11 best amazon home services hot tubs

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with 40 amp double pole breakers connected to sets of #8 awg wire. Plumbing connections are 3/4" NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• The product is highly durable
• The product is easy to use
• Manufactured in China
• Copper and stainless components
• Lifetime warranty for residential use
• Save up to 60% on your water heating costs with the most advanced, self modulating technology available
• Never run out of hot water with an ECOSMART tankless water heater.

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	I noted someone below stating they got the largest one and they can only run one water source at a time. My guess is they installed it wrong by not getting the electric hooked up right, or maybe the unit was just defective, or they live in Alaska. I went under size with an Eco 27 a few years ago because that’s all my electric panel could handle. We have zero issues in the summer. During winter months we can only run one shower at a time and have to slowly fill a tub (maybe 3/4 fill speed). To save as much money as I am on electric bill and have unlimited shower lengths (only 1 person at a time mid-Dec to mid-March) is totally worth it. On here today because I’m thinking of upping my panel size so was thinking of going with a larger one now. Regardless, CCRC’s experience with the largest unit not working is nothing like the experience I’ve had, and again I intentionally undersized mine for the house. The website has a clear chart to explain size you need based on number of water fixtures in your home and ground water temperature.
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	In the lower states it can, but in the northern states, multiple simultaneous users, it will be overloaded. If you can afford a 3,700 square foot home, then you can place a unit in each appropriate demand zone and be very glad you did. I love mine, live in KY, get great supply when the water is above 60 degrees, and then it slows the flow as the temperature drops. I have dishwasher, washing machine, garden tube, 2 showers, 3 sinks and 4 people. It is better than great in the summer, okay spring and fall, and we are conservative in the winter.
Question:	What is the power consumption of this tank-less heater
Answer:	The instantaneous power consumption while the hot water is running is quite high (up to 18kW or 27kW depending on which model you’re looking at on this page). However, when no hot water is being used, the power consumption is 0 (or a minuscule amount to run an LED light or something). The total power consumption over the course of several days or longer should be much lower than a tank heater but the short term power usage while the heater is making hot water will be much higher than a tank heater. It’s just that the unit sits idle most of the time while a tank heater will use power fairly frequently even when no hot water is needed as the water in the tank cools off over time and needs to be re-heater fairly constantly
Question:	remote
Answer:	This unit does not have the ability to have a remote temperature control.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2" NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Can provide hot water for one sink at 0.5 GPM in warmer climates
• Requires 1 x 30 amp breaker and 10 AWG wire
• For one sink at 0.5 GPM in colder climates the POU 6 is recommended
• Amperage Draw 29 amp. kW - 3.5 kW
• Connection Fittings 1/2" NPT

User questions & answers

Question:	Can the flow rate be adjusted up from 0.5gpm to say 1gpm or 1.5gpm (understood that the output water will be corresponding less hotter)? thanks in adv
Answer:	This is a 199,000 btu model, a 3/4" gas line is required to have sufficient gas supply.
Question:	degree water going in what degree will be at the tap
Answer:	rinnai recommends the GTK03 Grundfos kit for this unit
Question:	are any of these tankless water heaters plug in
Answer:	I think, you need buy a WiFi module, call Rennai and ask. Circ-logic did not work for me, I had to install re circulation pipe. Because of the high minimum flow requirements, this unit did not work with any regular re circulation pump, so wasted money buying a Watts pump. And paid double for the labor. Rennai told me that I should have bought their thankless heater with re-circulation built in.
Question:	Would you recommend this model for a shower in a guest bathroom
Answer:	IT CAME WITH ADAPTERS ON THE TOP. NO PIPING.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: This product is fixed flow, which means that the output temperature rise of this product is determined by flow rate of the application. This chart gives you the expected temperature rise for various sink flow rates from 0.5 to 1.5 gallons per minute.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Eco Smart ECO 36 Electric Tankless Water Heater, 36 KW at 240 Volts with Patented Self Modulating Technology Why Eco Smart? If you have a need for a high amount of hot water then the ECO 36 is the right choice. The ECO 36 is the largest electric tankless water heater available with our patented self-modulating technology. This smart technology tankless water heater is ideal for the northern United States, where incoming water temperatures can reach as low as 37 degrees F. The ECO 36 is capable of heating nearly 3.5 gallons per minute at this low temperature. To put that into perspective, it can handle up to two showers running at the same time and never run out of hot water. For homes in the southern United States, the ECO 36 is perfect for large Roman-style and Jacuzzi tubs or high demand of hot water between multiple applications. It can handle up to 6 gallons per minute, which means you can run four showers and a sink simultaneously and never run out of hot water. A digital temperature control allows you to set your temperature in increments of 1 degree, so you can set the temperature to how you like it. The ECO 36 is the most powerful model from our full line of tankless water heaters, with the capacity to handle a large single-family home.Take a look at our full line of tankless water heaters below to see what's perfect for you. THIS MODEL REQUIRES 150 AMPS DEDICATED!. Required Wire: 4 x 8 AWG

From the Manufacturer

Ecosmart ECO 36 Electric Tankless Water Heater, 36 KW at 240 Volts with Patented Self Modulating Technology Why EcoSmart? If you have a need for a high amount of hot water then the ECO 36 is the right choice. The ECO 36 is the largest electric tankless water heater available with our patented self modulating technology. This smart technology tankless water heater is ideal for the northern United States, where incoming water temperatures can reach as low as 37 degrees F. The ECO 36 is capable of heating nearly 3.5 gallons per minute at this low temperature. To put that into perspective, it can handle up to two showers running at the same time and never run out of hot water. For homes in the southern United States, the ECO 36 is perfect for large Roman-style and Jacuzzi tubs or high demand of hot water between multiple applications. It can handle up to 6 gallons per minute, which means you can run four showers and a sink simultaneously and never run out of hot water. A digital temperature control allows you to set your temperature in increments of 1 degree, so you can set the temperature to how you like it. The ECO 36 is the most powerful model from our full line of tankless water heaters, with the capacity to handle a large single-family home. Take a look at our full line of tankless water heaters below to see whats perfect for you. THIS MODEL REQUIRES 150 AMPS DEDICATED!

• Sleek and compact design with digital output temperature display
• ECOSMART tankless water heaters are 99.8-percent energy efficient
• Manufactured in United States
• Pipe Fittings:3/4 inch NPT
• Required Breaker:4 x 40 A
• 150 A

User questions & answers

Question:	What model is recommended for whole house
Answer:
Question:	I live in lower michigan and what model is recommended for whole house
Answer:
Question:	Why are these so much less expensive than other name brand tankless heaters
Answer:
Question:	Even with 200 amp. My lights flicker with the water is in use. Any one having the same issue and how was the issue resolved? Thanks
Answer:

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

This Smart Technology electric tankless water heaters is configured for climates where incoming water temperature can reach as low as 37 Degree. The ECO 24 is capable of heating nearly 3-Gallon per minute at this temperature. This model is well suited for homes in the Northern U.S. and Canada and in the southern U.S. that have large Roman-style or Jacuzzi tubs and that have generally more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

From the Manufacturer

This Smart Technology electric tankless water heaters is configured for climates where incoming water temperature can reach as low as 37 Degree. The ECO 24 is capable of heating nearly 3-Gallon per minute at this temperature. This model is well suited for homes in the Northern U.S. and Canada and in the southern U.S. that have large Roman-style or Jacuzzi tubs and that have generally more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design.Activation flow 0.3 GPM
• ECOSMART tankless water heaters are 99.8-percent energy efficient
• 100 A

User questions & answers

Question:	I understand this unit, the ECO 24, requires 3 - 220 (double) breakers. What amperage for each
Answer:	40 amp 240v breakers (2 pole breakers)
Question:	Will this Eco 24 system work with a dedicated 100A sub-panel off a 200A service panel
Answer:	I'm not an electrician, but in your situation, all the power is coming from the main service panel. You should consult with an electrician to calculate your maximum load. I've had no issues with my Eco 24 running 3-40 amp breakers off a 200 amp service panel. If you have a heat pump you could be pushing the limit at certain times. Be safe, consult an electrician.
Question:	will this work to fill up small jacuzzi
Answer:	Hello Oscar. This unit is not intended for a Jacuzzi due to the flow rate that the Jacuzzi requires. Instead, Ecosmart manufactures a product specifically for this. It is the Smart SPA and we have it for sale on our Amazon store. GadgetsGo is an Authorized Ecosmart Dealer.Kind Regards,Ross GadgetsGo
Question:	i have 6 bathrooms, 2 laundry rooms will one do the job? or i need two
Answer:	Hello Raz,Thank you for your question. I am replying in less than one hour, after business hours, to expedite your request.Actually it does not matter how many bathrooms your home has. What matters is how many points of use that you will use at the same time. So to determine whether this or any tankless heater will work, just add up the total water flow rate in gallons per minute ("GPM") of all your points of use. A shower flow rate can range from 1.5 to 2.5 GPM. A bathroom sink: 0.75 GPM. A clothes washer: 3 to 4 GPM.So, if you expect only to have one shower and one sink running at the same time, this will give you at least 105F hot water, if your incoming cold water temp is above about 55F.Please let me know if I can assist you further.Kind Regards,Ross KelsonGadgetsGoP.S. If you have found my answer helpful, please prefer us when you purchase. You will continue to get priceless service after the sale.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

The ECO line by Marey is designed using SMART Technology. It is the only one in the market that does not accumulate sediments, as the water never touches the heating element! The 220V ECO110 by Marey provides 11kW of power, being the perfect solution for 1 point of use in Southern areas (a shower and a sink). This unit provides 28°F increase at 3. 0 GPM, allowing you to have a shower and a sink running simultaneously in hot climates. The 220V ECO110 reaches 56 °F at 1. 5GPM for hot water output at one point of use at time. In colder regions, the 220V ECO110 is suitable to provide hot water for a single point of use such as a sink. Marey´s 220V ECO110 is ETL approved. It performs best in the US Southern regions where the incoming water temperature is above 70°F. This unit must be installed no more than 40 feet from the intended point of use. The complete ECO line by Marey is designed with corrosion resistant heating elements which reduce hard water build up from chlorine and calcium.

• The 220V ECO 11kW unit is ideal for 1 simultaneous points of use in US Southern Regions where the incoming water temperature is above 70°F. In colder regions, it is suitable for a sink at 1. 3 GPM.
• German-designed with high quality stainless steel water channel and heating chamber.
• SMART Technology: Easy management and simple adjustments on a LCD Panel allows you to program the exact desired water temperature thereby optimizing electricity consumption.
• Requires 60 Amp breaker and must be installed by a professional plumber or electrician to ensure safety and quality.
• Marey’s ECO line can maintain 98% efficiency level throughout their lifetime.

User questions & answers

Question:	How to instal it
Answer:	Hello Domingo. Complete installation instructions are on the official manufacturer's owner's manual here https://gadgetsgo.com/images-manual/Marey-Eco110-2016_12_27_manual.pdf GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	What is the fitting for the pvc inlet and outlet
Answer:	Hi Judy. PVC should not be used for the hot water connection. Instead use copper, CPVC, or other high-temperature rated pipe. You may use PVC for the cold water connection. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	can i use a double 25 amp *50 amps
Answer:	I think it takes a 60 amp
Question:	What size is the out put line
Answer:	Hello Cindy. Both water inlet and outlet connections are 1/2" NPT. Feel free to ask us any other questions. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo

Product description

Always dreamed of having your very own hot tub? The salsa Miami inflatable hot tub is the affordable, go-anywhere spa which can comfortably accommodateup to 4 adults! This fully portable, inflatable hot tub can be easily set up either indoors or outdoors within Min. The salsa Miami requires no tools or professional installation. With its soothing 104° F water temperature & Massage jets, the salsa Miami hot tub is perfect for soaking sore muscles, unwinding after a hard day at work or even as a luxurious & romantic treat for you & your partner to enjoy together. The digital control panel allows you to turn up the heat without having to exit the tub. The salsa Miami hot tub Also comes supplied with a cover to maintain optimal water temperature, A set up & maintenance guide DVD, filter cartridges (twin Pack) & a chemical floater. Dimensions of inflated tub: 71"X26".

• Enjoy the ultimate spa experience: receive total relaxation when you slip into this soothing portable hot tub after an exhausting day. 120 bubble jets soak sore muscles for a luxurious treat.
• Dimensions: 71" W x 26" H | Inner Size: 52" W
• Operate from inside the hot tub: The digital control panel lets you change the water temperature (up to 104 degrees Fahrenheit) and flow of the jets without stepping out of the tub. A power saving timer can even automate the temperature of the spa up to 72 hours in advance.
• Superior strength and durability: The puncture-resistant tri-tech material and I-beam construction ensures your hot tub never loses its shape and stability even when people sit on the side walls.
• Simple setup and maintenance: no extra tools are needed to setup This portable spa. Simply inflate and deflate with the spa's own pump! A cover comes with to provide safety, maintain the water's warm temperature, and keep the water Clean from debris, such as rain or Leaves.
• Made for on-the-go usage: with lift handles, the spa can be moved around with ease. This spa deflates compactly for optimal storage and transportation purposes.

User questions & answers

Question:	I want to put this indoors, what should I put under it, and do I need a special outlet
Answer:	This is a very nice little tub (I'm 6'2" and I enjoyed it). I bought a roll of reflective insulation to go under mine to aid in retaining heat. Otherwise nothing is needed under it and No special outlet. Just know there is a drain plug in the bottom. Mine never leaked and Bestway Customer Service was very good and quick to replace my heating unit when it leaked. You might want to put a HOT WATER HEATER Drip Pan under the heater (18 - 22") encase you need to disconnect the heater, it will capture the water from the pipes. Would've been great to have shutoff valves on the hoses and AIR hose!!!
Question:	How do you drain water from the tub? Is there an adaptor for a garden hose
Answer:	A garden hose adapter is provided that will allow most of the water to be drained. Once most of the spa water is drained, open the bottom drain valve on the pool floor to remove any remaining water.
Question:	how long does the unit take to heat from beginning to 104 degrees
Answer:	When I filled my spa, it took around 28-30 hours to get it to 104. Thats with the surrounding area at 45-50F degrees. The water started out at 54F degrees also, so roughly around 1-2 degrees per hour
Question:	How much does it cost for electricity to keep it hot
Answer:	Installed in my basement which has a constant temperature of 65 degrees in the Winter & 68 degrees in the Summer. My cost per kWh is $0.145. My $14.00 meter purchased through Amazon says 1$ per day to run the pump constantly, air jets on only occasionally, and water temperature automatically maintained at a constant 100 degrees. I am totally happy! I verified the kWh & cost manually by reading my house meter. Folks that paid more either have a tub located in a colder area and or have a much higher electric rate.

Product description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. Base of the pump is designed to fit the hub of a standard 6-inch floor drain. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70's, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service - Superior Pumps Built to Last!

• 1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height
• Tough thermoplastic construction; 10' cord length
• 1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter
• Removable suction screen and handles up to 1/8 inch solids
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

User questions & answers

Question:	What's the PSI or max head (pumping vertical height) of this pump
Answer:	A quick Google search of "Superior Pump 91250" yields the manufacturers specs. I do not see PSI listed but "Pumps will lift water up to 25' of vertical height" I belive answers your question...there is a chart on the "Performance" tab that shows 30 GPM at 0' lift and 2 GPM at 25' lift...with flow rates every 5' listed.http://superiorpump.com/products/utility/91250.html
Question:	Does it have an automatic shut off
Answer:	The pump does not have an automatic shut off. I added a float switch because I wanted it to pump out a sink that had a slow-running clogged drain where I had the washing machine. When the sink was mostly pumped out the float switch turned off the pump. It worked great for a couple years until I got around to dealing with snaking the drain which didn't have an easy clean-out. This is a good pump, since the sink drain got taken care of, we've been using the pump to pump koi pond water over a 5' fence to our neighbor's garden using about 150' of garden hose. The pump runs continuously for 5+ hours without issues in this process.
Question:	Will clothes washer hoses fit on this pump
Answer:	The pump itself fits a garden hose nicely. You can buy the attachment package listed next to it for the converter piece. It only came to around $8.00. It also comes with a larger hose. I didn't need it for my spa but if you need to empty a washer or bigger pool it seems like it would come in handy. Hope that helps. Good luck. :-)
Question:	Can this be user to flush a tankless heater with vinigar
Answer:	I bought the pump for this very reason. I'm not sure if it is rated to handle vinegar, but at the price I figured I'd try it and see. I have two tankless water heaters, and I wanted a pump that could clean out both at the same time and this pump certainly does the job. I have a hose that runs from the pump, into a splitter. From the splitter I have two hoses going to each water heater (one hose per water heater). Even pushing water through two hoses, it still has a strong flow, with each hose pushing about the same flow as the water hose faucet outside your house opened wide open (guestimate). The splitter I have allows me to adjust the flow rate by closing off some valves if it is too strong. For just one water heater, i would think this pump is too strong (as it REALLY moves water), but I'm not a plumber so I couldn't say for sure. If I were to do it again, I think I would have purchased the 1/4 HP pump, or even the 1/5HP for cleaning out water heaters with vinegar. I cleaned out my water heater this week for the first time using this pump. I let it run for 2 hrs, and I noticed that it got warm (about the temp of a warm-to-hot bath). I'm not sure if that is normal, but thought I'd let you know.

Product features

Superior Pump 91250 1/4 HP Thermoplastic Utility Pump

Superior Pump builds pumps that are truly Built to Last. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8 inch solids with ease. This pump is UL/CUL listed (E238091, by UL, 2019) and CSA certified (230584, by CSA, 2019)

Construction and Discharge

• Thermoplastic construction is corrosion resistant and offers years of performance and reliability.
• 1-1/4 in. NPT discharge.
• 3/4 in. Garden hose adapter.

Multiple discharge hookup options

• Easily hook up to a Garden Hose* or Discharge hose* (*not included)
• Easy to transport using the carrying handle.
• 10 ft. power cord.

Intake Screen

• Intake screen filters out debris from entering the impeller. This helps reduce the clogging and prolongs the life of the pump.
• Easily to clean and is removable.

Motor and Performance

Motor:

• 1/4 HP Superior Pump continuous duty, thermally protected - split capacitor motor

Performance

• 1800 Gallons per hour at 0'
• 1200 Gallons per hour at 10'
• 540 Gallons per hour at 20'

Product description

An Amazon Brand

• 20-micron sediment filter with KDF technology for healthier, cleaner, better-tasting water; includes 2 inline water filters (flexible hose protector not included)
• Connects to a standard water hose or faucet to filter the water that flows through it
• Durable and long lasting: can last an entire camping season; also provides pure water for gardening, planting, and other outdoor activities
• Filter Service Life: 1350 gallons
• Product Dimensions: 10.7 x 2.5 x 2.5 inches each (LxWxH); backed by an Amazon Basics 1-year limited warranty

User questions & answers

Question:	Does this filter remove calcium and lime
Answer:	No, this cannot remove them.
Question:	How does this one compare to the camco water filter
Answer:	I use them to prevent water spots while washing vehicles. I didn't notice any difference in effectiveness there. I did notice a drop in pressure (compared to no filter) with the Amazon Basics one... need to switch back to camco to see if there's a difference (I simply don't remember). Both work equally well for removing hard water spots and have plenty of pressure. The Amazon one had a splash of black crud upon first usage (camco didn't).... but I know you're supposed to flush all of these before use.
Question:	Does this product remove Chlorine and / or Flourine
Answer:	It will remove much of the chlorine, however many municipality used chloramine these days which it will not remove. In order to remove flouride you must do reverse osmosis.
Question:	Does anybody know how many gallons this is good for, and please don't answer "don't know" or "doesn't say", let somebody else answer if you don't know
Answer:	The amount of gallons is good for will be effected tremendously by local water condition, we suggest solid service life will be 3 months. Hope it helps.

Product description

Regular use of Leisure Time Defender will prevent mineral buildup from occurring, which can cause the spa's heater or equipment to fail. This stain and scale control chemical is the perfect follow up to Leisure Time Metal Gon and can be applied at start-up. Compatible with all hot tub sanitizing chemicals and spa sanitizing chemicals, this hot tub defender will keep you enjoying your relaxing time in the water all season long. About the Brand: Leisure Time was developed for use in spas, hot tubs, and jacuzzies. Our water care products are both economical and powerful enough for the toughest jobs. Within Leisure Time’s wide selection of products, we offer everything from algaecides and deposit control formulas to non-chlorine shock treatments, powerful surface cleaners, clarifiers, enzyme-based cleaners, and more. If you like using Leisure Time, check out some of the other similar brands from our parent company, Sigura. With brands like HTH, Applied Biochemists, GLB, Spa Selections, and PooLife, Sigura has a long heritage and more than a century of experience in developing innovative water treatment solutions for use in pools, lakes, ponds, hot tubs, and more. At Sigura, we have an unparalleled passion, pride, and commitment to delivering superior water treatments that improve the environment and enhance the security, health, and safety of the global communities we serve. With our track record of innovation and simple, intuitive solutions that anticipate needs, Sigura customers feel more secure as they enjoy their pools, spas, ponds, and lakes.

• BENEFITS: Prevents scale formation; removes existing scale; helps prevent precipitation of dissolved solids in spas and hot tubs
• USE: Weekly application for continued protection from scale
• COMPATIBILITY: Chlorine, bromine, ozone and biguanide sanitizers
• FEATURES: Protects spa surfaces and equipment; ideal for use at start-up of hot tub or spa; able to be used with Leisure Time Metal Gon
• INCLUDES: 8 fl oz of hot tub cleaning chemicals

User questions & answers

Question:	Can this product be used in a toilet? We live on a well and have some scaling build up ring in the toilet. Will this harm porcelain or septic system
Answer:	Each order comes with 6 package, each is 2.5 oz
Question:	Is Defender the same as bright and clear
Answer:	There are 6 cubes that comes in each pack.
Question:	can i use this product with a copper ionizer system? Have never had calcium scale before with ionizer, think maybe my well water has become harder
Answer:	I believe they are parraffin.
Question:	Can you use this product with a product like Medicine Springs minerals, which is essentially a re-created hot spring mineralized formulation
Answer:	it lasted a while, not very good wax melts.

Product features

Leisure Time Defender (B)

Leisure Time Defender was developed to help prevent scale formation.

Key Features

Defender was uniquely developed to prevent scale formation, aid in the removal of existing scale and help prevent precipitation of dissolved solids in spas and hot tubs.

When do I use it?

Use this product when the water is cloudy and weekly for continued protection from scale.

How to use/how much?

For spas up to 800 gallons, use 2 oz. For spas over 800 gallons, use 4 oz. Add recommended dosage directly to spa. Turn on filter system and allow to circulate for 1 hour.

Want to get the most out of your spa?

The Leisure Time spa Facebook page will help you do just that. From opening your hot tub to relaxation techniques, we’re here to help you make spa maintenance simple. So sit back, relax and join us for products, advice, and of course, amazing spas.