14 best bike rack parkings

Product description

BIke Rack

• Stable floor rack for holding up to 5 bicycles, good for 12'' to 26'' bikes
• Easy to assemble and adjustable (from 1 to 5 compartments), no hardware needed
• Fine Powder Coated Steel resist in all weather condition
• Dimension: 70''L x 14.75''W x 14''H. 12''L for each compartment
• The width of wheel holder could stretch from 2.5'' to 3.5'' and is able to hold road bike, MTB, beach cruiser

User questions & answers

Question:	Can anyone tell me what size the screws are? Mine didn’t come with any
Answer:	it will not heat that area for automatic waterer only
Question:	Is this only for bikes with kickstands? Will bikes with no kickstand stay upright
Answer:	I can't speak for the maker but there are exposed connections and the switch which would definitely short out is submerged. Dampness should not be a problem.
Question:	Does this work for kids bikes
Answer:	hot enough to brand you if you touch it
Question:	I read description, however, will 5 29er’s fit
Answer:	The coil at the top becomes hot and will melt plastic. I guess I do not know what type of waterer you are talking about. I built a small cage around the ones I purchased from Amazon to make sure they would not touch any plastic parts. BUT--there is not a lot of extra room under mine so be sure to measure first so it will still fit. Behlen Country AHW80 Electric Heated Cattle & Horse Waterer is similar to what I have for our beef cattle.

Product description

The Hollywood PS10 “dual use” systems can be assembled as either a maximum capacity “double sided” 10 bike parking rack or a space saving single sided 5 bike parking rack. Featuring heavy duty welded steel construction and a “park equipment” grade exterior finish, these racks are suitable for both commercial and residential use. Includes anchor holes for bolting to concrete, and can be connected to adjacent units with optional accessory. Fits both wide and narrow tire sizes, and is easily assembled. ED-Zinc undercoat plus “park equipment” grade powder coat finish. Grid and side rails are welded. 1 1/2 inch x 14 gauge steel side rails and horizontal tubes. 1 inch x 16 gauge steel vertical tube.

• Can be assembled as either a double sided 10 bike parking rack or a space saving, single sided 5 bike parking rack
• Outdoor commercial quality bike stand with ED-Zinc undercoat plus “park equipment” grade powder coat finish
• 1-1/2” x 14 gauge steel side rails and horizontal tubes; 1" x 16 gauge steel vertical tubes
• Maximum bike tire width is 2.35
• Can be bolted to concrete or other surfaces

User questions & answers

Question:	Will 5 adult bikes fit comfortably on one side? I am reading about other bike racks where they don't actually hold the # advertised
Answer:	I have no idea how the closetmaid shelves work; but, the basic rubbermaid concept is that the rail attaches to the wall and the individual brackets then attach to the rail. There are assorted brackets for specific uses like bikes, tools, weed wackers, etc.
Question:	how big a bike wheel will this accommodate
Answer:	I have my bottom shelf about two feet up that way I could use the floor as an extra shelf and it works fine
Question:	Is it required that the rack is bolted down or attached to something. In my case I do not want to have to attach it to anything. Thank you
Answer:	All you need is a screwdriver. I'm 56, 5'2" and was able to put it together by myself. It is extremely sturdy and I have A LOT of boxes of very heavy weight on it. Love it
Question:	what is the width of the rack
Answer:	I bought two shelves for my garage after downsizing to a smaller home. I have them stacked and double stacked with tubs of holiday decorations, boxes of books, etc. they show no strain. I would guess they would hold about anything you can fit on them!

• 1-6 RACKS – Our bike parking rack holds up to 6 bicycles. It is assembled by one piece of rack so you can free assemble from 1 to 6 racks. When you only have 3 bikes, you could assemble 3 racks while you only need to add one more rack when buying a new only. Besides, order a new one and connect with the old one, you can get 10 rack at most.
• EASY TO ASSEMBLE & STORE – All the accessories (screws and nuts) and an instruction are coming in the package. One adult can assemble 6 racks in minutes with the instruction. The bike can be placed in different directions to use your space wisely.
• SAFE & CONVENIENT – You do not need to reply the wall to support your bicycle. The stand can hold it and avoid tilting and protect bikes from being damaged or scratching from other stuffs or the wall. As for a small business, have the bike rack and use signage to direct bicyclists to the area you designate for bike parking is convenient and build a good corporate image.
• STABLE – The tubes of Hromee bike stand are made of thick steel and the coating, anti-rust, providing the ability of resisting all bad weather so set it up outside or in a garage or basement to park a family of bikes are all available.
• DIMENSIONS - Six bike stand Overall Dimension: 63.2“L x 11.2"W x 9.5"H Net Weight: 16.6 lbs. Tire Rack Width: 2”. Our bike rack fits for all standard child, BMX, road and mountain bikes. The width of rack for wheels is 2 inches so please measure your wheel. If you have any size questions, please feel free to contact us.

User questions & answers

Question:	Can you back a road bike in or will the derailleur hit
Answer:	The Raxgo bike rack is about 6' 7" tall and with bikes you need about 5' 7" in length.
Question:	I teach and have several cardboard " files" for posters. I need something to stand them upright and separate the folders so I'm not having to unstack
Answer:	This would not make a good repair stand as the bike does not lock into the stand. You will not be able to turn the cranks or tension any bolts without the bike swinging all over the place and possible falling off the stand. You can buy pretty cheap bike repair stands on Amazon that could double as a bike rack.
Question:	What tools are needed to assemble this
Answer:	The height is as advertised right at 81.5 inches and that is correct. The width that you need is the width of your bike from front tire to back tire. The arms that hold the bikes are adjustable to whatever height you want and are easy to position. If you put the upper bike all the way to the top, the seat and handle bars could go above the 81 inches. I have my rack adjusted with the lower bike 1 inch from the floor and the second bike just above it with enough clearance to get both bikes on and off easily. Overall, it wasn't too bad to assemble and is very easy to use.
Question:	If you wanted the bike to go in all on an angle instead of straight could you adjust if that way
Answer:	I haven’t had it fall over with only the top bike on it so I would say it is stable

Product features

1-6 Racks DIY Free Choice

Hromee bike parking rack holds up to 6 bicycles. It is assembled by one piece of rack so you can free assemble from 1 to 6 racks. When you only have 3 bikes, you only need to assemble 3 racks while you only need to add one more rack when buying a new only.

Safe & Convenient

You do not need to reply the wall to support your bicycle. The stand can hold it and avoid tilting and protect bikes from being damaged or scratching from other stuffs or the wall.

Easy to Assemble

All the accessories (screws and nuts) and an instruction are coming in the package. One adult can assemble 6 racks in minutes with the instruction. The bike can be placed in different directions to use your space wisely.

• STABLE: We have redesigned our value bike floor rack. The unique 2 holding plates both with tire grooves are at optimized holding angle. This fantastic feature ensures bikes vertically held in the bike stands. Please insert your bikes in different directions in order to fit 5 bikes in the stand. For example: One front wheel, the second one back wheel. Or please reverse one or more the bike holder(s), so the bikes could be inserted from both sides if there is large space.
• STRONG: The stand is made of quality steel. Also powder coated black finish is for long lasting. It is recommended to be used indoor only. The front and back plates holding system prevents the up holder (supporting the wheels) getting wider at the top. The wide holder will affect the bike holding stability.
• EASY TO USE: The bike stand holders are all linked together, so the stand is heavier and more solid than single bike stand. Please watch our detailed instruction video in the listing.
• COMPATIBILITY: The rack is designed for all wheel size bikes from the range of 12" to 20" kids bikes, 20" to 24" BMX bikes, 26" to 29" MTB and 700c road bikes. Max tire width: 2.5". Limitations: 12" to 20" kids bikes only sit in the front holder, so please insert the back into the hold. Disc rotor could touch the bike rack although it would not bend. Bike hubs may touch the bike stand holders too.
• ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide 5-year warranty!

User questions & answers

Question:	How do i secure the product to the garage floor
Answer:	I'm sure you could glue it or bolt it, but I chose leave it as is. I simply put my foot on the rack when taking a bike out of the rack. This also gives me the flexibility to detach part of the rack and move it to a different location for 1 or 2 bikes while leaving the rest of the rack in place. This provides me with options and flexibility for multiple uses of the rack.
Question:	Does this come with the needed hardware/screws. I've read of someone that don't so I want to make sure it comes with everything needed
Answer:	It comes complete as seen with quick adjustable pins. No tools or hardware needed
Question:	Does this accommodate 12” bikes up to 29” bikes
Answer:	I’m not sure about the 12 inch bikes, because we have larger bikes stored in it, but I would think they would fit. 29 would definitely fit. We have 24 and 26 inch stored in it.
Question:	Could you alternate the holders front to back to be able to put bikes in from both sides
Answer:	I just looked at the bycycle rack I have. The upright tire holders look like they are reversable, so I would venture to say YES, you can setup the rack to have bikes on both sides, but still one tire per holder.

Product features

US Patent Pending: Number: 16/680,494

• STABLE: We have redesigned our value bike floor rack. The unique 2 holding plates both with tire grooves are at optimized holding angle. This fantastic feature ensures bikes vertically held in the bike stands. Please insert your bikes in different directions in order to fit 5 bikes in the stand. For example: One front wheel, the second one back wheel. Or please reverse one or more the bike holder(s), so the bikes could be inserted from both sides if there is large space.
• STRONG: The stand is made of quality steel. Also powder coated black finish is for long lasting. It is recommended to be used indoor only. The front and back plates holding system prevents the up holder (supporting the wheels) getting wider at the top. The wide holder will affect the bike holding stability.
• EASY TO USE: The bike stand holders are all linked together, so the stand is heavier and more solid than single bike stand. Please watch our detailed instruction video in the listing.
• COMPATIBILITY: The rack is designed for all wheel size bikes from the range of 12" to 20" kids bikes, 20" to 24" BMX bikes, 26" to 29" MTB and 700c road bikes. Max tire width: 2.5". Limitations: 12" to 20" kids bikes only sit in the front holder, so please insert the back into the hold. Disc rotor could touch the bike rack although it would not bend. Bike hubs may touch the bike stand holders too.

Front & Back Brackets

Two brackets with tire grooves design maximizes the stability. Please note for small size wheel bikes (smaller than 26"), the tire may touch one bracket (front) only.

Smart Tire Bracket

The bracket fits skinny road bike tire and mountain bike tire (max width: 2.5").

Holder Direction Reversed

Reverse the holders' direction, so the bikes could be inserted from both sides if there is large space.

Easy Set Up

Please watch the video in the listing.

Touching Bike Parts

Could touch the chain or cassette.

Touching Disc Rotor

Could touch the disc rotor.

• STABLE: We have redesigned our value bike floor rack. The unique 2 holding plates both with tire grooves are at optimized holding angle. This fantastic feature ensures bikes vertically held in the bike stands. Please insert your bikes in different directions in order to fit 3 bikes in the stand. For example: One front wheel, the second one back wheel. Or please reverse one or more the bike holder(s), so the bikes could be inserted from both sides if there is large space.
• STRONG: The stand is made of quality steel. Also powder coated black finish is for long lasting. It is recommended to be used indoor only. The front and back plates holding system prevents the up holder becoming wider. The wide holder will affect the bike holding stability.
• EASY TO USE: The bike stand holders are all linked together, so the stand is heavier and more solid than single bike stand. Please watch our detailed instruction video in the listing.
• COMPATIBILITY: The rack is designed for all wheel size bikes from the range of 12" to 20" kids bikes, 20" to 24" BMX bikes, 26" to 29" MTB and 700c road bikes. Max tire width: 2.5". Limitations: 12" to 20" kids bikes only sit in the front holder, so please insert the back into the hold. Disc rotor could touch the bike rack although it would not bend. Bike hubs may touch the bike stand holders too.
• ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide 5-year warranty! Made in Taiwan.

User questions & answers

Question:	how long is the (3 bike stand
Answer:	No it would not hold the weight of a deck of any size. Shelving only
Question:	What is the entire width and length of the 3-bike holder
Answer:	This item, Rubbermaid 5G71 FastTrack 25 Inch Upright, is only the vertical piece. The horizontal FastTrack needs to be purchased separately.
Question:	I would be placing it in a carport. Will it rust
Answer:	Yes, I mounted to directly concrete block with Tap-cons. Solid.
Question:	Is it possible to configure this setup to only use 2 out of the 43spaces? Meaning turn this into a 2 space unit only
Answer:	I ordered three of these upright rails to hang from the rubbermaid track system; the track system itself holds a great deal, so, each set of two or three of these racks can possibly hold also a good amount of weight. It might depend on what you use for a shelf. I used a board width.

Product features

US Patent Pending: Number: 16/680,494

• STABLE: We have redesigned our value bike floor rack. The unique 2 holding plates both with tire grooves are at optimized holding angle. This fantastic feature ensures bikes vertically held in the bike stands. Please insert your bikes in different directions in order to fit 4 bikes in the stand. For example: One front wheel, the second one back wheel. Or please reverse one or more the bike holder(s), so the bikes could be inserted from both sides if there is large space.
• STRONG: The stand is made of quality steel. Also powder coated black finish is for long lasting. It is recommended to be used indoor only. The front and back plates holding system prevents the up holder becoming wider. The wide holder will affect the bike holding stability.
• EASY TO USE: The bike stand holders are all linked together, so the stand is heavier and more solid than single bike stand. Please watch our detailed instruction video in the listing.
• COMPATIBILITY: The rack is designed for all wheel size bikes from the range of 12" to 20" kids bikes, 20" to 24" BMX bikes, 26" to 29" MTB and 700c road bikes. Max tire width: 2.5". Limitations: 12" to 20" kids bikes only sit in the front holder, so please insert the back into the hold. Disc rotor could touch the bike rack although it would not bend. Bike hubs may touch the bike stand holders too.

Front & Back Brackets

Two brackets with tire grooves design maximizes the stability. Please note for small size wheel bikes (smaller than 26"), the tire may touch one bracket (front) only.

Smart Tire Bracket

The bracket fits skinny road bike tire and mountain bike tire (max width: 2.5").

Holder Direction Reversed

Reverse the holders' direction, so the bikes could be inserted from both sides if there is large space.

Easy Set Up

Please watch the video in the listing.

Touching Bike Parts

Could touch the chain or cassette.

Touching Disc Rotor

Could touch the disc rotor.

Product description

Features

1.Saving storage space when not use or to carry it into the car when cycling.

2.Dual Arm is better to hold heavy bike than Single Arm Stand.

3.Aluminum alloy material make the bicycle holder light ,only 3.5lbs.



Fit 20"-29" Wheel

20" - 24" Kids Bikes

26" to 29" Mountain Bikes

650c -700c Road Bikes

EXCEPT those bikes with the tires more than 2.4" in width.



Product Size

17.12(L) inch x3.74(H) inch x7.16(W)inch when folded

• 【Foldable & Save Space】:With One-Pull-Knob to fold the stand into a flat shape. SAVING STORAGE when not in use or to carry it into the car when going riding outside. Your bikes will never be lying on the ground or trees anymore.
• 【Quick & Easy Push In】: When you push your bike into stand, it will tilt. Effortless push in the rack, this patented design will be perfect hold your bicycle steady. Seconds Set-up and fold for compact storage to save space, no need tools to install
• 【Fit Multiple Tyre】: It is suitable for 650C -700C Road Bikes, 26"-29" Mountain Bikes and 20"-24" Kids Bikes.Perfect for almost all models of bicycles. Suit for own use home, garage,office and retail applications.
• 【Stong and Durable】: Dual arm is better to hold heavy bike than single arm stand. Aluminum alloy material make the bicycle holder light.
• 【Prevent Scratch】: : Delicate specification coating with engineering plastics on the corner to protect your bike from nicks and scratches. Spring-loaded arm easily hold front wheel without risk of scratching rim or spokes

• steel
• ✔Easy to Assemble: this bike rack is installed easily with included installation instruction and hardware. When it is not in use, you can take this rack apart to save more space.
• ✔Multifunctional Design: This bike storage can keep all your sport equipment in order. It is capable of holding up to 3 bicycles. The top shelf basket is an ideal destination for your footballs, baseballs, basketballs, gloves, etc. The four side hooks are perfect for the tennis rackets, helmets, balance board, skateboard, etc.
• ✔Wide Usage: No matter indoor or outdoor, this bike rack can be used. It is great for garages, basement, front yards, backyards, business front, or back. Most types of bike are easy to put into this bike rack, like road bikes, mountain bikes, hybrid bikes, adult bikes, kid bikes, etc.
• ✔Secure Freestanding Design: Different from wall mounted bike racks, this bike rack doesn't need to be installed on the wall, so it can better protect your families and cherished bike from hurting or damage due to hanging. Made from sturdy steel with black powder coated finish, this bike stand is heavy duty and durable.
• ✔Sized: 91 x 54 x 104cm/ 35.8 x 21.3 x 40.9 inch If you have any problem about this bicycle stand, pls be sure to contact us before leaving a review, we will offer you with a satisfied solution within 24 hours.

User questions & answers

Question:	How wide is the space between the bike slots? Thanks a lot
Answer:	Each slot is 3.9 inch wide, 33 inch tall. The space between them is 7.28 inch wide. Hope it will help you...
Question:	Can this bike stand be used outside? Will it rust
Answer:	Sure, mine is used in the front yard. It works well. This rack is made by steel with powder coated finish, if the weather is not very bad, it will be not easy to rust. We used it for a short time, so far, it is still fine.
Question:	Can this bicycle stand hold kid bikes? How many adult bikes can it work for
Answer:	Yes, this storage works for kid bikes, but a little bit tilted, because the tire is smaller than the holder. If for adult bikes, the handlebar is placed in opposite direction, it fits 3 bikes. If the handlebar is put in same direction, it only holds 2 bikes.
Question:	Do we need to assemble it? Or any tools needed
Answer:	Yes, this bicycle rack needs to be installed, but it is not complicated, it took me about half an hour to finish it. You may need screw driver during the installation, and installation instruction and hardware needed has been included in package.

• This free-standing floor stand is great when you still need the flexibility to move your bike around, whether it’s in your garage, bike store or at a race. Patent design awarded.
• 2 pulleys design with adjustable position. Fits any bikes with wheel size from 24" to 29". Just a simple "slide in" and that's it! ( Max tyre width: 2.4 inch ≈ 60 mm )
• Either front or rear wheel slides in. Sitting in firmly to make the bike standing 100% stable. This rack only touches on the tyre, thus it’s great for any high end bikes. It brings no scratches on the bike’s frames, disc rotors, cassettes, etc.
• Package: 1 bike holder. Required Assembly Tool Included. Solid Powder coated steel frame with rubber protected base. Perfect for cement or timber floor
• Top quality with a LIFE TIME WARRANTY. Made in Taiwan. Product Weight: 1.96 kg = 4.35 lbs

User questions & answers

Question:	How well do these stands work for sideloading? I have a 16 lb cat that likes to jump up on my bike and knock it over in the middle of the night
Answer:	You can adjust the stabilizer wheels to lock the tire in place.. my bike moves an inch or two side to side but won't fall over.
Question:	Will it hold up a 5 inch fat tire bike
Answer:	Looks like the maximum tire width that the front and bottom rollers will accept is about 2-1/2 inches.
Question:	What is the H, W, and Depth
Answer:	33" high, 17"W, 17"D
Question:	What's the maximum tire width that this can accommodate
Answer:	The space between the uprights is 3.5 inches but the plastic pieces the actually cradle the tire can only accommodate a tire width of 2.75 inches.The measurements listed here are actual measurements and not tire sizes.

Product features

Very Simple To Assemble

Video: For those who have difficulties to assemble the rack, please watch our detailed instruction video in the listing.

Quality Steel: Powder coated high quality steel with anti rust coating, great for indoor use. NOT recommend for outdoor.

Stable rack: Precisely machined base joints ensure the stability

Free Standing

This free-standing floor stand is great when you also need the flexibility to move your bike around, wherever in your garage, bike store or at a race. Patent design.

Adjustable for perfect fit

ADJUSTABLE: Fully adjustable pulleys' positions allow the bike sitting firmly in the rack

Slide in

SLIDE IN: 2 pulleys design with adjustable position. Fits any bikes with wheel size from 24" to 29". Just a simple "slide in" and done！ Either front or rear wheel slides in.

Safe to Use (Road Bikes or MTB)

3- POINT back or front tire holding system with adjusted pulley position system.

Sitting firmly to make the bike standing 100% stable. This rack only touches the tire, thus it’s great for any high end bikes. It brings no scratches on the bike’s frames, disc rotors, cassettes, etc.

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories.

WIDE SELECTION

With more than 2000 high quality and best value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from the factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

• Retrospec all-new proprietary rack is designed to fit most bicycles including children's bicycles and bicycles with disc Brakes
• Sturdy floor rack that is easy to assemble and holds 2 bicycles Dimensions 37''L x 14.75''W x 14''H
• Modular design allows for multiple racks to be combined to meet your exact need for bicycle storage
• Fits most wheels sizes from kids to Mountain Bikes (12"-29") and tire widths from 23C-3 0"
• The weather-resistant fine powder steel coating protects from damaging weather conditions

User questions & answers

Question:	How far apart can you space the tire holders for the two bike rack
Answer:	Hello, the top shelf is fixed and holds 40 lbs. The 3 adjustable shelves in the center hold up to 35 lbs. and the lowest shelf (bottom) is fixed and holds 35 lbs. Thank you.
Question:	what space between tire frame
Answer:	Hello, the description is counting the bottom as a shelf. The three middle shelves are all adjustable. The top and bottom/base are fixed into place. Thank you.
Question:	Will it hold 26 moutain bikes with disc brakes, without damaging or rubbing them
Answer:	Hello, the top shelf is fixed into place and cannot be removed. The lower shelves are adjustable and can be removed. Thank you.
Question:	are the bikes too close together
Answer:	It is a thick paperboard backing that is nailed on.

Product features

Retrospec Stash Rack Floor Bicycle Stand

Retrospec's 5-bike storage solution is just what you need to stash your miniature fleet. This rack is simple to assemble, easy to adjust, and requires no hardware in its construction.

Stash Rack is the fastest way to clear up space, eliminate clutter, and streamline your cycle storage - next to selling your bikes, of course (but we know you're not doing that!)

Simple Construction

Retrospec's Stash Rack is incredibly simple to assemble. Choose from 1-5 compartments and assemble in a breeze. Plus, your new rack doesn't require any hardware to get it up and ready-to-go.

Reliable Build

A powder-coated finish protects your stash rack from the damaging elements. Your bike stay safe and secure in one place with individual slots for each

Retrospec

At Retrospec, our ethics are rooted in the earth. We are passionate advocates for more responsible and vigilant efforts to improve the health of our planet. Fueled by a small but mighty team of innovators, we thoughtfully design and develop superior, yet affordable products for life apart from the 9-5. But value is merely a byproduct of our integrity, not the standard by which we measure success.

Retrospec was born from a passion for cycling. Our fixed gear bicycles became a symbol for our commitment to the outdoors and pledge to affordable and green methods of transportation. Since then, we’ve created hundreds of products that help you achieve one goal: taking hold of the outdoors. We have proudly created a space where our mission can flourish, achieve, and conquer the unknown.

• Patented SIMPLE PUSH IN DESIGN - Quick & Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for heavy bikes such as downhill, mountain and beach bikes.
• MOST STABLE BIKE STAND – There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holdder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike.
• FOLDABLE & PORTABLE - A simple one-pull-knob will allow to fold the stand into a flat shape within a second, saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore.
• SUPERB DURABLE QUALITY & STUNNING FINISH TO MATCH YOUR BIKE - Heat treated high quality steel with a fantastic powder coated finish. This stand will last forever if used appropriately. FITS NEARLY ALL BIKES: The bike stand will fit almost all bikes range from Kids Bikes, 26" to 29" Mountain Bikes, 650c -700c Road Bikes, EXCEPT those bikes with the tires more than 2.4" in width.
• ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a LIFETIME WARRANTY!

User questions & answers

Question:	can a child use it? I have a 6 year old and a 9 year old - could they put their bikes in and out of this
Answer:	HI there Thank you for your question. The writing is lasered onto the matte finish, as such if you scratch off the logo it will scratch the paint finish. Kind regards Chris PRO Bike Tool
Question:	Can it be mounted to a pickup bed floor/plywood
Answer:	What’s nice about the way the made the holder As you can see there are two holes and one 3 in slot cut out So If you put it on your bike use one of the pre drilled holes and the slot being cut out will line up Hope this helps
Question:	what are the dimensions
Answer:	Hi there Many thanks for your question. Yes, our bottle cage will fit a polar insulated water bottle, 24oz size. Kind regards Chris PRO Bike Tool
Question:	Anyone have a picture of what the bike looks in it? Trying to see if it keep the whole bike off the floor or just front tire
Answer:	Hi LeilaMany thanks for your question. The bike bottle cage is designed to fit most standard & over sized bike water bottles, including the following sizes: 20, 21, 25, 24, 25 & 33 oz / ounces (500, 550, 650, 750 & 950 ml sizes). If you're finding it's too tight or too loose, you can adjust the wings of the bottle cage to accommodate - just pull apart or push in the wings, the bottle cage is designed to be able to do this. Kind regardsChris PRO Bike Tool

Product features

Just Push In!

• Patented SIMPLE PUSH IN DESIGN - Quick & Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for heavy bikes such as downhill, mountain and beach bikes.
• FOLDABLE & PORTABLE - A simple one-pull-knob will allow to fold the stand into a flat shape within a second, saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore.

Stable

MOST STABLE BIKE STAND – There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike.

Durable

SUPERB DURABLE QUALITY & STUNNING FINISH TO MATCH YOUR BIKE - Heat treated high quality steel with a fantastic powder coated finish. This stand will last forever if used appropriately. FITS NEARLY ALL BIKES: The bike stand will fit almost all bikes range from 20" - 24" Kids Bikes, 26" to 29" Mountain Bikes, 650c -700c Road Bikes, EXCEPT those bikes with the tires more than 2.4" in width.

Sping Holder

The quality spring holding system ensures the bike stand holds the tire tight. The tight holding means that the bike never moves in the holder. This special design is approved to be one of the best in the market. The 3 touching points are all on tires. There is no more scratching on cassettes, hubs, derailleurs, spokes and frames.

Fit All Bikes Up to 2.4" Tire Width

The floor stand is compatible with all size bikes: road bikes with skinny tires, mountain bikes 26", 27.5" and 29", heavy downhill bikes, kids bikes with small 20" and 24" wheels, beach cruisers and e bikes.

Please make sure your tire width is less than 2.4". If it is over 2.4", please look at our another model YC-96FB.

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories.

WIDE SELECTION

With more than 2000 high quality and best value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from the factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

• FLOOR PARKING - The bike rack is designed to make all your bikes stand and hold on the floor organized. In this way, you will never see a mess in your garage. The floor parking design not only saves the space for limited place but also protects your bike from scratch.
• 1-5 RACKS - We send it with tubes and racks apart so you could assemble it to 1 rack, 2 racks, 3 racks, 4 racks or 5 racks according to your requirements. If you need more, just order another one then you could get 8 racks at most.
• STABLE&ANTI-THEFT - The racks are made of 2 curved quality steel tubes with powder coated black finish for strong support and long lasting. Our bike rack can be anchored to the ground with anchors and screws then you could lock the bike and rack for anti-theft.
• DIMENSIONS - The max tire width is 2.5 inches and the height of rack is 10.4 inches so the bike disc rotor or the hub may touch the bike rack. The rack interval is 9.3 inches so you could reverse one or more bikes to avoid the handlebar hits.
• INDOOR&OUTDOOR - For the family, putting it in your garage or garden makes home organized. For a small business, having the bike rack and use signage to direct bicyclists to the area you designate for bike parking is convenient and build a good corporate image.

Product features

1-5 RACKS

We send it with tubes and racks apart so you could assemble it to 1 rack, 2 racks, 3 racks, 4 racks or 5 racks according to your requirements.

DIMENSIONS

The max tire width is 2 inches and the height of rack is so the bike disc rotor or the hub may touch the bike rack.

EASY TO ASSEMBLE

All the accessories (screws and nuts) and an instruction are coming in the package.

• FREE STANDING: No more drilling holes around apartment or garage walls. This free standing bike floor stand is study enough to hold 2 bikes, max 55 lbs per bike. 110 lbs in total. It is great when you still need the flexibility to move your bike around.
• TILTING CRADLES: The adjustable bike holders/cradles tilt to hold bikes with sloping top tubes or aggressive frame geometries. Material: Powder-coated heavy duty steel, sturdy and stable constructed.
• ADJUSTABLE: The cradles height could be adjusted by being bolted on different machined holes on vertical tube. The distance between the two hooks is also adjustable. The adjustment holders fit the most common bike frames.
• STABLE: The specially simply designed "Y" shape base saves the floor space. The strong powder coated high quality steel base is extremely stable. It prevents the bikes falling in any direction. Product Weight: 6.28kg =13.8 lbs
• ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty ! Made in Taiwan.

User questions & answers

Question:	So is this correct there is no height adjustment
Answer:	no height adjustment.
Question:	I have two very light Carbon bikes (road and tri). Will having too light weight compromise stability of this stand
Answer:	I haven't had a problem... I hang my Trek Madone on top & older road bike on the bottom.
Question:	Can 2 bikes be mounted on the top, on opposite sides (instead of placing the mounts on top and bottom
Answer:	It doesn't appear that the mounts will work at the same level up top...perhaps a bit staggered placement may work, depending on the size of the bikes.
Question:	The description says 53 " tall. Is that a misprint
Answer:	I just measured mine and it was 82 inches from the floor to the top. You will need a few more inches to accommodate the bicycle.

Product features

Cradle Hooks

The rack comes with two cradle hooks.

They can be adjusted to fit all types of bike frames, including ladies bike and Y shaped frames.

EVA Coated Hooks

Soft coated hooks protect your frame painting.

Study Base

Very stable base which saves a lot of floor space.

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories.

WIDE SELECTION

With more than 2000 high quality and best value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from the factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

• 111-5/8"L x 26-1/2"W x 31-3/16"H
• Anchors sold separately
• Accommodates bicycles on one side
• Easy assembly

User questions & answers

Question:	Did anyone else improve the sturdiness? I put this together and its still wobbly
Answer:	58" on inside of pipe ...62" overall
Question:	I would be keeping this outside and it would not be covered. Is this all weather and meant for outdoor use? I don’t want this to rust, etc with time
Answer:	You can also buy Hopkins 90144 Firewood Rack Kit. Buy the pack of 1 which includes 2 plastic pieces for $13.42
Question:	How long is the global industrial 9 bike single bike rack, asin boo1ejptde
Answer:	16" long, as in the picture, there is enough room for 4 2X4s.
Question:	Will a bike with 29" wheels fit in this rack
Answer:	Horizontal pieces are secure from underneath through the ShelfLink. There are holes in the top of the ShelfLink that you run a fastener from underneath into the horizontal 2 x 4 members being used for the shelves.

• SAVE SPACE AND ORGANIZED: organize your floor space - keep your garage or indoor space tidy and clutter-free, double-sided rack, park 3 bikes each side, great for apartments, homes, garages, and sheds. It fits most bike types: road, cyclocross, hybrid kids and MTB.
• SAFE & SECURE: it won't exert pressure on the spokes which would not cause damage to the rims and spokes, the touch of the bicycle tires with the ground and the touch of the tires with the pillars ensures the balance of the bicycle.
• SIMPLE TO INSTALL: you just need to screw the cross bars in to put together, it only takes 10-15 minutes. This is compatible with disc brakes too. Portable bike indoor garage or home rack storage,L:89cm W:69cm H:74cm or 35" x 27" x 29"
• FITS SIX BIKES: nicely organized and upright, just make sure to have rear tires in the rack not the front. This allows more room for the handlebars of each bike. It is made of heavy-duty steel tubing.
• ORDER NOW, WORRY FREE! MADE IN TAIWAN, We're so confident about our product quality that we can provide a LIFETIME WARRANTY!

User questions & answers

Question:	will this accommodate fat tire bikes? 4inch diameter tires
Answer:	Yes. The two larger openings are 4 1/2 inches wide.
Question:	How Long (in inches) is this rack
Answer:	The rack is 36" long. The side supports are each 1", leaving 34" available for bike storage--lots of space for 2 bikes on a side. We only had approach from one side in the garage, so we put two racks together to easily store 4 bikes. Have had no issues with this rack, and am gladto have them.
Question:	Can this rack be used outside if it is chained to something heavy
Answer:	Yes, I don't see why it can't be chained to an object that will not easily move. Use practical reasoning when securing your bicycles.
Question:	Will Toddler/Kid bikes fit and stand up
Answer:	Not sure about a toddler bike because of the wheel size, but a kids bike should fit just fine.

Product features

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories.

WIDE SELECTION

With more than 2000 high quality and best value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from leading factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.