14 best pc temperature

• 【Specification】①Size:1.89"x1.1"x0.67"; ②Temperature range: -58F ~ +230F (-50°C ~ +110°C) ③Accuracy: ±1℃; ④Measurement interval: 0.25S; ⑤ Input: DC 4～25V; ⑥ Cable: 1 meter; ⑦Temperature display unit: ℃/ ℉ switchable
• 【USB power supply】 Power is supplied from USB, so you can use it by simply connecting it to a PC, laptop computer, or device equipped with a USB port.
• 【Excellent visibility】 Built-in blue backlight, which is the easier to see, you can clearly check the temperature even in the dark.
• 【Various uses】 For managing pets, car thermometers, greenhouses, PCs, water tanks, etc. It can also be used for DIY applications.
• 【Warranty and after-sales service】We offer a 12-month warranty, so if you have any questions, please feel free to contact us.

User questions & answers

Question:	What is the best way to mount the sensor for car use
Answer:	I would find an extra panel on the dash, an used switch area or a pocket under the radio, and make a polycarbonate panel to swap out and mount the unit from behind.
Question:	Can we put the whole unit in an infrared dry sauna
Answer:	Mine are all at the tops of my aquariums so are subject to high humidity so I do not see why dryness would affect anything
Question:	where can you place the sensor inside the CPU? Near the processor? or anywhere in the motherboard
Answer:	It depends on what temperature measurement you wish to get reasons from. For CPU, you'll want to clamp it to the base of the heatsink and if really serious, use a little thermal glue between to sensor and heatsink for most accurate readings. Depending on your heatsink, you may be able to place the sensor between the blades of the heatsink, just be sure to get the sensor to touch the base for best results. If you want ambient temperature of internal heat of the computer, just connect it near the middle of the case not in the direct line of your airway ventilation track and don't let the sensor itself touch anything for best readings of internal computer heat.
Question:	Can you view the data over USB
Answer:	Thank you for your question.NO.The USB line just as a power function.Is designed for the convenience.

Product description

Features



5 Channel Fan Controller

Touchscreen LCD

Liquid Crystal Display Module

Temperature Monitor

Fan RPM Display

Fan Fail Alarm

Fits 5.25″ Bay

Easily Setup and Use



Specifications

Product Name: 5 Channel Touchscreen Fan Controller

Model No: FPX-007

Dimensions: 5 7/8"(L) x 3 1/16"(W) x 1 5/8"(H)

Color: Black

Supported OS: Windows 10/8/7/Vista/XP, Mac OSX 10.2+

Weight: 0.35 lbs.

Number of Channels: 5

Material: ABS Plastic

Watts per Channel: 10 W.

• 5 Channel Fan Controller; Fan Fail Alarm
• Touchscreen LCD; Fits 5.25″ Bay
• Liquid Crystal Display Module; Easily Setup and Use
• Temperature Monitor
• Fan RPM Display

User questions & answers

Question:	Are the fan connectors 3 pins or 4 pins
Answer:	3 pins
Question:	When properly set will this automatically turn the fan speed up and down as needed? Thanks and looking forward to your reply
Answer:	Yes u can my fans on top and bottom are faster then front and back... but u can only go to max speed of fan so make sure u look it up or buy faster fans .....
Question:	With the kingwin fpx-007 performance 5.25 for the cpu temperature can you put the temperature reader right under the fan right against the cpu
Answer:	To be honest I put it near the heat sink. That would depend on how big your case is and where you position the FPX-007. You probably would want the length of the temperature probe wire. The length of the wire is about 16 in. I hope this will help.
Question:	Will this work with msi mpg z390i gaming edge ac lga
Answer:	Yes is operates on its own

Product description

Includes LCD display and temperature sensor wire

Model: 5060175589927

• Display Temperatures up to 70c
• Display Temperatures down to -40c
• Sensor can be mounted up to 500mm away from LCD
• SATA Power (5V)
• Display Dimensions: 50mm x 30mm x 15mm

User questions & answers

Question:	will this do both C and f
Answer:	No this only shows Celsius

• 【4-PIN Connectors】 designed for PC car use. you can also use 2 PIN to connect the power supply only. DIY it everywhere to test temperature.
• 【Accurate and Responsive】 with stainless waterproof NTC probe,this aquarium temperature gauge have great sensitivity and accuracy.Sensitivity ±0.05s.Accuracy: ±0.5°F.Temperature Range:-58°F - 230°F /-50°C- 110°C.
• 【Wide Applications】°C/°F Convertable,This computer thermometer widely used in car water temperature detection, air conditioning,refrigerator,water heater temperature detection,computer chassis temperature detection, etc
• 【Liquid Crystal Display】This aquarium thermomters is equipped with backlight display,which is fairly easy to see even in direct sunlight.
• 【Quality Assurance】 every piece of our products is strictly inspected before sale. we offer 12-month warranty

User questions & answers

Question:	Is this the same dimensions as the xspc temperature displays
Answer:	Dimensions: 47mm * 28mm
Question:	Could this be used for a vehicle outside temperature gauge
Answer:	I used it in my 93 Toyota Pickup, but the sensor lead had to be extended.
Question:	How long is the power cord? I have a 150g tall aquarium and I'm curious if this will reach. Thanks
Answer:	The powerchord is 3 feet. But it is USB, so an extension can help you out.
Question:	how wide is the metal probe sensor
Answer:	About 1/8 inch in diameter

Product features

Features

Unit convertable

Easy coversion between °C and °F

Backlight display

Crystal liquid display is designed in backlight,easy to read

even in direct sunlight

while won't too light to bother reptile and fish night activity.

4-PIN CONNECTOR

4-PIN CONNECTOR:Specifically design for pc car users

Specifications

Temperature Range:-50°C-110°C / -58°F - 230°F

Accuracy: ±0.5°F

Sensor type: NTC (10K/3435 Water-proof）

Working Voltage: DC 5-25V

Working Current: Max. 20mA

Operation Temperature:-58°F - 180°F

Size:1.85"x1.1 "x0.67 "

Package content

1 x Digital Thermometer

Tips

* Use a tweezer to unplug the tiny jumper cap on back of unit to switch from Celsius to Fahrenheit.

* Recommend mounting size:1.8"x1.0 "x0.6 "

* The probe is waterproof but the main part is not waterproof.

• Negative Grounding MPPT Solar Charge Controller Tracer4215BN, The Advanced MPPT Control Algorithm makes this 30 Amp MPPT Controller Tracking Efficiency higher than 99.5%
• 150V Max PV Input Allow this Charge Controller Handles More Solar Panels Wiring in Series to minimize PV current, 5 x 12V Solar Panel Connecting in Series will be applicable
• Work with all Lead Acid Batteries, Sealed AGM GEL and Flooded Battery, User mode allows buyer setting their own charging parameters
• RS-485 communication bus interface and Standard MODBUS interface available to meet various communication requirements, Temperature Sensor and PC monitoring Cable Attached
• This 20 amp MPPT Solar Panel Charger works with 260W Solar Panel on 12V Battery System and 520W on 24V Battery. Max Solar Panel 780W, multiple load mode allow you set the load on/off in different situation. A Solid State Relay is recommended if you are using a Power Inverter

User questions & answers

Question:	Will a 6ga wire fit the battery connection terminals
Answer:	I'm with the "cant be too big crowd" however what you find is the wire receivers are always small. My preferred size is double o welding lead. Have 200+ feet on hand.. The trick is how to connect ! For years (space allowing for wire size) simply strip insulation back to .5", cut each inner wire one by one away till the large wire just barely fits hole then tighten screw HARD. If large wire "crowds all simply use the same method only strip back to a comfortable length just be 100% sealed with tape or any other type insulating method ! I've had great results for decades with absolutely ZERO amperage drop that happens every time a mechanical (crimped) connection is made 3-5%....
Question:	I have 8 100w 12v panels. Which is better?: Two 48v arrays in parallel or one 96v array
Answer:	There are trade-offs. First, for this model controller, do not exceed 100 volts series (regardless of 150v max specification). Second, with a 96 volt series string, you can use smaller gauge wire running to the panels, which saves money. But if shade covers one panel, the entire output goes down a lot. Two parallel 48volt arrays *may* be a little more immune to the shading. DO NOT FORGET that the open circuit voltage of a 12 volt panel is approx 20 volts. With this controller, you can not use more than 4 panels in series, so two parallel sets of 4 series panels is YOUR answer.
Question:	I know one can use 2, but can one use 3 solarepic mppt 40a solar charge controllers together? different solar panels, but with one battery bank
Answer:	Yes, I have researched significantly and since you dont normally sync these mppt charge controllers (I know some do) then having 2 or more is all good. I'm not a solar technician but I am an electrician for 12 years and this is a special interest of mine. Theoretically the only issue I can see would be the charge controllers continuously restructuring thier output by seeing the battery voltage fluctuate from the other chargers. But if adding a second charger is common then this is nothing new. My next install will have 4 of these chargers
Question:	What is the difference between this epsolar controller and the epsolar controller sold by renogy
Answer:	They are identical product with different names but the MT-50 is programmed to only communicate with it's mated brand. Also, you can certainly run these together in parallel to use separate arrays with one battery bank. I'm adding each piece at a time with no problems. New array, new controller. I have 2 Renogy and 1 Epever running parallel now & plan to add another set soon. Mine are 40A 150 W with 5-6 panels each charger. They seldom rise above 130W in strong Mexican sun.

Product features

EPEVER Tracer2215BN 20amp Solar Charge Controller Feature:

1. Negative Grounding, 150V /138V PV Input
2. Metal Case allows for natural heat dissipation
3. Support 4 charging options: Sealed, Gel, Flooded and User
4. 4 Stage Charging
5. Serial connection (string) of PV modules allows minimize the charging current as a way of saving the energy
6. Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%
7. Ultra-fast tracking speed and tracking efficiency
8. Features Standard Modbus Interface with RS485 Port

SolarEpic 2215BN Solar Charge Controller 20A:

Built with advanced power tracking technology to optimize the working of your solar charger system. The controller features a smart tracking algorithm that maximizes the energy from the solar PV module(s) and charge the battery. It supports over four charging options: sealed, gel, flooded and user-defined. Battery parameters can be set using the attached MT50 remote meter.

MT50 Remote Meter:

Wide LED screen displays the real time operational data and the working status in digital, graphic and textual forms. Basically used for monitoring and setting the controller, it automatically identifies the type, model and relevant parameter data of solar controllers.

Battery Temperature Sensor and PC Communication Cable:

It is used to monitor each controller on the network using Solar Station PC software and update the firmware. Measures 3m and works great for Tracer BN/AN series MPPT charge controller. The connectors are well made to secure the connection.

Product description

This DC12V governor (JCF1201 type) can be controlled according to the ambient temperature of the fan speed, no manual control, automatic stepless speed, the higher the ambient temperature, the faster the fan speed control, the ambient temperature is below the set the start temperature, the governor can control the fan stops running, in order to save power and eliminate unwanted noise generated by the fan. Variety of 2, 3, 4-wire 12V fans are applicable.



This governor's main features:

1. With anti-reverse power protection, power line reversed, the board will not burn.

2. New dual-mode function: fixed temperature mode and adjustable temperature mode.

3. Fit for 2,3,4 line 12V fan, stepless temperature control can be achieved.

4. Single temperature sensor, easier to use, more responsive control.

5. Fixed mode temperature at 30 degrees, the fan speed control starts from 30 to 50 degrees fan speed linear increase, 50 degrees fan at full speed.

6. Start mode adjustable temperature range: 15 to 50 degrees, the full speed range of 35 to 70 degrees (start-up and full of temperature difference of 20 degrees).

7. The maximum operating temperature of 110 degrees temperature probe beyond this temperature, the probe will be damaged! !

8. On board there is a mode switch, the switch to the F position, the governor fixed temperature mode, switch to the A position, the governor of temperature adjustable mode.

9. Temperature adjustment potentiometer, when the mode switch is in the A position, rotating the potentiometer, you can change the fan-start temperature.

10. Board size: 45x25x30MM (LXWXH), Sensor probe length: 325mm



Package include:

1x Fan Temperaure Control Speed Controller with Sensor Probe

• This DC12V governor (JCF1201 type) can be controlled according to the ambient temperature of the fan speed, no manual control, automatic stepless speed, the higher the ambient temperature, the faster the fan speed control
• Fit for 2,3,4 line 12V fan, stepless temperature control can be achieved.
• Single temperature sensor, easier to use, more responsive control.
• New dual-mode function: fixed temperature mode and adjustable temperature mode.
• Board size: 45x25x30MM (LXWXH), Sensor probe length: 325mm

User questions & answers

Question:	What is the highest temp setting the sytem can be adjusted to
Answer:	50 degrees fan start from 35 end 70 degrees full speed fan , 110 Max or damage sensor
Question:	Does anyone know how i can modify this controller to make the fan faster the colder the sensor gets
Answer:	You're wanting a reverse acting control. This control is direct acting and won't work. You can search for reverse acting temperature controllers online.
Question:	Wil this work with a amplifier? I want the 12v computer fan to increase speed when needed (2 wire
Answer:	No. This is a cheap PWM control. The speed of a DC fan motor is dependent on the voltage provided. A 12 volt fan motor will rotate at twice the speed with 24 volts but all circuits & motors have voltage limits. Components can be damaged with high or low voltage.
Question:	Is it possible to used a higher range probe? Or use my own temperature sensor
Answer:	Probes don't determine the temperature range. The circuit must support the range. The temperature is in Celsius so convert to F. The read out can go to 99.9 C which is 211 F If a different sensor is not the exact same type it won't work correctly. The board is designed to control a specific temperature range and won't work for temperatures higher or lower than the spec. Manufacturer Description This DC12V governor (JCF1201 type) can be controlled according to the ambient temperature of the fan speed, no manual control, automatic stepless speed, the higher the ambient temperature, the faster the fan speed control, the ambient temperature is below the set the start temperature, the governor can control the fan stops running, in order to save power and eliminate unwanted noise generated by the fan. Variety of 2, 3, 4-wire 12V fans are applicable. This governor's main features: 1. With anti-reverse power protection, power line reversed, the board will not burn. 2. New dual-mode function: fixed temperature mode and adjustable temperature mode. 3. Fit for 2,3,4 line 12V fan, stepless temperature control can be achieved. 4. Single temperature sensor, easier to use, more responsive control. 5. Fixed mode temperature at 30 degrees, the fan speed control starts from 30 to 50 degrees fan speed linear increase, 50 degrees fan at full speed. 6. Start mode adjustable temperature range: 15 to 50 degrees, the full speed range of 35 to 70 degrees (start-up and full of temperature difference of 20 degrees). 7. The maximum operating temperature of 110 degrees temperature probe beyond this temperature, the probe will be damaged! ! 8. On board there is a mode switch, the switch to the F position, the governor fixed temperature mode, switch to the A position, the governor of temperature adjustable mode. 9. Temperature adjustment potentiometer, when the mode switch is in the A position, rotating the potentiometer, you can change the fan-start temperature. 10. Board size: 45x25x30MM (LXWXH), Sensor probe length: 325mm Package include: 1x Fan Temperaure Control Speed Controller with Sensor Probe

Product description

Specifications:

Monitoring Range: -50 ~110 degrees

Voltage: 5V - 24V

Interface: Big 4P

Screw Thread: G1/4

Upper Panel Size: Approx. 4 * 8cm

Flat Plate Size: 4 cm * 8 cm

Applicable Pipe: 9mm Outer Diameter

Thermometer Panel Size: Approx. 47.8 * 28.2mm

Package Size: Approx. 12 * 9 * 3cm

Weight: 98g



Package List:

1 * Water Flow Meter

1 * Thermometer

2 * Connectors

2 * Clamps

• 【Water Cooling Kit】A kit for PC water cooling system, consists of a digital thermometer, a water flow meter, connectors and clamps.
• 【Precision Design】A precise digital thermometer monitors temperature of the PC water cool system in real-time.
• 【Water Flow Meter】3 way water flow meter helps you to monitor the speed and working states of the water flow.
• 【High Quality】High-quality and durable, work well in -50℃~110℃ temperature.
• 【Easy to Install】4 pin power supply interface, easy to install.

User questions & answers

Question:	is the flow meter only the spinning gear in the center or does it get a read of actual lph
Answer:	The spinning gear is the only visual indication of flow. The digital readout is temperature of coolant.
Question:	I’ve connected the display to 24v but nothing comes on. Any suggestions
Answer:	It’s a 12 v device

Product description

Specifications:

Temperature probe parameters: 50K B = 3950

Thermostat temperature zone error: The error depends on the temperature probe, usually 3-5%

Stall alarm minimum speed: 700-800 rpm



Function setting switch description:

TFL (No.1): The lowest temperature channel PWM setting. When the ON state FAN1 PWM minimum value is 40%, when OFF, the minimum PWM of FAN1 is 20%.

TP1 TP2 (No. 2, No. 3): The temperature channel control temperature range is explained below (requires use with the temperature probe):

TP1 TP2 accelerates temperature at full speed

Close 35°C45°C

ON OFF 40°C55°C

OFF 50°C70°C

ON ON 60°C90°C

When the temperature is lower than the acceleration temperature, it is output at the minimum speed; when the temperature is exceeded, it is always output at full speed.

BF1 BF2 (No. 4, 5): Corresponding to the FAN1 FAN2 stall alarm function switch. When the corresponding open channel fan fails, the controller will use the sound and light alarm (working with the beep), the alarm will be automatically eliminated, and the fan will be rotated. If both BF1 and BF2 are ON (ON), FAN1, FAN2 have one or two stops, the controller will alarm!



Note:

The installation of electronic modules requires basic knowledge and requires a certain electronic professional foundation and hands-on ability. Please purchase carefully!

Manual measurement, with small error. Please check size in detail before purchase.

Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness.



We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.



Package Includes: 2Pcs

2x speed controller

2x temperature probe

2x hum

• Supports all internal 12V 5A fans, synchronous rectified output, high efficiency, no need for additional heat sinks even for high current operation.
• Multiple fans can be used in parallel (total current does not exceed 5A), support automatic temperature control and air cooling speed control, temperature control speed has four temperature zone settings, widely used.
• It can be turned on with the three-wire fan monitoring function (stall warning).
• Circuit load capacity: 5A for each output and 8A for bus current.
• Output range: 20%-100% for the first channel, or 40%-100% for the first channel (TFL = ON), 10%-100% for the second channel and the third channel. (Note: The above range is only applicable to the PWM range, the actual control effect will vary depending on the fan)

User questions & answers

Question:	Can someone please explain the switches in clear English, not poorly translated gibberish
Answer:	Search youtube for "ZFC39 PWM Fan controller"

Product description

Wire sensor with two pin plug and 50cm sleeved cable.

• Temperature Wire Sensor
• 2-pin Plug
• 50cm Black Sleeved Cable

User questions & answers

Question:	Does it matter how its installed? I see a arrow on one side of the plug , not sure what that represents
Answer:	Its a resister basically, so it shouldn't matter, but the motherboard manual should have some directions for installation. Check where it plugs in for any markings.
Question:	Is this a thermistor, or a thermocouple
Answer:	It's a thermistor. It works with my ASUS Z270-WS motherboard, which requires a thermistor sensor to be plugged into its thermal sensor port.
Question:	The unit came with a plastic sleave over the sensing end. Do you remove the sleave before you install it
Answer:	No, the sleeve is meant to prevent you from accidentally shorting the thermistor's contact. If you do short them, you'll get a very low resistance reading, which would suggest a very hot surface in normal operation. The sleeve is very thin and will not prevent you from accurately measuring temperature.
Question:	Woud this be something I would use on an ASUS Maximus Gene VII motherboard, connected to the T_Sensor connector (2-pin
Answer:	Yes, I use this in my maximus vii hero and it works very well. Its also long enough to get to the top of my full tower case from the port at the bottom of the motherboard.

Product description

The FL Mini Hot Glue Gun is much smaller than a full size glue gun.

The body length is around 4.7 inches and the weight is around 4.7 oz. It is ideal for kids to do hand crafting.

If you need a glue gun for serious jobs, we do have a selection of high power full size hot glue gun.

 

FEATURES:

-Suitable for children's safe use.

-Fast heating and melting.

-Made of durable materials.

-Ergonomic designed with comfortable handling.

 

TECHNICAL PARAMETERS:

-Voltage: 120 V

-Power: 20 W

-Preheat time: less than 3 minutes

-Outer shell material: PA6

-Wire length: 1.5 m/4.9 ft

 

GLUE GUN STICKS:

-Diameter: 0.28 inch

-Length: 3.94 inches

-Quantity: 15 pcs

 

USAGE INFO:

-Do not make skin contact with nozzle and the glue liquid while the gun is heating

-Use the stand and never put the gun flat on it's side while heating

-Do not use in wet environment

-Adults must guide the child while using the glue gun

-Keep the glue stick clean to avoid impurity blocking the nozzle

-Do not pull out of the glue sticks after use

-Give the glue gun several minutes to cool down after use

 

Bring the hot glue gun home today to maximize your creativity this Thanksgiving, Christmas and other festival.

• 🔫 Fast Preheating - This hot glue gun heats up to the target temperature in less than 3 minutes. Simply plug the mini glue gun in, you will have the glue ready in couple of minutes.
• 🔫 Anti-Dripping - To avoid the constant dripping that many hot glue gun have, we designed a special anti-dripping heating chamber and sealing ring. With our FL Mini Hot Glue Gun you never have to worry about creating a huge mess in your workshop.
• 🔫 15 pcs Glue Sticks - The FL Mini Hot Glue Gun comes with 15 pcs of non-toxic high viscidity 0.28 inch (diameter) glue sticks. You could apply the glue onto the surface such as foam, cardboard, fabric, particle board and light weight metal. In addition, our glue stick can also serve as a really good insulating material.
• 🔫 Handling - The FL Mini Hot Glue Gun is designed with ergonomics in mind. The glue gun is lightweight and balanced for easy and comfortable handling.
• 🔫 Durable & Safety Materials - The shell is made from premium ABS plastic, which provides great thermal stability over long term of heating.

User questions & answers

Question:	Can you use wax sticks with this gun
Answer:	No idea. I would only use what manufacturer sends.

• Sensitive NTC Thermistor Probe
• 10K Temperature probe with XH2.54-2P Plug
• 15.7 inch (40cm) in length
• Quick reaction speed
• Mainly used in air conditioner for monitoring temperature

Product features

Epoxy Head

Epoxy head is generally used to detect the ambient temperature, with corrosion resistance.

Copper Head

Copper head is generally used in air conditioning to detect the temperature of copper pipe, with fast temperature conduction.

Stainless Steel Head

Stainless steel head is used to detect the temperature of water and air, with waterproof effect.

NTC Temperature Sensor

Resistor: 5K, 10K, 15K, 20K, 50K, 100K, 150K, 200K

Sensor Head Material: Stainless Steel, Copper, Epoxy

Measuring Temperature Range: -30°C to +105°C (-22°F to +221°F)

Length: 20cm, 30cm, 40cm, 50cm, 100cm, 200cm

Widely Applications:

• For Household Appliances: Air conditioner, refrigerator, freezer, water heater, air heater, dishwasher, dryer,etc.
• For Car: Automobile air conditioner, water temperature sensor, intake air temperature sensor, engine.
• Temperature Control System: Greenhouse, aquarium, etc.

Product description

Superior Replacement temperature Sensor with 12-month warranty included. Used in Hayward Heatpro heat pump models 5 HP, 3100 HP. Goldline Temperature Sensor, GLX-PC-12-KIT

• 10k Ohm Sensor
• Replaces GLX-PC-12-Kit, Works on HP5X Heatpro Heat Pumps
• Temperature Sensor, 20Ft Cable
• 12-month Warranty
• Hayward and Goldline Replacement sensor

User questions & answers

Question:	will this sensor work with a heliocol controler
Answer:	I believe so
Question:	Will this work as a roof top air temp sensor for pool solar
Answer:	Yes. I use one for air temp on my Jandy system and I believe both Pentair and Jandy can use/interchange the same sensor.
Question:	would this work as a solar sensor on a goldline gl-235 system
Answer:	Yes. If you have any issues, please contact your local Pool repairman. Good luck.
Question:	i have a 2nd story, can the cable be spliced in or can i get a longer cable
Answer:	You can splice the cable no problem. Use a 22-24AWG (Gaige) wire. You might see a slight (1-2 degrees) offset in temperature but it will work. Allen

Product description

The 46 Pcs wood burning kit comes with lots of different tips and stuff, meets the needs of any small project. Perfect starter kit for beginners.



One year warranty:

Provide ONE YEAR WARRANTY on our burning tool to target 100% customer satisfaction.



Package include:

1 x Pyrography Woodburning Pen

20 x Wood Burning Tips

10 x Solder Tips

1 x Hot Knife

1 x Wood Burning Pen Holder

12 x Stencils



How to Use:

1.Choose a tip you like and install it to the device

2.Connect the device to a 110V power outlet

3.Wait 3-5 minutes for it to heat up

4.Start drawing on the wood surface with it

5.A wide variety of patterns can be created with the tips and stencils supplied

• WOOD BURNING KIT: The pyrography pen is adjustable temperature. Comes with lots of different tips and stuff, meets the needs of any small project
• EASY OPERATE: Light weight and the ergonomic designed handle to help you operate it in different angles no tired
• MULTI FUNCTIONS: Wood burner tools combines wood burning, soldering iron, leather cutting and hot knife cutter function in one. The different tips for the burner give you a plethora of choices
• PACKAGE INCLUDES: 1 x Pyrography Woodburning Pen, 20 x Wood Burning Tips, 10 x Solder Tips, 1 x Hot Knife, 1 x Wood Burning Pen Holder ,12 x Stencils (numbers, letters and basic symbols set)
• ONE YEAR WARRANTY: Provide ONE YEAR WARRANTY on our burning tool to target 100% customer satisfaction. If there are any product issues, please contact us for free

User questions & answers

Question:	Can you use it to burn messages on concrete or rocks
Answer:	SAFETY FIRST! I do not know how hot this tool gets, but for safety sake, I'd say no. The heat required to "burn" concrete and rocks is also hot enough to compromise (even high-performance concrete) structural integrity or cause it to explode. You should probably look in to concrete stamps or molding tools that are used on wet concrete or paint and a chisel set instead.
Question:	Gold tips won’t screw in the same way as the silver tips on the adapter. I watched the other video but gold tip threading seems too big. Any tips
Answer:	Not a sturdy product.
Question:	Size of alphabet letters
Answer:	Very small, of no use to me.
Question:	Does burning kit come with the transfer tip
Answer:	Yes, love the tool and include instruction.

• Use with any Hayward or Goldline control panel: AquaLogic, ProLogic, AquaPlus
• 10K OHM Sensor used for Water, Air or Solar applications, Includes 15ft cord
• Replaces Part No: GLX-PC-12-KIT, AQ-SOL-LV, AQ-SOL-LV-TC, GL-30, GL-235, GL-235 LV, GL-235 LV/HV, PC-10K
• Manufactured by Optimum Pool Technologies with Guaranteed Compatibility
• NEW IMPROVED design to improve lifespan and part quality. Includes 2" Pipe Clamp.

User questions & answers

Question:	What is the warranty and the accuracy
Answer:	You need to ask the seller about the warranty but as far as accuracy it's dead on

Product features

Optimum Pool Technologies Temperature Sensor

This temperature sensor from Optimum is a direct replacement used with the Aqualogic, AquaPlus, ProLogic, and many other Hayward automation systems. This sensor comes with a 15 foot cord to make installation easy anywhere, and an O-Ring to ensure a watertight seal on piping applications.

Replaces Part Numbers:

• GLX-PC-12-KIT
• AQ-SOL-LV
• AQ-SOL-LV-TC
• GL-30
• GL-235, GL-235 LV, GL-235 LV/HV
• PC-10K