2 best rail mounts for scopes

Rail mounts for scopes are an essential component in the realm of gun accessories, particularly within the context of firearm optics, airsoft, and paintball. These mounts are utilized to securely attach scopes or optics to firearms, enhancing accuracy and targeting capabilities.

There are several types of rail mounts, each compatible with specific firearms and intended purposes. The most common types include:

  1. Picatinny Rail Mounts: The Picatinny rail system is standardized and widely adopted, featuring evenly spaced slots to accommodate various accessories, including scopes. These mounts provide a secure and versatile platform for attaching optics.

  2. Weaver Rail Mounts: Similar to the Picatinny rail, the Weaver rail system is widely used for mounting scopes and other accessories. However, it has a slightly different slot design compared to Picatinny, so compatibility may vary.

  3. Dovetail Rail Mounts: Dovetail mounts are commonly found on air rifles and some firearms. They utilize a dovetail-shaped groove to secure the mount to the firearm, ensuring stability and alignment.

  4. RIS (Rail Interface System) Mounts: RIS is a broader term that encompasses various rail systems, including Picatinny and Weaver.RIS mounts are designed to be versatile and compatible with different rail types, providing flexibility in scope attachment.

  5. Quick-Release Mounts: These mounts allow rapid attachment and removal of scopes, providing convenience for users who frequently switch between optics or need to maintain a low profile when not using them.

When selecting a rail mount, it's crucial to consider factors such as the type of firearm, the type of rail it has, the size and type of the scope, and the intended use (e.g., hunting, competitive shooting, airsoft). Additionally, ensuring a proper fit and compatibility between the mount and the firearm's rail system is essential for a secure and reliable setup.

Below you can find our editor's choice of the best rail mounts for scopes on the market
  

Evolution Gun Works Savage Round Back Short Action Picatinny Rail Scope Mount 0 MOA (41000)

Evolution Gun Works

Based on 205 reviews Check latest price

Product description

EVOLUTION GUN WORKS SAVAGE ROUND BACK SHORT ACTION PICATINNY RAIL 0 MOA. Rail Type: One Piece Picatinny. Machined from: Domestic 6061 T6 Extruded Aluminum. Finish: Matte Black Anodizing. Center Spread: 3.930"". Overall Length: 6.670"". Height: .4"" (Top of Receiver to Top of Picatinny). Weight: 2 oz. Quick Disconnect Ring Compatible: No. Ambidextrous: Yes. Torque Specs: 20 in/lbs. Minute of Angle: 0 MOA. Action Length: Short Action. Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included. This Savage base will work with any short action round back Savage with an ejection port. It is also compatible with the Stevens short actions. The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. This mount comes standard with a bevel on both sides making it ambidextrous. The entire mount and accessories are made in the USA.

  • Rail Type: One Piece Picatinny
  • Machined from: Domestic 6061 T6 Extruded Aluminum
  • Finish: Matte Black Anodizing
  • Center Spread: 3.930"
  • Overall Length: 6.670"

User questions & answers

Question: Will this fit a Stevens
Answer: Dear Customer, the max weight capacity is 250lbs
Question: Mounting a vortex 6-18x44 with med. rings. Am I gonna have enough, or too much clearance? For the rail, is there front or rear
Answer: The largest won’t fit a 420-800 lens.
Question: Will this fit a savage model 99E
Answer: No. It is a set of all 4.
Question: Will this fit my savage axis
Answer: the outside is 10*7 ,14*9 ,21*9,25*9 cm
Question: will this fit the Savage axis
Answer: I have a 100-300mm and there is about two inches free space above it . Hope this helps .
Question: Is this the right mount for my Savage model 93 bolt action
Answer: If it has a hot shoe it will work.
Question: is this the right piece for savage axis/edge
Answer: These are a piece of junk. Mine worked the first time I used them and havn't worked since.
Question: I don't understand... What advantage is there in me installing this
Answer: Will work with the two manual speedlights. There is no TTL support with these triggers. You will need to change the the ettl flash to manual for it to work.

Product features

Weaver Savage Axis 48347 Multi Slot Mounting Base Aluminum

These versatile bases from Weaver help give your gun a versatile edge. Multi Slot Bases are constructed of tough, lightweight Aluminum so they can withstand the powerful recoil. They accept all Weaver Top Mount Rings and accommodate the mounting of devices such as scopes, red dots and laser optics, while allowing for optimal eye relief.

Bevel on both sides making it ambidextrous

This Savage base will work with any short action round back Savage rifle with an ejection port.

The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger. Savages without an accu-trigger will require our flat back mount (listed separately).

The middle spread is the distance between the two middle holes, center to center, on your receiver.

Machined from: Domestic 6061 T6 Extruded Aluminum.

Finish: Matte Black.

Hardware: Hex head screws and wrench provided.

Center Spread: 3.930".

Overall Length: 6.670".

Picatinny-style base - compatible with Picatinny or Weaver scope rings

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories.

The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average.

Also, in many cases, it will not obstruct usage of factory iron sights.

EGW's one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).

Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 30 mm Diameter

Monstrum

Based on 1 reviews Check latest price
  • Dual ring scope mount for mounting standard 30 millimeter diameter tube rifle scopes
  • Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
  • Mounts to any flat top Picatinny rail equipped rifle
  • 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
  • 5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

User questions & answers

Question: Is the finish on this mount smooth and shiny black to match my primary arms scope? Or is it a chalky matte black
Answer: Very east to recline, just put part of you foot on the bottom leg of the back of the chair and pull the back bar of the chair slightly up and back; then repeat with the other side.
Question: Will this fit a Vortex Strike Eagle 1-6x
Answer: Dear Customer, this gaming chair doesn't have a massage function. Our other gaming chair comes with a USB massage lumbar pillow: https://www.amazon.com/dp/B08SHZY7Y5/
Question: Will it fit a 50mm objective scope
Answer: Dear Customer, the armrests are about 20cm away from the seat surface.
Question: I've got a 12gage winchester modle1200 need the mounting bar for a scope do you have an
Answer: For me is easy. The chair comes with manul and necessary tools

Latest Reviews

View all