8 best mountain bike shock

• Spring Rate: 750lbs Damping: 2-system Adjustments：Rebound / Preload
• Damper shaft：Hard chromed shock Ø 10 mm ( 0.39 inch ) shaft
• Dark hard-anodized AL-6061 shock body. Coil spring, Riding style：XC / AM, High-quality surface finished. 750LBS
• Top Busing Size 8mm x 24mm Bottom Bushing Size 8mm x 24mm, Includes extra bushing and hardware 8mm x 50mm Length.
• Made in Taiwan, We're so confident about our product quality that we can provide a LIFETIME WARRANTY!

User questions & answers

Question:	Why can’t you ship to Canada
Answer:	Use the amazon.ca website.
Question:	Opinions on this shock vs an air shock? my bike mechanic says air shocks can be a headache and suggested a coil. would replace fox float rp
Answer:	Match the measurements from the original shock to the new one the length is not as critical as you may think.
Question:	Will this fit a Gary fisher sugar
Answer:	not sure
Question:	I want this rear shock but in 150mm eye to eye. Does anyone know if this size is even available at some other merchants
Answer:	A half centimeter is not much of a difference my bike had a 150mm length shock and I replaced it with this 156mm shock the brake/ shift cables might need a little adjustment but it will work. Do some measuring and see if it will work.

Product features

Please Watch The Video In The Listing For How To Choose and Install The Shock.

• PRODUCT SPECIFICATION: Adjustments Preload, Hard Chromed Shock Ø 10 Mm ( 0.39 Inch ) Shaft.Dark Hard-anodized Al-6061 “in One Piece” Shock Body, Riding style XC / Electric wheelchair.
• EXTRA BUSHINGS INCLUDED: Top busing size: 8mm x 24mm; bottom bushing size: 8mm x 24mm and extra bushing 8mm x 50mm length. We have included an additional set of bushings for easier installation, please see 2nd picture. (Please also watch the video in the listing for how to choose the size and install a shock).
• AVAILABLE SIZE: Available Size 165 × 35 mm ( 6.5 × 1.38 inch) ,190 × 50 mm ( 7.48 × 1.96 inch) 200 × 50 mm ( 7.87 × 1.96 inch) Weight: 0.2 KG(0.44 Ib) for 165 mm Length.

Good Value

This is a coil shock. For normal dual suspension bikes and wheel chairs. NOT for serious off road or downhill riding.

Rebound adjustment

When your rebound is set properly the bike will settle quickly after a bump, it won’t continue to bounce, and although you will feel the bump it will be smoother

EXTRA BUSHINGS INCLUDED

Please also watch the video in the listing for how to choose the size and install a shock).

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories.

WIDE SELECTION

With more than 2000 high quality and best value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from the factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

• FEATURES: Adjustments：Rebound, air pressure adjustable and lock out (Please note: The shock could NOT be completely locked.) Damper shaft: Dark hard-anodized AL-7075, Ø 10 mm (0.39 inch). Shock Body: Dark hard-anodized AL-6061. Riding style XC /TRAIL
• EXTRA BUSHINGS INCLUDED: Top busing size: 8mm x 24mm; bottom bushing size: 8mm x 24mm and extra bushing 8mm x 50mm length. We have included an additional set of bushings for easier installation, please see 2nd picture. (Please also watch the video in the listing for how to choose the size and install a shock).
• QUALITY: Air shock is much lighter than coil shock. This is a great upgrade from the old shock. It is precisely CNC machined to ensure no air or oil leaking. The negative air valve could possibly touch some frames, so DNM developed the new 38RC shock without negative air valve.
• BIGGER AIR CHAMBER: The new 38RC shock comes with bigger air chamber which provides better performance. The air chamber is made of stronger forged alloy 6061.
• BAROMETRIC RECOMMENDATION; Weight 120 lbs - Main air chamber 90 Psi. Weight 140 lbs - Main air chamber 105 Psi. Weight 160 lbs - Main air chamber 120 Psi. Weight 180 lbs - Main air chamber 135 Psi. Weight 200 lbs - Main air chamber 150 Psi. Weight 220 lbs - Main air chamber 165 Psi. ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide 2-year warranty! Made in Taiwan.

User questions & answers

Question:	Does anybody know the actual travel for the 190 mm shock, or why do different lengths have the same travel
Answer:	Hi, the travel is 53mm.
Question:	Will this work on a mongoose detour
Answer:	If the eye to eye measures 190mm you should be good just make sure to keep your bushings or replace them
Question:	Does a seal or service kit exist for this shock for regular maintenance
Answer:	So far Damper works great, so I wasn't thinking about servicing. There is no air or oil leaking. Everything after few months use is ok.
Question:	What is the difference between this and the dnm damping 3 system
Answer:	This shock doesn’t have the negative air adjustment. I bought this shock because it doesn’t have the negative air adjustment and I think it is better suited for a cross country bike rather than down hill. It is a very nice working shock by the way. I replaced a pretty expensive Fox shock with it because it was about half of what it would have cost to get the Fox shock repaired. Also it is very easy to adjust to get a good ride. Buy one, you will like it.

Product features

Please Watch The Video In The Listing For How To Choose And Install The Shock.

• FEATURES: Adjustments：Rebound, air pressure adjustable and lock out (Please note: The shock could NOT be completely locked.) Damper shaft: Dark hard-anodized AL-7075, Ø 10 mm (0.39 inch). Shock Body: Dark hard-anodized AL-6061. Riding style XC /TRAIL, Available size: Eye to eye x travel 165mm 6.5" x 35mm, 190mm 7.48" x 35mm, 200mm 7.87" x 53mm and 210mm 8.3" x 53mm.
• EXTRA BUSHINGS INCLUDED: Top busing size: 8mm x 24mm; bottom bushing size: 8mm x 24mm and extra bushing 8mm x 50mm length. We have included an additional set of bushings for easier installation, please see 2nd picture. (Please also watch the video in the listing for how to choose the size and install a shock).
• QUALITY: Air shock is much lighter than coil shock. This is a great upgrade from the old shock. It is precisely CNC machined to ensure no air or oil leaking. The negative air valve could possibly touch some frames, so DNM developed the new 38RC shock without negative air valve.
• BIGGER AIR CHAMBER: The new 38RC shock comes with bigger air chamber which provides better performance. The air chamber is made of stronger forged alloy 6061.
• BAROMETRIC RECOMMENDATION; Weight 120 lbs - Main air chamber 90 Psi. Weight 140 lbs - Main air chamber 105 Psi. Weight 160 lbs - Main air chamber 120 Psi. Weight 180 lbs - Main air chamber 135 Psi. Weight 200 lbs - Main air chamber 150 Psi. Weight 220 lbs - Main air chamber 165 Psi.

Lock Out

Using lock out feature when you are riding on flat road. Please note: "Lock Out" does NOT mean completely solid.

A Set Of Bushings

You need to modify (Cut) the bushings to fit your bike.

Performance

The bike will be lighter and looks beautiful with air shock installed.

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories.

WIDE SELECTION

With more than 2000 high quality and best value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from the factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

• PRODUCT SPECIFICATION: Adjustments Preload, Hard Chromed Shock Ø 10 Mm ( 0.39 Inch ) Shaft.Dark Hard-anodized Al-6061 “in One Piece” Shock Body, Riding style XC / Electric wheelchair,
• EXTRA BUSHING INCLUDES: Top Busing Size 8mm x 24mm Bottom Bushing Size 8mm x 24mm, Includes extra bushing and hardware 8mm x 50mm Length. We Have Included An Additional Set Of Accessories To Meet The Different Size Requirements Of Some Customers Please see 2nd Pictures
• AVAILABLE SIZE: Available Size Eye to Eye x Travel 150 x 30 mm ( 5.9 x 1.18 inch) 160 x 35 mm ( 6.23 x 1.38 inch) 165 × 35 mm ( 6.5 × 1.38 inch) Weight: 0.2 KG(0.44 Ib) for 165 mm Lenght
• DNM QUALITY: ORDER NOW, WORRY FREE! Made in Taiwan We're So Confident About Our Product Quality That If You Have Any Product Issues, We’re Very Happy To Either Provide A Refund Or A Replacement On Your Purchase! We’re Also Here To Support You If You Have Any Questions Or Queries, Please Get In Touch And We’ll Gladly Help.

User questions & answers

Question:	Can this be purchased with a 1100 pound spring rather than a 750 pound spring
Answer:	That's a question for DNM to answer - email them directly, maybe?
Question:	Do these have any gas inside or just the spring
Answer:	I haven't dismantled it, but no valve to add gas so probably just oil damper, feels pretty decent for the price.
Question:	to be clear this is a 6" bike shock right
Answer:	yes, it is located near the middle of the frame, and it softens the shock on the rider as it is used on a 2 part frame that moves a little as 2 separate parts connected together by this shock. This allows the rear tire to move up and down a little if you hit big bumps or jump the bike.
Question:	mm bushing? any ideas on how to make that work before I drill the hole to 8 mm? thanks
Answer:	I swapped in the 6mm ID sleeves from the old shock, since they have the same 12mm OD as the steel sleeves that come with it. The piston side sleeve was very tight, and I used a press just because I have one anyway. Had to shave the plastic spacers a bit too, for my application.

Product features

Please Watch The Video In The Listing For How To Choose and Install The Shock.

• PRODUCT SPECIFICATION: Adjustments Preload, Hard Chromed Shock Ø 10 Mm ( 0.39 Inch ) Shaft.Dark Hard-anodized Al-6061 “in One Piece” Shock Body, Riding style XC / Electric wheelchair.
• EXTRA BUSHINGS INCLUDED: Top busing size: 8mm x 24mm; bottom bushing size: 8mm x 24mm and extra bushing 8mm x 50mm length. We have included an additional set of bushings for easier installation, please see 2nd picture. (Please also watch the video in the listing for how to choose the size and install a shock).
• AVAILABLE SIZE: Available Size Eye to Eye x Travel 150 x 30 mm ( 5.9 x 1.18 inch) 160 x 35 mm ( 6.23 x 1.38 inch) 165 × 35 mm ( 6.5 × 1.38 inch) Weight: 0.2 KG(0.44 Ib) for 165 mm Length.
• QUALITY: DNM produces high quality shocks and forks in the cycling, motorcycle and wheelchair industry. This is a great upgrade from the old shock. It is precisely machined to ensure great permanence.

Good Value

This is a budget coil shock. Great for normal dual suspension bikes and wheel chairs. NOT for serious off road or downhill riding.

Precisely Machined

DNM produces quality shocks.

Coil Shock

The coil shock is very reliable.

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories.

WIDE SELECTION

With more than 2000 high quality and best value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from the factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

Product description

Name: MTB bicycle Shock Absorber.

Version: Air system shock absorber

Size: 165mm/ 190mm/ 200mm/ 210mm

Bushing length: 24x24mm

Inner diameter: 8x8mm

Travel:

165mm: 35mm

190mm: 50mm

200mm: 53mm

210mm: 53mm

Features:

Adjustable damping

Compression adjustment

Air pressure soft and hard

Adjust suspension lock

Weight: 

165mm: 264g

190mm: 278g

200mm: 286g

210mm: 282g

Version: Manual lockout, Remote lockout, adjustable damping.

Application: XC Soft tail mountain electric bike

Color: black

 Features: Air shock absorber, light weight, good quality, superior function, suitable for all kinds of harsh roads, the highest air pressure of AO-38RC can reach 270ps!

 PACKAGE INCLUDW:

 Manual lockout

Bike air shock absorber: * 1

Bushing: * 2

 Remote lockout

Bike air shock absorber: * 1

Bushing: * 2

Remote lock line: * 1

• Mountain bike Air Shock Absorber. 165/ 190/ 200/ 210 mm. Bushing length is 24 x 24mm, inner diameter of eye is: 8 x 8mm.
• QUALITY: Air shock is much lighter than coil shock. It is precisely CNC machined to ensure no air or oil leaking.
• Feature: High strength and durability, Anti-fracture and anti-corrosion.
• BIGGER AIR CHAMBER: The shock comes with bigger air chamber which provides better performance. The air chamber is made of stronger forged alloy 6061.
• BAROMETRIC RECOMMENDATION; Weight 120 lbs - Main air chamber 90 Psi. Weight 140 lbs - Main air chamber 105 Psi. Weight 160 lbs - Main air chamber 120 Psi. Weight 180 lbs - Main air chamber 135 Psi. Weight 200 lbs - Main air chamber 150 Psi. Weight 220 lbs - Main air chamber 165 Psi.

Product description

MTB Bicycle oil spring shock absorber, electric bike, snowmobile, mountain bike rear shock absorber



Parameter:

● Product name: spring rear shock absorber

● Material: aluminum alloy

● Length: 125mm,150mm,165mm,185mm

● Bushing length: 24 /68 /52 mm

● Inner diameter: 8 mm

● Weight: approx. 500 g

● Applicable: XC Soft Tail Mountain Electric Bicycle

● Features: high strength and durability, improved shock absorption performance and reduced collision.

● Color: black



Note: 850 lbs/750 lbs corresponds to a body weight of 75 kg, and 1000 lbs corresponds to a body weight of about 90 kg. The shock absorption effect of riding is the most comfortable.



Items in the package:

● spring rear shock absorber * 1



[100% Satisfaction Guarantee] -Guarantee Quality / Guarantee Customer Service / Guarantee Service. If you have any doubts, we will give you a satisfactory answer within 24 hours.

• 1.【Product name】: Bicycle oil spring shock absorber, electric bike, snowmobile, mountain bike rear shock absorber. 125*850lbs , 150*750lbs , 150*1000lbs , 165*750lbs , 165*1000lbs , 185*750lbs , 185*1000lbs.
• 2.【Specification】: Sleeve length 24 /68/52 mm, inner diameter of the eyelet 8 mm
• 3.【Technical specifications】: Soft Tail Spring Damper. High strength and durability, shock absorption performance with improved performance. Replace a malfunctioning rear shock on your mountain bike with new shock absorbers
• 4.【Applicable】: XC soft tail mountain electric bike, mountain bike, scooter, folding bike and other shock absorbing bikes. Reduce bumps on the road.
• 5. 【100% satisfaction guarantee】: Guarantee quality / guarantee customer service / guarantee service. If you have any doubts, we will give you a satisfactory answer within 24 hours.

Product description

Description

Are you looking for a professional, yet affordable rear shock? Are you in search of a sturdy, trustworthy tool that can do multiple jobs at once? If yes, look no further! Our professional rear shock must meet you needs. It is one of the best choices for you.



Features

- Color: As shown.

- Size: 15 x 2.5 x 2.5 cm.

- Material: Steel.

- Adjustable preload spring tension.

- Protect the shock absorber and keep it clean.

- Easily upgrade the look of your car.

- Applicable: mountain bike, bicycle, folding bike.

- Dear buyer, due to lighting effect, monitor's brightness, manual measurement, etc., there could be some slight differences in the color and size between the photo and the actual item. Sincerely hope that you can understand! Thank you!



Package Including

2 x rear shock

• Protect the shock absorber and keep it clean.
• Easy to install and use the right tools.
• Easily upgrade the look of your car.
• Applicable: mountain bike, bicycle, folding bike.
• Adjustable preload spring tension.

User questions & answers

Question:	Some of the pictures show 2 shocks that are the same size. 1 picture shows 2 shocks that are different sizes. What do you get when you buy this
Answer:	Package Including 2 x rear shock Size: 15 x 2.5 x 2.5 cm.

Product description

Name: Folding bicycle front fork



Specifications: 20 inches



Spring: mechanical type, stroke: 100MM



Inner tube: seamless steel tube 28.6mm



Standpipe: steel 28.6*210mm



Axis: 9mm, fork legs: Lu alloy 25.4mm



Fork Shoulder: Forged Aluminum Alloy



Features: high efficiency shock absorption, high-end exquisite



Mechanical system: You can adjust the comfortable air pressure value according to the rider's weight and riding conditions to achieve a better experience.



Shoulder control switch: Select to open or close the suspension adjustment according to different road conditions.



Independent fork bridge design: make the outer legs of the front fork more stable and stronger, effectively prevent the stroke tube from being polluted by dust, beautifully painted and bright and beautiful.

• Name: bicycle front fork, color: black
• Material: aluminum alloy + steel, process: shoulder control shock absorber
• Spring: Mechanical type, suitable for: 20 inch bicycle
• Features: High-efficiency shock absorption for fork shoulders Itinerary 100MM
• Product specifications: vertical tube aluminum alloy 28.6*210mm / inner tube 28.6mm / shaft 9mm / fork legs: aluminum alloy 25.4mm

User questions & answers

Question:	How wide an opening does it fit, that is where shock is bolted to the frame
Answer:	the bolt is metric and its little bit smaller then 3/8'' i dont know what size that is in metric. the shock ends are approximately 1 and 1/4 od
Question:	What is the center to center dimension of this shock absorber
Answer:	The shock when shipped measured 6" in on center. the shock has a retaining nut for the main spring, this can allow you to make minor adjustments. I was able to adjust main 1/8" either way with ease.
Question:	How wide is the spring
Answer:	Roughly about 1.5 inches to 1.625

Product description

Specifications:

Using air as the spring medium, the A5-RE/RR1 offers excellent tunability without sacrificing weight.

RR1: Preload and top out can be infinitely tuned by adjusting the pressure in the main and negative air chambers.

RE: the solo air shock A5-RE can only adjust preload.

 

Item Name: Bike Rear Shock Absorber

Material: Aluminum Alloy

Style: RR1: Dual Air Chamber, RE: Solo Air Chamber

Length: 125mm/4.92", 150mm/5.91", 165mm/6.50" (Approx.)

 

Notes:

Due to the light and screen setting difference, the item's color may be slightly different from the pictures.

Please allow slight dimension difference due to different manual measurement.

 

Package Includes:

1 x Bike Rear Shock Absorber

• RE:the solo air shock A5-RE can only adjust preload
• Quality assurance:Every product has been tested by professionals and it can be used with confidence
• RR1:Preload and top out can be infinitely tuned by adjusting the pressure in the main and negative air chambers
• Good performance:Using air as the spring medium,the A5-RE/RR1 offers excellent tunability without sacrificing weight
• Professional:Excellent performance,exquisite processing technology,good material selection,making it both strong and ultra-light with superior performance in use