10 best pool water sensors

Product description

Pentair 520272 Air/Water/Solar Temperature Sensor with 20-Feet Cable Replacement Pool/Spa Automation Control Systems and Pump

• Air/water/Solar temperature sensor replacement
• Fits Pentair IntelliTouch, Easy Touch, Sun Touch, Compool pool and spa automatic control system
• Also fits Pentair minimax plus pool and spa heater pump
• Includes 10k-ohm thermistor, 20-feet cable

User questions & answers

Question:	Will this work on my Jandy Aqualink RS? Thx
Answer:	Yes, it is a 10 ohms sensor, same as aqualink
Question:	i want to use this sensor to make a control circuit for gutter heaters. Does anyone know the parameters of this sensor? volts, amps, PNP
Answer:	I know this is a 10K thermistor and connects on the low voltage side of the Pentair control unit.
Question:	Does this include the O-Ring for installing in water pipe
Answer:	Yes it has o ring but I used it as the air temp sensor. They are both the same.
Question:	What fitting do I need to get to put this inline with my heater inlet plumbing
Answer:	A simple pipe clamp large enough to wrap around your pvc plumbing is all that is required.

Product features

Pentair Air/Water/Solar Temperature Sensor with 20-Feet Cable Replacement Pool/Spa Automation Control Systems and Pump

• Use with any Hayward or Goldline control panel: AquaLogic, ProLogic, AquaPlus
• 10K OHM Sensor used for Water, Air or Solar applications, Includes 15ft cord
• Replaces Part No: GLX-PC-12-KIT, AQ-SOL-LV, AQ-SOL-LV-TC, GL-30, GL-235, GL-235 LV, GL-235 LV/HV, PC-10K
• Manufactured by Optimum Pool Technologies with Guaranteed Compatibility
• NEW IMPROVED design to improve lifespan and part quality. Includes 2" Pipe Clamp.

User questions & answers

Question:	What is the warranty and the accuracy
Answer:	You need to ask the seller about the warranty but as far as accuracy it's dead on

Product features

Optimum Pool Technologies Temperature Sensor

This temperature sensor from Optimum is a direct replacement used with the Aqualogic, AquaPlus, ProLogic, and many other Hayward automation systems. This sensor comes with a 15 foot cord to make installation easy anywhere, and an O-Ring to ensure a watertight seal on piping applications.

Replaces Part Numbers:

• GLX-PC-12-KIT
• AQ-SOL-LV
• AQ-SOL-LV-TC
• GL-30
• GL-235, GL-235 LV, GL-235 LV/HV
• PC-10K

Product description

-          AR-PRO offers the perfect replacement of 520272 air/water/solar temperature sensor with 20-feet cable for less cost from the OEM yet is made of premium, heavy duty material that increases the life cycle by 50%. -          Model Number: 520272 with 10k-ohm thermistor, 20-feet cable.   -          Guaranteed Fit: Our parts are approved by the mechanic to ensure the quality meets or exceeds the OEM 520272. -          Fits The Following Brands: Easy Touch, Sun Touch, Pentair InterlliTouch, Compool Pool and Spa Automatic Control System. Also fits Pentair Minimax Plus Pool and Spa Heater Group.

• -  AR-PRO offers the perfect replacement of 520272 air/water/solar temperature sensor with 20-feet cable for less cost from the OEM yet is made of premium, heavy duty material that increases the life cycle by 50%.
• -  Model Number: 520272 with 10k-ohm thermistor, 20-feet cable.
• -  Guaranteed Fit: Our parts are approved by the mechanic to ensure the quality meets or exceeds the OEM 520272.
• -  Fits The Following Brands: Easy Touch, Sun Touch, Pentair InterlliTouch, Compool Pool and Spa Automatic Control System. Also fits Pentair Minimax Plus Pool and Spa Heater Group.

User questions & answers

Question:	will this work with a Hi-Tech system
Answer:	Thank you for your question. The LR1 is designed for use with rotary lasers. For the GLL2-50 line laser we would recommend the LR2 receiver.http://www.amazon.com/Bosch-LR2-Laser-Detector-Lasers/dp/B003L6SFZW/ref=sr_1_1?s=hi&ie=UTF8&qid=1463774063&sr=1-1&keywords=bosch+lr2 If you have further questions please feel free to contact our Bosch Customer Service Representatives at 1-877-BOSCH-99 (1-877-267-2499).
Question:	What size drill bit should be used
Answer:	The LR1 is not compatible with the GLL3-80. The LR2 would be the correct laser detector for use with the GLL3-80. If you have additional questions please feel free to contact our Bosch Product Specialists 1-877-BOSCH-99 (1-877-267-2499).
Question:	Will this work with the hayward aqua solar
Answer:	Had to return, was not the correct one for us.
Question:	what is the accuracy
Answer:	Yes it doesn't work without it.

Product description

-          AR-PRO offers the perfect replacement of 520272 air/water/solar temperature sensor with 20-feet cable for less cost from the OEM yet is made of premium, heavy duty material that increases the life cycle by 50%. -          Model Number: 520272 with 10k-ohm thermistor, 20-feet cable.   -          Guaranteed Fit: Our parts are approved by the mechanic to ensure the quality meets or exceeds the OEM 520272. -          Fits The Following Brands: Easy Touch, Sun Touch, Pentair InterlliTouch, Compool Pool and Spa Automatic Control System. Also fits Pentair Minimax Plus Pool and Spa Heater Group.

• -  AR-PRO offers the perfect replacement of 520272 air/water/solar temperature sensor with 20-feet cable for less cost from the OEM yet is made of premium, heavy duty material that increases the life cycle by 50%.
• -  Model Number: 520272 with 10k-ohm thermistor, 20-feet cable.
• -  Guaranteed Fit: Our parts are approved by the mechanic to ensure the quality meets or exceeds the OEM 520272.
• -  Fits The Following Brands: Easy Touch, Sun Touch, Pentair InterlliTouch, Compool Pool and Spa Automatic Control System. Also fits Pentair Minimax Plus Pool and Spa Heater Group.

User questions & answers

Question:	Will this replace the ambient temperature sensor for my solar solar pool water heater. This is the one for the roof. The return water too
Answer:	The reception angle for this laser receiver is plus or minus 45 degrees minimum.
Question:	Will this work with an Aqualink RS
Answer:	It is "compatible" with all red beam rotary lasers, yes. However, not every feature of your non-Spectra Precision laser may be supported. For example, if you have a Topcon RL-H5A rotary laser level, the HL700 and other Spectra Precision and Apache laserometers will not alert you regarding the height alert (HI) or the low-battery alert that the Topcon laser sends out to the laser receiver. It is an annoyance yes, but not a showstopper for me, as I tend to keep an eye on my batteries and my rotary laser is usually not subject to anyone messing with it. But if you want total compatibility, including these two alerts, you will need to buy a Topcon laser receiver like the LS-100D (which is no where near as nice as this HL700).
Question:	Can anyone suggest a low cost temperature readout (make and model) that could used with this probe
Answer:	It does not. It does have a screen on the back so you can see what the front is reading. The Spectra Precisions CR600 has something similar to what you want.
Question:	Does this have red/green wires
Answer:	Hi! The laser receiver compatible with the GLL2-45 is the LR2. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.

Product description

Along with a pool barrier and swimming instruction for your child, a pool alarm is an essential component of any pool safety plan. Be prepared and armed with the PoolEye Immersion Pool Alarm. The PoolEye includes the required hardware to attach it either to the deck of an inground pool or the top rail of an aboveground pool. This battery-operated alarm works for pools up to 20’ x 40’ and is NSF certified to meet ASTM F2208 pool safety standards for pools up to 16’ x 32’. The pool safety alarm features sub-surface wave detection, so there are fewer false alarms. The 85 dB siren alerts when an object as light as 15 lb/7 kg is detected. A magnetic key is included for reactivating/resetting the alarm. An in-home remote alarm is also included, so you will immediately be alerted whether you are indoors or out. PoolEye is the only brand you need to give your family peace of mind when it comes to pool safety. Our affordable and accurate sub-surface wave detection alarms are tested to the highest standard, ensuring they are consistently reliable. Poolside siren 85+ db at 10 ft.

• WATER MOTION SENSOR – Be prepared with the PoolEye Immersion Pool Alarm. With its underwater motion sensor, PoolEye provides an extra layer of protection when it comes to pool safety. Works for pools up to 20’ x 40’ (certified for pools up to 16’ x 32’).
• EASY TO INSTALL – The PoolEye Pool Alarm is battery powered and easy to install. It must be fixed to the deck or top rail of the pool to ensure it cannot be removed, and it must be installed using the supplied hardware.If water temperature drops below 32 degrees Fahrenheit or 0 Celsius the alarm must be removed to prevent damage to the unit
• FEWER FALSE ALARMS – This water motion sensor features sub-surface wave detection that will not pick up movement from rain or wind, meaning there are fewer false alarms. The 85 dB alarm is triggered when an object as light as 15 lb is detected.
• INCLUDES IN-HOME ALARM – A magnetic key is included for reactivating/resetting your water alarm sensor. An in-home remote alarm is also included, so you will be immediately alerted whether you are inside or out.
• POOLEYE – PoolEye is the only brand you need to give your family peace of mind when it comes to pool safety. Our affordable and accurate sub-surface wave detection alarms are tested to the highest standard, ensuring they are consistently reliable.

User questions & answers

Question:	Is this ok for a 27' above ground pool
Answer:	yes it is good for an above ground pool
Question:	How to I get the alarm to go on the part that's in pool
Answer:	Return it as quickly as you can. This alarm is totally useless. Even after we turned it off because we were in the pool, it continually went off.
Question:	Is the battery included
Answer:	No
Question:	We have to have a wi-fi for this
Answer:	You dont need it

Product description

Temperature Sensor used with Jandy systems (AquaLink, Zodiac, or Polaris). This Aftermarket Sensor may be used as a Water, Air, or Solar sensor.

• For use with Zodiac, Jandy, and Polaris Controls. AquaLink RS Temp Sensor replacement
• Used for Water, Air or Solar applications, Includes 20ft cord & 2" Pipe Clamp
• Replaces Part No: 7790, R3002900, 7784, 7786, 7791
• NEW IMPROVED design to improve lifespan and part quality.
• Manufactured by Optimum Pool Technologies with Guaranteed Compatibility

User questions & answers

Question:	Is any glue required to install in pvc pipe? also, curious if you had a video for installation
Answer:	No glue is required. You just gently tighten the pipe clamp and the o-ring on the sensor makes a water tight seal.

Product features

Optimum Pool Technologies Temperature Sensor

This temperature sensor from Optimum is a direct replacement for Jandy’s AquaLink temperature sensor, but can also be used with Polaris and Zodiac control systems. This sensor comes with a 20 foot cord to make installation easy anywhere, and an O-Ring to ensure a watertight seal on piping applications.

Replaces Part Numbers:

• 7790
• R3002900
• 7784
• 7786
• 7791

Product description

Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 F. For use in more demanding water usage applications. Self modulating flow sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses 9 KW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4'' NPT. Energy efficiency: 99.8%. UL and CSA certified.Weight: 11 lb. Lifetime warranty. It can provide between 2.7 and 6.5 gallons-per-minute depending on the inlet water temperature.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature can reach as low as 37 degrees. The ECO 27 is capable of heating nearly 3 gallons per minute at this temperature. The ECO 27 is the largest electric tankless water heater available with Patented Self Modulating Technology. This model is well-suited for homes in the northern U.S., Canada, and in the southern U.S. for large Roman-style or Jacuzzi tubs that generally have more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 degree. Prior to purchase and installation please verify that this model is the right size for your hot water needs and electrical requirements.

• Savings of up to 50% on water heating costs. Dimensions :17H x 17W x 3.625D inches ;Pipes fittings :3/4 inch NPT
• Digital temperature control in 1-degree increments allows control of hot water; Activation Flow: 0.3 GPM
• Copper and stainless components designed for efficiency, durability and easy replacement.
• Compact size saves valuable storage space, while the stylish and advanced design is pleasing to the eye and Copper and stainless components designed for efficiency, durability and easy replacement.
• Prior to purchase & installation, please verify that this model is the right size for your hot water needs and electrical requirements. Electrical requirements: 27 kW, 240 volts, 40 required breakers, 112.5 maximum power (AMP), 8 required wire.Amperage Draw:113 A
• Required Breaker Quantity: Three 40 Amp Double Pole
• Recommended Electrical Panel: 200 Amps

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	In order to have a 208 volt power you would need to be pulling off of 2 legs of a 3 phase service. Are you sure you have 3 phase?
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	Approx 7x11. The cover is approx 8x12
Question:	What is the power consumption of this tank-less heater
Answer:	This is a 240V/208V heater. At 240V this heater draws 6.25 amps.
Question:	remote
Answer:	Are you asking if it can be wired 208 volt? The answer is yes. I don't have any experience with model you are referring to otherwise.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

• 【Poolside Motion Sensor】 Helps you detect the fluctuation of water surface then instantly gives dangerous feedback when something wrong happens in your pool. Alarms and reminds you to implement rescue at a short response time.
• 【Flashing Receiver Alarm】 The receiver alarm will give out sounds with LED flashing at the same time when children or pets fall into the pool or pond. The 85 dB alarm will be triggered when a 13-lb-weight object is detected.
• 【Adaptation Pool Type】 The poolside unit is suggested to be installed in the pool less than or equal to 16x32sq.ft. And be sure it is installed at the proper place. The tube should be submerged under the water surface about 3.9".
• 【Accidental Touching Prevention】 Just remember press the button down at first then move the control button to change its working status before setting the poolside unit. It is designed to avoid false operation by children or pets.
• 【Not A Life-saving Device】 ATTENTION! The IC ICLOVER Pool Alarm is just a pool safety alarm system, but not a life-saving device! Any safety consideration such as adult supervision, lifeguards or fences should not be replaced!

Product features

IC ICLOVER POOL ALARM SYSTEM

Notice：

• ATTENTION!
• Please read the user manual carefully before you use this pool alarm system!
• The IC ICLOVER Pool Alarm is just a pool safety alarm system, but not a life-saving device!
• Any safety consideration such as adult supervision, lifeguards or fences should not be replaced!

Poolside Unit

• The poolside unit is suggested to be installed in the pool less than or equal to 16x32sq.ft.
• The sensor tube should submerge into water 10cm(3.9") deep.

Indoor Unit

• The indoor unit sounds alarm together with red light flashing.
• Sound as loud as 85db alarm when the poolside unit has been triggered.

Diversified Functions

• Place the indoor unit within 300 feet from poolside unit.
• The indoor unit needs seconds to match with the poolside unit for the first-time using.

• Used for Water, Air or Solar applications, Includes 20ft cord & 2" Pipe Clamp
• Replaces Part No: 520272, TS5T, STS5T
• Does NOT replace TS5L Sensor for Compool Systems
• NEW IMPROVED design to improve lifespan and part quality.
• High quality replacement part manufactured by Optimum Pool Technologies.

User questions & answers

Question:	What is warranty for this device
Answer:	The HL700 can only be used with rotary lasers. If you need a receiver for your static beam and it is a Spectra Precision Laser, try, the HR220.

Product features

Optimum Pool Technologies Temperature Sensor

This temperature sensor from Optimum is a direct replacement used with the Pentair IntelliTouch, EasyTouch and SunTouch Systems . This sensor comes with a 20 foot cord to make installation easy anywhere, and an O-Ring to ensure a watertight seal on piping applications.

Replaces Part Numbers:

• 520272
• TS5T
• STS5T

Product description

Robotic Pool Cleaner, Rechargeable Cordless Design, 90 Mins Working Time, IPX8 Waterproof, Power Detection Technology, Built-in Water Sensor Technology

• Applicable Places: QOMOTOP rechargeable robotic pool cleaner can be used to clean underground and above-ground swimming pools with flat bottoms (or maximum slopes not exceeding 15 degrees). The angle adjustment design at the nozzle allows the cleaner to be used to clean round or square pools. The maximum cleaning area is 860 sq. ft and 6.6 fts water depth.
• Excellent Cleaning Ability: The bottom of the Qomotop robotic pool cleaner is equipped with two large suction doors, and the brush is installed in the middle of the bottom to ensure that no stains remain. Built-in removable filter tray for easy cleaning.
• Rechargeable Wireless Design: QOMOTOP rechargeable robotic pool cleaner is equipped with built-in 5000mah power lithium battery which can achieve up to 90 minutes of work after 5-8 hours’ charging. Both the body and the charging port are IPX8 waterproof. It’s equipped with a floating handle that can follow the movement of the cleaner. When the cleaner finishes its work, it is convenient to take it out of the pool.
• Intelligent Shutdown Technology: The power detection system allows the QOMOTOP rechargeable robotic pool cleaner to automatically lean against the wall when the battery power is low, besides, the off-water shutdown design allows the robotic pool cleaner to stop automatically after leaving the pool.
• What You Get: QOMOTOP rechargeable robotic pool cleaner×1, Adapter×1, Brush×1, User Manual & Certificate×1, Tow rope×1, Floating Handle×1， Swing Plate×2（Blue & Clear, We will provide professional service for you if you have any problem with your robotic pool cleaner.

User questions & answers

Question:	What is purpose of swing plate
Answer:	It changes the direction of the machine when it hits the side of the pool
Question:	Is the battery user replaceable, if where to order, and cost
Answer:	Dear customer, This robot use built-in battery and IP8X waterproof body structure, not support battery replacement now. The estimated life of a Lithium-Ion battery is 500 charge cycles, which can be used about 7 years.
Question:	does anyone have pics they can post? Also, do you need to buy the ultra fine filter with this
Answer:	Dear Customer, We welcome everyone share photos and there are videos in this page to introduce the robot. And this cordless robot includes one fine filter(filter capability: 180μm), suitable for most of dirts, sand, small bugs and leaves.
Question:	Will this work on a 18x36x54 oval above ground pool
Answer:	Dear customer, this Qomotop Pool Robot will work for a 18x36x54 oval above ground pool. 90-min running time is suitable for pool surface max 860 sq.ft and water depth less than 78 in(6.6ft). A 18x36x54 oval above ground pool area= π*(18/2)*(36/2) ≈ 509 sq.ft ＜860 sq.ft, 54 in ＜78in, so it is ok.