12 best tire mount bike racks

Product description

Deluxe 2-Bike Spare Tire Mounted Carrier

• Patented design carries bikes up high, away from road and hot exhaust
• 15 inches Long carry arms easily accommodate 2 bicycles (up to 70 pounds)
• Fits nearly all externally mounted spare tires, including those with over the tire third brake Lights
• Patented individual tie down cradles secure and protect bicycles
• Extra wide bottom foot supports weight on the rear tire not on the rim
• Allen's warranty does not cover items purchased through third-party sellers
• IMPORTANT, PLEASE CONSULT MANUFACTURER WEB PAGE FOR SPECIFIC VEHICLE FIT

User questions & answers

Question:	Can this be used on toyota fj cruiser
Answer:	Bought this for my FJ cruiser. It fit and seemed to be securely on it. But the whole thing popped off the car while on the road, even with an additional lock on it. (It also covers the reverse sensor so the FJ alarm will trigger whenever backing up.) If you end up buying this, look at the flimsy clips that are suppose to hold onto the bottom of the back door. Even with the door closed, the FJ's doorframe will not help keep those little clips in place.
Question:	Does it fit on 2016 jeep wrangler
Answer:	It fits on the stock spare tire and at least up to a 33". I haven't tried it on a 35".
Question:	Would this work well on the back of a Jeep Wrangler
Answer:	Yes it works on Jeep Wranglers. I have a 2015 Jeep Wrangler, only thing I did different was instead of attaching the straps to the bumper I adjusted the bike rack to fit just to the spare tire in order to be able open the back.
Question:	What if it has a covered spare tire on the back? I own a 2006 Toyota Rav
Answer:	I have a thin cover on my tire, an elastic band one and it fit right over it with no problem. I have a 2005 Jeep Wrangler..

Product features

Safe, Rugged, And Easy To Use

The Allen Sports Deluxe Two Bike Spare Tire Carrier fits most rear mounted spare tires (make sure to confirm specific vehicle fit above). Its unique design sets up quickly and will safely transport your bicycles around town or cross country. A metal frame and two lower 'Sure Straps' deliver exceptional stability on your vehicle. The tie-down system individually secures and protects your bicycles.

Important Fit Note! This Rack Will Not Fit The New 2018 Wrangler Jl Model

Please note that this rack should not be used on any type of a trailer.

Open Frame Design

Allen Sports spare tire racks incorporate an innovative design on the upper feet which allow them to install securely on most rear mounted spare tires.

Individual tie-down system

Allen's individual tie-down system secures and protects your bicycles. The tie-downs are fixed in position on the carry arm, but rotate so that the can engage a wide range of bicycle frame sizes and styles.

Narrow Set Carry Arms for Easy Bike Loading

The 302DN's carry arms will accommodate a wide range of bicycle frame styles and sizes. Most traditional adult size bicycles, as well as most women's and children's frames can be quickly installed onto the rack.

Wide Profile Bottom Foot

The wide profile lower foot on the 302DN supports the weight of the rack and bicycle on the tire, not the rim of the rear mounted spare tire. The innovative design on the rack will fit most oversized spare tires.

About Allen Sports

Dick Allen (pictured left in 1972) started Allen Sports in his garage in 1967. Since its founding, the company has been committed to producing the highest-quality, easiest-to-use bike racks and bicycle related products on the market. Dick, a onetime aerospace engineer, opened Allen Sports after building a prototype bike carrier in his Lincoln, Massachusetts shop in his free time. The first ever trunk-mounted bicycle carrier--made of electrical conduit, metal strapping, and fire hose casings (for padding)-- was thoroughly tested on weekend excursions to Cape Cod. Shortly afterward, Allen took his design to market, and by 1971 had established a national presence for his product.

Today, the family owned company owns more than three dozen patents, operates four warehouses nationally, six factories abroad, and sells products in countries around the world including USA, Mexico, Canada, and China.

• 🚗 Ultra Durable Construction: This spare tire rack is constructed with premium heavy-duty iron with powder coating and ultra durable rubber straps to withstand the wear and tear of daily use.
• 🚗Universal Fitment: This tire rack is engineered to accommodate most spare tires and bikes, including oversized or undersized ones, and its universal mounting plate is compatible with most spare tire mounting base (except for JL 2018-2020).
• 🚗Anti-Sway Design: Your bikes will be kept safe, secure and scratch-free and there is no wobbling or moving even if you are driving in a bumpy road thanks to the built-in anti-theft construction of the spare tire bike rack.
• 🚗 Anti-Theft Protection: The built-in anti-theft lock of this spare tire mount features ultra touch construction, which can effectively prevent your tire rack from being stolen when you are away from the car.
• 🚗 2 Bike Capacity: This tire rack is engineered to accommodate 2 bikes at a time, a bonus for cycling enthusiasts and could effectively prevent bikes from colliding with each other.

User questions & answers

Question:	Are there longer straps I can purchase for this bike rack? The ones it came with won’t go around my bike frame
Answer:	Dear Customer, Sorry to hear that as the straps included are suitable for most bikes. We have included spare straps in the package but there is no longer straps available. Thanks for your inquiry.
Question:	What is the biggest tire this will fit? I have 35” for a spare tire
Answer:	I don’t think the tire size matters. It connects to the Jeep using a bolt thru center of the spare. We had to purchase our own bolt as the two sizes of connectors provided would not pull the rubber braces onto our tire. Now that it’s all hooked up I’m surprised by its durability. Bikes don’t wiggle about like on our hitch bike rack.
Question:	I purchased this item, and it didnt come with instructions to install. Is there a website that i can download them from
Answer:	Dear Customer, Yes digital instruction is available. Please contact us for it directly through amazon message. Thanks for your inquiry.
Question:	Will this fit if you have the rear camera on your Jeep spare tire? Some racks will not work if you have the camera
Answer:	Nope. You’ve got to feed part of the rack through the center of the tire. I just got a 2020 Jeep and can’t use this rack anymore.

Product description

Installs securely over the vehicle's spare tire.Fully adjustable to fit most spare tires, the SR1 Bolt-On rack's support arms can be centered for side mounted tires and folded when not in use.

• Fully adjustable to fit most spare tires, the SR1 spare tire rack's support arms can be centered for side mounted tires and folded when not in use
• Comes fully pre assembled; quick installation as the rack fits over most spare tires; Max Spare tire width: 12"; larger tire kit available from manufacturer
• Does not require removal of spare tire or backup camera (Jeep Wranglers)
• Max Capacity: 35lbs per bike. Do not use with E-Bikes
• Kids bikes, ladies frame bikes and some mountain bikes may require a top tube adapter to fit on the rack

User questions & answers

Question:	Would this fit on the hummer h3 tire in the back if the hummer
Answer:	Yes, it would fit but you would also probably need our XL Tire Kit. The XL Tire Kit is $10.00 and free shipping in the U.S.
Question:	I have a 32 inch tall spare approximately 12 to 14 inches wide on a Jeep Wrangler. Do you think the rack will fit
Answer:	I think my 2013 stock tire is 32 x 10. If you have over sized tires, it likely won't fit.
Question:	Is this rack secured to the tire or the vehicle so it can't be stolen
Answer:	It is mounted to the tire. There is no locking mechanism. If you wanted to secure the bike, you would have to use a cable and a lock.
Question:	DOES IT FIT 2002 JEEP WRANGLER
Answer:	This rack is not dependent to year of vehicle. It mounts to the spare tire itself works very well

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

The XC Cross-Country 2-Bike Hitch Mount Rack from Swagman is a versatile hitch-mount rack that can easily accommodate children's and adult bikes, downhill bikes, cruiser bikes, full-suspension bikes, BMX bikes, "Y" frame designs, and much more (and without the hassle of removing wheels). The XC slides into a two-inch receiver and carries up to two bikes.

Swagman's XC Cross-Country 2-Bike Rack easily adjusts to accommodate a wide variety of bike frames.

The XC easily adjusts to different bike frame sizes with the simple movement of the wheel hoops. Its frame grip arms feature a soft, frame-friendly coating to protect your bike's finish. When not in use, the rack folds up for easy storage.

Specifications:

• Capacity: Two bikes
• Mount: 2-inch hitch
• Hitch: Fits Class 3 hitch

• EASY TO ASSEMBLE & USE: Only takes a few minutes to assemble and the upright ratchet arms easily adjusts to different bike frame sizes, will accommodate bike frames up to 59 cm (23.2")
• KEEPS YOUR BIKE STABLE: Sturdy design includes a built in anti-wobble hitch device to keep bikes in place
• SAVES YOU STORAGE SPACE: Rack folds easily in to compact mode so that you can conveniently store when done using it
• VERSATILE: Easily transports up to 2 bikes and is compatible with 1-1/4" and 2" receiver Hitch. Maximum weight capacity is 35Ibs per bike and fits 20" to 29" tire sizes
• ACCESSORIES SOLD SEPARATELY: Fat tire wheel trays (64674), 1/2" Locking Hitch Pin (64029) or 1/2" Locking Hitch Pin and Security Cable (64031)

User questions & answers

Question:	Do I need to buy a torque wrench to be able to get the rack tight on the hitch
Answer:	Fits any vehicle with a 2 inch hitch
Question:	we have a 5th wheel camper with a 2" receiver hitch mounted on the frame not the bumper. Will this rack work for us
Answer:	Could you please measure the length between the round tube interface and the end of the spare tire？This part of our carrier is 8inch. If longer than 8inch, it’s necessary to install a extender. And our carrier can fit 2" hitch receiver (tow bar). If you have any other needs, please visit the IKURAM web site and contact us. I will send picture to help you solve your problem.
Question:	Does it have a locking mechanism
Answer:	As long as it has a 2 inch receiver
Question:	I have a Toyota where the spare is mounted on the back. Will this work with the spare tire in place
Answer:	I'm going to answer this as Best I can without getting Angry . First off - The Bike Rack has a 2 Inch Mount and your going to try and plug it in to a 1 1/2 " Receiver . Think about that for a moment ..... It's a NO

Product features

XC2

This bike carrier provides a stress-free way to transport your bikes. Each bike is secured at both wheels and at the frame providing a more stable and safe ride. Cushioned hooks are adjustable for different sized bikes and ratchet down for a tight fit.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride!

• [ QUICK RELEASE TILT DESIGN ] - Quick release handle easy to operate. Smart Tilting construction used to fold up and down rack more easily than hitch pin when carrying bikes.
• [ FOLDABLE AND TILT BACK DESIGN ] - The tilt backward design enables users to open the rear gates without detaching the hitch rack. User can fold up the rack when not in use. Smart idea to save space!
• [ BIKE COMPATIBILITY ] - Easily transports up to 2 bikes and is compatible with 2" hitch receiver. Fits most frame sizes, shapes and style including Fat Tire and Electric Bikes . Bikes with low Y-frame may require the use of an Bike Frame Adapter for better support .Maximum capacity of 60Ibs per bike
• [ ANTI-WOBBLE SYSTEM ] - No-wobble bolt is designed to eliminate movement of rack inside of hitch.And the rack also suit for 5/8" normal pin or locking hitch pin,if you don’t want to use No-wobble bolt.
• [ EXTRA GIFT FOR YOUR SAFETY ] - Extra safety reflector and tie down strap including. Safety reflector to ensuring the night driving safety. And highly recommended to use safety strap to secure bikes more safely.

User questions & answers

Question:	How well does the "anti wobble" work? at the hitch receivers tend to wiggle alot. i need it to be very firm
Answer:	There's a metal insert that slides inside the hitch, which then slides into the hitch receiver. This insert has a nut welded inside of it that aligns with the hitch pin hole. They provide you with a threaded hitch pin that screws into that nut, which pinches the hitch against one side of the receiver when tightened.
Question:	Will this fit on a Lexus NX
Answer:	Hi dear, This bike rack is suitable for any car with 2 "hitch receiver
Question:	Will this fit rad rover e bike fat tire
Answer:	Yes I have a similar fat tire ebike Sondors XS and it fits fine. Make sure to protect your top tube from the upper rack hook bar.
Question:	Will this rack work with a 4” fat tire e bike
Answer:	Yes. The “tire cradles” are very wide.

Product features

Unique And Effective

Adjustments using quick hitch pins to fit different size bike frame.

Adjustable wheel hoops

are adjustable at each end to fit length of bikes

Stability

Adjustable rubber straps on bike cradle to provide stability and added safety

Designed For Convenience

Easy-to-use knobs are included for quick adjustments of bike cradle to ensure proper fitment of bikes

NOTE

The longest distance about12.5 inch between the tube's hole center(or the hole center of receiver) and the top of the basket when folded.

Please measure the distance to make sure have clearance ability for folded up cargo carrier to accommodate a spare tire on the cars.

Fold Up Design

User can fold up the rack when not in use. Smart idea to save space.

Your best choice

This bike carrier provides a stress-free way to transport your bikes

Easy access to trunk

Tilting down feature allows easy access to trunk

• Keeps your bikes sturdy and safe with a patented Anti-Wobble System
• Quick Release Tilt Design makes it easy to access rear cargo and fold up the bike rack when not in use
• Supports 2 bikes up to 60 lbs each using durable powder coated steel tubing and keeps them secure with padded clamps and locking knob and hitch pin; Rear reflector adds enhanced visibility
• Easy to install and adjust; Most parts come pre-assembled; Heavy duty 5” wide trays are adjustable to fit most e-bikes, fat tire, road and mountain bikes, and more; Low Y-frame bikes may require support of an KAC Overdrive Bike Frame Adapter; For 2” hitches only (not recommended to use a 1 ¼” - 2” hitch adapter)
• Limited Lifetime Warranty covers a wide variety of mishaps and performance guarantees; RV or 5th wheel use is prohibited

User questions & answers

Question:	Can this be tilted with the bikes loaded
Answer:	I purchased the 4 bike version and even by itself, it is extremely heavy. It is made out of steel and not aluminum. If the bikes were loaded and you trigger the tilt, it would be very difficult to raise back up. I would not recommend tilting the 4 bike version fully loaded. I presume the two bike version is lighter of its own accord and then it is the weight of the bikes...
Question:	how wide is the rack? it looks like it sticks out past the edges of the car and cant be folded when not in use
Answer:	My rack measures 70 inches for my bike length. The wheel frames cannot be folded up. The rack can be shortened to 56 inches when not in use by sliding the wheel frames in.
Question:	Will regular road bikes with narrower tires work on this rack
Answer:	Of course this is a great rack. I personally have a ebike and a mountain bike that both have 2.5 inch wide tires but I've hauled a friends road bike and there's no movement or bouncing. To whom it may concern this is a yes or no question. Might or might not doesn't work for this question. If you haven't hauled a road bike then please don't guess.
Question:	Will this car bike rack rust
Answer:	I have no idea, but you can buy a Hiroumer bike cover which will protect your bike and your car bike rack well.

Product features

KAC Overdrive Sports K2

This tow hitch mounted bike rack for car, truck, or SUV features adjustable padded hook arms and heavy duty tire cradles to securely carry a wide range of bicycles including road bikes, mountain bikes, gravel bikes, fat bikes, and electric bikes. Not rated for RV or 5th Wheel

Durable Powder Coated Steel

Quick Release Tilting Lever

Patented Anti-Wobble System

Locking Hitch Pin

Rear Reflector

Safety First Features | Safety Strap, Patented Anti-Wobble, Rear Reflector

You wouldn't hit the trail without your helmet, so look for the same level of protection in your bike rack. With included Safety Strap, it is simple to secure your bikes to the KAC Overdrive Sports K2 2” Hitch Mounted Rack. One strap secures both bikes. Keep your bikes sturdy and safe on the road with a patented Anti-Wobble System that eliminates slack between the receiver and the rack. A rear reflector adds enhanced visibility at night.

Easy Rear Cargo Access | Quick Release Tilting Lever, Collapsible Center Post

Our innovative Quick Release Smart Tilt feature allows the entire rack to be dropped away from the vehicle for rear cargo access, even while bikes are loaded. When bikes are unloaded, the center post and hook arms can be folded down flat with the push of a button for quick and easy access to the vehicle back hatch.

Space Saving Hitch Rack | Folds Up Flat When Not In Use

The entire bike rack can be folded up flat behind the vehicle to save space when not in use. This compact folding design is convenient for garage parking and for avoiding the added effort to remove the rack between uses.

The Details

Adjustable Universal Narrow and Fat Tire Trays

Rugged 5” wide steel trays fit most narrow and fat tires. The knob adjusted sliding wheel holders accommodate an axle to axle wheelbase up to 54", making this an ideal carrier for most standard bikes, e-bikes, mountain bikes, and more.

Adjustable Padded Hooks Provide Secure Hold While Protecting Bike Frame

The padded hooks slide down over the bike frame for a sturdy hold, while protecting from scratches and scuffs. Step-thru bikes and low y-frame bikes may require use of a KAC Overdrive Bike Frame Bar Adapter (sold separately).

Lock And Key Features For Added Security

Use the provided key to lock the top arm adjustment knob, securing your bikes in place. Once the knob is locked, it will spin freely to prevent further adjustment until it is unlocked again with the key. Spare key included.

Locking Hitch Pin Protects The Bike Rack

Insert the included locking hitch pin from the right side to engage the patented anti-wobble system. Rest assured the bike rack is safe and secure with a wobble-free, locked down design. Spare key included.

Product description

The Capstone Hitch Mount 2 Bike Carrier is designed to safely and easily transport 2 bicycles with tires as narrow as 23mm Road all the way up to 5 inch fat bike tires. This well designed bike carrier features easy to fold trays and a swing away feature for convenient access to your vehicle’s hatch or doors plus an anti-wobble securing system to keep your prized bicycles still while being transported. The Capstone Hitch Mount 2 bike carrier is made from high strength steel and finished in a durable high gloss gray powder coat for years of reliable service. Fit’s 2” receivers and may fit 1 1/4” receivers with the appropriate adaptor (sold separately).

• Carries up to two bikes
• Fits wide range of tire sizes including fat bikes
• Powder Coated for durability
• Connects to 2 inch hitch receivers
• Includes Anti-Wobble device

User questions & answers

Question:	Is there a means for locking the bikes to the rack (anti-theft
Answer:	Dear sir / madam, thank you so much for paying attention to our ALAVENTE 2 Pcs Bicycle Quick-Release Alloy Fork Block Mount Car Rack Carrier Holder for Car Pickup Bed. The " U " bolt diameter about is 3cm / 1.18 inch. So they will not fit for 1 inch diameter pipe. Hope those messages could help you a lot. Thanks! If still have any more questions, please feel free to contact us. ALAVENTE CUSTOMER SERVICE TEAM
Question:	Can the center mast fold over sideways
Answer:	Dear customer, Thank you for paying attention to our ALAVENTE Bicycle Quick-Release Alloy Fork Block Mounts Car Rack Carrier Holders for Car Pickup Bed. Our bicycle quick release alloy fork block mount’s " U " bolt diameter about is 3cm / 1.18 inch, is apply to most bicycle, if the size of your bicycle quick release lever is normal, like the most bicycle, then they will fit. Hope those messages could help you a lot. If you still have any other question, please kindly contact us by message or email. Thanks! ALAVENTE Customer Service Team
Question:	Where is the Capstone bike rack made
Answer:	Dear sir / madam, thank you so much for paying attention to our ALAVENTE 2 Pcs Bicycle Quick-Release Alloy Fork Block Mount Car Rack Carrier Holder for Car Pickup Bed. Our this product are designed to be mounted on any firm surface, can be mounted either vertically or horizontally. Easy to install - Convenient and simple installation steps, comes with quick release skewer for quick access, let you install and use quickly. Hope those messages could help you a lot. Thanks! If still have any more questions, please feel free to contact us. ALAVENTE CUSTOMER SERVICE TEAM
Question:	What is the actual load capacity? My 2 bikes weigh 60 lbs each
Answer:	Dear sir / madam, thank you so much for paying attention to our ALAVENTE 2 Pcs Bicycle Quick-Release Alloy Fork Block Mount Car Rack Carrier Holder for Car Pickup Bed. Our this product is apply to most bicycle, if the size of your bicycle quick release lever is normal, like the most bicycle, then they will fit. Please kindly check our product's picture to get more information about our product's size, to make sure they are same as your bicycle. Hope those messages could help you a lot. Thanks! If still have any more questions, please feel free to contact us. ALAVENTE CUSTOMER SERVICE TEAM

Product features

Capstone Hitch Mount 2 Bike Carrier

Description:

The Capstone Hitch Mount 2 Bike Carrier is designed to safely and easily transport 2 bicycles with tires as narrow as 23 MM Road all the way up to 5 inch fat bike tires. This well designed bike carrier features easy to fold trays and a swing away feature for convenient access to your vehicle’s hatch or doors plus an anti-wobble securing system to keep your prized bicycles still while being transported. The Capstone Hitch Mount 2 bike carrier is made from high strength steel and finished in a durable high gloss gray powder coat for years of reliable service. Fit’s 2” receivers and may fit 1 1/4” receivers with the appropriate adapter (sold separately).

Additional Features:

Anti-wabble mechanism, 180° of pivotal rotation, tilts up & down to allow access to the rear of the vehicle, adjustable locking hooks secure frame to rack. Fits a wide range of tire sizes including fat bikes.

• Ebike Compatible - holds two bikes each weighing 65lbs (130 lbs max load). V70 Hitch Rack is for road bikes, mountain bikes, MTB, fat tire bikes up to 5" wide. Compatible with SUVs and cars using 2” tow hitch receiver. Not for use on RVs (Class B vehicles), front of vehicle, vehicle being towed, 5th wheel or trailer
• Easy Tilt Down & Fold Up - Quick release pedal tilts down loaded bike hitch rack for easy access to car's trunk, also folds up out of the way when not in use. Universal Wheel Cradle - Snugly fits narrow/wide bike tires up to 5” wide. Ratchet straps hold wheels securely in place without scratching rims or damaging tires
• Triple Lock Security - Three locking mechanisms to keep your bikes extra secure. Includes Safety Strap - Feel confident with your precocious cargo
• Patented Anti-Wobble Hitch - Locks the rack to the hitch receiver to reduce movement. Enjoy a smooth rattle free journey!
• Ironclad Warranty - Backed by a 10-year manufacturers warranty against manufacturing defects

User questions & answers

Question:	Do you have to put this together
Answer:	Hi there, yes you do have to assemble this, you'll have to assemble any hitch rack as they come packed down to save you cost on shipping. We do have an instructional booklet and easy instructional videos. You could also take to a bike shop and they will assemble it for you, or use a service like Airtasker. Thanks, Mike | Vibrelli
Question:	How far does the frame hook drop? will this work with a step-thru ebike that doesn’t have a cross bar? and can it be used with a sprinter van
Answer:	Hey there, the frame clamp hook drops to 21", but for any step through bikes on platform racks you should a cross adapter that can be picked up quite cheaply like these: https://www.amazon.com/Swagman-64005-Deluxe-Bar-Adapter/dp/B000YZG8JS/ https://www.amazon.com/Retrospec-Cross-Bar-Adjustable-Adapter-Black/dp/B0817M1S8Y/ It will fit a Sprinter Van if you have a 2"hitch receiver, but I don't think you'll be able to open the rear doors fully. Thanks Mike
Question:	I have a 2 inch receiver integrated on my full cattle guard and number. According to the info it’s not suggested for the front of the vehicle. Why
Answer:	Hey there, thanks for your email. There are different certification standards and manufacturing for front of vehicle... also for RVs (Class B vehicles), vehicle being towed, 5th wheel or trailer. This rack is only certified for 2” tow hitch receivers on SUVs and cars. Thanks, Mike
Question:	Will this work on a Jeep with a rear stair tire
Answer:	Hi there, this depends on how wide your rear tire is, and the hitch. If the distance from the center of your car hitch receiver pin to the outer edge of your tire is 12" or less, you should be OK Thanks Mike

Product features

Super Strong - Ebike Compatible

The V70 Sport bike hitch rack is a heavy duty rack that's perfect for all bikes, including ebikes. It's designed to carry two bikes of max weight 130 lbs (65 lbs per bike). The wheel cradles are custom designed to fit all bike tires up to 5” wide.

Advanced Functionality

The V70 comes with an impressive array of features normally only found on racks three times the cost, including quick release tilt down / fold up, key locking, custom engineered cradles that fit all tires, and a patented anti-wobble hitch.

Triple Locking Security

The rack comes with three locking mechanisms to keep your bikes safe (spare key included). An additional safety strap is also included, so you can feel confident your bikes are extra secure.

Fat & Thin Tire Compatible Wheel Cradles

The unique wheel cradle design allows thin road bike tires and fat tires up to 5 inches wide, to be held firmly in place, while distributing pressure evenly avoiding damage. The quick and easy ratchet strap mechanism secures the wheels, reducing movement when driving.

FOLDS UP

While still attached to the vehicle hitch, the bike rack can easily fold up out of the way when not in use, making it easy to park in the garage or store safely when out on a ride.

TILTS DOWN

With two bikes fully loaded the rack can easily be tilted down with minimal effort, allowing access to the vehicle trunk.

QUICK RELEASE PEDAL

The quick release foot pedal allows the rack to tilt or fold up without having to use any tools, making it easy and convenient.

PATENTED ANTI-WOBBLE HITCH

LOCKS TO VEHICLE

PADDED LOCKING ARMS

LOCKING CABLE

INNOVATION

Vibrelli engineer their products to deliver superior function, using world leading precision manufacturing.

EXPERIENCE

Vibrelli gear is created by riders for riders, the Vibrelli team use their own gear to constantly improve the products.

DURABLE

There’s nothing worse than kit that lets you down when you rely on performance, which is why Vibrelli products are field tested for durability and are built to last the distance.

COMMITTED

Vibrelli is committed to producing the highest quality products that our customers will love. Quality you can rely on.

Product description

Rage Power Sport Blue Devil spare tire mounted 2-bicycle carrier rack for hatchbacks or vans outfitted with a rear spare tire carrier bracket and/or attached wheel. Fits spare tires up to 7-11/16" to 12.5" wide when secured to the spare tire hub mount for hauling 1 or 2 bicycles. Includes bicycle tie-down securing strap and a rear reflector. The bicycle rack cradle section is designed to swing sideways for flush-profile storage against the vehicle's hatch. Key lockable, includes keys. Made with heavy duty steel construction and a durable black paint finish.

• Attaches to a vehicle hatch rear spare hub mount; fits 7-11/16" to 12.5" wide spare tires
• Hauls 1 or 2 bikes safely and is key lockable; Includes keys
• Includes bicycle tie-down strap and rear reflector
• Bike cradles swing to the side for storage
• Heavy duty steel construction with a durable black paint finish

User questions & answers

Question:	will this properly fit on a 2007 jeep liberty
Answer:	About 20 inches.
Question:	Is this secure enough to mount on trailer spare tire
Answer:	M5, 1.5 inches long
Question:	will it fit 315/70R17 , rim depth 8.5inch
Answer:	Some women's bikes have a dropped down top tube which would make it hang crochet.Doug
Question:	Will it fit on a 2005 toyota rav
Answer:	I don't remember the exact weight limit for them, but we have two in our garage. One holds two kids bikes and one holds two adult bikes with no problem. One thing I would recommend is using a heavier duty screw that is a little longer than the ones that come with the rack.

Product description

About Swagman

"Ride, paddle, explore: seek your adventure"

That philosophy was the intention of founders Jim and Jan Morris who saw an opportunity to create a better way to transport your bike back in the early 90’s. Swagman was one of the first companies worldwide to design and market a hitch style bike rack. Over the years, that small bike rack company based in the Okanagan Valley of British Columbia grew to include numerous other ground breaking designs in the North American Bicycle, RV and Automobile markets.

The XTC Cross-Country 2-Bike Rack is designed to make it easy to carry two bikes securely on your car's hitch with no risk of bike-on-car, or bike-on-bike damage. Thanks to a built-in anti-wobble device, the platform-style rack secures solidly to 2 or 1.25-inch hitches. To load the bikes, simply lift them into the wheel platforms, secure the wheels with the integrated wheel straps, and secure the grip arms over the frames. With push button ratcheting arms and sliding wheel platforms, the rack provides a custom fit for bikes with 20 to 29-inch wheels and can accommodate multiple frame types. The soft frame-friendly coating on the grip arms, ensures that your bikes' finishes remain unmarred. In comparison to roof mounted bike racks that generally require you to remove the bike's front wheel and hitch-mounted cradle carriers that don't support the bikes from the base, the XTC Cross-Country is easy to use and worry free. Whether your rack is fully loaded or not in use, the rack provides ready access to your car's trunk. The rack folds up for easy storage when not in use and the center arm folds down to allow access to the rear of vehicle without removing the rack. Built to last, the XTC Cross-Country 2-Bike Rack carries a limited lifetime warranty from Swagman.

Please note: an optional locking hitch pin and 10-millimeter security cable can be used with this rack and are sold separately.

• EASY TO ASSEMBLE: The XTC2 hitch mount bike rack only takes a few minutes to assemble following the instructions. Once installed, simply place your bikes on the rack and start cruising to your destination
• SAVES YOU STORAGE SPACE: Rack folds easily so that you can conveniently store when you are done using it
• WORRY FREE SECURITY: Have peace of mind knowing that your bikes are protected with locking ratchet hooks and locking hitch pin
• VERSATILE: Easily transports up to 2 bikes and is compatible with a Class 2 or higher, 1- 1/4" and 2" hitch receiver. Fits most frame sizes, shapes and style (fits 12" to 29" tire sizes). Maximum weight capacity of 35Ibs. per bike

User questions & answers

Question:	I notice they have a anti wobble hitch pen as being frequently bought together, does it not come with one for the anti wobble device it says it comes with
Answer:	I use my prime
Question:	I use the 1.25 receiver and my bike sways all over the place. Tried tightening all the parts on the underside and it helped just a little. Would the anti-rattle bolt help
Answer:	if you bought the right one for your bike it should fit I bought a aftermarket not h.d. mine went on nicely
Question:	Clearwater, FL police told me we need to put the license plate on the bike rack itself, that there are ways to do it. Anybody know how
Answer:	No it won’t
Question:	I'm not good at, well, mechanics or whatever you call loading bikes on bike racks. Or bike racks on hitches. Nor am I super strong. Thoughts
Answer:	the docking hardware is for a quick detach setup, if you don't already have the quick detach lugs on your scooter now, you will have to order that accessory seperately.

Product features

XTC2

This convenient bike rack is user friendly and easy to install. The wheel-mount was designed so that you don't have to take off your wheels, an you can lift the bike up onto the rack without a ton of effort. Rest the bike's wheels into the wheel hoops, ratchet down the hooks and you're ready to go.

About Swagman

Swagman designs products that can be trusted to get your equipment to it's destination; the trailhead, the bike shop, to your race, your first ride; or to the best ride of your life.

Our products are always evolving to meet the demands of the bike and automobile world. Our mission is to make your life easier and more convenient so that you can focus on the sport that you love.

Our company is made up of outdoor enthusiasts just like you and we understand the necessity of relying on a rack to get your bikes safely to your destination.

Find the perfect rack for your ride!

Product description

Allen's premier 2-bike spare tire mounted carrier delivers incredible ease of use with our patented quick-set up design, along with our dual compound tie-down cradles to fully secure and protect your bicycles. The extra wide bottom foot helps to fully distribute the load of your bicycles on your rear spare tire. Allen's premier series of Racks are packed full of innovative features derived of our nearly 50 years of manufacturing rear mounted bicycles. All items are backed by our exceptional customer service and our lifetime.

• Sport type: Cycling
• IMPORTANT, PLEASE CONSULT MANUFACTURER WEB PAGE FOR SPECIFIC VEHICLE FIT

User questions & answers

Question:	Mounted rack $51 and mounted carrier $90, which should i buy for my wrangler jk (4dr)? thanks
Answer:	It’s a two pack.
Question:	Will this fit a 2000 jeep liberty, and can i stiil open my side pull tailgate
Answer:	The bracket is 6 1/2 inches tall at the max point below the shelves.
Question:	Will this fit a spare tire on my jeep that is a 35x12.50-17? That is, 35 inches in diameter and 12.5 inches wide
Answer:	I am sure the load rating would suffer if you had some strange 30” stud spacing but you can space the brackets as needed
Question:	Will this be able to be secured to the spare wheel with the soft cover on the spare wheel? (Spare wheel is the standard rim and tire size
Answer:	You are basically getting 4x 24"x36" shelves. Grates come in 1'x3' sections. Two grates are used for every two brackets.

Product features

Safe, Rugged, and Easy to Use

The Allen Sports S302 Premier Two Bike Spare Tire Carrier fits most rear mounted spare tires (make sure to confirm specific vehicle fit above). Its unique design sets up quickly and will safely transport your bicycles around town or cross country. A metal frame and two lower 'Sure Straps' deliver exceptional stability on your vehicle. A tie-down system individually secures and protects your bicycles.

Important Fit Note! This Rack Will Not Fit The New 2018 Wrangler Jl Model

Please note that this rack should not be used on any type of a trailer.

Open Frame Design

Allen Sports spare tire racks incorporate an innovative design on the upper feet which allow them to install securely on most rear mounted spare tires.

Quick Set Up Frame

The S302 sets up in seconds. The rack snaps into place right out of the box, and can be folded completely flat with one hand when not in use.

Quick Secure Straps and Dual Compound Cradle

Durable, UV resistant rubber cradle straps quickly secure your bicycle in place and work with a wide range of tube sizes. The tie-downs include a soft cradle bed to fully protect your bicycles during transport.

Wide Profile Bottom Foot

The wide profile lower foot on the S302 supports the weight of the rack and bicycle on the tire, not the rim of the rear mounted spare tire. The innovative design on the rack will fit most oversized spare tires.

About Allen Sports

Dick Allen (pictured left in 1972) started Allen Sports in his garage in 1967. Since its founding, the company has been committed to producing the highest-quality, easiest-to-use bike racks and bicycle related products on the market. Dick, a onetime aerospace engineer, opened Allen Sports after building a prototype bike carrier in his Lincoln, Massachusetts shop in his free time. The first ever trunk-mounted bicycle carrier--made of electrical conduit, metal strapping, and fire hose casings (for padding)-- was thoroughly tested on weekend excursions to Cape Cod. Shortly afterward, Allen took his design to market, and by 1971 had established a national presence for his product.

Today, the family owned company owns more than three dozen patents, operates four warehouses nationally, six factories abroad, and sells products in countries around the world including USA, Mexico, Canada, and China.

Product description

Features a unique hook adjusting system designed to allow quick height adjustment of hooks using quick pins then fine adjustments by rotating knobs to hold bike frame to the rack securely.

• Includes two foam-padded hooks to secure and stabilize bikes to the rack without scratching bike's finish. Hooks and tire cradles adjust to fit most bikes frames with 20" to 26" wheel sizes
• Vertical post can be quickly removed for compact storage
• Bike tire cradles can be adjusted along horizontal bars using quick knobs for convenience and includes rubber straps for added stability.Material:Steel
• Fits Class III and IV standard 2" hitch receivers. 80 lbs Maximum Capacity or up to 40 lbs per bike
• Fit Type: Universal Fit
• Patent Pending
• PLEASE SCROLL DOWN AND BROWSE OUR A+ PAGES FOR MORE PRODUCT INFORMATION.
• Unique hook design adjustments using quick hitch pins assist in accommodating different size bike frame for safe and reliable transport.

User questions & answers

Question:	Can my tailgate come down with this on
Answer:	Not with the bikes in the carrier, but if you don’t put the center post in, you can lowe the tailgate.
Question:	Will this work with a 29” full suspension? Length I guess the main concern
Answer:	Yes it will work..
Question:	could it hold Radrover 4"fat electric bike
Answer:	If the 4” refers to the width of your tires, then no it won’t. I have a mountain bike with 2.65 tires and I either let the air out of the tires or force them in the tire cradle.
Question:	How easily does the fold down function work
Answer:	It looks like the latest iteration of the product (Sep, 2020) no longer offers the fold down feature.

Product features

MaxxHaul 50027 Hitch Mount Platform Style Bike Rack

As one of the manufacturers and distributors of recreational towing and hitch-mount products, MaxxHaul was conceived by our customers' need for a new high quality value brand. With in-house design and quality inspectors and facilities overseas, you'll know your MaxxHaul is here 'For The Long Haul'

Our newly improved MaxxHaul 2-Bike Platform Style Hitch Mount Bike Rack is ideal for your SUV's, trucks, sedan with 2" hitch receiver. Unique hook design adjustments using quick hitch pins assist in accommodating different size bike frame for safe and reliable transport.

Hitch tightener is included to reduce if not eliminate hitch play, wobbling and hitch noise.

Safety First

Always use straps or other securing device to secure bicycles and keep bicycles from excessive movement during transport. Never exceed maximum capacity of 40 lbs per bike or 80 lbs. distributed weight capacity. Read and understand manual prior to using this product.

Unique And Effective

Unique hook design adjustments using quick hitch pins assist in accommodating different size bike frame for safe and reliable transport

Quick Assembly & Installation

Vertical post can be quickly removed using our included quick hitch pins to allow for easy assembly and disassembly for compact storage

Universal Fitment

Platform Bike Rack is equipped with 2" x 2" hitch bar for use on standard 2" Class III and Class IV hitch receivers

Ideal For Various Applications

Perfect for your SUV's, trucks, sedan with 2" hitch receiver.