12 best bike cleaning tools

• Four-piece cleaning brush set designed specifically for the shapes and materials of bicycles
• Soft bristle soaping brush for general cleaning
• Sponge/bristle combination brush for heavy duty scrubbing
• Tapered bottle brush for detailed cleaning of tight areas
• GSC-1 Gearclean brush features tough nylon bristles and curved toothed pick to clean grit and grime from gears and small components

User questions & answers

Question:	I got a lot of grease on the brush that has the scrub pad. Is there any kind of solvent or cleaner I can use to get the brush usable again
Answer:	Yes there is a chapter on disc brakes and maintenance associated with the brakes. Very good chapter
Question:	Can you put these brushes in the dishwasher to clean ??? J. Payne
Answer:	251 pages, 8 1/2 by 11. 19 chapters
Question:	Is it easy to carry
Answer:	Not hardcover, paperback.
Question:	How big is the tapered detail brush; will it fit between chain links
Answer:	2019. For more info, go to https://www.parktool.com/product/big-blue-book-of-bicycle-repair-4th-edition-bbb-4

Product features

TRUSTED SINCE 1963

Since our origins in the back of a bike shop in 1963, it has been our sole mission to design and manufacture high-quality tools that empower mechanics and riders of all skill levels to service their bicycles. Each one of our 500+ tools is a product of our decades of experience and expertise in the industry, in the shop and on the trail.

• Complete cleaning solution for cleaning bike chains, rear cogs, and chainrings
• Includes chain scrubber, gear brush, and degreaser
• Cyclone Chain Scrubber cleans chains quickly, easily, and effectively
• GearClean brush reaches deep between gears and other places where dirt collects
• ChainBrite Chain and Component Cleaning Fluid is plant-based and will not harm alloy, plastic, rubber or carbon fiber

User questions & answers

Question:	How do you dispose of the cleaning solvent. Can it go in the sanitary sewer or does it need to be disposed of as haz waste
Answer:	I pour it into a container. Once I have enough collected degreaser I run it through a pour over coffee filter like this one https://www.amazon.com/HIC-Harold-Co-2664-Coffee/dp/B001S3B9F8 (Pro tip: do not use this for coffee, get a second one for that!). and reuse the solvent.
Question:	will gear brush tool fit 12spd
Answer:	It will work with SRAM 12 speed and Ultegra 11 speed (I have used it on both). I would be shocked if it wouldn't work with my [sadly long gone] 6 speed bike from 1983. Chain widths have changed a little, but the brushes are not a fine tuned implement - they just slather the metal bits.
Question:	How important is it to have a bike stand in order to clean your chain, and does a dummy hub eliminate the need for a stand
Answer:	I would think that a dummy hub would work. All you really need is an ability to keep the bike stationary roll rotating the chain, keeping the chain parallel to the ground. if you tilt the chain, the fluid starts pouring out of the device. I use my bike stand, and then pedal the bike backward.
Question:	How can used cb-4 bio chainbrite degreaser be disposed of in an environmentally safe way
Answer:	I pour it into a container. Once I have enough collected degreaser I run it through a pour over coffee filter like this one https://www.amazon.com/HIC-Harold-Co-2664-Coffee/dp/B001S3B9F8 (Pro tip: do not use this for coffee, get a second one for that!). and reuse the solvent.

Product features

CM-5.3 Cyclone Chain Scrubber

Cleans bicycle chains quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Park Tool CM-5.3 Cyclone Chain Scrubber uses an extra-large solvent reservoir and a series of rotating brushes to get chains sparkling clean. A magnet at the bottom of the Cyclone’s solvent reservoir draws particles scrubbed from the chain, effectively keeping them from being redistributed on the chain during cleaning. The durable sponge material draws solvent from the chain as it exits the Cyclone, reducing drips and mess. The brushes and sponge of the CM-5.3 are replaceable (part # RBS-5).

GSC-1 GearClean Brush

Park Tool’s GSC-1 GearClean Brush has a unique design. A large comfortable handle with a curved, toothed-end reaches dirt deep between the gears, and tough nylon bristles clean the derailleur and chain. Saves wear and tear on your chain and freewheel. Works great on brakes or other places where dirt collects.

CB-4 Bio ChainBrite

Park Tool Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in the CM-5.3 Cyclone Chain Scrubber, or with a scrubbing brush as a general purpose degreaser. When used with a chain cleaner, CB-4 gets bicycle chains clean inside and out so they're good as new. Will not harm alloy, plastic, rubber, or carbon fiber parts, so it's safe to use for cleaning cassettes, chainrings, pulleys, or any other component that accumulates muck and grime.

TRUSTED SINCE 1963

Since our origins in the back of a bike shop in 1963, it has been our sole mission to design and manufacture high-quality tools that empower mechanics and riders of all skill levels to service their bicycles. As with our other 500+ tools, the Cyclone Chain Scrubber is a product of our decades of experience and expertise in the industry, in the shop and on the trail.

• 8 Pieces Precision Bicycle Cleaning Brush Tool , include Professional Bike Chain Scrubber+ Chain Cleaning Brush+Tire Scrubber+Tarpered Detail Brush+Wheel Brush+Sprocket Scraper+Sprocket Brush+Bike clean mitt
• Apply to all bicycles, For free wheel designs, simply attach the cleaner to the chain and use the pedal to turn the chain. For bikes with coaster brakes, the bicycle must be elevated or flipped over in order to work
• Different brush fits for different parts of bike,this can efficiently and easily remove dirt from hard to reach areas.
• The chain cleaning process is very easy. Just mount the chain scrubber under the bike chain, and then put some degreaser into the scrubber, hold the chain scrubber with left hand and turn the pedal with right hand in the counterclockwise direction for cleaning.
• The cleaning kit can do basic maintenance work when not ride, even can be used as daily household cleaning tools.

User questions & answers

Question:	Does this come with degreaser? If it doesn't, what liquid degreaser would you recommend
Answer:	It does not. I would not buy this but would.buy the Park Tool for a little more. It comes with enough degreaser for about 3-4 times and has a much better chain cleaner. Good luck.
Question:	What's the warranty
Answer:	What warranty?

Product features

Anndason 8 Pieces Precision Bicycle Cleaning Brush Tool Including Bike Chain Scrubber, suitable for Mountain, Road, City, BMX Bike and Folding Bike

This is a special cleaning kit for bicycles.

8 Pieces Bicycle Cleaning Brush Tools, include Professional Bike Chain Scrubber+Chain Cleaning Brush+Tire Scrubber+Tarpered Detail Brush+Wheel Brush+Sprocket Scraper+Sprocket Brush+Bike Clean Mitt. These tools help you clean your bicycle very well.No need to buy more cleaning tools.

Bicycle is our best friend. After a long journey, the bicycle is covered with sludge, we need to help him clean and rest at this time.After cleaning, start the journey again.

Usage: For all kinds of bikes: Mountain Bike, Road Bike, City Bike, Hybrid Bike, BMX Bike and Folding Bike

Product description

Material: Plastic+ Coral velvet

Color: Orange



bike clean mitt

tapered detail brush

tire scrubber

gear clean scraper

gear clean brush

frame tube cleaning brush

Chain Brush.



BUY WITH CONFIDENCE

You would love these tools which make bike clean easy. The high quality cleaner kit

will help with your cleaning work effectively.

if you have any questions or problems, please contact us directly for help by e-mail at anytime

• The products are made of plastic and corals, small in size, lighter in weight, easy to receive and carry.
• Bicycle clean set, include bike clean mitt + tapered detail brush + tire scrubber+ gear clean scraper+ gear clean brush + frame tube cleaning brush + Chain Brush. A total of 7 cleaning tools to meet all of your needs.
• Easy to Clean, different brush fits for different parts of bike, this can efficiently and easily remove dirt from hard to reach areas or any other hygienic dead corners.
• Multipurpose, works for Mountain bikes, Road bikes, City bikes, Hybrid bikes, BMX Bike and Folding Bikes.
• The cleaning kit can do basic maintenance work when not ride, even can be used as daily household cleaning tools.

Product description

Professional Bicycle Cleaning Tools Kit Specifications:

Material: Plastic + Coral Velvet + Sponge

Chain Cleaning Brush: 9.8 Inch perfect cleaning tools for bicycle chain

Tire Scrubber: 6.7 Inch tire screbber to clean dead corner of tire

Tapered Detail Brush: 9.4 Inch brush can be used all kinds of need.

Wheel Brush: 4.1 Inch wheel brush to keep your wheels clean and tidy

Sprocket Scrapper: 3.4 Inch sprocket scrapper to clear stain and enhance cleanliness

Sprocket Brush: 9.4 Inch to clean stain and enhance cleanliness

Bike Clean Mitt: 8.7 Inch bike clean mitt is more convenient and cleaner than ordinary rags

Bike Chain Scrubber: 4.7 Inch bike chain scrubber ,say goodbye to stains on your bicycle chain

Bike Cleaning Set Package Includes

2 * Chain Cleaning Brush

1 * Tire Scrubber

1 * Tapered Detail Brush

1 * Wheel Brush

1 * Sprocket Scrapper

1 * Sprocket Brush

1 * Bike Clean Mitt

1 * Bike Chain Scrubber

Bicycle Cleaning Tools Usage:

For all kinds of bikes: Mountain Bike, Road Bike, City Bike, Hybrid Bike, BMX Bike and Folding Bike.

• 9 Pieces Precision Bicycle Cleaning Brush Tool - Include 1PC Professional Bike Chain Scrubber+2PCS Chain Cleaning Brush+1PC Tire Scrubber+1PC Tarpered Detail Brush+1PC Wheel Brush+1PC Sprocket Scraper+1PC Sprocket Brush+1PC Bike clean mitt.
• Apply to all bicycles - For free wheel designs, simply attach the cleaner to the chain and use the pedal to turn the chain. For bikes with coaster brakes, the bicycle must be elevated or flipped over in order to work.
• Easy to clean the bicycle chain - Just mount the chain scrubber under the bike chain, and then put some degreaser into the scrubber, hold the chain scrubber with left hand and turn the pedal with right hand in the counterclockwise direction for cleaning.
• Pratical - Different brush fits for different parts of bike,quickly, easily and effectively to clean your bike corner dirt, the gunk of chain.The cleaning kit can do basic maintenance work when not ride, even can be used as daily household cleaning tools.
• Easy to take - The products are made of plastic and corals, small in size, lighter in weight, easy to receive and carry.

Product description

Don't ruin another toothbrush trying to get the grease out from between the gears on your bike when Finish Line has a set of brushes specifically designed for every crevice. The Easy Pro Brush Set features 5 different brushes to remove mud, dirt, and road grime from frame and components. The brushes are also ideal for motorcycles and automobiles. The Finish Line Easy Pro Brush Set comes with a 22cm ball chain from which to hang them after use. They come in One color.

• Different brushes to tackle any cleaning job
• Great for cleaning bicycles, motorcycles, and automobiles
• Includes chain for hanging after use
• User guide on back of card

• Cleans bicycle chains quickly, easily, and effectively without requiring removal
• Improves shifting performance and extends the life of drivetrain components
• Series of rotating brushes and wicking sponge get chains sparkling clean
• Strong magnet at the bottom holds metallic particles scrubbed from the chain
• Reversible handle allows chain to pass through in either direction for compatibility with center drive e-bikes

User questions & answers

Question:	How do I clean Chain Scrubber itself after it collected all the grease dirt fell from the chain inside the cleaner
Answer:	I would probably use a degreaser to remove the buildup and wipe any remainder out with a cloth or paper towel.
Question:	Do you really need a bike hoist or will upside down work fine
Answer:	Anyone who does their own bike maintenance should really consider a quality bike repair stand to assist in this simple maintenance item.
Question:	Excuse the newbie question here.. what changes in performance have you seen after cleaning your chain with this tool
Answer:	Clean chain is key to shifting performance (cleaner shifts & less dropped chains). Maybe even more important, dirty chains wear down chain rings & cassettes much faster. This tool is great. Get a good degreaser too, and you’ll be in good shape.
Question:	What’s the difference between the new 5.3 version and the
Answer:	I had an earlier version and I would say the major difference is the 5.3 version is made of sturdier material, less brittle plastic. Also the clips that hold it in place seem to be more firmly attached. The handle on this version can be attached to either side as well. I think that is to accommodate e-bikes, where the chain is run in the opposite direction for cleaning compared to road bikes.

Product features

TRUSTED SINCE 1963

Since our origins in the back of a bike shop in 1963, it has been our sole mission to design and manufacture high-quality tools that empower mechanics and riders of all skill levels to service their bicycles. As with our other 500+ tools, the Cyclone Chain Scrubber is a product of our decades of experience and expertise in the industry, in the shop and on the trail.

Product description

Why Oumers:

Oumers INC. mainly engaged in the development and export of products with high quality, stylish design.

Oumers has always adhered to " High quality products , good customer experience" business purposes.

Committed to providing you with high-quality products and quality services.



Features:

A Dirty Bike Assembly Parts Cause Poor Shifting and Unnecessary Wear to Expensive Parts.

Our Bicycle Clean Brush Kit Contains Everything Needed to Quickly and Easily Clean the Chain,

Freewheel Cogs, Chain Rings, Crank, Tire ,Sprocket, Cassette and so on.

Package include: 6pcs Cleaning Tools--Tire Scrubber, Tarpered Detailing Brush, Wheel Brush, Sprocket Scraper, Sprocket Brush, Bike clean mitt

Usage: for all kinds of bikes--Mountain Bike, Road Bike, City Bike, Hybrid Bike, BMX Bike, Folding Bike and so on

Notice:

Further if you have any questions or problems, please contact us directly for help by e-mail at anytime.

we will do our best to help until it is fully resolved.

• Easy to Clean Dirt-- this bike cleaning tools with ergonomically designed handle which is economize labour and definitely helps with hard to reach areas cassette and derailleur, or any other hygienic dead corners
• Complete Function-- assortment of brush for bike including: Bike clean mitt, gear clean scraper, gear clean brush, tapered detail brush,tire scrubber, frame tube cleaning brush tackle any cleaning difficult job
• Apply to All Bike--like mountain bike, road bike, city Bbike, hybrid bike, BMX Bike, folding bike
• Pratical --help keeping your bike new as before and even can be use as daily household cleaning tool
• Bike cleaning tool set material: Plastic/Coral Velvet. Durable and Light weight

User questions & answers

Question:	What are the measurements of the bag? I want to find a gift bage for it
Answer:	No

• Specially designed cleaning brush for bicycle drivetrain components
• Curved toothed end reaches deep between cassette gears
• Tough nylon bristles clean derailleur, chain, or any other components where dirt collects
• Handy size for quick cleaning anywhere
• Made of sturdy nylon

User questions & answers

Question:	Can i use this to brush my teeth
Answer:	Actually, I don't think they make frames attached to headboards anymore. This is the 4th bed assembly I've put together (from 4 different companies) and all of them did not havve the clamps and screws to attach the frame with the headboard. however, i recommend this headboard to anyone because all you have to do is drill 1/4" wood screws into the headboard (using the frame's holes as a guide), and wha-la!! I've have my bed assembled for 2 years now, and it is the still sturdy as the day I assembled it.
Question:	Can I use this on my bike with 8 cogs on the cassete
Answer:	Size 10 correspond to size M (Bust 36", Waist 34", Length 34", Sleeve 27").
Question:	Do I have to remove the chain
Answer:	S: Bust 32", Waist 30", Length 32", Sleeve 25" M: Bust 36", Waist 34", Length 34", Sleeve 27" L: Bust 38", Waist 36", Length 36", Sleeve 28"
Question:	what does the curved end of the brush used for
Answer:	I cannot tell you what the dress was made of as it was a gift. But I can tell you that I was impressed with how nice I thought the fabric was. I also remember it had some stretch to it. And the taupe color was much as shown. Hope this helps.

Product features

TRUSTED SINCE 1963

Since our origins in the back of a bike shop in 1963, it has been our sole mission to design and manufacture high-quality tools that empower mechanics and riders of all skill levels to service their bicycles. Each one of our 500+ tools is a product of our decades of experience and expertise in the industry, in the shop and on the trail.

• LIGHT , STRONG & PORTABLE: The repair stand is made of full light alloy aluminum with heavy duty plastic strong head and clamps. It is light weight, and compact when folded. It is very convenient, durable and well-designed.
• HEIGHT ADJUSTED: Quick Release Adjustable (1m-1.5m or 39"-59" Fully extended). The height, tilt, and angle all have quick release strong skewers. So that is very helpful when wanting to get the bike in the optimal working position for you.
• ROTATED HEAD: Smart design: head rotated:360 Degree by quick release and turning knob. The teeth and clamp are well made and heavy duty. It could hold max. 25 kg or 55 lbs bike at any angle.
• TOOL PLATE: Foldable magnetic tool plate included. Simply attach or remove the tool plate by hand for quick easy set up and storage.
• DURABLE: The bike workstand was released to the market for more than 10 years. It has been approved one of most reliable and durable bicycle repair stands available for home or shop uses. We can offer 5 years warranty on the rack and keep enough parts for any claim in our warehouse.

User questions & answers

Question:	hOW IS THIS STAND DIFFERENT THAN THE "Aluminum Cycle Pro Mechanic Bicycle Repair Stand Rack Bike"http://www.amazon.com/Aluminum-Cycle-Mechanic-Bicycle
Answer:	Two types of stands are both sold by us Cyclingdeal USA INC. They are same quality but from different factories in Taiwan .
Question:	How durable is the Clamp? it appears to be made from plastic
Answer:	I would give it an acceptable rating. The hardware is adequate for what I use it for. If I were to regularly work on bikes I would not buy this product. Specific to the clamp... So far it has not popped out of position or given any indication of being weak. The entire setup is wobbly, but I use it for storing and quick maintenance for my 29 pound mountain bike. It is very portable and gets the job done for DIY maintenance. If you have a bike much heavier than 30 pounds I don't know if I would recommend. A bench or wall mount would be the way to go. My only complaint is that I do find it necessary to rotate the clamping handle and loosen it to securely grab and remove my particular bike (could be my anodized seat post or diameter). If I leave it to where I simply apply pressure or release the handle (aiming to be able to slip my seat post in/out of the clamp, it is not tight enough to hold my bike and the bike's seat post slips down. I'm fairly use to it by now. Overall I rate it 3.5/5 for what I wanted it to do, and a 4/5 for value compared to competing products. Sorry for the long answer- I will post this in the review side.
Question:	Is there enough clearance to rotate a crank with pedals installed? I'm also interested in a stand where I can use my chain scrubber
Answer:	There is more than enough clearance. I rotate our cranks all the time with bike upright on the stand. Plenty of room. Nice stand too, well made & sturdy.
Question:	This stand only has two legs, does it tip
Answer:	As everyone else has noted, this bikestand is very sturdy. While this is true, the question was whether it "tips". I assume this is asking whether it can become unbalanced and topple over. The answer is that it can tip over if care is not taken to maintain the bike in a balanced position on the stand. So, for example, if you remove one wheel only and position the bike so that the side with the remaining wheel hangs too far out, it might take only a nudge to cause it to start tipping over. You could put weights on top of the legs to help prevent this. I wouldn't call it a major problem.

Product features

Patented 360 degree rotating clamp

This allows the bike sitting at any angle by clamping on the frame tubes or seatpost. And it is very easy to rotate the clamp by turning the handle. It is also very stiff after locking.

It is better to clamp on seatpost for your carbon bikes in order to avoid damaging the carbon frame

Clamp and height adjust range

Patented clamp accepts the tube in shape thickness from1 inch to 2.4 inch and width from 1 inch to 2.55 inch tubes.The height adjustment range is 39" to 59".

Magnetic tool plate

Magnetic tool plate is also included in this deal. It makes the tools very handy.

Foldable & Portable

After bike service or repairing, you probably do not need to use the stand for a while. The foldable bike stand is one of the best choices.

It is very easy to fold the legs and head by quick release & lock handle.

Following our video instruction, it only takes less than 15 seconds to fold the bike stand.

Simply place the rack on the shelves or hide in the corner or carry it with you in the car for riding.

The high quality folding mechanism never fails.

BICYCLE EXPERTS

We design and develop premium bicycle parts and accessories.

WIDE SELECTION

With more than 2000 high quality and good value products, you will always find what you need.

SOURCING TOP PRODUCTS

All the products we stock are carefully selected from the factories in the cycling industry.

PRODUCT VIDEOS

Our team are working hard to try add videos of all the products we are selling. This will allow customers to have a visual image of the products and learn how to use it before purchasing.

• Easy to Clean Dirt--bristles are sturdy enough to clean in between cassette cogs, derailleur areas that are tricky to get into to clear the mud and dirt, perfect for most of your drive-train£¬long-term struggle all kinds of cleaning
• Bicycle Clean Brush Set including: Bike clean mitt, 2pcs gear clean sprocket scraper, 2pcs gear clean sprocket brush, 2pcs tarpered detail brush, tire scrubber, 3-sided Bristles, duster cloth
• Apply to all bicycles, For free wheel designs, simply attach the cleaner to the chain and use the pedal to turn the chain. For bikes with coaster brakes, the bicycle must be elevated or flipped over in order to work
• Practical - Our this bicycle cleaning tools can do basic maintenance work when not ride, help keeping your bike new as before and even can be use as daily household cleaning tool
• This bicycle cleaning brushesare made of plastic and corals, small in size, lighter in weight, easy to receive and carry

• COMPACT – Including 7 different Tools: Chain Cleaning Brush, Tire Scrubber, Wheel Brush, Sprocket Brush, Tapered Detail Brush, Sprocket Scrapper and Bike Clean Mitt. Less than 0.7lb, compact, and easy to carry.
• ERGONOMIC DESIGN - Different brushes fit for different parts of bike. With ergonomically designed handle, you will grip each brush comfortably. Efficiently and easily remove dirt from hard to reach areas
• MULTI-PURPOSE - Works with all types of bikes. For free wheel designs, simply attach the cleaner to the chain and use the pedal to turn the chain. For bikes with coaster brakes, the bicycle must be elevated or flipped over in order to work
• PRACTICAL - This kit even can be used as daily household cleaning tools
• BUY WITH CONFIDENCE: The cleaning kit can do basic maintenance work when not ride, even can be used as daily household cleaning tools.

User questions & answers

Question:	Is it good enough quality to transfer over this kit to a motorcycle
Answer:	My bed is 29" to the top of the mattress, so the only part that would show is the storage compartment. The bed in the sample pictures looks like it is a fair bit lower. Propping it up may be necessary to get a better look and useful headboard function. Unless laying your head on the shelf inside the storage area is an option, I guess.