14 best auto belays

Product description

The TRUBLUE Auto Belay is the next generation of indoor and outdoor auto belays. Designed for the climbing industry, thousands of TRUBLUEs are in use around the world in climbing gyms, ropes courses, family entertainment centers and more. The TRUBLUE Auto Belay is the next generation of indoor and outdoor auto belays. Designed for the climbing industry, thousands of TRUBLUEs are in use around the world in climbing gyms, ropes courses, family entertainment centers and more.TRUBLUE’s self-regulating magnetic braking system is superior to the technology of other auto belays on the market, both for operators and user satisfaction. Our auto belays are engineered to meet the strictest safety standards, including extensive testing by an ISO 17025 certified lab specializing in product safety testing.The primary difference between the TRUBLUE and TRUBLUE XL is in mounting height. Features Reliability with no sacrificial wear parts Smooth, consistent descent for a variety of rider weights Compact and modular unit is simple to install or relocate Accommodates wide range of weights (22-330 lbs/10-150 kg) Maximum mounting height is 41 ft (12.5 m) – no minimum requirements Minimal maintenance and low cost of ownership ($199 annual recertifications are required for all units) When purchasing your TRUBLUE Auto Belay, please select the appropriate webbing length to fit your climbing walls: 24.6 ft (7.5 m) 41 ft (12.5) Every TRUBLUE comes with a steel carabiner on the webbing line. You will need two steel locking carabiners to mount the TRUBLUE device – NOT INCLUDED. Device Dimensions: 15 in x 12.6 in x 5.5 in (380 mm x 320 mm x 140 mm) Device Weight: 42.5 lbs (19.3 kg) Maximum Descent Velocity: 6 ft/s (1.8 m/s) Maximum Descent Height: 41 ft (12.5 m)* Rated Working Capacity: 22 to 330 lbs (10 to 150 kg) Webbing Minimum Average Breaking Strength: 3,507 lbs (15.6 kN)

• Maximum Descent Velocity: 6 ft/s (1.8 m/s) No Matter The Weight / Load Of The Climber
• Accommodates wide range of weights (22-330 lbs/10-150 kg) Maximum mounting height is 41 ft (12.5 m) – no minimum requirements
• The TRUBLUE self-regulating magnetic braking system is superior to the technology of other auto belays on the market, both for operators and user satisfaction. Our auto belays are engineered to meet the strictest safety standards, including extensive testing by an ISO 17025 certified lab specializing in product safety testing.
• two steel locking carabiners to mount the TRUBLUE device – NOT INCLUDED.
• Device Dimensions: 15 in x 12.6 in x 5.5 in (380 mm x 320 mm x 140 mm) Device Weight: 42.5 lbs (19.3 kg) Maximum Descent Velocity: 6 ft/s (1.8 m/s) Maximum Descent Height: 41 ft (12.5m) Rated Working Capacity: 22 to 330 lbs (10 to 150 kg) Housing Materials: Cast aluminum and modified Acetal webbing feed-in nozzle Line Materials: 0.8 in (20.8 mm) Nylon Dyneema Webbing Warranty: 2 years

Product description

Sometimes even with the best planning, basic equipment will leave you unprotected and needing a better solution. FallTechs self-retracting devices are built for workplaces where you need greater access to distant anchors, greater mobility and short stopping distances than traditional lanyards can provide.

• Over-molded alloy steel frame provides superior durability and light weight.
• Load-indicating swivel carabiner clearly shows when a fall event has occurred indicating the device should be removed from service.
• Dyneema webbing has high strength and excellent resistance to cuts and abrasion.
• Reduces arrest forces to less than 900 lbs in overhead applications.
• Lightweight nylon and glass housing with independent steel frame.

User questions & answers

Question:	Is it the web or the wire
Answer:	Web
Question:	How many falls can it take
Answer:	Always replace any fall protection equipment after a fall. No matter the product, or who the manufacture is.
Question:	Could this be used for a large breed dog? Attached to a cable in air
Answer:	This is not its intended use, dog would choke since it automatically locks upon sudden movement: no.
Question:	Is this osho certified
Answer:	This SRL meets the following OSHA fall protection standard(s): CFR1926.502 & CFR1910.66

• NO ENTANGLEMENT & HEAVY DUTY HOUSING – Never worry about tripping or getting tangled in the KwikSafety COBRA 20 ft and 30 ft (Class B) Self Retracting Lifelines. These fall protection guardians have a 3/16” non-fraying galvanized steel cable that easily retracts into its heavy duty, protective aluminum housing, and a textured grip for easy handling. The instant locking tech and quick brake system will catch you in what feels like a nano second during the event of a fall and ease the impact.
• SWIVEL TOP, 1 SNAP HOOK, 1 TWIST LOCK CONNECTOR – The COBRA SRL line is compatible with any D-Ring harness and safety anchor strap as part of your fall protection kit! The steel snap hook is self-locking (no rollout here!) and has a gate strength of 3,600 lbs. The heavy duty, twist lock steel carabiner clip with swivel top helps with ease of work and prevents a twisting lifeline. With the help of these components, both the 20 ft and 30 ft COBRA SRL have an average arresting force of 900 lbs.
• ANSI TESTED BY 3RD PARTY (Unique to KwikSafety Products) – The COBRA SRL series (and KwikSafety’s other fall protection) is quality checked and tested by a 3rd party accredited testing lab. The COBRA is not leading edge and has a capacity of 130 – 310 lbs., compliant with ANSI/ASSE Z359.14-2014. The yellow zinc anodized steel snap hook is compliant with ANSI.Z359.12 standards. KwikSafety gets all of their products ANSI tested while majority of other safety companies do not and its buyers beware.
• OSHA COMPLIANT (Keep OSHA on Your Side) – Put the COBRA SRL on the frontlines of any project where OSHA compliance is required. Can be used for climbing on a roof or ladder, construction, roofing work, gutter cleaning, installation, steep roofs, inspection, maintenance, wind turbines, communication towers, water tanks, wells, ship yards, rigging, window washing. Used by iron & steel workers, roofers, linemen, engineers, inspectors, supervisors, technicians, industrial painter.
• FALL PROTECTION GUARDIAN – With the COBRA, you’ll want to conquer heights as tall as the peak of Malta! KwikSafety products are proudly designed & shipped from Charlotte, NC, USA. Our Charlotte-based team will quickly answer any and all of your questions and concerns about your order in English or Espanol (línea de vida autorretráctil, seguridad yoyo). KwikSafety products are premium stylish safety products designed by Americans with American Standard level of quality.

User questions & answers

Question:	How do you attach to a standing seam roof
Answer:	There is a bracket that you can buy that attaches to the peak of your roof under your ridge cap
Question:	are these units good for more than one fall
Answer:	It's not recommended for any type of retractable to be reused. Maybe the factory can reset them though?
Question:	Would this product work as a retractable dog run? Or would the locking mechanism not be able to keep up with a dog and trigger the line to stop
Answer:	Absolutely not!
Question:	Can this be used horizontally on a roof or do they need to be mounted above the worker
Answer:	Must be mounted above worker

Product description

The Malta Dynamics Hybrid Hog Self Retracting Lifelines are uniquely engineered to meet the strict requirements of ANSI Z359.14-2014 for both Class A & Class B. They are manufactured in lengths ranging from 20’-30’. The braking mechanism holds maximum average arresting forces to under 900lbs and the maximum arresting distance to under 24 inches. Made from galvanized steel and high strength thermoplastic polymer for additional strength and durability, all of Malta Dynamics Hybrid Hog SRLs are tested to the strict ANSI protocols and meet all applicable OSHA standards.

• Hybrid Dual Class-Meets both ANSI Class A and Class B requirements simultaneously ● 24″ Maximum arresting distance ● 900lb maximum average arresting force
• Meets ANSI Z359.14-2014, ANSI A10.32-12, OSHA 1926 Subpart M, OSHA 1910, 1926.502, and 1910.66
• Lightweight and Durable Housing ● Comes with Swivel Top and Bottom Connection Points ● Designed to lower impact force at impact
• RFID Chip ● Gripping Snout ● Side payout allows incredibly smooth cable payout and retraction ● Stackable design minimizes the space required for storage ● Worker Capacity Range: 130-310 lbs.
• Connector Material: Galvanized steel or aluminum ● Lifeline Material: Galvanized steel ● For overhead use only

Product description

Self braking in case of accidental loss of descent control. Sensitive handle enables smooth descent without harmful rope twisting. Also suitable for work at a height and for emergency self evacuation.



Specification:

Suitable for ropes of diameter of 9-12mm/0.35-0.47 inch

Load: 150KG/330 LB

Material: Aluminum magnesium alloy

Size (L x W): Approx. 8.27 * 2.17 inch

Color: Blue



Warm Tips:

We provide 90-day warranty !

If you have any questions, please contact us and we will reply within 24 hours.

• Material:Aluminum magnesium alloy. Size: 2.17"(W) * 8.27"(L), Net Weight: 1.04 lb.
• CE Certification, EN 341. Max Load:150 kg/330 lb. Suitable for 9-12mm/0.35-0.47 inch dia.
• Easy to Install:Device can be rapidly installed or removed from the rope without disconnecting it from the harness.
• Design makes it good for descending tight passages,suitable for teach use.Self-breaking function allows you to easily stop and hold your position on rope.
• Suitable for rock climbing, mountaineering, exploring, rappelling, rescue, engineering protection, aerial work etc.

User questions & answers

Question:	Can you Ascend Freely? Also will it stop you from falling
Answer:	It will not ascend with a 12mm rope. It has an anti panic cam that, unfortunately, locks in when you try to ascend. It descends wonderfully, will not ascend on larger rope....if any. Also, it DOES stop completely, with no creep. And I am 225+ gear.
Question:	Can it be used in gear for fire fighters, will iy withstand some heat
Answer:	Generally speaking, keeping away from fire is more important! We tested it on 80ft drop at speed of 1ft / s for 3 times, Observed maximum temperature increase was 58deg Fahrenheit, 69F outside temp, 127F the descender temp. From the results, the faster the decline, the higher the temperature. I found nylon and polyester ropes have a melting point about 450F on the technical website, Some information Tom Jones sent stated the maximum usable temperature should be 194F Conclusion: From the data, it seems unlikely Descender can generate enough heat to damage the rope when stopped if the melting point is used but we shouldn't follow this. Using the limit Tom provided on a hot day (100+ F) it probably possible to reach the limit, but you'd have been going very fast. At the same time we do not approve of dropping more than 330ft uninterruptedly Repeat once more: keep the rope away from the fire!
Question:	Is there a weight limit to this
Answer:	Yes, the max weight limit is 900 pounds.
Question:	Can’t seem to figure out how to tighten up the slack in the rope. It wants to lock up every time I try to pull on it
Answer:	This device is not designed to be used as an ascent device. It’s just as hard to pull in slack as it is for the line to run out when descending.

Product description

Designed with an ergonomic frame to make handling more comfortable for the user; product is lightweight (weighing under 4 pounds) and composed of a durable aluminum housing; offers dependable performance with its quick-action braking system; meets or exceeds all applicable industry standards including OSHA and ANSI; no recertification is required with this product as it is considered a disposable unit; manufactured in the Taiwan.

From the Manufacturer

The Guardian Fall Protection "Web Retractable Lifeline" was designed with an ergonomic frame to make handling more comfortable for the user. The product is also lightweight (weighing under 4 pounds) and composed of a durable aluminum housing. This lifeline offers dependable performance with its quick-action braking system. The product meets or exceeds all applicable industry standards including OSHA and ANSI. No recertification is required with this product as it is considered a disposable unit. Manufactured in the Taiwan.

• Dependable performance. Worker Capacity Range: 130-310 pounds
• No recertification required, considered a disposable unit
• Meets or exceeds all applicable industry standards including OSHA and ANSI
• 11 feet of 1-Inch nylon web

User questions & answers

Question:	How does this work? Does it latch or does it slow your decent? Does it only engage when pulled quickly? Is there something to absorb shock
Answer:	It only stops you when pulled quickly. It comes with nothing to absorb shock. It works exactly like a seat belt.
Question:	Is this designed for horizontal use? or it has to be anchored overhead
Answer:	In Fall Arrest applications, anchorage connection point must always be at or above harness dorsal D-ring. You can work horizontally, but the anchor point needs to be above your back D-Ring. Note this is a relatively short SRL compared 30 ft to 100 ft SRL's that swing falls are more common, but you must always account for. Prior to installation or use, make considerations for eliminating or minimizing all swing fall hazards. Swing falls occur when the anchor is not directly above the location where a fall occurs. Always work as close to in line with the anchor point as possible.
Question:	is this shock absorbing
Answer:	The breaking mechanism inside the housing of the unit acts as a shock absorber to limit the arresting force. It also has a shock absorbing pack above the snap hook attached to the webbing. The shock pack will not even deploy 9 times out of 10, but it's there as kind of a back up safety valve, where if your webbing gets snagged on something the shock pack will deploy and arrest the fall forces. I'm fairly certain the extra shock pack is also there for users over 310 lbs., because these units are rated at 310 lbs, but clearly states may be used for up to 420 lb person if used with a harness & other components rated the same. So, yes, it actually has two, but the breaking mechanism inside the housing is going to be the energy absorber that will arrest a fall in the vast majority of any accidents. FYI: These work kinda of like a seat belt, when a fall occurs the lanyard stops usually with 15 inches, even though it has a higher maximum fall arresting distance, which you do have to account for, even if the SRL catches you with 15 inches or less most of the time.
Question:	Would this work for a rock wall
Answer:	Not if you're going to be using it for rock climbing. It is not an auto-belay device

Product features

Halo Web SRL

Guardian Fall Protection Halo Web SRL is ideally engineered nylon webbing to assist the industrial workers. It is specifically designed to protect the workers from sudden free fall.

This polyester webbing comes with incorporated shock absorber that allows it to withstand hard falls from a height. The galvanized carabiner of this self-retracting lifeline system reduces the chances of any accidental situations.

Easy Installation

Personal Fall Arrest

Halo Web SRL may be used in Personal Fall Arrest applications as a component of a MAXIMUM 1 Personal Fall Arrest System (PFAS).

• Structure must withstand loads applied in the directions permitted by the system of at least 5,000 lbs.
• SRL must always be positioned at or above harness dorsal D-ring AND at or below anchor point
• Applicable D-ring: Dorsal

Restraint

It helps in preventing workers from reaching of a fall hazard.

• No free fall is permitted
• Structure must withstand loads of at least 1,000 lbs.
• May only be used on surfaces with slopes up to 4/12 (vertical/horizontal)
• Applicable D-rings: Dorsal, Chest, Side, Shoulder

Swing Falls

Before installing Self Retracting lifelines in swing falls, make sure to eliminate/minimize all possible hazards.

• For all applications: worker weight capacity range (including all tools, and equipment) is 130-310 lbs.
• Account for a minimum 3in. safety factor, deceleration distance, user height, length of lanyard/SRL, harness stretch, and all other applicable factors

Worker Classification

This SRL must be inspected prior to each use by the end user, and at least every six months by a Competent Person.

• A person with an accredited degree or certification, and with extensive experience
• A highly trained and experienced person who is proficient in identifying existing and predictable fall hazards, and who has the authority to stop work in order to eliminate hazards

About Guardian Fall Protection

Privately owned and locally operated since its founding in 1993, Guardian has since been the top manufacturer and provider of safety products for America’s construction workers. Guardian is headquartered in Kent, WA, with offices and warehouses located throughout the United States. Supported by its hardworking employees and strong distributor partnerships, Guardian is constantly striving to enhance the safety and productivity of its customers.

• Belay device with assisted braking, for a broad range of single rope diameters (8.5 to 11 mm), designed for the experienced belayer
• Belay device with assisted braking, compatible with a broad range of single rope diameters, for both gym and crag
• Exceptional comfort during descents
• Designed for experienced belayers

User questions & answers

Question:	Does the door open on its own
Answer:	When climbed into the belay carabiner, no.
Question:	How much force does it take to break this device? Also, what's the weight limit for the wearer
Answer:	I’ve never heard of one breaking. Will hold any human weight plus dynamic forces when lead climbing.
Question:	Is this the most recent gri gri? it says 2019. is that correct
Answer:	Hello! Yes, this is the most recent Grigri, released new for 2019.
Question:	Hi, is it the new 2019 d014ba01 grigri ? or the old one ? thanks a lot
Answer:	Hello! If you are purchasing from WesSpur Tree Equipment, this is the new 2019 model put out by Petzl, which would be part #D014BA01. If you have any other questions, don't hesitate to ask.

• Intelligent hybrid design: body made of ultra-light aluminum, areas susceptible to abrasion made of robust stainless steel
• Guide mode: simple and rapid abseiling and bringing up seconds plus comfortable belaying from a station as a doubled rope
• Assisted braking guide mode: brake boost for catching falls in leader mode
• Rope can be paid out faster in assisted braking guide mode by holding the device in the open position with the thumb
• Additional eyelet for simply unlocking the device in second mode using a carabiner

Product features

Giga Jul

The Giga Jul is particularly light and simultaneously robust and abrasion resistant. This is made possible by a smart hybrid construction of aluminum and steel. The main body of the Giga Jul is made from particularly light aluminum. Parts which are at risk of wear (for example the friction channels) are made from robust stainless steel. Another chapter in our Steel Story.

By moving the green slider, the Giga Jul is instantly transformed from an assisted braking tuber to a standard tuber.

Abrasion Resistant

Guide Mode

Assisted Braking Guide Mode

EN 15151-2 Certification

Product description

GRIGRI + is an assisted braking device designed for all climbers, for both indoor and outdoor climbing. It can be used with all single ropes (optimized for 8.9 to 10.5 mm diameter ropes) and is suited for intensive use. The reduction handle offers exceptional descent control. Two usage modes to choose from, depending on need: top-rope belay or lead belay. The top-rope belay mode and the anti-panic handle make for a more comfortable belay, making the GRIGRI + particularly suitable for learning.

• FOR ALL CLIMBERS: The GRIGRI + is a belay device with assisted braking for indoors and outdoors. Designed for all climbers.
• ROPE COMPATIBILITY: Can be used on all single ropes (8.5 to 11 mm in diameter) and optimized for 8.9 to 10.5 mm diameters.
• LIGHTWEIGHT AND LONG-LASTING: Great durability for intensive use, thanks to the stainless steel wear plate. Weighs only 200 grams.
• DON'T PANIC: Features an anti-panic handle. If the user pulls too hard on the handle the anti-panic function brakes and stops the descent.
• CHOOSE YOUR BELAY MODE: Top-rope or lead, thanks to the selection knob. The top-rope belay mode facilitates taking up slack and makes for a more comfortable belay.

Product description

Steel Snap Hook Swiveling Anchorage And Anchorage Carabiner Lifeline Rebel Self-Retracting 11'X1" Single-Leg Polyester Web With

From the Manufacturer

For more than 70 years, we have earned the trust of companies and people around the world by putting all our energy and all our expertise into achieving our mission: Dedicated to bringing every worker at height home safely.

• Fall Protection
• Manufacturer: 3M
• Made in: United States

User questions & answers

Question:	is this suitable for leading edge
Answer:	No
Question:	Can this use on the horizontal, for roof work
Answer:	I believe so, with the correct horizontal hookup equipment.
Question:	come with certificate? i need the certificate to work some customer
Answer:	Sorry, I don't. They are brand new though, just out of box.
Question:	Is this osha fall arrest certified
Answer:	Yes

Product features

3M Protecta Rebel Self Retracting Lifeline #3100425

Rebel self retracting lifelines (SRL) with super-tough yet lightweight composite housings are built to last providing an economical fall protection solution without compromising performance or safety. These Rebel SRL’s feature a 310 pound (141 kg) user capacity, and a robust design to ensure longevity. Rebel is designed with the worker in mind, featuring a stackable space-maximizing design, high strength web lifeline and a built-in swiveling anchorage point. An SRL’s lifeline will extend as the user moves away, and retract automatically enabling the user to move about within a recommended working area at normal speeds. Should a fall occur, a speed sensing brake system will activate stopping the fall and reducing the forces imposed on the user to safe levels.

Swiveling anchorage loop and carabiner

Limits lifeline twisting for smoother operation and added worker satisfaction, and the included carabiner provides a means to attach the SRL to an anchorage device.

Self-locking snap hook on lifeline

Automatically locks and closes for added safety, and its rugged construction is built to last.

Tough and impact resistant stackable thermoplastic housing

Compact and durable housing is designed to withstand the demands of challenging jobsites, it's built to last. Unique design allows stacking on work surfaces optimizing storage.

High capacity external energy absorber and impact indicator

Specialized built-in external absorption system maintains safe fall arrest forces for users and tools up to 310 lbs. (141 kg) and provides a visual alert that the SRL has been involved in a fall.

11 ft. (3.3m) 1" (2.5cm) polyester web lifeline

The high strength synthetic lifeline reduces overall weight and the retractable design provides freedom of movement, keeps the lifeline out of the worker's way and reduces dragging, snagging and trip falls.

Compact, lightweight design

Small size and shape make this device easy to use, relocate, store and can be easily used as a lanyard replacement.

Quick activating speed sensing brake system

Stops a falling worker within inches, providing more protection at low heights. Designed for smooth consistent operation allowing the user to maintain normal work pace and not be interrupted with constant lock ups.

Several configurations available

Single and twin-leg models are available to suit various applications for jobsite versatility and flexibility.

Product description

Geelife Professional The Full Metal Ascender Fall Arrester Climbing Auto Self Belay Device Climbing Gear

Meterial: Hot forged magnesium alloy

Dimensions(L x W): Approx 7.8*7.5cm

The Weight Limited: 100kg

Weight: 90g

It had got CE 1019 Certified

Color: As the picture shown

Application: Climbing,rock climbing,rappelling,exploring,rescue, engineering protection, aerial work

Attention: It is necessary to receive adequate training (knowledge of techniques and security measures) before using the tools. Incorrect use or improper maintenance could lead to serious accidents even fatal. Please read carefully or learn enough knowledge before use

Hope you can understand

• Hot forging magnesium alloy material with high strength,light weight,easy to carry. The security of testing and certification is more secure.
• The connection hole of the rope grip is bi-directional and is connected to the lock to protect the body.Suitable for 8-13mm diameter rope
• The barrier sheets can stuck the rope automatically.When human body weightlessness tilt will play the effect of grasping rope and stop falling
• Dimensions(L x W):Approx 7.8*7.5cm,The Weight Limited : 100kg. Weight: 90g
• Essential equipment for rock climbing, stopping fall.Application: Downhill Protection, Caving, Upwards Climbing Expand Protection, Rock cilmbing, exploring, rescue, engineering protection, aerial work and etc.

User questions & answers

Question:	Is this a gri gri or can it be used as one
Answer:	No
Question:	any video's of this working as a rappel device
Answer:	No
Question:	What is the kn for this
Answer:	I'm sorry I didn't mention it in the details. its vertical breaking load: 22kN (2243 kgf/5000 lbf), I hope you find this helpful.
Question:	Where are instructions for geelife the lightest rock climbing ascender fall arrest protection belay device blue self-locking rope gri
Answer:	On it in the picture

Product description

The lightweight Black Diamond ATC Pilot represents an advance in technology for the world of assisted braking devices. Providing an added level of security to your belay, the ATC Pilot threads similarly to other tubular belay devices and accommodates ropes from 8.7-10.5mm. The durable steel braking surface has no moving parts, and the smooth and secure control allows for gradual lowering. With an easy rope payout, the ATC Pilot makes single-pitch projecting burns less tiring for the belayer and more secure for the climber.

• Synthetic
• Black Diamond Equipment: Designing and constructing the world's best climbing, skiing & mountain gear since 1957

User questions & answers

Question:	Does this come with a carabiner
Answer:	Hi there. No, this does not come with a carabiner. If you have any questions please feel free to reach out. All the best!
Question:	does it require a certain carabiner
Answer:	Yes, it requires a "pear-shaped" HMS locking carabiner. With the bigger end of the carabineer clipped into the pilot and the smaller end on your harness. Need the bigger end of the pear shape so the pilot can freely slide.
Question:	Is 8 mm to small to use
Answer:	I haven't had any issues with smaller ropes. The smaller the rope the less friction the auto locking function will have but it still works.
Question:	which carabiners with triple lock mecanism is compatible with the atc pilot? tks
Answer:	I bought the Mad Rock Hulk HMS Triple Locking Carabiner and it works great! I think any carabiner that has a big gate opening (20 something mm or more) is gonna work awesome.

Product description

Now 30% lighter than the original thanks to an updated construction and machined windows through the body, the Black Diamond ATC-XP is a durable, versatile belay device that features multiple friction modes to handle nearly any situation or rope diameter.

• Black Diamond Equipment: Designing and constructing the world's best climbing, skiing & mountain gear since 1957

User questions & answers

Question:	What is the point of two rope slots
Answer:	Double roping. But also a spare when one side gets worn smooth (mine is almost completely smooth, after 3 years of hard use). But mainly for double-rope technique (highly recommended). This is a great ATC, but I will buy the "Guide" model, with its extra ring, next time, for remote belay technique (especially useful for ice).
Question:	Will this work with oplux
Answer:	The specs say it goes down to 7.7 mm, so it "should" work on 8 mm Oplux. Depends on what you are doing though. IMO, single rope belay or rappel on that thin a rope would be too hard to control.
Question:	What's the loop made of is it cable or aluminum
Answer:	Cable
Question:	Does this come with a carabineer
Answer:	No it does not come with a carabiner. If you need a carabiner then the Black Diamond Big Air XP package is what you want.

Product description

Designed for experienced climbers, the GRIGRI 2 belay device with assisted braking is designed to facilitate belay maneuvers. Both compact and lightweight, it is used with dynamic single 9.4 to 10.3 mm diameter ropes (possible with 8.9 mm to 11 mm diameters). The assisted braking improves belay comfort when working a route and when arresting a fall.

• DURABLE MATERIAL: The GRIGRI 2 is made of aluminum side plates, stainless steel cam and friction plate, and a reinforced nylon handle.
• ROPE COMPATIBILITY: Optimally used on all 9.4 to 10.3 mm dynamic single ropes (possible for 8.9 mm to 11 mm ropes).
• EASY TO USE: The GRIGRI 2 uses the same hand motions as with classic belay systems: both hands on the rope. A fall is stopped by tightening the hand on the free end of the rope.
• LIGHTWEIGHT AND COMPACT: New progressive descent control system the GRIGRI 2 is 20% lighter and 25% smaller.
• ASSISTED BRAKING: One hand holds the rope and the other uses the handle to unlock the cam. The patented handle design allows a very gradual release of the rope.

User questions & answers

Question:	How do you get the plastic piece off when you first get it
Answer:	The plastic piece occupying the clip-in hole is made of 2 pieces, one on either side. One side either unscrews from the other, or it pops out when you pull them apart.
Question:	What is the rating on this device? safe working load, or maximum breaking strength or even in terms of kn before slipping
Answer:	I weigh 185 it's held me so far
Question:	Does this function like a grillion positioner or what, I need a tower hands advice on this
Answer:	Tower hand here. They are similar but not the same. If you are looking for a positioning device go with the Grillion. Positioning devices should be Z-359, which the latest model Grillion is, ANSI is also recognizing the older models.
Question:	what makes this the old model
Answer:	Certain models have been recalled due to safety concerns. Go to the Petzl home page to learn more, but here are the recalled devices-Concerns all GRIGRI 2's (D14 2O, D14 2G, D14 2B ) with the first five digits of the serial number between 10326 and 11136.