanks etc.
• 40 Inch Stainless Steel Dual Braided Hose
• Heavy Duty Tank Connector + Dual 1/4 Turn Valves
• Heavy Duty Fill Valve w/ On/Off
• Compatible with All Standard US CO2 Paintball Tanks

User questions & answers

Question:	What is the thread size of the hose connected to it
Answer:	Both side
Question:	I plan on renting a tank and having it filled with Co2 for paintball. Does this need any extra gauges or fittings
Answer:	Yes
Question:	Can you use this on an air compressor
Answer:	with the use of an adapter. Otherwise no
Question:	How do i get my filler to fill soda stream tank
Answer:	Yes the fitting are already on the hose.

• Power: 110V 60HZ; Motor Power: 1.8KW; Charge pressure: 30MPA; Working Pressure: 300BAR 30MPA 4500PSI. Air pump inflating speed: 2800r/min; Work flow: 50L/min; Oil standard: IS0 VG 46 & AW 46.
• WIDE APPLICATION: A perfect electric air pump for car tires, bike tires, scuba tanks, fire fighting, paintball, air pistols, leakage detecting, pressure-tight tests, automobiles, bicycles, air impermeability tests, pressure-proof tests, etc.
• QUICK-FILL PERFORMANCE: It takes only 30 minutes to fill a 6.8L tank to 300BAR. Designed with two-stage compression and two water-oil separators for performance stability.
• COOLING SYSTEM: For smooth performance, you have to prepare cooling water and replace it every 30 minutes for an optimal cooling effect. NEVER START THE MACHINE BEFORE YOU HAVE ENOUGH WATER PREPARED.
• ATTENTION: The compressed air pump will NOT automatically stop when the pressure reaches 300BAR/30MPA. You have to turn it off manually!

User questions & answers

Question:	Does this come with an oil and water separator or do you need to attach an external one
Answer:	Not thsi tank, the output is around 800-850 psi... You will need a tank with a regulator that has 3000 psi out put. Ninja makes a setup for that. The reg is called an X-Pressure reg and comes preset at 3000 psi.
Question:	What oil does it use
Answer:	Yes
Question:	Are there any orion parts dealers or mfg. reps in the us or even china that have an email address
Answer:	Yes you should be able to. As long as you have a compressor to fill the tank correctly. With the correct hose that connects to the tank. 4500 psi
Question:	Is there a bleed off
Answer:	We have tanks with regulators that have and available 1150 psi out put

Product features

Cylinder Head

Stainless steel air cylinder with aluminum coating enables a long lifespan. To prevent the cylinder head from overheating, please change the cooling water every 30 minutes.

Precise Gauge

This PCP compressor can pump your scuba or tank to 4500psi / 30Mpa. Remember to shut down the machine when the pressure reaches 4500psi / 30Mpa. YOU HAVE TO STOP THE MACHINE MANUALLY.

Oil Level

Please make sure to use the ISO VG46 & AW46 standard oil. Regularly ensure the engine oil level stays above the red dot and change the oil if it discolors.

Operation Notes:

1. USE PROPER POWER SUPPLY: Make sure to connect this to a socket that can take over 8A electric current, or the circuit may be damaged.
2. OIL REQUIRED: Fill it up with proper oil before using it. Compatible oil: ISO VG46 & AW46 oil (NOT included）.
3. COOLING WATER REQUIRED: Never start the pump before you have enough cooling water prepared. To prevent overheating, please change the water every 30 minutes.
4. COOLDOWN: Overworking (Over 30 minutes) or overheating (over 176°F) will lead to an automatic shut-off. If that happens, stop the item for a while and let it cool down.
5. KEEP AN EYE ON THE OIL: Make sure the oil level stays above the red dot. Replace the oil if the color changes.
6. TURN IT OFF MANUALLY: The item won’t stop automatically when the pressure reaches 30MPA/300BAR. YOU HAVE TO TURN IT OFF MANUALLY.
7. Do not touch the hot cylinder head right after it stops working.
8. Never use this in a humid environment or near flammable material. Keep it out of children’s reach.

Specifications

• Voltage: 110V
• Power: 1.80KW
• Working Pressure: 300BAR / 30MPA/ 4500PSI
• Working Capability: 50 L / min
• Inflating Speed: 2800 r / min
• Weight: 44.1 lb.
• Filling Time: 1L/ 10 minutes
• Cooling System: Water
• Oil Standard: ISO VG46 & AW46

Package List

• 1 x Air Compressor Pump
• 2 x Main Machines
• 1 x Hose Female
• 1 x Water Pump
• 1 x Water Cooling Pump
• 2 x Pressure Relief Screw
• 1 x Certification
• 1 x Spare Part
• 1 x Bag
• 1 x Separator
• 2 x Power Cables (110V)

• DURABLE WITH SMOOTH MOITION, sleek stainless steel construction brings smooth upward and downwards motion; 8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear.
• HIGH PRESSURE WITH SAFETY, high pressure goes up to 4500psi; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7” flexible micro-bore hose can bear up to 80MPA pressure, safeguarding your safety with superior quality.
• WIDE APPLICATIONS, compatible with most PCP pistols, rifles and air guns.
• USER-FRIENDLY DESIGNS, built-in oil and water separator for convenient operation; TPR padded grips for fatigue-free hand feelings, large gauge provides easy-to-read parameters.
• COMPACT & FOLDABLE FOR EASY STORAGE, 4mm detachable & foldable pedal for easy storage and transport, perfect to carry it around in your vehicle for unexpected use.

User questions & answers

Question:	Can I fill the 425cc bottle of my Kral rifle with this pump
Answer:	Sure if the unit has a fitting for your airgun. May take longer depending on the size of the tank. Not familiar with that airgun but it should work as long as you follow the pressure limitations!
Question:	Does it work with the crosman bpwf17 wildfire pcp powered multi-shot semi-auto air rifle,0.177 caliber
Answer:	It uses a standard foster connector. Hooked right up to my Air Force.
Question:	Should pump work on Benjamin Marauder out of the box? I can't get air to flow into the gun, and a rubber seal keeps popping out of the gauge housing
Answer:	Tighten the large nuts on the pump and pump slow and steady. If it doesn't work contact the seller, they are good to deal with in my experience.
Question:	can u fill a 20oz paint ball tank with it
Answer:	The answer below you is wrong I am doing the same thing for my HPA gun (runs off a standard 4500psi paintball tank) you can fill it as long as you ofc are actually wanting to fill with c02 which would usually be a cartridge but if you are filling a regular old paintball tank with air this will do the trick without having to drop $$$$$ on a high psi compressor.

Product features

Specification:

• Pump Chamber: 3-Stage
• Max Pressure: 4500psi/310bar
• Weight: 7.7 lbs
• Hose Length: 19.7" (50 cm)
• Handle Total Width: 10.6" (25 cm)
• Overall Height: 24.7" (62cm)

Before Using:

Make sure the tightness before using. Check the tightness between soft tube and air base. Make sure the high tightness between the connector and tire to avoid leaking. Inflating 30 times to lubricate the inner wall of air pump. Tighten the pump body with base.

Note:

Make sure the valve is tightly screwed before using the pump. Use some oil if there is any air leakage. (Oil NOT included)

Product description

Product description

Gurlleu universal paintball UFA fill adapter, for using with CO2 fill stations, or remote coilsIdeal for your gear bagLets you release air from any paintball tank,most commonly seen on remotes and fill stations.

Product specification

Working pressure: 3000psi

Output thread: 1/8 NPT

Input thread: G1/2-14.

Material: Hard Alloy

• Max to 3000psi working pressure.
• 1/8 inch NPT female side hole threaded with 8mm quick plug and gauge
• G1/2-14 ( 0.825-14NGO ) female bottom threaded, screws onto any depressed pin valves
• Heavy duty aluminum construction, lightweight and durable design, corrosion resistant.
• Paintball UFA fill adapter On/Off, perfect for remote systems or CO2 fill stations, release air from cylinders.

User questions & answers

Question:	Is it smart to use this to fill co2 tanks with compressed air
Answer:	No. CO2 cylinders are not rated for the same high pressure that compressed air cylinders are rated for. CO2 cylinders are rated for a maximum pressure of 860 psi and compressed air cylinders can be rated at 3000 psi and higher. Even if you use a CO2 cylinder and fill it to no more than 860 psi you will not get the same kind of volume out of it because at 860 psi the carbon dioxide is a liquid inside the cylinder and air is still a gas. Both will expand but the expansion ratio for CO2 is about 535 to 1 and this is much higher than the air.
Question:	Can i use this just to check the current pressure on my 12oz co2 tanks? would i need something else? thanks
Answer:	Are those tankst threaded and refillable ? If not . tben no .
Question:	Does this have a bleeder to release pressure in the line
Answer:	It does not have a bleeder valve to release the line pressure, but it will let you empty out whatever it is you’re filling, an air bottle in my case. My compressor and hand pump have bleeder valves and I bleed the line that way.
Question:	Does the gauge read from the tank side or the npt-threaded side of the adapter? In other words, with the valve closed will it read the input pressure
Answer:	Have mine set up for PCP rifle to check output of regulator on tank. Mine has a slide to bleed air out of tank if need be and gauge is attached to that. With valve open it should read tank pressure. With valve closed it will read input pressure from npt if it's greater then the pressure that's trapped inside the valve from tank. Will upload pic of my setup with slide to bleed out air in tank and valve b4 removal as to not blow out oring off bottle. Makes taking valve off easy since there is no pressure.

• SMOOTH DESIGN: This paintball fill station Knob type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long service time.
• 45MM DIAMETER: The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use.
• UNIQUE DESIGN: 6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank.
• APPLY FOR: Easy to install and use. The paintball charging adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints.
• EASY TO READ: This paintball charging adapter inflators are designed for convenience and reliability. Easy to read pressure gauge, durable fittings.

User questions & answers

Question:	Where can I find the orange male o-rings for this item
Answer:	Rheinisch-Westfälischen Sprengstoff-Fabriken
Question:	Can I refill tank off of a air compressor with this
Answer:	That is what I use it for. I shoot a AF Condor in .22, has worked well.
Question:	They come with 2 orange O-rings what size the orings ? Where to buy for replace it
Answer:	Its best to use on the tip of the new CO2 cartridge only. Use regular gun oil to wipe off and protect finish of exterior. Never put gun oil on the CO2 cartridge.
Question:	What are the threads per inch on the gauge and the filler hose that we would buy from this listing?metric or sae?looks like there is some discrepancy
Answer:	The lube itself doesn't deteriorate. Keep it in the dark and the bottle won't either. I do three drops down the compression cylinder every 500 shots in my ancient leather washer Diana 45 and after 40 years' shooting, I'm still wondering if its performance is ever going to diminish enough to merit overhaul. On a spring gun, let it sit muzzle up a few minutes before working the piston up and down five or six times. Then stand the gun on its muzzle for an hour. Your next two or three shots will always smell of ignited oil, but that will pass. By your tenth round,my our velocities will settle into the normal range. A bottle will last you a very long time, even if you're shooting silhouette.

Product features

Specification

• Material: Sainless Steel
• Color: Silver
• Whole Length: Approx. 80cm/31.5in
• Weight: Approx. 560g

SMOOTH DESIGN

This paintball fill station Knob type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long use time.

45MM DIAMETER

The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use.

UNIQUE DESIGN

6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank.

Product description

Turn your scuba tank into a Paintball Tank Refill Station! Refill paintball tank after paintball tank. Fill high pressure nitrogen / compressed air tanks from your scuba tank. Fill station is complete with tension knobs, quick disconnect and a seal ring. Simply attach the Paintball Scuba Fill Station to your scuba tank and start filling. Compatible w/ Standard Scuba K-Valve, J-Valve and H-Valves. Created to make filling paintball tanks fast and easy! Features: * Built for paintball * Compatible w/ Standard Scuba K-Valve, J-Valve and H-Valves * Female quick-disconnect * Tank Pressure Gauge + Bleed Valve * Compatible with all standard 3000psi and 4500 psi paintball tanks

• Refill your Paintball Tank from home! Maddog Scuba Re-Fill Station Built For Paintball
• Compatible w/ Standard Scuba K-Valve, J-Valve and H-Valves
• Compatible with all standard 3000psi and 4500 psi paintball tanks
• Tank Pressure Gauge + Bleed Valve
• Female quick-disconnect

User questions & answers

Question:	Can you use an air compressor instead of a scuba tank
Answer:	This oil contains a rust preventative. The gas spring is a nitrogen charged cylinder. I use these cylinders where I work for die cushions and this oil is good for the seals.
Question:	Does it have a hose
Answer:	it will not damage seals

• Standard SCUBA Yoke Adapter Pocket, compatible with standard K-Valve, J-Valve and H-Valve .
• 8mm standard female quick-disconnect coupling plug, 24 inch stainless steel spring protector hose.
• Can also work with PCP air rifles with compressed air from a scuba tank and fill paintball, HPA co2 tanks.
• New double o-rings design, longer service life, working pressure up to 4500 psi.
• Simply connect each fill adaptor to the male air tool fittings, female quick-disconnect coupling with precision bearing steel ball, high pressure resistance，this is one of the needed items to have in your parts kit.

User questions & answers

Question:	Is this everything i need to fill my pcp rifle
Answer:	One is .440 and other is .390. They are harder than a conventional rubber O ring. No clue where to get, maybe company that sold the valve?
Question:	Is there a check valve in the hose connection so air doesn't leak out? I just want to use it to check pressure in my tanks vs. hooking up my regulator
Answer:	The paintball charging adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints. The filler hose comes together, Goods same as picture showed.
Question:	can I fit this to a craftsmen 135 psi air compressor to fill paintball guns
Answer:	I haven't used pellgun oil, but they are described the same way. The purpose of both is to lubricate the internal seals and prevent rust in CO2 guns.Sounds like you can use either.
Question:	Scuba refill shop does not have fittings to refill my pcp air tank. What fitting do i need to make shop refill my pcp tank as if its a scuba tank
Answer:	I used it on Ruger 22 cal break barrel. Gas piston air rifle, not so much.

Product features

Charging System

High pressure charging system with valve gauge, easy to installation and operation.

Filling adaper

Aluminum alloy filling adapter, double o-rings design, longer service life.

Structure

Standard Scuba Yoke pocket, compatible with standard K-Valve, J-Valve and H-Valve .

Filling Hose

36" Long DN2 Mircrobore filling hose with quick disconnect

Pressure service

Working pressure - 4500 psi,

Gauge indicate pressure - 6000 psi

Thread fastening

Suitable size tightening nut and pressure relief button, convenient and stable

Standard

CE standards

Installation and Assembly

Main Uses

Widely for fire-fighting, scuba shop, snorkeling dive system, PCP rifle and Paintball tanks for filling

Product description

Product Description

- Filling station with max to 40mpa pressure gauge, included the O-rings apron attached.

- Stainless Steel Regulator Valve Gauge that comes with International Standard connecting thread-7/8"-14 UNF.

- High pressure input regulator valve one-way safety valve readings up to 4500psi

- It is most economical high performance tank regulator large numbers and red, yellow and read indicators for easy monitoring.

- Carbon fiber bottle to vial standard filling system.

- Use the seismic pressure gauge, accurate standard, quality and durability.

Product Featuers

- Import working pressure: 20-30mpa / 200-300bar.

- Import connection thread: 7/8"-14 UNF.

- Export link thread: Standard 8mm quick disconnect adaptor.

- Connection: Filling hose with 8mm female quick disconnect adapter.

- Built Material: Stainless Steel body, hose with spring protection wire.

- Safety: Explosion-proof screw ensure safe filling.

Product Packing List

1x 7/8"-14 UNF Regulator

1x 8MM Quick Disconnect Hose

Note:

Please double check the thread size when you purchase, avoid unnecessary misunderstandings.

• Interated valve male thread size is 7/8-14UFN, Working pressure: 20-30Mpa / 200-300Bar / 3000-4500psi, Burst disk: 5K / 5000psi.
• High Pressure Hose: 57mm lenght stainless steel spring protector hose, 8mm dual quick-disconnect female converter.
• Carbon fiber tank to vial standard adapter system, 8mm quick disconnect male output directly into air cylinder, with standard high pressure port and quick refilling.
• Material: Stainless steel, Style: High pressure output regulator valve with pressure gauge, can be used with DIN connector.
• Need to compatible with threads of valves, using for high pressure air cylinder, SCBA cylinder, SCUBA diving steel cylinder or PCP tanks,easy to assemble and install for Air / CO2 filling.

User questions & answers

Question:	What us the guage thread size
Answer:	It's probably 1/8 NPT. If not it's 1/8 BSP. It is definitely not 7/8 U.S. thread. The 7/8 thread is the gauge of the tank and valve attachment thread, not the gauge to the valve thread size.
Question:	What thread is being used for the pressure gauge? is it 1/8 bspp or 1/8 npt ? or is it 1/4 bspp or 1/4 npt? thanks
Answer:	I went to a hydraulic shop in Orlando and they couldn't find a thread size. It was a large shop and they were stumped. At those pressures I didn't want to risk a rupture so I sent the unit back
Question:	I have a 13ci tank and would like to know if this is the output regulator that I can use on my bigger tank to fill out my 13ci
Answer:	I have this valve on a 30min SCBA fireman’s carbon tank. I know there’s a few different threads depending on the bottle or tank you have. I did a few hours homework Online to find out that this valve would fit all 30,45 & 60 minute SCBA Carbon rescue tanks. I also had to change the O-ring on this valve to a 90-D and use some divers silicone grease to stop it from leaking. After that it worked great for filling my PCP rifles.
Question:	Whats the output pressure
Answer:	The output pressure is controlled by the valve, and readout is on the gauge

Product description

Paintball PCP Diving Cylinders Stainless Steel Fill Station DIN Fit G5/8 Charging Adapter 





Parameter:

Mede by Stainless steel.

Rate for 4500psi/300Bar Air-Tanks with DIN conections.

PCP Fill Station Fits standard DIN dive tank valve threads(G5/8-14).

Screw Knob vent or Pushbutton vent.

Pressure Gauge has 5000PSI and 350Bar can bechoosed.







 

• Mede by Stainless steel.
• Rate for 4500psi/300Bar Air-Tanks with DIN conections.
• Fits standard DIN dive tank valve threads(G5/8-14).
• Screw Knob vent or Pushbutton vent.
• Pressure Gauge has 5000PSI and 350Bar can bechoosed.

Product description

Designed by a paintball/airsoft enthusiast, the Vance Home Improvement Fill Whip Hose extension replaces the common refill hose. Designed so you can fill your tank without having to remove it from your pack.



Our Heavy Duty Stainless Steel hose is tested to not leak. Connects are designed to fit perfectly and remain air tight.



36” Hose (3 foot). ⅛ Inch Quick Disconnect Male on one end and ⅛ Inch Quick Disconnect Female on the other end. Compatible with Compressed Air Tanks up to 4500 psi rated assembly.

• ⚒ BUILT TO LAST: Our Refill Hose is made from 100% stainless steel. Every unit is trial tested to guarantee durability. Perfect extension to all hand pumps, high quality replacement to stock air pump hoses.
• ⚒ FAST & EASY: Refill your tank easily! Our fill whip extends the line from your tank to your refill station. Designed so you can refill without having to remove the tank from your pack.
• ⚒ SPECS: 36” Hose (3 foot). ⅛ Inch Quick Disconnect Male on one end and ⅛ Inch Quick Disconnect Female on the other end.
• ⚒ NO LEAKS: We guarantee that our quick connect ends are tight, and our stainless steel hose will never leak.
• ⚒ 4500 PSI: Works with Compressed Air up to 4500 Psi. It is not designed to work with CO2 Tanks.

Product description

How to use it:

1. Put the gasket into the connector, confirm whether the intake valve and release valve are closed, and turn the pin switch of the small cylinder adapter to the top.

2. Connect the large carbon dioxide tank.

3. Connect the small paintball co2 cylinder.

4. Turn the pin switch of the adapter to the bottom to fully open the cylinder valve.

5. Open the intake valve (the first valve from the large water tank, not the large water tank handwheel).

6. Easily open your big tank handwheel and listen to a little one. When you pinch it, open it a bit until it keeps open. Wait about 30-60 seconds until you hear no gas flow and filling can be completed.

7. After filling, turn the handwheel to stop the carbon dioxide.

8. Turn the pin switch to the top to isolate the paintball cylinder.

9. Open the escape valve to release residual gas.

10. Remove the small cylinder.

• Universally Fit- Standard CGA-320 adaptor fits most large co2 tanks,another G1/2 adaptor compatible with most standard US co2 paintball tanks,and allows normal operation without any permanent changes.
• Stainless Steel Material Support High Pressure- The 36 inch stainless steel braided hose support 6000 psi high pressure with spring protector,and the surface is polished plating, very strong and beautiful.
• Save Money on Refill- This system allows you to fill paintball co2 tanks from a larger co2 canister which has a CGA320 outlet valve.
• Wide Applications- It can connect a large CO2 tanks, like 5lb, 20lb or 50lb commercial CO2 tanks, can fill 12oz, 16oz, 20oz, co2 paintball tanks.Suitable for CGA-320 of these countries-United States, Canada, Brazil, Colombia, Philippines.

User questions & answers

Question:	Will this work on my 5a paintball gun
Answer:	Yes! I use a Yong Heng compressor to fill my SCBA tank. Use a double male quick connect to join the compressor hose to the tank connector hose.

Product description

60cm Hose 4500 PSI Paintball PCP DIN Fill Station Refill Charging Adapter G5/8

Specifications:

Material: Copper + Nylon

Color: Silver+Black

Outlet Thread:8mm

Interface Type:5/8 Quick Insertion

Measuring Range:0-4500(PSI)

60cm Microbore Hose

Features:

-Inflators are designed for convenience and reliability

-Easy to read pressure gauge

-Durable brass fittings

Packages:

1 x Refill Charging Adaptor

• 【SPECIFICATIONS】 - Outlet Thread:8mm;Interface Type:5/8 Quick Insertion;Measuring Range:0-4500(PSI);Material: Copper Nylon;Color: Silver Black;60cm Microbore Hose
• 【SMOOTH DESIGN】 - This paintball fill station type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long service time.
• 【EASY TO READ】 - This paintball charging adapter inflators are designed for convenience and reliability. Easy to read pressure gauge, durable brass fittings.
• 【UNIQUE DESIGN】 - 4500psi fill station designed for filling a paintball tank, or an air rifle.Small size and lightweight, easy to carry and store, convenient to use.
• 【100% SATISFIED SERVICE】 - US STOCK & FREE SHIPPING! FAST Delivery from our US warehouse(CA or NJ)! Wayclound is a professional team. If you have any questions about the product, please contact us. We will provide after-sales service 24 hours a day.

User questions & answers

Question:	I have a scuba tank yoke and I am looking for an adapter to fill pcp air rifles. Is this the correct adapter for the scuba yoke
Answer:	Take the back off the motor (2 screws) there is a switch. Push the switch to the 115 option.

• carbon fiber
• Imported
• Product Specification: 3L / 30 CF capacity, 30mpa / 4500psi service pressure, CE certified （Not DOT certified）, M18x1.5 screw thread size, integrated air filling system with regulator gauge hose fittings for input and output by quick disconnect.
• Product Structure: Using high-quality raw material AL6061 aluminum alloy liner with full-wrapped carbon fiber and glass fiber winding, external surface treatment is epoxy coated, high strength features creep resistance, shock resistance and corrosion resistance.
• Product Testing Performance: One of the safety tests is the hydrostatic test pressure, for carbon fiber cylinders, it can reach 50Mpa. The other is the minimum burst pressure, which can reach 102Mpa for carbon fiber cylinders, can hold more gas under the same volume conditions.
• Product Advantage: Carbon fiber composite air cylinder is a new material cylinder developed in recent years. Compared with the traditional steel cylinders, the weight is reduced by 70%, the corrosion resistance is strong, there is no magnetic property, the performance is stable, and the inner surface is specially treated to ensure that the holding gas is clean and has no odor, long service life (The service life is 15 years).
• Product Application: Loading gas, Emergency escape, Fire breathing, Underwater breathing, Lifesaving of ships, Clean energy, Snorkeling diving breathing, PCP rifle and Paintball filling, Medical care and Mine emergency etc. Widely for fire-fighting, chemical industry, shipping, laboratory, mine, pertroleum, warehouse, factory and metallurgy, it can be used in various positive pressure breathing apparatus.

User questions & answers

Question:	I got two same size O-rings with the valve, rubber and trflon ones. Which one goes where, and in what order? I didn't receive any instruction
Answer:	The way I did it was that I purchased a used scuba tank and the valve adapter. And now I can fill my own PCP tank up to 60 times and my scuba shop charges me $5 to refill my scuba tank very economical
Question:	how tall is this tank
Answer:	This product connects to the outlet port of a scuba tank only. Unless you have a high capacity air compressor you’re only able to get to 150psi. Compressed air tanks are 3000 psi or 4500 psi.
Question:	Scuba shop cant refill this tank coz the valve is different. What fitting do i need so as if he is just refilling a scuba tank
Answer:	No hose is needed.. the middle opening connects to scuba tank and the quick connect hooks to your smaller HPA tank.
Question:	How many fills can I get for my little Hatsan P1qe
Answer:	Dear customer, this orange o ring is included for the paintablll station adapter.

Product features

Charging System Set

- 3 liter / 30 cubic feet capacity cylinder

- Integrated valve gauge for input / output

- High pressure filling hose with Foster quick disconnect

Fill Station Assembly

Easy to installation and operation

Bottle Neck

Standard M18*1.5-6H threaded

Bottle Surface

Smooth outer surface

Production Process

Standard ISO 9001 production process to ensure product quality and safety

Main Uses

- It can be used in Loading gas, Emergency escape, Fire breathing, Underwater breathing, Lifesaving of ships, Clean energy, Snorkeling diving breathing, PCP rifle and Paintball filling, Medical care and Mine emergency.

- Widely for fire-fighting, chemical industry, shipping, laboratory, mine, pertroleum, warehouse, factory and metallurgy.