13 best chemical rust removers

• ✅ NEW IMPROVED FORMULATION RELEASED JUNE 2019 - Adam’s Iron Remover is a special product that has the chemical ability to help remove Iron(III)oxide particles from your vehicle’s paintwork without the need to do so mechanically. When Adam’s Iron Remover hits your paint, it loosens up these particles and allows you to easily and safely rinse them off.
• ✅ PROTECT AND REMOVE HARMFUL FALLOUT - Bonded iron contamination can embed itself into the surface and cause harm to your vehicle’s fragile finish. When using a clay bar to cleanse your paint, you’re only removing the surface contaminants and not the after-effects or below-surface grime. Iron Remover targets those unwanted items.
• ✅ SAFE ON ALL PAINTED SURFACES, INCLUDING WHEELS - Simply rinse your vehicle down and spray Adam’s Iron Remover to any painted surfaces, whether ceramic coated or not, and watch as your paint “bleeds” purple and removes the harmful iron deposits from your finish. Avoid using it on your trim & metallic surfaces.
• ✅ REDUCED SCENT, ACID-FREE, AND RICH ORANGE COLOR - Many iron cleansers on the market contain an ingredient that can be putrid after repeated use, but Adam’s Iron Remover is a pH neutral formula that is safe on clear coat and single stage paint. This improved formula activates quicker on contact and will not stain your trim like our old formula. However, you still need to minimize overspray and avoid it on your exterior plastic, trim and metallic parts.
• ✅ 110% SATISFACTION GUARANTEE AND USA MADE - At Adam’s, we strive to bring the BEST fallout remover, detailing kits, waxes, sealants, ceramic coatings, car accessories, microfiber towels, and top of line cleaning products to our customers. If you don’t agree, let us know and we’ll do everything we can to make it right!

Product features

Why Every Car Owner Needs Iron Remover

With every mile traveled, our vehicles are faced with road debris, dirt, and weather that's out of our control. Even when our vehicle is parked outside, it still continues to fall victim to harmful ferrous brake dust particles in the air, rail dust, or industrial fallout. If not removed, these contaminants dig into your paint for rust. They also have a nasty habit of causing imperfections as they drag across your surface paint while washing or detailing, thus swirls & minor scratches.

Simply Spray, Then Rinse - Activates Fast On Contact

Adam’s Iron Remover is a special product that has the chemical ability to help remove Iron(III)oxide particles from your vehicle’s paintwork without the need to do so mechanically. When Adam’s Iron Remover hits your paint, it loosens up these particles and allows you to easily and safely rinse them off.

Ready-To-Use Formula - No Diluting Necessary

This product is formulated to the exact concentration that allows it to attack all surface contaminants without harming your paint. The chemical formula is powerful, it will target & remove all iron particles. After a couple of minutes, the paint will start to “bleed” purple – this is a good thing, showing that the chemical is hard at work removing any embedded contamination that may not be removed as easily with a clay bar or clay mitt.

Changes Color When Making Contact With Iron Particles

Immediately after spraying, you quickly see an amber/orange-colored product within the bottle, turn purple. When Adam's Iron Remover comes into contact with iron particles, it quickly attacks and turns stubborn contaminants into a purple liquid form that safely washes away from your finish.

Spray

Using an Iron Remover is essential when heavy decontamination is required such as before applying a ceramic coating. If you plan on applying a ceramic coating, we recommend using Adam's Strip Wash (removes car wax & sealants), Iron Remover, Clay Bar & Graphene Ceramic Coating.

The objective of decontaminating your vehicle is to cleanse your pain of harmful contaminants. Adam's decontamination spray ensures that there are no more hidden contaminants stuck to your paint, even after using a clay bar or clay mitt.

Allow To Activate

After spraying Adam's Iron Remover on your vehicle, you will notice that it actives fast on contact. In about 2-5 minutes, the paint will start to “bleed” purple – showing that the chemical is hard at work removing any embedded contamination that may not have been removed with a clay bar. In this stage, the ammonium thioglycolate is reacting to ferrous metals by pulling them off the panel so they can be rinsed away.

Rinse Away

The final step of the decontamination process is to rinse clean the liquified residue from your paint and car windows.

Use As Wheel Cleaner:

Iron Remover can also be used on wheel surfaces, however, it is recommended to use Adam’s Wheel Cleaner as it’s a thicker, more concentrated formula. Adam's iron remover strictly removes iron – that’s it. So don’t expect your neglected wheels to come up perfectly clean by just using Iron Remover by itself.

About Adam's Car Wash & Car Cleaning Supplies

When Adam Pitale founded Adam's Polishes, he wanted to create a detailing culture that changed the way people cared for their vehicles. Adam's objective was to take what use to be considered a chore, simplify the process, and make car care enjoyable for everyone!

When you receive an Adam's product, you are getting a premium product that has gone through an extensive and rigorous development process. Adam's products are not mass-produced and each is carefully formulated with special blends of high-quality polymers, acrylics, and waxes. Since 2000, Adam's Polishes has obsessively researched, tested, and sourced only the highest quality ingredients for our products. With each chemical, we do everything in our power to formulate the perfect ratios to bring out the best in your vehicle.

We constantly reevaluate and test our blends to ensure that we are offering you the most technologically advanced and safe products available. Adam's Polishes is dedicated to bringing you the best cleaners, towels, accessories, waxes, and coatings to outshine and outlast any product you've used on your vehicle - That is an Adam's Promise!

Product description

Instantly removes calcium deposits from glassware, decanters, tea and coffee pots. Instantly removes lime scales from coffee makers, humidifiers, tubs, toilets and sinks. Instantly removes rust stains from stucco, brick, porcelain, chrome and metals. CLR is a powerful formula for dissolving tough calcium and lime deposits and surface rust stains from tubs, toilet bowls, sinks, glass, chrome, fiberglass and stainless steel. CLR is septic safe and contains no phosphates.

• Industrial Strength: CLR Calcium, Lime and Rust Remover is a non-toxic, multipurpose cleaner designed for bathrooms or kitchen-related surfaces. It breaks down calcium, lime and soap scum to leave behind a streak-free shine
• Fast Acting: Quickly removes calcium, lime and hard water deposits, soap scum, discoloration and dirt. Cleans and shines stainless steel, countertops, tubs, showers, tile, fixtures and sinks
• Multi-Purpose: Versatile cleaner for home or office surfaces. Use on plastic, ceramic tile, glass, stainless steel, faucet and shower fixtures, shower doors, fiberglass, toilet bowls and sinks
• EPA-Certified: CLR Calcium, Lime and Rust Remover is part of the EPA's Safer Choice Program recognizing the product as a safer alternative to chemicals and contains no phosphates, ammonia or bleach. Safe to use around kids and pets
• Fight the Clean Fight: CLR offers products for all of your household needs including Healthy Septic System, Spotless Stainless Steel, Brilliant Bath, and Clog-Free Drain

User questions & answers

Question:	How long can you leave CLR in the toilet
Answer:	It still works.. I pour some on it. Then put a rag soaked with EvapoRust on the area. let sit for a while. Then I occasionally rub the surface and see how it looks. keep the rag with evaporust fairly wet. (If possible place item or area in a plastic bag, or make a "bag: using saran wrap around rag and area you are working on.
Question:	does anyone know if CRL can be used to clean painted walls
Answer:	I'm a dive master and certified tank inspector. If you have rust in your tank you should have it professionally inspected. You "could" use this but if there is pitting or other dammage it would cripple the tank and potentially make it unsafe to fill. Not sure about any residue this might leave that could contaminate the air, so I would say probably better stick to tumbling to remove light rust. Your dive shop can do this or should know of a service center that can.
Question:	Can it remove rust stains from clothes
Answer:	Yes, like a charm, but test your surface first.
Question:	Will clr remove rust stains from carpet
Answer:	Yes, but you will probably have to apply a coat of wax afterwards.

Product description

Powerhouse Pumice cleans tough stains in seconds using a gentle abrasive action. Use on surfaces such as toilet bowls, tubs, sinks, tile and other porcelain fixtures. Can also be used on some steel surfaces such as BBQ grills, gardening tools, workshop tools, and more but always test a small section first to determine scratch resistance. Removes difficult stains such as calcium, limescale, rust and hard water buildups. Powerhouse Pumice is more than 20% more dense than similar pumice products, so Powerhouse Pumice lasts longer and cleans better. Powerhouse Pumice also has finer abrasive grit than similar products to prevent deep scratching. The heavy-duty protective handle protects your hands as you clean, and Powerhouse pumice comes with a convenient storage case. It is an abrasive cleaner. Abrasive cleaning products may cause scratching of softer surfaces. Test it first on a small area. Powerhouse Pumice is a chemical-free, odorless, non-toxic cleaner, so it is environmentally friendly and safe around children and pets. To use Powerhouse Pumice, first wet the stone and then gently rub the pumice over tough stains. The pumice will conform to the shape of surface or bowl and removes tough stains in seconds. If you have ever unsuccessfully tried to clean hard-water, calcium, lime or rust stains, you need Powerhouse Pumice. It cleans like never before!

• INCLUDES STORAGE CASE – NEW!! Now Powerhouse Pumice comes in a sturdy storage case! When finished with cleaning toilet bowls, sinks, tubs, tile or other surfaces, simply rinse and store in the convenient case. Includes air vents to allow drying.
• REMOVES STUBBORN STAINS QUICKLY AND EASILY – Power through calcium deposits, limescale, hard water rings, iron deposits, rust stains, and more on toilet bowls, tubs, sinks, tile and other porcelain and ceramic surfaces. Plus, it’s more than 20% more dense than similar products to last longer and clean better.
• ECO-FRIENDLY CLEANER – Tough enough to remove stubborn stains yet is chemical-free, odorless, non-toxic and eco-friendly ... it is made from recycled materials.
• PROTECTS YOUR HANDS – Includes a heavy-duty plastic handle to easily grip while cleaning…no gloves needed! Just use gentle back and forth motions to remove stains and deposits. The fine-grit, white pumice stone leaves behind no residue on surfaces or on your hands.
• CLEANS MULTIPLE SURFACES – Use on toilet bowls, tile, sinks, tubs, and other porcelain or ceramic surfaces. Also cleans baked-on food from BBQ grills, dirt and grime from gardening tools, rust from workshop tools, as well as other surfaces. NOTE: test on small area to determine scratch resistance.

User questions & answers

Question:	Is this product safe on colored porcelain toilets
Answer:	We used the lysol brand of this product in our tanks and all of our toilets started leaking (would refill when not being used). The plumber that replaced the insides told us they wear the parts inside the tank over time especially the rubber parts. I quit using them after getting new insides but I miss them because they worked well. Just found some that hang over the edge of the toilet bowl inside the bowl. I'm giving them a try.
Question:	Will it remove thick urine salts crusted in toilet bowl? The crusts are narrowing the exit and impede flushing! Where the toilet brush does not reach
Answer:	2-24 oz. bottles, totaling 48 oz. together.
Question:	will it clean fiberglass or acrylic tubs
Answer:	Nothing on the packaging talks about septic systems. I did note, however, that it contains no phosphates. I had a septic system for over 28 years, and never had a problem with any toilet bowl cleaner affecting the system.
Question:	Has anyone had success using this product to remove hard water deposits in a toilet bowl
Answer:	the ingredient bleach is not on the label.

Product description

Rust Remover Stick Toilet Bowl Iron Stain Remover Mineral, Lime & Rust Remover For Stained Sinks, Bathtubs, Urinals, Tile, Grout, Natural Pumice No Chemicals Like CLR or Lime Away

• Rust Remover Stick Toilet Bowl Iron Stain Remover Mineral, Lime & Rust Remover For Stained Sinks, Bathtubs, Urinals, Tile, Grout, Natural Pumice No Chemicals Like CLR or Lime Away

Product description

Zap is a safe and powerful rust and oxidation remover. Quickly removes rust and corrosion from steel, cast iron and other ferrous metals. Does not harm nonferrous metals such as aluminum, copper or brass and is also safe on rubber and plastics. Quickly penetrates into crevices and metal pores due to special wetting agents so that all rust and corrosion is reached.

• BEST VALUE – 1 Use Per 10,000 Gallons of Water (2 Uses Per Container, 2 Containers Included), Our 2 Pound Engineered Powder (2PK) Can’t Be Beat On Price! We Have Developed a Natural Fast Acting Remedy to Eliminate Stains for Pools, Spa’s & Even Hot Tubs. One Bottle Will Work Up To 20,000 GAL Of Water!
• SAFE, NATURAL & HIGHLY EFFECTIVE – NO HARSH CHEMICALS, Stay Confident In Your Pool Knowing That Our Pool Stain Remover Does Not Use Any Harsh Chemicals. We Bring Convenience Back To Standard Maintenance, Our Special Natural Formula Does Not Alter Chemical Balances
• EASY TO APPLY – Citric Acid Base, Compatible With All Sanitizing Systems, Works Perfect On Vinyl Liners, Fiberglass & Even Metal Surfaces. Simply Follow Our Instructions Based On Your Needs – Fights Both Specific Stained Areas & Problematic Water Discoloration
• LIKE NEW FINISH – Impress Your Neighbors And Friends Alike With Your Like-New Appearance Of Your Aged Swimming Pool! Improves Surface Quality Appearances & Deeply Penetrates Long Lasting Stubborn Stains With Ease
• PROUDLY MADE IN THE USA! - We Believe In Quality, That’s Why We Have Engineered, Tested And Manufactured, Our Pool & Spa Stain Remover Right Here In The USA. We Stand By All Our Products, Essential Values Ensures Best Quality, Or Your Money Back!

User questions & answers

Question:	For stains on the liner, do I put the pump in recirculation mode and run for an hour? or keep it in filter mode and run for an hour? or neither
Answer:	Yes. I have a porcelain sink and it works nicely removing stains and spots
Question:	You have to add a "pulp based cartridge filter treatment" per the instructions? what does that mean? I have a fiberglass pool with a sand filter
Answer:	Never use bleach to clean mold. Doing so only allows for the regrowth of mold, as well as releasing powerful and toxic mycotoxins into the air. There is scientific evidence of this.
Question:	Can this be used on painted concrete pools
Answer:	They are great for tile, tub and wall cleaning. I do not think they would be that effective alone on the bottoms of pots and pans. Maybe with a soft scrub cleanser or pot cleaner. This magic eraser last much longer than the original.
Question:	Will this remove serious copper stains from Pool Rx that uses copper sulfate to remove algae
Answer:	Yes just enough and not over. They are wonderful. I keep them under bathrooms sink and kitchen sink. Fantastic to gentle but thorough clean on my black stove that gets very dirty. It is also for the micro wave. You will love how quick it cleans.

Product features

Swimming Pool & Spa Stain Remover

Instead of using harsh chemicals that spoil your pool and bathtubs, start using Essential Values’ stain remover made from the special natural formula. Our citric acid-based cleaning powder removes stubborn stains and rust without damaging the surface of your pool. Our stain remover will not only clean but also improve the surface of your tub or the pool. Works perfectly on Vinyl liners, Fiberglass, and even metal surfaces.

Essential Values is committed to providing quality products to its customers for a stress-free experience. To us, quality is everything, which is why we take into consideration your feedback and engineer our products to perfection! A proud ‘Made in USA’ company that strives for a better clean future everybody.

Acts Swiftly and Easy to Use

Cleaning your pool does not have to be a tiring task. That is why we simplified things for you.

1. Balance your pool before use (gives best results at pH level of 7.2)

2. Add pulp-based filter aid to cartridge and sand filters.

3. Lover chlorine levels to 1ppm or less for best results.

4. Apply Essential Values Stain Remover to stained areas.

5. Use half bottle for 10,000 gallons.

6. For water discoloration, set pool to recirculate mode, & let run for an hour.

7. Let sit for 12 hrs, brush walls & floor thoroughly.

8. Vacuum the pool out to remove residue and sand.

9. Test & rebalance water back to normal levels. Enjoy your pool time!

Product description

This product can be used Indoors or Outdoors. This is safe on glass, aluminum, painted surfaces, fiberglass, stucco, brick, porcelain, brass and copper. Instantly removes hard water spots and rust stains caused by sprinklers, calcium deposits and stains, soap scum, lime deposits, corrosion, tarnish, grease and oil.

• Natural organic salt formula
• Instantly removes calcium, rust, lime, hard water spots, soap scum, corrosion and more
• Use on fiberglass, plexiglas, tile, stainless, glass, porcelain, painted surfaces and more
• Spray on and wipe off for instant results
• Special Shipping Information: This item cannot be returned and has additional shipping restrictions.
• Natural organic salt formula

User questions & answers

Question:	can flitz be safely used on automobile bodies
Answer:	Not sure - the refill I bought ( this one) did NOT fit my mop
Question:	Will it take the finish off rubbed bronze
Answer:	Thank you for your question. Unfortunately we do not have any regular cellulose sponge refills that would fit this Mr. Clean Magic Eraser Extra Power Squeeze Mop. If you are interested in a Magic Eraser Mop our Mr. Clean Magic Eraser Roller Mop (446840) does have a regular sponge that can be purchased to be able to switch between the two types. The regular Mr. Clean sponge is our Mr. Clean Heavy Duty Roller Mop Refill (446391). If you have any additional questions please reach out to a member of our team. We can be reached Monday-Friday 9AM-5PM EST at 1800-493-2205 or email us at [email protected]. Thank you.
Question:	Can it be used for aquariums
Answer:	no idea. I had trouble finding replacements to fit.
Question:	can I use this on Marble in my shower
Answer:	I don't know but this product didn't fit my mop either!

Product description

A rust removing soak that safely removes tough rust from metal parts and tools. WD-40 Specialist Rust Remover Soak quickly dissolves rust and restores tools, equipment, and surfaces to bare metal without chipping, scraping or scrubbing. Great for removing rust from tools, metal, cast iron, chrome parts, and more without harming paint, gaskets, trim, or other surrounding parts. This non-toxic and biodegradable rust-removal formula does not use acids or caustic chemicals and is safe to use on most metals. To remove light rust, leave parts in the solution for 1-3 hours. To remove heavy rust, leave parts in the rust removal solution overnight. Do not use on parts that have bluing, browning or protective oxide paints, as those protective coatings would be removed. * Ideal for use on auto restoration, tractors, antiques, farm equipment & implements, trailers & hitches, and rusty tools * Non-toxic and biodegradable * NSF Category P1 (#146753)

• Wd-40 Specialist Rust Remover Soak, One Gallon
• Dissolves Rust And Restores Old Metal Or Parts. This Non-Toxic Soak Made With Biodegradable Ingredients Helps Make Old Metal Look New Again Without Scraping, Chipping, Or Scrubbing. Get Your Tough Job Done Right
• Wd-40 Specialist Line Is Designed With Industrial-Strength Quality And Extreme Penetration For Your Hard To Solve Issues
• Safely And Effectively Removes Rust Without Acids Or Caustic Chemicals. It Is 50-State Voc Compliant And Nsf Category P1
• Ideal For Use On Auto Restoration, Tractors, Antiques, Farm Equipment & Implements, Trailers & Hitches, And Rusty Tools

User questions & answers

Question:	Can I use this in my car's radiator
Answer:	Brake rotors on what? If it's a car or truck then just go apply the brakes hard a few times or until the oxidation clears up. If it's really severe then you may have to replace the pads. If it's really, really corroded you may have to replace the rotors. If the rotors are on a bike or motorcycle and you're trying to make them look pretty - it will probably work. But remember, while Quick-Glo is a mild polish, it is also going to leave a protective (waxy) finish on the metal and this will wear off with the friction generated by braking. That's all I,ve got. I hope it helped.Long time Quick-Glo user (since the '60s). - Gordon
Question:	How does this compare to evapo-rust? the wd costs about 20% more... is it worth the extra money
Answer:	Yes but ... it really depends on the thickness of the rust for one and I don't know if any paint or surface finish would stick to it when you're done. I did use it on some sixty year old, chrome plated rims off of a MotoLegara, Moto Guzzi as a final shot before I bought some new rims. It worked, took the rust down to the pitting on the metal and seemed to seal the finish with a wax coating. This little bike is more a less a parade / special even bike and no longer a daily rider. I really don't know about body surface rust however ...
Question:	How does this product compare to using distilled white vinegar
Answer:	Yes, it's a fine product.
Question:	Does it harm non-ferrous metals
Answer:	I can't find my jar of Naval Jelly to read the facts for sure, but I used it on my porcelain bathtub where it had rusted at a seam and it did a great job, but I watched it closely as I did it. I just read the recommendations on line for what NOT to use it on, and it says it is not to be used on Cement, Fiberglass, Chrome, Aluminum, Plastic or Marble. I hope that helps you. If you are at a hardware store, or even Walmart, take a look at a jar of it and see if it recommends that it be used on ceramic tile or porcelain. (Then come back to Amazon to buy it where you get the best buy. One jar did a whole patio table and four chairs for me last summer!).

Product features

WD-40 Specialist Rust Remover Soak

WD-40 Specialist Rust Remover Soak quickly dissolves rust and restores tools, equipment, and surfaces to bare metal without chipping, scraping or scrubbing. Great for removing rust from tools, metal, cast iron, chrome parts, and more without harming paint, gaskets, trim, or other surrounding parts. To remove light rust, leave parts in the solution for 1-3 hours. To remove heavy rust, leave parts in the rust removal solution overnight.

WD-40 Specialist

Whether you need the original blue and yellow can with thousands of uses, or a WD-40 Specialist penetrating oil, lubricant, cleaner, or solution to protect against or remove rust, we’ve got you covered. Get the job done right with a range of products – WD-40 Multi-Use Product, WD-40 Specialist and WD-40 BIKE – and live life hands on.

Product description

Pool Mate Metal Out is especially formulated to help prevent discoloration of pool water due to iron, calcium, magnesium, copper and other minerals and metals. This product is particularly ideal for pools using well water or in regions where heavy metals are naturally present in the water. With regular use, Pool Mate Metal Out is ideal for controlling general stains and helps maintain a sparkling clean pool. This product helps prevent discoloration of pool water due to iron, calcium, manganese, copper and other metals and minerals which may be present in the water supply. This product is an excellent general purpose sequestrant which helps protect plumbing and pool walls from rust, stain and scale. It should be used for all pool openings and closings and throughout the season as needed. For initial filling of pool, if iron or other metallic contaminants are suspected, add one quart of this product for each 10,000 gallons of pool water. Add this product while the pool is being filled and before chlorine is added. To correct an existing colored water problem due to the presence of minerals in the pool water, first close the pool to all swimmers. Leave the filter pump running. Stop chlorinating the pool and allow the chlorine level to drop to zero. Lower the pH of the pool water to 6.8 with a pH decreaser. Lowering the pH will redissolve the metallic impurities. Add one quart of this product per 10,000 gallons of water and allow the pool water to circulate overnight, or until the water is clear. Readjust the pH of the pool water between 7.2 to 7.8 with a pH Increaser. Begin normal chlorination and pool operation. Swimming may resume when chlorine residual is 1.0 to 3.0 ppm. To make up for loss of this product due to backwashing and/or splash-out, add one quart of this product for each 20,000 gallons of pool water, once each month.

• This product helps prevent discoloration of pool water due to iron, calcium, manganese, copper and other metals and minerals which may be present in the water supply
• This product is an excellent general purpose sequestrant which helps protect plumbing and pool walls from rust, stain and scale
• It should be used for all pool openings and closings and throughout the season as needed
• 1 quart per 10,000 gallons

User questions & answers

Question:	Will this removed Black Algae stains
Answer:	I don't see why not
Question:	Can it be used on fiberglass pools
Answer:	I have not seen any stain improvement using this product.
Question:	Can you use Nature 2 cartridges after using this product to clear the water
Answer:	SanDisk SDHC card will work fine in P900 you will need to format disk in camera before use this is normal even when new right from the start. Keep in mind that formatting will wipe the disc clean off even from the start
Question:	Does this remove the stains on plaster pool walls, thanks ed
Answer:	this SanDisk card should work with Nikon L340 but it needs to be formatted just scroll through menu on Nikon and find format option and let the device format the disk for that camera. If there are any images on disk formatting will wipe them clean off. only takes a few seconds and then disk will be ready to go

Product description

RUST-BLOCK is a revolutionary water-based rust inhibitor that works on all ferrous metals and is ideal for home or shop use. Rust Block is a specially formulated water based rust inhibitor designed for long-term protection and easy removal. Rust block can be applied through immersion, spray or wipe. It dries at the same rate as water leaving a thin non-tacky film that inhibits rust for up to a year. Treated parts must be stored indoors. Rust Block is removed from parts with a simple water rinse and does not require a chemical cleaner or solvent. This product contains only biodegradable surfactants. RUST-BLOCK prevents your items from rusting for up to 1 year. Use it to protect your tools, auto parts, hardware, gardening gear and more. Also, it is ideal for industrial use. RUST-BLOCK is non-corrosive, non-flammable and biodegradable. When you are ready to remove the invisible coating, simply rinse it away with warm water. Then, your item is ready to paint, primer or oil.

• Revolutionary water-based rust inhibitor that works on all ferrous metals and is ideal for home or shop use
• Non-corrosive, non-flammable and biodegradable, Let the Rust-Block do all the work for you without having to use any gloves, masks or protective eyewear
• Safe for use on all auto parts, tools, sporting goods, grills, hardware, lawn and garden equipment and more
• Contains NO VOCs, acids, solvents, petroleum, waxes
• Safe for use on all Auto Parts, tools, sporting goods, grills, hardware, lawn and garden equipment and more
• Contains No Acids
• Non-Toxic

User questions & answers

Question:	It says for indoor use, is a non air-conditioned garage considered indoor? I want to use it on my vise Jaws to keep them from rusting
Answer:	These are not designed for use on fabric. The Mr. Clean Team
Question:	Is this safe to use in an oven or on a stovetop over a pilot
Answer:	Yes. Use light pressure when using on vinyl. If the vinyl has a shiny finish or is textured, scrubbing too hard may remove the finish or the texture. -The Mr. Clean Team
Question:	Does evapo-rust remover have to dry before applying this? rust appears instantly on a cast&black iron project before it dries after removal
Answer:	Yes our Magic Erasers will work on leather, but we recommend using light pressure only. -The Mr. Clean Team
Question:	Does this leave any color residue
Answer:	Mr. Clean Magic Erasers do not contain latex. The Mr. Clean Team

Product description

Turtle Wax is the number one selling brand of car care products in the world with sales in 90 countries. Founded more than 60 years ago in Chicago, the company is recognized for manufacturing appearance and performance car care products for the retail consumer market and the commercial car care and professional detailing industries.

• Transforms rusty, tarnished chrome to its original gleaming luster
• Works great on chrome bumpers, wheels and accessories
• Leaves a protective coating to prevent future oxidation
• Can be used with cotton, microfiber or foam pads
• Can also be used on black rubber and plastic trim

User questions & answers

Question:	Will this enhance the chrome on the car window trim
Answer:	Donna, there should be a Velcro piece at the end of the handle that hooks the Magic Eraser pads. If you are having any issues I have the toll free number for the manufacturer 1.888.318.8521.
Question:	faucet water stain
Answer:	No. Clorox has something else on the pad to make it work with the handle.
Question:	will this product remove salt spots from my chrome rims
Answer:	This does not come with the extendable pole
Question:	Can this remove tint scratches (not even finger nail deep) off my black rims? And can it remove rust off my quarter panel (my car is white
Answer:	I bought the brush for someone else (for my in-laws), so that they could brush pine pollen off their patio (rattan) chairs in South Carolina, so I don't have the brush at hand and thus can't really help you, I'm afraid. As a counter brush, I would expect it to have fairly soft bristles; counter brushes are really for cleaning off sawdust and the like from counters, tools, etc. Stiff bristles would leave a lot of dust behind.

Product features

Turtle Wax Chrome Polish & Rust Remover

• Superior cleaning power restores luster
• Easy to use formula removes surface rust & grime
• Leaves a brilliant, mirror-like-shine

Product description

Chemical Guys Vintage Heavy Metal Polish is a specialty metal polish designed to restore the brilliant shine to any metal surface. The all new Vintage Heavy Metal Polish is formulated with specialty cleaners to remove contamination and imperfections while restoring gloss and clarity. Chemical Guys Vintage Heavy Metal Polish works great to restore chrome, stainless steel, copper, aluminum, brass, silver and gold metalwork. Their unique micro-polishing formula safely polishes metal for a vibrant shine. The advanced protective polymers in Chemical Guys Vintage Heavy Metal Polish removes stains and contaminates that can dull the finish. Heavy Metal Polish is perfect for polishing diamond plate and precious metals. Quickly and easily restore the original shine to your metalwork with Chemical Guys Heavy Metal Polish. Perfectly polished metalwork is the best compliment to any car, truck, boat, or motorcycle. Chemical Guys Vintage Heavy Metal Polish helps to achieve the brilliant shine that any detailing enthusiast enjoys. Simply apply a few drops of Vintage Heavy Metal Polish to a premium microfiber applicator pad and gently work into any chrome, aluminum, stainless steel, silver, gold, or copper surface to reveal a bright, high gloss shine. The advanced micro-abrasive technology quickly cuts through oxidation to produce a beautiful finish. Chemical Guys Vintage Heavy Metal Polish can also be used with the Chemical Guys Ball Buster System for even faster results when polishing wheels, diamond plate, and large metal surfaces. Vintage Heavy Metal polish is formulated with protective polymer technology that protects your metalwork from stains and oxidation.

• Heavy Metal Polish cleans and restores all metal surfaces
• Great for chrome bumpers, stainless steel exhaust tips and aluminum trim
• Removes light rust stains and oxidation from metal surfaces including billet wheels
• Cleans and brightens diamond plate metal work
• Works well when topped with Chemical Guys Light Metal Polish to protect your metal's shine

User questions & answers

Question:	Is this conductive
Answer:	Absolutely! I use it on my chrome fixtures in the bathroom Also may sound strange I use it on my mirror in the bathroom. Just make sure you follow the directions on the bottle you should be fine again just my opinion here Rick
Question:	Will this work good on a car window trim.. i drive a g37 and my door trim is looking alittle dull from the sun
Answer:	This product is formulated to clean, shine and protect automotive chrome pate without being abrasive. On aged or distressed chrome, it would be recommended to test in an inconspicuous area if that's possible, but it is a gentle polish and on chrome plate that is intact is is completely safe. Keep in mind that this is an automotive polish and not a household polish, but the chrome plated metal process would be the same on either. Should you have any automotive-related questions about this product, or any other Mothers automotive product, please feel free to contact me. [email protected] Mothers Tech Support
Question:	will this work on stainless steel exhuasts
Answer:	If they are chrome it will work great!
Question:	Is dis good for removing rain spots off chrome rims
Answer:	This is cotton wadding that has been treated with some oil based solvent (something like WD-40?) I once got a can of this in a grocery store auto section but it was dried out and it is useless then. It will turn black as it removes the oxidation but just keep re-folding it to expose clean areas. You can get a lot of mileage out of this stuff. I'm a fan and have used it mostly on chrome. It will also take dried tar of non-ferrous metals . I did use it on old alloy wheels - mostly aluminum, right? - and they went from dull grey to reflecting my hand almost like chrome. I keep Q-Tips in the can and they absorb some of the solvent for use in small areas. But I think the shining effect is less dramatic when the surface is not really smooth to start with - like screen door frames. My alloy wheels probably came out of the factory buffed and smooth as a baby's butt. It is a lot of manual rubbing tho. It dries to a white residue then comes off easily with terrycloth. You'll probably want to wear gloves cause it's oily but not caustic in any way.

Product features

About Heavy Metal Polish

Chemical Guys Heavy Metal Polish is a specialty metal polish designed to restore the brilliant shine to any metal surface. The all new Heavy Metal Polish is formulated with specialty cleaners to remove contamination and imperfections while restoring gloss and clarity. Chemical Guys Heavy Metal Polish works great to restore chrome, stainless steel, copper, aluminum, brass, silver and gold metalwork. Our unique micro-polishing formula safely polishes metal for a vibrant shine. The advanced protective polymers in Chemical Guys Heavy Metal Polish removes stains and contaminates that can dull the finish. Heavy Metal Polish is perfect for polishing diamond plate and precious metals. Quickly and easily restore the original shine to your metalwork with Chemical Guys Heavy Metal Polish.

Restore Brilliant Shine To Metal Car Parts

Perfectly-polished metalwork complements the beautiful look of any car, truck, fire truck, boat, or motorcycle. Chemical Guys Heavy Metal Polish helps restore the brilliant shine to tarnished and oxidized car parts. Squeeze a few drops of Heavy Metal Polish onto a premium microfiber applicator pad, then gently work it into any chrome, aluminum, stainless steel, silver, gold, or copper surface. If that pad comes back black, then the polish is removing tarnish and contamination from the bare metal surface. Show how bright you metalwork can really shine by treating faded and oxidized parts with Chemical Guys Heavy Metal Polish.

Remove Tarnish Now; Prevent Tarnish Later

Polishing your metalwork is essential to restoring the gloss and shine to your classic car, hot rod and motorcycle. Chemical Guys Heavy Metal Polish is specifically formulated to remove oxidation, stains and tarnish to restore a brand-new look with brilliant shine. Heavy Metal polish removes tarnished pollution and oxides that dull shine, then seals the metal with protective polymers to help prevent future stains and oxidation. The unique polymer protection technology repels water spots and stains to ensure your precious metalwork is protected from the elements. Heavy Metal Polish is perfect for chrome bumpers, stainless steel exhaust pipes and tips, polished billet aluminum wheels, and any custom metalwork.

Polish By Hand Or Machine

Chemical Guys Heavy Metal Polish makes restoring the brilliance to your metalwork easier than ever. Squeeze a few drops of Heavy Metal Polish onto a microfiber applicator pad, then gently work the polish into the surface. The natural cleaners in the formula break down grime and oxidation to remove anything that blocks light from reflecting off the finish. Chemical Guys Heavy Metal Polish can also be used with a machine polisher: just squeeze 4 - 6 dots of polish onto a microfiber pad and polish the metal parts with a dual action polisher.

Product description

Natural Chemistry 07001 Metal Free 1 Liter

• 1 liter bottle
• Prevents stains and water discoloration by deactivating trace metals in pool water
• Not affected by pH and is recommended for us in well water
• Improves water clarity and prevents scaling on pool surfaces
• Dosage: 1 liter per 20,000 gallons

User questions & answers

Question:	can you use this with Jacks magic the purple stuff
Answer:	Thank you for your question. These Mr. Clean Cloths are microfiber which is a tightly woven polyester. Hope this helps!
Question:	I have the white calcium stains on the bottom. Will this product work for this
Answer:	I use just water to wipe counters. It is very absorbent and perfect roughness. I even stick few in my suitcase for use in all the kitchens we use when we travel (a lot).
Question:	How much do you need to add per gallon for preventative? We will be refilling our pool and need to know how much to buy
Answer:	Thank you for your question. These Mr. Clean Magic Eraser Toilet Scrubber disks are for single use. If you have any other questions please contact a member of our team at 1-800-493-2205 Monday-Friday 9AM-5PM EST or email us at [email protected]. Thank you.
Question:	How does it react to copper-based algaecide? Should their use be separated by some time period
Answer:	The issue is the Wand not having enough abrasion to make it stick. I had same problem and contacted the company and they sent me a new Wand and it works great.