14 best co2 regulator for plants

• DURABLE MATERIAL: Long-lasting durable brass components that will function for many years without rusting
• SPECIFICATIONS: 1.58" high pressure gauge: 0-4000 PSI. Flowmeter: 0-15 scfh. Inlet connection: cga-320
• APPLICATION: Perfect for indoor grow rooms, grow tents, green houses, and hydroponics to enhance the amount of carbon dioxide to the growing environment and speed up growth rates and yields by up to 40%.
• COMPONENTS :A precision regulator, flow gauge, and industrial solenoid valve, 5 meters free plastic dispensing tubing and USA standard 3-prong plug (Hose tail suit for 4.2 mm inside diameter hose. )
• MULTIPLE OPTIONS: This CO2 Regulator will allow you to maintain ideal CO2 levels for optimal growth

User questions & answers

Question:	I set the flow that 7 for my indoor veggies. the 20 lb co2 tank was empty after 36 hours. is this normal
Answer:	Return it. I got 2 defective units back to back.
Question:	How do you read the chart? It seems backwards. For example if you need 1 cfph set flow meter to 7, but if you need 5 cfph set the flow meter to
Answer:	Mine looks the same.
Question:	Do these units act as a back flow preventive device
Answer:	Oval-shaped w temp display in front
Question:	How do i adjust the co2 flow. The ball goes all the way to the top when my controller opens the solenoid. I did not get a operation manual with the co
Answer:	The thermostat on my heater is very sensitive too. I just set it a bit lower than I need and it usually stays where I want it. It has to do with the outside temp of the tank.

Product features

VIVOSUN Hydroponics CO2 Regulator

This VIVOSUN CO2 regulator can be specially used in grow rooms, grow tents, green houses, aquariums, and other places. CO2 is essential to photosynthesis and is often the most overlooked element limiting plant growing. Growing plants with hydroponics requires up to 5 times the amount of CO2 than naturally occurs in the air. Fertilizing the air with CO2 will shorten your growing time and double your harvest yield if done correctly.

Parameters:

Flowmeter: 0-15 scfh

Inlet connection: cga-320

Plastic Tubing: 5 Meters

Hose tail: suit for 4.2 mm inside diameter hose

Solenoid valve

1.58" high pressure gauge

Volts: 110 Volts

USA standard plug

Pressure Gauge

Measure the amount of CO2 being pushed through your system

Easy to Control

Turn the CO2 tank valve to "OFF" when attaching or detaching the CO2 regulator

High-Quality Solenoid Valve

Attach your hose here and thread it throughout your system

• ✔ HIGH QUALITY : CO2 regulator made from precision instruments, Note : This is not for Aquarium CO2. We have one for CO2 aquarium
• ✔ BRASS CONSTRUCTION : for long-lasting dependability and durability and combines a precision regulator, flow gauge, and industrial solenoid valve
• ✔ DESIGNED FOR : indoor gardening, grow rooms and green houses to enhance carbon dioxide to the growing environment. will allow you to maintain ideal CO2 levels for optimum growth.
• ✔ INCREASE METABOLIC RATE : Speeding up growth rates and yields by up to 40%
• ✔ VOLTS : 110 Volts Standard U.S.A electric power : PLASTIC TUBING : 5 Meter Long

User questions & answers

Question:	Is this compatible with titan
Answer:	It weighs about 18 ounces.
Question:	How.long is the power cord
Answer:	No, only fits one. Still a great little case though.
Question:	is it made in USA
Answer:	Hello, Out of the box you will be good for the standard 32% and 36% mixes, but not higher than 40%. Hope this helps, Happy Diving, Instructor Bill OnlineScuba 1 866 728 2293
Question:	Does the tubing have multiple holes in it to dispense the CO
Answer:	Hi, Thanks for your question., It is a yoke. Thanks Onlinescuba 866-728-2293

Product features

MANATEE Hydroponics (CO2) Carbon Dioxide Regulator Emitter System. The Solution for Plant Growth Stimulation.

• Are you looking for Carbon Dioxide Regulator?
• Have a grow room or a growing environment or indoor gardening?
• Want ti have a bigger yields, faster growth or produce bigger plants and enhance your yields?

Our MANATEE CO2 Regulator is the answer.

Why use CO2 :

• To sustain the rate of the plant growth.
• To increase the rate of the plant growth.
• To eliminate pests such as whiteflies and spider mites because at very high concentrations carbon dioxide is toxic to animal life.
• To substantially increase yields.

Plants can use up to 5x more CO2 than naturally occurs in air. CO2 is essential to photosynthesis and is often the most overlooked element limiting the plant growth. Fertilizing air with CO2 can shorten growing time and double your harvest.

SPECIFICATIONS

• Main Power Voltage : 110 Volts
• Temperature COntrol Range : 50 - 115
• Humidity Control Range : 20 - 80% with 5% differential
• Relay Operating Life : 100,000 Electrical
• Maximum Amperage : 15 amps
• Temperature Operating Range : 32 - 120
• Humidity Operating Range : O - 99%
• Feet : 10 feet of 1/4" Airline
• 0 - 4000 PSI Gauge
• The precision flow-gauge can release between 1/2 and 15 SCFH of CO2 per hours (Standard Cubic Feet per house) allow you to maintain ideal CO2 levels for optimum growth.

High Quality

CO2 regulator made from precision instruments. Made from 100% solid brass. For long-lasting dependability and combines a precision regulator, flow gauge and industrial solenoid valve.

Designed FOR

Indoor gardening, grow rooms and green houses to enhance carbon dioxide to the growing environment. It will allow you to maintain ideal CO2 levels for optimum growth.

Fits USA Standard CO2 Tank

The MANATEE CO2 regulator used in this application contains a solenoid (electronic) which allows it to be triggered by programmable electronic timers or controllers. That means you can set your CO2 output to occur steadily over the course of the light hours, then shut off during the dark ones. This way, you can maximum your plant's exposure to CO2 and minimize the waste.

Product description

Items specifics: Connects directly to 20# or 50# CO2 Tank 110V AC with 6' grounded cord 10' of 1/4" airline 0 to 4000PSI Gauge The precision flow-gauge can release between 1/2 and 15 SCFH of CO 2 per hour (Standard Cubic Feet per Hour)

• High quality CO2 regulator made from precision instruments. Designed for grow rooms and green houses to enhance CO2 to the growing environment. Combines a precision regulator, flow gauge, and industrial solenoid valve
• Complete with 6 foot power cable and 10 foot of 1/4 inch air line
• Increases the plants metabolic rate; speeding up growth rates and yields by up to 40%
• Use with a timer or 120V environmental control devices
• A must for optimum plant production in high light intensity gardens.

User questions & answers

Question:	Does it have a bubble counter? How does it work
Answer:	Sure, it will fit on any picatinny or weaver rail.
Question:	Does this come with a CO2 safe hose and if so how long is it
Answer:	Mount the optic over or just behind the ejection port!
Question:	What 2 or 3 way splitter would work with this to go to 2 different fish tanks
Answer:	There is a power switch that controls the brightness and you can turn it off by turning the knob to level "0".
Question:	Can this be plugged into an outlet timer to regulate when CO2 flow is on/off
Answer:	Yes, it can compatible with iron sights.

• PROFESSIONAL DIY KIT! A complete system in 2.5L size bottle, that includes SUS304 stainless bottle, regulator, precision needle valve, and easy adjustable bubble counter
• SAFE! The bottle body is made of 1.5mm thick SUS304 stainless steel (25% thicker than normal 1.2mm bottle). It can sustain pressure up to 80kg/cm2(or 1137 PSI). Safety valve will open automatically when the inside pressure exceeds the safety threshold
• NEEDLE VALVE WITH BUBBLE COUNTER! High precision, aquarium specific needle valve provides accurate fine-tuning. Steady 1 bps is achievable. Bubble counter with check valve built-in. It stops water from back flowing into your CO2 tank (protects your CO2 tanks from rust and corrosion)
• OPTIONAL: 12V DC SOLENOID! Having the solenoid on a timer, you can specify when you want CO2 injection ON and for how long
• ATTENTIONS: Solenoid NOT included, need order separately. Citric acid and sodium bicarbonate NOT included

User questions & answers

Question:	Where can I get the base for the cylinder
Answer:	Yes it has a bubble counter. You will need a 110 volt timer.
Question:	Can an inline diffuser work with this system
Answer:	I would not call it a safety hose. But it come with hose to put in top of grow room. To delivered co2 to the room evenly.
Question:	Can the cylinder be used with a different fzone regulator
Answer:	This is not made for fish tanks. It want work.Please do not buy it for fish tanks.
Question:	Cant find the solenoid anywhere! Anyone kno where to get this exact one
Answer:	yes you can use timer with co2 regulator

Product features

Ideal DIY aquatic co2 system with profesional co2 tubing ,glass diffuser...

CO2 generator is based on the principle reaction of citric acid and sodium bicarbonate mix with water, high purity of carbon dioxide gas is produced. After fully reaction, the CO2 goes through a pressure regulator, bubble counter and diffuser, provide a stable output pressure and flowrate, supply CO2 for photosynthesis, completely solve the disadvantages of the reactive generator pressure instability.

Fzone‘s CO2 generator kits included almost all stuffes needed in auqatic co2 system.

1. 16ft professional PU tubing(NOT normal silica gel metial) with fixing suction cups, super clear.
2. glass diffuser with U shape connector.
3. funnel and measuring cup make it easy for you to replace the raw metirals

Dual gauge regulator together with safety valve, bubble counter

• Precision needle valve. The CO2 flowrate allowing to go as slow as 1 bubble per 5 seconds with our high precision needle valve.
• Safety valve, will open automatically when the pressure is higher than the allowed threshold.
• Bubble Counter, you can read your CO2 flow rate directly on the bubble counter cylinder. Bubble counter with check valve built-in to stop water from back-flowing to CO2 tank.
• Pressure indicator, indicates when it’s time to refill raw materials.

Optional OTS Mini DC 12V Solenoid Valve( Need order separately)

● OTS 12V DC mini solenoid valve, safer than AC solenoid.

● Energy-saving - low power consumption: 0.4 watt only. keeps the solenoid cool to the touch during operation.

● Use with a timer, solenoid valve allows for CO2 to be switched on/off at defined times, e.g. to synchronize with the aquarium lighting.

● Red LED on/off indicator - the operation (on / off) of the solenoid valve can be confirmed by the red LED.

● No noise - without buzzing or humming sound.

● High-quality model - OST brand, special structure for long-lasting durability and dependability.

Upgraded bottle height and diameter rate, solid material used

• Bottle height upgraded to 15inch (1inch higher than the 2L generator bottle), avoiding the overflow efficiently before the regulator screw in which is caused by the reactor of the citric acid and sodium bicarbonate.
• The bottle is made of 1.5mm of SUS304 stainless steel (25% thicker than the regular 1.2mm bottle) and can sustain a pressure of 1137 PSI.

Fzone Aquarium Co2 Generator

• Professional and safe!
• Easy to set up!
• No mess and very effective!
• A perfect complement to nano planted tank.

Product description

Compatible with Titan Controls CO2 Controllers or other 120 Volt controllers and timers. Precision accuracy flow meter - 0.5 to 15 SCF/hour. Features heavy-duty solenoid valve. High quality oil-less pressure gauge. Includes two plastic tank washers and 12 ft of CO2 dispensing line. Brass construction for long-lasting dependability and durability. 1 Amp/120 Volts/60Hz.

• Compatible with Titan Controls CO2 Controller or other 120 volt controllers and timers
• Precision accuracy flow meter - 0.5 to 15 SCF/hour
• Features heavy-duty solenoid valve
• High quality oil-less pressure gauge
• Includes two plastic tank washers and 12 ft of CO2 dispensing line

User questions & answers

Question:	Can multiple tanks run off a single regulator
Answer:	3/16” to 1/4”
Question:	Can I use the co2 rain tubing which is 1/8 " diameter
Answer:	It is CGA-320, THANKS!
Question:	Is there a solenoid cap replacement I can purchase or can I use something else such as a washer
Answer:	I don't recall a detailed one, but its operation is pretty basic. Right hand side fitting on picture attaches to CO2 tank. You need the right size hose to fit bottom fitting, two clamps are included as pictured to secure. Middle dial valve sets desired pressure amount, and bottom dial valve is open/closed. Amount of pressure is dependent to your personal need. I am carbonating green tea at about 30 PSI, and use the locking ring on middle dial valve to lock it to ensure it stays at 30 until tank starts running dry. Happy Carbonating!!!
Question:	You your gage always say low i got a 50lb tank and never been off the low in the green? Of is mine not working right
Answer:	Use a screw driver. This pressure relief valve will automatically discharge the pressure when it is higher than the valve can hold for safety. You can screw down it with a screwdriver If you want a higher pressure volume. Some people may think that this is a kind of gas leakage caused by a defective product, well it's not...

Product features

Titan Controls HGC702710 CO2 Regulator 1 Amp, 120 Volt

Compatible with Titan Controls CO2 Controllers or other 120 Volt controllers and timers. Precision accuracy flow meter—0.5 to 15 SCF/hour. Features heavy-duty solenoid valve. High-quality oilless pressure gauge. Includes two plastic tank washers and 12 ft of CO2 dispensing line. Brass construction for long-lasting dependability and durability. 1 Amp/120 V/ 60 Hz.

• DUAL GAUGES! Dual gauges allows for a more precise reading of inner tank pressure and working output pressure.
• UPDATED SPLIT-TYPE DC SOLENOID! Newest 12V DC split-type solenoid instead 110V AC models, more safe and stable. NEVER noise, automatic turn on/off CO2 with timer.
• HIGH PRECISION STRUCTURE! Fine tuning valve with knurling to precisely control the CO2 output. Made of hard aluminum alloy allow continuous usage without worrying about rust
• BUBBLE COUNTER AND TOOLS INCLUDED! Bubble counter with check valve and tools are included to make the process hassle free.
• ATTENTION! Suitable for standard North American fittings, CGA 320.

User questions & answers

Question:	Are there operating directions for using in an aquarium
Answer:	We don't have the base for the cylinder, you can buy the base from other store on amazon.
Question:	My solenoid went out, is there a way to get just the electrical solenoid
Answer:	Yes, I use an inline diffuser with mine, works great.
Question:	Can i use this to paintball gun tank
Answer:	There 's regulator on the cylinder and cannot be replaced by other regulator.
Question:	What is the different between mini dual gauge and big dual gauge
Answer:	It's in the same listing there's an option to buy it

Product features

Customized Aquatic Solenoid

• Solenoid included, you can easily plug the solenoid into your timer to create a daily automated on/off schedule coupled with the lighting system.
• Customized aquatic 12v DC split-type solenoid, more safe and stable than AC solenoid.
• Low power consumption: 2.5 watts only. keeps the solenoid cool to the touch during operation.
• Modified solenoid to prevent overheating, buzzing, and allows the valve to open and close smoothly.

High Precision needle valve with bubble counter, easy to control your CO2 rate

• Working pressure is between 30-60psi to adjust the CO2 flowrate allowing to go as slow as 1 bubble per 5 seconds with our high precision needle valve.
• Bubble counter has a check valve to prevent any back flow of fluids to the solenoid.

Upgraded Sealing Material

Sealing material and structures have been updated to withstand temperatures between -45 to 90 degrees Fahrenheit. We have included extra sealing rings.

Dual Gauge for both inner tank and output pressure

Dual mini gauge indicates working pressure and cylinder pressure. Left gauge shows output pressure. Right dial indicates CO2 cylinder’s inner pressure.

Solid Meterial Used

Regulator body is made of aluminum alloy. Gauges are made of stainless steel. Needle valves are made of copper electroplated to allow continuous usage without worrying about rust.

Fzone Regulator Upgraded Version

• Solid made of all metal material, durable and sturdy
• Modified Aquatic Solenoid for a silent operation
• Sealing technology, assures no leaking issues
• Easy install, all tools and materials included to get started

• Made, Inspected & Approved by MOD Complete Manufacturing and As Always Designed & Assembled in The USA.
• HIGH QUALITY: CO2 Regulator Made From Precision Instruments.
• BRASS CONSTRUCTION: For Long-Lasting Dependability & Durability Which Combines a Precision Regulator, Flow Gauge, and An Industrial Solenoid Valve.
• DESIGNED FOR: Indoor Gardening, Grow Rooms & Green Houses to enhance carbon dioxide to the growing environment. Will Allow You to Maintain Ideal CO2 Levels for Optimum Growth.
• INCREASE THE PLANT METABOLIC RATE: Speeding up growth rates and yields by up to 40% VOLTS : 110 Volts Standard U.S.A electric power : PLASTIC TUBING : 5 Meter Long

User questions & answers

Question:	i have 2 o rings one red and one clear both or allmost same size both will fit inside brass fitting only see one place to put one o ring which one go
Answer:	SET THE BIG KNOB TO ABOUT 45PSI ON THE WORKING PRESSURE GAUGE, THEN USE THE SIDE KNOB TO ADJUST YOUR BUBBLE COUNTER. LOTS OF YOUTUBE VIDEOS ON SET UP. THEY ARE ALL PRETTY MUCH THE SAME.
Question:	What is the slowest rate of bps? i have a 30, 40, 50, and a 150 gallon aquariums. i am wanting to set them all up with co2 for aquatic plants
Answer:	Please message me With your order# I Will send you part replacement
Question:	What are the dimensions of pockets? What size book can fit
Answer:	i believe it may require an adapter, but those are readily available, even at your local home improvement store.
Question:	Will this regulator fit a nitrogen tank
Answer:	Mini is single stage, 1 spring in regulater to reducing the output pressure, And output pressure not adjustable. Dual stage piece have 2 set spring in regulater, 1 used for output pressure adjustment.

Product features

ALL THE GROWTH NONE OF THE SHRINKAGE

• DESIGNED FOR: Indoor Gardening, Grow Rooms & Green Houses to Enhance Carbon Levels for Optimum Growth.
• INCREASE THE PLANT METABOLIC RATE: Speeds up Growth Rates and Yields By Up To 40% By Using The MDC99003 To Enhance Carbon Dioxide To The Growing Environment.
• Your New MOD Complete CO2 Regulator Will Allow You to Maintain Ideal CO2 Levels for Optimum Growth.
• UNLIKE OTHERS That Require a Lengthy Setup, And Require an ElectricIan For Installation, THE MOD Complete CO2 Regulator & Valve Uses a Normal Electrical Socket at 110 Volts Standard U.S.A Electric Power. Just Plug Into a Normal Socket And Your On Line.
• INCLUDES: Extended 10 FT Long, Durable, Plastic Tubing. Compare Our Item To Similar, Yet Subpar, CO2 Regulator & Valve And I Am Sure You’ll Be Back After A Heart-Felt Disappointment. Our Item Is Simply Superior.

SOLID BRASS CONSTRUCTION

• SOLID BRASS CONSTRUCTION: For Long-Lasting Dependability & Durability
• Combines a Precision Regulator, Flow Gauge, and an Industrial Solenoid Valve.
• The Absolute Best Threading of All CO2 Regulators.
• WE LIKE TO KEEP THINGS SIMPLE. LET THE REVIEWS SPEAK FOR THEMSELVES.

Product description

Package list:

Material: Aluminum alloy

Color: Silver

Suitable interface: w21.8, g5/8(Optional)

Size: 6*7cm / 2.4*2.8 inch(Approx.）



Package list:

1 * CO2 aquarium regulator

• 【Super Sealing Effect】Ultra precision pressure gauge display. Standard interface nut, super sealing effect. High quality trim valve for easy removal and cleaning.
• 【Ultra Precision】CO2 aquarium regulator will always inject the right amount of CO2 at the right time to keep your plants growing the right way.
• 【High quality】High quality alloy material and has a longer life. Most compact sturdy construction.
• 【Large Display】The large display allows for easy reading of your settings to ensure that they are always where you want them to be.
• 【Create the Best Growing Conditions】Perfect CO2 aquarium regulator to create the best growing conditions for your aquarium plants.

User questions & answers

Question:	Does this fit a paintball co2 tank
Answer:	On vacation right now, but can look and reply again once i get home and can look. Depending on which fitting is being used determines which washer to use. When you screw the barbed fitting, it takes one washer, when you screw the hose in, it takes the other washer. I can confirm specifics once am back home
Question:	What type of co2 tank will this fit on? Disposable cartridge, paint ball tank, co2 tank
Answer:	The answer to that question would be .3bps
Question:	Will this fit the 95g flual co2 cartridge
Answer:	Pocket dimensions are approximately 19 inches long and 10 inches high. There is plenty room for multiple soft cover books, magazines, crossword puzzles, etc. The bottom front pockets have a stretchy netting as the fabric - they can hold a large amount of items.
Question:	Does this fit on a 5 lb tank
Answer:	Should be the same fitting as Argon. Might ask the gas supplier.

• ✅DURABLE AND EASY TO INSTALL: Be made of aluminum alloy and copper material, strong and sturdy. Also, easy to install and disassemble.
• ✅FOR MULTIPLE FISH TANKS: With this splitter, you can easily connect up to two or more CO2 diffusers from a single CO2 cylinder. Each outlet is equipped with an individual needle valve allowing precise regulation of CO2 flow, adjustable to every 3 seconds 1 bubble accurately.
• ✅G1/8 INTERFACE OR 4*6MM AIR PIPE: Fits for G1/8 interface(need to unscrew the nut), or connect to the 6*4mm(inner diameter 4mm,outer diameter 6mm) air pipe, the nut is for fixing the air pipe prevent the air pipe from collapsing.
• ✅4 TYPE CHANNELS OPTIONAL: There are 4 types channels optional, can be used in multiple fish tanks to meet all your needs.
• ✅WORRY FREE WARRANTY: Any problem, please contact our store without hesitation. Honor to serve you!

User questions & answers

Question:	Will this work with a diy co2 kit
Answer:	My apologies for the confusion on the "spout" and "nozzle". The OD for the no drip nozzle is 3/4" at the widest barb.

Product features

DURABLE AND EASY TO INSTALL

Be made of aluminum alloy and copper material, strong and sturdy. Also, easy to install and disassemble.

FOR MULTIPLE FISH TANKS

With this splitter, you can easily connect up to two or more CO2 diffusers from a single CO2 cylinder. Each outlet is equipped with an individual needle valve allowing precise regulation of CO2 flow, adjustable to every 3 seconds 1 bubble accurately.

4 TYPE CHANNELS OPTIONAL

There are 4 types channels optional, can be used in multiple fish tanks to meet all your needs.

G1/8 INTERFACE OR 4*6MM AIR PIPE

Fits for G1/8 interface(need to unscrew the nut), or connect to the 6*4mm(inner diameter 4mm,outer diameter 6mm) air pipe, the nut is for fixing the air pipe prevent the air pipe from collapsing.

Galapara CO2 Splitter Regulator Distributor Needle Fine Aluminum Alloy&Copper Aquarium Tank

With this CO2 splitter, you can easily connect up to two or more CO2 diffusers from a single CO2 cylinder. The fine adjusting valve is used for adjust the amount of carbon dioxide finely, this valve with high adjustment fineness, there is no air leakage under the high pressure system. 4 kinds channel optional, can be used in multiple fish tanks at the same time. Keeping your aquatic plants healthy, more convenient and save energy.

show details

as the picture：

shunt subject

branching unit inlet interface

aluminum alloy

fine trimming valve

model specification

as the picture

model specification

as the picture

Product description

Features:

Made of high quality material, which will be durable and reliable

With non-return function to prevent the backflow when the pressure changes, and this can ensure the water plant table and CO2 bottle from damage

It can count the volume of carbon dioxide and supply the plants with enough carbon dioxide

East to install and use, a good choice to make your fish tank different

Double head and single head are available, you can choose according to your needs



Specifications:

Condition: 100% Brand New

Item Type: Bubble Counter

Material: Aluminium Alloy & Acrylic

Color: Silver

Optional Type: Double Head, Single Head

Double Head Size: Approx. 8.2 * 2cm / 3.2 * 0.8 inch(L * D)

Single Head Size: Approx. 8 * 2cm / 3.1 * 0.8 inch(L * D)

Package Weight: Approx. 32~34g



How to Install:

Double Head Bubble Counter:

Add 4/5 water in the bubble counter and then tighten the top cover

Plug the CO2 pipe and then tighten the trachea fastening nut



Single Head Bubble Counter:

1. Take out the seal ring and install on the trachea interface of the valve, then tighten the bubble counter

2. Add 4/5 water in the bubble counter and then tighten the top cover

3. Plug the CO2 pipe and then tighten the trachea fastening nut



Package List:

1 x Bubble Counter



We are right here 24/7 when you need any help, just “Contact Seller” for anything at anytime

• Built-in Check Valve ◆ This bubble counter comes with a built-in check valve; The CO2 Regulator can prevent the backflow when the pressure changes and this can avoid the water plant table and CO2 bottle from damage
• Essential Tool For Aquarium ◆ It can count the volume of carbon dioxide and supply the plants with enough carbon dioxide. Clear and precise bubble formation allows you to count bubbles with ease
• Easy To Install And Use ◆ Single head bubble counter connect to regulating valve directly; Double head bubble counter connect to air pipes at both end; Good choice to make your fish tank different
• Premium Quality ◆ This CO2 bubble counter is made of aluminium alloy & acrylic, which is durable and reliable, and with long service life
• Friendly Service ◆ We care about your feeling and satisfaction, hope you receive all the best; If there is anything you feel unsatisfied with our hair dryer stand, please Contact Seller at anytime, we are just a mail away : )

Product description

Specification:

Item type: Bubble Counter

Condition: 100% brand new

Material: aluminum alloy + acrylic

Color: silver

Options: Single head bubble counter(connect to micrometering valve ), Dual head bubble counter(connect to air tube)

Installed between the water meter and the CO2 refiner/diffuser/dissolver. Pay attention to the gas flow direction during installation.

Package List:

1 x Bubble counter

2 x Sealing ring

• Practical Design---Thickened acrylic wall tube, clear bubble, safe and high pressure resistant. The two ends of the metal material, the bubble counter joint will not appear softening fracture.
• Non-return Function---With non-return function, the CO2 Regulator can prevent the backflow when the pressure changes, and this can ensure the water plant table and CO2 bottle from damage.
• Two Types For Choice---Double head and single head are available, you can choose according to your needs. It can count the volume of carbon dioxide and supply the plants with enough carbon dioxide.
• Internal Precision Check Valve --- This Bubble Counter comes with a built-in check valve and attaches to the regulator for an easy set-up. East to install and use, a good choice to make your fish tank different.
• Premium Replaceable Parts --- This CO2 Bubble Counter is made of high quality material, which is durable and reliable, and with long service life.

• Suitable for CO2 supply system in fish tank, aquarium and others.
• This stainless steel check valve is can prevent the aquarium from water flowing back, which is caused by the decrease, and keep the function and service life of Carbon dioxide bottle.
• This tubing regulator can protect the power head from the water flowing back which is caused by power cut.

Product description

Description:



With this splitter, you can connect up to three CO2 diffusers/supplies from a single CO2 cylinder.

Each outlet is equipped with an individual needle valve allowing precise regulation of CO2 flow.

Easy setup, no modification required to your CO2 regulator.

For CO2 tank use. Good for aquarium plants.

For 4mm/6mm air hose tubing.

• Package Include: 1 x CO2 Splitter; Size: 9.5x7x3cm / 3.74"x2.76"x1.18"(L*W*H)
• For 4mm/6mm air hose tubing. For CO2 tank use. Good for aquarium plants.
• Easy setup, no modification required to your CO2 regulator.
• Each outlet is equipped with an individual needle valve allowing precise regulation of CO2 flow.
• With this splitter, you can connect up to three CO2 diffusers/supplies from a single CO2 cylinder.

User questions & answers

Question:	Does this include the 2 blue bubble counters in the pictures
Answer:	no
Question:	So there are three needle valve knobs, the main and then the 2 on the splitter, how does the adjustment go
Answer:	5 lb co2 tank is what I have running.
Question:	What bubble counter is compatible with this splitter if they're not included
Answer:	No, these are for the big 5lb tanks.
Question:	What size is the thread
Answer:	Yes, this fits on a 5 lb tank. Have it running now.

• DUAL Big GAUGE! 1.6 inch big dual gauge easy to read your cylinder inner and working Pressure.
• UPDATED SPLIT-TYPE DC SOLENOID! Newest 12 DC split-type solenoid instead AC models, more safe and stable. NEVER noise, automatic turn on/off CO2 with timer.
• HIGH PRECISION STRUCTURE-This regulator is designed for the aquarium. High precision fine-tuning easy for co2 to be 1 bubble in 3 seconds. Upgraded sealing material avoid any leak.
• BUBBLE COUNTER AND TOOLS INCLUDED! Together with bubble counter, you can read your co2 flow rate. Bubble counter with check valve function, stop water backflow to bottle. All installing tools included, make all goes easy.
• CLASS 1 MANUFACTURING TECHNOLOGY! Made of hard aluminum alloy, surface spraying treated. Pressure knob and fine tuning knob with knurl.

User questions & answers

Question:	Can this be used with a CO2 cartridge
Answer:	I did not receive the bubble counters. However, the splitter valve seems to be working well.
Question:	Can you adjust the ouput pressure
Answer:	The adjustment knobs are on the very end, the bottom main connector needs to have a threaded male end on the regulator to have the correct connection. Aka the main bottom connector is a female threaded end and needs a male threaded receiver on the regulator or whatever else comes before this splitter.
Question:	It is still releasing co2 even unplugged. Is there a way to fix this
Answer:	Great product. Bubble counter is not included. JARDLI Aquarium CO2 Bubble Counter with Check Valve for CO2 Regulator Injection System https://www.amazon.com/dp/B07VVRJQ1C/ref=cm_sw_r_wa_api_i_p99-Eb0M74JAVA Highly recommended, I been using it for almost 5 months now and I haven’t had any issues so far.
Question:	If the solenoid is not making a clicking sound does that mean it’s not working? C02 will not come through
Answer:	Its prob 3/8 however, it works with any US standard regulator if thats what you want to know

Product features

DC 12V solenoid valve, high Performance, cool operating temperature

● Solenoid included, you can easily plug the solenoid into your timer to create a daily automated on/off schedule coupled with the lighting system.

● Customized aquatic 12v DC split-type solenoid, more safe and stable than AC solenoid.

● Low power consumption: 2.5 watts only. keeps the solenoid cool to the touch during operation.

● Modified solenoid to prevent overheating, buzzing, and allows the valve to open and close smoothly.

High precision needle valve with bubble counter, easy to control your CO2 rate

● Precision needle valve included. The CO2 flowrate allowing to go as slow as 1 bubble per 5 seconds with our high precision needle valve.

● Bubble counter has a check valve to prevent any backflow of fluids to the solenoid.

Upgraded Sealing Material

Sealing material and structures have been updated to withstand temperatures between -45 to 90 degrees Fahrenheit. We have included extra sealing rings.

Dual gauge for both inner tank and output pressure

Dual 1.6inch gauge indicates working pressure and cylinder pressure. Left gauge shows output pressure. Right dial indicates CO2 cylinder’s inner pressure.

Solid Meterial Used

Regulator body is made of aluminum alloy. Gauges are made of stainless steel. Needle valves are made of copper electroplated to allow continuous usage without worrying about rust.

Fzone Regulator Upgraded Version

• Solid made of all-metal material, durable and sturdy
• Modified Aquatic Solenoid for a silent operation
• Sealing technology assures no leaking issues
• Easy install, all tools and materials included to get started