10 best home depot drill bits

Product description

DEWALT's titanium drill bits have a titanium coating that provides longer life when drilling in non-ferrous metals. These bits are also suitable for drilling in wood and plastic and are ideal for commercial and residential applications. The speed tip design reduces walking on start, and the no spin keeps the bit secure in the drill. Includes 21 bits sized from 1/16 to 1/2-Inch in a plastic tough case.

• Speed Tip Reduces Walking
• Ideal for drilling in metal, wood, and plastics
• No spin shanks
• Includes tough case container to keep bits organized
• Titanium Coating for Longer Life
• Bit case may differ from what is shown

User questions & answers

Question:	My drill has a hard time clamping down on the small diameter of the drill bits. What do I use to fix
Answer:	I have a drill with a chuck key and you can get a good grip. The hand tightening chucks don’t work as well
Question:	Can you drill into concrete slab with these bits
Answer:	No you need concrete bits
Question:	Do these work on Black and Decker impact driver as well
Answer:	Any drill chuck it does not work on impact driver but they do make them I have both.
Question:	whats the difference with these and the black oxide set? which is better
Answer:	Titanium bits will work for metal drilling whereas Black Oxide sets are recommend for only wood or plastic.

Product features

DEWALT DW1342

Speed Tip Reduces Walking

Ideal for drilling in metal, wood, and plastics

No spin shanks

Includes tough case container to keep bits organized

Titanium Coating for Longer Life

Product description

Product Specifications:

• Bit Type: Type G
• Clutch Head Bit Sizes: 1/8 inches, 5/32 inches and 3/16 inches
• Bit Shank Size: 1/4 inches (0.25 in.)
• Material: Steel

Product Details:

✔ Clutch power bits are used for a popular fastener that is often found in vintage mobile homes, caravans, recreational vehicles, trailer homes and some carburetors.

✔ Designed to be used with power drills and magnetic bit tip holders.

• VINTAGE MOBILE HOME FASTENER BIT 🏠 - These 8 figure bits are used for a popular fastener that is often found in vintage mobile homes, RVs, caravans and campers.
• POWER DRILLS & MAGNETIC BIT HOLDERS 🔩 - With a 1/4 inch hex shank, these clutch head screw bits are designed to be used with power drills and magnetic bit tip holders.
• HIGH QUALITY 💯 - These Type G Everbilt Clutch Head Power Driver Bits are manufactured from superior quality steel. They will be an excellent and handy addition to your tool shed, workbench or hardware kit.
• PRODUCT DIMENSIONS 📏 - Each bit is 2 inches in Length.
• PACKAGE CONTENTS 📦 - Comes in a box set of 3 different sized bits, 1/8", 5/32" and 3/16".

Product description

Tough, durable Cubitron based Regalite abrasive on Y weight cloth backing. Self sharpening Cubitron sol gel mineral creates sharp new cutting edges as it wears for high cut rates, long life, consistency, increased productivity and fracture toughness. Higher stock removal with less heat and loading.

The DEWALT DW1587 6 Bit 3/8-Inch to 1-Inch Spade Drill Bit Assortment includes six commonly used high-performance drill bits to complement your tool set. The set features the Max Life corner that preserves nail life, the Extreme Speed Channel for efficient chip removal, and a 1/4-inch ball groove shank for quick bit changes. DEWALT spade bits are designed with heavy-duty shanks for extended life and durability.

From the Manufacturer

All DEWALT spade bits are designed with cutting spurs for optimum hole finish, a hang hole for bit storage & wire pulling, full length heat treat for longer life, flats on shank to prevent slipping in chuck, 1/4-inch Quick Change shank which fits all drills, and 1/4-inch quick change holders.

• The product is 6Pc spade bit set
• Easy to use
• The product is manufactured in China
• Spade drill bit set includes six common sizes for versatility
• Max life corner preserves nail life
• 1/4 inch ball groove shank is compatible with most drills
• Measures 8. 8 By 5. 9 By 0. 2 inches; weighs 9. 3 ounces

User questions & answers

Question:	Can these be used with an Impact Drill without ruining them
Answer:	Different strokes for different folks. I think this set is awesome. I have used it on tight nuts and lots of different applications. The beauty of this set is that you have all these tools in one case. I own all of the tools that are in this set, but they get lost and spread out all over the work shelf. With this set everything stays in the sturdy case and they are a strong set of tools
Question:	can I buy individual drill bits to replace broken ones from sets
Answer:	Yes, this is an awesome set of tools to have at home or a t work. They are very sturdy and reliable.
Question:	Would these bits work for drilling through vehicle plastic panels
Answer:	Set includes: (1) 3/8 inches Drive Quick Release ratchet; (1) 3/8 inches Drive 3 inches Extension; (1) 3/8 inches to 1/4 inches Drive adaptor; (7) 1/4 inches Drive standard SAE sockets (5/32, 3/16, 7/32, 1/4, 9/32,5/16,3/8); (7) 1/4 inches Drive standard Metric sockets (5mm, 6mm, 7mm, 8mm, 9mm, 1 0mm, 11mm); (8) 3/8 inches Drive standard SAE sockets (7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8); (8) 3/8 inches Drive standard Metric sockets (12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm) and (1) 3/8 inches Drive Drill adaptor.
Question:	how long are the bits, including the part that goes into the drill chuck
Answer:	You can actually take out the tool tray and put it in a tool draw and use the empty box as storage for bits and bobs

Product description

Neiko Tools U.S.A. Titanium Step Drill Bit 1/4" to 1-3/8" in 1/8" Increments, Two-Flute Design for Faster, Smoother Cutting, 3 Flatted 3/8" Shank, Heat Treated HSS with Titanium Nitride Coating, Self-starting - no walking and no center punch required, Perfect for clean holes in thin materials like steel, stainless steel, copper, aluminum or plastic

• TITANIUM | HIGH SPEED STEEL: classic high speed steel with titanium coating for proven capability and durability in drilling holes in plastic, aluminum, copper, stainless steel and many other types of sheet metal
• 135° SPLIT POINT TIP: increases cutting speed with self-centering and prevents walking
• TWO-FLUTE DESIGN: clears chips faster and allows particles to escape easily
• TRI-FLATTED SHANK: fits into power tools chuck securely and eliminates slip
• INCLUDES 10 STEP SIZES: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8"

User questions & answers

Question:	Will this work to enlarge a 7/8" hole to 1" in an electrical box
Answer:	Mine was from China. Wasn’t Neiko brand. Wouldn’t cut, I tossed it in the trash.
Question:	Is this made in the USA, if not where
Answer:	The shaft is 3/8 on the tool but, it is tapered so the drill chuck jaws can bite down so it will hold on to it, I have used it in my 3/8, 1/2 and my 1/2 mill, with no problem, I hope this helps you!
Question:	does this drill bit fits into the Black and Decker 3/8" 5-amp Variable Speed Drill with Keyless Chuck, DR260B
Answer:	Don't even attempt it, worked on it for over an hour and only managed to get halfway through. Used oil and three different drills. Bit is worthless on a stainless steel sink.
Question:	Drilling a 1 1/4" hole in a stainless steel sink? Any suggestions
Answer:	Don't know but it's a good punch.

Product features

Drilling Essential

Our step drill bits are constructed from traditional HSS combined with a titanium coating to make them even more durable. This also proves the capability and durability of the drill to last through multiple drillings on surfaces such as: plastic, aluminum, copper, stainless steel, and so much more.

Unique 2 Flute Design

Two flute design also lets the material particles escape easily for a much more clean drilling operation. With each step, you can feel the drill bit stop so you never drill bigger than you need to.

Universal Design

The tri-flatted shank is a great universal fit that will give you confidence while you work knowing that your drill bit is securely in place.

Engraved Sizes

Easily identify which size you need with the contrasted, laser engraved sizes inside the step drill bit flute.

Increased Cutting Speed

The split point tip is at 135 degrees which allows you to cut faster throughout multiple uses. This also ensures that you get sharp cutting on a wide variety of materials.

Product description

Drill America KFD29J-PC KFD 29-Piece High-Speed Steel Drill Bit Set contains 29 high-speed steel KFD series Killer Force Drill Bits. Sizes 1/16" - 1/2" x 1/64" increments Sizes: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", 7/32", 15/64", 1/4", 17/64", 9/32", 19/64", 5/16", 21/64", 11/32", 23/64", 3/8", 25/64", 13/32", 27/64", 7/16", 29/64", 15/32", 31/64" and 1/2". Drill America KFD29J-PC KFD Drill Set comes in a unique round drill index that combines form and function into 1 beautifully designed, easy to carry drill set. The shatter proof, water resistant case fits easily, anywhere you need it. Effortlessly grip the set in 1 hand as you would a travel coffee mug, leave it in the cup holder of your truck while on the way to your job or hang it on your belt when all hands are on deck. KFD Killer Force Drill Bits are manufactured from M2 premium grade high speed steel. For use in a wide range of materials in the iron and steel families such aluminum, iron, stainless steel and other hard metal drilling. KFD Killer Force Drill Bits have a 135 degree split point tip for self-centering and reducing thrust. Compared to a conventional 118 degree tip, these drills wont go "walking" on you. KFD Killer Force Drill Bits are black and gold surface treated for use in stainless steel and other hard metal drilling.

• Assortment of 29 jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
• High-speed steel (HSS) provides hardness for wear resistance
• Black and gold oxide finish resists corrosion and increases the hardness of the drill bit
• Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging
• Comes in a plastic storage case

User questions & answers

Question:	Will this product drill through hardened steel? I'm tired of buying bits that say so but go through only mild steel
Answer:	66820 is a set with Mechanics length bits with tri-flat sides. They are shorter lengths vs the longer 44170 Jobber length w/o the tri-flat sides. Tri-flat sides prevent the bits from slipping in a drill chuck. We have seen this preferred in some cases and not by others. Depends on the user and application.
Question:	Can these be sharpened if they become dull
Answer:	The cutter wheel uses diamonds, so it will sharpen the bit. Follow the instructions on the Drill Doctor, and you will be fine.
Question:	how long are they
Answer:	my black case is round.JNW
Question:	How long is the warranty
Answer:	no they do not have 3 flats

Product features

All The Bits You Need

29 Piece Sets includes fractional sizes from 1/16" to 1/2" by 1/64" increments.

Hang for Quick Access

When all hands are on deck, hang the drill index on your belt whether you're in the shop or field.

Easy to Handle Plastic Case

Unique round drill index combines form and function into one beautifully designed, easy to carry drill set.

Fits Anywhere You Need It

Effortlessly grip the set in one hand as you would a travel coffee mug or leave it in the cup holder of your truck while on the way to a job.

135 Degree Split Point Tip

KFD Killer Force Drill Bits have a 135 degree split point tip for self-centering and reducing thrust. Compared to a conventional 118 degree tip, these drills wont go "walking" on you.

Product description

Diablo’s revolutionary range of SDS-Max Rebar Demon 4-cutter carbide-tipped hammer bits are the first full line of bits designed to be the strongest, most durable, and fastest solutions on the market. Diablo’s ultra-hardened, carbide-tips withstand the stress of high-powered hammer drills and the impact of rebar cutting, delivering extreme durability and strength. Produced with Tri-Metal Diffusion Bonding technology, the carbide-tipped head resists heat and prevents breakage for maximum life and productivity. Precision Tip delivers the stability and accuracy required to produce fast, precise holes in concrete with rebar for ANSI approved anchor setting. Optimized for maximum performance in corded and cordless SDS Max rotary hammers.

• Diablo made Dura-Carbide withstands impact and high heat applications, dramatically extending life versus standard hammer bits
• Precision Tip delivers stability and accuracy required for fast, precise holes
• Tri-Metal Diffusion Bonding provides heat resistance and prevents breakage of the full-carbide heat for maximum life and productivity
• Optimized four-flute design removes dust faster, keeping the carbide head cooler for ultimate strength and durability

Product description

Shank silver & Deming set allows large bits. Heat treated high speed steel. Includes hinged wood storage case with steel latches. The photograph shows a s & D drill, but not necessarily this specific size. High speed steel.

• Shank silver & Deming set allows large bits
• This product meets customer requirement
• This product is manufactured in China
• Package weight:2.5 lb

Product description

Committed to Quality, Consistency, Service and Value QUALITY at Viking Drill and Tool begins with the finest tool steel we can buy and ends with the world class products in our catalog. Our cutting tools are designed, engineered and superbly crafted to provide long lasting durability. Our 74,000 square foot St. Paul, Minnesota manufacturing facility is specifically designed for the unique task of efficient high quality cutting tool manufacturing. CONSISTENCY is a natural by-product of our experience and dedication to quality. At Viking Drill and Tool, skilled machine operators working with the world's finest raw materials have the capability of providing you with consistent high quality products time after time, year after year. On our Ultra Bor Super Premium products, we routinely cut recognized tool tolerance standards by one half to insure that our customers receive drills manufactured to the tightest possible specification and utmost in consistency and accuracy. All materials used at Viking Drill and Tool meet the rigorous qualifications of National Aerospace Standard (NAS) 907. This standard, recognized as the most stringent in the industry precludes the use of lower quality steels which do not hold up under rigorous applications. The use of these extreme high quality materials insures that consistency is built in to every one of our U.S. manufactured products. Our extensive selection of U.S. manufactured tools is designed to give you the right tool at the right price for whatever tough job you come up against.

• 29 pc. Ultra Dex Premium Mechanic 3-Flats on Shank 135-Degree Split Point
• 135-Degree split point for accurate centering and fast penetration
• Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance
• Special Hi-Molybdenum tool steel/ Gold Oxide
• Mechanics Length 3-flats on shank

User questions & answers

Question:	are these still made in USA
Answer:	Yes, the are made in Minnesota.
Question:	does this come in the round index as shown or the standard flat style
Answer:	It comes in a round index. I had not used a round index before purchasing this set, and personally I like i much better than the flat style.
Question:	What are the drill bit sizes in this set? The title and description don't say anywhere the actual specific sizes
Answer:	it's 1/16, 5/64,3/32,7/64,1/8,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,17/64,9/32,19/64,5/16,21/64,11/32,23/64,3/8,25/64,13/32,27/64,7/16,29/64,15/32,31/64,1/2
Question:	So, viking drill & tool "inc" owns norseman drill & tool? or norseman is a tradmark company for viking? i'm just wondering. i like to know the company
Answer:	Norseman is a trademark of Viking drill and tool. https://trademarks.justia.com/861/38/norseman-ctd-drill-86138837.html

Product description

Committed to Quality, Consistency, Service and Value QUALITY at Viking Drill and Tool begins with the finest tool steel we can buy and ends with the world class products in our catalog. Our cutting tools are designed, engineered and superbly crafted to provide long lasting durability. Our 74,000 square foot St. Paul, Minnesota manufacturing facility is specifically designed for the unique task of efficient high quality cutting tool manufacturing. CONSISTENCY is a natural by-product of our experience and dedication to quality. At Viking Drill and Tool, skilled machine operators working with the world's finest raw materials have the capability of providing you with consistent high quality products time after time, year after year. On our Ultra Bor Super Premium products, we routinely cut recognized tool tolerance standards by one half to insure that our customers receive drills manufactured to the tightest possible specification and utmost in consistency and accuracy. All materials used at Viking Drill and Tool meet the rigorous qualifications of National Aerospace Standard (NAS) 907. This standard, recognized as the most stringent in the industry precludes the use of lower quality steels which do not hold up under rigorous applications. The use of these extreme high quality materials insures that consistency is built in to every one of our U.S. manufactured products. Our extensive selection of U.S. manufactured tools is designed to give you the right tool at the right price for whatever tough job you come up against.

• 29 pc. Set Premium High Speed Steel Heavy Duty NAS 907B 135-Degree Split Point
• 135-Degree Split Point, 1/16 - 1/2 by 64ths
• Precision ground point, flutes, body, clearance and drill diameter for ultimate accuracy and performance
• Special Hi-Molybdenum tool steel/ Gold Oxide
• NAS 907B Heavy Duty Jobber

User questions & answers

Question:	Whats the sizes? I need a 9/16th hole
Answer:	No this is 1/16 to 1/2 by 64ths
Question:	Are there places to buy individual replacement bits
Answer:	Good morning...it depends on the part number. There are some Viking bits that are sold individually, but for the most part, the bits are sold in package quantities. Thank you, Henry M. Bolden
Question:	Are these SAE or metric
Answer:	In the description it reads the bit sizes range from 1/16 to 1/2 inch by 64ths. This would indicate that it's not metric. Reading the description really can help one understand what one is dealing with.
Question:	What is the best method for sharpening these
Answer:	I like the Drill Doctor

Product description

Material:YG6X Alloy

Bit Type:Tile & Glass Drill Bit

Coated:Titanium

Drill diameter:5mm,6mm,8mm,10mm,12mm

Faster of Hole.Durable several times than general drill bit.

• Titanium 5-12mm Alloy Tile Glass Cross Spear Point head Drill Bits
• Industrial grade of TIN Coated Carbide Point with 4 Cutting edges.
• Drills Glass, Ceramic, Wood, Metal, Plastic, Tile, Cement and more
• Cross-shaped triangular drill bit is a tool used to take hole on ceramics, glass materials.
• It can also be used in cement and brick material supplier.

User questions & answers

Question:	Is this standard drill bit size or dremel size
Answer:	standard bits they work great
Question:	Should the drill bit say hss on it? i am concerned that it may not be the one i ordered
Answer:	It's not HSS. It's cobalt. Much better for hard material.
Question:	will this bit be strong enough to drill out a tapered hole on a HD steering knuckle
Answer:	I've only used my bit on A500 structural steel. With adequate lubrication, the bit does a good job on that steel
Question:	Does it drill through steel
Answer:	If you know how to properly drill through (slow or lubricated) yes.
Question:	Whats the max drilling depth and will this work well for 304SS? Will be performing the op in a lathe
Answer:	The drilling depth is three inches. For drilling 304ss I would use cutting oil on the bit and use multiple stages.