13 best robot pool cleaners

• Hello, free time! Let the Nautilus CC Plus take over your pool cleaning duties for good. Ideal for swimming pools up to 50 feet, this cleaner will leave your pool sparkling clean in just 2 hours. Spend more time enjoying your pool and less time cleaning.
• The clean you need without the hassle. The Nautilus CC Plus was designed to clean your pool, effortlessly. With dual scrubbing brushes and superior filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean.
• Ditch the pumps and hose. Unlike the energy hogs that are pressure and suction cleaners, Dolphins are independent cleaning machines and do not rely on any additional equipment to get the job done. Save energy with every pool cleaning.
• Clean your pool with the touch of a button. Schedule the Nautilus CC Plus to clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day. Pool cleaning has never been easier!
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends.

User questions & answers

Question:	Does it clean and clime walls and steps
Answer:	Ours cleans all but top step of granite-look composite steps, 4x8. Gets stuck for 30 sec., tops, then blasts away & backs-up. Also does vertical waterline of vinyl pool beautifully & climbs walls. Never a dirty pool; we change & wash filters each use, 2 uses if not very dirty. We usually use 2 hr. cycle daily & store it on stand, covered. Pool gets cleaner & cleaner. CRYSTAL clear water at night in light. So happy.
Question:	how many volts
Answer:	The Dolphin has a power pack with free universal voltage of 100 - 240v. It can be used worldwide. Thanks.
Question:	Is this cleaner OK to use in either salt water pools and chlorine? I'm thinking of converting my chlorine pool to salt water next year
Answer:	Yes. It’ll work in either. “Salt Water” pools are chlorine pools. You add salt and stabilizer and the chlorinater turns it into chlorine. It’s just a lot less chlorine. My pool is this type.
Question:	where does the filtered water exit? top or rear? i had a cleaner with a rear exit and it kept disturbing debris on the pool so it never got it very cl
Answer:	The water is pulled through the bottom as it vacuums. The debris and water is filtered though 4 sizable filters. The resulting filtered water is then expelled through the top of the device. This device is a bulldog and cleans dirt, dead algae and leaves from your pool in one round. If the whole bottom is covered in leaves, you need to do your best to get them up and finish off with the Dolphin. This device saves me from vacuuming by hand for half the day. Also, the dirt, dead algae and general crud doesn't go through your pool filter. It completely removes it all without the risk of it going right back in and it doesn't stir up the bottom and settle back down after you vacuum. Come back a few hours later and it's still clean.

Product features

Goodbye, Debris!

The Nautilus CC Plus has superior filtering capabilities. It traps and locks-in all sorts of dirt and debris, so your pool is left exceptionally clean.

Effortless Cleaning

Tangle-free cable allows the Nautilus CC Plus to move freely around the pool with ease.

A Clean for Every Pool

Nautilus CC Plus is perfect for all pool types. From gunite to tile, and everything in between; you name it, and Dolphin will clean it.

Nautilus CC Plus Packaging List

Ideal Pool Length: Up to 50 ft.

Cleaning Coverage: Floor and walls

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 60 ft. Tangle-free cable

Suction Rate: 4500 GPH

Robot Weight: 19 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to store/roll/operate cable

When you Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

• Sit back and relax while the Nautilus CC cleans the pool for you. Ideal for small pools up to 33 feet, this compact cleaner will have your pool ready for splashing fun in just 2 hours
• Efficiency is key when it comes to pool cleaning. Unlike suction and pressure cleaners, Dolphins are 8 times more energy efficient and do not rely on your pool pump or filter to get the job done. Ditch the pumps and hose and save energy with every pool cleaning
• Dolphin does all the hard work for you. Agile and efficient, the Nautilus CC was designed to clean your pool, effortlessly. With superior scrubbing and filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean
• Clean your pool with the touch of a button. Schedule the Nautilus CC to automatically clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends

User questions & answers

Question:	Is this all set to use when you get it
Answer:	yes, plug it in and turn it on. it works great! I haven't messed with the schedule set up yet but it states you can pick days and it will auto clean
Question:	Can you use the ultra fine filters on this model? I notice it is standard on the Triton model, but it looks like the same configuration as this model
Answer:	Hello, Yes you can use the ultra fine filters with this unit, you just have to buy it since it does not come with it
Question:	How does this unit compare to the tigershark
Answer:	I had a Tigershark and the basket was a pain in the butt to clean. It also would let a lot of debri back in the pool when you pulled it out. I also had the motor go out and then the next year it stopped working. It came out when everyone else was using cloth bags to catch debri. At that time the Tiger Shark was the king but there are better designed models out there unless Hayward re-designed the unit.
Question:	will this work on a pool with 20,000 gallons capacity
Answer:	Yes. My pool holds 20,000 gallons and this machine works perfectly. A true timesaver.

Product features

Sucks Debris. Not Energy

With an average operating cost of 5 cents per hour, you don’t have to sacrifice a high energy bill for a clean pool.

Compact and Nimble

This robot climbs and cleans the walls with ease. It’s versatile and works on any pool surface type- gunite, tile, plaster, and everything in between.

Always Easy to Handle

The quick water release helps keep the Nautilus CC lightweight and easy to remove from the pool.

Nautilus CC Packaging List

Ideal Pool Length: Up to 33 ft.

Cleaning Coverage: Floor and walls

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 50 ft.

Suction Rate: 4000 GPH

Robot Weight: 13.8 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to set the weekly timer

When the power supply is switched on, you can press the weekly timer button to select one of the following cleaning schedules for the week ahead: One click: The robot will automatically work every day for a full cycle. This cycle will have the robot clean seven times in a week. Two clicks: The robot will automatically work every other day for a full cycle; that is four times in a week. Three clicks: The robot will automatically work every three days; that is three times in a week. A fourth click will cancel the cleaning schedule program. After selecting one of the schedule options, the robot will start to operate at the next occurrence of the programed start time. If the robot is working in the weekly timer mode, the weekly timer button will constantly blink between cycles. At the end of the week, the power supply will automatically switch off and you will need to reschedule the robot.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to clean the filters

Cleaning the filters are simple. Just remove the filter(s) from the robot, release the latch to let the dirt and debris fall out, and then hose off any remaining debris. Do not let the filters dry out before cleaning them. Clogged filters reduce the effectiveness of the cleaning. We suggest cleaning your filters every two months. Bag filters can be washed in the washing machine at 30 degrees, using a synthetic wash cycle, and allow to air dry. Cartridge filters can be clean in the dishwasher at 30 degrees. Although the filters may look clean, small particles may dry into the filter material and clog the filters.

• Drop and go. Easy to use, single button plug and play in-ground robotic pool cleaner ideal for pools up to 50 feet; backed by a 3 year quality assurance.
• CleverClean delivers a smart and efficient clean using advanced algorithms for complete pool coverage. Anti-tangle patented swivel cable allows your Dolphin to move around your pool with ease.
• Powerful, dual scrubbing brushes forcefully attack tough dirt and debris leaving your swimming pool floor, walls and waterline exceptionally clean in 3 hours.
• Multiple filter options for an optimal clean pool. The Premier comes standard with three filter options: bottom-load fine cartridge filters, ultra-fine cartridge filters, and an oversized fine filter bag.
• Cleaning made convenient. Set the Premier’s weekly scheduler to automatically clean for you- every day, every other day, or every 3rd day. The full filter indicator lets you know when it’s time to clean your filter.

User questions & answers

Question:	Does it come with a caddy and remote
Answer:	This listing is only for the unit. The Caddy and Remote are purchased separately!
Question:	Does this clean the seating ledge and steps
Answer:	the wheels need to be submersed in water as they act like a ballast. the machine sinks back down when the water drains from the wheels. This is good so the machine doesn't climb out of the pool. if your ledge & seating area are shallow, 24 inches, then no, the machine will not clean those parts. we use a pool brush to get the shallow bits before we activate the dolphin. we have pebbletech & the scrubbers do a fantastic job of cleaning
Question:	How do I choose between the bag vs the filter for my pool
Answer:	When you buy the premier both bag and filter comes with the purchase. Both of them I use. If you have a. Lot of debris and leaves use the bag, then the next day filter. Its took me a month to research all the robotics pool cleaner and i like the performance of this one. Worth the price with 3yrs warranty. Leo
Question:	Anyone know if this will get stuck on raised drains on bottom of pool
Answer:	Yes, it rarely gets stuck on our drain, maybe once every 10 cleanings. However, Maytronics provides a free outlet flow diverter attachment (I had to call to request) that gives the cleaner a little more forward push. It is definitely an improvement, although not perfect, now it gets stuck maybe once every 20 cleanings.

Product features

One Robot. Four Media Types.

Includes three media types: micro-cartridges, standard cartridges and oversized leaf/debris bag. Multi-Media is a Premier Exclusive. Disposable debris bags are available.

Scrubs Floor, Wall, & Tile/Waterline

In a radical departure from ordinary cleaners, Premier was designed to clean all pool surfaces including the tile and waterline with pinpoint precision.

Ultra-Efficient Twin DC Motors

Dual 24 volt DC motors and dual scrubbing brushes clean every square inch. Premier operates on 90% less energy than old-fashioned suction and pressure cleaners.

Complete Pool Coverage

Smart Nav software delivers highly optimized scanning and coverage for a new level of clean. Advanced algorithms clean 100% of the pool floor, wall & tile/waterline and pool floor.

Advanced Weekly Control

Some robots must be turned on manually each day. Smart control weekly timer works automatically at the desired interval. LED full indicator light alerts when it's time to empty.

No Tangle. No Hassle.

Anti-Tangle patented swivel technology provides uninterrupted hassle-free cleaning. One of the greatest engineering accomplishments in the pool robot industry.

• Hand off your pool cleaning duties for good! With the Triton PS, your pool will be left clean and ready for splashing fun in just 2 hours. Ideal for pools up to 50 feet, sit back and relax while Dolphin does all the hard work for you.
• Built to deliver a deep clean. The Triton PS is powerfully nimble on vertical surfaces for intense wall and waterline scrubbing. With superior filtering capabilities, dirt and debris can't hide from this underwater cleaning machine.
• Sustainably designed and energy efficient. Unlike suction and pressure cleaners, Dolphins are independent cleaning machines that do not rely on your pool pump or filter to get the job done. Extend the life of your pool’s system and save energy with every pool cleaning.
• Say, “hello” to your newfound free time. Schedule the Triton PS to automatically clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day. Pool cleaning has never been easier
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends.

User questions & answers

Question:	Can this be left in the pool
Answer:	I have to lift the Triton and remove the basket from the Triton to wash out the debris. I can move the Triton to the pool step to do this.
Question:	Why isn’t my basket filling up it’s not jamed
Answer:	The first time I used the robot, it ran for less than 30 minutes and stopped working. I checked the basket and it was FAR from full! I though that I had a lemon, but later realized that the vent looking thing on top of the robot was full of debris. I don't know what you call that part, but it has holes that kinda look like the shape of a honeycomb and it's right on top and water circulates through it or something. Apparently, if it's clogged w/ debris, the robot will stop working. I had to get my water hose and wash that out and it worked perfectly fine after that. My only complaint is that I have to do that quite a bit. So, although I have a big basket, mine never gets a chance to get full. That may just be my experience, but that's my greatest issue at this point. However, it cleaned the pool well, climbed the walls and even climbed onto the built in bench!
Question:	Does the cord get tangled on the new triton power stream models
Answer:	I have been using the vacuum for about 3.5 weeks since I received mine from Amazon. So far, I have had no issues with the tangling of the cord whatsoever. I must have used this vacuum literally 15x because my pool was filthy when I opened. The Unit has performed very well. I previously owned the Dolphin Dynamic where you had to alternate the handle to avoid the cord tangling. Even with that machine, I never really had issues. This machine is much lighter and easier to clean than my past unit. So far, I am extremely happy with it.
Question:	New unit is underwhelming. its missing a lot of dirt and leaves. now on 4th cycle. am i doing something wrong? expected better cleaning than this
Answer:	To pick up big stuff remove the bag from the chute. That allows it to pick it up without getting clogged. Do put the bag bag for regular cleaning so it will get all the smaller particles. This is the 2nd Dolphin I've had and they both work wonderfully!

Product features

Dirt & Debris Doesn’t Stand a Chance

The Triton PS has superior filtering capabilities. It traps and locks-in all sorts of dirt and debris so you pool is left exceptionally clean

Get a Really Clean Pool

This Dolphin intensely scrubs the pool’s floor, walls and waterline for you. Gone are the days of manual brushing.

Always Easy to Handle

The quick water release makes it easy to remove from the pool. Don’t worry, it only lets the water out and not the stuff trapped in the basket.

Triton PS Packaging List

Ideal Pool Length: Up to 50 ft.

Cleaning Coverage: Floor, walls, and waterline

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 60 ft. Tangle-free cable

Suction Rate: 4000 GPH

Robot Weight: 16.5 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to store/roll/operate cable

When your Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

Product description

The Zodiac MX6 is a compact yet powerful, ultra-efficient, suction side pool cleaner that features best in class vacuum power and programmed navigation for a totally clean pool without all the hassle. With an innovative low-flow design, it consumes less energy than any cleaner in its class, making it ideal for pools with 2-speed and variable speed pumps. The MX6 also incorporates cyclonic suction for powerful vacuuming and an articulating turbine blade for aggressive wall-climbing. Swiveling hoses are quick-connect style for easy assembly and a flow regulator controls the water flow so there is nothing to adjust at the skimmer. Includes 8. 4m of hose and is backed by a 1 year .Cleaner Type : suction cleaning robot

• Innovative low-flow design makes it ideal for pools with 2-speed or variable speed pumps
• Cyclonic suction for powerful vacuuming and articulating turbine blade for aggressive wall-climbing
• Swiveling hoses are quick-connect style for easy assembly
• Includes automatic Weir Valve, 90° Twist Lock Elbow, 7 x 1.2m Twist Lock Hose Lengths, Flow Regulator Valve, Hose Float, Hose Protector, Warranty Card.

User questions & answers

Question:	Does it fit any pool
Answer:	This product works in both in-ground and above ground pools, and is suitable for all pool surfaces, including concrete/gunite, vinyl, tile & fiberglass.
Question:	I have earth on the bootom of my pool. will it pick up material as fine as Earth
Answer:	i dont know what you mean by earth? it has a fan on the bottom of this unit that creates suction. it cleans the bottom and sides of my pool. long palm frans get stuck in the unit that you will need to remove.
Question:	Does this machine still have warranty
Answer:	It comes with a one year warranty.
Question:	I have a 1/2 horse power motor, will it work with that
Answer:	Put your vacuum hose in a 5 gal bucket of water. If your pump will suck that dry in 10 seconds, then this cleaner will work fine for you. If not, then I would avoid it.

User questions & answers

Question:	Is it best to leave robot in the pool when not in use
Answer:	no because it should not be in pool when people are, especially if it is on. very dangerous.
Question:	Does it clean walls
Answer:	Mine climbs the walls all the way up. It cleans the cove at the bottom as well. I love this machine. It has totally cleaned my pool of all debris. I highly recommend it for above ground pools.
Question:	I have a ladder going into my pool. Won't this cord get tangled on the ladder
Answer:	Yes. If it fits behind your ladder, it will absolutely get tangled. Has happened many times. I am thinking of attaching a cross-bar that runs from the ladder to the pool wall to stop the robot from going behind.
Question:	Will it clean a 30’ round pool
Answer:	My pool is 15 x 30 and it cleans it pretty well. It may miss a spot here and there but this product is so worth the money.

Product features

No Extra Stuff Needed

No booster pump. No extra hoses. No installation. Just plug it in, drop it in, and walk away for a clean pool.

Lets all the Water Out. Fast.

The quick water release makes it easy to remove from the pool. Don’t worry, it only lets the water out and not the stuff trapped in the basket.

Goodbye, Dirt and Debris!

The E10 traps and locks-in all sorts of debris so your pool is left exceptionally clean.

E10 Packaging List

Ideal Pool Length: Above ground pools up to 30 ft.

Cleaning Coverage: Floor only

Cleaning Cycle Time: 1.5 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off

Cable Length: 40 ft.

Suction Rate: 4000 GPH

Robot Weight: 13.8 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to store/roll/operate cable

When you Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

Product description

Polaris 9550 is a progressive, inspirational 4-wheel drive robotic cleaner. Its aquadynamic design combines commanding styling, inventive engineering, and intelligence for a truly impressive cleaner. The cleaner is outfitted with Aqua-Trax tires for all pool surfaces and features ActivMotion Sensor Technology for unmatchable navigation, even in larger and free-from pools. The 9550 Sport features oscillating brushes that scrub away stubborn dirt and stains and Proprietary Vortex Vacuum Technology that allows the cleaner pick up larger debris quickly while maintaining maximum suction. Debris is easily removed from the top of the cleaner which features a lid and large capacity filter canister, eliminating the need for messy bags. The forceful rear water propulsion system allows this agile cleaner to reach debris under stairs and in tight corners while improved power gets the job done fast. Best of all, the 9550 includes a 7-day programmable timer, pre-programmed cleaning patterns, and a motion sensing hand held remote. The cleaner also includes a heavy gauge, powder coated alloy caddy for storage and transport. Includes 110v transformer, 60ft cord, and filter canister. Waterline only Cleaning Cycle - For isolated tile line scrubbing.

• 4-wheel drive robotic cleaner outfitted with Aqua-Trax tires for all pool surfaces
• ActivMotion Sensor Technology for unmatchable navigation, even in larger and free-from pools.Cable Length:70 feet Cable
• Vortex Vacuum Technology allows cleaner to pick up larger debris while maintaining maximum suction
• Rear water propulsion system allows cleaner to reach debris under stairs and in tight corners
• Includes 7-day programmable timer, hand held remote and powder coated alloy caddy. Remote control : Yes. Motion-Sensing ; Cable Length 70' Cable / 60' Pool
• It is compatible with any of the IntelliTouch, EasyTouch and SunTouch remote control systems to control the IntelliFlo pump remotely

User questions & answers

Question:	Does it have Swivel cord
Answer:	My 9450 ordered in March 2017 has a swivel cord.
Question:	Will the Polaris 9550 work on my 27 ft above ground pool? thanks
Answer:	No, the Polaris 9550, 9350 & 9450 are for the in-ground pools only.
Question:	Can I use this with a caretaker system, and do I still need to brush the sides of my pool
Answer:	Sorry, I have no idea what a caretaker system might be, and I have never needed to scrub my walls other than the opening of my pool every spring.
Question:	Where is this cleaner made? Thanks
Answer:	Their corporate offices for Polaris are in California, USA. The actual product was produced in Malaysia with components from various other countries. Hope this helps. -Jason, Del Suppo Pools and Spas.

Product features

Polaris F9550 Sport Robotic In-Ground Pool Cleaner

The Top-of-the-line 4WD robotic pool cleaner featuring Easy Lift System, motion-sensing handheld remote, dirty canister indicator, and Vortex Vacuum technology for cleaning performance.

The absolute top-of-the-line 9550 Sport tackles any pool terrain, climbs steps and walls, and scrubs tile line with a solid-blade scrubbing brush. One of the distinct advantages of 9550 Sport is the smart 7-day programmable timer, with fully customizable cleaning cycles that allows pool owners to set it and forget it. With just a simple setting, you can clean the pool as frequently as you like and enjoy a pleasant, healthy pool all the time. In addition, the new and intuitive motion sensing remote puts the cleaning control in the palm of your hand.

Just point and direct the 9550 Sport to any desired location in the pool and you will never miss a spot. It is also the only model in the family that features a dirty canister indicator.The 9550 Sport cleans pools up to 60' in length. It includes a new premium, compact transport caddy that can be assembled in just minutes without using any tools.

Features

• Motion-Sensing Remote - Responsive cleaning control in the palm of your hand.
• Easy Lift System - With the touch of a button the 9550 surfaces to a desired location and waits for you to grab it, then automatically evacuates water for effortless removal from the pool.
• Dirty Canister Indicator - No more guess work. Know immediately when it's time to empty the filter canister.
• Vortex Vacuum Technology - Keeps debris suspended for long-lasting suction and superior cleaning performance.
• Easy Clean Filter Canister - Debris can easily be emptied with a simple shake and spray convenience.
• 7-day programmable timer - Fully customizable set it and forget it cleaning modes.
• ActivMotion Sensor - Automatically controls robot's position at all times, allowing complete cleaning coverage without any hang ups.
• 4-Wheel Drive Technology - Cleans pool floor, walls, and scrubs tile line with a solid-blade scrubbing brush.
• Waterline Only Cleaning Cycle - For isolated tile line scrubbing.

• 【Convenient Robotic Pool Cleaner】PAXCESS cordless automatic pool cleaner is the most innovative pool robot cleaner for Max.100㎡ inground pools/above ground pools. Put aside the restraint of the power cord, our cordless pool cleaner robot is equipped with 5000mah lithium-ion battery, which can achieve up to 60-90 minutes of work, it can operate without a cable attached to an electrical outlet, allowing greater mobility. IPX8 waterproof design for battery, please be assured to use it.
• 【Super Cleaning Performance】With deflector and powerful motor, this automatic pool cleaner with a fast-moving speed(appr.16m/min) and powerful cleaning ability, high frequency, fast speed, deep cleaning, saving time and effort. With two large suction doors, one bottom brush and superior filter, robotic pool cleaner can trap and lock in leaves, dirt, and sand, leaving your pool water sparkling clean. PAXCESS pool robot cleaner takes over your pool cleaning duties for good.
• 【How to let pool cleaner go ashore?】With advanced battery detection technology, paxcess cordless automatic pool cleaner will stop alongside the swimming pool shore when the battery drained out or completing the working cycle by itself. And you just need to pull up the floating handle to let the pool cleaners go ashore. Simply plug the robot pool cleaner into any 110v outlet to recharge for the next cleaning. Need about 4-6 hours for full charging.
• 【LIGHTWEIGHT&EASY TO CLEAN】 It’s equipped with a floating handle that can follow the movement of the robotic pool cleaner. Only 12.1lb, so it is very easy for elders or women to take the pool cleaner out of the pool. The cordless pool cleaner although can't climb the wall, but it can climb on max.15° pool slope.PAXCESS robotic pool cleaner are safe for all pool types , such as concrete , fiberglass and vinyl liner pools.
• 【Energy-Saving Pool Cleaner.】: No Installation&Hoses, No Booster Pump&Suction Lines,robotic pool cleaner requires minimal maintenance, do not rely on any additional equipment to get the job done.There are 2 wide suction doors, water flows out through the open nozzle to thrust the pool cleaner to move forward, you can adjust the nozzle by turning it to control the moving route to efficiently clean pool's floor. We provide 24-month warranty, pls contact us if you have any problems.

Product features

Economical and Convenient Cordless Pool Cleaner in the Market!

• PAXCESS Automatic Pool Cleaner Allows Greater Cleaning Mobility.

• It does a great job on all surfaces and vacuums up dirt, debris and leaves.
• Super lightweight Pool Cleaner for women and the elderly to pick it up.
• Provide healthier clean for your swimming pool by reducing the amount of chemicals needed.
• Good gift for the loved in this Summer !

Smart Navigation

• PAXCESS robotic pool cleaner pre-installed the intelligent navigation system,delivers highly optimized scanning and coverage for a new level of clean.

5000mAh-Large Capacity Battery

• The rechargeable automatic pool cleaner is powered by a 5000mAh large capacity lithium-ion battery that enables the cleaner to deliver constant performance up to 60-90 minutes cordless use to clean your pool.

IPX8 Waterproof Grade

• IPX8 waterproof design allows you to be assured of using the cordless automatic pool cleaner.

Easy Switch Knob

• Easy operation, put the cordless automatic pool cleaner into the water surface, then turn on the switch knob, the robotic pool cleaner will power on and the indicator light is steady blue. The pool cleaner will begin to work after the blue light flashes about 15s.

Superior Filtering Capabilities

• The cordless automatic pool cleaner has built-in fine reusable filter tray whose filtration precision up to 180 um, can trap dirt and fine debris while also cleaning and circulating the water- leaving your pool sparkling clean.

New Updated

• We add a charging port protector for every paxcess cordless pool robot cleaner. Charging port will not rust easily any more.
• Turn off the switch knob and check the charging port whether clean and dry before charging.

Product features

• How to Clean your Cordless Pool Cleaner?
• Easily steps to clean the filters - simply open the top cover of the robotic pool cleaner upward, take off the filter tray, then rinse them with a garden hose. PAXCESS provides pool owners with a hassle-free cleaning solution.

QA:

1. 1.Q:Why my cordless automatic pool cleaner wouldn’t sink to the bottom of the swimming pool quickly?

• A:Please don't worry, it is necessary to stay on the surface for 15-25 seconds until water flows out from the cleaner nozzles to the swimming pool before sinking to the bottom of the swimming pool.

1. 2. Q:Should I turn on the robotic pool cleaner before put it into the pool?

• A: Please pay more attention to this problem. Please remember that you should put the robot pool cleaner into the water before power it on, which can protect the wheels and the motors and extend their life.

1. 3.Q: Could I turn on the cordless automatic pool cleaner when charging?

• A:No, you can’t. Please turn off the pool cleaner and clean its charging ports before charging.

1. 4.Q: How to put the robotic pool cleaner into the pool?

• A:Put into or lift out from the pool with the cleaner bottom toward the wall to avoid any possible scratch to the pool wall.

• 【Climbs Wonderfully】This robotic pool cleaner covers both floor and walls hassle free during its cleaning cycle. The anti-rollover technology let you not worry about it falling. Built-in large and easy access top loading filter basket traps and locks in dirts and debris leaving your swimming pool extremely clean, also the filter cleaning is very simple.
• 【Automatic Setting】Schedule the robotic pool cleaner to automatically clean your pool by every 1 hours, 2 hours and 3 hours.
• 【4 Cleaning Modes】① ALL: to clean pool floor, walls and waterline (once floor, once wall). ②WALL: to clean the pool walls only. ③FLOOR: to clean the pool floor only. ④ALL + FLOOR: to clean the pool floor three times and pool walls once.
• 【Tangle-Free Swivel】 A swivel cord can help prevent tangles and allows the robots to move easily and efficiently around your swimming pool making clean-up a breeze.

User questions & answers

Question:	what is the manufacturer's warranty on this pool robot
Answer:	Before I purchased mine, I contacted the seller through Amazon and I was told that I had 6 months to return it if I was not satisfied and the robot has one year warranty.
Question:	what is the manufacturer's warranty on this pool robot
Answer:	I thought I recalled 30 or 60 days, but I purchased a 2 year added warranty, very inexpensive because I wasn't that familiar with this particular product. We have used it at least 8 times now. Once a week should be all needed going forward. I love it! Works well, easy to figure out. We had one issue where it seemed it wasn't working, but pulled it up and found that we had not closed the basket completely. Once we did that, perfect again!

Product features

Kuppet Automatic Robotic Pool Cleaner

The robotic pool cleaner is a new type of highly efficient and energy-saving swimming pool cleaning robot. Through its advanced computer-controlled program, it can clean the pool walls and bottom automatically. At the same time, it filters the pool water and gets rid of suspended particles without replacing the pool water.

App control on smartphone via Bluetooth

• Clean your pool with the mobile app. Spend more time enjoying your pool and less time cleaning.Pool cleaning has never been easier!

Product description

Deluxe automatic pool cleaner vacuum with a set of hose included! This item is perfect for efficiently cleaning dirt, leaves, debris, bugs, pebbles and short twigs from your pool; allowing you to spend more time in your swimming pool instead of cleaning it. No wheels or gears means no jamming, breaking or otherwise interrupting the cleaning process. Thinking smarter, not harder, is the key to enjoying your backyard oasis worry-free this summer! Features: Design- Design High efficiency and low maintenance Durable Cleaner - More durable than those cleaners made of thinner PVC Simple Design - There are no wheels to jam, no gears to break Its smart design for easy maintenance Existing Filtration System - Attaches to your existing filtration system. Acts like moving drain, moving more water through the filtration system over a shorter period of time Requirement - Require at least a 3/4 hp swimming pool pump or 1600ghp to function properly Great Energy Saver - The devices navigate around the water by themselves. This means that your pool stays clean without the need to expend your time and effort dragging cleaning implements through the waters Able to Clean Gently and Thoroughly - Soft and thickened pleated seal(base plate) to clean your swimming pool gently and thoroughly, regardless of size, shape, or construction. Clean your pool from top to bottom automatically and effortlessly Effective - Clean a variety of different types of debris from the pool including leaves, twigs, algae and numerous other particles. This can prevent a build-up of debris which could cause damage to the integrity of your pool Recommend for swimming pool up to 16' x 32' No tools required / No electricity needed Package Content: Pool Cleaner Hoses Sets Regulator Valve Manual

• 10 hoses included for up to 30' pool. Ideal for cleaning bottom surface and wall; does not clean stairs
• Require at least a 3/4 hp swimming pool pump or 1600 GHP to function properly.
• No tools required and no electricity needed; Attaches to your existing filtration system
• 1 Year Warranty for Parts Replacement (For order purchased from Amazon.com Prime and Ihubdeal ONLY )
• Cleaner should be moving about the pool at a rate of 8 to 12 feet per minute. Note : Refer to PDF attached below in Technical Specification for User manual

User questions & answers

Question:	what size motor does it need? will it go around on its own
Answer:	I have a 2100 GPH rated filter and the vacuum operates fine.
Question:	Will this unit replace a clogged Kreepy Krauly wall climber
Answer:	We are using it to replace ours...
Question:	Will it work with my 12x24 oval above ground pool
Answer:	Yes. I have a 16x18 above ground pool and 4 works beautifully! Eats the dirt, bugs and algae right up. I highly recommend it. And yes my pool is vinyl, no problems!
Question:	My pool cleaner stopped working after just three months - flapper stopped moving - Suction is great, pool filter is fine, cleaned flapper - now what
Answer:	Jeez. All pool cleaners get jammed every once and a while from debris, leaves, twigs being sucked into the mechanism. If you're going to buy and use your own equipment, you need to learn how to clean out anything it sucked up. With my pine trees, I might have to clean it once a week. To the other people replying--don't blame the product if you don't know how to use it. And yes, if you can't figure out how to clean it, do take it to a pool store. They'll probably show you for free, so great advice from the vendor. Yup, you do have to change the oil in your car, clean your furnace filter, and unclog your drains every once in a while.

Product features

Connect to Pump

1 HP power pump or above are recommended to use for this pool cleaner.

Connect to Filter

For better usage, the filter is recommended to be washed every week and kept it clean.

Function of yellow seal clip

Weighted stabilizer properly use the seal clip to keep the balance when you clean the pool. Recommended each Clip is for every 3-foot of depth of your pool.

How to use eye ball diverter

Adjust or twist eye ball divert to change the flow of water and to make sure the water flowing can be inside with right direction.

Hoses need to be right length

The length of the hose is very important while using a pool cleaner. With a hose that is too long you can get it tangled while moving around and with one that is not long enough you may get some spots that are not clean. Provided with adjustable hose lengths you can add or take off the amount of hose needed for your pool for the best fit.

Clean up debris from flapper regularly

When using the pool cleaner you should always remember to clean the flapper regularly. Before and after you start using the pool clean cleaning the flapper can greatly increase the flow of the cleaning making it more efficient and fast. Check inside the flapper for debris that might be stuck or debris that is building up and may cause future problems.

Tips: Please do not put the pool cleaner into the pool during the non-pool season to avoid the debris get into the flapper, and clean up it first before you start to use it in the beginning of pool season.

No air in the hoses

To get the optimal usage out of the pool cleaner, there should be no air in the hose while it is running. To avoid this issue, please leave the cleaner inside the pool as it will extract out air with water. Once its done, follow the instruction manual to operate.

Avoid erosion

Most of the pool chemicals or bleach would erode the materials of this product. To operate correctly, please wash the product after every usage and away from water. Specifically, except pool season, store the pool cleaner be outside of the pool in order to make it avoid erosion.

Smart Design - Adjustable Cleaner

Adjustable cleaner and diverter make it climb the walls of your pool and being a new cleaning pattern, also, it can be used by different positions by opening to redirect the return line water flow to clean properly in your pool, both of above ground and in ground.

Smart Design - Removeable Flapper

Freely moveable flapper is designed for prevent debris from being lodged inside. Debris can be removed by following instructions:

1. Taking out the screw from piffle plate and pulling it out.

2. Removing the flapper from main body and removing the debris.

3. Inserting the flapper back into the main body and snapping the baffle plate back.

Smart Design - Adjustable Hose

Adjustable hose length by adding and remove extra hose sections which designed for reaching the end of the pool and better cleaning. It also can make it easy to position cleaner. (Important: The pump must be on when you check the hose length. The hose is getting shorter when the pump is operating and it will become longer when the pump is off).

Smart Design - Silicone ripple cleaner

This flat smooth surface seal can be used for concrete, tile, vinyl, and fiberglass finish pool. Easy to clean and gets rid of stains.

Product description

• Polaris Vac-Sweep 280 pressure side pool cleaner
• Works in all in-ground pools; requires Polaris booster pump. Pool Type / Surface - Inground / All
• Palletized in multiples of 16 units ;TailSweep PRO Compatibility-YES
• Ready to connect to 1.5-inch dedicated pressure cleaner line
• Includes 31-feet of feed hose.Vacuum Inlet:2.25 inches
• Compatible with model Polaris 480 and 280 cleaner. NOT COMPATIBLE with Polaris 360 and 380 model pool cleaner

User questions & answers

Question:	Is the polaris 280 all-wheel drive? That is, is the single wheel on the opposite side of the tandem two also powered
Answer:	It is two wheel drive one wheel on the two wheel side and one on the opposite side. The third wheel is for balance.
Question:	I have a 280, which is about to go into nether-nether land. Will the 360 connection fit into the original 280 opening on the pool wall
Answer:	My 360 replaced a Polaris 180 and did fit the same pool wall connection. I think all models have the same connectors. James
Question:	Does the 360 come with the fatter hose
Answer:	No. I use the same hose as I had for the old Polaris that had to have a booster motor.
Question:	what comes with the F5 Polaris vac-Sweep 280 for
Answer:	A new attachment for pool wall, 30' of tubing with floats attached, check valve for movement reversal, and of course the 280 and debri trap. Basically if you had one before you just plug this one in. Great deal.

Product features

Excellent Performance

Vacuums, sweeps and scrubs the floor and walls.

Powerful Debris Intake

Large opening for big debris such as leaves, acorns, and pebbles. Plus, dual venturi jet vacuum for powerful intake.

Large Capacity Filter Bag

Collects debris before it reaches the pump basket and filter to reduce filter cleaning and prolong the life of your pool’s filtration system.

Continuous Cleaning

In-line back-up valve automatically frees the 280 if it gets cornered and keeps it cleaning without interruption.

Works with a Booster Pump

A Polaris booster pump provides optimal power so your cleaner can pick up even the largest debris, while circulating clean, warm water throughout all areas of the pool.

Note: Booster Pump Sold Separately.

• Delivers unmatched performance in an above-ground cleaner at an unthinkable cost.
• No messy bags! Large and in charge oversized debris cartridge holds up to 60% more debris
• Hypergrip Continuous Tracks - leaves wheels cleaners in its wake!
• Hyperbrush Dual Scrubbing Brushes scrubs away difficult to remove contaminants.
• SmartNav 2.0 Robotic Scanning. Only 14 lbs. Energy Efficient 24 Volt DC motors. One year warranty.

User questions & answers

Question:	What is the return policy if we are not satisfied
Answer:	Have taken out extra 3 year warranty, but it is one year otherwise.
Question:	Can you plug the power box into a heavy duty extension cord? My power supply is 12 ft from the pool and i have a 27ft above ground round pool
Answer:	As long as the extension cord, and the plug to the power supply are covered, and do not get wet, it will work!
Question:	Where can i purchase the fine partical filter
Answer:	Amazon is a great place to look.
Question:	Can this be used for in ground pool too
Answer:	Absolutely, this cleaner can!

Product features

The New Benchmark

Take whatever preconceived notions you may have about pool robots and throw them out. The all-new Escape is here with groundbreaking technology to ensure that your pool is cleaned to a whole new level.

Onboard DC Motors

Escape’s low voltage DC motors operate on nearly 90% less power than old fashioned cleaners. While other pool cleaners can expend a massive 1800 watts of power, the Escape robot requires just 180 watts which is just 5 cents per hour.

Active Scrubbing Brush

For most pools, vacuuming isn’t enough to remove algae and other stubborn build-ups attached to the pool’s floor. That’s why engineers equipped the Escape with the active scrubbing brush to deliver a new level of clean.

Continuous Tracks

Water between the wheels & pool surface results in slippage and lost efficiency. Escape takes a radical departure from the conventional wheel with continuous rubber tracks. No more slipping. No more wasted energy.

Massive Top-Load Filter

For a complete clean, your robot needs filtration that can handle debris of all size. Escape’s massive filter cartridge is easily accessed from the top. Messy, cumbersome debris bags used by traditional pool cleaners are a thing of the past.

Smart Navigation

Gone are the days of watching your robot aimlessly wander. Smart navigation and scanning software uses advanced algorithms to efficiently clean your pool. Escape’s ability to sense walls, ladders and drains delivers uninterrupted cleaning.

Product description

Equipped with patented SmartDrive technology, Hayward’s Navigator Pro Suction Cleaner systematically travels the floor, walls and coves of in-ground pools up to 20’ x 40’, creating thorough, reliable results—and with enhanced maneuverability, it keeps moving until the job is done. By connecting directly to your pool’s filtration system and installing in less than 10 minutes, Navigator Pro provides unwavering suction and simple setup. Plus, its wide vacuum inlet and unique wing design create a broad suction path that dirt and debris can’t escape. Navigator Pro also eliminates the need to empty debris bags, reducing overall maintenance and increasing relaxation time, while its advanced design cleans quietly and efficiently for a more peaceful backyard environment.

• The Hayward Navigator Pro Suction Cleaner is equipped with patented SmartDrive technology and systematically travels the pool floor, walls and coves for thorough, reliable results
• Powered by the pool’s existing filtration system, saving energy and money
• Advanced design ensures silent operation for a more peaceful pool environment
• Connects to skimmer or suction ports without tools in less than 10 minutes for simple setup and operation
• Enhanced vacuum wings and skirt provide efficient debris pickup and constant suction power

User questions & answers

Question:	Hayward is offering a $50.00 rebate if purchased by March 30, 2014, does that rebate apply to this item
Answer:	Hayward is offering a $100.00 rebate until July 2014. You must buy from registered Hayward distributor, so you could contact this supplier regarding the rebate form or perhaps contact Hayward directly.
Question:	Is Hayward offering a rebate now
Answer:	I was offered a $100 rebate and sent in the receipt but never received the $100.
Question:	What is the difference in the vinyl head versus the gunite units
Answer:	The two types have different "feet." They vinyl version works on vinyl lined pools and fiberglass lined pools. The "feet" do wear out are are easily user replaceable.
Question:	Does it come with the hose or is that extra
Answer:	It comes with the hose.

Product features

Navigator Pro Suction Poll Vaccum

Navigator Pro's exclusive SmartDrive programmed steering moves the cleaner silently in a predetermined series of turns to clean pool floors, walls and coves. This automatic suction pool cleaner is powered by the existing filtration system where all debris are captured. In addition, pool owners don't have the expense of an energy-consuming booster pump. Getting that sparkling clean pool is easy and effortless with the Navigator Pro automatic suction pool cleaner.