10 best allen allen gun cases

• Fits scoped rifles up to 46"
• Four accessory pockets store cleaning supplies, targets, hearing and eye protection, etc.
• Easy clean lining
• Thick foam padding
• Includes an adjustable sling

User questions & answers

Question:	Would y'all reccomend it for an AB3 Browning with a 55mm objective and high rings
Answer:	Not sure, works for my Hatsan pellet rifle with scope.
Question:	Will a scoped remington 597 fit
Answer:	Not sure what model a 597 is, but I have a Browning X-bolt with a 42mm objective scope in my caseand it works fine. Hope that helps.
Question:	i have a benelli nova 28 inch barrel, will that fit inside
Answer:	Hi JF, It looks like there are several models of the Benelli Nova with a 28" barrel, most of them looking like they're about 49-50" in length. If yours is the same, it should fit (the case is 52").
Question:	Can these pockets fit ear muffs
Answer:	The pockets are fairly small. Ear plugs, not full size protection.

Product features

4 Pockets, 2 Sizes, 1 Adjustable Sling Included

The Daytona Shotgun or Rifle Case by Allen is a great case to protect and transport your long gun. This case comes equipped with four accessory pockets to get you and your gear where you need to go. The exterior fabric is constructed from rugged Endura fabric that will take whatever you or the elements can throw at it. With our easy clean lining you won't have to spend a bunch of time keeping the inside of your case clean. This case also comes with an adjustable sling for multiple sizes and applications.

Product description

This knit gun sock is designed to protect your firearm against scratches, dings, dust, and marring when traveling or stored in your safe or hard case. The silicone treatment helps keep moisture away from your gun, which prevents rust.Made in the USA and fits most guns with or without scopes up to 52″ or 132cm in length.

• Imported
• Silicone treated knit fabric will not hold moisture, which prevents rust
• 52" (132 cm) gun sock fits most rifles or shotguns with or without scopes up to 50" (127 cm)
• Drawstring closure - great for storage in safe or gun case or for use in transit
• Designed with only the toughest, roughest users in mind
• Quality tested and ensured for maximum durability
• Made in the USA

User questions & answers

Question:	Are these cotton or some other fabric
Answer:	They are a stretch fabric and I had no trouble getting them over a 50 mm zeiss 5x25. You just have to get it bunched up just before the scope? If you get them stretched ot length wise they are going to be difficult to stretch over the scope. Would I buy them again, you bet!
Question:	Is there anything printed, sewn, or written on the socks
Answer:	nothing is printed on any of the socks and I have a 1903a that they fit with left over space so I tried them on my extended barrel 12 gage and there too it fits well.
Question:	is this USA made or China
Answer:	From info: Allen has a facility just outside Denver, Colorado, where we make these gun socks and many of the other products our consumers love. Our commitment since we opened our doors in 1970 is to make great products at even better values. (Tan #167 and Green/Black #168 gun socks are made in China - all others are Made in the USA).
Question:	The picture does not show the drawstring. Can you please confirm that it has the drawstring closure
Answer:	Yes it has a drawstring - sort of looks like a shoe lace. The sock is nice and thick and offers better than average protection. Would purchase and again.

Product features

Prevent Damage Before It Happens

Allen's 52" Knit Gun Socks help protect against the following:

Product description

Allen’s Tejon Oversized Gun Case in Mossy Oak Break-Up Country camo has an extra wide design to fit guns with bi-pods and large scopes up to 50″ in length. The case also features heavy foam padding, three accessory pockets, a removable padded shoulder strap with heavy weight metal hardware, and a heavy-duty carry handle.

• Mossy Oak Break-Up Country camo
• Fits scoped rifles up to 50"
• 3 external pockets for calls, cleaning supplies, and other accessories

User questions & answers

Question:	I have a windchester 30-06 with burris eliminator 3 scope and a bipod will this case work for me
Answer:	I use this case for a Browning Xbolt 30-06 with a Nikon scope of the same size. It works fine. I have not tried it with a bipod attached. It would depend upon the bipod and how compact it folds up. They are not all the same.
Question:	I have a knight 50 cal with a 50mm oversize scope with a bipod will this fit
Answer:	Yes I put my Thompson center dimension 300 win mag with a bipod and a 50 mm scope and it is fine. I really like the case.
Question:	Am getting a 270 winchester with scope will it fit
Answer:	It should, my Mosberg 30-06 with scope fits with plenty of room.
Question:	inches is that the outside or the inside of the case
Answer:	My "Tejon" measures 50 inches - outside, in length; inside is 49 inches. I use it to carry my classic Winchester Model 101, which is 47-1/4 inches overall leaving 1-3/4 inches of room to spare. They state the case will "fit any rifle up to 48-inches". As can see from my case's actual dimensions, '48 inches' seems a little conservative. Hope this helps.

Product features

Tejon Oversized Rifle Case 50-Inch, Mossy Oak Break-Up Country Camo

The Tejon rifle case by Allen was designed as an oversized gun case at 50-inches long. Easily carries firearms up to 50-inches in length with optics and bipods attached. In addition to size, it also features heavy-duty foam padding to protect your firearm. The Tejon is equipped with three accessory pockets, removable padded shoulder strap with heavyweight metal hardware, and a heavy-duty carry handle.

Product description

The RX Gun Case by Allen is Made in the USA with Realtree Xtra camo. With a rugged Endura fabric exterior, dense foam padding, and a self healing zipper has you covered.

• Rugged Endura fabric construction
• Realtree Xtra camo
• Made in the USA
• Dense foam padding
• Fits rifles up to 46"

Product description

The Dakota CXE 48-inch Rifle Case by Allen features the Gear Fit technology storage flap and pocket design for oversize gear. Made in Realtree Xtra and uses an easy to grab rubber zipper pulls.

• Gear fit storage flap for large accessories
• Multiple storage pockets and organizer for gear and accessories
• Clear pocket panel to see licenses/credentials
• Rubber, lockable zipper pulls
• Heavy-duty dual-density foam for ultimate protection

User questions & answers

Question:	What is the overall interior length of case
Answer:	48 inches holds a standard rifle with scope plenty of room and protect gun has a lot of padding
Question:	remington 870 dm predator shotgun. i expect it will fit. is the case to big
Answer:	Yes, mine holds a model 700 rem mag with 26" barrel and the case is perfect with about 4" of extra space
Question:	Does it come with a carrying strap
Answer:	Only the handle strap, seen in picture
Question:	I would like to mount two revolvers in this case. Will it work
Answer:	It is possible to mount two revolvers in the case, you might have to use different hangers, check with the seller and he can give you that info.
Question:	How bout an AR 15 ? Will that fit ok
Answer:	Height would be the only issue. Depth should be fine.
Question:	Does it have gun hangers inside? Winchester
Answer:	Big, fat padded hangers. They will keep your rifle safe but are terribly ugly and clumsy. You could install your own in about half an hour for an extra $10-$15 using wooden curtain rod holders from Lowe's. Check out my review for more details.
Question:	Dimensions please
Answer:	44 1/4"w, 9 1/2" tall, 4" deep.... all inside dimensions. Hope this helps. Nice case. 38" Henry mounted in mine. Looks great with the red felt background!

Product description

Double rifle case with multiple pockets and shoulder strap. Four zippered pockets: external stretch pocket, pocket on flap, pocket in the back, and large front gusset pocket with adjustable flap.

• ROCKY DOUBLE RIFLE BLACK/TAN
• Made of extra-rugged endura fabric
• Holds 2 rifles side by side in separate padded compartments
• Removable and adjustable padded shoulder strap with heavyweight metal hardware
• Lockable zippers on each rifle compartment
• Daisy chain loops for small accessories
• Sport type: Tactical & Military

Product features

Extra-rugged Endura fabric

Daisy chain loops for small accessories

Lockable zippers on each rifle compartment

Removable and adjustable padded shoulder strap

Product description

The Auto-Fit 2.0 Handgun Soft Case by Allen is the next generation of our wildly popular Auto-Fit handgun soft case line. Designed to fit and protect most semi-auto pistols with its thick foam padding and soft knit lining. The external, front zippered pocket is a great storage space for cleaning accessories or an extra magazine. You can also lock the case using the metal D-ring and the zipper pull.

• SIZE: 9-inch handgun soft case that fits compact semi-auto pistols and revolvers - COLOR: Black
• PROTECTION: Made using thick foam padding and soft knit lining
• ACCESSORY POCKET: Front zippered pocket for cleaning tools, magazine, or other range essentials
• ACCESSORY POCKET: Front zippered pocket for cleaning tools, magazine, or other range essentials
• LOCKABLE: Put a small lock through the zipper pull and metal D-ring

Product description

Allen’s Engage Tactical Rifle Case features thick foam padding, rugged Endura fabric construction, and an easy clean polyester lining. The case also has three magazine pockets, durable web handles, and a D-ring for locking your zippers.

• Fits tactical rifles up to 38"
• Thick foam padding
• Three magazine pockets
• Durable web handles
• Lockable

User questions & answers

Question:	can i shipp this some where else
Answer:	Yes in the US
Question:	What is the case made from- ballistic nylon or polyester
Answer:	It would appear to be nylon. Very durable and yet easy to keep clean.
Question:	what is the height on this case? not listed, need at least 13 in to fit standard ar with red dot
Answer:	From center seam to the zipper I have 12 1/2 inches.
Question:	What size is needed for a c39 sporter
Answer:	Measure your gun, then use the Amazon search engine to search for gun cases that size... "teach a man to fish"

Product description

The officially licensed Ruger Flagstaff 10/22 Rifle Case fits guns up to 40″. Featuring an embroidered logo, three accessory pockets, a padded carry handle, and lockable zippers, this case will both protect your gear and keep it safe. Made with a rugged Endura fabric exterior and an easy clean lining interior.

• Fits Ruger 10/22 scoped rifles up to 40" long
• Rugged endura fabric with dual layer foam padding
• Three accessory pockets for extra storage
• Easy-clean durable lining
• Lockable zippers for added security

User questions & answers

Question:	Is this case USA made
Answer:	Since it was mfg by the Allen company,I thought it was made here.But I just checked the label and it was made in CHINA ! I would not have purchased it if I had seen it before.
Question:	what are the internal measurements? need it to be 12" in width
Answer:	I had to put a Choate stick on my son's 10/22 and with a red dot sight the gun is a very tight fit in the case. Don't think is has anywhere mere the 12" you require.
Question:	Are the zipper pockets large enough to fit 2 of the 25 rd. mags
Answer:	Yes. 1 of the pockets holds exactly 2 of the 25 Rd mags.
Question:	Has anyone tried this case with standard 10/22 with a bsa sweet sixteen scope
Answer:	I use this case with a Simmons .22 scope on weaver over under risers on my standard 10/22. Extremely tight fit but it does fit. Don't expect to have room for anything else in the case though. The pockets on the outside can hold a few mags.

Product features

Embroidered Ruger 10/22 Logo

Show off your love for this classic firearm with the high quality look of this embroidered case, complete with the Ruger insignia and the Ruger 10/22 name.

3 Accessory Pockets

You've spent time and money customizing your 10/22, now just pack up a few essentials and hit the range. Bring along gloves, eyes/ears, and extra mags, then start plinking!

Lockable Case

As any gun owner knows, safety is #1. Lock your case in storage or in transit - simply secure your favorite lock through the zipper and D-ring to guard against prying eyes or little fingers.

The Ruger 10/22 Rifle - One of the Most Popular Firearms of all Time

For the last 50 years, the Ruger 10/22 has been a staple .22 rifle among gun enthusiasts. Its tried and true design, rotary magazine, and availability of aftermarket parts make this firearm both iconic and fun to shoot.

The officially licensed Flagstaff 10/22 case from Allen Company allows you to store your favorite firearm in a sleek case that is designed with you in mind. With Ruger red accents on the trim, handles, and zipper pulls, plus the embroidered Ruger 10/22 logo, your friends at the range will want one for their 10/22, too.

This internal dimensions are 40" x 8", and the case fits scoped rifles and features a rugged Endura fabric exterior, easy clean lining, three zippered accessory pockets, foam padding for protection, a padded handle grip, and heavy-duty zippers.

Product description

Allen’s patent pending Wedge Tactical Case has thick foam padding, soft knit lining, and rugged Endura fabric to protect your gear inside and out. The case also features multiple external pockets for magazines and other accessories as well as a padded hook and loop carry handle. Lockable.

• 4 external pockets hold magazines and other accessories
• Thick foam padding to protect your firearm
• Rugged Endura exterior construction with a soft knit internal lining
• Padded carry handle, lockable case
• Fits tactical rifles up to 32" in length

User questions & answers

Question:	where is it made
Answer:	yes to some extent it does, new growth softens out after couple of months and your face gets used to having hair again. Make sure to apply a small amount to finger tips and get beard balm on skin first then rest of beard. Wash beard with non harsh soap or organic like the one from honest Amish, some itch is normal from old skin, dirt, and oils. keep it clean and try to avoid touching it a lot to keep dirt and other stuff from hands irritating your skin.
Question:	I don't see how wide it is. Can you tell me
Answer:	Yep, that's happened to me. Somewhere the package got hot and melted. I just put the tin in a bowl of hot water, let the balm melt, shake it up, and then let it cool. It'll be nice and smooth again.
Question:	what are the dementions
Answer:	I use both. The oil helps In softening the beard and help reduce itch during growth. I use the balm to help shape and hold the beard.
Question:	On the 32" case, do the two magazine pockets hole one or two magazines per pocket
Answer:	Hi, yes this is just a larger version(4 ounce tin) of our regular beard balm. Thanks and have a great day!