12 best agptek fountains

Product description

Description:

With 12 LED (4 red + 4 yellow +4 blue 12*6*6cm) light, different color group LEDs are lighting up alternately.

Mist Maker Size: 4.6 cm diameter, 27.5cm tall.

Disc: 1.5cm.

Output Voltage: 17V DC.

Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker), 3.5mm in diameter. With a US AC/DC adapter.

Input: 110-250V, 50/60Hz

Output: DC 17V, 800mA

Points for attention:

1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer.

2.Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted.

3. Don't touch the atomizing slice while the Mist Maker is working.

4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)

5. Please switch off the power before Movement or maintenance.

6. The atomizing slice is consumable,and its service life is≥3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don't need to use any detergent).Keep it clean.

Package included:

1 x Mist maker

1 x AC-DC adapter (US plug)

Note：The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles. Please do not use pure water and other non-oxygenated water to run this product！

AGPtek is a registered trademark protected by the US Trademark Law. AGPtek products are sold by authorized sellers only.

• ◆ WIDELY USE - AGPtEK 12LED mist maker can add a great amount of mist to your pond or water tank to filter the bad smell with ultrasonic technology. You can put it in your pond, rockery, fish tank, vase, tank, etc. It will create a magical atmosphere. Especially perfect for Halloween and other holidays.
• ◆ ATTACTIVE LED LIGHT - The LED lights will change color randomly and which will light bright at night and attract lots of attention.
• ◆ ENVIRONMENTAL PROTETION - Our Mister Fogger can provide large amount of mist. Aerosolized amount≥300mL/H.No heat or chemicals used.
• ◆ SAFETY&EASY TO OPERATE - AGPtEK mist makers are UL certified and have high security, without worry about the potential danger. It is very safe to use. Put it in the water then the mist appears and the voltage is 24V so it’s safe to use.
• ◆ CUSTOMER SUPPORT - We strive to offer superior customer service and technical support. If you have any questions, please don’t hesitate to contact us, we respond email within 24 hours.

Product description

Specifications:

1. Mist Maker Size: 4.6 cm diameter, 4.2cm tall

2. Material:aluminum

3. Aerosolized amount 300-400ml/H

4. Disc: 1.5cm.

5. Output Voltage: 24V DC.

6. With a US AC/DC adapter

7. Input: 110-250V, 50/60Hz

8. Output: DC 24V, 700mA

9. Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker) , 3.5mm in diameter Points for attention:

1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer.

2. Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted.

3. Don't touch the atomizing slice while the Mist Maker is working.

4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)

5. Please switch off the power before Movement or maintenance.

6. The atomizing slice is consumable,and its service life is ≥3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don't need to use any detergent).Keep it clean. Note: 1.The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles.Please use higher container to prevent water from splashing out.

2.Please do not touch the top of atomization when use it, the frequency exceeds the body's normal tolerance range, so you may have a similar feeling of electric shock if you touch it, but this is not electric leakage.

3.If you find that the new product has some water stains or dirt on it, please contact our customers service

Package included:

1 x Mist maker

1 x AC-DC adapter (US plug)

• This AGPtek mist maker can add a stunning mist effect to your pond, rockery or water tank to filter the bad smell with electro and ultrasonic technology.
• Ideal for indoor or outdoor fountains, water feature, and office use.
• Perfects for use it in your pond, rockery, fishtank, vase, birdbath, etc, then it will create a magical atmosphere.
• Easy to operate, put in the water and the voltage is 24V, then the mist appears.
• No heat or chemicals used.

User questions & answers

Question:	Could you put this in the bottom of a 5 Gallon Paint Bucket to make it a humidifier or will the module be ineffective at that depth
Answer:	I've used this fan for small areas of dampness from an AC drain line backup, and it works well for that. But, for a larger plumbing leak, this fan would be inadequate. You need much larger air movers and possibly drying equipment to ensure a complete drying procedure is done. This will help ensure you don't end up with mold or mildew.
Question:	Can you use it in Hydroponics it doesn't sterilize the liquid doesn't
Answer:	It works great for me. I just make sure I put it at the bottom of the stairs.
Question:	Does this shut of on its own when the level is low
Answer:	home depot site says 374 CFM
Question:	The company I bought My fogger from is out of business 7 i need a Adaptor 24VAC/1.2A will this one work
Answer:	((((((( approximately 341 CFMs ))))))))

Product features

AGPtEK Aluminum Mist Maker Fog Maker is your good choose!

By using ultrasonic technology,this AGPtEK mist maker for indoor or outdoor use,which can add a stunning mist effect to your pond, rockery or water tank. Suitable for fountains, pond, rockery, fish tank, vase, birdbath and DIY humidifier for plants etc. Once you use them,they will create a magical atmosphere and filter the bad smell in water.

Points for attention:

1:Please Keep the water level higher then the nozzle 2~3cm/0.8~1.2inch to get the best atomization effect. but also cannot too high than the nozzle;

2:The Atomization Disc is Consumables and its service life is ≥3000 hours, so please keep the water clear and do not drop any essential oil in when using; (water quality deterioration may influence the lifetime).

3:When not using, please wipe clean with a cotton swab in time for avoid corroding product

4:Please ensure that the daily running time is less than 6 hours, otherwise the life of atomizing slice will be shorted.

5:It can only be used in tap water do not use Distilled Water.

6:In order to prevent water from spilling out when using, Please Put It Into a large or deep container. As a safety precaution, Please Do Not put any electric appliance near this item.

Product description

Description:

Brand new and high quality.

No heat or chemicals needed. Easy to operate, put it into the water, then the mist appears.

Ideal for indoor or outdoor fountains, water feature, and office use.

With 12 LED (4 red 4 yellow 4 blue) light, different color group LEDs lighting up alternately.

Mist Maker Size: 4.6 cm diameter, 27.5cm tall.

Disc: 1.5cm.

Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker) , 3.5mm in diameter.

With a US AC/DC adapter .

Input: 110-250V, 50/60Hz

Output: DC 17V, 800mA



Points for attention:

1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer.

2.Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted.

3. Don't touch the atomizing slice while the Mist Maker is working.

4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)

5. Please switch off the power before Movement or maintenance.

6. The atomizing slice is consumable,and its service life is 3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don't need to use any detergent),keep it clean.



Package included:

1 x LED Mist maker

1 x AC-DC adapter

IMPORTATN NOTE:

1.The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles.

2.The product will spray a small amount of water during usage, in order to prevent water from spilling out, PLEASE PUT IT INTO a large or deep container. As a safety precaution, PLEASE DO NOT put any electric appliance near this item.

3.Please do not use pure water and other non-oxygenated water to run this product

• With 6.8 ft AC adaptor，electric-Powered, with 12 LED (4 red 4 yellow 4 blue) light, creacing mor mistery atmosphere.
• Can add a stunning mist effect to your pond or water tank to filter the bad smell with electro and ultrasonic technology
• Perfects for use in your pond, rockery,fishtank,vase, birdbath, etc.It will create a magical atmosphere
• Please cleanning the fog port with slightly when not mist fog.
• Maker sure the item from the water surface is 3-4cm.If any questions you can let us know.

User questions & answers

Question:	Can any type of tubing be connected to direct the mist in another container
Answer:	Yes
Question:	Hi I just have question witch kind of liquid that I can use with
Answer:	I used the UVO professional disinfectant
Question:	Can you buy the splash gaurd seperatly? I already purchased the mister but didn't get the splash gaurd. If so where can I find them
Answer:	I haven't measured it, but it can spray very far, which is effective.
Question:	Is this safe to give "spooky pedicures" in a large enough bucket for a bunch of little girls
Answer:	Yes. However, it seems very heavy duty and looks nice in my daughters room. We've had it for awhile now and haven't had any issues.

Product features

Specifications:

• The AGPtek Patent Product--Mist Maker/Mist Generator, using ultrasonic electronic technology to make the water molecules into fog molecules.Perfects for being used in your pond, botanical garden, ecotron, rockery, fishtank, vase, pool.,etc. It will create a magical atmosphere. DO not harmful to any animals.
• No heat or chemicals needed. Easy to operate, put it into the water, then the mist appears. Ideal for indoor or outdoor fountains, water feature, and office use.

Points for attention:

1. Do not turn over the Mist Maker When the switch is turned on,keep upright,or it may damage the atomizer.
2. Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted.
3. Don't touch the atomizing slice while the Mist Maker is working.
4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)
5. Please switch off the power before Movement or maintenance.
6. The atomizing slice is consumable,and its service life is 3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don't need to use any detergent),keep it clean.

• ♦ WIDELY USE - AGPtEK fountain atomizer can add a great amount of mist to your pond or water tank to filter the bad smell with ultrasonic technology. You can put it in your pond, rockery, fish tank, vase, tank, etc. This fogger machine indoor will create a magical atmosphere. Especially perfect for Halloween and other holidays.
• ♦ WATERPROOF - The ultrasonic foger is waterproof and the length of the power adapter cable is long enough. Ideal for indoor or outdoor fountains, water feature, and office use.
• ♦ ENVIRONMENTAL PROTETION - Our plant humidity fogger can provide large amount of mist. Aerosolized amount≥400mL/H.No heat or chemicals used.
• ♦ SAFETY & EASY TO OPERATE - Put this mini mist maker in the water then the mist appears and the voltage is 24V so it’s safe to use. NOTE: Please DO NOT TOUCH THE WATER when it works.
• ♦ CUSTOMER SUPPORT - We strive to offer superior customer service and technical support. If you have any questions, please don’t hesitate to contact us, we respond email within 24 hours.

User questions & answers

Question:	Will this make enough fog or mist to overflow a 22" X 17" container for a holloween prop
Answer:	I dont know how you are able to get persons name. Maybe try to contact the seller. I just did happy birthday
Question:	Does the mist maker make much/any noise
Answer:	Email the seller they fedex them overnight. It’s ridiculous that they can’t send everything they advertise
Question:	What is the difference between this one and the aluminum one
Answer:	All Monarch Rain Chains work with any Monarch Adapter. The key is to measure your gutter so you buy the correct adapter, Large or Standard. I hope this answers your question.
Question:	how deep can this be placed under water and still produce fog
Answer:	we had to modify it to fit ... my downspout was square-ish and this is definitely not. so truthfully, I can't answer. We had to cut the plastic of the downspout opening to make it work. not a perfect solution, more of a work-around

Product description

This AGPTEK mist maker can add a stunning mist effect to your pond or water tank to filter the bad smell with electro and ultrasonic technology. You can put it in your pond, rockery, fish tank, vase, birdbath, etc. than it will create a magical atmosphere.

Disc: 1.5cm.

Output Voltage: 24V DC.

With a US AC/DC adapter.

Input: 110-250V, 50/60Hz.

Output: DC 24V, 700mA.

Aerosolized amount:=400mL/H

Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker), 3.5mm in diameter

Package included :

1 x Mist maker

1 x AC-DC adapter (US plug)

Points for attention:

1. Do not turn over the Mist Maker When the switch is turned on, keep upright, or it may damage the atomizer.

2. Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted.

3. Don't touch the atomizing slice while the Mist Maker is working.

4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)

5. Please switch off the power before Movement or maintenance.

6. The atomizing slice is consumable, and its service life is=3000 hours. If marked reduction of Mist present, please clean atomizing slice with a cotton swab (don't need to use any detergent).Keep it clean.

Note:The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles

• Add great effects to your pond or swimming pool. Perfects for use it in your pond, rockery, fishtank, vase, birdbath,outdoor fountains, water feature, and office use etc, then it will create a magical atmosphere.
• No heat or chemicals used. Atomization Amout:=400mL/H.
• Easy to operate, put in the water and the voltage is 24V, then the mist appears.
• Mist Maker Size: 4.6 cm diameter, 4.2cm tall. Material: aluminum
• Package included : 1 x Mist maker 1 x AC-DC adapter (US plug)

User questions & answers

Question:	Can this be used to find vacuum leaks in a car
Answer:	I don't know, I used a sharpie to write on mine, I don't see why not though. I would use a stencil and spray couple of light coats so that it doesn't run.
Question:	would this fogger be OK for misting a tomato grafting unit
Answer:	Mine shipped from overseas, by Dong Dong Express. Took longer than expected to receive
Question:	could I run it of a solar panel
Answer:	The longer part of this stake should go into the ground and the part with the bump will into the Y. It should be able to go in the middle of the Y, but if it does not, place the stake far into in the Y to ensure stability while it is in the ground.
Question:	Does the mister shut off if there is not enough water
Answer:	I believe so. They are made from the same plasticky material politic yard signs are made of. If you have a lot of wind with the rain, some of the long skinny letters might turn around but they are easily adjusted. I hope this answer helps

• ♦ Multi-Appliable Scene -- AGPTEK Mist Maker can used in your pond, fountain, rockery, fish tank, vase, tank, etc. It will create a magical atmosphere. Especially perfect for Halloween and other holidays.
• ♦ Mini Size Large Capacity of Mist - Our fountain atomizer can produce large amount of mist although it. Aerosolized amount≥400mL/H.No heat or chemicals used.
• ♦ Ultrasonic Technology -- When putting this plant humidity fogger into your pond or water tank, it can add a great amount of mist t to filter the bad smell with electro and ultrasonic technology.
• ♦ Safe & Easy-Operated -- The voltage of AGPTEK mist makers is 24V, so it’s safe to use. Put it in the water then the mist appears.
• ♦ Long Cable -- The cable length of this ultrasonic foger is 210 cm(90cm attach to adapter, 120cm attach to mist maker), long enough to use in different scene. Ideal for indoor or outdoor fountains, water feature, and office use.

User questions & answers

Question:	can you use esscencial oils in the water you fog
Answer:	I used waterproof paint (ordered on Amazon).
Question:	Can it be use with live animals
Answer:	Hi most permanent markers are good as far as paint we use UV screen printing ink brand Nazdar you may find from screen printing supplier thanks

Product description

Description:

Mist Maker Size: 3.5 cm diameter, 4cm tall.

Disc: 1.6cm.

Output Voltage: 24V DC.

With a US AC/DC adapter .

Input: 110-250V, 50/60Hz

Output: DC 24V, 700mA

Cable Length: 210 cm (82 inch) (90cm attach to adapter, 120cm attach to mist maker) , 3.5mm in diameter.

Package included :

1 x Mist maker

1 x AC-DC adapter (US plug)

Points for attention:

1. Do not turn over the Mist Maker When the switch is turned on, keep upright, or it may damage the atomizer.

2.Please ensure that the daily running time is less than 10 hours, otherwise the life of atomizing slice will be shorted.

3. Don't touch the atomizing slice while the Mist Maker is working.

4. Ensure the water at high quality, use clean tap water.(water quality deterioration may influence the lifetime)

5. Please switch off the power before Movement or maintenance.

6. The atomizing slice is consumable,and its service life is¡Ý3000 hours.If marked reduction of Mist present, please clean atomizing slice with a cotton swab(don't need to use any detergent).Keep it clean.

Note:

The product of the nozzles upper part, the water injection mouth more than 2-3 cm best, not less than nozzles, also cannot too higher than nozzles

• Add a stunning mist effect to your pond or water tank to filter the bad smell with electro and ultrasonic technology;
• Ideal for indoor or outdoor fountains, water feature, and office use.
• Easy to operate, put in the water and the voltage is 24V, then the mist appears.
• Atomization Amout: ¡Ý400mL/H
• Mist Maker Size: 4.6 cm diameter, 4.2cm tall

User questions & answers

Question:	Do i need to buy a flot for it
Answer:	You would need an external enclusure or docking station that has its own power supply. A USB adapter only does not have enough power to control the drive.
Question:	Which diameter is accurate for the head that doesn't have LEDs? 3.5cm or 4.6cm
Answer:	back up your data the motor is starting to fail
Question:	What depth of water would need be to cover this? I plan to put it in the bottom of a 10 gallon aquarium that I will be using for a terrarium
Answer:	its up to you. i hoarded all my old computer parts over the years so i never had a shortage for projects.
Question:	How big is the ultrasonic disc on this? Can it be replaced? Thanks
Answer:	If you’re using this as a boot drive for windows 7 then you’re probably not going to be able to have a partition larger than 2 TB. To have a boot partition larger than 2 TB it must use a GPT partition table as opposed to a master boot record. Search the Internet for “windows 7 boot drive larger than 2tb”

• ◆ HIGHT QUALITY -- The main material of these Submersible LED Lights is plastic of superior quality. AGPtEK waterproof submersible tea lights are plastic flameless candles with realistic light. Each LED tea lights battery operated is thoroughly and rigorously tested.
• ◆ HOW TO USE -- On/Off switch for easy & convenient operation. AGPtEK underwater tea lights are easy to use; Simply switch On / off on the bottom to control it. AGPtEK floating candles are powered by CR2032 batteries. Very easy to replace when out of power, just try to twist off the bottom of candles.
• ◆ HIGH SAFETY -- Tea lights battery operated are flameless, smokeless and long lasting, safe to use. No hot and dirty wax to deal with. Absolutely no fire hazards or burning risks, our flameless tea lights are safe for families with pets or kids.
• ◆ WIDELY USE -- These submersible led tealights are Warm White. They are ideal for decorations. Our waterproof submersible tea lights can be used to illuminate fountains, place them in water under decorative water crystal beads or water crystal granules in a vase to create amazing effects.
• ◆ PACKAGE -- 24 X LED Submersible lights； 24 X CR2032 coin batteries (inside the candles)

User questions & answers

Question:	Does the "warm light" color have a yellow tint to it
Answer:	I would say not. They are quite bright but not stark white. It's a soft white color but not yellow.
Question:	Are they reusable
Answer:	They are not. And last at most 24 hours
Question:	How many hours do these last before having to replace the battery
Answer:	Mine have stayed lit for a week and 1 day at this point. They aren’t as bright as they were when I first lit them, but they are still providing a beautiful warm glow to my vases.
Question:	How many lights are in a pack, does battery come with them
Answer:	24 and all works! I used the lights on my wedding and everyone liked it . The lights come with battery and you don't have to worry about it ! I'm pretty satisfied!!!

• ❥ Simple and Stylish Design: Most Suitable for your Apple Pencil. Lightweight protective cover, stylish. Grey color is suitable for business situations and in daily life.
• ❥ Keep Everything in One: You can hold Apple Pencil, Samsung Tab S4 pen, flash adapter and charging cable in place. The incorporated mesh pocket and elastic band allow you to stow small accessories and keep your Pen from getting lost.
• ❥ Premium Material: Adopts quality materials and provides excellent protection from scratches, dirt, shocks and other daily damages. soft microfiber inside, specially designed for Apple Pencil and accessories.
• ❥ Integrated Mesh Pocket: The incorporated mesh pocket allows to store small accessories, as well as headphones, SD card or USB cable and so on. Providing your Apple pen and accessories with full protection.
• ❥ Versatile Storage Function:The entire box not only can put Apple pencil, but also can hold 3pcs pens, voice recording pen or pencils and small accessories such as charging cable, earphones and Apple original adapter.

User questions & answers

Question:	Would the small accessories that come with the Apple Pencil fit securely
Answer:	Pencil fits perfect! Photo reflects accurate accessory space. I keep my spare pencil tip replacements and cap in the tiny baggie they came in and put it in the small net pocket(there are 2 pockets, so the small items don’t get pulled out when removing headphone or charge cord from other pocket). Love my case, no longer search for misplaced accessories!
Question:	is there similar in black
Answer:	https://www.amazon.com/dp/B07KPVL1KV https://www.amazon.com/dp/B01LCRNYMU https://www.amazon.com/dp/B076V9RBLJ
Question:	Will this case hold a Livescribe Symphony
Answer:	Thank you for your question. Yes, this case hold a Livescribe Symphony, the dimension of the case is 8.07 x 2.95 x 1.57 inches, the dimension of Livescribe Symphony is 5.91 x 0.46 x 0.46 inches, please rest assure to to use it If you have any question, please feel free to contact us Best regards
Question:	How long is this case
Answer:	The case is approximately 8 inches long. It really holds more than the apple pencil. I have been able to consolidate several things into the case making it more efficient to carry my extras.

Product features

Premium Synthetic Materials

Adopted quality materials to protect your device intimately. Premium synthetic outside and soft microfiber inside, specially designed for Apple Pencil and accessories.

Product dimension: 20.5 X 7.5 X 4cm.

Tidy Everything in One

You can hold Apple Pencil , Samsung Tab S4 pen or recording pen , flash adapter and charging cable firmly in place with the box. The incorporated mesh pocket and elastic band allow you to stow small accessories and keep your Apple Pencil safe.

Simple and stylish design

Most Suitable for your Apple Pencil. Lightweight protective cover, stylish and user-friendly. Grey color is suitable for use in business situations and in everyday life.

Rubber Band Design

The rubber band design can fixed your apple electronic pen better. No need worry the electronic pen be damaged by the collision while moving.

Integrated Mesh Pocket

The incorporated mesh pocket allows to store small accessories, as well as headphones, SD card or USB cable and so on. Providing your Apple pen / recording pen or accessories with full protection.

Portable and Practical

You can also use it as a normal pencil case in your daily life. It is not only a good companion in your life, but also a good partner in your studies.

• ✅Step Down Voltage Transformer Converter -- This voltage transformer converts 12 Volt AC product into a 110/120 Volt AC plug.【NOTE: The output of this transformer is AC, NOT DC!!!】
• ✅ Technical Information -- The wattage of this voltage converter is 25W. Input 100-120 V AC, Output 12v AC - 2.1A.
• ✅ Special Design -- This 110 to 12 volt converter is small and compact, easy to install. This power voltage converter is totally waterproof.
• ✅ Wide Application -- This ac voltage transformer is ideal for the use with swimming pool light, water pump, Outdoor light, coolers, spotlights, atomizer, fans and more.
• ✅ 100% Satisfaction Guarantee -- We are extremely committed to our customers. If you are unsatisfied with the voltage transformer 120v to 12v, simply return it within 30 days for money back.

User questions & answers

Question:	Will this work to power a winch
Answer:	Good always overpowered the evils Of all man's sins... But in time The nations grew weak And our cities fell to slums While evil stood strong In the dusts of hell Lurked the blackest of hates For he whom they feared Awaited them... Now many many life times later Lay destroyed beaten beaten down Only corpses of rebels Ashes of dreams And blood stained streets... It has been written "Those who have the youth Have the future" So come now children of the beast Be strong And shout at the devil... ***Make sure that it's plugged into a gfci***
Question:	Can this be attached to an LED fishing light on my dock
Answer:	Yes
Question:	Will this work for a saltwater fish tank float switch
Answer:	I have a single 12 LED light attached to the transformer, and all is working well.
Question:	if the 12vac side shorts what happens? there is no ground or safety
Answer:	I'm sorry. I can't answer that. You will have to contact the manufacturer. I have purchased (2) of these for different lighting projects. They have worked perfectly on each.

• ✅ Step Down Voltage Transformer Converter -- This voltage transformer converts 12 Volt AC product into a 110/120 Volt AC plug.
• ✅ Technical Information -- The wattage of this voltage converter is 60W. Input 100-120 V AC, Output 12v AC – 5 A.
• ✅ Special Design -- This 110 to 12 volt converter is small and compact, easy to install. This power voltage converter is totally waterproof.
• ✅ Wide Application -- This ac voltage transformer is ideal for the use with swimming pool light, water pump, Outdoor light, coolers, spotlights, atomizer, fans and more.
• ✅ NOTE: The output of this transformer is AC, NOT DC!!!

User questions & answers

Question:	I have a spotlight for my flag pole and need a transformer to step it down to 12vac. i need a photo cell installed, can i hard wire this to gang box
Answer:	Hi customer, thank you for your inquiry. It depends on how many watts of power the light has, and how long the wire is connected. If the wire connected to the transformer is too long, the voltage of the supply will loss. Therefore, the light will be less than 12V. Normally, you can receive a total power of 60W. If a light is 5W, it is recommended to connect 8-10 lights. If you connect 12 lights, the lights will be darker. Because there is electrical loss in the long wire.
Question:	Will this work on 12 volt led landscape lights
Answer:	They are about 1 1/2" from base to tip of light and about 1 1/4" wide. I have them in fancy jars and they work very well. Nice with the timer feature.
Question:	Is this voltage transformer magnetic or electronic? my led lighting manufacturer says their lights work only with magnetic voltage transformers
Answer:	Hello...I could not locate any info on the box indicating the manufacturer's location. However, they have a website where you might find a specific source if not AGPtek. http://www.agptek.com/support/about-us.html I have never had a problem with these tea lights...in fact, because I replace the batteries that come with them with Maxell C2032, I use them in my fairy garden outdoors through hot and cold weather...protected by an inverted small glass...the light lasts for months. Beautiful at twilight and they stay brightly lit for at least 6 hours. Excellent results every time. Even when damp (not submerged) they will light. I'm thinking about getting some clear plastic balls and put a tea light in each one and add them to my landscape.
Question:	How many 12 V lights may I connect to the step down transformer
Answer:	Yes, the batteries are super easy to change. In fact, a couple of mine did not work at first, but then I realized the battery was in upside-down, and when I flipped it over they worked just fine. Out of 90 lights, only 1 or 2 did not work.

• ◆ Light Weight & Portable Design - AGPTEK balloon pump can easily create a warm atmosphere. This electric balloon pump is commonly used in some activities/festive/party/celebration/decoration.(NOTE:This is NOT a machine for he-li-um, it is an AIR machine.)
• ◆ Fast and Efficient - This balloon inflator fits to latex balloon and decorative balloon. Double pump, balloon air pump. The balloon inflator pump has two modes: manually and automatically.
• ◆ Size - 20 x 15 x 12 (cm). This balloon air pump is designed with two modes: manual and automatic one. Pressure: 18000pa-22000pa, 1.75psi. Input voltage :110-120V. Frequency: 50/60Hz
• ◆ Product Weight - 1.3KG. Color of electric balloon pump: Rose red. Air Volume 300 (L/min). Power: 600W.
• ◆ NOT Helium Pump - This is an AIR balloon pump instead of helium pump. The balloons would NOT float in the sky. It fits to latex balloon and decorative balloon. 2 samll size nozzles included allow you to blow up the small and thin balloons at the same time.

User questions & answers

Question:	Does this pump have a nozzle that can fit and inflate small, thin balloons that are used to make animals/ balloon art
Answer:	I bought this pump for the very purpose of making balloon animals, etc. I returned it because it doesn't do the job. It would be good for round balloons but not the 160's and 260's.
Question:	can this blow up latex balloons for me to bunch together as balloon tree
Answer:	Yes ,it can,but when you use it ,you should let it rest after worlk nearly 2 hours ,otherwise, it will heat.
Question:	Does the pump allow you to inflate 2 balloons at the same time
Answer:	Yes you can. There is a spot where the air is pulled through on the side. Whoever wrote that it couldn’t doesn’t know what their talking about. It’s made so that you can blow up more than one at a time. Flip the switch and it will power both ports without stopping. One is a manual one where you have to push down on to activate the air. For the pink port to work you have to flip the switch.
Question:	Can you use this on foil and Mylar balloons
Answer:	yes you can, but is not going to flow like helium balloons.

Product features

PRODUCT INTRODUCTION

AGPTEK electric balloon pumps are suitable for advertising balloons activities and balloon decoration, party and festive scene layout. The inflation rate of this balloon pump is fast.

Fast, Efficient & Easy to Use

Simple and flexible operation on this balloon air pump, switch control inflation, classified as continuous and touch-on two patterns, the appearance of baloon inflators are lightweigh and portable designed.

More Details of Balloon Pump

This balloon pump fits to latex balloon and decorative balloon. Double pump, balloon air pumpElectric balloon pump has two modes: manually and automatically.