8 best air shock pumps

• Bleed valve
• 300 PSI

User questions & answers

Question:	What is the length or size
Answer:	All main channels and sub channels are in the guide. Yes sub channels are all in SD in the LA area.
Question:	can i use it on tires
Answer:	You can buy a USB hard drive to add DVR capability (AirTV site has recommended hard drives). It supports up to 2TB of recording space, which can store over 400 hours of recordings. The AirTV has 2 tuners: live viewing, DVR recording, or DVR playback each requires a tuner. So you can watch live on two devices at the same time. Or watch one channel live and DVR record it or another channel at the same time. Or DVR record two channels w/ no watching. Or watch one or two DVR recordings. If you try to use more than 2 tuners it will ask you to stop one of the other tuner using activities.
Question:	Will this pump work on a 2011 float rp23 rear suspension
Answer:	If you already have SlingTV, better deal is to prepay for three months and get AirTV-2 for $39.00 shipped to your home, just call Sling and ask for this offer.
Question:	The picture shows two products. Does this come with two pumps
Answer:	No, not at all. It's always best to connect devices, that can be, via Ethernet. Please see my review (Casper). If you're using an Ethernet connection to the AirTV 2 no need to use the built in WiFi. It will be linked into your home network. Hope this Helps. :-)

• ACCURATE: The gauge is precisely machined and carefully tested in the factory. It gives very accurate gauge reading even for a very high pressure with low volume air. The feature ensures that the rider could set the air shock or fork pressure exactly according to the rider weight.
• HIGH PRESSURE: A lot of shocks or forks require very high pressure. The high pressure shock pump's aluminum alloy barrel is specially designed for pumping shocks or forks. It pumps less volume of the air but high pressure easily. The maximum pressure it reaches: 300 PSI or 20 bars
• DUAL MEASUREMENT INDICATOR: The gauge has PSI or bars measurements for your convenience. The black background and white needle ensure clear and easy reading. Another good feature is that the gauge is also waterproof. 360 degree rotating flexible hose can reach the valve at at any angle.
• AIR BLEED BUTTON: You may have pumped too much air in the shocks or forks. The air bleed button allows to release the excess air without disconnecting the pump hose. Pump Length: 230mm = 9.05 inch. Weight: 216g = 0.48lbs.
• ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty ! Made in Taiwan.

User questions & answers

Question:	Can be used whit dnm ao 42rc negative air connector or need male adapter and where can i get it
Answer:	I do not know, however you can call 1-844-zurita. They are very helpful. Have a great day.
Question:	Works with rockshox forks and rear suspension
Answer:	Thanks for your interest. Our products are always 100% authentic.
Question:	What country is this product manufactured in
Answer:	Yes it is. Texasgirl is incorrect; sugar is not a listed ingredient. Stevia leaf is the listed ingredient and it is indeed Keto approved.
Question:	Will this work on dnm ao-6 rear shock? Or do i need an adapter
Answer:	My container is 2/2021

Product features

Air Bleed Button

It releases the excess air easily.

Comfortable to use

Compatible with all the shocks and forks in the market.

Gauge

Clear reading gauge with PSI and Bar measurements.

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories.

WIDE SELECTION

With more than 2000 high quality and good value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from leading factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

• Dial in Your Shocks For A Great Ride – Pump low volume, but high pressure, capable of achieving 300 Psi / 20 BAR. Great for shocks with Schrader valve connection used for bikes – road, mountain and motorcycles.
• Perfect The Pressure in Your Suspension – Precision calibrated pump allows you to perfectly tune the travel and damping in your forks and rear shocks – an essential for all mountain bikers and motorcyclists!
• Accurate Regulation & Adjustment – Clear and easy to read 1.5” industrial gauge with PSI & Bar readout. Fine-tune bleeder button to obtain the exact pressure for the ‘ultimate comfort’ on your ride. ‘2 Stage Anti-Leak’ valve head delivers a secure valve connection when pumping and ‘no air leaks’ when removed.
• Comfortable & Easy to Use – Pull out T-Handle with ergonomic design ensures ‘pinch-free’ pumping. 6” swivel hose with pivot mount makes sure it’s easy to get things lined up and pump in any angle, which we know can be especially difficult with shock suspension.
• Pro Quality & Performance – High quality CNC machined alloy head and barrel for strength, reliability and lightweight. We’re so confident about our bike tools that if you have any product issues, we’re very happy to either provide a Refund or a Replacement on your purchase!

User questions & answers

Question:	Will this pump fit rockshox SID models
Answer:	Yes Yes this is a high pressure pump design for your Front fork, Shock and seat post All are high pressure with the schrader valve this will work
Question:	hi my husband is an occasional mountain bike rider who wants a pump thats electric & can plug into a wall outlet. Is there one
Answer:	No. unless you are planning on pumping for a really long time. This is for air fork/shock
Question:	Is this pump life time waranted
Answer:	That looks like it is a dirt bike fork, this shock pump is meant for a mountain bike but as long as that dirt bike fork has a shrader valve and does not need more than 300 psi you should be good with it
Question:	Does Pro Bike Tool have a shock pump for presta connections
Answer:	Works just fine on my '13 crf450 air forks. Same pump the other companies charge double for

Product features

EASY TO USE AND ACCURATE SHOCK PUMP FOR YOUR FRONT AND REAR SHOCKS

When you get your new mountain bike you want it to feel and work its best from the beginnng and ongoing. Setting up the suspension for your MTB will significantly change how the bike feels, so it's worth taking the time to get it right using our precision calibrated bike shock pump.

Our easy to use and accurate shock pump can be used for rear and front bike suspension including Rockshox and Fox shocks. The pump is capable of delivering up to 300 psi / 20 BAR with a clear and easy to read 1.5" industrial gauge with PSI and BAR readout. The pump design uses a 2 Stage Anti-Leak valve head, which delivers a secure connection when pumping and no leaks when removed. Fine tune bleeder button enables you to obtain the exact pressure for the ultimate comfort on your ride.

The pump is comfortable and straightforward to use as it features an ergonomic T-handle for pinch-free pumping. The 6" swivel hose with pivot mount design makes it easy to get things lined up and pump at any angle.

WHAT IS SUSPENSION SAG?

Suspension sag is the amount of suspension travel used when you are sitting on your bike in a natural riding position. This means that when you get on your bike and have your weight distributed like you would when riding, the suspension should be compressed some amount. The reason that we want sag is so the wheels are able to conform to the contour and shape of the ground while riding over rough terrain.

With too much sag, meaning the suspension travel is compressed too much when weighted, the suspension may bottom out too often and the bike's geometry may be out of wack making it harder to corner, jump, etc. With not enough sag, you aren't getting the full benefit of a suspension mountain bike and the bike will struggle to find traction.

HOW TO DIAL IN YOUR SHOCKS FOR A GREAT RIDE

There are two main steps to setting your suspension

1. Setting your sag - the amount of movement in your suspension.

2. Setting your damping - how quickly the fork or shock returns to its resting position after it has compressed.

To set your sag, use your shock pump to adjust the air level in your stanchions so that they sink approximately 25% of their total length when you put all your weight through the bike.If the movement is less than 25% of the stanchion’s length, you need to bleed air from your shocks with the shock pump. If the movement is more than 25%, you need to add air with your shock pump. This process requires a little trial and error and it helps to have a friend assist you.

When you’re happy that your stanchions are moving around 25% down the shock/fork, take a note of the pressure that you have in the stanchion for future reference. You will next need to set your damping by adjusting the rebound knobs on your suspension.

BEST SELLERS

With over 500,000 bike tools and products sold so far - that many people can't be wrong!

COMMUNITY

We've partnered with cyclists and cycling teams around the world to support all areas of cycling.

PASSION

Everyone on the PRO BIKE TOOL Team is a passionate cyclist, this is what we love!

Who We Are

PRO BIKE TOOL was born in 2015 when founder Chris left the safety & security of corporate life to follow his passion for cycling.

Taking a huge leap of faith into the world of entrepreneurship, Chris dedicated himself to building a business that produces the highest spec tools at a value making them accessible to all riders.

We pride ourselves on giving you the ultimate user experience. From our top-quality products to our commitment to great service, we’re here to make your life easy.

Product description

Makes spring rate adjustments on the air sleeve a simple task.

150 psi max.

For use with Fox Float/II AirShox.

For use with Fox Float/II AirShox

• Makes spring rate adjustments on the air sleeve a simple task
• 150 psi max
• For use with Fox Float/II AirShox
• For use with Fox Float/II AirShox

User questions & answers

Question:	I have a pump just like this i need an end for the hose it is missing the rubber gascket
Answer:	The pump screws onto Schraeder valves, like on your car tires. If that's what you have, this should work.
Question:	Does the end piece swivel
Answer:	This pump works with all rockshox forks and shocks
Question:	Does this pump come with a storage case
Answer:	I’m not sure what country it is manufactured in, but it is shipped from the USA
Question:	Will this pump work on another brands of air fork/shock
Answer:	It fits on a regular Schraeder valve (like on your car tires), so if that's what you have, and you need under 300psi, I'd say go for it.

• 【Top Features】Selectable dual function / Fine tune bleeder button / 300psi(21bar) precise clear view dial gauge, Easy to read /CNC aluminum alloy body / Mounting bracket /360 degree swivel hose / User-friendly Schrader & Presta valve adapter. Built as the smaller and travel-friendly, With 24.5mm long and 211g, easy to carry in a backpack or hip-bag.
• 【Dual Function】Working as both a shock and tire pump /Switch between modes with a simple button on the bottom of the handle /High Volumn (HI-V) mode for tire inflate, High Pressure (HI-P) mode for fork/shock mtb & motorcycle. Tips:the air will output from hose and handle on the HI-P mode.
• 【2-Stage Bike Pump(Hi-V / Hi-P Switching)】: If you use Hi-V for the tube at first and then use Hi-P to apply high pressure with a light force while adjusting, you can supply air at a relatively high speed even with MTB tires. Hi-V mode means more air output every stroke, it allows you pumping faster at first, Hi-P mode means higher pressure and less air output. It slows the inflating speed but makes the stroke easier.
• 【Valve Adapter】SV adapter for all the standard SV of shock/fork/tire, PV adapter instruction: Remove the cap - Loosen the locknut to the top - Test the air out by depress the locknut - Install the adapter
• 【BETO (Be The Original)】A Taiwan company,founded in 1988, offers a wide variety of bicycle accessory product and especially notable in pumps. Our dedicated R&D team with over 30 years of design and manufacturing experience always strive to offer most unique and innovated tool to every cyclist.Provide OEM service for well-known pump brands.

User questions & answers

Question:	I bought one and thought that the gauge will read the current air I have in the tire. Am i using this poperly? used the presta adapter
Answer:	If your post uses a schrader valve then yes. Schrader valves are the type that are on a car tire, btw. The nozzle screws onto the valve.
Question:	Why wont the pump screw on presta valve
Answer:	No. Mounting brackets normally come with tire pumps, not shock pumps.
Question:	Will this mini shock pump work on tires as well
Answer:	It is only for Schrader valves, and not designed to pump up tires.
Question:	will this fit on a cannondale headshok i.e. fit up inside the fork
Answer:	What is a pressure bleed bottom? Others words probably not.

Product features

Gas shock / Air Tire Dual Function Combo Pump (SP-005AG)

• Dual barrel/dual piston oppose-pumping system
• Selectable dual function: Hi-Pressure for gas shock or Hi-Volume(Low Pressure) for air tire
• 300 PSI capable with fine-tune bleeder valve
• Precision 1.5" industrial pressure gauge
• The metal head fits Schrader w/Presta adapter
• Swivel hose for easy operation
• Solid CNC butting aluminum barrel

1.5” Pressure Gauge

• Easy to read and includes dual scales for PSI and BAR standard.
• Max pressure 300 psi /21bar
• Red Fine-tune bleeder valve

CNC Aluminum Alloy Barrel

• Barrels built solid in aluminum alloy inside and out, inner tube is about 14mm diameter. Make efficient inflating

For Both Valves

• Works with Schrader and presta valves
• Sweet head storage design when foldable

HI-V MODE (For tire)

Selectable modes on the pump bottom

Hi-V means High Volume(Low Pressure)

HI-V Instruction

More air output on every stroke, we recommend you use this mode on the low-pressure situation,

It can make you fast pumping at firstly

HI-P MODE (For shock or suspension)

Once you switch to the HI-P mode,

Which is the high pressure mode

HI-P Instruction

Less air output for each stroke,

• you can feel the “air leak” from the bottom on this mode, Designed like this!!!

Guida for the Presta Valve, Step 1

-Remove Presta valve cap

-Loosen the locknut to the top

Step 2

Verify airflow is possible by quickly tapping the tip of Presta valve

Step 3

Screw adaptor onto Presta valve.

Step 4

You are now ready to use the pump.

Brand History

BETO founded in 1988, offers a wide variety of bicycle accessory products and especially notable in pumps. Our dedicated R&D team with over 30 years of design and manufacturing experience always strives to offer the most unique and innovative tool for every cyclist.

Owned over 300 patents in various countries through the 30 years experience and is honorably recognized by multiple international awards such as Good Design, iF Design, and Red Dot Design.

• ACCURATE: Digital bike shock pump gives you exactly pressure measurement. Much more accurate than a normal gauge pump. High pressure up to 300 PSI with clear digital gauge. Hi-tech LCD Display panel.
• QUALITY: The barrel is made of high quality 6063 aluminum. It ensures pumping reliability.
• AIR BLEED BUTTON: You may have pumped too much air in the shocks or forks. The air bleed button allows to release the excess air without disconnecting the pump hose. Micro adjust 2-3 PSI air Bleeder.
• PORTABLE: Length: 220mm = 8.5 inch, Weight: 260g = 0.38lbs. Very light and portable. You can carry it with you all the time.
• ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide 5-year warranty! Made in Taiwan.

User questions & answers

Question:	Are these pump good for tires as well? Not only shocks
Answer:	Yes just the pouch with a smaller pouch with a zipper inside
Question:	Can this be used to accurately check bike tire pressure
Answer:	Quite a few, if you had like travel shampoo bottles I'd guess like 10 flat on the bottom. More if you stacked stuff.
Question:	Is battery replaceable
Answer:	It’s a light blue, looks almost exactly like the picture.
Question:	Does this pump read down to zero? My forks call for 7psi
Answer:	I WOULD THINK SO! AS LONG AS WHAT IS IN THE BAG ARE TRAVEL SIZE

Product features

Accurate Pressure

100% Accurate shock and fork pressure, no more guess. Better performance !

Compact & Portable

The pump is only 8.5 inch in length.

Large LCD Panel

Large digital LCD panel for easier reading.

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories.

WIDE SELECTION

With more than 2000 high quality and good value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from the factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

• Shock pump use on inflating mountain bike’s air fork or rear suspension with Schrader valve, please don’t use it on inflating bike tires. 300 Psi max
• Unique No-Air-Lose nozzle- Experienced cyclists know shock pump always lose a small mount of air when disconnect, this pump with lever lock on head will not with proper operation
• Top quality products- Major in cycling accessories more than 10 years, we know a lot about cycling products, this shock pump made in Taiwan- world excellence of cycling products. Most American well-know cycling brands are all made in Taiwan if you want to know
• ATTENTION! - Some sellers use less expensive mode and take similar photos to mislead customers. You can compare the handle part to distinguish. Ours’ handle is rubber material, theirs are plastic, also ours are bigger, you can not distinguish with online photos
• Sold higher mode with lowest price- It is sold at an extremely low price. If risks considered, we even lose money selling it sometimes. We do this just because want more sale

User questions & answers

Question:	Will the nozzle fit my TranzX dropper seat post
Answer:	Not 100% on the SID models (?), But if they have a Schrader valve then this will work. Works on my RockShox fork, and my X-fusion shock.
Question:	Does this pump come with a mounting bracket
Answer:	This is a Shock pump. It isn't for tires. It takes a very low volume but high-pressure hand pump like this to reach the psi you need for Shocks. If your husband wants an electric pump he probably wants a tire pump, not a shock pump. A tire pump would be lower pressure but high volume so you can pump it up faster. But honestly, most cyclists prefer to just use a good Floor pump and pump up tires by hand. They are affordable and will last a lifetime, They make it easy to pump a tire up to a very specific psi. electric pumps or air compressors can be tricky, you always pump up a tire to fast and miss your target haha.
Question:	can this be used on a presta valve bike tire? like a road/racing bike with french/uk valves
Answer:	Hi Juan, Thank you very much for your question. Yes, all of the products you purchase from PRO BIKE TOOL are covered by our brilliant lifetime warranty. Hope this helps! Tom PRO BIKE TOOL
Question:	Please help does it has a pressure bleed bottom
Answer:	H Stephanie, I am very sorry, no we do not have such a product. Since very few, if any, Shock pumps us a Presta Valve connection. Thank you Tom PRO BIKE TOOL

Product description

absorbers!



High Quality--Diyife shock pump is Made of high-quality aviation aluminum alloy, which gives our pumps excellent durability and reliability.



The pump head has a waterproof scratch-resistant rubber hose that is comfortable and durable.



Lightweight &Portable



Ergonomic Design

Ergonomic handle, the handle adapts to the ergonomic design.It is just 23cm length and 178g weight, which is easy to carry.

With a collapsible hose and portable design, the pump can be placed in a backpack when traveling, which does not take up space.





Though it is a mini pump, with a maximum pressure of 300 psi.



Wide Range of Application



It is suitable for all hydraulic shock absorbers and the perfect partner for your bicycle, motorcycle and wheelchair.

【NOTE】It only fits for Schrader valve for mountain bike.Specifications:



Material: Aluminum alloy

Color: Black & Silver

Length: 23cm/9.05in

Weight: 178g



Package Included:



1 x 300PSI Shock Pump

1 x Manual

• 【300PSI-High Pressure Shock Pump】 The Max PSI it reaches : 300 PSI . High-quality aviation aluminum alloy body with high sealing capacity.The rubber hose with 360° pivot inflation connecting pipe and air nozzle can be rotated freely, multi-angle use, easy and convenient, will make your pumping easier.
• 【High Quality & Durability & Lightweight】 The lever body is made of high quality aluminum alloy, which gives our pumps excellent durability and reliability. Long service life, good sealing effect and no air leakage. It is easy to carry as it is just 23 cm. It can be fixed on a bicycle or put in a backpack when traveling.The pump head has a waterproof rubber hose that is scratch resistant, comfortable and durable.
• 【With Gauge & Air Bleed Button】The shock pump comes with air pressure fine adjustment valve, pressing this air pressure release button can release 2-3PSI once time. It is easily adjust the air pressure value. Besides, it is With gauge, you can see the pressure when you pump up air. Meeting all of your cycling needs.Choose us!
• 【Multifunction】 It is suitable for all hydraulic shock absorbers, wheelchairs, medical wheelchair shock absorbers. It can also be used to hit a bicycle tire, ONLY fitting for the schrader (mountain bike). It would be a perfect partner for your bicycle.