13 best allen allen hunting pellets

• Includes three spinning targets: two 2.25" and one 1.5"
• Solid steel construction
• Great plinking sound when you hit the spinning targets
• Perfect for airguns, rifles up to .22 caliber, and pistols
• Folding stand for quick setup and easy storage

User questions & answers

Question:	Can this handle a bb going approximately 450fps
Answer:	Yes it surely can. I use a rifle that shoots 1500fps and leaves a mark but doesn't damage target. I highly recommend it.
Question:	How does it hold up to 9mm
Answer:	Not well at all, I tried it and one of the spinners was distroyed. Do not advice going over a 22
Question:	is it had it build
Answer:	Easy to build, but you have to put it in soft ground. I put it in hard dirt and the leg broke off the first time.
Question:	I see it's up to .22, but what happens if I set it back a few hundre yards and shoot it with Mosin
Answer:	The targets are very small and I purchased them for my kids to use with their BB gun. I think anything bigger than a .22 would probably put too many holes through it, the targets are not very thick. If your a few hundred yards out I hope it's a really good scope because they stand about 1' in height.

• Fits scoped rifles up to 46"
• Four accessory pockets store cleaning supplies, targets, hearing and eye protection, etc.
• Easy clean lining
• Thick foam padding
• Includes an adjustable sling

User questions & answers

Question:	Would y'all reccomend it for an AB3 Browning with a 55mm objective and high rings
Answer:	Not sure, works for my Hatsan pellet rifle with scope.
Question:	Will a scoped remington 597 fit
Answer:	Not sure what model a 597 is, but I have a Browning X-bolt with a 42mm objective scope in my caseand it works fine. Hope that helps.
Question:	i have a benelli nova 28 inch barrel, will that fit inside
Answer:	Hi JF, It looks like there are several models of the Benelli Nova with a 28" barrel, most of them looking like they're about 49-50" in length. If yours is the same, it should fit (the case is 52").
Question:	Can these pockets fit ear muffs
Answer:	The pockets are fairly small. Ear plugs, not full size protection.

Product features

4 Pockets, 2 Sizes, 1 Adjustable Sling Included

The Daytona Shotgun or Rifle Case by Allen is a great case to protect and transport your long gun. This case comes equipped with four accessory pockets to get you and your gear where you need to go. The exterior fabric is constructed from rugged Endura fabric that will take whatever you or the elements can throw at it. With our easy clean lining you won't have to spend a bunch of time keeping the inside of your case clean. This case also comes with an adjustable sling for multiple sizes and applications.

Product description

Crafting your skills at the range is necessary before hitting the field—but where to begin? EZ-Aim Target Shooting Systems will challenge any level of shooter with the most comprehensive options in the industry. No other mounting system delivers you the versatility and scalability than EZ-Aim Custom Target Systems (CTS). Launched in 2019, we listen to what today’s shooters demand with an array of products designed to test what you can bring to the table. The only limit of target exploration is your creativity and imagination. Stay on target with EZ-Aim. The EZ-Aim Air Gun Pellet & BB Shooting Target & Trap features an easy-to-assemble, heavy-gauge steel construction designed to catch pellets and BB’s from air guns firing up to 1,000 feet per second (FPS). Small, swivel style targets help improve your accuracy, consistency, and confidence when you need it most. Compact shooting target system ensures you have what you need to challenge your abilities as well as your imagination. Get creative and stay on target with EZ-Aim.

• AIR RIFLE SHOOTING TARGETS: 2 swivel style targets measure 1.5-inches in diameter & are for use with soft lead pellets/BB’s
• TARGET: Designed for air guns shooting up to 1,000 FPS
• BB GUN TARGET TRAP: Heavy-gauge steel construction is easy to assemble & measures 7-inches long x 9-inches wide x 7.5-inches tall
• EZ-AIM TARGETS: Get creative with how you challenge yourself at the range & take your skillset to the next level
• COLOR: Black

Product description

Allen’s Tejon Oversized Gun Case in Mossy Oak Break-Up Country camo has an extra wide design to fit guns with bi-pods and large scopes up to 50″ in length. The case also features heavy foam padding, three accessory pockets, a removable padded shoulder strap with heavy weight metal hardware, and a heavy-duty carry handle.

• Mossy Oak Break-Up Country camo
• Fits scoped rifles up to 50"
• 3 external pockets for calls, cleaning supplies, and other accessories

User questions & answers

Question:	I have a windchester 30-06 with burris eliminator 3 scope and a bipod will this case work for me
Answer:	I use this case for a Browning Xbolt 30-06 with a Nikon scope of the same size. It works fine. I have not tried it with a bipod attached. It would depend upon the bipod and how compact it folds up. They are not all the same.
Question:	I have a knight 50 cal with a 50mm oversize scope with a bipod will this fit
Answer:	Yes I put my Thompson center dimension 300 win mag with a bipod and a 50 mm scope and it is fine. I really like the case.
Question:	Am getting a 270 winchester with scope will it fit
Answer:	It should, my Mosberg 30-06 with scope fits with plenty of room.
Question:	inches is that the outside or the inside of the case
Answer:	My "Tejon" measures 50 inches - outside, in length; inside is 49 inches. I use it to carry my classic Winchester Model 101, which is 47-1/4 inches overall leaving 1-3/4 inches of room to spare. They state the case will "fit any rifle up to 48-inches". As can see from my case's actual dimensions, '48 inches' seems a little conservative. Hope this helps.

Product features

Tejon Oversized Rifle Case 50-Inch, Mossy Oak Break-Up Country Camo

The Tejon rifle case by Allen was designed as an oversized gun case at 50-inches long. Easily carries firearms up to 50-inches in length with optics and bipods attached. In addition to size, it also features heavy-duty foam padding to protect your firearm. The Tejon is equipped with three accessory pockets, removable padded shoulder strap with heavyweight metal hardware, and a heavy-duty carry handle.

• Baktrak shoulder gripping system
• Nubuck leather face with accent stitching
• Lightweight, low profile gun sling
• One hand, quick adjusting sling with swivels tested to 300 pounds
• Heavy-duty 1.25" webbing
• Sport type: Outdoors

User questions & answers

Question:	How long is it
Answer:	Standard length for a Rifle. Adjustable and fits over my shoulder well.
Question:	Does it have a thumb loop
Answer:	Yes it does.....
Question:	How long is it at maximum length
Answer:	Unfortunately at this time I am currently working away and cannot answer with certainty. If it helps any I have it on a tikka rifle in 308. It fits with extra slack
Question:	Does this sling have a "tail" when in the small/shorter configuration
Answer:	I have mine on a Hemry Govt 45-70 lever gun. It is a shorter rifle and I have NO tail or extra sling material hanging. Not sure if this helps but it is a VERY nice quality sling. And I have several 10-15 I guess and it is one if not the most favorite.

Product description

The Baktrak Woodmoor Sling features Mossy Oak Break-Up Country camo and Baktrak technology, which is designed to reduce sling related noise with its Extreme Grip rubber tread grip back. With 1.25″ heavy duty webbing and a thumb loop, this sling is one hand, quick adjusting and has swivels tested to 300 pounds.

• Baktrak extreme grip rubber tread technology reduces slippage and sling related noise
• Includes swivels tested to 300 pounds
• Mossy Oak Break-Up Country camo
• One hand, quick-adjusting
• Thumb loop for comfort

User questions & answers

Question:	Is this really 44 inches long? It doesn't look that long
Answer:	mine has not come yet
Question:	Does this sling flex or stretch
Answer:	It does not stretch. The length is adjustable though. I find it to be a comfortable sling because it distributes the load over a larger area, but because it is thicker than most and has a beefy rubber pad it is pretty heavy. Overall, I really enjoy it.
Question:	Well which is it, rubber cleats or orange bumps on this sling ? The pictures show both
Answer:	Good observation. My sling is black rubber cleats/bumps. LoL!!

Product description

The Baktrak Boulder Rifle Sling features a tacky back made from rubber gripping dots to grip your shoulder and reduce sling related noise. The face of the sling has a panel made from flexible material that helps to keep the sling from twisting while on your shoulder. One hand, quick adjusting, this sling has 1.25″ heavy duty webbing and a thumb loop, and the swivels are tested to 300 pounds.

• Baktrak rubber gripping dots reduce slippage and sling related noise
• Flexible sling face keeps it from twisting
• One hand, quick adjusting
• Includes swivels tested to 300 pounds
• Thumb loop for comfort

User questions & answers

Question:	How long is longest length on this? 20" seems short
Answer:	It is adjustable. I have mine at 32 inches on two of my Henry's. This is a great sling by the way.
Question:	What other items might I need to attach this to a rifle? I have a howa 1500 oryx and it’s a beast to carry the whole time
Answer:	All you need is , the rifle must have the attachment pins in the stock .
Question:	What is the max length this sling can be adjusted to
Answer:	Maybe 34" to 35".
Question:	It's hard to tell by the stock photo, but does this sling have a thumb loop
Answer:	Yes, there is a thumb loop. Very nice sling.

• Dimensions: Carbon Fiber Tripod - 7" - 59" of height adjustment and weighs 7.5 pounds
• Ease of use: This stable shooting platform features an adjustment knob that controls up to 50 degrees of tilt and a clamping head that pans 360 degrees with tension adjustment
• Versatility: Features a 3-position leg lock for use in the prone, kneeling, sitting and standing positions and can secure any weapon for hands-free use. High-density foam grips
• Durable: With a durable carbon fiber construction and large diameter carbon fiber legs, this rugged shooting rest 17 times stronger than aluminum and 15% lighter
• Be prepared: With retractable steel spikes, an integral bubble level and no-slip lever locks this tripod is secure, stable, quiet and ready for quick adjustments during that vital moment
• Guaranteed: This product is covered by a Limited 1-Year Warranty.

User questions & answers

Question:	Why this vendor is charging more taxes than 6% for Michigan
Answer:	Because they hate freedom.
Question:	Is there an attachment to mount a spotting scope to this system? I don’t want to carry two tripods into the field
Answer:	1/4" stud on mine. Can attach a spotting scope on.
Question:	What material is the clamp made out of
Answer:	The clamp is made out of magnesium, read the description for confirmation of this. I have the Carbon Fiber version and absolutely love how strong and solid it is. I also bought an extra ultralite clamp for another tripod to put my spotting scope and rangefinder in. It makes your rangefinder so much more precise. I own a Primos trigger stick tripod and find it near impossible to hold on target at even 100 yds. I shot prairie dogs out to 547 yds with my deathgrip. Proof is in the performance. Bought two more of the Carbon ones for two of my hunting buddies and they sent me a text thanking me for talking them into the purchase because they love theirs too! The bad reviews must not be doing it right. My buddy said he didn't even take his rifle out of the clamp when moving shooting locations, while shooting prairie dogs, and it never moved. Clampdown legs feel like they are very well built. I feel there isn't a cheap component in the construction and super simple and fast to set up. Yes it weighs over 7 lbs, but that's what makes it a solid platform for accuracy.
Question:	Is the carbon fiber version worth the extra
Answer:	I do not own either yet, but I ask the same question and realized the $100 saves you only 1lbs weight wise. Aluminum is 8.5lbs and C-fiber is 7.5lbs. As far as materials go it maybe worth it as far as rigidity/flex.

Product features

Clamping Shooting Rest

The BOG DeathGrip is engineered to be the most stable precision tripod on the market. The aluminum legs have unmatched durability and the carbon fiber legs reduce its overall weight making it highly portable without sacrificing stability. The strength of the carbon fiber legs decreases the amount of flex, making this precision tripod extremely accurate for even the beginning hunter. The patented clamp secures any weapon, hands-free, freeing the BOG hunter to glass or call on the hunt with ease.

Innovative Clamping

Saddle tightens to almost any size forend to ensure a solid grip on the gun when it matters most

Lightweight Design

Aluminum legs are light and the carbon fiber legs are even lighter, creating an easily portable shooting rest that is ready to go anywhere

Adjustable Legs

All legs are fully adjustable to ensure the perfect height and a level rest on all terrain

Product description

Tactical Parts Hunting Night Vision Scope with CCD and Flashlight for Riflescope Outdoor Night Hunting Optics Gun Accessories

Description:

LCD Screen: 5 inches screen

NOTE

1.Riflescope diameter 1 inch / 30mm

2.Monitor Screen ( 2pcs 18650 battery) and Infrared Flashlight( 1pcs 18650 battery ) (Note:not including riflescope ,Not include battery)

3.The power time depends on the quality of batteries.If the battery will run out, the screen will remain flashing white.

TEST INSTRUCTION

First of all,you need to shoot long distances, adjust the camera is the screen showing a clear cross (with crossed reticle riflescope), then adjust the eyepiece of the riflescope (zoom in or out), and finally adjust the objective lens until clear.

SHOOTING RANGE

1.As for shotting range.It depends on your shooting target size, IR flashlight and riflescope.

If it is a small target(rats),30 to 40 yards you can shoot rats;if large target(elk),the shooting distance will be farther 100+ yards.

2.With a better IR flashlight and riflescope,farther vision distance in the dark.

• 【DAY AND NIGHT】Hunting Night Vision can provide a great view in the day and night.
• 【HIGH QUALITY NIGHT CAPTURES】One-piece Integrated Night Vision perfect visual experience in Complete darkness. Ideal for a wide variety of use such as Surveillance, Night Hunitng and Exploring caves and so on.
• 【EASY TO USE】Night Gun Sights can be easily accembled on Riflescope and simple operation (Batteries not included).
• 【MULTI FEATURES】5 inches Great display screen present,360 degrees adjustable CCD HD camera, Extended sliding infrared 5W flashlight.
• 【WARRANTY SERVICE】Every night vision issued after inspection. If you have any questions about the product, please contact us as soon as possible

User questions & answers

Question:	Will this be able to handle 308 win recoil
Answer:	Suitable for the impact force of ordinary small rifles
Question:	is there an on board memory or SD card for later viewing of videos or photos
Answer:	This style of night vision device does not have the function of taking pictures, you can enter our shop to search：RHYTHMARTS Digital Night Vision Monocular for Complete Darkness Day Night Take Photos Video for Hunting

Product description

The officially licensed Ruger Rifle Case is a classic black case with the Ruger name on the carry handles. This case has a zippered accessory pocket, dense foam padding, and is made of rugged Endura fabric. Made in the USA.

• Classic black with Ruger print on the carry handles
• Large zippered accessory pocket
• Dense foam padding to protect your firearm
• Rugged Endura fabric construction, made in the USA
• Fits rifles up to 40"

User questions & answers

Question:	I do like the Ruger firearms and supplies. But will it fit with the 3x9x35 scope mounted on
Answer:	this bag is very wide to accommodate for a scope. I have a 10/22 with a red dot scope on it and it fits will no problems.
Question:	Will a scoped marlin 45/70 fit this 40inch bag
Answer:	I use this rug for all my Marlins. My cowboy gun is 40 inches, but does not have a scope. The rug has plenty of room for a scoped firearm.
Question:	Is the 40" good for a basic AR
Answer:	You will have to measure your "Basic" AR-15. They come in several barrel lengths and buttstock configurations.
Question:	I recently bought a Ruger American rifle that is 42.5" in length... will it fit inside this 46 length rifle case
Answer:	I currently use this bag to carry my Ruger American Rimfire (41" in length) and have approximately a 2" cushion at both end of the rifle. Should work fine!

Product features

Allen Company Ruger Rifle Case, Black with Ruger Logo on Handles

The Ruger Rifle Case comes with the Ruger name on the carry handles. This rifle case has a zippered accessory pocket to hold magazines and other accessories. The dense foam padding will keep your rifle secure and safe during transportation. This rifle case is made of rugged Endura fabric right here in the USA.

• Zippered accessory pocket
• Can hold up to a 40” & 46″ Rifle
• Dense foam padding
• Rugged Endura Fabric
• Made in the USA
• Ruger name on carry handles.

Product description

Allen Company Tactical gun/rifle cleaning kit, 66 piece set (70541). The professional grade Ultimate Tactical Gun Cleaning Kit (66 Pieces) uses high grade components, stored in a box tool box specifically built for gun cleaning.

• Kit comes in a tool box designed for gun cleaning
• Variety of handgun and tactical rifle calibers, plus 12 and 20 gauge shotguns and MSR cleaning components
• Extra space for storing items like chemicals (not included)
• Includes bronze bore brushes, cotton swabs, brass slotted tips, brass jags, brass adapters, specialty MSR tools, upper receiver brush, cotton swabs, and more!
• Handy labeled slots keep your kit organized

User questions & answers

Question:	Is everything labeled
Answer:	No
Question:	What size are the threads
Answer:	Not sure what threads you are talking about. If its the threads on the tools they fit on my cleaning tools from other companies. I imagine they are universal.
Question:	Will this work for 9mm and or .38 hand guns
Answer:	Yes. Works with almost all guns. It has everything I need for my 9mm, .22, .40, .45, 12 gauge and AR-15. Nice deep case for storing cleaning solution, oil, wipes, etc. I also has two compartments on the top if you look close. I use them to store patches and swabs.
Question:	I may have missed the info but can this clean a
Answer:	Yes

Product features

The Professional Grade Ultimate Tactical Gun Cleaning Kit (66 Pieces)

The professional grade Ultimate Tactical Gun Cleaning Kit (66 Pieces) uses high grade components, stored in a box tool box specifically built for gun cleaning.

Each cleaning tool has its own fitted compartment that is named with the items name or size.

This kit is designed for the handgun and tactical rifle shooter, and it has components for 12 and 20 gauge shotguns, as well as Modern Sporting Rifle, and various pistol calibers.

The tool box has ample space for cleaning chemicals (not included), extra patches, and other small items, like extra jags or brushes.

Kit includes the following

• Bronze bore brushes for shotgun 12 & 20 gauge and bronze bore brushes for rifle & pistol: .50, .44/.45, .40, .357/9mm, .30, .22
• Cotton swabs for shotgun 12 and 20 gauge and 3 cotton swabs for pistol, .357/9mm, .40 and .44/.45
• Caliber 3 brass slotted tips: .22, rifle/pistol, and shotgun
• 6 brass jags for rifle and pistols .45, .44, .40, .357 / 9mm, .30, .22
• Caliber brass adapters for 5-40 (.20 Caliber and less) 8-32 (rifle and pistol) and 5/16-27 (shotgun)
• Upper receiver brush, bolt carry key brush .223 and .308 chamber brush and tube cleaning brush
• Hex handle for use with one piece of the brass rod and 3 specialty tools for MSR
• Clear plastic tube and rope cable 2 three-piece cleaning rods, one for shotgun and one for rifle/handgun
• Muzzle guards for each cleaning rod: 4mm and 6mm 3-piece brush and pick set
• Cotton cleaning patches, 10 cotton swabs and 10 cotton cleaning cloths

Product description

Allen’s version of this classic shooting accessory is made from durable, heavy weight elastic that fits snugly to the stock of your firearm without interfering with holding or aiming the gun. The shell loops are uniformly sewn for in an easy-access position, so your shells are reliably in place when you need them. Installs in seconds on most long guns without slipping, and is designed to withstand years of outdoor use.

The clever, convenient Allen Company Rifle Buttstock Shell Holder attaches firmly to the butt of any rifle, and holds five shells in an easy-access position. Elastic ammunition loops keep each shell reliably in place, while durable black endura material will hold up to years of heavy outdoor use.

The sturdy synthetic shell holder slips conveniently over your rifle's buttstock.

About Allen Company

Headquartered in Broomfield, Colorado, The Allen Company was founded in 1972 and is a leading supplier of gun cases, hunting accessories, and outdoor products.

• Designed with only the toughest, roughest users in mind
• Slides on the to butt of most shotguns in seconds
• Elastic ammunition loops hold shells in place
• Holds 5 shotgun shells in an easy-access position
• Durable construction will hold up to years of use

User questions & answers

Question:	Will this fit a winchester super x sxp
Answer:	yes it will...
Question:	Will this fit on a Dickinson Commando
Answer:	It will fit almost any shotgun. All the Turkish shotgun will accept this and work well
Question:	will this hold .410 shells
Answer:	If it's brand new and the individual sleeves are not stretched yet, yes, they will hold .410 gauge shells, but will drop them under recoil. I would suggest getting the sleeve that holds rifle rounds, also available here on Amazon.com. They hold 9 rounds as opposed to 5 shells.
Question:	Will this fit on a Stevens
Answer:	Yes,,, in fact that's the exact one I have on my Savage Arms, Stevens Model 320, Security 12-ga. It's well worth the money.

• COMPACT FOR CLOSE QUARTERS: 32mm x 26mm x 26mm(1.2" x 1.0" x 1.0") Compact but powerful in function, it’s adjustable for windage and elevation.
• ALUMINUM ALLOY CONSTRUCTION: Built with ultra-solid and lightweight T6061 aluminum alloy - the same material used in aerospace and sports car chassises. Finished in matte black.
• DETACHABLE PICATINNY RAIL RISER: Mount your scope or tactical flashlight atop the laser, or remove the riser mount for a sleek, low-profile setup. The 1913 rail riser easily mounts on all your different Pic rail equipped guns, from shotguns to handguns, and everything in between.
• EQUIPMENT FOR ALL: We make tactical gear for everyone from weekend hunting hobbyists to hardcore concealed carriers - even airsoft and paintball players love our specialized gun accessories for the tactical advantages they provide.
• LASER WAVELENGTH: 650nm, power<1mw 100m

User questions & answers

Question:	Will it work on a sccy cxp2 9mm
Answer:	No, this is just the GL422N that comes with an HL760 reciever. The GL422N-14 comes with a CR600 reciever.
Question:	How does it mount to a 4inch revolver
Answer:	Yes, it is a GL422N Dual slope grade laser.
Question:	Does it have an on off switch
Answer:	The spectra 400N series dual grade lasers come with rechargeable battery packs and charger
Question:	Do it comes with a green laser
Answer:	Yes, it comes with an HL760 laser reciever.