14 best golden tactical scopes

• Imported
• The Viper HS-T 4-16x44 is one of multiple configurations in the Viper HS-T (Hunting & Shooting Tactical) line. VMR-1 Reticle (MOA) is perfect for accurate holds at extended ranges.
• Incorporating our premium, fully multi-coated, extra-low dispersion lenses brings excellent resolution and color fidelity. The XR coatings provide enhanced light gathering capability while Armortek coating protects the lenses.
• The exposed target-style turrets are constructed for precise and repeatable finger-adjustable clicks. A CRS Zero Stop allows for reliable return to zero capability after dialing temporary elevation corrections.
• A 4x zoom provides magnification versatility while the side focus parallax adjustment provides optimal image focus and parallax removal. The fast focus eyepiece allows the shooter to properly adjust the reticle to your eye.
• The one-piece tube is o-ring sealed and argon purged to ensure waterproof and fogproof performance. The Viper HS-T is a versatile yet simple riflescope that is at home in a hunting, target shooting, or tactical application.

User questions & answers

Question:	Is it 30 mm tube
Answer:	No
Question:	At what magnification are sub tentions correct
Answer:	Yes I have 2 rifles in mine and there is room for 2 more. I have all my ammunition for the rifles and a loaded handgun in the locked shelf inside the cabinet/safe.
Question:	Does this come with the sunshade as well
Answer:	No
Question:	Can someone explian moa and mrad
Answer:	I locked my keys in on the first day. They sent me the battery backup and I was able to get in.

Product description

Rifle Scope

• The Diamondback Tactical First Focal Plane 4-16x44 stands at the intersection of precision and value, delivering an impressive array of features and performance.
• Extra-low dispersion glass and fully multi-coated lenses transmit a crisp, bright sight picture. The first focal plane, glass-etched reticle keep subtensions accurate throughout the 4x zoom range.
• The precision-glide erector system uses premium components in the zoom lens to ensure smooth magnification changes under the harshest conditions.
• Exposed tactical turrets and a side parallax knob give shooters the tools needed for long distance precision shooting. The fast focus eyepiece allows quick and easy reticle focusing.
• The single piece 30mm tube is shockproof, ruggedly built to withstand recoil and impacts. Strong o-ring seals and nitrogen purging guarantee waterproof and fogproof performance.

User questions & answers

Question:	What comes in the 6-24-50 scope box
Answer:	My custom 700 Rem,.Bolt Gun. 308 Palma chambered @155 grains. General Plasterized Hart barreled Beast uses a 20 moa Leupold mount .... With ....Medium Height... vortex rings...... For my Hog Killin 56mm. Vortex
Question:	Best scope ring height for bolt action use
Answer:	No, it’s either Designed to work with Minutes of angle or mill radians the multiplayer for minutes of angle aka MOA is 1.047 or roughly 1 inch at 100 yds and with the 1/4 MOA turrets that’s roughly 1/4” at 100 yds both in elevation (up and down) and Windage (left to right) milliradian aka MRAD one milliradian is 3.6” at one hundred yards and the value of each click is 1/10th of a mil so each 1/10th is .36 of one inch for people new to scopes the MOA is usually easier to use however both measurements are angular so at 200 yds one MRAD is 7.2” and 1 MOA IS 2.094” to answer you’re question further the answer is no they are not Bullet drop compensation Reticles aka BDC but there is great information out there on how to better use you’re Reticle for range finding and instead of adjusting the turrets instead use the reticle like a BDC and use hold over values
Question:	Is the scope specifically made for a certain caliber
Answer:	I use Talley mounts and have it on a Remington Sendero in 300 win mag continues to hold zero after 500 rounds
Question:	Does anyone have any data to support using this on a win 300 mag platform? curious if it can handle the recoil forces. thanks
Answer:	Mine was manufactured in Portugal. It is my understanding from posts on CloudyNights.com Eyepiece Forum that Leica outsourced production there several years ago, so all new stock will be Portugal.

• he Golden Eagle HD is specifically designed for competitive shooters in F-Class, Bench Rest and other shooting disciplines with targets at known distance. A finely subtended, second focal plane reticle and 1/8 MOA clicks help you make subtle adjustments.
• High density, apochromatic lens elements are index matched and generate sharp, high definition images. Premium, XR anti-reflective coatings deliver maximum brightness at the highest magnificaiton.
• A side focus adjustment eliminates down range parallax. An aperture stop ring broadens your depth field allowing you to more easily observe mirage and wind indicators while keeping your target in focus
• A 30mm maintube machined from a single piece of aircraft grade aluminum provides a highly reliable platform for taking precision shots. At 29.5 ounces, you'll be able to adhere to strict competition limits.
• O-ring sealed and argon purged, the Golden Eagle delivers waterproof and fogproof performance. Armortek coatings protect the lenses from scratches, oil, and dirt.

User questions & answers

Question:	Will this view out to 4,000 yards or what distance
Answer:	yes
Question:	What’s it like in low light? Are crosshairs visible in low light
Answer:	18 power. If at 9 power the sub-tensions are doubled.
Question:	Does this scope have a zero stop
Answer:	Hi James,This does indeed come with a sunshade. If you order with Sport Optics we can ship this out today for you. Please feel free to contact us with any further questions: 800-720-9625.
Question:	Does this come with a sunshade
Answer:	Moa 4 clicks at 100 yards = an inch 1/10 mrad 3 clicks at 100 yards = an inch Moa is a finer adjustment. If you're looking for precision you go moa. For speed in reaching your dial you choose mrad.

Product features

Golden Eagle HD 15-60x52 ECR-1 (MOA) Riflescope (TCS-1503)

Competitive shooters require a very specific set of features to stay ahead of the competition, and The Golden Eagle hits the mark (pun intended). The 15-60x magnification, fine reticle, and positive and repeatable tracking are perfect for fine tuning that record shot. Plus, its relatively light weight-29.5 oz.-allows shooters to adhere to strict competition weight limits.

Whether you’re interested in Rimfire Bench Rest, Centerfire Bench Rest, NRA High-Power or F-Class competitions, this is the scope for you.

Dual use for Shooting Tactical/Hunting.

ECR-1 MOA Reticle

• The SCR-1 (Simple Crosshair Reticle) is the exact opposite of a 'busy' reticle. The only thing that needs your attention is a traditional set of fine crosshairs that subtend 0.016 MOA at 40X.
• Second focal plane reticle maintains the same ideally-sized appearance. Listed reticle subtensions used for estimating range, holdover and wind drift correction are accurate at 40x magnification.
• Fast focus eyepiece allows quick and easy reticle focusing.

Optical

Optically Indexed Lenses: Optimize image sharpness and brightness from edge to edge.

Plasma Tech: Cutting edge application process provides unparalleled coating durability and performance.

Convenience

Optional 10 MOA Windage Turret: Included accessory turret allows for dialing a full 10 MOA revolution of windage before the scale repeats.

Aluminum Lens Caps: Premium aluminum screw on eyepiece and objective lens covers included.

Internal & Construction

Extra-Fine Resolution Turret: The resolute increment of adjustment of just 0.125 MOA per click allows competitive shooters to make very small adjustments to fine tune their shots.

Shockproof:Rugged construction withstands recoil and impact.

• The 1-4x24 Crossfire II riflescope is one of many configurations in the Crossfire II line. The V-Brite reticle uses the V-Plex format with battery-powered electronics to illuminate the center dot for hunters/shooters during extra-low light conditions.
• With long eye relief and an ultra-forgiving eye box, you'll be able to quickly get a sight picture and acquire your target. The fast focus eyepiece allows quick and easy reticle focusing.
• Anti-reflective, fully multi-coated lenses provide bright and clear views for the user.
• Capped reset turrets are finger adjustable with MOA clicks that can be reset to zero after sighting in.
• A single piece tube constructed from aircraft grade aluminum ensures strength and shockproof performance. O-ring sealed and nitrogen purged, the Crossfire II delivers waterproof and fog proof performance.

User questions & answers

Question:	Does this scope really weight 2.6 pounds
Answer:	I didn't really weight it as itself but it didn't add much weight to my gun. My Remington 700 with heavy barrel was heavy already.
Question:	Would this work on a ruger 308 precision rifle? Model
Answer:	I dont see why not. You will need high rise scope mounts though. I have it on a Ruger American 30.06.
Question:	Does this have an illuminated reticle
Answer:	It has a illuminated center dot that lights up red. Very nice to have. I've had scopes that had the whole reticle light up and it was way too much goin on in the scope and it would drain the battery way too fast. The center dot is simple effective and great on the battery. Plus with the crosshairs you won't even need the dot about 90% of the time.
Question:	How is the glass? Sight clarity? Especially when you put it at
Answer:	Excellent for the price. Not going to compare to my Razor HD in glass quality or features, but $200 vs $2500, it's unbeatable value and warranty. I have at least 7 crossfires of different sizes on calibers from 22 to 30 cal. Clarity is good enough to watch the bullet trace from a 22lr hit paper at 100 yards at 24x and see all of the bullet holes. Clarity further out is still quite good as well. I highly recommend them.

Product description

VORTEX STRIKE EAGLE 1-6X24 ARBDC

• The updated Strike Eagle 1-6x24 is defined by speed and versatility. A true 1x on the low end adapts to a wide range of scenarios, letting shooters rapidly engage targets from point-blank to extended ranges.
• The magnification ring has been updated and now includes a thread-in throw lever, and the magnification indicators can now be seen without coming off the scope.
• The new illuminated BDC3 reticle focuses the shooter's eye to the target faster and holdovers allow for immediate use out to 650 yards for targets of known distance.
• The fast focus dial on the eyepiece allows for quick and easy reticle focusing. Anti-reflective coatings on all air-to-glass surfaces provide increased light transmission for greater clarity and low-light performance.
• Nitrogen purged and o-ring sealed the for water and fogproof performance. The one piece, aircraft grade aluminum, 30mm tube is shockproof shrugging off recoil and other impacts.

User questions & answers

Question:	Does this unit come with the scope caps
Answer:	It can see to the Moon, what are you trying to see at 4000 yards? I got this so I can see 6.5mm Holes in paper clearly. It can easily see a 18" steel gong at 1400 yards, probably much further. If you are planning on using for long range shooting, keep in mind that it is second focal plane, so the reticle won't help much unless you want to use both turrets or do a lot of math in your head for windage.
Question:	Is the mount included? Pictures show mount but description says nothing about it
Answer:	How low of light? It's a SFP so the crosshairs are bold no matter the zoom, or light level. It diminishes a bit above 45-50x zoom no matter the light brightness. Zoom out as needed for extra brightness. 20-25x should get you out to 1k even at dusk (depending on what caliber you're shooting). Just remember your drop isnt correct unless you are at 40x
Question:	Does this scope come with Vortex lifetime unconditional warranty
Answer:	no
Question:	on brownells. Why is it 100 more here
Answer:	Yes, nice sun shade (true match) and lens caps. It also comes with a great diffuser, that can be very useful in certain light conditions. All in all its just as good as the NightForce's completions we own (and a good bit less expensive).

• The Diamondback Tactical Second Focal Plane 4-12x40 is built on durability and performance and offers features that will benefit any rifle platform.
• Extra-low dispersion glass and XR fully multi-coated lenses give the brightest views possible. The extremely accurate hashmarked based reticle works especially well at extended ranges.
• VMR-1 MOA reticle can be used to effectively determine ranges, holdovers, windage corrections and moving target leads.
• With distinctive, responsive dialing, the exposed tactical turrets are built with the shooter in mind. A zero reset feature keeps zeroing simple and quick.
• Strong o-ring seals, nitrogen purging, and shockproof construction guarantees rugged, waterproof and fogproof performance.

User questions & answers

Question:	Can anyone speak to this scopes low light performance
Answer:	30 mm scope rings, definitely "High" mount separate rings or a Cantilevered AR mount with 1/4" - 1/2" risers below the AR mount.
Question:	does this have a mil dot reticle
Answer:	Not sure, I do not prefer Butler Creek scope covers, the scope comes with Vortex cover/caps, if I were to go with an alternative to the factory covers I would go with one of the bikini style that cover the entire scope, several manufacturers make them.
Question:	How far can you shoot with this
Answer:	That would depend on the setting. The optics on the scope are crystal clear but I don't see that it gathers more light than cheaper scopes. You get what you pay for. If you want world class or if you're only getting 1 scope to last for years and years then go buy a Leupold. If you're easy to please, get the vortex.
Question:	what size flip cap covers fit on here
Answer:	I don't know if this will work on your gun or not. I had a hard time making it work on my rifle, a .300 win Mag., but I did get it to work and the scope worked most excellent. I would recommend that you use a pictinney rail base with at least 15 MOA rise. I would also recommend that you go with the highest Vortex rings you can fine.

Product features

Product Overview

Specifically designed for discriminating hunters and shooters, the Diamondback Tactical series of Riflescopes offer the highest levels of performance and reliability. With generous long eye relief, rugged construction and precise, smooth controls, the Diamondback Tactical Riflescopes are ready for any situation.

Exposed tactical turrets built for dialing elevation and windage allow quick and precise bullet drop and wind drift compensation at extended ranges. When we say precise-we mean it. These turrets track better than any Bloodhound and reliably return to zero every time. A zero-reset feature lets you re-index the zero reference marks on both turrets after sight in, while fiber optic rotation indicators integrated into the turrets provide a visual cue of your turret’s position.

Dual use for Shooting Tactical/Hunting.

VMR-1 MOA Reticle

• Designed to maximize long distance shooting and ranging abilities, the VMR-1 MOA reticle can be used to effectively determine ranges, holdovers, windage corrections and moving target leads.
• Second focal plane (SFP) reticles are located near the scope’s eyepiece behind the image erecting and magnifying lenses. This style of reticle does not visually change in size when you change the magnification. The advantage of an SFP reticle is that it always maintains the same appearance. Listed reticle subtensions used for estimating range, holdover, and wind drift correction are only accurate at one particular magnification.

Optical & Internal

XD Lens Elements: Extra-low dispersion (XD) glass increases resolution and color fidelity, resulting in crisp, sharp images.

XR Fully Multi-Coated: Proprietary coatings increase light transmission with multiple anti-reflective coatings on all air-to-glass surfaces.

Precision-Glide Erector System: Uses premium components in the zoom lens mechanism to ensure smooth magnification changes under the harshest conditions.

Convenience

Fast Focus Eyepiece: Allows quick and easy reticle focusing.

Fiber Optic Radius Bar: The fiber optic Radius Bar visually assists tracking turret rotations.

Magnification Rib: The raised rib on the magnification ring facilitates fast magnification changes in the heat of action.

Construction

Aircraft-Grade Aluminum: Constructed from a solid block of aircraft-grade aluminum for strength and rigidity.

Hard Anodized Finish: Highly durable low-glare matte finish helps camouflage the shooter's position.

Exposed Tactical Turrets: The Diamondback Tactical scopes feature tactical windage and elevation turrets with Zero Reset making adjustments back to zero easy and quick.

• Specification: 3-9x40
• Magnification: 3-9x
• Objective Diameter: 1.57
• Exit pupil: 0.2
• Length: 12.20

User questions & answers

Question:	Is it good for a airsoft sniper
Answer:	It might work if it doesn't you can always return it
Question:	Will this scope work for .22air rife
Answer:	I put mine on a .177 nitro piston air rifle shooting 1200fps and it has been a perfect match for eliminating garden pests from 15 to 40 yards. Make sure you purchase dovetail scope rings that are high enough to provide clearance for your particular rifle, (medium profile minimum).
Question:	would this scope be ok for a .22 rifle
Answer:	You betcha. I have one on a Ruger 10 22 LR rifle and it works wonders. Took me about 20 to 30 minutes to get the scope 0 did good, but it is a nice asset to my rifle. I would recommend it. Hope this helps.
Question:	is it sock resistant
Answer:	Unfortunately, it is not sock resistant. As a matter of fact, socks will actually dissolve the scope. You've been warned. Oh, and dont feed it after midnight, OR get it wet..

Product features

SHARP, CLEAR, BRIGHT - CVLIFE SCOPE

CVLIFE has scopes that can perform in any condition and environment. CVLIFE'S Fully-Multi coated lenses can deliver an amazing 95 percent light transmission across 300 percent more of the visual light spectrum for a high-contrast and color accurate picture, ensuring that the picture stays visible by keeping fog, rain and dirt off the lenses so you never miss a moment.

Use Friendly 3-9X Power Ring

Precise Elevation & Windage Adjustment Turrets

20mm (0.79 Inches) Picatinny Mount

CVLIFE 3-9x40 R4 Reticle Crosshair Scope with Free Mounts

Specification of the Scope

• Magnification: 3-9x
• Objective Diameter: 1.57" (40mm)
• Exit pupil: 0.2"-0.67" (5.1mm-16.9mm)
• Length: 12.20"(31cm)
• Weight: 0.76lb.(345g)
• Tube diameter: 1" (25.4mm)
• Free Offer Rail Mounts: 0.79"(20mm)
• Field of View: 25'-14'@100yards
• Mount ring dia. 1" (25.4mm)
• Click Value: 1/4inch@100 yds

Special Inner and Outer Structure

• The scope includes a Special inner and outer structure to control the interaction between the inner and outer tubes of the scope, which provides long lasting reliability in these interaction and ensures the reticle would not rotate when adjusting. This smart design makes the scope shockproof and provides more precise windage and elevation adjustment.
• Built on an ultra strong 1 inch machined-aluminum tube. Completely sealed and 100% nitrogen filled makes it fog and rain proof. This scope could be used under any weather condition.

• Magnification: 2.5-10X with 40mm objective; Field of View:100 yards of 32.5' @ 2.5x - 8.9' @10x; Laser: 2mW, Class IIIA, reaching 100 yards
• Clearer Image: multi-coated green lens boast much higher light transmittance compared with blue lens
• Illumination Modes: red & green (5 intensity)
• Durable: made of high strength aircraft aluminum
• If you want to install in any 3/8" Dovetail / 11mm Dovetail Rail, Please Search and Buy " CVLIFE 11mm Mount "

User questions & answers

Question:	Will this scope handle the recoil of a .308 AR
Answer:	The eye relief of this scope is only about 2.5" which is fine for low recoil guns like the AR but may not be enough for the recoil of a .308.
Question:	Will this fit on a smith and wesson ar-15? caliber is
Answer:	Very nice have two and both on AR 15
Question:	Can it mounted on a picatinny? See that the 1 star customers complained about this when it says weaver dovetail rail only
Answer:	It works great on my AR mounted on the picatinny rail.
Question:	Ok i have a sks and i dont want to buy the back with intigrated rail can i mount this in the middle of my gun and still see threw the sight
Answer:	You can mount it where the rear sight is.that part is about 80.00 bucks.but you will not be able to see through it...it is a regular scope that looks cool.your eye will need to be about 3" away to see through it.

• FIELD OF VIEW: Magnification 2.5-10X with 40mm objective, field Of View: 100 yards of 32.5' @ 2.5x - 8.9' @10x, laser range up to 100 yards.
• MULTI-COATED GREEN OBJECTIVE LENS, boast higher light transmittance for better clarity performance compared to blue objective lens.
• RED AND GREEN ILLUMINATED RETICLE, 5 brightness levels for all environments.
• A QUALITY COMPLET SET OF LASER SCOPE, Solid aluminum alloy construction, quick and secure attachment to all Picatinny or Weaver rails.
• WATERPROOF, FOG PROOF PERFORMANCE, Nitrogen filled and O-ring sealed for waterproof, fog proof performance.

User questions & answers

Question:	I can’t get the cross hair cap off. Is there a trick? Seems like it should just come off
Answer:	it slides on and off pull up..
Question:	Does it work at night
Answer:	The laser is visible at night and the recticle is illuminated, however it does not illuminate the target. If you can't see it with your naked eyes you won't see it through this scope. Works great in combination with a flashlight though.
Question:	can i use it for airsoft and is it good
Answer:	Not sure on airlift. I use on virgins. This one I use onpcp .22 _ scope with loader are good at 26yards and 61yards. I really don't like the dot pigments, they not as pronounced.
Question:	Will this fit my s&w m&p15-22 without removing the stock flip up sights
Answer:	Yes, I have this scope on my M&P15 and did not have to remove flip up rear sight.

• Magnification power: 4x ,Objective lens: 32mm, Field of view(feet/100 yards): 36.6, Length(inches): 5.5
• High performance optical scope with fiber optic sight for quick and accurate acquisition (with Weaver Slots)
• Crisp image for accurate focus. With the green multi-layer coated lenses, the tactical compact scope can focus target fast and precisely with high light transmission and resolution
• Glass etched reticle with tri-illuminations (green/red/ blue), 3 levels of brightness setting for each color allow shooters to find the perfect brightness needed for lighting and weather different conditions
• Shock proof, recoil, fog resistance (nitrogen filled); high quality aluminum alloy in durable black matte finish

User questions & answers

Question:	Will this sight work well on a smith and wesson m&p 15-22 sport
Answer:	Hi Jesse, this is great question. There's an automatic protection design.The stimulation is limited to 20 seconds and will automatically turn off for one minute before repeating the stimulation again for 20 seconds. If the dog doesn't return to the safe zone, the warning sounds and shock system will automatically shut down after three cycles. But it will immediately stops training if the dog retreats to the safe area.
Question:	What is the eye relief for this scope? I want to canter it next to my long scope but I'm not sure if I will be able to see out of it
Answer:	Hi, thanks for your question. Do you mean that how far the flag should be apart? It depends on the activity area you want to provide for the dog. You can adjust according to your needs. If there're any question, you can also contact our technical at +8613430924538.
Question:	Can it see over a fixed front sight or does it need a riser
Answer:	Hi, thanks for your question. We suggest to use in distance 22 Yds-872 Yds.
Question:	Dose this fit on a nerf rail
Answer:	Hi, thanks for your question. Our dog fence system comes with 50 flags that will meets daily use. And our dog fence system actually can also use without stakes because our gps system allow to set the control distance.

Product description

This base sits at approximately 0.450” high. Also fits H006 Henry Big Boy Gen 2. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. Add EGW’s Practical or HD Scope Rings to make it a complete overhaul! We machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

• Machined From: Domestic 6061 T6 Extruded Aluminum
• Finish: Matte Black Anodized
• Mounting Hardware: Hex Head Screws and Wrench Provided
• Center Spread: 2.40" Overall Length of Mount: 4.306"

User questions & answers

Question:	Will this fit my Henry 357 golden boy
Answer:	Yes, this scope (1-6x24 BDC3) came with Vortex's pop-up lens caps for both the eyepiece and the objective lenses. They work great!
Question:	Will this scope mount fit the H012 R
Answer:	No it is not. scope only
Question:	will this fit the Hoo4m
Answer:	Yes it does come with Vortex lifetime warranty.
Question:	Will this fit my big boy all weather 44mag
Answer:	This is the new model with upgraded features, including throw handle and nice new reticle. I have both the old and new VO SE 1-8x and the new one is much nicer. Maybe that is the reason for the price difference?

Product description

Rail Type: One Piece Picatinny

Machined from: Domestic 6061 T6 Extruded Aluminum

Finish: Matte Black Anodizing

Rear Spread: .5"

Front Spread: 2.4"

Overall Length: 4.306"

Height: .4" (Top of Receiver to Top of Picatinny)

Weight: 2 oz.

Quick Disconnect Ring Compatible: No

Ambidextrous: Yes

Torque Specs: 20 in/lbs

Mounting Hardware: #8-40 X 1/4 Screws and T-10 Bit Included

We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.

Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.

We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.

Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).

We recommend:

0 MOA - if shooting 0-500 yards

20 MOA - if shooting 500-1000 yards



When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.

The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.

Product description

Built to be carried as a standard piece of equipment and be close at hand, the Solo R/T Tactical monocular gives a closer look when needed. It features the Vortex R/T Ranging reticle with reticle focus for accurate range estimation and calling shots. The generous eye relief and a large exit pupil deliver optical performance normally reserved for binoculars, and the premium roof prisms and fully multi-coated optics deliver a bright, clear view. Completely waterproof and nitrogen gaspurged, the Solo R/T features textured rubber armor and a convenient belt or webbing strap clip.

• The Solo Recon Tactical Monocular with 8x magnification and a 36mm objective lens is a great choice for observation and range estimation in a lightweight and compact package
• Fully multi-coated lenses with anti-reflective coatings, the Solo R/T provides excellent light gathering capability in low light situations. The flared eyecup blocks extraneous light and folds down for use with glasses
• A large focus wheel and the smaller reticle focus allow the user to properly focus the image and reticle to their eye for optimal target milling capability
• The Solo R/T comes complete with a utility clip which attaches easily to a vest or belt for quick access in the field
• Textured rubber armor provides added grip and durability. O-ring sealed and nitrogen purged, the monocular brings waterproof and fogproof performance

User questions & answers

Question:	How useful is the manual
Answer:	I guess its fine as manuals go. Its in English so that's a plus. It also is good if you need to start a fire or need something to read when your on the john, lots of versatility i guess.
Question:	will it attach to a tripod or camera stick
Answer:	Yes it will attach to a tripod, a camera stick and a rifle, see the comments section under this item at the Vortex site (www.vortexoptics.com).It may take a little work, but it's easy to make it fit a tripod and the buffer tube of an AR-15.LF
Question:	have a belt clip
Answer:	Yeah, a huge metal belt clip. and comes with a pouch as well. both are not very useful. But the mono itself and the R/T are awesome!
Question:	Is this a range finder? Thank you
Answer:	Yes, it does contain a range finder. It is an optical rangefinder based on a graduated reticle. It is not an electronic rangefinder where you press a button and get a number. To use the Vortex R/T (Ranging/Tactical), you need to know the approximate height of the object. That info, combined with the built-in reticle will give you the distance. An internet image search will give you a picture of the reticle, and several sites have info on how to use it. As an example, if a human (2 meters tall) viewed through the scope was 3 hash marks high (milliradians) then the distance would be 2 meters X 1000 / 3 (hash marks) = 666.6 meters (give or take). As a side note, I really enjoy mine, goes with me often on hikes. Well built and compact.

Product features

Solo Tactical R/T 8x36 Monocular (SOL-3608-RT)

Built to be carried as a standard piece of equipment and close-at-hand, the Solo R/T Tactical Monocular gives a closer look when needed. Features the Vortex R/T Ranging Reticle with reticle focus for accurate range estimation and calling shots. And with the integral utility clip, it attaches to webbing or other flat-edged surfaces for quick external access. The 36mm Solo Tactical R/T monocular delivers bright images, is compact, and easy to handle. Constructed to withstand use in just about any field condition, o-ring seals and nitrogen purging make the Solo a fully waterproof, internally fogproof monocular.

R/T Ranging Reticle

Hashmarked ranging reticle using mrad based subtension lines for ranging, holdover, and windage corrections. Quick-ranging silhouettes. The R/T ranging reticle is based on a form of angular measurement called the milliradian (mrad for short). These angular measurements allow a user to calculate ranges when comparing the reticle to objects of known dimension. The key to effective ranging using this reticle is knowing common objects in your vicinity and their measurements.

Adjusting the Focus

Designed for quick single-handed operation, simply place the thumb and forefinger on the focus wheel and turn to move lens forward or backward.

• Top focus wheel adjusts the reticle.

• Bottom focus wheel adjusts the image.

Adjusting the Eyecup

The heavy duty flared rubber eyecup on the Solo Tactical R/T monocular folds up and down for optimal viewing with or without eyeglasses.

• Flared eyecup blocks stray light when fully extended.

• Eyecup folds down for viewing with eyeglasses.

Attaching the Lanyard

1. Detach clip from the lanyard.

2. Push the loop end through the attachment point on the monocular.

3. Pull the clip through the loop and cinch tight.

4. Re-attach the clip to lanyard.

• Fits scoped rifles up to 46"
• Four accessory pockets store cleaning supplies, targets, hearing and eye protection, etc.
• Easy clean lining
• Thick foam padding
• Includes an adjustable sling

User questions & answers

Question:	Would y'all reccomend it for an AB3 Browning with a 55mm objective and high rings
Answer:	Not sure, works for my Hatsan pellet rifle with scope.
Question:	Will a scoped remington 597 fit
Answer:	Not sure what model a 597 is, but I have a Browning X-bolt with a 42mm objective scope in my caseand it works fine. Hope that helps.
Question:	i have a benelli nova 28 inch barrel, will that fit inside
Answer:	Hi JF, It looks like there are several models of the Benelli Nova with a 28" barrel, most of them looking like they're about 49-50" in length. If yours is the same, it should fit (the case is 52").
Question:	Can these pockets fit ear muffs
Answer:	The pockets are fairly small. Ear plugs, not full size protection.

Product features

4 Pockets, 2 Sizes, 1 Adjustable Sling Included

The Daytona Shotgun or Rifle Case by Allen is a great case to protect and transport your long gun. This case comes equipped with four accessory pockets to get you and your gear where you need to go. The exterior fabric is constructed from rugged Endura fabric that will take whatever you or the elements can throw at it. With our easy clean lining you won't have to spend a bunch of time keeping the inside of your case clean. This case also comes with an adjustable sling for multiple sizes and applications.