13 best vortex laser sights

Product description

When situations demand split-second target acquisition and maximum field of view, mount up the StrikeFire II and shoot—both eyes open. Feature-rich, versatile and reliable, the StrikeFire II is a great choice for shooters who want a quality red dot sight. Available in multiple reticle colors.

• The Strikefire II Red/Green Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions
• Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition. Max Elevation Adjustment- 100 MOA. Max Windage Adjustment- 100 MOA
• The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance
• An offset cantilever mount is provided; allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail
• With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery.

User questions & answers

Question:	Will this fit on my AK with the mount that it comes with
Answer:	It is supposed to be BTR-2, but I received a simple 3 dot drop down instead.
Question:	What's the difference between this the 501 and the 505. Does this come with the Cantilever Mount
Answer:	Yes its included
Question:	What is the moa on this
Answer:	Yes, good for close and medium range
Question:	does this have the tall mount compatible to the AR or the short mount for rifles
Answer:	No

Product features

StrikeFire II Red/Green Dot Sight (SF-RG-501)

When situations demand split-second target acquisition and maximum field of view, mount up the StrikeFire II and shoot—both eyes open. Feature-rich, versatile and reliable, the StrikeFire II is a great choice for shooters who want a quality red dot sight. Features sleek rear-facing controls for power on/off and easy adjustment of ten dot intensity levels—lowest two settings are night-vision compatible. Automatically returns to the last dot intensity used when powered up. The 30mm aluminum alloy chassis provides extra-high recoil rating and is waterproof and fogproof. Strike fast!

The lower 1/3 co-witness cantilever mount model is ideal for rifle platforms, positioning the optic bore center 40 mm above the base surface.

Red/Green Dot Reticle

The 4 MOA Red/Green Dot is ideal for situations that demand split-second target acquisition. Choose among ten variable illumination settings—the lowest two settings are night-vision compatible.

The key thing to remember when shooting with the StrikeFire II red dot is to keep both your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!

Windage and Elevation Adjustments

The StrikeFire II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact 1/2 Minute of Angle (MOA). 1/2 MOA will correspond to 1/2 inch at 100 yards, 1/4 inch at 50 yards, 1/8 inch at 25 yards, etc.

Adjust the elevation and windage settings:

1. Remove the dial covers.

2. Use the raised bar on the dial cover, a coin or screw driver to make the adjustments.

3. Turn the adjustment dial in the appropriate direction as indicated by the arrow on the dial. Move the dial in the direction you wish the bullet’s point-of-impact to change.

Mounting the StrikeFire II

To get the best results from your StrikeFire II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.

To attach the included cantilever ring mount:

1. Attach the lower part of the cantilever ring mount to the rail/base and make sure this is solidly seated in the base groove. To prevent recoil injury, position the ring so that you have at least four inches of eye relief.

2. Be sure the base clamp is hooked around the outside of the rail/base. Press downward and forward toward the muzzle. Then, firmly tighten the base clamp hex nut.

3. Place the StrikeFire II on the lower part of the cantilever ring mount with the adjustment control buttons facing the shooter. Tighten ring cap screws evenly until all are snug—use caution so as not to over-tighten. Once the screws are tightened, the StrikeFire II should not move on the rail/base.

Product description

If you want a high-quality red dot sight but don’t want to break the bank, the StrikeFire II is a great choice. The sleek, rear-facing controls allow for easy adjustment of its ten dot intensity levels; the lowest two settings are night-vision compatible. It features a 30mm aluminum alloy chassis, extra-high recoil rating, and is waterproof and fogproof for ultimate reliability.

• The Strikefire II Red/Green Dot is a rugged, reliable red dot sight that is at home in a variety of shooting applications. It allows the shooter to operate between two dot colors and ten brightness settings to easily adjust for changing conditions.
• Fully multi-coated lenses provide a clean and bright, unobscured point of view. Unlimited eye relief allows for rapid target acquisition.
• The single-piece chasis is compact and lightweight but still delivers shockproof performance withstanding both recoil and impact. Nitrogen purging and o-ring seals ensure fogproof and waterproof performance.
• An offset cantilever mount is provided; allowing you to move the sight forward to be used in conjunction with a magnifier and backup iron sights all on the same rail.
• With aesthetics and functionality in mind, the power controls are at the rear of the Strikefire for easy access. The Strikefire II runs off a CR2 battery. Vortex Optics hat included, hat color may vary.

User questions & answers

Question:	Will this fit on a h&r single shot rifle
Answer:	It fits a Picatinny rail. You can likely install one if your firearm doesn't already have one.
Question:	What is the expected battery life on this
Answer:	Sorry for jumping in here late, but just wanted to add that John was 100% correct on his answer. If the brightness is set too high for the ambient light conditions, you can get a "starburst" effect. We recommend running red dot sights at the lowest brightness setting that you can still clearly see the dot (the exact setting will depend on ambient light)
Question:	How easy will it be to see a man sized target at 300m
Answer:	That shouldn't happen. Best is to contact them, I believe they will replace faulty red dot sights. The laser and red dot are independent from each other. If you push the Red Dot button it should turn on. & When you turn off you have to press it for like 5 seconds. Just contact the company.
Question:	HOW CLEAR ARE THE RED AND GREEN DOTS
Answer:	I have a magpul flip up rear and iron on the barrel. My red dot sight is mounted just in front of of the flip rear. My reticle when sighted hovers just above my front iron sight but I can see my magpul rear through the optic if need be. Hope this helps. I love this optic on my AR

Product features

StrikeFire II Red Dot (SF-RG-501) & Hat

When situations demand split-second target acquisition and maximum field of view, mount up the StrikeFire II and shoot—both eyes open. Feature-rich, versatile and reliable, the StrikeFire II is a great choice for shooters who want a quality red dot sight. Features sleek rear-facing controls for power on/off and easy adjustment of ten dot intensity levels—lowest two settings are night-vision compatible. Automatically returns to the last dot intensity used when powered up. The 30mm aluminum alloy chassis provides extra-high recoil rating and is waterproof and fogproof. Strike fast!

The lower 1/3 co-witness cantilever mount model is ideal for rifle platforms, positioning the optic bore center 40 mm above the base surface.

Red/Green Dot Reticle

The 4 MOA Red/Green Dot is ideal for situations that demand split-second target acquisition. Choose among ten variable illumination settings—the lowest two settings are night-vision compatible.

The key thing to remember when shooting with the StrikeFire II red dot is to keep both your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical. As long as you can see the dot, you’ll hit your target!

Windage and Elevation Adjustments

The StrikeFire II red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact 1/2 Minute of Angle (MOA). 1/2 MOA will correspond to 1/2 inch at 100 yards, 1/4 inch at 50 yards, 1/8 inch at 25 yards, etc.

Adjust the elevation and windage settings:

1. Remove the dial covers.

2. Use the raised bar on the dial cover, a coin or screw driver to make the adjustments.

3. Turn the adjustment dial in the appropriate direction as indicated by the arrow on the dial. Move the dial in the direction you wish the bullet’s point-of-impact to change.

Mounting the StrikeFire II

To get the best results from your StrikeFire II red dot, proper mounting is essential and, although not difficult, the correct steps must be followed. Your firearm will need to be equipped with a Picatinny or Weaver style rail/base.

To attach the included cantilever ring mount:

1. Attach the lower part of the cantilever ring mount to the rail/base and make sure this is solidly seated in the base groove. To prevent recoil injury, position the ring so that you have at least four inches of eye relief.

2. Be sure the base clamp is hooked around the outside of the rail/base. Press downward and forward toward the muzzle. Then, firmly tighten the base clamp hex nut.

3. Place the StrikeFire II on the lower part of the cantilever ring mount with the adjustment control buttons facing the shooter. Tighten ring cap screws evenly until all are snug—use caution so as not to over-tighten. Once the screws are tightened, the StrikeFire II should not move on the rail/base.

Product description

Make your rifle, pistol, or shotgun even better with the Venom Red Dot sight. A 3 or 6 MOA dot promotes rapid target acquisition, while providing a precise point of aim—getting shots down range and on target fast.

• The Venom Red Dot Sight-3 MOA promotes rapid target acquisition while providing a precise point of aim; getting shots down range and on target fast. The Venom's aluminum housing ensures this unit will stand up to whatever you throw at it.
• High quality, fully multi-coated lenses offer a clean, wide field of view. Power and dot intensity controls are conveniently located on the left side of the sight to choose between 10 brightness levels.
• The Venom also has an auto-brightness mode that uses an ambient light sensor to control dot intensity if the shooter prefers. Parallax Free
• 1 MOA wind age and elevation adjustments are super sleek and make sighting in a breeze. The top load system makes changing the CR1632 battery a breeze, as you will not have to remove your sight to change the power source.
• The Venom Red Dot will fit well on your rifle or shotgun giving you optimal flexibility.O-ring seals prevent moisture, dust and debris from penetrating for reliable performance in all environments

User questions & answers

Question:	will this fit on a Glock 41 MOS without removing the rear sight
Answer:	5.2 ounces
Question:	Is this sight's brightness fully adjustable
Answer:	Yes, I have a old one which works perfectly with this red dot. I think most picatinny rail quick detach devices will work with this.
Question:	Installing this on a fnx 45 tactical, does that require any additional mounting hardware or is it a dirrect fit
Answer:	There is a description of what this means in the product details. It basically means, there are 2 ultra low settings that are not visible to the naked eye but visible through NV goggles or similar device. I have not tried it.
Question:	Does this have a rail mount on it? Will it attach to a standard rail
Answer:	yessir

Product description

Ready to handle any environment, the SPARC features tough construction with a compact and lightweight form-factor. The 2 MOA dot is as easy as point and shoot—it’s quick to acquire in close-quarters scenarios, but fine enough to promote pin-point accuracy at extended ranges. A unique, integrated base is hassle-free for some rifle platforms. For excellent, reliable performance and loads of user-friendly features, look no further than the SPARC.

• The updated SPARC features rugged construction that’s still compact, with a lightweight form-factor. The 2 MOA dot is as easy as point and shoot - it’s quick to acquire in close-quarters, but fine enough for pin-point accuracy at extended ranges.
• With up to 700 hours of battery life on the highest setting, 50, 000 hour on its lowest, and night-vision compatibility at the lowest two settings, the SPARC red dot will keep working in a variety of conditions.
• Increased light transmission with multiple anti-reflective coatings on all air-to-glass surfaces. Unlimited eye relief for rapid target acquisition. 12 illumination settings allows shooters to change the dot intensity to the situation at hand.
• Highly durable hard-coat anodization provides a low-glare matte surface and helps camouflage position. A unique, integrated base with multi-height mount system allows for either absolute co-witness or lower 1/3 co-witness mounting on rifle platforms.
• O-ring seals prevent moisture, dust and debris from penetrating for reliable waterproof performance in all environments. Rugged contruction of single piece chasis keeps the sight compact and lightweight while still withstanding recoil and impact.

User questions & answers

Question:	Does this have a laser sight on it
Answer:	It is visible but is not in view when looking through sight.
Question:	I lost the adjustment caps for elevation and wind age. Is there a way to get a new pair
Answer:	The shape of the body is more streamlined, and improved dials and dial caps. Also longer batt life.
Question:	Does the AR gen 2 have the same glob of glue holding the emitter in place that is obstructing the view? Or did they do away with that issue
Answer:	Yes
Question:	What’s the difference between Gen 1 and Gen
Answer:	Get a Holosun 507c instead. The 510c is meant for rifles. I personally have a 507c v2 on my glock 17. Fits Trijicon RMR footprint too.

Product features

Daylight Bright Red Dot Reticle

The daylight bright 2 MOA dot is fast and easy to use. Choose among ten variable illumination settings—the lowest two settings are night-vision compatible.

The key thing to remember when shooting with the SPARC Red Dot is to keep both of your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical.

Windage and Elevation Adjustments

The SPARC red dot incorporates elevation and windage dials with audible clicks. Each small click will move the point-of-impact one Minute of Angle (MOA). 1 MOA will closely correspond to one inch at 100 yards, 1/2 inch at 50 yards, 1/4 inch at 25 yards, etc.

Elevation Adjustment

Remove the turret cap and turn the inner screw counter-clockwise to adjust the bullet’s point-of-impact up; turn the inner screw clockwise to adjust bullet’s point-of-impact down.

Windage Adjustment

Remove the turret cap and turn the inner screw counter-clockwise to adjust the bullet’s point-of-impact to the right; turn the inner screw clockwise to adjust windage bullet’s point-of-impact to the left.

Mounting the SPARC Red Dot

The SPARC Red Dot can be mounted at two heights, lower 1/3 co-witness and absolute co-witness. To mount it at lower 1/3, mount the sight as received. The optic center will be 40mm above the base surface. To mount for absolute co-witness you can remove the 3mm base shim. The optic center at absolute co-witness will be 37mm above the base surface. To change the mount height, loosen and remove the four base screws and remove the base clamp along with the 3mm shim. Reinstall the base clamp with the four shorter screws supplied with your Red Dot.

• The Impact 1000 features an intuitive platform with angle compensation; perfect for bowhunters and range-day lovers. Range targets down to five yards out, with the ability to stretch out to 1,000 yards if need be.
• The primary HCD mode displays an angle compensated distance that is ideal for the majority of hunters and shooters. An advanced LOS mode provides the option to calculate long distance, high angle shots with increased precision.
• A scan feature gives continuous range readings to pan across a landscape or track a moving target. All modes can be set to read in yards or meters.
• The diopter located on the eyepiece adjusts for differences in a user's eyes. Added 6x magnification brings targets in for a closer look and more accurate ranging.
• Fully multi-coated optics enhance light transmission in low light settings. Waterproof and shockproof performance keep you in the hunt no matter what the conditions.

User questions & answers

Question:	Does this come with a carrying case and or lanyard
Answer:	It is more suitable for children or teenagers than beginners.
Question:	where is it made
Answer:	Lots of room for hitting golf balls for width (10ft). The net is 7 feet high so easy to hit balls over with a wedge or short iron but it depends how far away you stand from the net.
Question:	Does this come with the VIP warranty
Answer:	No tools needed. It is very easy after the first time
Question:	Is this unit water proof
Answer:	No problems so far and has been up 24/7 since purchased.

Product features

Impact 1000 Laser Rangefinder (LRF101)

When all you need is an intuitive platform with angle compensation–we're looking at you, bowhunters and range-day lovers–the Impact 1000 is all the rangefinder you need and then some. If things get up close and personal, range targets down to five yards out, with the ability to stretch out to 1,000 yards if need be. Lightweight and simple to operate, the Impact 1000 gets you on target fast meaning you can no longer justify going into the field without a laser rangefinder.

HCD (Horizontal Component Distance) Mode

The Impact 1000’s HCD range display is intended to be the primary mode—used for most rifle and archery shooting conditions. The yardage number displayed is the critical horizontal component distance.

Use the HCD range mode in the following situations:

• Rifle shooting on level ground at any range.

• Rifle shooting out to ranges of 800 yards with mild slopes (less than 15 degrees).

• Rifle shooting out to ranges of 400 yards with moderate slopes (15 to 30 degrees).

• For all archery shooting.

The displayed HCD yardage number is corrected for shot angle and needs no extra user input; shooters simply use the appropriate level ground bullet drop and wind adjustment for the range displayed and shoot. Archers use the appropriate level ground sight pin for the range displayed and shoot.

LOS (Line of Sight) Mode

The Impact 1000’s LOS (Line of Sight) mode is intended for rifle shooters who are using slope correcting ballistic drop data cards, ballistic cell phone applications, or other ballistic programs and who are shooting at distances beyond 500 yards and with slopes greater than 15 degrees. Most shooters and archers will not need the LOS mode.

The range number displayed in LOS mode is the actual line of sight range with no ballistic correction for slope. Most of the commonly used ballistic devices can provide independent slope correction for bullet drop data and require actual line of sight range input. Using the LOS range when calculating bullet wind drifts under these steep slope/long range conditions will provide a higher degree of accuracy than using the HCD range.

To use, simply input the LOS range number into the electronic device or use the LOS range when referencing ballistic drop cards with slope correction.

Scan Feature

The Scan feature can be used to range moving targets or help range smaller targets on uniform backgrounds in either HCD or LOS modes. Once powered up, press and hold the Measure button and scan the laser back and forth, watching for changes in the yardage number as the crosshairs move across the target object. A blinking 'S' display indicates Scan Ranging is activated.

Product description

Make your rifle, pistol, or shotgun even better with the Venom Red Dot sight. Choose 3 MOA for rapid target acquisition or precise point of aim. The durable, machined aluminum housing ensures the unit will stand up to whatever you throw at it. Top-load system makes changing the CR1632 battery a snap and alleviates the need to remove the sight when switching the power source. The power and dot intensity controls are conveniently located on the left side of the unit. Flush 1 MOA windage and elevation adjustments are super sleek and make sighting-in a breeze.

• The Venom Red Dot Sight-3 MOA promotes rapid target acquistion while providing a precise point of aim; getting shots down range and on target fast. The Venom's aluminum housing ensures this unit will stand up to whatever you throw at it.
• High quality, fully multi-coated lens offers a clean, wide field of view. Power and dot intensity controls are conveniently located on the left side of the sight to choose between 10 brightness levels.
• The Venom also has an auto-brightness mode that uses an ambient light sensor to control dot intensity if the shooter prefers.
• 1 MOA windage and elevation adjustments are super sleek and make sighting in a breeze. The top load system makes chaging the CR1632 battery a breeze, as you will not have to remove your sight to change the power source.
• Venom Red Dot will fit well on your rifle or shotgun giving you optimal flexibility. Vortex Optics hat included, hat color may vary.

User questions & answers

Question:	Will this hold up to the recoil of a .454 casull
Answer:	Yes
Question:	can this be adapted to dove tail mount on kahr PM
Answer:	No, but you can.
Question:	Will this fit the cutout on the S&W performance center 9mm 5 inch ported? The gun comes with tall sights from factory
Answer:	Yes, the teak oil protects it. Just like similar furniture, when it starts to turn gray, wash/dry and apply more teak oil
Question:	Does it come with the Picatinny mount
Answer:	No, it does not just an Allen wrench did the job!

Product features

Venom Red Dot — 3 MOA Dot (VMD-3103)

Make your rifle, pistol, or shotgun even more poisonous with the Venom Red Dot sight. A 3 MOA dot promotes rapid target acquisition, while providing a precise point of aim—getting shots down range and on target fast.

The durable, machined aluminum housing ensures the unit will stand up to whatever you throw at it. High-quality, fully multi-coated lens offers a clean, wide field of view. Our top-load system makes changing the CR 1632 battery a snap and alleviates the need to remove the sight when switching the power source. The power and dot intensity controls are conveniently located on the left side of the unit. Flush 1 MOA windage and elevation adjustments are super sleek and make sighting in a breeze.

The Venom comes with a Picatinny mount—weighs 1.6 ounces with mount.

3 MOA Dot Reticle

The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background. Choose between 10 levels of brightness in manual mode or switch to auto mode. Up to 150 hours of use at highest setting. Use at lower settings can allow up to 30,000 hours.

Windage & Elevation Adjustments

The Venom features adjustable elevation and windage dials with 1 MOA clicks. To adjust the elevation and windage settings, turn the dials up or down or left or right as indicated by the arrows.

Mounting the Venom

The Venom red dot is shipped from the factory with a low rail mount that clamps to a slotted spec base rail. In addition to the supplied low rail mount, an optional riser mount places the Venom red dot at correct height for rifles.

1. Attach the low rail mount to the Venom using the included screws.

2. Attach the Venom to the base rail, making sure the recoil lug is solidly seated in the base groove.

3. Check to see that the clamp is fully down and hooked around the outside of the base.

4. Press the Venom down and forward toward the muzzle and firmly tighten base clamp screw using large coin or flat blade screwdriver.

Product description

Clear, tough and bright, our popular Crossfire II, 1-inch tube riflescopes are built for performance. Long eye relief, a fast-focus eyepiece, fully multi-coated lenses and improved, resettable MOA turrets are hallmarks of the series.

• The 2-7x32 Crossfire II riflescope is one of many configurations in the Crossfire II line. The Dead-Hold BDC reticle is good for hunting/shooting at varying ranges where estimating holdover is a concern
• With long eye relief and an ultra-forgiving eye box, you'll be able to quickly get a sight picture and acquire your target. The fast focus eyepiece allows quick and easy reticle focusing
• Anti-reflective, fully multi-coated lenses provide bright and clear views for the user; Max Elevation Adjustment: 60 MOA
• Capped reset turrets are finger adjustable with MOA clicks that can be reset to zero after sighting in
• A single piece tube constructed from aircraft grade aluminum ensures strength and shockproof performance. O-ring sealed and nitrogen purged, the Crossfire II delivers waterproof and fogproof performance

User questions & answers

Question:	Will low height rings fit this scope & a remington
Answer:	Yes this will fit with a low height rings on a Remington 700! I have one mounted on a Remington 700 bdl
Question:	Is it good in dark areas
Answer:	Me owning both a 44mm and a 50mm I’d say if you want one for lower light go 50mm. I’ve heard that it doesn’t matter but like I said i have both.. the 50mm you can see earlier in the morning and later into the night.. only down side is if your facing a sun rise or a sun down the 50mm absorbs to much light causing a glare.. you can buy a screw in extender that takes care of that tho.. hope That helped
Question:	will this scope hold up to the pounding of the AK47 recoil
Answer:	This is an amazing scope. Like the others have said handling a 416 rigby and a 338 win mag itll hold up to the 7.62x39 for sure. I know ur thinking probably about the continual jarring of a semi automatic but this scope holds up just fine. Best thing is u cant go wrong with vortexes warranty. I have two a 2-7x32 on my 375 HH, and a 3-9x40 on my .30.06, and only had one issue on the 3-9x40 from a shooting trip after i got it home i guess it got knocked around too hard and there was like dirt inside of the glass. I called vortex they sent me a sgipping label and said well fix it ir replace it and in a week or two i got my scope back good as new. I love vortex the scopes are great, and the customer service cant be beat.
Question:	Does this scope come with flip up scope covers? If not, any recommendations
Answer:	The scope does not come with flip up scope covers. I purchased Butler Creek ones and they work great. For the eye piece go with size 14-15-16 (their sizing is weird) and for the objective go with 13-15. They work great and I have no complaints.

• Use this 45 degree offset Pica tinny mount in conjunction with a red dot sight, laser, flashlight, sling or open sights.
• Mounts to any 1913 Mil Spec rail.
• Lightweight and durable machined aluminum construction.
• Sport type: Hunting

User questions & answers

Question:	Can this be mounted on the left side
Answer:	Yes it can. That's exactly how I mounted mine.
Question:	How far away from your eye (minimum and max) can you mount red dot
Answer:	I am no expert but you can mount the optic as far away as you want. If it is too close you might take it in the eye when the trigger is pulled, but you’ll also run into more MOA the further away it is.
Question:	what size hex wrench does it take to install or does it come with one
Answer:	It comes with everything you need to install it.
Question:	How many sections does it take up on the rail
Answer:	I think 2 or 3.

Product description

The Razor HD 4000 is the essential companion for the extreme Hunter, archer and shooter. The extremely effective angle compensated laser rangefinder features four targeting modes (normal mode, first mode, last mode and extended laser range mode) for any ranging environment. The primary HCD (horizontal component distance) range mode provides key angle compensated range information required by the vast majority of shooters in a simple, quick to read display. The razor HD 4000 also has a Los (line of sight) range mode and scan feature.

• The Razor HD 4000 with 7x magnification and a 25mm objective lens is the essential companion for the extreme hunter, archer and shooter. Tripod Adapter compatible allows the Razor to be used on a tripod or car window mount.
• The Razor provides four target modes (Normal, first, last and extended laser range) and two range modes (had and Los). the scan feature displays continual distance readings when panning across a landscape or tracking a moving animal.
• All weather capable ranging allows the unit to return a distance even in adverse weather conditions. Intuitive, easy-to-use menus feature a simple, clean illuminated display and allow for ranging in yards or meters
• HD Optical System delivers exception resolution and outstanding color fidelity, sharpness, and light transmission. X plus Fully multi-coated lenses provide maximum light transmission for peak clarity and pinnacle low-light performance.
• Built to handle tough situations The Razor uses Armorer coating to protect the lenses while rubber armor provides a secure, non-slip grip and durable external protection. O-ring seals ensure waterproof performance.

User questions & answers

Question:	Does this rangefinder have a measuring scale in it like the leupold trophy scale
Answer:	The lens is 55mm.
Question:	Put a primary arms slx 1-6x24 sfp illuminated gen 111 and a precision ultralight 30mm mout on ruger 10-22 22LR
Answer:	Not sure...but it works. However there can't be any twig or channelling fan sir any little tiny thing in the line of the laser music and hit any tiny branch and give you a false reading so you need a clear shot from you to the target.
Question:	Is it waterproof IPX7 rated
Answer:	I've had it register at 1.5 yards. Not sure you would need it any closer...
Question:	Does it have Bluetooth
Answer:	I think its 5 years on the range finder.

Product features

Razor HD 4000 Laser Rangefinder (LRF-250)

When “as far as the eye can see” isn’t good enough, you need the Razor HD 4000. The definition of what a high-end, long-range laser rangefinder should be, the Razor HD 4000 delivers cutting-edge ptical and ranging performance, giving hunters and shooters the data needed to execute even the most demanding shots. This extremely effective, angle-compensated rangefinder features four targeting modes and two ranging modes to cover any environment. Impressive 4,000 yard reflective ranging capability (ELR mode) reaches way out for extreme precision. A utility clip keeps these compact units close at hand, and each model is easily mounted to any 1/4-20 tripod plate when you need a rock-steady base.

Normal Mode

Your Razor HD 4000 comes preset to normal target mode. This is the standard mode providing the range of the target with the strongest range result. Normal Mode is the recommended target mode for most situations.

First Mode

Locks in and displays the closest distance when panning and scanning. This mode is ideal for ranging a smaller target in front of other larger or more reflective objects.

Note: If unsure about the range, simply release the measure button and range again.

Last Mode

Locks in and displays the farthest distance when panning and scanning. This mode is ideal for ranging a specific target behind a group of objects like brush, trees, rocks, etc.

Note: If unsure about the range, simply release the measure button and range again.

Extended Laser Range Mode

The ELR target mode allows for ranging smaller, less reflective targets at extended distances. It is ideal for ranging when Normal Mode is unable to obtain a desired range. A longer response time may be required to build the desired range. For best results, it is recommended to be used on a tripod.

• The Ranger 1800 rangefinder is easy to use and features a clean, illuminated display and highly intuitive menu. The Ranger 1800 is capable of ranging up to 1,800 yards.
• The primary HCD mode displays an angle compensated distance that is ideal for the majority of hunters and shooters. An advanced LOS mode provides you the option to calculate long distance, high angle shots with increased precision.
• A scan feature gives continuous range readings as you pan across a landscape or track a moving target. Three brightness settings allow the display to stay visible in various light conditions.
• Fully multi-coated lenses deliver optimal light transmission. Textured rubber armor provides a secure, non-slip grip. Water and fogproof performance keep the system operating in the harshest conditions.
• The included neck lanyard and removable utility clip make the Ranger easy to pack and keep handy. Compatible with a tripod adapter, allowing use on a tripod or car window mount.

User questions & answers

Question:	Does it have a black display? I just can't see black in low light does anyone know of one that has a different color display
Answer:	Yes, it shows angle.
Question:	Does it range through blind window mesh
Answer:	Yes, scope were holding reticle on magnum calibers with hold over up too 1100 yards
Question:	Can it range in the dark -- if yes to what ranges? If not, can it range in very-low-light as would be encountered when the sun first breaks on hunt
Answer:	No. You will need to buy scope rings for separate. Contessa QD Rings 40 mm, Picatinny Rail
Question:	If it has a lifetime guarantee/warranty why would you need to buy a 2 or 3 year protection plan
Answer:	I bought the DS in Dec19/Jan20... unsure of DS MK2. Either way if you have the funds for this optic, you wont be unhappy. This is a dream scope... large, heavy looking, but AWESOME.

Product features

HCD (Horizontal Component Distance)

HCD range display is intended to be the primary mode. The yardage number displayed is the critical horizontal component distance is corrected for shot angle and needs no extra user input. Use the HCD range mode in the following situations:

•Rifle shooting on level ground at any range.

•Rifle shooting out to ranges of 400 yards with moderate slopes (15 to 30 degrees) or out to ranges of 800 yards with mild slopes (less than 15 degrees).

•For all archery shooting.

Shooters simply use the appropriate level ground bullet drop and wind adjustment for the range displayed and shoot. Archers use the appropriate level ground sight pin for the range displayed and shoot.

LOS (Line of Sight)

LOS mode is intended for rifle shooters who are using slope correcting ballistic drop data cards, ballistic apps, or PDAs with ballistic programs and are shooting at distances beyond 500 yards and slopes greater than 15 degrees. Most shooters and archers will not need the LOS mode. The range number displayed in LOS mode is the actual line of sight range with no ballistic correction for slope.

Most of the commonly used ballistic devices can provide independent slope correction for bullet drop data and require actual line of sight range input. Using the LOS range when calculating bullet wind drifts under these steep slope/long range conditions will provide a higher degree of accuracy than using the HCD range. To use, simply input the LOS range number into the device or use the LOS range when referencing ballistic drop cards with slope correction.

Scan Feature

The Scan feature can be used to range moving targets or help range smaller targets on uniform backgrounds in either HCD or LOS modes.

Once powered up, press and hold the Measure button and scan laser back and forth, watching for changes in the yardage number as crosshairs move across the target object. A blinking 'S' display indicates Scan Ranging is activated.

• The Razor Red Dot Sight-6 MOA is designed to be mounted to a wide variety of firearms and used in various shooting applications. The Razor was designed so shooters have unlimited eye relief for easy target acquisition.
• A premium wide field lens gives the shooter an impressive field of view. The daylight bright red dot has nine illumination levels allowing shooters to find their ideal brightness setting and easily adjust if conditions change.
• Anti-reflective XR coatings on the lenses increase light transmission for maximum brightness while Armortek coatings protect the lenses from oil and scratches.
• O-ring sealed and a rugged one piece chasis constructed from aircraft grade aluminum ensure waterproof and shockproof performance.
• The Razor runs off a single CR2032 battery which can be easily switched in and out.

User questions & answers

Question:	Does this optic have a motion activated on feature like that of a Trijicon rmr or Sig Romeo
Answer:	No, the plastic lenses that come with the frames are non-corrective. You take the frames to your vision store and pay to have corrected lens put on these frames.
Question:	would this fit on the fnx tactical and handle the recoil of 45acp
Answer:	Hello,Please note that we do guarantee all of our items 100% authentic, direct from the manufacturer, brand new, and in unused condition. That being said, the manufacturer for Ray-Ban does have two plants, one in China and one in Italy. There is no real knowing which plant a specific item was made in until an order has been placed and we have the item on hand. If you would like, you can place an order with us, Designer Eyewear, and message us once you have placed your order, letting us know that you would like to know where the item was manufactured before shipping the item out. Have a nice day!Designer Eyewear
Question:	does this scope have night vision capability
Answer:	The product was originally made in Italy, and some still are but a lot of Ray Ban products are made in China now as well as Italy. They have (fairly recently) built a manufacturing plant in China and now the clubmaster models are exclusively made in that particular plant. But I assure you it is of the same quality.
Question:	Does this work with a weaver rail
Answer:	Hello,Please note that we do guarantee all of our items 100% authentic, direct from the manufacturer, brand new, and in unused condition. That being said, the manufacturer for Ray-Ban does have two plants, one in China and one in Italy. There is no real knowing which plant a specific item was made in until an order has been placed and we have the item on hand. If you would like, you can place an order with us, Designer Eyewear, and message us once you have placed your order, letting us know that you would like to know where the item was manufactured before shipping the item out.Have a nice day!Designer Eyewear

Product features

Razor Red Dot - 6 MOA Dot (RZR-2003)

The high-end Razor is a reflex sight built for top-tier performance and incredible versatility. The highly polished glass is clear and crisp from edge to edge. Exceptional resolution and a wide field of view present a sight picture sure to impress. The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background. Fast and accurate, clear, compact, durable and dependable-the Razor red dot is a sight worthy of the Razor name. The Razor comes with a Picatinny mount-weighs 2.5 ounces with mount.

6 MOA Red Dot Reticle

The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background. Nine levels of brightness settings can be used up to 150 hours of use at highest setting and at lower settings can allow up to 30,000 hours.

Windage and Elevation Adjustment

The Razor features adjustable elevation and windage dials with 1 MOA clicks.

To adjust the elevation and windage settings:

1. Loosen the Adjustment Lock Screw 1 1/2 turns.

2. Turn adjustment dials in the appropriate Up/Down or Left/Right direction as indicated by arrows.

3. Re-tighten lock screw after making adjustments.

Mounting the Razor

Included Picatinny Rail Mount

The Razor red dot is shipped from the factory with an installed low rail mount that clamps to a Picatinny spec base rail.

1. Attach the Razor to the Picatinny base rail, making sure the recoil lug is solidly seated in the base groove. Adjustment side of Razor should face the shooter.

2. Check to see that the clamp is fully down and hooked around the outside of the base.

3. Press the Razor down and forward toward the muzzle and, using the supplied hex wrench, firmly tighten down the clamp screw.

Additional Mounting Options

In addition to the supplied low Picatinny rail mount, other mounting base options are available for the Razor red dot. These include Weaver spec base rail clamps, custom handgun mounts, and riser mounts.

1. Remove the supplied Low Mount Clamp Base before mounting the Razor red dot to other bases.

2. Use the Mounting Shim (a custom adapter plate) when adapting the Razor to specialized red dot bases from other companies.

Product description

Offering 3x magnification along with durable construction, the Vortex VMX-3T with included Flip Mount can quickly add extended range ability to red dot sights. The VMX-3T is easy to use and does not require any special sight-in—just zero-in the red dot as normal and add the VMX-3T behind for additional 3x magnification.

• The VMX-3T Magnifier and Flip Mount combo adds a 3x magnification to your rifle's red dot sight. Simple, fast, and effective, the push button design engages and disengages the flip mount allowing the magnifier to lock in at your desired position.
• The lenses are fully multi-coated maximizing resolution, light gathering capability, and color fidelity. The VMX-3T gives you a generous 3.25 inches of eye relief with a 38.2 foot field of view at 100 yards.
• The VMX-3T does not require any special sight-in. The dot centering screws can be used to help center your red dot image in the VMX-3T's field of view.
• The magnifier is nitrogen purged for reliable waterproof and fogproof performance in the field.
• Allows for lower 1/3 or absolute co-witness mounting heights and is ideal for shooters who want to increase the effective range of their red dot sight. Vortex Optics hat included, hat color may vary.

User questions & answers

Question:	I have the strike fire 2 with the cantilever mount. Will this line up evenly? Does it need a riser mount
Answer:	Dear Margie C. Herbion Naturals Cough Drops contain cane sugar. If you have any other queries, please let us know. Regards, Herbion Naturals Team
Question:	Will this work with the votex spac ii
Answer:	Dear Customer, Here are the basic Nutritional Facts of one Cough Drop: Calories 9, Carbohydrates 2g, and Sugar 1.3g. If you ever require any assistance, we would be happy to hear from you. Regards, Herbion Naturals Team
Question:	Will this work with the Sig Sauer Romeo 5 red dot
Answer:	They have a very distinct taste to them. You can definitely tase On Guard in them, but they also taste like a little bit of cinnamon and maybe clove. Very soothing on your throat and will definitely suppress your cough.
Question:	Will this line up with vortex strikefire ii the cantilevered red dot? thx
Answer:	Hey thanks for reaching out to me! The Ongruard Throat Drops are effective for both sore throats and coughs. Also the Breathe Drops are very effective at soothing Coughs. I hope I was able to be of help. If you have any other questions please feel free to ask! Thanks.

Product features

VMX-3T Magnifier & Hat

Simple, fast, effective-the VMX-3T Magnifier will work with any of our red dots but it is not recommended for use with the prism scopes. The push-button design of the VMX-3T engages and disengages the flip-mount, allowing the magnifier to lock in place. The result, 3x magnified or unmagnified views at will. Optics are fully multi-coated for optimal light transmission. Lightweight and tough; hard-coat-anodized machined-aluminum construction ensures durability. Internally nitrogen purged for reliable waterproof/fogproof performance. Ultimate magnified versatility for virtually any red dot sight.

Allows for lower 1/3 or absolute co-witness mounting heights and is ideal for shooters who want to increase the effective range of their red dot sight.

Red Dot Image

The dot-centering screws can be used to help center the red dot in the VMX-3T’s field of view. After the VMX-3T is mounted in front of red dot scope, the dot may seem off-centered while viewing through the VMX-3T. This will not affect the point-of impact. If desired, the centering screws can be used to move the dot up/down or left/right until the dot is more centered.

Adjust the Focus

Use the focus knob to achieve a sharp image. Turn the focus dial clockwise or counter-clockwise until image is as sharp as possible.

Using the Flip Mount

To use the included flip mount, simply push on the release button and flip the VMX-3T off to the side.

Product description

When your rifle, shotgun or rimfire just needs a simple point of aim and none of the frills, the Crossfire should be at the top of your list. The 2 MOA dot is quick to acquire in close-quarters scenarios, while remaining fine enough to promote pin-point accuracy at extended range. In addition to looking awesome, the included skeletonized lower 1/3 co-witness mount provides a rock-solid and extremely lightweight platform for your red dot. The Crossfire is a no-nonsense sight for near any application. Offering 3x magnification along with durable construction, the Vortex VMX-3T with included Flip Mount can quickly add extended range ability to red dot sights. The VMX-3T is easy to use and does not require any special sight-in—just zero-in the red dot as normal and add the VMX-3T behind for additional 3x magnification.

• The updated Crossfire red dot is a no-nonsense sight for near any application when you need a simple point of aim. Pair with a VMX-3T to add 3x magnification by the push of a button, engaging the flip mount allowing the magnifier to lock in.
• The 2 MOA dot is quick to acquire in close-quarters, while remaining fine enough to promote pin-point accuracy at extended range. The VMX-3T does not require any special sight-in.
• With up to a 50,000 hour battery life and night-vision compatibility at the lowest two settings, the sight will keep working in a variety of conditions. 11 illumination settings allows shooters to change the dot intensity to the situation at hand.
• Allows for lower 1/3 or absolute co-witness mounting heights and is ideal for shooters who want to increase the effective range of their red dot sight.
• The lenses on both optics are fully multi-coated maximizing resolution, light gathering capability, and color fidelity. O-ring seals on both optics prevent moisture, dust and debris from penetrating providing reliable water and fogproof performance.

User questions & answers

Question:	can this be mounted to flip to the right instead of the left
Answer:	there is a rayban hard case and cleaning cloth. It did not include the original rayban box though.
Question:	Which goes first the magnifier or red dot and why
Answer:	This model comes in Shiny Black and its frame is more polished.
Question:	What is the country of origin
Answer:	The item 100% authentic directly from Rayban we are A distributor therefore are cheaper than retail
Question:	What type of batteries does this use
Answer:	The frames are suitable for prescription lenses. As for the Return Policy, a 5% re-stocking fee will be applied if you decide to return your order within 30 days. Thank you!

Product features

Reticle

The daylight bright red dot is easy to see and paints targets regardless of lighting conditions or background.

The key thing to remember when shooting with the Crossfire Red Dot is to keep both of your eyes open! Shooting with both eyes open allows you to take full advantage of your peripheral vision to get on target very quickly. Eye placement is not critical.

Windage & Elevation

Remove the turret cap and use the raised bar on the cover or a coin to turn the adjustment dial. Move the dials in the direction you wish the bullet’s point-of-impact to change. Turning the elevation turret counter-clockwise will raise the elevation. Turning the windage turret clockwise will move the point of impact to the left.

Mounting the Crossfire Red Dot

The Crossfire Red Dot can be mounted on a variety of platforms using the high mount or low mount.

• Attach the unit to the rail/base with the illumination dial positioned on the right side.
• Make sure the mount is solidly seated in the base groove. In order to prevent recoil injury, position the Red Dot so you have at least four inches of eye relief.
• Be sure the base clamp is hooked around the outside of the rail/base.
• Press the Red Dot downward and forward toward the muzzle. Then, firmly tighten the base clamp bolt using the hex wrench.

Red Dot Image

The dot-centering screws can be used to help center the red dot in the VMX-3T’s field of view. After the VMX-3T is mounted in front of red dot scope, the dot may seem off-centered while viewing through the VMX-3T. This will not affect the point-of impact. If desired, the centering screws can be used to move the dot up/down or left/right until the dot is more centered.

Adjust the Focus

Use the focus knob to achieve a sharp image. Turn the focus dial clockwise or counter-clockwise until image is as sharp as possible.

Using the Flip Mount

To use the included flip mount, simply push on the release button and flip the VMX-3T off to the side.

Mounting the VMX-3T Magnifier

Using the included screws, attach the VMX-3T magnifier to the Flip Mount. Ocular lens and Release Button should face shooter.

Absolute Co-Witness Height with Flip Mount

Positions the VMX-3T at 37 mm from the base surface to the center of the optic. This puts the dot height at a center (absolute) sight picture when co-witnessed with standard iron sights. For this height, do not install the included shim plate.

Lower 1/3 Co-Witness Height with Flip Mount and Shim Plate

Positions the VMX-3T at 40 mm from the base surface to the center of the optic. This puts the dot height at a lower 1/3 sight picture when co-witnessed with standard iron sights. For this height, install the included shim plate between the VMX-3T and the Flip Mount.