13 best electric bicycle conversions

Product description

Notice:

Battery and Charger are Not Included.

Battery Recommendation: Electro kinetic cell battery featured in nominal voltage 48v, nominal capacity 12 to 20Ah is compatible with the motor.

Must to wear a helmet before riding this electric bicycle for protection.

Please go to those automobile repair shop with standard business license for modification.

If you have any question about the compatible Model, please contact our Customer Service before purchasing.

Specification:

Overall Dimension: 25 3/16" x 13/16" (64 x 2 cm)

Axle Length: 6 13/16" (17.3 cm)

Front Dropout Spacing: 3 15/16" (10 cm)

Spokes Length: 6 5/16" (16 cm)

The Number of Spokes: 36

Controller Power: 1000W

Motor Power: 1000W

Motor Voltage: 48V

Motor Rotating Speed: 480 RPM

High Motor Efficiency: 80%

Net weight: 24.25 Lbs (11 kg)

Package Content:

1x 26" Front Wheel with Brushless Hub Motor

1x Electric Controller

2x Hand Brakes

1x Twist Throttle

2x Handle Grips

1x LCD Display

1x Pedal Assist Sensor

1x Controller Bag

1x Battery Connection Cable

1x Fuse Accessory

1x Rope

1x Set of Widing Pipe and Cable Tie

1x Manual

• 1000W 48V 26" Electric Bicycle Front Hub Conversion Kit, fit for 3 15/16" front dropout spacing, with a speed of 28 mile/h (45 km/h), make your bicycle an electric power moped, brushless hub motor for noiseless running, to fully enjoy the pleasure of riding.
• Dual Mode Controller - Motor works under Hall effect and non-Hall effect, extend life for electric bicycle (If the components break down, controller will switch into non-hall effect mode, the motor will still be working ).
• LCD for Data Display - Shows battery condition, speed, distance, PAS, trip time and error codes for troubleshooting, also cruise and assist promotion function can be turned on by operating the LCD display.
• Pedal Assist Sensor - To sense your pedal cadence and accordingly adjust motor turning rate, get power assistant without using throttle, great for a long-distance journey, avoid wrist pain from keep pressing Durable Frame - Aluminum alloy frame for durability and stability.
• Convenient to Use - Twist Throttle makes speed control as a breeze Hand brakes shut off the motor automatically to save energy and improve safety. Environmental Protection - Powered by battery, without carbon dioxide emissions.

User questions & answers

Question:	Will this work hydraulic dic brakes
Answer:	Yes it does matter which way you install it. Right way will drive forward and wrong way will drive backwards.
Question:	the pedal sensor will not fit my schwinn trike . is there another option
Answer:	Kit comes with a twist throttle which can be used independantly of the PAS. But remember, a front wheel drive can be dangerous, if the wheel torques itself loose while riding. I highly recommend a rear wheel drive and a torque arm.
Question:	Does it matter which side the tire’s power adapter is on
Answer:	I think it will be close. It really helps if your frame has the mounts else you might have to get creative.
Question:	Can I accelerate without pedaling, or is this a kit where I have to pedal in order to use the motor
Answer:	From what I understand, any 1500w 52v batteries are only good to use with any E-bike motors that are not rated higher than 1500w 52v and not lower than 500w 48v.

Product description

Notice:

Battery and Charger are Not Included.

Battery Recommendation: Electro kinetic cell battery featured in nominal voltage 48v, nominal capacity 17-20Ah is compatible with the motor.

Must to wear a helmet before riding this electric bicycle for protection.

Please go to those automobile repair shop with standard business license for modification.

If you have any question about the compatible Model, please contact our Customer Service before purchasing.

Specification:

Overall Dimension: 25 13/16" x 1 9/16" (65.5 x 4 cm)

Rim Diameter: 22 7/16" (57 cm)

Axle Length: 6 5/16" (16 cm)

Front Dropout Spacing: 3 15/16" (10 cm)

Spokes Length: 6 5/16" (16 cm)

The Number of Spokes: 36

Controller Power: 1000W

Motor Power: 1000W

Motor Voltage: 48V

Motor Rotating Speed: 470 RPM

Motor Torque: 40 to 45 N.m

High Motor Efficiency: more than 85%

Net weight: 23.5 Lbs (10.66 kg)

Package Content:

1x 26" Front Wheel with Brushless Hub Motor

1x Battery Connection Cable

1x Electric Controller

2x Hand Brakes

2x Handle Grips

1x Thumb Throttle

1x Controller Bag

1x Set of Winding Pipe and Cable Tie

2x Terminal Boxes

1x Manual

• 1000W 48V 26" Electric Bicycle Front Hub Conversion Kit, fit for 3 15/16" front dropout spacing, with a speed of 31 mile/h (50 km/h), make your bicycle an electric power moped, brushless hub motor for noiseless running, to fully enjoy the pleasure of riding.
• Dual Mode Controller - Motor works under Hall effect and non-Hall effect, extend life for electric bicycle (If the components break down, controller will switch into non-hall effect mode, the motor will still be working).
• Durable Frame - Aluminum alloy frame for durability and stability.
• Convenient to Use - Thumb throttle with battery monitor makes speed control as a breeze.
• Hand brakes shut off the motor automatically to save energy and improve safety. Environmental Protection - Powered by battery, without carbon dioxide emissions.

User questions & answers

Question:	what kind of battery is correct for this item
Answer:	Electrokinetic cell battery ( Li, lead-acid, NiMH battery etc.) featured in nominal voltage 48v, nominal capacity not less than 17Ah is compatible with the 48V motor. We sell battery for this bike kit, you may search for ASIN#B00XP53DH4 to get more information.
Question:	What is the rated Amps of the controller
Answer:	21 Amps.
Question:	What is the load capacity on this tire
Answer:	i am over 300 and it move me around very fast dose that help you any
Question:	Am I correct in thinking this kit does not have peddle assist
Answer:	Yes, the peddle assist is not included. Thank you!

Product description

Features:



- 24" Electric Bicycle Front Wheel (Not include tire & battery)

- Suitable Tire Size - 24" x 1.75" to 2.1" (a tire that is 24" in outer diameter and 1.75" to 2.1" in width)

- E-bike Conversion Kit - easy to convert your bike to an electric powered scooter/moped

- 750W powerful brushless gearless hub motor with 25 km/h top speed

- The brake shuts off motor automatically - saves energy and improves safety

- Aluminum rim for strong support & rust resistance

- Thumb throttle with 3 LED battery indicator lights

- If you need to buy a battery, please contact our representatives. Compatible Battery Model: 19LIB002



Specifications:



- Wheel Outer Diameter: 24" (61 cm)

- Hub Length: 6 7/8" (17.5 cm)

- Hub Spacing: 4" (10 cm)

- Rim Width: 1 9/16" (4 cm)

- Suitable Tire Size: 24" in outer diameter & 1.75" to 2.1" in width

- Motor: 36V, 750W

- Net Weight: 19 lbs (8.65 kg)



Package Contents:



- 1x Replacement Front Wheel (Tire Not Included)

- 1x Motor

- 1x Electric Controller

- 2x Brake Pullers

- 1x Thumb Throttle

- 2x Grips

- 1x Carrying Bag

- 1x Rope (color will pick at random)

- 1 Set of Winding Pipes/Zip Ties

- 1x Manual



Notice:



- Must to wear a helmet before riding this electric bicycle for protection.

- Please note that Tire and Battery are NOT included in the package.

- Please go to those automobile repair shop with standard business license for modification.

- If you have any question about the compatible Model, please contact our Customer Service before purchasing.

• 24" Electric Bicycle Front Wheel; E-bike Conversion Kit - easy to convert your bike to an electric powered scooter/moped; Suitable Tire Size - 24" x 1.75" to 2.1" (a tire that is 24" in outer diameter and 1.75" to 2.1" in width)
• 36V 750W powerful brushless gearless hub motor with 25 km/h top speed
• The brake shuts off motor automatically - saves energy and improves safety
• Thumb throttle with 3 LED battery indicator lights; Aluminum rim for strong support & rust resistance
• Tire and Battery are NOT included. Wheel Outer Diameter: 24" (61 cm); Hub Length: 6 7/8" (17.5 cm); Hub Spacing: 4" (10 cm); Rim Width: 1 9/16" (4 cm)

User questions & answers

Question:	My bike tires are 24 X 1.75. Will they still fit the rim that comes with the conversion kit
Answer:	The add says: Conversion Kit for 24" x 1.75" to 2.1" The question was: My bike tires are 24 X 1.75. Will they still fit the rim that comes with the conversion kit ? And the sellers answer is: Dear customer, 24x1.75 tires are not fit for our product. I was going to buy this set up, but I won`t, due to the fact that I have 24" x 1.75" tire
Question:	I installed and hooked up the batteries, (3 12v in series), the wheel vibrates under load. Vibrating when riding. Help please
Answer:	I agree that you should check to make sure the tire/rim are installed correctly. Does the tire/rim spin easily when not being powered? Try suspending the tire/rim and spin it by hand and with power. It might be possible that the motor has bearing issues, but I am only guessing.
Question:	how many miles will this go
Answer:	100,000 miles if you maintain it. But if you're talking per trip, it totally depends on the amp hour capacity of your batteries. My 4 month old18ah batteries give me about 5 solid miles without pedaling with my 200lbs body.
Question:	What kind of battery should I get to power this
Answer:	I use this battery: AW 36V 10AH Li-ion Rechargeable Battery Water Bottle Type w/Holder Charger For 36V 250W Electric Bicycle https://www.amazon.com/gp/product/B00XP531VW/ref=ppx_yo_dt_b_asin_image_o04_s00?ie=UTF8&psc=1

Product description

The Electric Bicycle Kit includes everything needed (except battery)

You'll be out cruising along at 34mph / 55km/h without a sweat!



Key feature:

* CE, EN15194 approved

* 48V 1500W and 750W super power brushless gearless hub motor

* Restricted to 750W and 38km/h by default as a road-legal kit

* Nylon tire & alloy rim & stainless steel spoke

* Rare-earth metal magnet are used in the motor to efficiently produce large power

* Aluminum alloy powerful controller guarantee big current supply

* Twist throttle has battery level display and power-cut off button

* Brake Levers cut off the power supply to the motor safely

* Crank speed sensor for pedal assist



Upgraded Intelligent Motor Controller:

* Allow you to swap two power modes between the full 1500W power or 750W power by a single blue switch wire is embedded in controller.



Notes:

1. Battery and charger are not included in package.

2. The system requires a 48 Volt electrokinetic cell battery with a nominal capacity not less than 14.5Ah.

3. The US regulations dictate that a kit must not exceed the rated power of 750W to be road-legal.



Specification:

Wheel type: Rear

Motor: Brushless gearless

Tire: Nylon

Rim: Alloy double wall

Spokes: Steel, 12G x 2.6mm

Wheel Size: 26 inch

Wheel Axle: Length 210mm x Dia 10mm

Max load capacity: 551 lb / 250kg

Net weight: 22lb / 10kg



Power Cord Length: 138cm

Mode 1 Power: 750W / 48V; Torque: 45 N.M; Max speed: 24mph / 38 km/h

Mode 2 Power: 1500W / 48V; Torque: 48 N.M; Max speed: 34mph / 55 km/h



Package Includes:

1x Brushless Gearless Motor Rear Wheel

1x Intelligent Motor Controller

1x Cable Ties & Plastic Coil

1x Wire Hub

1x Pair of Handle Bars (included Twist Throttle)

1x Pair of Brake Handles

1x yellow junction box

1x Manual

• 48V 1500W Powerful brushless gearless motor with 34mph (55km/h) speed; Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit.
• Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 551LB / 250KG Max Load Capacity.
• Brake Levers cut off the power supply to the motor safely; Twist throttle has battery level display
• Comes with all the components you need to a full conversion, including Rear Wheel(of 7 speed sprocket), Motor Controller, Cable Ties & Plastic Coil, Wire Hub, Twist Throttle, One Pair of Brake Handles, Manual. (Note: Battery not included)
• CE, EN15194 approved; 48 Volt electrokinetic cell battery with a nominal capacity not less than 14.5Ah is required.

User questions & answers

Question:	Will this work on a tandem bike
Answer:	I don't see why not. As long as the wheel is 26" and the chain sprocket is on the back tire.
Question:	so only connect one blue wire for the
Answer:	I never connect the two blue wires if you do it will only go I believe at most 20 mph and is then 750 watt . if you want more speed leave them disconnected and get a 52 to 60 volt battery if you do I suggest a DC circuit breaker and if you increase voltage you must decrease amps if not you will greatly reduce the lifespan of your motor and or controller good luck have fun and do some research. I destroyed my first ebike bike by using lead acid batteries 4x12 without a fuse/circuit breaker
Question:	Using only the throttle and not the pas system, does the wheel move without the 7 speed sproket moving
Answer:	I have the 26" Voilamart kit but I'm a little confused about your question. The 7 speed sprocket moves with the wheel but I can pedal backwards while the throttle is on.
Question:	Is it 1500w out of the box? If not, how do you set it to 1500, and 34? i heard you need to use a wire
Answer:	It is 1500watts right out of the box. There are 2 blue wires, they only connect to each other, and if you connect them, it reduces the power to 750w, I think I previously said 250w, but that was a mistake, it's 750. I'm not sure what you mean by 34.

Product description

The Electric Bicycle Kit Key feature:

* CE, EN15194 approved

* Restricted to 750W and 38km/h by default as a road-legal kit

* Nylon tire & alloy rim & stainless steel spoke

* Rare-earth metal magnet are used in the motor to efficiently produce large power

* Aluminum alloy powerful controller guarantee big current supply

* Twist throttle has battery level display and power-cut off button

* Brake Levers cut off the power supply to the motor safely

* Crank speed sensor for pedal assist



Upgraded Intelligent Motor Controller:

* Allow you to swap two power modes between the full 1000W power or 750W power by a single blue switch wire is embedded in controller. (Only for Twist Throttle)* Still remain the full 1000W power with no speed control.(Only for Pedal Assist System,"PAS")



Notes:

1. Battery and charger are not included in package.

2. The system requires a 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah.

3. The US regulations dictate that a kit must not exceed the rated power of 750W to be road-legal.



Caution: For your Safety, Please turn off the battery before connecting the Controller！



Specification:

Wheel type: Front

Motor: Brushless gearless

Tire: Nylon

Rim: Alloy double wall

Torque: 45 N.M

Spokes: Steel, 12G x 2.6mm

Wheel Size: 26 inch

Wheel Axle: Length 175mm x Dia 10mm

Max load capacity: 330-440lb / 150-200kg

Net weight: 22lb / 10kg

Power Cord Length: 95cm

Mode 1 Power: 750W / 48V; Max speed: 24mph / 38 km/h

Mode 2 Power: 1000W / 48V; Max speed: 28mph / 45 km/h



Package Includes:

1x Brushless Gearless Motor Front Wheel

1x Intelligent Motor Controller

1x Pedal Assist Crank Sensor

1x Cable Ties & Plastic Coil

1x Pair of Handle Bars (included Twist Throttle)

1x Controller Bag

1x Pair of Brake Handles

1x Manual

• 48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed; Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit.
• Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 330-440LB / 150-200KG Max Load Capacity.
• Brake Levers cut off the power supply to the motor safely; Twist throttle has battery level display
• Comes with all the components you need to a full conversion, including Front Wheel, Motor Controller, Controller Bag, Pedal Assist Crank Sensor, Cable Ties & Plastic Coil, Twist Throttle, One Pair of Brake Handles, Manual. (Note: Battery not included)
• CE, EN15194 approved; 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah is required.

User questions & answers

Question:	How wide is the tire
Answer:	This kit comes with a 2.0 tire pre-mounted and inflated by half.
Question:	Can I use lead acid batteries in this setup? Thanks
Answer:	I don’t see why not, as long as it meets your motors needs.
Question:	Can I install this in the rear instead of the front
Answer:	NO, you cannot. This is because you can not attach a sprocket/gears with which to hook up the chain to the pedal. That said, however, you "could" get away with doing so as long as you build your bike as a "scooter" - i.e., no pedals, no cycling. :) This means that you'll have to run it off the throttle ALL the time, thus requiring a battery with higher Amps *capacity" if you want to go farther/longer than. One other issue you will also need to double-check is the width of the hub to make sure it will span the wider rear drop-down gap. I bought this to build a bike for my sister's 6'3" boyfriend so I don't have it here to check for you. He was AMAZED by how powerful it is. I designed it with a 48V, 13.5Amp battery.
Question:	How many amps is the controller rated for
Answer:	Most controller units are rated at 20 amps. There are after market units that can be higher after fudging them but, why would you want to? 20 amps is the standard and higher amps brings you into the fire hazard zone...just be sure to put an in-line 20 amp fuse between the controller and your battery and you avoid burning stuff up. Available at NAPA.

Product description

Features:



- 20" Electric Bicycle Front Wheel (Not include tire & battery)

- Suitable Tire Size - 20" x 1.75" to 2.1" (a tire that is 20" in outer diameter and 1.75" to 2.1" in width)

- E-bike Conversion Kit - easy to convert your bike to an electric powered scooter/moped

- 750W powerful brushless gearless hub motor with 25 km/h top speed

- The brake shuts off motor automatically - saves energy and improves safety

- Aluminum rim for strong support & rust resistance

- Thumb throttle with 3 LED battery indicator lights

- If you need to buy a battery, please contact our representatives. Compatible Battery Model: 19LIB002



Specifications:



- Wheel Outer Diameter: 20" (50.8 cm)

- Hub Length: 6 7/8" (17.5 cm)

- Hub Spacing: 4" (10 cm)

- Rim Width: 1 9/16" (4 cm)

- Suitable Tire Size: 20" outer diameter & 1.75" to 2.1" in width

- Motor: 36V, 750W

- Net Weight: 18.3 lbs (8.3 kg)



Package Contents:



- 1x Replacement Front Wheel (Tire Not Included)

- 1x Motor

- 1x Electric Controller

- 2x Brake Pullers

- 1x Thumb Throttle

- 2x Grips

- 1x Carrying Bag

- 1x Rope (color will pick at random)

- 1 Set of Winding Pipes/Zip Ties

- 1x Manual



Notice:



- Must to wear a helmet before riding this electric bicycle for protection.

- Please note that Tire and Battery are NOT included in the package.

- Please go to those automobile repair shop with standard business license for modification.

- If you have any question about the compatible Model, please contact our Customer Service before purchasing.

• 20" Electric Bicycle Front Wheel; E-bike Conversion Kit - easy to convert your bike to an electric powered scooter/moped; Suitable Tire Size - 20" x 1.75" to 2.1" (a tire that is 20" in outer diameter and 1.75" to 2.1" in width)
• 36V 750W powerful brushless gearless hub motor with 25 km/h top speed
• The brake shuts off motor automatically - saves energy and improves safety
• Thumb throttle with 3 LED battery indicator lights; Aluminum rim for strong support & rust resistance
• Tire and Battery are NOT included. Wheel Outer Diameter: 20" (50.8 cm); Hub Length: 6 7/8" (17.5 cm); Hub Spacing: 4" (10 cm); Rim Width: 1 9/16" (4 cm)

User questions & answers

Question:	Can someone give me a breakdown of what I need to power this system
Answer:	hi friends, its cell is 18650. connection type 10S4P . they can be used for scooter , electric bike and electric motorcycle and so on.
Question:	What is the ideal battery for it? Size and brand
Answer:	yeah,of course
Question:	is it powerfull enough to pull an adult without pedaling
Answer:	The supplied charger is 'mains' voltage only, will not work with a car's 12V. And as already said, the bike does have regen capability, so will recharge when going down a hill at >15kpm (~10mph)
Question:	How many amps does the controller put out
Answer:	The bike itself weighs 68 pounds.

• Please ensure you select a specific variant from size and style. By default, the first variant of each option will be selected. Easily convert your bicycle to an ebike. Kits are ready to install with aluminum double-walled rim and hub motor already attached. All you need to do is to transfer the original tire.
• Kits include all necessary components for installation; Motor/Wheel, controller, LED display, throttle, brake levers, pedal assist system, torque arm, and cable ties. Battery and tire are not included.
• Upgrade to LCD Display. It offers battery percentage, speed, total and single trip distance, wattage, PAS levels, headlight switch, and potential error codes for easier troubleshooting.
• Continue to pedal: Pedal Assist Sensor (PAS) allows you to ride without throttle response. You may choose to operate your e-Bike either way. Going on a lengthy trip? Avoid uncomfortable wrist positions and simply pedal anytime, anywhere.
• We offer a 3 month warranty on all components included in the conversion kit. We provide technical support and hassle-free returns, full refund or replacements. We strive to ensure your satisfaction in our service and products.

User questions & answers

Question:	Can i use a 35ah battery with this? i see the controller is only 30a? or do i need to change controllers
Answer:	yes. voltage matters. i bought a 48 volt battery. amp hours (ah) is how long the battery lasts. more is better. though heavier.
Question:	Will this work for a schwinn adult trike with a rear basket
Answer:	i don,t think for the rear it should work for front wheel plus it will be lot easier to fix flat if you get a flat in the rear ok
Question:	Does the PAS sensor work when using front wheel drive
Answer:	yes
Question:	Is regenerative braking possible
Answer:	Not with this controller. The controller is what makes regen possible. You will not find regen on any of the cheap kits. On more exspensive kits with better controllers they offer regen. The motor as all direct drive hubs are capable of regen. But it is done with the controller.

Product features

YOU CAN CHANGE ALMOST ANY BIKE INTO AN ELECTRIC BIKE

Trying to figure out a new electric bike design setup that has enough power for your demands?

Ebikeling electric bike conversion kits are perfectly suited to your needs.

We provide a wide range of configurations offering freedom when building your setup.

Use almost any bicycle to start your setup today.

Switch your tire, make easy installments, and connect a few cables.

POWER YOUR BIKE

Choose your power supply

Customize the amount of power desired for your trips.

Get a higher top speed.

BUILD YOUR NEXT ADVENTURE!

Keep pedaling to maintain performance on long-distance rides thanks to Pedal Assistance System.

36V 500W 26" GEARED EBIKE CONVERSION KIT

EBIKELING Geared Brushless Electric Bicycle Conversion Kits come with a 500W hub motor and a 22 Amp controller.

Kits are ready to install with aluminum double walled rim and hub motor are already attached. All you need to do is to transfer original tire.

We have two throttle control options to choose from, twist or thumb. There are several other accessories included to complete this ebike kit such as pedal assist sensor, or a set of brake levers with safety cutoff switches.

36V 500W 700C GEARED EBIKE CONVERSION KIT

EBIKELING Geared Brushless Electric Bicycle Conversion Kits come with a 500W hub motor and a 22 Amp controller.

Kits are ready to install with aluminum double walled rim and hub motor are already attached. All you need to do is to transfer original tire.

We have two throttle control options to choose from, twist or thumb. There are several other accessories included to complete this ebike kit such as pedal assist sensor, or a set of brake levers with safety cutoff switches.

48V 1500W 26" DIRECT DRIVE REAR EBIKE CONVERSION KIT

EBIKELING Direct Drive Brushless Electric Bicycle Conversion Kits come with a 1500W hub motor and a 35 Amp controller.

Kits are ready to install with aluminum double walled rim and hub motor are already attached. All you need to do is to transfer original tire.

We have two throttle control options to choose from, twist or thumb. There are several other accessories included to complete this ebike kit such as pedal assist sensor, or a set of brake levers with safety cutoff switches.

48V 1200W 700C DIRECT DRIVE EBIKE CONVERSION KIT

EBIKELING Direct Drive Brushless Electric Bicycle Conversion Kits come with a 1200W hub motor and a 30 Amp controller.

Kits are ready to install with aluminum double walled rim and hub motor are already attached. All you need to do is to transfer original tire.

We have two throttle control options to choose from, twist or thumb. There are several other accessories included to complete this ebike kit such as pedal assist sensor, or a set of brake levers with safety cutoff switches.

Phone Holder Bag

Installed by three velcro fastening straps that provide a secure and reliable method to access apps without taking out your phone.

Saddle Bag

Durable, compact, and waterproof bag strapped under the seat to carry essential items at all times.

Mini Pump

Lightweight, portable, and super compact hand pump compatible with Schrader and Presta valves.

TFT 750C LCD Display

Bike computer mounted on the handlebar to monitor battery life, pedal-assist mode, mileage, and speedometer.

Extra Comfort

Thick high-density memory foam with dual anti-shock cushioning balls.

Durability

Premium artificial leather surface material ensures great abrasion-resistance.

Safety

Added eye-catching red warning strip for visibility riding at night or in rain.

Ventilation

Center cutout design offers anatomic relief by providing airflow and avoiding discomfort.

• 🚴‍♀️36V 500W super power brushless gearless hub motor, Restricted to 750W and 19.88mile/h by default as a road-legal kit
• 🚴‍♀️Crank speed sensor for pedal assist, Brake Levers cut off the power supply to the motor safely
• 🚴‍♀️Nylon tire& alloy rim& stainless steel spoke, Rare-earth metal magnates are used in the motor to efficiently produce large power
• 🚴‍♀️Aluminum alloy powerful controller guarantee big current supply
• 🚴‍♀️Twist throttle has battery level display and power-cut off button

User questions & answers

Question:	So if this hub has magnets, can it generate electricity from coasting / manual pedaling
Answer:	I think this depends on the controller, and the one that comes with this kit doesn't support that.
Question:	what type of connectors are on the battery control wires
Answer:	they were something cheap I Soldered nicer ones on.And if you don’t put the controller close to your battery you will have to make an extension wire.
Question:	I only do 12 mph on the average enjoying the view so I only need coaster brakes. So can this work without the brake levers
Answer:	I switched mine out for the ones that came with the kit because they also work as a kill switch as they are connected to the controller.
Question:	Why do you say it is limited to 19.88 mph yet in another place you say you get 23 mph? how do i by pass that so i can go even faster
Answer:	there is a limiter wire, the two single wires connect together to limit power to 20 mph for local laws. But it's also a factor of your battery power. 36v/10ah (360 watts) will max out at 20 (under 15 with the limiter connected). A higher amp hour battery will have more wattage available for the motor. disconnecting the wires will allow you unlimited power until you fry the motor from an oversized battery exceeding the input design limits. The power wires are not heavy gauge so they will only handle so much current before melting. A 36v/14ah battery will peak at 504 watts...that's probably how the other guy was hitting 30-36 mph.

Product features

JAXPETY 36V 500W E-Bike Front Wheel

This Electric Bicycle kit includes everything needed(except battery) to convert your standard bike into a top-of-the-line performance electric bike,which delivers unequaled performance and reliability.You will be out cruising along at 23.6mile/h without a sweat!

Provides you with a whole wheel with tire, not just the tire frame. Dual model controller guarantees you can ride your motorized bike even when the signal source is disabled.

Ungraded Intelligent Motor Controller:

For motor or controller issues your electric bicycle can fail to work properly. This single white switch wire will help you to determine the cause.

Sharing From Our Precious Customers

Product description

The Electric Bicycle Kit Key feature:

* 48V 1000W and 750W super power brushless gearless hub motor

* Nylon tire & alloy rim & stainless steel spoke

* Rare-earth metal magnet are used in the motor to efficiently produce large power

* Aluminum alloy powerful controller guarantee big current supply

* Adjustable 5 level intelligent pedal assist with twist throttle

* LCD display shows battery level and pedal assistance settings

* Brake Levers cut off the power supply to the motor safely

* Crank speed sensor for pedal assist



Upgraded Intelligent Motor Controller:

* Allow you to swap two power modes between the full 1000W power or 750W power by a single blue switch wire is embedded in controller. (Only for Twist Throttle)* Still remain the full 1000W power with no speed control.(Only for Pedal Assist System,"PAS")



Notes:

1. Battery and charger are not included in package.

2. The system requires a 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah.

3. Press the "M" button on the LCD Meter to start the system.

Caution: For your Safety, Please turn off the battery before connecting the Controller！



Specification:

Wheel type: Rear

Motor: Brushless gearless

Tire: Nylon

Rim: Alloy double wall

Torque: 45 N.M

Spokes: Steel, 12G x 2.6mm

Wheel Size: 26 inch

Wheel Axle: Length 210mm x Dia10mm

Max load capacity: 330-440lb / 150-200kg

Net weight: 22lb / 10kg



Mode 1 Power: 750W / 48V; Max speed: 24mph / 38 km/h

Mode 2 Power: 1000W / 48V; Max speed: 28mph / 45 km/h



Package Includes:

1x Brushless Gearless Motor Rear Wheel

1x Intelligent Motor Controller

1x Pedal Assist Crank Sensor

1x Cable Ties & Plastic Coil

1x Pair of Handle Bars (included Twist Throttle)

1x Controller Bag

1x Pair of Brake Handles

1x Manual

1x LCD Meter

• 48V 1000W Powerful brushless gearless motor with 28mph (45km/h) speed; Restricted to 750W and 24mph (38km/h) speed by default as a road-legal pedal bike conversion kit.
• Pedal Assistance System (PAS): enjoy cycling while driving electric bike with 330-440LB / 150-200KG Max Load Capacity.
• LCD display shows battery level and pedal assistance settings; Brake Levers cut off the power supply to the motor safely; Twist throttle has battery level display
• Comes with all the components you need to a full conversion, including Rear Wheel(of 7 speed sprocket), Motor Controller, Controller Bag, Pedal Assist Crank Sensor, Cable Ties & Plastic Coil, Twist Throttle, One Pair of Brake Handles, Manual, LCD Meter. (Note: Battery not included)
• CE approved; 48 Volt electrokinetic cell battery with a nominal capacity not less than 11.6Ah is required.

User questions & answers

Question:	what is the rpm of the hub motor
Answer:	Hello Jeremy, the Voilamart 26" has a "direct-drive" motor so the motor turns at the same rpm as the wheel. There are no gears in this wheel to reduce a high rpm motor down to the rpm of the wheel. The "direct-drive" hub is quieter, more efficient, and there are no gears to wear out. the trade-off is that the direct-drive hub is a bit larger and heavier than the gear reduction type hub.
Question:	can you use a 48v 20ah 30a?? battery the 30 amp concerns me because the controller max is 26a +1. thx
Answer:	Yes. Thats what I have and works great
Question:	Can I put my 26 195 tire on this rim
Answer:	Yes you can with no problem
Question:	How do you change from 1000w to 750w
Answer:	Plug the two blue wires together. Leave them disconnected for 1000w

Product description

Notice:

Battery and Charger are Not Included.

Battery Recommendation: Electro kinetic cell battery featured in nominal voltage 48v, nominal capacity 17-20Ah is compatible with the motor.

Must to wear a helmet before riding this electric bicycle for protection.

Please go to those automobile repair shop with standard business license for modification.

If you have any question about the compatible Model, please contact our Customer Service before purchasing.

Specification:

Overall Dimension: 25 13/16" x 1 9/16" (65.5 x 4 cm)

Axle Length: 7 11/16" (19.5 cm)

Rear Dropout Spacing: 5 5/16" (13.5 cm)

Spokes Length: 6 5/16" (16 cm)

Controller Size: 8 1/4" x 3 3/8" x 1 3/4" (21 x 8.5 x 4.5 cm)

The Number of Spokes: 36

Controller Power: 1000W

Motor Power: 1000W

Motor Voltage: 48V

Motor Rotating Speed: 470 RPM

Motor Torque: 40 to 45 N.m

High Motor Efficiency: more than 85%

Net weight: 24.71 Lbs (11.21 kg)

Package Content:

1x 26" Rear Wheel with Brushless Hub Motor

1x Battery Connection Cable

1x Electric Controller

2x Hand Brakes

2x Handle Grips

1x Thumb Throttle

1x Controller Bag

1x Set of Winding Pipe and Cable Tie

2x Terminal Boxes

1x Manual

• 1000W 48V 26" Electric Bicycle Rear Hub Conversion Kit, fit for 5 5/16" rear dropout spacing, with a speed of 31 mile/h (50 km/h), make your bicycle an electric power moped, brushless hub motor for noiseless running, to fully enjoy the pleasure of riding.
• Dual Mode Controller - Motor works under Hall effect and non-Hall effect, extend life for electric bicycle (If the components break down, controller will switch into non-hall effect mode, the motor will still be working ).
• Durable Frame - Aluminum alloy frame for durability and stability.
• Convenient to Use - Thumb throttle with battery monitor makes speed control as a breeze.
• Hand brakes shut off the motor automatically to save energy and improve safety. Environmental Protection - Powered by battery, without carbon dioxide emissions.

User questions & answers

Question:	Do you have to buy a separate battery to get the bike to work?How do you connect the yellow and red wires labeled in the Battery section
Answer:	The wires are color coded so just place red to red. You don't need four batteries. One 1000w battery pack will work. It must be a 1000w battery.
Question:	How wide does the rear triangle need to be to fit the hub? I have a narrow single-speed bike and am worried from reviews it won't fit
Answer:	Great Question! The quick answer is the rear triangle needs to be much wider than a single speed. I have installed this kit on 2 different multi-speed bikes and had to widen the triangle on each one. I don't have specific measurements to give you but you will need to cold form the triangle to fit the hub. It is not hard to do if you are handy with tools. Other questions you need to ask are... Brakes. If you have a single speed with a coaster brake, Forget it. You will need to get a caliper type break kit (and a good one at that). Second is you are going to have a multi gear rear wheel with no derailier. Adjusting the chain so it stays on is going to be difficult at best. you could swap out the multi gear freewheel for a single speed but that will open up more problems and not solve the braking problem.My quick advice to you if you want to build one of these is to find a different bike. you will probably have to modify that as well but not as drastically. These things are a blast but you want to make sure you have a safe and solid set up.I hope this helps. Feel free to contact me with any questions.
Question:	Can anybody recommend batteries for this
Answer:	Buy the best battery that you can afford. I also recommend that you go with the Lithium battery option and buy the largest Amp Hour (ah) rating that you can afford. The higher the ah the longer the range. You can find many options on Ebay but beware and carefully read about what exactly you are buying and where it comes from. After a lot of research I purchased my 48v (52v at full capacity) 20 ah battery pack from calibike.com as well. He met all the criteria that I was looking for including... Excellent price. The price included a top quality charger. Excellent built quality including the Battery Management System (BMS). He is located in the USA. I received my battery in less than a week. If you buy from over seas / China it can take a month or more to receive your order. I spoke to Calibike extensively via email and by phone before making my purchase. The owner was very happy to answer any and all my questions and was very prompt with replying. Take note of his recommendation on what size and type of fuse to get (the fuse set up with the kit is rubbish and you will soon be replacing it).That said, Also consider and plan for how you will carry/ attach the battery pack and ESC to your bike. The bag that comes with the kit is of poor quality and does not attach very securely nor will it last very long. As you are no doubt finding out the batteries cost more than the kit itself. Protect your investment.
Question:	Does it comes with battery
Answer:	no

• 🚴Rear wheel: 48V 1000W and 750W super power brushless gearless hub motor. It is the rear wheel, couldn't be used on the front.
• 🚴Restricted to 750W and 19.88mile/h by default as a road-legal kit.
• 🚴Nylon tire& alloy rim& stainless steel spoke, Rare-earth metal magnates are used in the motor to efficiently produce large power.
• 🚴Aluminum alloy powerful controller guarantee big current supply.
• 🚴Twist throttle has battery level display and power-cut off button.

User questions & answers

Question:	Will this battery work ebike li-ion battery 48v20ah 1000w scooter electric bicycle motor bms charger us
Answer:	If it's a 48v battery, then yes.
Question:	What kind of Battery do you need for this
Answer:	Ideally 48-52v 20ah thats 30mph for 20miles no peddle and alil juice left over
Question:	my front wheel is 28 x 1.75 will this work
Answer:	No you have a 28” rim and this is a 26” rim.
Question:	What’s the top speed at 1000w setup? Looking at a 48v 20ah battery so I’m lookinh for top speed with a 25+ mile range
Answer:	I have that setup 48V 20AH and my top speed is 30 mph. I have not done a range test, but will try to update later with range info too.

Product features

JAXPETY48V 1000W E-Bike Rear Wheel

This Electric Bicycle kit includes everything needed(except battery) to convert your standard bike into a top-of-the-line performance electric bike, which delivers unequaled performance and reliability. You will be out cruising along at 28mile/h without a sweat!

Note: 1.Our product is compatible with many kinds of battery. The system requires a 48 Volt electrokinetic cell battery (Li, lead-acid, NiMH battery etc.) with a nominal capacity not less than 12Ah. 2.Battery and charger are not included in package. 3.The US regulations dictate that a kit must not exceed the rated power of 750W to be road-legal.

• Package Includes:
• 1x 48V 1000W Motor
• 1x 26" Front Wheel / Rear Wheel
• 1x 48V Controller
• 2x Hand Brakes
• 1x Twist Throttle
• 1x Battery Power Indicator
• 2x Handle Grips
• 1x Harness
• 1x Battery Carrying Bag
• 1x User Manual

Sharing From Our Precious Customers

Product description

Purchase Note:

Fit for the Bike Bottom Bracket 68 - 73mm.

The Inner Diamater of the bracket not less than 33.5mm.

8 pcs gaskets in the parcel help to fit Bottom Bracket 73mm.



Motor Specification:

Watts: 750W Volts: 48V

Controller Current: 25A

No Load Speed(RPM) : 140-160

Load Speed(RPM): 120-135

MAX Torque: 160 N.m

Efficiency > 85%

PAS: Speed Sensor

Reduction Ratio: 1: 21.9

Centification: CE/EN 14764/ROHS

Waterproof Grade: IP65

Net Motor Weight: 4.24kg

Motor Kits Weight: 5.6-6.0kg

Bracket bottom length: 68mm- 73mm

Motor Operation Temperature: -20℃-45℃

Max speed: 52km/h ( 75Kg Load, 44T, Different work condition different speed)

Speed within 25-30km/h can help you ride farther.



48V 12Ah/14.5Ah/17.5Ah Hailong Battery Specifications:

Battery Cell: Samsung 29ET 2900mah 52PCS/Samsung 29ET

2900mah 65PCS/Samsung 35ET 3500mah 65PCS

Array mode:13s4p/13s4p/13s5p

Battery size:367.2*90.1*111mm

Battery Weight:4.1KG/4.4KG/4.4KG

Max Constant Discharge Current:30A

Current Limits: 25Ah/25Ah/30Ah

Fit for: Bafang 48V 500W 750W 1000W Hub Motor and Mid motor

Charge voltage: 54.6V

Discharge cut off voltage: 36.4V

Way of Charge: CC/CV

Cycle Life: 2000 times

Charge/Discharge Temperature: -15-65℃

Protection Function: Over charge, Over discharge, Over current, Short circuit, Balance.



Packing list:

BBS02B 48V 750W Mid Drive Motor * 1 pcs

Speed Detecting Sensor + Magnet * 1 set

Chain Wheel: 44T 46T 48T 52T (optional)

Display * 1 DPC18 750C 8520C P850C C965 C961 SW102 500C

750C​Bluetooth( works on IOS 9.3.5+ systems on iPhone)

Brake Lever * 1 Pair ( change to Hydraulic Brake Sensor freely)

Thumb Throttle * 1 pcs

Installation Screws and Nuts * 1 set

1T4 Cable *1 pcs

Crank* 1 pair

Gifts: A headlight Wrench + Removal Tool + XT60 cable 1 set

Gaskets * 8 Pcs For Bottom Bracket 73mm.

• [Easy Installation]: The Bafang 750W Mid-drive conversion kit can be installed on a standard bike frame easily.
• [Powerful]: High starting torque, Max torque≥160Nm, good performance on climbing.
• [Safety]: Double clutch is used on the drive unit, more safety. Speed sensor and torque sensor can be applied, controller integrated.
• [All Included]: It comes with everything that you need to convert your electric bicycle and ready to enjoy the freedom of climbing up hills without any problem. NOTICE: brake lever (IN default, Fulfilled by Amazon are all packed with the brake levers, can't change to brake sensors). If you want the brake sensor for hydraulic brake, send an email to change, shipped by the seller.
• [Service Available]: Shipped by DHL. Usually arrives in 3-7 days. With 1 year Service for the mid-drive motor, no worry about using it.

User questions & answers

Question:	Does this kit include a battery
Answer:	It does not include the battery
Question:	Does 48v 10Ah battery work with the 750w bafang motor
Answer:	I’m not sure about the 10ah but I have the 48 volt 13ah which seems to be a good match for my bike
Question:	Can this work with 52v battery
Answer:	I have a 52v battery on my 48v bafang, all you have to do is add it to your display on your bike computer.
Question:	Does this unit disengage for normal bike peddling when battery is discharged/off
Answer:	Yes, it disengages.

Product description

Specification:

Condition: 100% brand new

Item type: E‑Bike Rear Wheel Motor Conversion Set

Material: Synthetic Rubber

Color: As picture shown

Weight: Approx. 13500g 

Motor: 48V1000W permanent magnet motor

Controller: 12 tubes high power

Tower wheel: flywheel

Meter: LCD meter

Tires: quality Tires

Package List:

1 x Tyre1 x Beam bag1 x Motor1 x Sensor1 x Controller2 x Brake1 x Throttle Grip1 x Handlebar cover1 x Throttle Grip Handlebar cover1 x Pad belt1 x Wiring board(base)1 x Wiring board (cover)1 x Instruction

• 【Include All You Need】The electric bike kit contains everything needed for bike performance, Professional manufacturing, stable performance and high reliability.
• 【Widely Applications】Working together with a cassette or freewheel speed change mechanism, greatly enhances riding comfort and is suitable for touring bikes, commuter bikes and mountain bikes.
• 【Powerful Motor】Powerful 1000W 48V electric bike rear wheel motor, providing unparalleled performance and reliability.
• 【Fit 26 inch Wheels】Can convert any bicycle with 26‑inch wheels. Easily convert bicycles into electric bicycle.
• 【Buying with Confidence】Shipment start from US local warehouse, delivery usually takes 3 - 8days. and our professional customer service team available in 24h.

User questions & answers

Question:	Is it the battery included
Answer:	The battery is not included.