13 best other saddle racks

Product description

Saddles are horizontal kayak roof racks that let your kayak rest on its flatter surface. These types of carriers offer more surface area contact to your boat hull than others. Saddles consist of two pads that extend from the base rack to the bottom of your kayak. They can be either part of a single cradle or two separate pieces that adjust to fit the width of your boat.

If you frequently drive through storms, two sets of saddles will offer a rock-solid support for your kayak. Saddles offer plenty of great benefits; they are easy to load and unload, they offer only the slightest resistance to wind and they take advantage of the aerodynamics of the kayak to reduce fuel usage.

• Smart multi-pivot rubber saddle kayak carriers adjusts and conforms to almost any kayak shape and size for a customized, scratch-free, secure fit every time
• Pivoting saddles make loading and unloading watercraft a breeze
• Constructed of high strength materials and stainless hardware for superior boat security year after year, season after season
• Universal hardware works with ROLA and most other crossbars
• Premium heavy-duty straps and bow/stern tie-downs

User questions & answers

Question:	Can you use 2 systems for 2 kayaks
Answer:	yes - depending on the width of your kayaks and the support bars. My Hobie kayak is 32" wide and when you start adding in the width of the kayak saddles (about 6" each) it gets kinda wide. In my case, two 32" wide Hobie kayaks would need about a 7' cross bar on the roof. May be best to turn the kayaks on their side using the saddles sold here.
Question:	could someone link me to a model like this that will work with the yakima round bars? im looking but just cant seem to find it
Answer:	They work great on my round bars
Question:	Will this work on a 2" round crossbar on a truck lumber rack
Answer:	Yes it fits
Question:	Please provide directions.. How do I properly use the straps? The straps make a very loud (motorized sound) humming sound when traveling above 30 mph
Answer:	I agree on tightening and routing through stuff, but have also found that putting a twist or two on the strap can eliminate that humming and flapping noise. Some may not like the idea of twisting a strap, but at 70+ MPH on the highway my straps stay quiet and secure.

Product description

With its sleek, efficient design, this over-the-door clothes dryer holds an abundance of delicate apparel for energy-saving air drying, sparing valuable laundry room space. The compact unit offers four slender rails for a surprising 6-1/2 feet of clothes-drying capacity. Simply mount the rack's angled hooks over a window ledge, doorframe, shower door, or railing, and use it to gently air-dry cashmere, wool, silk, and other fragile fabrics--or even everyday cotton t-shirts, socks, and towels. A smart choice for dorm rooms, apartments, and other small living spaces, the durable drying rack measures 9-1/4 by 22-3/4 by 1-1/8 inches and carries a 2-year warranty.

• Over-the-door clothes drying rack saves valuable laundry space
• Sleek, compact design hangs over doors, railings, and more
• 4 slender rails for 6-1/2 feet of clothes-drying capacity
• Perfect for gently drying cashmere, wool, and other fragile fabrics
• Measures 9-1/4 by 22-3/4 by 1-1/8 inches; 2-year warranty

User questions & answers

Question:	My door is a little more than 1 - 3/8" inches thick. Will this hang over my door
Answer:	3.5 inches is the width of the surface to place the pictures. I just measured the outer demention and it's about 4.5 inches. So, you'll have enough room to layer pictures slightly over each other as long as the frames aren't too thick or tall. (I have several frames on mine with the tallest being 22x22 inchs and almost 1inch thick and I put another frame slightly overlapping it and they fit nicely). I wish I could attach a pic. I hope this helps.
Question:	If I hang this on a metal shower-door frame (a horizontal, rectangular bar 3" wide) so clothes can drip dry over my bathtub - would that work
Answer:	Hi Please check 5th image in the listing for detailed dimensions , addition to this image small shelf's depth is 4.5" medium's 5" large's 5.5"
Question:	can you still colse the door when you use it
Answer:	Each floating hexagon shelf can hold up to 8 lb
Question:	Will the brackets fit over a 4" wide ledge
Answer:	Maybe, might need to sand them down first

Product description

Rolling Saddle Rack Cart The innovative design of this two wheel saddle rack cart allows for easy transport and maximum storage. Includes a 5-hook bridle bar for the back of the unit. When all attachments are removed it can also double as a hay bale hauler! FREE nylon organizer is completely washable and features 5-7” deep pockets for bottle, brushes, and tools. · Moves on 10” pneumatic tires · 2-tier Removable rack system- 22” L x 11”W · 5-hook bridle bar – 17.5” W · Removable metal basket for bottom tier- Basket is 18” x 15” x 7” · FREE washable nylon organizer · Doubles as a hay bale hauler · Total units measures 42”H x 19”W

• Removable Wire Basket
• Adjustable Handle and Saddle Racks
• Pneumatic Tires
• Grey Hammertone Powder Coated

User questions & answers

Question:	Does the rack fold up at all? It kind of looks like it might come apart
Answer:	Just a smidge smaller than 3.5 of usable space.

Product description

Master Rancher, 3 Tier Saddle Rack, 1-1/2" Metal Tubing, Top & Middle Rack Can Hold Up To 22 LB Each, Bottom Can Hold Up To 44 LB.

• Master Rancher
• 3 Tier Saddle Rack
• 1-1/2" Metal Tubing
• Top & Middle Rack Can Hold Up To 22 LB Each
• Bottom Can Hold Up To 44 LB

User questions & answers

Question:	Can the three tier's be offset (Do they move)? Or will my three saddles be stacked directly on top of each other
Answer:	The rack comes with inserts and rack screws that will allow you to mount any rack-mountable shelf or appliance, just be sure to check the depth on the shelf or appliance to make sure it fits. I have a couple of shelves mounted on mine.
Question:	How tall is this rack
Answer:	WALLSHELF8U has an adjustable mounting depth of 12 inches to 18 inches as well as a dual-position 12 in. shelf that can be at either the top or the bottom depending on rack’s positioning. Atha, StarTech.com Support
Question:	what are the bottom square diminsions
Answer:	Yes, it comes with screws and extenders. My son did the installation, under 10 minutes was all it took.
Question:	Can you take off the top saddle holder? I only have 2 saddles to put on it
Answer:	Hi Miss Olivius. The shelf is MDF.

Product description

The Malone SeaWing universal car rack kayak carrier includes everything you need to carry one kayak bottom down on your roof top or trailer. The unique mid-mount design saves space and allows you to fit two kayaks bottom down on factory or after market cross rails. (with a second set of SeaWing carriers) The universal JAWZ™ mounting hardware fits round, square and factory oval cross rails.

Need extra roof space for cargo or a second kayak yet concerned about gas mileage? Turn to the low-profile SeaWing kayak/cargo carrier, which is truly in a class by itself.

The carrier's mid-point mounting leaves enough room to transport a second kayak (requires another carrier).

The SeaWing combines a single saddle design with mid-point mounting, making it easy to set up while providing extra roof space. Boaters can use this roof space to add a second kayak--the only bottom-down carrier in the market that encourages such versatility. The SeaWing's low profile, meanwhile, flexes gently to cradle your boat while you drive, keeping air resistance at a minimum. And the SeaWing works with most vehicles thanks to the universal-fit Jawz mounting hardware, which fits round, square, and most factory oval cross rails. The carrier even transfers to another vehicle in minutes--no tools required.

Construction features include corrosion-free polycarbon for the frame, ribbed synthetic rubber for the padding, cam-style load straps with buckle protectors, and 50mm and 60mm pre-coated mounting bolts (larger bolts are available for purchase if necessary). Compatible with the Malone Stinger load assist module, the SeaWing measures 27 by 5 by 6 inches (W x H x D) and supports up to 70 pounds.

About Malone Auto Racks

Malone is the fastest-growing rack accessory company in North America, with a track record of more than 10 years of industry leadership and innovation. The company's products are sold in more than 1,500 outdoor online and retail stores throughout the U.S., Canada, Australia, and Europe. Malone operates from the coast of Maine, helping the company stay true to its mission and values. Everything Malone sells must be "simple to sell, simple to install, and simple to use." The company is built to enhance its customers' enjoyment of rivers, lakes, and oceans while minimizing their carbon footprint through aerodynamic transport design and complete material recycling.

• Low-profile kayak/cargo carrier with single saddle design
• Easy-to-set-up mid-point mounting takes up minimal roof space
• Flexes gently to cradle boat and improve gas mileage
• Jawz mounting hardware fits round, square, and most factory oval cross rails
• Measures 27 x 5 x 6 inches (W x H x D); supports up to 70 pounds

User questions & answers

Question:	Does the clamps fit 2017 Toyota Prius Prime cargo bar
Answer:	Will fit any bar less than 1.75" thick
Question:	Can two kayaks be mounted onto a 58" versarail car rack (for a bare roof) using the seawings
Answer:	We are able to fit 2 sets of sea wings on our rack on our Nissan Murano no problem. Two full size sit on top kayaks fit as well.
Question:	I have a 90 lb 35" wide Lifetime Beacon kayak. Will this rack system work
Answer:	Hi Katie, Your kayak will fit but you need to be aware of a few things... For reference, I have a 12 ft Perception Pescador Pro. 34" wide and about 75 lbs and fairly flat on the bottom. The sea wing holds it fine but when loading, you need to be cognizant of the fact that as wide as your yak is, it isn't going to "nestle" down into the V of the wing like a narrow one would. It simply means that you will be making sure the yak doesn't slide off to the side when loading. Once it's centered on the wings, its secure as Fort Knox. Because it mounts in the center of eth V, I can carry two wide yaks on my camper shell-mounted racks since the yaks can hang over the side of the truck slightly. Ultimately, even with the small issue loading (and its nots really a PITA), the sea wings serve me well. I never worry about my rigs once strapped down.
Question:	Does anyone have any experience with mounting these on factory installed Subaru Outback oval bars
Answer:	These fit the factory racks on my 5th Gen Outback (2015 on).

Product description

98. 43" Two-Tier Dumbbell Rack is designed with 12 gauge steel and has an angled lower level for easy lifting. Perfect for storage of Hex Cast Iron, Hex Rubber Coated, Chrome, and Pro-Style Dumbbells. Warning: This product contains one or more phthalate chemicals known to the state of California to cause birth defects and other reproductive harm. Consumer may return the product for a full refund, including shipping cost for both receipt and return of the product within 15 days of his or her receipt.

• Sport Type: Weightlifting
• Package Dimensions: 32.68" L X 25.98" W X 16.14" H
• Package Weight: 127.87 Pounds
• Country Of Origin: China

User questions & answers

Question:	Shouldn't this be 5 pairs and not stated as 10 pairs
Answer:	The 12" x 18" in the product name or description is way off. The width is 19 inches - perfect for all the patch panels and network switches I mounted. The height is about 14 inches plus 3 more for the tray, and the depth is 17 inches.
Question:	What’s the max weight it can hold
Answer:	The width of the WALLSHELF4U is 19 in 483 mm, and the internal width is 18.7 in 474 mm. Atha, StarTech.com Support

Product description

This Three Tier Saddle Rack with Vented Blanket Rack will keep your equipment secure and neat. Features: Removable upper tiers 4 oversized non-marring rubber foot pads Heavy-duty powder coated 38mm tubular steel frame 3 hook bridle hanger Top tiers rotate Vented blanket rack Rack size: 174cm x 76cm x76cm Net weight: 17kg Total weight capacity: 300kg

• Heavy-duty powder coated 38mm tubular steel frame...
• 3 hook bridle hanger...
• Top tiers rotate, Removable upper tiers...
• Vented blanket rack...
• Rack size: H68-1/2 x W30 x D30 inches, Net weight: 38lbs, Weight Capacity: 660lbs

User questions & answers

Question:	what color is it
Answer:	The distance between these wall shelves is different. The small one is approximately 5 inches, and the large one is approximately 7 inches. Hope this helps.