9 best air tank for paintball gun

Product description

A perfect tank for any paintball marker that operates on High Pressure Air. This Empire Paintball 48cu/3000 PSI tank is Made In The USA. Features: * Lightweight Aluminum DOT and TC certified cylinders "Made in the USA" * 3000 PSI fill capacity with an 800 PSI output pressure * User replaceable Bonnet

• Lightweight Aluminum DOT and TC certified cylinders "Made in the USA"
• 3000 PSI fill capacity with an 800 PSI output pressure
• User replaceable Bonnet

User questions & answers

Question:	Does the mad dog remote coil work with this because mine is not doing anything when I hook it up not even wen I press nipple on top
Answer:	What I did was, instead of pushing the straw into the cone attachment, I pushed the straw *out* of the cone attachment, then attached the merged units onto the duster. Hope that helps.
Question:	What connectors does this use? For refill and for output
Answer:	No, it is not ESD safe, but can be used if careful. The material is plastic which is an insulator that holds a charge. We are talking potentially thousands of volts! Keep the nozzles at least a few inches away from the motherboard or any electronics, spray from a distance, this is a powerful blower so it still works great. Never use the brushes on anything internal, only use them on case exterior, keyboard, etc.
Question:	Am I going to die if I put this on a mini gs
Answer:	The amount of pressure is very close to canned air, just a bit less than a full can of air. There is no build up limit, the power reaches 100% upon flipping the "On" switch. There are 2 speeds.
Question:	Does it use compressed air
Answer:	No you don’t need to remove the fans. They need to be blown out also. Just make sure you unplug the power before blowing it out.

• DURABLE WITH SMOOTH MOITION, sleek stainless steel construction brings smooth upward and downwards motion; 8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear.
• HIGH PRESSURE WITH SAFETY, high pressure goes up to 4500psi; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7” flexible micro-bore hose can bear up to 80MPA pressure, safeguarding your safety with superior quality.
• WIDE APPLICATIONS, compatible with most PCP pistols, rifles and air guns.
• USER-FRIENDLY DESIGNS, built-in oil and water separator for convenient operation; TPR padded grips for fatigue-free hand feelings, large gauge provides easy-to-read parameters.
• COMPACT & FOLDABLE FOR EASY STORAGE, 4mm detachable & foldable pedal for easy storage and transport, perfect to carry it around in your vehicle for unexpected use.

User questions & answers

Question:	Can I fill the 425cc bottle of my Kral rifle with this pump
Answer:	Sure if the unit has a fitting for your airgun. May take longer depending on the size of the tank. Not familiar with that airgun but it should work as long as you follow the pressure limitations!
Question:	Does it work with the crosman bpwf17 wildfire pcp powered multi-shot semi-auto air rifle,0.177 caliber
Answer:	It uses a standard foster connector. Hooked right up to my Air Force.
Question:	Should pump work on Benjamin Marauder out of the box? I can't get air to flow into the gun, and a rubber seal keeps popping out of the gauge housing
Answer:	Tighten the large nuts on the pump and pump slow and steady. If it doesn't work contact the seller, they are good to deal with in my experience.
Question:	can u fill a 20oz paint ball tank with it
Answer:	The answer below you is wrong I am doing the same thing for my HPA gun (runs off a standard 4500psi paintball tank) you can fill it as long as you ofc are actually wanting to fill with c02 which would usually be a cartridge but if you are filling a regular old paintball tank with air this will do the trick without having to drop $$$$$ on a high psi compressor.

Product features

Specification:

• Pump Chamber: 3-Stage
• Max Pressure: 4500psi/310bar
• Weight: 7.7 lbs
• Hose Length: 19.7" (50 cm)
• Handle Total Width: 10.6" (25 cm)
• Overall Height: 24.7" (62cm)

Before Using:

Make sure the tightness before using. Check the tightness between soft tube and air base. Make sure the high tightness between the connector and tire to avoid leaking. Inflating 30 times to lubricate the inner wall of air pump. Tighten the pump body with base.

Note:

Make sure the valve is tightly screwed before using the pump. Use some oil if there is any air leakage. (Oil NOT included)

Product description

HK Army Aerolite Carbon Fiber HPA Tank - 48/4500

The HK Army AeroLite Air System has been developed with performance and affordability in mind. The comprehensive system pairs a lite-weight carbon fiber bottle and a reliable aluminum regulator with an output pressure of 800 psi. The AeroLite system includes a 5-year hydro cycle and is available in 4 color options.

Features:

• 48 Cubic Inch Lite-Weight Bottle w/ 4500 psi Capacity
• Reliable Aircraft Grade Aluminum Regulator
• Weight 1lbs 11.5oz
• 800 psi Output Pressure
• DOT & TC Approved Cylinder
• 1.8K and 7.5K Burst Disks for Safety
• Five-Year Hydro Cycle
• Limited 90-Day Warranty

• 48 Cubic Inch Lite-Weight Bottle w/ 4500 psi Capacity
• Weight 1lbs 11.5oz
• 800 psi Output Pressure
• DOT & TC Approved Cylinder
• Five-Year Hydro Cycle

Product description

Your gun isn't going to shoot itself! You're going to need some air. Spray 'em with more paint than they can handle with the Maddog 20 oz. CO2 Paintball Tank! Re-fillable 20 ounce capacity tank BUILT FOR PAINTBALL. Featuring a lightweight, high quality, durable, aluminum body for approximately 800-1000 shots per fill! This 20 oz. refillable C02 tank meets or exceeds all ASTM, DOT, TC or CGA Standards or Requirements and is compatible with all standard CO2 powered paintball guns. Perfect paintball tank for all levels of play.

5 Year Re-Test Cycle - The date stamped on these tanks is the date the tank was manufactured, NOT an expiration date. Tanks are good for 5 years until they will need to be re-hydrotested.

Features:

* High Quality Aluminum 20 Oz Co2 Tank with Industry Standard Pin Valve

* Approximately 800-1000 Shots Per Fill - Never have to worry about running out of air mid-game

* Fresh Tank Dates Guaranteed - Five-Year Retest Cycle

* All Components Meet or Exceed All ASTM, DOT, TC or CGA Standards or Requirements

* Shipped EMPTY - Must Be Filled Prior to Use.

* 10.5" Length x 3" Width

* Tank Weight when Empty: 1.75 lbs

* Tank Weight when Full: 3lbs

* Buy Multipacks to Reload on the Go!



All CO2 tanks are shipped empty to comply with Department of Transportation laws

5 YEAR RE-TEST CYCLE - THE DATE STAMPED ON THESE TANKS IS THE DATE THE TANK WAS MANUFACTURED, NOT AN EXPIRATION DATE. TANKS ARE GOOD FOR 5 YEARS AFTER THIS DATE UNTIL THEY WILL NEED TO BE RE-HYDRO TESTED.

• **1 PACK** 20 Oz REFILLABLE CO2 PAINTBALL TANK - Lightweight Aluminum 20 Oz Capacity CO2 Tank
• COMPATIBLE WITH ALL STANDARD CO2 POWERED PAINTBALL GUN MARKERS - Approximately 800-1000 Shots Per Filll So You Won't Run Out of Air Mid-Game! Entry level to tournament pro, Maddog's got you covered!
• GUARANTEED FRESH MANUFACTURED DATES - 5 Year Re-Test Cycle - The date stamped on these tanks is the date the tank was manufactured, NOT an expiration date. Tanks are good for 5 years until they will need to be re-hydrotested - Exceeds All Industry Standard Safety Requirements - DOT and TC Certified - All CO2 tanks are shipped empty to comply with Department of Transportation laws
• SPECIFICATIONS: * Industry Standard Repeater Pin Valve * 10.5" Length x 3" Width * Empty Tank Weight: 1.75 lbs * Filled Tank Weight: 3lbs
• BUY MULTI-PACKS and RELOAD ON THE GO! Tanks Are Shipped Empty, Must Be Filled Prior to Use.

User questions & answers

Question:	Can these use compressed air
Answer:	The are Co2 tanks and cannot be used for compressed air.
Question:	Does it fit a spyder Victor
Answer:	Yes... but hard to refill. Need special nipple
Question:	Is the valve a standard cga 320 thread? and would it be useable with a sodastream with the appropriate adapter
Answer:	Yes and yes
Question:	can I use it for beer, does it work as a regular CO2 cilinder (rechargeble
Answer:	no

Product description

Refillable 48/3000 HK Army aluminum paintball tanks are a great alternative to carbon fiber systems. Industry Standard High Pressure compressed air regulator set to the standard output pressure of 800psi. The HK Army 48ci 3000psi HPA tank gives the look and performance of a high-end tank without the price tag. Regulators are individually hand assembled and tested on state of the art machines for outstanding quality and assurance.

Features:

* Durable Aluminum Tank Bottle

* Gunmetal HK Army 48ci / 3000psi HPA Compressed Air Tank

* Output Pressure 800psi

* Fill Level Gauge

* Includes rubber nipple cover for added protection/storage

* Compact pressure gauge

* Tri-Label UN ISO Certification Universal Acceptance

* Dual Burst Discs for added Safety

* 5 Year Hydro stamp

* Flat bottom for storage upright or on tables

* Tank measures 3.5 inches diameter x 10 3/4 inches tall

• Gunmetal HK Army 48ci / 3000psi HPA Compressed Air Tank
• Durable Aluminum Tank Bottle
• 800 psi Output Pressure
• 5 Year Hydro stamp
• Flat bottom for storage upright or on tables

• Power: 110V 60HZ; Motor Power: 1.8KW; Charge pressure: 30MPA; Working Pressure: 300BAR 30MPA 4500PSI. Air pump inflating speed: 2800r/min; Work flow: 50L/min; Oil standard: IS0 VG 46 & AW 46.
• WIDE APPLICATION: A perfect electric air pump for car tires, bike tires, scuba tanks, fire fighting, paintball, air pistols, leakage detecting, pressure-tight tests, automobiles, bicycles, air impermeability tests, pressure-proof tests, etc.
• QUICK-FILL PERFORMANCE: It takes only 30 minutes to fill a 6.8L tank to 300BAR. Designed with two-stage compression and two water-oil separators for performance stability.
• COOLING SYSTEM: For smooth performance, you have to prepare cooling water and replace it every 30 minutes for an optimal cooling effect. NEVER START THE MACHINE BEFORE YOU HAVE ENOUGH WATER PREPARED.
• ATTENTION: The compressed air pump will NOT automatically stop when the pressure reaches 300BAR/30MPA. You have to turn it off manually!

User questions & answers

Question:	Does this come with an oil and water separator or do you need to attach an external one
Answer:	Not thsi tank, the output is around 800-850 psi... You will need a tank with a regulator that has 3000 psi out put. Ninja makes a setup for that. The reg is called an X-Pressure reg and comes preset at 3000 psi.
Question:	What oil does it use
Answer:	Yes
Question:	Are there any orion parts dealers or mfg. reps in the us or even china that have an email address
Answer:	Yes you should be able to. As long as you have a compressor to fill the tank correctly. With the correct hose that connects to the tank. 4500 psi
Question:	Is there a bleed off
Answer:	We have tanks with regulators that have and available 1150 psi out put

Product features

Cylinder Head

Stainless steel air cylinder with aluminum coating enables a long lifespan. To prevent the cylinder head from overheating, please change the cooling water every 30 minutes.

Precise Gauge

This PCP compressor can pump your scuba or tank to 4500psi / 30Mpa. Remember to shut down the machine when the pressure reaches 4500psi / 30Mpa. YOU HAVE TO STOP THE MACHINE MANUALLY.

Oil Level

Please make sure to use the ISO VG46 & AW46 standard oil. Regularly ensure the engine oil level stays above the red dot and change the oil if it discolors.

Operation Notes:

1. USE PROPER POWER SUPPLY: Make sure to connect this to a socket that can take over 8A electric current, or the circuit may be damaged.
2. OIL REQUIRED: Fill it up with proper oil before using it. Compatible oil: ISO VG46 & AW46 oil (NOT included）.
3. COOLING WATER REQUIRED: Never start the pump before you have enough cooling water prepared. To prevent overheating, please change the water every 30 minutes.
4. COOLDOWN: Overworking (Over 30 minutes) or overheating (over 176°F) will lead to an automatic shut-off. If that happens, stop the item for a while and let it cool down.
5. KEEP AN EYE ON THE OIL: Make sure the oil level stays above the red dot. Replace the oil if the color changes.
6. TURN IT OFF MANUALLY: The item won’t stop automatically when the pressure reaches 30MPA/300BAR. YOU HAVE TO TURN IT OFF MANUALLY.
7. Do not touch the hot cylinder head right after it stops working.
8. Never use this in a humid environment or near flammable material. Keep it out of children’s reach.

Specifications

• Voltage: 110V
• Power: 1.80KW
• Working Pressure: 300BAR / 30MPA/ 4500PSI
• Working Capability: 50 L / min
• Inflating Speed: 2800 r / min
• Weight: 44.1 lb.
• Filling Time: 1L/ 10 minutes
• Cooling System: Water
• Oil Standard: ISO VG46 & AW46

Package List

• 1 x Air Compressor Pump
• 2 x Main Machines
• 1 x Hose Female
• 1 x Water Pump
• 1 x Water Cooling Pump
• 2 x Pressure Relief Screw
• 1 x Certification
• 1 x Spare Part
• 1 x Bag
• 1 x Separator
• 2 x Power Cables (110V)

Product description

The Empire Mini GS is the next generation of a paintball marker legend. The team at Empire has taken the proven Mini marker platform and designed and developed it to be even better. In addition to the battle proven Mini engine the GS includes a full wrap-around rubber foregrip that creates a secure grip and protection from paint and the elements. The Mini GS also adds an On/Off ASA that eliminates any thread issues and makes for smooth removal of your tank. The Competition Kit comes with: Empire Mega Lite Compressed Air Tank: Your Choice of 48/4500 or 68/4500 Empire Halo Too paintball Loader Empire Mini GS Paintball Gun Action Village Barrel Swab

• Empire’s Mini GS is next level with improvements from the previous platform, designed to be better than ever. The Inline Poppet Bolt shoots quietly and accurately paired with the 12” single piece barrel. Empire has added an improved On/Off ASA that eliminates any thread issues and makes for smooth removal of your tank. The Shockwave electronic board offers multiple adjustable firing modes (Semi, Burst, Ramp, Full Auto) including modes for league play.
• Empire's Mega Lite 4500 psi bottle is a lightweight carbon fiber high pressured air tank. This tank is DOT & TC stamped good for use and refilling in the US & Canada. The rebuildable regulator is constructed of aluminum and features dual burst disks for safety. This tank has an output pressure of 800 psi and is not adjustable. This tank has a five-year hydro test date requirement over a 15 year lifespan. All Compressed Air tanks are empty when shipped.
• The Halo Too provides the best performance for half the cost of the top paintball loaders, making it a great choice for entry level players. The outstanding performance makes this an easy choice for most players. The ultra-quiet belt drive and Freeway Anti-Jam will force-feed 20+ balls-per-second, allowing your marker to throw plenty of paint at your opponent without jamming. 4 AA batteries are required for the loader to work and are not included.
• Anyone who plays paintball knows that ball breaks can occur Randomly leaving your barrel filled with paint and paint shell pieces. Featuring a thick swab on both ends, the ANS Flex Swabs fills the inner diameter of your barrel reaching every crevice. Its super absorbent material leaves no paint or residue behind. The flexible material under the swab makes it easier to carry it in your pocket so you can have access to it on the field.

Product description

The ORIION Semi-Automatic .68 caliber paintball gun marker is a great starter gun. The Hunter Marker is light and compact featuring an internal air line system, an integrated foregrip, and a double finger trigger for fast easy firing! Features: .68 Caliber Semi-Auto Paintball Marker Double Finger Trigger For Fast Shooting Hose less design with Internal gas line System Clamping Feedneck to Secure Loader Vertical front Forgrip For Comfort and Control Works with CO2 or HPA Compressed Air Silver Package Includes: * Paintball Marker * Industry Standard 48CI 3000 PSI Refillable Paintball Tank (Shipped Empty) * Anti-Fog Paintball Mask * 200 Round Paintball Loader

• ✅ COMPLETE ALL-IN-ONE PAINTBALL GUN PACKAGE! Oriion .68 Caliber Semi-Automatic Paintball Marker with HSA Paintball Gun Accessory Kit. Everything You Need to Get in the Game! Paintball Package Includes: Industry Standard 48CI 3000 PSI Paintball Tank (Shipped EMPTY), 200 Round Gravity Fed Paintball Loader, Anti-Fog Paintball Mask.
• ✅ PERFECT ENTRY LEVEL PAINTBALL MARKER! The Oriion is lightweight, compact, and comes standard with a double trigger for faster firing! Whether you're just getting into the game or a professional Paintball player, Oriion paintball gun takes you to the next level! As it's namesake suggests, Oriion is BLACKED OUT for a clean, tactical look ready for battle! Equipped with an ergonomically-designed foregrip and features an internal airline system.
• ✅ ORIION .68 CALIBER PAINTBALL GUN MARKER - Semi-Automatic - Double Finger Trigger For Fast Shooting - Tactial ALL BLACK Stealth Body - Hose less design with Internal gas line System - Clamping Feedneck to Secure Loader - Vertical front Forgrip For Comfort and Control - Works with CO2 or HPA Compressed Air Paintball Tanks
• ✅ INDUSTRY STANDARD PAINTBALLING ACCESSORIES - High Quality REFILLABLE 48 CI 3000 PSI Paintball Tank for approx. 1200 shots per fill. Anti-Fog Paintball Mask with Full-Face Hard Plastic Protection, Closed Cell Foam, and Adjustable Head Strap. Gravity Fed 200 Round Hopper.
• ✅ TAKE THE PAIN OUT OF PAINTBALL! Oriion Bundles the Best Paintball Accessories in the Industry For An EASY, ALL-IN-ONE, Complete Package! The Silver Paintball Gun Starter Kit has Everything You Need for Field Entry.. Fill Your Tank, Add Some Paint, and You're Set! Oriion's Paintball Marker comes with a 1-Year Manufacturer's Warranty, not to mention, Cerfified Technical Support Available as a Resource For You and Your Marker All Year Long.

• Voltage：110v, Frequency：60Hz, Flow Rate：30L/min; 1cfm, Power：1500w. Working Pressure Service: Normally rated pressure 20Mpa/200bar/3000psi to Max 30Mpa/300bar/4500psi.
• Motor Type: Single phase motor. Max Filling Volume: Less than 1 liter / 68 ci, Filling time: 0.5L container 0-30MPa about 5-10 minutes, 1L container 0-30Mpa about 15-20 minutes.
• Pressure adjustment system with manual shutdown, comes with efficient and reliable safety valve, automatic leaking after full filling until turn it off, cooling way is circulating water cooling, the water tank and pump is separated, drain valve by hand.
• Directly to personal PCP air gun / paintball or paintball co2 tanks for filling, not for greater volume scuba diving tanks.
• Compacted confined space design strong security and reliability, easy operation Low vibration, speed, and noise. (Weight: 19kg, Dimension(L-W-H): 360mmx180mmx380mm, Noise Level dB(A): Less than 65 )

User questions & answers

Question:	Is it safe to use this to fill Scuba tanks for breathing air
Answer:	Yup! There's a small screw similar to an Allan key type that you unscrew and the regulator pops right off
Question:	How do I know when it's done
Answer:	Yes. Worked great on my brothers g5
Question:	Does this unit come with fill hose and connector to airgun? Also, is there a moisture filter or trap on the unit? Thanks
Answer:	Yes, this tank can be used with the D3FY markers
Question:	hi, i just bought the ironman compressor, and i want to know if it comes with a hose for pcp. or i have to buy it separately
Answer:	No it does not come with air and yes you will have to fill it when you use it. It is vary simple to fill you do not even need to remove it from your marker.

Product features

COOLING FAN

WATER IN / OUTLET

PRESSURE GAUGE

TEMPERATURE DISPLAY