12 best racor bike racks

Product description

The Racor Gravity Bike Rack conveniently holds two bikes and up to 100lbs. The Gravity Bike Rack is freestanding and easy to assemble, so you can safely and securely store two bikes along the wall and immediately start saving space in the garage or in your home. At just 20lbs, the Gravity Bike Rack can be easily moved and repositioned. Independent adjustable arms accommodate men's and women's road and mountain bikes and keep them level. The skid free rubber guards make it sturdy enough to ensure the safety and stability of your bikes.

Some assembly required. Order yours today, and reclaim your garage!

• Customizable - Gravity rack leans against any walll, lightweight and movable
• Durable - Vinyl coated steel and rubber skids protects bikes, floors and walls
• Adjustable - Independent adjustable holding arms will work with men's and women's bikes
• Convenient - Bikes are organized but easily accessible
• Reclaim Your Garage - Reduce your bike's footprint in your garage, but keep them easily accessible

User questions & answers

Question:	How big of screw does this use? Will it make large holes in my wall? We need to find something that can be used inside our condo
Answer:	I am using this stand without any screws. I just lean it to the wall, and that's it. Very convenient, no drilling needed.
Question:	A women's bike does not have a straight rod from the seat to the handle. How will such a bike be hung
Answer:	First, plan to place the women's bike on the bottom. Second, place the brackets at two different levels on the side of the main bar. Third, twist the curved cup / bar holders to accommodate the slanted bike rod.
Question:	can you service your bikes while they are sitting on the stand? is there enough room to rotate pedals and use all moving parts freely
Answer:	My rack is anchored to the wall. I have two large bikes, that means the top one is high and the bottom one has wheels just touching the ground. The pedals on the top one are about eye-level and everything rotates freely. If you put one mid-height you can service it.
Question:	How does the 4 bike rack attach to the wall? I see how the 2 bike rack could bolt in easily but with 4 bikes it will be away from the wall
Answer:	The 4 bike rack does not mount to the wall. It has a round base and stands freely wherever you decide to put it. It has great balance and does not wobble. The cool thing about the 4 bike rack is that you don't have to have all 4 arm sets attached. I currently have only 2 arm sets attached. It is very versitle.

Product features

Racor Gravity Bike Rack

The Racor Gravity Bike Rack conveniently holds two bikes and up to 100lbs. The Gravity Bike Rack is freestanding and easy to assemble, so you can safely and securely store two bikes along the wall and immediately start saving space in the garage or in your home. At just 20lbs, the Gravity Bike Rack can be easily moved and repositioned. Independent adjustable arms accommodate men's and women's road and mountain bikes and keep them level.

Product description

Racor - B-1R - Solo Vertical Bike Rack - Wall Mounted

Hang and store one bike vertically with this wall-mount bike rack from Racor. Molded rubber hook guards protect the rim from scratching and gouging. The rack is equipped with an exclusive security loop that accepts cable locks for optimal theft-deterrence indoors and out. Solid steel construction means optimal durability and support. And, an epoxy finish ensures corrosion resistance for years of rust-free storage. With no assembly required; the rack mounts easily with the provided hardware. --Brian D. Olson

• Wheel Safe - Hook and plate design is safe for road & mountain bike tires
• Durable - High strength epoxy coated steel allows you to lift up to 50 lbs
• Practical - Keep bikes tidy and reclaim valuable floor and shelf space
• Customizable - Mountable on any studded wall to maximize organization
• Safe- Security loop for theft prevention

User questions & answers

Question:	anyone with road wheels concerned about weight of the bike damaging the wheel
Answer:	I have three of these racks, all of them supporting heavy "beach cuisers" in vertical positions. I would suggest mounting the rack at a height that allows the bike to rest on the rear tire, thereby taking some of the weight off the rack. This has kept a lot of stress off the rack(wall) as well as the front wheel. I've not had any visible damage to any of my front wheels.
Question:	Does this system put a lot of weight (the whole bike) on the rim of the front wheel? Does it not bend the rim after awhile
Answer:	The weight it puts on the wheel in this position is nowhere near the amount of force that's applied when you sit on it. Remember that spokes are designed to take hanging force, not rigid vertical force from the bottom. So hanging on the spokes like this is exactly what they are designed to do.
Question:	If I am hanging multiple racks side by side, alternating higher and lower, how much clearance between the racks do I need to leave
Answer:	I was limited for space on my 60" wall, so I hung four brackets 12" apart and like you're planning, alternated them between high and low. I own four 26" Specialized mountain bikes with standard length handlebars. To make them fit, I inverted (faced downwards) the lower bracketed bikes and kept the upper bracketed bikes facing upwards. The clearance between the handlebars is 1-2". The reason I hang it that way is so I can take any bike out without having it interfere with the others. Hope this helps.
Question:	Is the bike rigidly perpendicular to the wall or does the bike to swing from side to side when hanging on this rack
Answer:	It won't necessarily swing on its own but no, it does not lock rigidly into position. That said, even if you were to bump into the bike while it was hanging there, it would fall off the hook.

Product features

Racor Single Bike Rack

With the Racor Single Bike Rack, you can conveniently store one bicycle vertically on the wall and save some much needed floor space. The Single Bike Rack features molded rubber hook guards that secure your bike tire or rim to the wall without scratching your bike. And to prevent theft, the Single Bike Rack has an exclusive security loop that can be used with a cable lock. Made from epoxy-coated, laser-cut, 12-gauge steel, this bike rack is built to last for years of quality storage.

Product description

The Racor Bike Lift is the perfect way to store your bicycle overhead and free up extra garage space. The Bike Lift uses a rope and pulley system that is mounted to your ceiling. Raise and lower a 50lb bike up to 12 feet by simply latching the hooks to the seat and handlebars and pulling the rope. When you’re ready to ride, unlock the rope and lower your bike… no ladders needed! Bikes are the number one bulky storage problem for consumers, but the Bike Lift pulleys do most of the work–making a 50lb bike feel like it’s only about 12 pounds: a 4:1 mechanical advantage. A unique locking mechanism holds the rope securely in place to prevent accidental release. Some assembly required; installs into ceiling joists. Order yours today, and reclaim your garage!

The RacorPro PBH-1R Ceiling-Mounted Bike Lift allows you to take advantage of unused ceiling space to store your bike. Installation takes only a matter of minutes, and with its ingenious pulley system, raising and lowering your bike couldn't be easier. The lift lets you free up precious storage space on the floor, all while keeping your bike stored away safely until you're ready to ride.

• Easy Lifting - Pulley system reduces weight by 8 times
• Safe - Pulley locking mechanism keeps bike secure until released
• Cord Storage - Wall mounted cord wrap keeps cords tidy
• Adjustable - For use on ceilings up to 12 feet high
• Reclaim Your Garage - Each lift can free 6-8 ft of floor space keeping your options and workspace open

User questions & answers

Question:	Is it possible to get a replacement rope? My lift is older. The rope is wearing, and the lift is getting stuck when I try to lower my bike
Answer:	We have three of these lifts for our various tandem bikes, which are quite a bit heavier than a typical single bike. We were unsure whether the supplied lightweight rope would be up to the task, so we replaced it from the outset with 8mm climbing rope from an outdoor-gear store. After several years of regular use, the climbing rope shows no signs of wear or stretching.
Question:	Will this hold a bike horizontally at the ceiling
Answer:	Yes, as long as it is mounted into the studs, it will hold the bike horizontally at the ceiling. This unit has to be mounted into the studs.
Question:	is the pull up & pull down movement smooth & even? or kinda jerky as you let out the rope (or pull it up). thanks
Answer:	The pull up is smooth. However on the pull down you actually have to pull the bike or whatever you are keeping on the mount down while at the same time giving the cord some slack making a vertical line so the lock won't activate. So it si not jerky but not so smooth.
Question:	We have these bike lifts and are taking them to a different house. Can anyone tell us how far apart do you mount the 2 brackets
Answer:	Hello. If you measure the distance between your handle bars and the back of the saddle or seat, that will be the distance to the center of each bracket as you want to be able to lower your bike straight down.

Product features

Racor Bike Lift

The Racor Bike Lift is the perfect way to store your bicycle overhead and free up extra garage space. The Bike Lift uses a rope and pulley system that is mounted to your ceiling. Raise and lower a 50lb bike up to 12 feet by simply latching the hooks to the seat and handlebars and pulling the rope. When you’re ready to ride, unlock the rope and lower your bike… no ladders needed! A unique locking mechanism holds the rope securely in place to prevent accidental release.

Product description

Store bikes flat against the wall for maximum use of space with this folding bike rack from Racor. Two arms support the frame of the bike upright for reliable storage and easy access. When out of use, the rack folds flat against the wall so no one can bump into it. A handy shelf is a great place to set helmets or bike shoes, and doubles as a light-duty mechanics workstation. Easy for kids to use, the stand is made of sturdy solid steel construction and a durable epoxy finish for optimal durability and corrosion resistance. No assembly required, the stand mounts easily to walls with the included hardware. --Brian D. Olson

• Wall-mount folding bike rack; supports one bike
• Folds flat when not in use
• Handy shelf for helmet and accessories
• Easy installation with provided hardware
• Solid steel construction and a durable epoxy finish

User questions & answers

Question:	How much weight is it rated for
Answer:	Do not know the exact weight but I have a men's and woman's Trek 300 all terrain bikes on it. I'll admit it's a little wobbly but hold the bikes securely.
Question:	when secured to a stud, what is the max weight this should be able to hold? It should hold two bikes right
Answer:	Mine holds two bikes. It states they should be 50lbs max each. So the rack will hold 100lbs. Did the rack buckle, or did the screws give?
Question:	What is the depth of the double (inches from the wall to end of rack)? Item dimensions 21 x 13 x 14 but not sure which is depth
Answer:	Product depth 13in, product height 21 in and product width 12.513 is the depth and please be aware this bike rack is used
Question:	What is the width that the hooks end up at? I need 14 inches to align with the hooks so front handle bars do not turn the front tire
Answer:	The forks of the rack are 12 inches long. My handle bars do not touch the garage wall. You could add a 2X4 between the wall and the rack to add clearance paint the color of the wall or rack and no one will notice

Product description

With the Racor Floor Bike Stand you can safely and securely store two bikes on the floor so they won’t tip over and scratch your car or harm other belongings. The Racor Floor Bike Stand is designed so it can be assembled to hold bikes in the same direction or alternate directions, depending on your space. Resin feet protect your floor and keep the stand in place. The Floor Bike Stand firmly cradles your bike’s tires–holding the tire in the front, underneath, and on the side–to keep it from falling over. Some assembly required; no installation is needed. Order yours today, and reclaim your garage!

• Customizable - Assemble racking to store bike in same or opposite directions
• Stable - Resin feet keep the stand in place and protect your floor
• Durable - Epoxy coated steel base and support arms for long-term use
• Easy Assembly - All hardware included, easily assembled with no other installation needed
• Reclaim Your Garage - Helps organize bikes and holds them securely in place to avoid tipping or damage

User questions & answers

Question:	will this rack fit a 26" beach cruiser
Answer:	Yes it will. Depending on thickness of tires it may fit tight
Question:	Will this rack hold two 29er's? Thanks
Answer:	Yes. I have two twenty 29ers with 2.35 tires. No problem.
Question:	the purchase options show "1 bike stand" and "2 bike stands". Does the 1 bike stand hold two bikes like the picture shows
Answer:	Yes, 1 stand holds 2 bikes. I have 2 Trek Hybrids and it does just fine. Only thing is you'll need to put one with the front tire and the second one with the rear.
Question:	Does it work for bikes with disc brakes
Answer:	It will work with 26" wheels with disk brakes. Use a piece or white PVC irrigation tubing and zip tie. Cut the tubing to fit across the wheel hole and zip tie at a appropriate level to fit any wheel. Total cost $0 since i had some scrap tubing.

Product features

Racor Floor Bike Stand

With the Racor Floor Bike Stand you can safely and securely store two bikes on the floor so they won’t tip over and scratch your car or harm other belongings. The Racor Floor Bike Stand is designed so it can be assembled to hold bikes in the same direction or alternate directions, depending on your space. The Floor Bike Stand firmly cradles your bike’s tires–holding the tire in the front, underneath, and on the side–to keep it from falling over.

Product description

Racor Prostor 10 in. H x 5 in. W x 3-1/2 in. L Epoxy Bike Lift

• 50 lb. Capacity

User questions & answers

Question:	okay may sound stupid, but since the rope is continuous, how do you keep the bike level as you are raising it - or do you
Answer:	The Proslat Tire Storage Rack is made in China.
Question:	I want to put these in the drywall of the ceiling in my apartment. Will it hold
Answer:	I have a Radrover 4" fat tire electric MTB and it about 70lbs with accessories, rack, rack bag, and battery. Zero issues with this rack holding the ebike.
Question:	Are the actual pulleys plastic or metal? I am willing to pay more for a unit that has metal pulleys that won't crack over time and welcome any sugges
Answer:	Don't think there is a solution for fat tire with fenders. The Fender Rack might be a solution, but the maximum tire width is 2.25" The Fat Rack is for bikes without fenders, and tire width can be 2.25" to 5" The Classic is also for bikes without fenders, but max tire width is 2.25" Hope this helps, Sharon
Question:	Can I use this with a cathedral ceiling? Can I mount it on an angle and just have the rope longer on the end that is higher on the ceiling
Answer:	Steady rack manufactures a rack made for bikes with fenders. It is designed different than the rack for bikes without fenders. Their website shows the difference.

Product description

Store men or women bikes flat against the wall for maximum use of space. When the bike rack isn't being used, it folds up out of the way. Made of sturdy solid steel construction and a durable epoxy finish. It has a lifetime . No assembly required. Easy wall installation with provided hardware. Dimensions: 12" W. x 6" H. x 12" D. Color: Black.

• Store men or women bikes flat against the wall for maximum use of space

Product description

Racor 3 in. H x 14 in. W x 3 in. L Epoxy Single Folding Bike Rack

• Original Design: Leans against wall & holds bike using gravity
• Versatile: Elegant design looks good in any room or garage
• Construction: Industrial-grade powdercoated steel & custom molded arm covers
• Dimensions: 86" x 23.5" x 13.75" / 2184 x 597 x 350 mm
• Fully Adjustable: Independent arms accommodate any bike style
• Quick Assembly: Easy to assemble with regular screwdriver
• Max Weight: 100 lb / 45 kg

User questions & answers

Question:	How far does the stand come from the wall
Answer:	Not far. The top bar has a flat hunk of plastic (an inch or so thick) that must make direct contact with the wall. The legs curve forward a bit, and they probably sit about a foot from the wall, I reckon.
Question:	Will this work on carpet as well
Answer:	I have mine on carpet and it works great.
Question:	We have a shed with an inside side height of 72". Any way this will fit
Answer:	Cut a hole in the roof of your shed.
Question:	Will this work with two bikes with women's frames? The photo shows men's frames - which have the straight bar across instead of the angle
Answer:	Might help to get a horizontal adapter bar for women’s frames. They are used for trailer hitch bike racks. Typically run about $10-$20.

Product features

delta Cycle & Home

STEP 1

Installs in minutes. No drilling required. Our ground-breaking design leans securely against any wall with no permanent attachment.

STEP 2

Our rubber coated protective arms can infinitely adjust vertically and horizontally to fit any bike, including kids and womens bikes.

STEP 3

Once adjusted, storing and removing your bike is a breeze. Elegantly designed to suit homes, apartments, condos or your garage.

• 98% iron
• Imported
• Material: strong steel;load capacity: 60 lb;size:10.2 inch*3.2 inch;color: black.
• Space Saver: Bicycle wall mount hanger for hanging the bike vertically to save space.
• Better Protection: Sponge cover on the hook, protect the wheel from scratching. Safety engineered locking mechanism prevents accidental release.
• Practical: Our bike stand suitable for all type bikes like mountain bikes, road bikes, folding bikes etc. Can hold up to 66 lbs of a bike, but it all depends on how strong the wall is.
• Heavy Duty: The bike hanger for garage it's maximum hanging weight up to 66lb and greater clearance from wall to bike to fit a wider variety of bicycles.

User questions & answers

Question:	Would this item work for a recumbent trike
Answer:	Yes. The hook holds your bike vertically by holding on to the front tire.
Question:	Could you fit a bike lock through the raised side bit of metal to lock a bike to this
Answer:	That portion is right next to the tire so there isn't a lot of room. You might be able to fit a thin cable lock if it's a mountain bike. A u-type lock might fit on a street bike, but it would be tight.
Question:	What size hole do i have to drill for the screws
Answer:	Sorry I don't know I just looked at the screw and held up a drill bit that was about equal and drilled.
Question:	What size wall anchors are included
Answer:	Hello, the wall screw aiming point is 6MM

Product features

Heavy Duty

• Material: Strong Steel;
• Load Capacity: 66 lbs;
• Size:10.2 inch*3.1 inch;Color: Black
• Package gross weight: 1.32 LBS for 1 pack/2.64 LBS for 2 pack

Package Includes：

Set of screws

Set of bike hanger

Good design for hanging bikes

• Bicycle Wall Mount Hanger For Hanging The Bike Vertically To Save Space
• Sponge Cover On The Hook,Protect The Wheel From Scratching.Safety Engineered Locking Mechanism Prevents Accidental Release

Installation Notes

• It is very easy to install according to the instructions, including packing screws.
• As long as you have an electric drill at home, you can easily complete the installation.
• Tip: The wall where the hook is installed must be strong. Can not install foam, steel plate, plastic and soft walls, it is very easy to fall and it is dangerous.

• MEDIUM BIKE RACK: Comfortably store 4 adult bikes in 4 feet and up to 200lbs.
• UPDATED HOOK DESIGN: Hooks safely adjust side to side but never disconnect from the bar.
• COUNTOURED BIKE HOOKS: Rubber coated bike hangers are redesigned to reduce torque placed on rims and spokes.
• ADJUSTABLE BIKE HOOKS: Rubber coated bike hangers slide easily across the bar for easy garage bike storage.
• EASY INSTALLATION: Basic tools needed for a basic installation in 15 minutes. Durable hardware included.

User questions & answers

Question:	Would it be possible to put screws into the hooks so that they were permantly mounted and fixed in place on the bar
Answer:	Yes, in fact we found it was the only way we could easily take off and mount the bikes, as otherwise the hooks tend to slide along the rack
Question:	Does it work for road bikes as well
Answer:	This works excellent . Make sure and mount it to studs in your wall.I have had one for a year now and have no issues at all. It keeps all our bikes neatly hanging in the garage.
Question:	Can you tell me what height off the floor is best for a standard-sized bike? Do the hooks bind the spokes and damange them
Answer:	The bike's top wheel extends a couple of inches above the bar, so the height really depends on how long your bike is and if you want some space below the bikes. I hung it at about 7', so I have some space below. As to the spokes, I didn't notice any damage on the spokes so far, but the rubber coating on a couple hooks has been torn, so I had create a DIY padding.
Question:	If I want to get a bike in the middle, do I have to remove the other bikes to the left or right of it before accessing
Answer:	No, you can remove a bike from the middle without removing the other bikes.

Product features

Rubber Coated Hooks

The rubber coating protects your items as well as increases the grip of the hook.

Powder Coated Protection

All hooks, bars, and brackets are powder coated for a tough exterior that looks great.

Industrial Grade Steel

All of our kits are made with steel to provide you with strength you can count on.

Product description

"

This pro-quality, versatile stand has a rock-solid base. When deciding on which product to carry we analyzed many factors, cost, stability, quality, etc.. After talking to multiple riders, repairmen, and bike distributors, we elected to go with the slightly more expensive, but more robust, Stand. The rigid design allows a secure base for awkward cycles and offers extreme portability. In our opinion these are much more robust and versatile than the inferior knock off versions you regularly see on the market.

Features:

• Easy to Install
• Must be secured to the wall with anchor wood screw, included.
• Adjustment arms for level bike storage.
• Holds up to 125 lbs.
• Simple to use.
• Weight 20 lbs.
• 79 by 26 by 19 inches
• 1-year warranty

"

• ►EASY ASSEMBLY - Don't let the heavy duty construction fool you, this bike rack is easy to assemble.
• ►VERSATILE - Adjustment arms allow adjustment for level and stable storage of any bike you want to hang on it. Must be secured to wall with 4" anchor screw included.
• ►HEAVY DUTY - Holds up to 125 lbs. Weight 20 lbs. and is 79 inches by 26 inches by 19 inches in size. This is the rack that the others have tried to imitate.
• ►EASY TO USE - No complicated pulleys or mounting brackets, just secure it to a wall stud and place your bikes on it, let gravity do the rest.
• ►ROCK SOLID BASE - The rigid design allows a secure base for awkward cycles and offers extreme portability.

User questions & answers

Question:	How snug do the arms fit in the bolt holes? Is there any play
Answer:	I bought this years ago. Removed 1 holder and turned the remaining holder vertically and moved it higher up. Was then able to hang the bike vertically. Its works like new with no problem what so ever. Check with the manufacturer if this current model still allows for that. From the photo, I am guessing it will.
Question:	how would you mount a girls bike on this stand
Answer:	Very easy. May be more difficult for someone short trying to hang up a heavy bike.
Question:	Does it have a vinyl coating? It is advertised on the box but not sure it will be true
Answer:	Absolutely - This rack will also accommodate mountain bikes. The horizontal loading bar is over-sized to fit fat tire rims but it will easily hold a mountain bike rim as well.
Question:	Will the bike on the top be taller than the top of the rack? My ceilings are only about 83 inches high in my basement where id like to install this
Answer:	The anchors that came with it would only hold about 20lbs. I bought some different anchors to hold more weight.

Product features

RAD Cycle Gravity Bike Stand Bicycle Rack Storage or Display Holds Two Bicycles

This pro-quality, versatile stand has a rock-solid base. When deciding on which product to carry we analyzed many factors, cost, stability, quality, etc.. After talking to multiple riders, repairmen, and bike distributors, we elected to go with the slightly more expensive, but more robust, Stand. The rigid design allows a secure base for awkward cycles and offers extreme portability. In our opinion these are much more robust and versatile than the inferior knock off versions you regularly see on the market.

Additional Features:

Easy Assembly - No bolts, screws, or fasteners required. Don't let the heavy duty construction fool you, this bike rack is easy to assemble.

Versatile - Adjustment arms allow adjustment for level and stable storage of any bike you want to hang on it. Must be secured to wall with 4" anchor screw included.

Heavy Duty - Holds up to 125 lbs. Weight 20 lbs. and is 79 inches by 26 inches by 19 inches in size. This is the rack that the others have tried to imitate.

Rock Solid Base - The rigid design allows a secure base for awkward cycles and offers extreme portability.