7 best portable bike repair stand

• LIGHT , STRONG & PORTABLE: The repair stand is made of full light alloy aluminum with heavy duty plastic strong head and clamps. It is light weight, and compact when folded. It is very convenient, durable and well-designed.
• HEIGHT ADJUSTED: Quick Release Adjustable (1m-1.5m or 39"-59" Fully extended). The height, tilt, and angle all have quick release strong skewers. So that is very helpful when wanting to get the bike in the optimal working position for you.
• ROTATED HEAD: Smart design: head rotated:360 Degree by quick release and turning knob. The teeth and clamp are well made and heavy duty. It could hold max. 25 kg or 55 lbs bike at any angle.
• TOOL PLATE: Foldable magnetic tool plate included. Simply attach or remove the tool plate by hand for quick easy set up and storage.
• DURABLE: The bike workstand was released to the market for more than 10 years. It has been approved one of most reliable and durable bicycle repair stands available for home or shop uses. We can offer 5 years warranty on the rack and keep enough parts for any claim in our warehouse.

User questions & answers

Question:	hOW IS THIS STAND DIFFERENT THAN THE "Aluminum Cycle Pro Mechanic Bicycle Repair Stand Rack Bike"http://www.amazon.com/Aluminum-Cycle-Mechanic-Bicycle
Answer:	Two types of stands are both sold by us Cyclingdeal USA INC. They are same quality but from different factories in Taiwan .
Question:	How durable is the Clamp? it appears to be made from plastic
Answer:	I would give it an acceptable rating. The hardware is adequate for what I use it for. If I were to regularly work on bikes I would not buy this product. Specific to the clamp... So far it has not popped out of position or given any indication of being weak. The entire setup is wobbly, but I use it for storing and quick maintenance for my 29 pound mountain bike. It is very portable and gets the job done for DIY maintenance. If you have a bike much heavier than 30 pounds I don't know if I would recommend. A bench or wall mount would be the way to go. My only complaint is that I do find it necessary to rotate the clamping handle and loosen it to securely grab and remove my particular bike (could be my anodized seat post or diameter). If I leave it to where I simply apply pressure or release the handle (aiming to be able to slip my seat post in/out of the clamp, it is not tight enough to hold my bike and the bike's seat post slips down. I'm fairly use to it by now. Overall I rate it 3.5/5 for what I wanted it to do, and a 4/5 for value compared to competing products. Sorry for the long answer- I will post this in the review side.
Question:	Is there enough clearance to rotate a crank with pedals installed? I'm also interested in a stand where I can use my chain scrubber
Answer:	There is more than enough clearance. I rotate our cranks all the time with bike upright on the stand. Plenty of room. Nice stand too, well made & sturdy.
Question:	This stand only has two legs, does it tip
Answer:	As everyone else has noted, this bikestand is very sturdy. While this is true, the question was whether it "tips". I assume this is asking whether it can become unbalanced and topple over. The answer is that it can tip over if care is not taken to maintain the bike in a balanced position on the stand. So, for example, if you remove one wheel only and position the bike so that the side with the remaining wheel hangs too far out, it might take only a nudge to cause it to start tipping over. You could put weights on top of the legs to help prevent this. I wouldn't call it a major problem.

Product features

Patented 360 degree rotating clamp

This allows the bike sitting at any angle by clamping on the frame tubes or seatpost. And it is very easy to rotate the clamp by turning the handle. It is also very stiff after locking.

It is better to clamp on seatpost for your carbon bikes in order to avoid damaging the carbon frame

Clamp and height adjust range

Patented clamp accepts the tube in shape thickness from1 inch to 2.4 inch and width from 1 inch to 2.55 inch tubes.The height adjustment range is 39" to 59".

Magnetic tool plate

Magnetic tool plate is also included in this deal. It makes the tools very handy.

Foldable & Portable

After bike service or repairing, you probably do not need to use the stand for a while. The foldable bike stand is one of the best choices.

It is very easy to fold the legs and head by quick release & lock handle.

Following our video instruction, it only takes less than 15 seconds to fold the bike stand.

Simply place the rack on the shelves or hide in the corner or carry it with you in the car for riding.

The high quality folding mechanism never fails.

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories.

WIDE SELECTION

With more than 2000 high quality and good value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from the factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

• 360 DEGREE ROTATABLE CLAMP & HEIGHT ADJUSTABLE BODY- Clamp with lever can hold your bike super steady, adjustable height make sure your waist comfortable during work
• DURABLE ALUMINUM ALLOY BARREL – Lighter, no corrosion, easy carry, easy storage, intensity of aluminum alloy tested can afford max load 60 pounds bike
• TOOL TRAY WITH MAGNET- Big tray has customized place for different tools, more space-efficient, also magnet can collect crews and nuts without missing
• FRONT WHEEL NO SHAKE- Tighten rod included in the package won’t let the front wheel swivel when you are working, the tighten rod is also length adjustable
• SUPER STEADY TRIANGLE BASE WITH RUBBER FEET- Holds bikes steady, rubber feet antiskid and won’t scratch floor

Product features

Bike Repair Stand Height Adjustable, Whole Aluminum Alloy Shop Home Bicycle Mechanic Maintenance Rack

• SPECS: The Distance From The Center Of The Clamp To The Center Of The Mount Is Approximately 8" (20.5cm), The Distance From The Bench to The Center of the Clamp is Approximately 7.4" 19cm
• ROTATED HEAD: Smart Design: Head Rotated:360 Degree By A Quick Release And Turning Knob. The Teeth And Clamp Are Well Made And Heavy Duty. It Could Hold Max. 25 Kg Or 55 Lbs Bike At Any Angle.
• DURABLE: The Bike Work Stand Was Released To The Market For More Than 10 Years. It Has Been Approved One Of The Most Reliable And Durable Bicycle Repairs Stands Available For Home Or Shop Uses. We Keep Enough Parts For Any Claim In Our Warehouse.
• MOUNTS TO ANY FLAT SURFACE: Mounting Bolts NOT included
• Bikehand QUALITY: ORDER NOW, WORRY FREE! Made in Taiwan We're So Confident About Our Product Quality That If You Have Any Product Issues, We’re Very Happy To Either Provide A Refund Or A Replacement On Your Purchase! We’re Also Here To Support You If You Have Any Questions Or Queries, Please Get In Touch And We’ll Gladly Help.

User questions & answers

Question:	Could this be mounted to a vertical post as well? I have a large beam in my basement I'd like to mount a bike clamp on
Answer:	No
Question:	IS the head removable from the wall mount base so its less obtrusive? I would like to be able to take it off when not in use
Answer:	I would also like to know. Ordered several from Home Depot, but none of them worked. Was able to use the longer of the 2 provided, but it’s only 6 inches away from my vaulted ceiling and not the best option.
Question:	I have an e-bike that weights in at 65 pounds with battery. battery is 8-10 lbs i believe. will this mount hold the weight? i see limit is 55 pounds
Answer:	No it can’t, you can use the short rod. It’s about 6 inches.
Question:	What is the weight of the product with packaging? Thanks
Answer:	You have option of down rod. I’m using the short rod because low cathedral ceiling.

• Fully adjustable clamp fits 1" to 3" (25mm–76mm) diameter tubes and seat posts of any shape and material
• Height adjustable from 39" to 57" (99cm–145cm)
• All-steel structure with durable textured powder coat finish for maximum stiffness and durability
• Folds quickly, easily and compactly for storage, utilizing ergonomic knobs and smooth operating support straps
• Teardrop-shaped tubing adds strength and ensures perfect positioning during use and folding

Product features

ANY BIKE

The PCS-9.2 is able to hold up to 80 pounds (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles (including fat bikes), as well as most e-bikes.

NOTE: The maximum weight holding capacity assumes the weight is centered over the legs.​

ANY SEATPOST

Based on the same design found on our world-famous professional shop stands, the clamp of the PCS-9.2 features narrow jaws (2.7"/7cm) to fit into tight areas or on short seatposts, and adjusts to fit 1" to 3" (25mm–76mm) diameter tubes and seatposts of any shape and material, including aero posts and carbon fiber frames.

ANY POSITION

The PCS-9.2 features 18 inches of height adjustment – from 39" to 57" (99cm–145cm) – putting all parts of the bike within reach for any mechanic whether seated or standing. With 360 degrees of clamp rotation, the PCS-9.2 can hold bicycles in a comfortable position for any procedure – even upside down.

AVAILABLE ACCESSORIES

The PCS-9.2 can be outfitted with accessories to make bicycle maintenance even easier. Used in conjunction with the available #2848A Accessory Collar, the #106 Tool Tray is built to keep tools, lubes and spare parts close at hand. Features two deep-walled compartments, a universal tool/towel bar, a lube holder, an integrated tab system to hold plastic shopping bags for trash, and receiver pods to accept the PTH-1 Paper Towel Holder (available separately).

NOTE: the #2848A Accessory Collar is required to make the PCS-9.2 compatible with the #106 Tool Tray

TRUSTED SINCE 1963

Park Tool built our first bike repair stand over 50 years ago, when our founders needed a more ergonomic and efficient way to service increasingly complex bicycle components. Since those humble beginnings, we have expanded our product line to over 500 tools, stands, and other maintenance equipment. Our mission has stayed the same: to design and manufacture high-quality tools to empower mechanics and riders of all skill levels to service their bicycles. It's the only thing we do, and we're good at it.

• Rotating head adjusts clamp to any angle
• Height adjustable from 45" to 72"
• Clamp allows for clamping of tubes from 30mm to 70mm
• Folding legs allow for easy transportation
• Tool tray Included

User questions & answers

Question:	does it come with the handle bar clamp/holder as pictured
Answer:	Yes,the mountain bicycle repair stand comes with a 360 degree clamp that can attach to the bike seat frame.
Question:	Have any of you washed a bike while on the stand? Does it rust? (I would wipe it dry reasonably well after washing
Answer:	Yes, it is allowed to you to repair 30 or 50 bikes a day, but the bike weight should under 25kg/55lbs.
Question:	What is the rated weight capacity of the stand
Answer:	The bike stand for maintenance comes with a rubber-coated clamp can protect expensive painted frames well.
Question:	can you pedal the bike while on the stand
Answer:	Yes.The bike work stand fits all standard frames to 2.3 inch/6 cm.

Product features

Conquer Portable Home Bike Repair Stand Adjustable Height Bicycle Stand

Proper routine maintenance of your bike will extend its life. The Conquer Portable Home Bike Repair Stand makes it easy to repair and wash a bicycle at home. Work at a comfortable height and angle and keep tools close with the handy tool tray. 



Clean and tune up your bike just like the pros! 



                                                                                                                                                  

Conquer Portable Home Bike Repair Stand Features

Stable and sturdy!

Conquer Equipment products work harder and smarter.

​The rotating head adjusts to any angle. Lock the clamp arm and clamp your bike where you want it.



Work egonomically, no more bending at awkward positions!

• QUALITY PERFORMANCE: This pro bike repair stand boasts premium metal tubing and quick release for clamp, height adjustment, and foldable legs, giving you a convenient maintenance experience with top-performing materials
• FOR CONVENIENT REPAIR WORK: Does it fit your bike? Chances are, if you have 1-1.6” tubes and bikes under 66 lb, the answer is, “yes!” This maintenance stand can hold mountain or road bikes firmly and stably
• BRING THE WORK TO YOU: With a 39.8-67.3 inch adjustable height and 360-degree rotating, quick release clamp, our bike repair workstation lets you bring the work to you so you don’t need to bend over backwards, causing aches and strains
• PACK IT UP: The telescoping tube and foldable legs let you pack this portable bike repair stand in the boot of your car for a race or store it away in a corner, taking up very little space
• WHAT’S INCLUDED: A bike repair stand with adjustable height and a quick release clamp that secures your bike at the right height and angle for an efficient home-repair experience

User questions & answers

Question:	Does the clamp open wide enough to hold a bike by the nose of the seat? Can't clamp my carbon tubes or seat post
Answer:	The bracket is metal, but the clamp to hold the bracket to the vertical bar is plastic. I have not had any issues with it breaking. My only complaint so far is that the clamp for the bike is quite large. It is too wide to hold my wife's bike by the seatpost.
Question:	where is it made
Answer:	27” approx
Question:	Can i buy a replacement clamp head for the usbr06b? works great for the price otherwise
Answer:	I'm not sure what tightening rod your talking about. The only thing I didn't use is the rod that holds the front wheel straight. More trouble than it was worth. Hope it helps.
Question:	What is the 90 degree bracket made of? Is it metal or plastic? I see complaints on other brands about weak plastic
Answer:	its a two piece item out of box, together is one strong stand. legs are very forgiving for apartment use or better for large garage or room. very comfortable to work with. if you have a dual suspension bike clamp seat post or get creative works best on hardtails. its not a compact item but will fit fine in a trunk or standard back seat.

Product features

Clamp Head

Quick release clamp gets bikes in and out of the stand easily;

The thermoplastic rubber grip tubes ranging 1-1.6" tightly without scratching your bike’s paint.

Magnetic Tool Tray

Comes with a magnetic tool tray to hold nuts, bolts, and small hex keys in place so they don’t get lost.

Quick Release Handles

Whether you want to hold your bike high or low, open or fold the legs, quick release handles make it a breeze.

• * HEIGHT ADJUSTABLE: The height of the telescoping stand ranges from 36.2” to 59.8”, meeting your needs of bike maintenance conveniently. This bike repair workstation eases your work because you only need to bend over when it is very necessary.
• * 360 DEGREE ROTATING: The quick-release clamp rotates in 360 degree, easy to reach every part of a bike, holding tightly but will not damage the bike’s finish. The rod with adjustable handlebar stabilizes the front wheel. Both facilitate your work when repairing.
• * CONVENIENT TOOL PLATE WITH MAGNET: A complementary magnetic tool tray is included in the package of the bike repair rack. After installation, the tool tray is very useful to put all the tools you need when repairing. By the magnet and the different partition of different sizes, you can keep tools organized.
• * PORTABLE & FOLDABLE: The telescoping tubes and foldable legs makes it easy to fold and transport. You can put this portable bike repair stand in your car for a race or put it in a corner of the house, very space-saving. When you need to use it, it is convenient to assemble and set up.
• * DURABLE & STRONG: Due to heavy duty construction, the bike maintenance rack supports bike up to 66lb with round crossbar ranging from 1”-1.57”, holding your bike with stability. Premium steel tube is the main part of the bike workstation, so you can use it for a long time.

User questions & answers

Question:	I need to replace the Knurled Clamping Knob, does anyone know what size it is
Answer:	If the accessory was broken, plz contact us and we will help solve the problem, thank you.
Question:	How long are the legs? How much floor space Doss it take
Answer:	Each of the 3 legs are 32 inches.
Question:	How does it work on a step through frame with no top bar
Answer:	The clamping mechanism can be rotated 360 degrees therefore you could potentially clamp it on any part of the main frame. Ideally towards the center of the frame as opposed to the rear fork.
Question:	What is the max weight for this stand
Answer:	The listed stats above says 66lbs.

Product features

UNISKY BIKE REPAIR STAND

Ride with freedom, live with wisdom. UNISKY bike repair stand is one of the best choices for you. A bike repair workstation is necessary for lubricating the chain, swapping tires, adjusting the derailleurs, or assembling a new bike. Such a bicycle repair stand, heavy duty, height adjustable, 360 degree rotatable, portable, foldable, with good value, will meet all your expectations.

QUCIK LOCK & RELEASE HANDLE

It is very easy to fold or unfold the legs. By watching our video instruction, you can fold the bike stand in less than 30 seconds.

MAGNETIC TOOL TRAY

Equipped with a magnetic tool tray, you can use all the tools by hand during your work and all the tools can be kept organized.

EASY-TO-HANDLE KNOB

Tighten the knob, then the stand clamp is locked and the head cannot turn. Loosen the knob, the head can turn freely.

FOLDABLE & PORTABLE

The foldable and lightweight feature makes this bike repair stand easy to store at any corner and carry with, and ready to begin work anytime and anywhere.

PRODUCT DETAILS:

Material: premium steel

Maximum bearing capacity: 30kg (66 pounds)

Diameter of bike crossbar range: from 1” to 1.57”

Height range: 36.2” to 59.8”

Item weight: 6.5kg (14.33lb)

Package weight: 7.5kg (16.53lb)

Color: black stand

Other Information：

* The height of the telescoping stand ranges from 36.2” to 59.8”, meeting your needs of bike maintenance conveniently. This bike repair workstation eases your work.

* Before you assemble the bicycle maintenance rack, you can watch the video at the listing page.

* Before moving the repair stand, please remove your bicycle at first.

* When you are repairing or assembly a bike, please do not move the legs of this workstand.