8 best rail mounts for marlin rifles

• Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles
• Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required
• Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics
• 5 inches or 11 rail slots in length, allowing for flexible placement of optics for optimum eyerelief and cheek weld
• All Monstrum scope mounts and accessories come with a lifetime guarantee

Product description

Machined From: *The center spread is the distance between the two middle holes, center to center, on your receiver. 061 T6 Extruded Aluminum Finish: Matte Black Anodized Mounting Hardware: Hex Head Screws and Wrench Provided Center Spread: 2.75" Overall Length of Mount: 5.094" This scope base fits the following: Marlin 1895, 336, 444, Model 36, Glenfield 30, Henry 3030(H009), Henry 4570(H010), Camp Carbine 9mm, and the Camp Carbine 45. This base sits at approximately 0.4” high. This will also fit the Camp Carbine 9mm and Camp Carbine .45 ACP. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings.

• Made in the USA
• Will not obstruct usage of factory iron sights
• Picatinny-style base and compatible with Picatinny or Weaver scope rings.

User questions & answers

Question:	Will it fit on the Marlin 336BL (big loop
Answer:	I suggest not to use it outside for a long time, because the surface of the table legs is easy to rust.
Question:	Would it fit a marlin 17hmr bolt action
Answer:	It does NOT come with chairs. I only got the table
Question:	Anyone know if this will fit the Marlin 1894 or where I can get one that will
Answer:	Dear Customer, This table could work for screened covered patio,pls rest assured to use .
Question:	Will this fit the Marlin 925R
Answer:	The size of the round dining table is 80 * 80 * 75cm (31.49 * 31.49 * 29.52 inch). It can be used as dining table 、coffee table、tea table、office conference table、living room table. Both beautiful and practical.

Product features

Picatinny-style base - compatible with Picatinny or Weaver scope rings

Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately).

Manufacturer machines these using one of USA-made Fadal machining centers.

After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Picatinny cross slots

run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike.

This scope base fits the following: Marlin 1895, 336, 444, Model 36, Glenfield 30, Henry 3030(H009), Henry 4570(H010), Camp Carbine 9mm, and the Camp Carbine 45.

• XS RAIL AND GHOST RING UPGRADES PUSH YOUR MARLIN RIFLE to greater distances with increased accuracy.
• MACHINED FROM 6061-T6 ALUMINUM, with Mil-Spec Picatinny specs to maintain durability and form after drops occur.
• HARD COAT ANODIZED FINISH, the protective coating provides extreme durability from the elements on long hunts or in inclement weather.
• AVAILABLE WITH OR WITHOUT GHOST RING.
• SHIPS WITH TWO GHOST RING APERTURES for rail and Ghost Ring packages. The smaller, 0.191” is for hunting in brighter light and the larger 0.230” is for hunting in dusk or dawn settings to allow more visible light around the front sight.

User questions & answers

Question:	Will it fit 336y
Answer:	The mount is universal, so it should. I have used it on Marlin 30-30, 45-70 and my AR.
Question:	Will the rail fit a Marlin Camp Carbine
Answer:	It works great yes it will fit
Question:	Can it fit a
Answer:	No
Question:	Will this fit on the 1894 44 magnum
Answer:	https://www.amazon.com/s/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=marlin+1894+scope+mount&sprefix=Marlin+1894++scope+%2Caps%2C172&crid=TSTK93GUH999
Question:	Will this fit a 1895 gbl marlin lever action
Answer:	Not aure
Question:	Will this fit a marlin model
Answer:	Our furniture legs are recommed to use in wooden desktop,the screws can not through the glass,thank you.
Question:	Will it fit the marlin xt 22 magnum
Answer:	Two things to know: 1. the screws that come with the legs are cheap screws that will not work with hard woods. 2. The predrilled plate that mounts to the table top has the holes drilled close enough to the legs that putting the screws in with an electric drill is difficult. The drill is wider that the space between the leg and hole.
Question:	I have a Remington Model 7600 243 and was wondering will this base mount fit
Answer:	Yes,this is set of 2 table legs.Sorry,the white metal legs is out of stock, and it will take a month for it to be available.

Product features

Push your Marlin to greater distances with improved accuracy.

Lightweight, Durable Aluminum Picatinny Rail

Full length rail accommodates traditional rifle scopes and scout scopes.

The rail is machined from 6066-T6 Aluminum with a hard coat anodized finish to provide extra durability and withstand abuse from the elements.

Fully Adjustable Ghost Ring Iron Sights

The rear Ghost Ring is fully adjustable for windage and elevation.

The White Stripe front sight provides a bright easy to see front post in low-light or heavy brush hunting environments.

Two Ghost Ring Aperture Sizes

XS Ghost Rings ship with 0.191” and 0.230” inner diameter aperture sizes.

The 0.191” is preinstalled in the sight body and is ideal for hunting in bright light and for more precision shooting.

The 0.230” aperture is ideal for dusk or dawn hunts. The larger inner diameter allows for a greater field of view downrange for faster sight alignment. The larger aperture also allows more light in for greater visibility in low light.

Upgrade Your Lever Gun with a Premium OEM Factory Rail and Iron Sights

Easy DIY Installation

• Remove factory rear sight
• Install dovetail mounting pillar
• Place rail on barrel/receive
• Install screws and ghosting ring aperture

Product description

This is a scope base rail mount with multiple ring slot cuts for use on Marlin rifles. Machined from extruded aluminum alloy, the mount has 11 more up-to-date Picatinny style ring slot cuts which give more choices of placement of Picatinny or weaver scope rings on the rail. Finish is still the old school glossy anodized black that matches the look of the rifles. The kit comes complete with 4 mounting screws.

The rail mount fits the following rifles Marlin: 9, 45, 30AW/AS, 36, 62, 93, 336 ( All Models ), 375, 444, 1893, 1894 (All), 1895 Glenfield 30 Zane Grey Camp 9 Carbine 922M 989 22 Auto Rifle Mossberg 640. Overall length: 4 3/4inch

• Updated design with more Picatinny size ring slots
• Glossy black anodized finish
• Includes mounting screws
• Fits onto Marlin 336 and other rifles as listed below
• Works with both Picatinny and weaver style rings

User questions & answers

Question:	It is showing 48069 in description that is a number for a weaver henry lever action is that correct
Answer:	Absolutely. As long as it's an 1894 model you should be good. Great site.
Question:	Will this fit on a marlin
Answer:	I used it on my Marlin 1895, 45-70, so I would think it should.
Question:	does it fit xt22 marlin
Answer:	Yes it will fit, I've used this several times in my shop.
Question:	Does it fit 22-250 savage
Answer:	yes.

Product description

EGW MARLIN 1895, 336, 375, 444, CAMP CARBINE 9MM, CAMP CARBINE .45 PICATINNY RAIL 0 MOA

Rail Type: One Piece Picatinny

Machined from: Domestic 6061 T6 Extruded Aluminum

Finish: Matte Black Anodizing

Center Spread: 2.75"

Overall Length: 5.094"

Height: .4" (Top of Receiver to Top of Picatinny)

Weight: 2 oz.

Quick Disconnect Ring Compatible: No

Ambidextrous: Yes

Torque Specs: 20 in/lbs

Mounting Hardware: #8-40 X 1/4 Screws and T-10 Bit Included

This mount fits:

Marlin 1895

Marlin 336

Marlin 375

Marlin 444

Marlin Model 36

Glenfield 30

Henry 3030(H009)

Henry 4570(H010)

Henry .410(H018) Only fits the 20" Barrel

Camp Carbine 9mm (does not fit the early models, the hole spacing is different)

Camp Carbine 45

• RAIL TYPE: One piece picatinny with the picatinny cross slots running the full length of the rail for flexibility for mounting
• MOUNT FIT: Marlin 1895, Marlin 336, Marlin 375, Marlin 444, Marlin Model 36, Glenfield 30, Henry 3030(H009), Henry 4570(H010), Henry .410(H018) Only fits the 20" Barrel Camp Carbine 9mm (does not fit the early models, the hole spacing is different) Camp Carbine 45
• MOA: 0 MOA with a center spread of 2.75" / Overall Length: 5.094" / Height: 0.4" (Top of Receiver to Top of Picatinny) / Weight: 2 oz
• MADE IN USA: EGW mounts are machined in the USA. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long-lasting durability
• WHATS INCLUDED: Mount, Mounting Hardware (#8-40 X 1/4 Screws and T-10 Bit), and Lumintrail Lens Cloth

Product description

Features:

☀Fits all .22/Airgun rail and some rifles, such as Henry 22LR, Marlin model 60 70, Marlin 995, Air pistols and so on. (for a flat rail) not for nor air rifles.

☀Features in medium profile, one of the ring mounts design with removable stop pin, provide solid mounting on the rail.

☀The ring is for most scopes which are in 1''/ 25.4mm scope tube.

☀Precision machining from aircraft-grade aluminum alloy, solid and sturdy construction.

☀Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

☀With two rail clamp screws and four scope clamp screw, Precision and Repeatable Alignment.



Specification:

♦ Rail Type: 11mm Dovetail Rails

♦ Ring Diameter: 1''

♦ Material: High Quality Aluminum Alloy

♦ Style: Medium Profile (0.6inch)

♦ Dimension: 1.6 x 1.6 x 0.8 inch

♦ Weight: 3.5oz per ring



Package Content:

♦ 2 x 1'' Dovetail Scope Ring

♦ 1 x Hex Wrench

• ✔ Double dovetail rings for 11mm dovetail mount specialized scope mount for .22/Airgun.
• ✔ One of the dovetail mounts features a stop pin, for rock solid application. Adopt anti-oxidation and anti-corrosion coating treatment.
• ✔ Medium profile, 15mm(0.6 in) from top of the rail to bottom of scope rings ( Item height: 1.6'').
• ✔ The dovetail ring is for most scopes which are in 1''/ 25.4mm scope tube.
• ✔ With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment.

User questions & answers

Question:	What is the largest mm objective lens you can use with the medium high mounts
Answer:	Who knows? It fits certain rifles not calibers. I dont know if Marlin ever chamberd anything in that calibre.
Question:	Will this fit a marlon 70p
Answer:	Yes
Question:	Can this ring fit savage model 64 with scope tube 30mm
Answer:	No, XS does not have a rail that will fit the Camp Carbines
Question:	what do you thing of this product
Answer:	I don't believe it will as the spacing for the mounting holes is different.

Product description

Features:

Accept all weaver standard rings finish

Black anodized aircraft grade Aluminum for marlin 9, 45, 30AS, 30AW, 36, 62, 93, 336, 336C, 357, 444



Specifications:

Material: Aluminum Alloy

Length: 120mm / 4.73"

Width: 20mm / 0.78"

Weight: 38g

Color: Black



Package:

1 x Picatinny Rail

1 x Allen Key

6 x Screws

• ★ Made of aluminum alloy with all installation required hardware(screws and alley wrench).Length: 4 3/4" (120mm). Width: 5/6" (20.8mm).
• ★ Picatinny rail fits for Marlin 336, Marlin 30-30, marlin 1895 45-70, Marlin 1894, Marlin 30AS, Marlin 30AW, Marlin Camp 9, Marlin Camp 45, Marlin 1894C 357, Western Field 740, etc. With the correct screw hole spacing showed in the picture.
• ★ 11 slots Picatinny rail mount for your optic, scope, laser sight and allows an adjustment in their mounting positions.
• ★ Holes align in straight line and have proper spacing for Marlin lever action.
• ★ Easy setup with all screws and an allen wrench provided.

Product description

11mm Dovetail to 20mm Picatinny Weaver Rail Mount Adapter 10 Slots Tactical Aluminum Alloy for Air Gun Rifle Scope

• 11mm Dovetail to 20mm Picatinny Weaver Rail Mount Adapter 10 Slots Tactical Aluminum Alloy for Air Gun Rifle Scope

User questions & answers

Question:	what is the height clearance? From top of dovetail to underside of the top rail
Answer:	Hello, this rail is made from 6061 T6 aircraft Aluminum. thank you geo
Question:	Would this fit a Marlin XT
Answer:	The mounts fit perfectly fine on a gamo 1250 air rifle. The scope is way too big for the gun.
Question:	Will it fit a crosman shockwave air rifle
Answer:	Not familiar with a Marlon 70P, but if it has either 3/8", or 11mm grooved receiver, then they will fit.
Question:	Is this arched or flat between the dovetail clamps? I'm looking for an arched adapter. Thank you
Answer:	NO! These are 1 inch rings your scope tube is 30mm. You need 30mm rings wiht the correct height for youor objective bell.
Question:	What is the thread pitch of the hardware
Answer:	It’s a very good mount but just works for elevation If your looking to keep your scope close to factory zero for elevation this is the way to go
Question:	Hello, could I still use the iron sights with this and see thu rings installed on a XT
Answer:	Worked well on my .44mag Henry. Had to remove the rear sight though since my scope rings were low.
Question:	Does this come with the hardware as well
Answer:	yes
Question:	What kind of material are made
Answer:	Yes it has multiple mount applications for all marlins