11 best mini pump with gauges

• Quick Pumping Power & Accurate Inflation - High pressure 100 psi/6.9 bar. Oversized piston design enables this portable pump to reach riding pressure with 30% fewer strokes compared to conventional mini bike pumps. Flexible air hose design works with awkward or tight valve placements. Air hose cleverly stored in handle to maximize compactness. The hose features an Integrated Pressure Gauge so you can accurately pump to your desired air pressure!
• Durable, Compact & Lightweight - Stunning design and finish. Superior quality CNC machined aluminum alloy with durable and precise parts - this pump is built to last! 8.75 inches long and weighing in at only 4.5oz. Check out our ‘How to Video’ in the ‘Related Video Shorts’ section. Please note this mini bike pump with gauge is not a replacement for a ‘full size floor pump’ which will deliver larger air volume per pumping stroke due to it’s much bigger size barrel.
• Super Tight Presta & Schrader Connection with No Leaks - Easy switching between Presta & Schrader valves thanks to innovative hose design - No adapters needed! Secure thread-on valve connection, enables a super tight seal with no air leaks and no more damaged bike tire valves! Not compatible with non threaded valve extenders. For Presta valves with removable cores, extra care should be taken to tightly screw the core into the valve stem.
• No Pump Rattles or Lost Pump with our safe & secure frame mount bracket with extra security strap. Pre-drilled holes in bike frame required for installation of pump mount.
• ‘Best Buy Award Winner’ By Outdoor Gear Lab, an Amazon Verified Expert - We’re very proud to have been awarded their ‘Best Buy Award’ for ‘quality products that offer the most bang-for-the-buck’ in their Best Bicycle Frame and Mini Pump Review.

User questions & answers

Question:	Will this mount in-line with the bike frame using the spare water bottle cage mounts? The pic shows it off to the side with an exisiting bottle cage
Answer:	Hi Valerie, Thank you for your query. Yes, our mini mike bump works in almost all kinds of bike tires as long as it has a presta or schrader valve. I hope this help.
Question:	I have a fat bike. What is the lowest pressure that the gauge shows. Is it less than 10psi
Answer:	I tested the pump when it arrived and it did a good job of inflating a 29x2.0 commuter tire.
Question:	Where can I get a replacement mounting bracket for this pump
Answer:	Hi JamieMany thanks for your question - yes this bike pump can be used to inflate sports balls (including basketballs, soccer balls etc), however you'll need to purchase the sports needles separately which are normally pretty cheap to buy. Alternatively our mini floor pump which is slightly larger, but has greater pumping power ....does come with sports balls needles: https://www.amazon.com/dp/B01BVOUI2S/ref=twister_B01BVOUHW4?_encoding=UTF8&psc=1I hope this helps.Kind regardsChrisPro Bike Tool
Question:	Where is this product manufactured
Answer:	Hi Ranger TomThanks for your question - yes the pump works with Schrader valves, although it will take a long time to pump to 35 psi for a motorcycle tire due to the large tire volume.Hope this helps.Kind regardsMikePro Bike Tool

Product features

HIGH QUALITY, LIGHTWEIGHT & EASY TO USE

Our high quality mini bike pump with gauge is a 'design masterpiece' that’s easy to use and delivers fast & accurate inflation when you need it the most - so you can get back quickly to the joy of your ride.

Pump bracket included to mount the pump onto your bike frame for convenient and easy access when you need it. Pump handle ‘snaps’ into the bracket and is further secured with the extra rubber security strap. Bracket requires holes in bike frame to install on a bike frame. Bike bolts already supplied with your bike are suitable for installation and should be used to secure the bracket onto the bike frame. Due to its small size, the pump can also be stowed in a cycling jersey back-pocket or back pack.

Pump dimensions: 8.75 inches (22 cm) long, 1.5 inches wide (3cm).

To understand how to use our Mini Bike Pump with Gauge, please check out our 'How to' and 'FAQ' videos in the 'video shorts' section'.

FLEXIBLE HOSE WITH INTEGRATED PRESSURE GAUGE

Our innovative flexible hose with in-line pressure gauge is cleverly stored inside the handle and barrel of the pump to maximize compactness. The flexible hose design takes the stress off the valve stem and attaches securely to ensure no air can escape during inflation.

The pressure gauge readout starts at 20 psi (full line), then 30 psi (half-line), then 40 psi (full line) and so on up to 100 psi. As such the gauge is not suitable for low pressure tires e.g. fat tires.

The hose valve head should be screwed down ‘deeply’ onto the tire valve, this, in turn, creates a full seal allowing all the air to be pushed through when pumping and the gauge will rise accurately and smoothly.

PRESTA & SCHRADER COMPATIBLE

Designed to work with threaded Presta & Schrader tire valve types. Each end of the pump hose features specific valve heads for Presta & Schrader for a great tire valve connection with no leaks when pumping. No adapters needed!

For Presta valves with removable cores, extra care should be taken to tightly screw the core into the valve stem so it’s nice and 'snug' - you can either use pliers or a valve core tool to tighten the core. This process is the same when using this type of valve with any type of bike pump or CO2 inflator. Presta valves with 'removable cores' are primarily designed if you use valve extenders or use a tire sealant such as 'slime’. Bike pump is not compatible with valve extenders.

BEST SELLERS

With over 450,000 bike tools and products sold so far - that many people can't be wrong!

AWARD WINNING

Award Winning Products including Outdoor Gear Lab's Best Buy Award Winner (August 2018) for 'quality products that offer the most bang-for-the-buck’.

COMMUNITY

We've partnered with cyclists and cycling teams around the world to support all areas of cycling.

PASSION

Everyone on the PRO BIKE TOOL Team is a passionate cyclist, this is what we love!

Who We Are

PRO BIKE TOOL was born in 2015 when founder Chris left the safety & security of corporate life to follow his passion for cycling.

Taking a huge leap of faith into the world of entrepreneurship, Chris dedicated himself to building a business that produces the highest spec tools at a value making them accessible to all riders.

We pride ourselves on giving you the ultimate user experience. From our top-quality products to our commitment to great service, we’re here to make your life easy.

Product description

The smallest morph style pump is big on features. Fold out foot pad adds stability while pumping. T-handle styled handle adds leverage and comfort while pumping. Flexible hose helps reduce stress on tube valves. In-line gauge provides precise and accurate inflation. Mounting bracket included.

• GAUGE - In-line gauge, Reads 140 psi/9.6 bar
• Fold out foot pad for increased stability
• Flexible hose helps eliminate stress on valves
• HEAD - Fits Presta/Schrader/Dunlop valves
• HANDLE - T-type dual density polymer
• BARREL - Butted aluminum
• THUMB LOCK - Plastic

User questions & answers

Question:	can i find parts to repair this pump ? and is this good for a mountain bike
Answer:	Yes there are serviceable parts available - Depending on the size of your tire I run 28mm Road Tire’s and it takes approximately 90 seconds to reach 80 psi and I have inflated up to 120 psi on a 23mm
Question:	Can the bracket be attached to a different part of the bike frame via zip ties
Answer:	You can attach it anywhere there is space and it’s not in your way. I have a full frame bag so mine is on the back of my seat tube between the chain stays and the rear wheel. Works perfect!
Question:	How does this work with a Schrader valve
Answer:	Yes, both Schrader and Presta.
Question:	What are the increments on the gage? i bought the road morph but the first increment is already at 30psi! i am looking to read 10-30, cyclocross/mtb
Answer:	Does not provide increments below 30 psi either. Sorry, probably not what you wanted to hear.

Product features

Centerline Mount Bracket

T-handle

T-type dual density polymer

Fold-Out Foot Pad

Flexible Hose

HEAD Fits Presta / Schrader / Dunlop valves

SIZE 26 x 5 x 2.8 cm / 10.2” x 2.0” x 1.1”

WEIGHT 154 g / 5.43 oz

CAPACITY 160 psi / 11 bar

Gauge

In-line gauge Reads 140 psi / 9.6 bar

Material

BARREL Butted aluminum

THUMB LOCK Plastic

• Faster Inflation - 110 PSI: Designed for quick inflation with a high volume, long barrel allowing more air flow per pump, reaching 110 PSI with ease
• Accurate Gauge - Inline pressure gauge is integrated into the pump hose - 360 degree PSI window - Perfect air pump for road and mountain bike tires
• "Super-Seal" Valve Won't Leak - Schrader & Presta: The bicycle pump comes with "Super Seal" connector that screws to both presta and schrader valves - seals tight with no leaks. The flexible hose allows for easy valve access without bending or damaging them.
• Secure Mounting Bracket: Pump comes with a mounting bracket that screws to the bottle cage holes - the mini pump locks into place and is held tight with a silicone band that won't pop out when riding, and no annoying bike pump rattling.
• Ironclad Warranty - Backed by a 5-year manufacturers warranty. This Mini Pump is designed by cyclists for cyclists and built to last.

User questions & answers

Question:	Has anybody used this to air to air up their onewheel tire
Answer:	This pump doesn't work on anything! It's a piece of junk. I know how to use bike pumps, but this one would not put air in. Someone is getting paid for positive reviews.
Question:	Is there a how to use video? I cannot seem to get this to work for me. All it does is let air out vs in
Answer:	Dear consumer Hello, thank you for your question, Drchop bike pump can be used for tubeless tires, it is suitable for Presta & Schrader Valve, you can choose according to your bicycle tire inflation port type
Question:	Can this unit be used as a shock pump as well
Answer:	I have a water bottle bracket that I could have mounted it on. But, it fits in my bike pouch.
Question:	How long is pump
Answer:	No

Product features

Performance Mini Bike Pump with Gauge

Built to Last

This pump is designed by cyclists for cyclists and is thoroughly tested for high performance inflation.

High Pressure

Inflates to 110 PSI with ease, suitable for both road and mountain bike tires

Built in PSI Gauge

Presta and Schrader - attaches tight to both valve types, valves with "Super Seal" adapter

STRONG AND LIGHTWEIGHT

Made with CNC aluminium parts, the pump is the perfect balance of strength, allowing for high pressure pumping, yet still being lightweight

SUPER SEAL' ADAPTOR

The “super seal” threaded adaptor screws with a tight seal and no air leaks, and is compatible with both Presta and Schrader bikes valves

ACCURATE PSI GAUGE - 110 PSI

With its built in pressure gauge you can pump to your desired PSI with confidence

SECURE FRAME MOUNT

The frame mount and straps hold the pump tightly in place, with no any annoying rattlings or jiggles when riding

INNOVATION

Vibrelli engineer their products to deliver superior function, using world leading precision manufacturing.

EXPERIENCE

Vibrelli gear is created by riders for riders, the Vibrelli team use their own gear to constantly improve the products.

DURABLE

There’s nothing worse than kit that lets you down when you rely on performance, which is why Vibrelli products are field tested for durability and are built to last the distance.

RELIABLE

Vibrelli is committed to producing the highest quality products that our customers will love. Quality you can rely on.

• No Valve Changing or Adaptors Needed: Automatically locks onto both Presta and Schrader tire valves
• 120 PSI Extendable Telescope: Easily switch from high-volume to high-pressure
• "Super-Fit" Clever Valve: No leaks, firmly grips both Schrader and Presta valves automatically
• Mounting Bracket: Attaches the tire pump to your bike, added velcro strap holds the pump firmly in place
• Includes: Glue-less puncture kit, be prepared for a flat tire anywhere

User questions & answers

Question:	whats the size and weight
Answer:	There are replacement kits. I have purchased several on Amazon.
Question:	Can the seller confirm the actual length of this thing (while closed)? Why is this not in the listing
Answer:	Yes
Question:	Can it fot in a saddlebag that is 7.5 in
Answer:	You can use this with Blu-ray discs, however you must use caution, and there is a limit to what you can correct. The manual has a section explaining how to properly work on Blu-ray discs.
Question:	I ordered this pump. does it come with the (schrader and presta) pump adapters?. I did not receive it
Answer:	this is a refill kit for the JFJ machine that repairs disc's. The machine works really well. I had some badly damaged disc's and it made them almost like new. Not cheep but the best machine i have found.

Product features

YOUR SIDEKICK ON THE ROAD & TRAIL

Easily switch between Presta and Schrader valves using the ‘Super Fit Clever Valve’, no valve changing needed.

Includes Mini Glueless Patch Kit

Emergency glueless patch kit included. No glue needed, simply peel and apply and be riding in minutes. Never be caught out with a puncture again.

Pumps to 120 PSI - Telescope Design

The‘Telescope’ handle allows changing from high pressure to high volume pumping quick and easy for both MTB and Road Bikes.

GLUELESS PATCH KIT

Emergency glueless puncture repair kit included. No glue needed, simply peel and apply and be riding in minutes. Never be caught out with a puncture again.

SUPER FIT CLEVER VALVE

Easily switch between Presta and Schrader valves using the ‘Super Fit Clever Valve’, no valve changing needed.

TELESCOPIC DESIGN

The ‘Telescopeing’ handle allows changing from high pressure to high volume pumping quick and easy.

DURABLE

Made to last with strong 6061 Aluminium Alloy to stand up to the toughest of knocks.

INNOVATION

Vibrelli engineer their products to deliver superior function, using world leading precision manufacturing.

EXPERIENCE

Vibrelli gear is created by riders for riders. The Vibrelli team use their own gear to constantly improve the products.

DURABLE

There’s nothing worse than kit that lets you down when you rely on performance, which is why Vibrelli products are field tested for durability and are built to last the distance.

COMMITTED

Vibrelli is committed to producing the highest quality products that our customers will love. Quality you can rely on.

• 【New Accurate Pressure Gauge】-  Toolitin mini bike pumps have smart barometers to show the required air pressure range for the corresponding type of bicycle.the bicycle pump can e be easily checked the precise air pressure and find the required tire pressure prevent accidental tyre burst,more safe.
• 【Fits Presta & Schrader Valve with No Leaks】- Easy switching between Presta & Schrader valves - No adapters needed! Prepare a toolitin bike air mini pump to meet the breathing needs of your bicycle. Metal threads with a few turns ensure the pump is sealed and prevent air from escaping.
• 【Two inflation modes,Reduce Pumping Time】- Oversized air cylinder enables Toolitin bike hand pump to reduce 30% inflating time compared to conventional mini bike pumps. This hand pump has 2 inflation modes that can be switched freely, the pumping speed of the low pressure mode is doubled, and the pumping of the high pressure mode is more accurate.
• 【Super Compact and Lightweight】-Hand bike pump with a shelf can be installed next to the bottle rack. It is convenient when riding a bicycle. The clip with rubber rope can make the well-made air pump stable and reliable, and will not shake or fall from the bicycle.6.69in and 3.8oz is the ultimate we can do.
• 【High-quality materials】: Our mini bicycle pump is made of anodized aluminum and durable hard plastic, which has higher strength and strong corrosion resistance. Toolitin mini pump is your best choice.

User questions & answers

Question:	Isn't there supposed to be a plastic lens over the guage
Answer:	I thought the same thing, but mine doesn’t have one either.
Question:	anybody use this for their onewheel
Answer:	This item is simply JUNK!!!!
Question:	When i try and do this for a presta valve it just pops off because it’s unscrewed? anyone know what i’m doing wrong
Answer:	I couldn’t figure it out because the item I received was defective

Product features

TOOLITIN Mini Hand Bike Pump with Gauge

Easily switch between Presta and Schrader valves using the ‘Super Fit Clever Valve’, no valve changing needed.

Oversized air cylinder enables Toolitin bike pump to reduce 30% inflating time compared to conventional mini bike pumps. High pressure up to 100 psi/6.9 bar. The accurate air pressure can be displayed when inflated, making it easier to visually see and fit easily into the proper pressure prevents accidental tire blowouts.it's small enough to place in your bag easily.

Flexible handle

Soft,easy to store

Rugged aluminum tube

TOOLITIN Mini Bike Pump with Gauge

*High quality metal texture aluminum alloy *Maximum pressure:100psi/7bar

*Weight:3.8oz

*Size:10.2in

Fits Presta & Schrader Valve

*Easy switching between Presta & Schrader valves

*Safe installation,No Leaks

*With ball needle, can inflate sports balls: basketball football or volleyball, etc. *Road bikes, mountain bikes, BMX tires

Mounting bracket for bicycle frame

*Easy installation in minutes *Lightweight design takes up little space *Super easy to install on most bikes *Now, ride with confidence and enjoy the journey!

1.Find mounting holes on the bicycle.

2.Place the frame and fix it with screws.

3.Fix the bike pump on the frame.

4.Congratulations,install successfully.

• 【Important - How To Use】①Identify the type of tire valve and use the corresponding Presta or Schrader valve according to the instruction ②Ensure the tire is rotated so that the valve is near the ground, unscrew the tire valve cap. ③ The valves are inside the pump head. Unscrew the black cap you will find them. They're nested together maybe a bit fiddly to take out. ④ Insert the pump to tire valve and lock the lever before pumping.
• 【Ultra Lightweight & Full Range Of Accessories 】It is almost weightless (only 160g) and extremely compact that can be attached to the bike frame under the water bottle cage with the mounting bracket. Accessories include Gas needle to inflate the sports balls, fixed belt and holder to attach the pump on the bike, Rubber Binding Strap to fix the tube, Glueless puncture repair kit to be prepared for a flat tire anywhere and User manual.
• 【120PSI Maximum & Fast Inflatable.】With a 120 PSI capacity, Mini Bike Pump can be used to inflate bike tires during emergency repairs or simply to maintain tire pressure over the course of a season. It's the only pump you need to take with you, but it's also the only pump you need in your garage.
• 【Multi-Uses】Comes with pocket sized Glue-Less puncture repair kit along with mounting bike attachment bracket, bike bell ,and sports needle to Inflate sports balls such as basketballs, footballs, soccer balls & more.Also ideal for mountain & road bikes, electric bicycles as well as strollers, wheelchairs.
• 【100% MONEY BACK GUARANTEE】Buy With Total Confidence. Since customer satisfaction is our top priority, we want to make sure you are completely satisfied with the product you have purchased. If you have any issues, questions, or concerns. Please contact us !【Warranty】 We provide a 45 days money back and 12-month worry-free service

User questions & answers

Question:	How accurate is the gauge
Answer:	This small bike pump consist with pressure gauge which can check the exact psi during inflation.
Question:	Does this work for Huffy bikes or any bikes
Answer:	Yes, It has a campatible valve fit for Presta and Schrader valves , No changing valves needed.
Question:	How does it work? Its different from the guide
Answer:	Yes, It has a mounting bracket, using velcro strap and fixing screws can attach the pump on bike frame.
Question:	Anybody use this for their onewheel
Answer:	Yes, it can inflate ball with ball needle.

Product features

Diyife Bike Pump Set A Good Partner of Bike!

• Be Prepared For A Flat Tire Anywhere! Fits Both Schrader & Presta The hose head can be switched between Schrader and Presta valves with no reverse or adapters.
• High Pressure 120psi Allow quick and easy pumping to 60psi for mountain bike and 120psi for road bike
• Portable Bike Pump Only 8.27 inches long and lighter than an iPhone, you could barely even feel it in your backpack.
• Flexible Hose & Secure Connection Built-in hose protects your valve stem while tightly threaded onto the valve with no leaks.
• Robust Frame Mount Kit With included mount bracket, you can easily and securely attach the pump to your bike frame underneath the bottle cage.

How to Find 2 Valves? The 2 Valves Are Inside the Pump Head!

• Pull up the gray lever on the pump head and the 2 valves inside will automatically be pushed out.
• Unscrew the black cap and then tip out the 2 pieces beneath it which may come out stuck together, or may get stuck inside requiring you gently hit the back to dislodge them.

Package Included:

• 1 x bike pump
• 1 x ball needle
• 2 x mini pry bar
• 1 x grinding tablets
• 6 x tire patches
• 1 x bike pump holder
• 1 x fixed belt
• 2 x fixing screws
• 2 x valve caps

Product description

PULIVIA pump with digital LCD display pressure gauge, it is a good choice for your bike.



Specifications:

1. Color: Black

2.Material: High-quality Aluminum Alloy

3. Size:20cm length

4. Weight:118g

5. Max Range: 210 PSI

6. Extension Hose:19cm



Package included:1 x Bike Pump

1 x Extension Hose

1 x Glueless Patch Kit just for tire repair kit

1 x Ball Needle

1 x Bike pump holder

1 x Fixed Belt

2 x Fixing Screws

2 x Pry Bar

1 x dual valve with rotating head(attached to extension hose)



Pay Attention:

When the pressure is lower than 2 PSI, the LCD display 0 PSI.

Welcome to contact us by visiting our store. If you have any question, please just contact us via amazon email, we offer 7days/24hrs Customer Service. we will do our best to satisfy you.

• 【PROFESSIONAL PRESSURE GAUGE】 --- Digital LCD Display for accurate tire pressure number, easy to read in 4 scales including PSI, BAR, KPA and KGF/CM², range up to 210 PSI. Inflate your bike/football/basketball with quickness and accuracy and also monitor your tire pressure to prevent tire blowouts.
• 【WIDE COMPATIBILITY】 --- PULIVIA bike pump has dual valve with rotating head allows to quickly and easily fits presta and schrader valves. The secure threaded valve connection provides an ultra-tight seal.
• 【DURABLE & STURDT】 --- This hand pump is aluminum alloy full body construction, rough surface silicone case protect the digital LCD Pressure gauge, not rusty and anti-fall, easy to control.
• 【PORTABLE and LIGHTWEIGHT】 --- The mini bicycle pump is at just 20cm long and 118g weight, come with frame mount. you can carry this small mini pump anywhere as you need mounting on your bike or in your sports bag.
• 【MULTIPLE USAGE】 --- This portable pump includes mounting bracket, sports ball needle, perfect for mountain bikes and road bikes, also inflating to basketball, football, swim ring. If you have any problem, please don't hesitate to contact us, we will do our best to satisfy you.

User questions & answers

Question:	Can this pump be used for basketball inflating
Answer:	It would fit but I'm not sure how well it would perform at 1700
Question:	Is it easy to pump？ inflating fast
Answer:	Not sure, I got a Honda butt it's got 1/4 inch connect. Works awesome
Question:	Can this pump be used for motorcycle tires
Answer:	I assume what you are talking about is AR142, it sounds that the washer gun is not exchangeable. If you can remove the whole washer gun, and you buy a hose with M22 connector, it should be able to use together with our Thunder Hardware 3000psi pressure washer gun. the one we are selling fitting most of power washers.
Question:	can it tell the exact psi
Answer:	Sorry, it doesn't come with a pressure washer. Thank you.

Product description

Why Choose FAHZON Mini Bicycle Tire Pump?

With max 160Psi Pressure Gauge: High pressure capacity mini foot pump with gauge.

Wide range of applications:Twin valve design,fits presta & schrader valve,free with ball needle and gas nozzle,which can be used for bicycles, motorcycles, electric cars, sports balls, balloons, inflatable dolls, swimming rings, hovercraft, etc.

Anti-slip Pedal: The concave convex design makes the bike pump more stable and easily to inflate by foot. stretch the pedal, it can be used to inflate, convenient to bring when collapsed.

High Quality Material: Long service life,strong and durable.FAHZON bike pump's inner and outer barrel is made of high-strength aluminum alloy, and the tire pump's gas tube is cold and heat resistant.

Specifications:

Stretched: 9.4 inch; Collapsed: 6.6 inch

Item Weight: 0.81lb

Package Include:

1 x Bike Pump, 1 x Sport Ball Needle, 1 x Gas Nozzle

• 160PSI pressure gauge:Judging by the pressure gauge,you can choose whether to continue to inflate,which makes the pressure of tires proper.Easy pump to 80 Psi.
• Non-slip design:The pedal of bike foot pump has a good slip resistance by serrated surface texture.It's easy to inflate your bicycle tires,spend less effort and time.
• For four seasons:It has good heat resistance and antifreeze.High-quality sealing ring and flexible tube make it can be used normally in winter and summer.
• Mini portable design:The size of a water glass and it weighs 400g.If you are going to ride a long distance,it will be a great option with the mini pump.
• Wide range of applications:Fits presta & schrader valve,free ball needle and gas needle,which can be used for bicycles, motorcycles, electric cars, sports balls, balloons, inflatable dolls, swimming rings, hovercraft, etc.

User questions & answers

Question:	Will this fit in an 3x4x8 bag
Answer:	the product size is 17.6*13.2*7cm,the bag is small
Question:	What is a 'gas needle' and why would I want this feature
Answer:	Gas needles are mainly used to inflate ball products like basketball.
Question:	Can I use it to inflate my son's bicycle
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } The answer is yes,it can be used for bicycles, motorcycles, electric cars, sports balls, balloons, inflatable dolls, swimming rings, hovercraft, etc.
Question:	can this be attached to the bike
Answer:	This pump does not come with an attachment for bikes, however it is small and lightweight. I’m sure you could figure out a way to attach this to a bike if you’re ingenuitive or you could simply carry the pump with you in a small bag.

Product features

FAHZON Bike Pump Mini Portable Bicycle Foot Pump with Pressure Gauge Bike Tire Air Pump with Gas Ball Needle for All Bike,Fits Presta & Schrader Valve

FEATURES:

With 160psi pressure gauge, mini portable, bid farewell to a flat tire.

High-quality materials, stable and durable, saving time and effort.

With Pressure Gauge

Accurately display tire pressure to ensure that the tire pressure is just right.

Freezing And Heat Resistant

High-quality sealing rings and flexible tubes make it can be used normally in winter and summer.

Pedal Steel Ring

Metal material, stored design, help stabilize the pump and portable.

Mini Portable

Easy to carry when you go out.It weighs only 402g which weighs about two mobile phones.

Locking Buckle Design

High-strength lock, not fall off and leak when inflated.

Aluminum Alloy Outer Inner Tube

High strength, no deformation. Firm, stable and long service life.

Non-slip Pedals

A good slip resistance by serrated surface texture when pumping.

Product description

You donAAAt have to guess tire pressure with the Topeak Road Morph G Mini Pump thanks to a flip-out analog gauge that reads up to 140psi. Now you can say goodbye to startling explosions or frequent stops to add more air. Lightweight and durable butted aluminum construction ensures the Morph G survives a skip across the tarmac after you drop it out of your back pocket at 30mph.



Product Features

• Material: , plastic
• Dimensions:
• Valve Type:
• Max Pressure:
• Hose Length:
• Deflate:
• Weight: 220 g
• Recommended Use: road cycling, MTB
• Manufacturer Warranty:

• Used by both professional and amateur riders alike
• Made using high quality materials and components
• Tested to ensure quality and durability
• HEAD Fits Presta/Schrader/Dunlop valves
• GAUGE In-line gauge, Reads 140 psi/9.6 bar
• HANDLE T-type dual density polymer
• ADDED FEATURES Fold-out foot pad, Flexible hose Includes centerline mount bracket (Art No. TRP-3C)

User questions & answers

Question:	Does it come with a mount that attaches to the waterbottle fittings but places the pump to the side so I can still mount a bottle cage
Answer:	It comes with ties to place it anywhere as well as screws to the waterbottle fittings. You could use the ties to place it offset of the water bottle with no issues
Question:	Where was it made
Answer:	Taiwan
Question:	what is the length
Answer:	Overall length is 13 3/4 " (35 cm)
Question:	How does the pump mount on the bike
Answer:	Pump comes with a clip-on mount that attaches to any tube on the bike with two heavy duty cable ties (included). I carry mine on the seat tube right beside the rear water bottle. It can also be screw-mounted using either of the water bottle locations. A Velcro strap provides backup for the spring clip.

Product features

ROAD MORPH G

Morph technology in a road pump. Extra long barrel gives huge performance. Includes in-line gauge for perfect inflation every time.

In-line Gauge

Reads 140 psi / 9.6 bar

T-handle

Dual density polymer

Fold-Out Foot Pad

Flexible Hose

HEAD Fits Presta / Schrader / Dunlop valves

SIZE 35 x 5.7 x 2.8 cm / 13.8” x 2.2” x 1.1”

WEIGHT 220 g / 7.74 oz

• WHAT YOU NEED: Are you tired of wasting your energy and time on hard-to-use air pumps? Do you want the pump is in your pocket when you have a flat tire? This electric bicycle pump is exactly what you need! - All the products we sold enjoy two years warranty and full life service,please feel free to contact us when you meet any problem.
• POWERFUL PRESSURE OUTPUT: This mini electric air pump has a maximum pressure of 150PSI, ensuring you can easily inflate all your cars, bicycles, motorcycle tires or other smaller items in a few seconds？It has 4 unit values - PSI, BAR, KPA, Kg/cm ² - you can set and monitor tire pressure at any time!
• RECHARGEABLE BATTERY: This air pump for bike and car tires (even for bike shock) comes with a powerful Li-Ion rechargeable battery, which can be used as a power bank for Android and IOS devices. There is a practical micro-USB and the charging time is only 2.5h, it also provides a customized bike mount.
• SAFETY COMES FIRST: If you are in an emergency, this portable air compressor for tires has got you covered! The built-in LED light can provides up to 7h of enduring lighting and 80 lumens, You will have a bright field of view in any case. There is built-in lithium battery protection board, batteries overcharge protection, overdischarge protection, short circuit protection, against undervoltage condition and temperature monitoring function.
• ERGONOMIC AND SLEEK: Featuring a portable, ergonomic design, this tire pump has been developed for your comfort in mind with a digital LCD display and a user-friendly interface . With an ultra-slim design which measures only 2.1 * 2.1 * 7 inches and weighs 336g, The grip of this pump is perfect. Just throw it in your backpack or car, then you will be covered in any emergency.

Product features

Use of CYCPLUS Intelligent Mini Air Inflator

1. Connect one end of the air tube to the inflator, connect the other end to the tire valve. (For the presta valve, please install the valve converter at first.
2. Long press the POWER Button to turn on the power. The LCD will display the current pressure.
3. Pressing the UNIT button can switch the units(PSI\BAR\KPA\kgf/cm2). (The recommended range of pressure can be found on the tire in general.)
4. The + Button and - Button are preset buttons for adjusting the target pressure. Long press them can adjust the target pressure quickly. (If skip Step4, the target pressure is the value you preset last time.)
5. Pressing the POWER Button can start inflating. Pressing it again can pause/continue. It will stop automatically when it reaches the target pressure.
6. Please quickly remove the air tube from the tire to prevent air leaks.
7. The inflator will not work when the target pressure you set is lower than the current tire pressure.

Attention: Do not turn on the air pump while it's charging.

Multi-Purpose (150PSI High pressure output)

• Car tire: 2.4BAR=34.8PSI
• Road Bike tire: 120PSI
• Basketball: 9PSI

Power Bank Design

1. Long pressing the + Button in the off state can turn on/off the power bank.
2. Power bank will be turned off automatically after 60 mins of work.
3. If turn on the power, power bank will be turned off automatically.
4. Support Android and iOS equipments.

Custom Bike Mount

1. Fix the bike mount on the bike and fasten screw.
2. Paste non-slip mat.
3. As the way shown in pic, put the the velcro into the left hole of bike mount. Please note that the rough side is facing up.
4. As the way shown in pic, put one end of the velcro into plastic buckle of other end.
5. As the way shown in pic, put the the velcro into the right hole of bike mount.
6. Put the air inflator in. Please note that the screen is facing up. Tense the velcro and fix it well.

Product description

Upon first glance, you'd think the Topeak Mountain TT Twin Turbo Mini Pump would lack serious power, seeing its ultra-compact size. However, you'd be wrong to make this assumption, as this pump features Twin Turbo Technology, which compresses a large volume of air with high pressure every time you make a pump stroke. This Twin Turbo technology means you'll be able to quickly inflate both mountain bike and road bike tires. The thumb lock keeps it secure while you're pumping up tires, so it doesn't accidentally slip off and spill air. Additionally, it works with both common Presta and Schrader valves and includes a side mount bracket for securely attaching it to your bike frame.

• Material: [barrel] aluminum, [handle] plastic
• Dimensions: 8.7 x 2 x 1.6in
• Valve Type: Presta, Schrader, Dunlop
• Max Pressure: [no gage] 120psi, [with gage] 60psi
• Claimed Weight: 6.8oz

User questions & answers

Question:	In the photos of the product there is no gauge. ¿Is it sure that it comes with one
Answer:	Yup, no problem
Question:	Does it come with Gauge? no gauge on photos
Answer:	It's a great case, very strong and strat will fit very well but it's made for charvell....

Product features

Twin Turbo

Innovative TT TwinTurbo Technology lets you pull to compress a large volume of air and push to inflate with high pressure to save 50% time and effort

Gauge

Large integrated 1-1/8” diameter easy-to-read analog gauge

Bracket

Side mount bracket

Strong

60 psi / 4 bar, 1-1/8” Analog

Aluminum

Aluminum Barrel

Inflation

Pump in use

Attached

Attached with bracket