12 best pool cleaners

• Hello, free time! Let the Nautilus CC Plus take over your pool cleaning duties for good. Ideal for swimming pools up to 50 feet, this cleaner will leave your pool sparkling clean in just 2 hours. Spend more time enjoying your pool and less time cleaning.
• The clean you need without the hassle. The Nautilus CC Plus was designed to clean your pool, effortlessly. With dual scrubbing brushes and superior filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean.
• Ditch the pumps and hose. Unlike the energy hogs that are pressure and suction cleaners, Dolphins are independent cleaning machines and do not rely on any additional equipment to get the job done. Save energy with every pool cleaning.
• Clean your pool with the touch of a button. Schedule the Nautilus CC Plus to clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day. Pool cleaning has never been easier!
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends.

User questions & answers

Question:	Does it clean and clime walls and steps
Answer:	Ours cleans all but top step of granite-look composite steps, 4x8. Gets stuck for 30 sec., tops, then blasts away & backs-up. Also does vertical waterline of vinyl pool beautifully & climbs walls. Never a dirty pool; we change & wash filters each use, 2 uses if not very dirty. We usually use 2 hr. cycle daily & store it on stand, covered. Pool gets cleaner & cleaner. CRYSTAL clear water at night in light. So happy.
Question:	how many volts
Answer:	The Dolphin has a power pack with free universal voltage of 100 - 240v. It can be used worldwide. Thanks.
Question:	Is this cleaner OK to use in either salt water pools and chlorine? I'm thinking of converting my chlorine pool to salt water next year
Answer:	Yes. It’ll work in either. “Salt Water” pools are chlorine pools. You add salt and stabilizer and the chlorinater turns it into chlorine. It’s just a lot less chlorine. My pool is this type.
Question:	where does the filtered water exit? top or rear? i had a cleaner with a rear exit and it kept disturbing debris on the pool so it never got it very cl
Answer:	The water is pulled through the bottom as it vacuums. The debris and water is filtered though 4 sizable filters. The resulting filtered water is then expelled through the top of the device. This device is a bulldog and cleans dirt, dead algae and leaves from your pool in one round. If the whole bottom is covered in leaves, you need to do your best to get them up and finish off with the Dolphin. This device saves me from vacuuming by hand for half the day. Also, the dirt, dead algae and general crud doesn't go through your pool filter. It completely removes it all without the risk of it going right back in and it doesn't stir up the bottom and settle back down after you vacuum. Come back a few hours later and it's still clean.

Product features

Goodbye, Debris!

The Nautilus CC Plus has superior filtering capabilities. It traps and locks-in all sorts of dirt and debris, so your pool is left exceptionally clean.

Effortless Cleaning

Tangle-free cable allows the Nautilus CC Plus to move freely around the pool with ease.

A Clean for Every Pool

Nautilus CC Plus is perfect for all pool types. From gunite to tile, and everything in between; you name it, and Dolphin will clean it.

Nautilus CC Plus Packaging List

Ideal Pool Length: Up to 50 ft.

Cleaning Coverage: Floor and walls

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 60 ft. Tangle-free cable

Suction Rate: 4500 GPH

Robot Weight: 19 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to store/roll/operate cable

When you Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

Product description

Hayward’s Poolvergnuegen 2-Wheel Suction PoolCleaner uses your existing pool pump and filter for power—simply plug it into the designated suction port or the skimmer for quick an easy setup. Featuring patented self-adjusting turbine vanes, PoolCleaner delivers maximum power at any flow and allows passage of larger, more stubborn debris. Patented tire treads enhance climbing ability and obstacle maneuverability while patented adjustable roller skirts allow the cleaner to maintain optimal suction on uneven surfaces and when encountering obstacles. Multiple pre-programmed internal steering sequences ensure complete pool coverage—PoolCleaner travels 8 to 10 feet before turning, and turns can range from 90 to 450 degrees. For average-sized pools up to 16’ x 32’, the 2-wheel Poolvergnuegen PoolCleaner is a powerful, efficient choice.

• The Hayward Poolvergnuegen 2-Wheel Suction PoolCleaner features patented self-adjusting turbine vanes that deliver maximum power at any flow and allow passage of large debris
• 2-wheel drive cleans average-sized pools up to 16’ x 32’
• Patented tire treads enhance climbing ability and obstacle maneuverability
• Multiple pre-programmed internal steering sequences ensure complete pool coverage and efficient cleaning
• Patented adjustable roller skirts allow the cleaner to maintain optimal suction on uneven surfaces and when encountering obstacles

User questions & answers

Question:	do you have parts for the island pool cleaner
Answer:	I purchased the unit a few months ago, so I haven’t had a need to purchase any parts.
Question:	Does this work on an in ground pool system without a slimmer basket
Answer:	I have never heard of an inground pool without a skimmer. The hose plugs into the skimmer suction.
Question:	My cleaner keeps falling over onto its side and staying there. Are there weights that can keep it right side up
Answer:	My cleaner is kept upright by the hose which is floating on top of the water. Did you use the hose like it came with the box and hooked the right element (the one with the two white floating supports) to the cleaner?
Question:	Hi! what is the difference between 2-wheel w3pvs20jst model vs. 2-wheel pv896584000-013 model
Answer:	I don't know. I have never owned the 2-wheel model. I believe it's for larger pools,

Product features

The PoolCleaner

The PoolCleaner is a suction cleaner available in 2 or 4-wheel drive to suit any pool size. Patented features such as self-adjusting turbine vanes ensure maximum power at any flow and effortless debris management. Adjustable skirt and tire treads work in concert with programmed steering to ensure easy wall-climbing, obstacle management and maximized pool coverage.

Self-Adjusting Turbine Vanes

All of The PoolCleaner models have patented self-adjusting turbine vanes. The flexible vanes ensure maximum power at any flow. Their ability to move allows easy passage of large debris to ensure full cleaning with peace of mind.

Robust Tire Treads

One look and you will see the patented tire treads give The PoolCleaner enhanced climbing ability and obstacle maneuverability - especially with main drains. This makes The PoolCleaner ideal for all pool surfaces and shapes.

Steering System

The PoolCleaner has multiple pre-programmed internal steering sequences, which cause the left wheel to periodically reverse, allowing it to turn and then move into another direction. This feature ensures full pool coverage and efficient cleaning.

Interchangeable Throats

3 interchangeable throats allow optimization of suction performance at lower flow and larger debris passage. As such, it is the ideal suction cleaner for use with variable speed pumps.

Product description

Deluxe automatic pool cleaner vacuum with a set of hose included! This item is perfect for efficiently cleaning dirt, leaves, debris, bugs, pebbles and short twigs from your pool; allowing you to spend more time in your swimming pool instead of cleaning it. No wheels or gears means no jamming, breaking or otherwise interrupting the cleaning process. Thinking smarter, not harder, is the key to enjoying your backyard oasis worry-free this summer! Features: Design- Design High efficiency and low maintenance Durable Cleaner - More durable than those cleaners made of thinner PVC Simple Design - There are no wheels to jam, no gears to break Its smart design for easy maintenance Existing Filtration System - Attaches to your existing filtration system. Acts like moving drain, moving more water through the filtration system over a shorter period of time Requirement - Require at least a 3/4 hp swimming pool pump or 1600ghp to function properly Great Energy Saver - The devices navigate around the water by themselves. This means that your pool stays clean without the need to expend your time and effort dragging cleaning implements through the waters Able to Clean Gently and Thoroughly - Soft and thickened pleated seal(base plate) to clean your swimming pool gently and thoroughly, regardless of size, shape, or construction. Clean your pool from top to bottom automatically and effortlessly Effective - Clean a variety of different types of debris from the pool including leaves, twigs, algae and numerous other particles. This can prevent a build-up of debris which could cause damage to the integrity of your pool Recommend for swimming pool up to 16' x 32' No tools required / No electricity needed Package Content: Pool Cleaner Hoses Sets Regulator Valve Manual

• 10 hoses included for up to 30' pool. Ideal for cleaning bottom surface and wall; does not clean stairs
• Require at least a 3/4 hp swimming pool pump or 1600 GHP to function properly.
• No tools required and no electricity needed; Attaches to your existing filtration system
• 1 Year Warranty for Parts Replacement (For order purchased from Amazon.com Prime and Ihubdeal ONLY )
• Cleaner should be moving about the pool at a rate of 8 to 12 feet per minute. Note : Refer to PDF attached below in Technical Specification for User manual

User questions & answers

Question:	what size motor does it need? will it go around on its own
Answer:	I have a 2100 GPH rated filter and the vacuum operates fine.
Question:	Will this unit replace a clogged Kreepy Krauly wall climber
Answer:	We are using it to replace ours...
Question:	Will it work with my 12x24 oval above ground pool
Answer:	Yes. I have a 16x18 above ground pool and 4 works beautifully! Eats the dirt, bugs and algae right up. I highly recommend it. And yes my pool is vinyl, no problems!
Question:	My pool cleaner stopped working after just three months - flapper stopped moving - Suction is great, pool filter is fine, cleaned flapper - now what
Answer:	Jeez. All pool cleaners get jammed every once and a while from debris, leaves, twigs being sucked into the mechanism. If you're going to buy and use your own equipment, you need to learn how to clean out anything it sucked up. With my pine trees, I might have to clean it once a week. To the other people replying--don't blame the product if you don't know how to use it. And yes, if you can't figure out how to clean it, do take it to a pool store. They'll probably show you for free, so great advice from the vendor. Yup, you do have to change the oil in your car, clean your furnace filter, and unclog your drains every once in a while.

Product features

Connect to Pump

1 HP power pump or above are recommended to use for this pool cleaner.

Connect to Filter

For better usage, the filter is recommended to be washed every week and kept it clean.

Function of yellow seal clip

Weighted stabilizer properly use the seal clip to keep the balance when you clean the pool. Recommended each Clip is for every 3-foot of depth of your pool.

How to use eye ball diverter

Adjust or twist eye ball divert to change the flow of water and to make sure the water flowing can be inside with right direction.

Hoses need to be right length

The length of the hose is very important while using a pool cleaner. With a hose that is too long you can get it tangled while moving around and with one that is not long enough you may get some spots that are not clean. Provided with adjustable hose lengths you can add or take off the amount of hose needed for your pool for the best fit.

Clean up debris from flapper regularly

When using the pool cleaner you should always remember to clean the flapper regularly. Before and after you start using the pool clean cleaning the flapper can greatly increase the flow of the cleaning making it more efficient and fast. Check inside the flapper for debris that might be stuck or debris that is building up and may cause future problems.

Tips: Please do not put the pool cleaner into the pool during the non-pool season to avoid the debris get into the flapper, and clean up it first before you start to use it in the beginning of pool season.

No air in the hoses

To get the optimal usage out of the pool cleaner, there should be no air in the hose while it is running. To avoid this issue, please leave the cleaner inside the pool as it will extract out air with water. Once its done, follow the instruction manual to operate.

Avoid erosion

Most of the pool chemicals or bleach would erode the materials of this product. To operate correctly, please wash the product after every usage and away from water. Specifically, except pool season, store the pool cleaner be outside of the pool in order to make it avoid erosion.

Smart Design - Adjustable Cleaner

Adjustable cleaner and diverter make it climb the walls of your pool and being a new cleaning pattern, also, it can be used by different positions by opening to redirect the return line water flow to clean properly in your pool, both of above ground and in ground.

Smart Design - Removeable Flapper

Freely moveable flapper is designed for prevent debris from being lodged inside. Debris can be removed by following instructions:

1. Taking out the screw from piffle plate and pulling it out.

2. Removing the flapper from main body and removing the debris.

3. Inserting the flapper back into the main body and snapping the baffle plate back.

Smart Design - Adjustable Hose

Adjustable hose length by adding and remove extra hose sections which designed for reaching the end of the pool and better cleaning. It also can make it easy to position cleaner. (Important: The pump must be on when you check the hose length. The hose is getting shorter when the pump is operating and it will become longer when the pump is off).

Smart Design - Silicone ripple cleaner

This flat smooth surface seal can be used for concrete, tile, vinyl, and fiberglass finish pool. Easy to clean and gets rid of stains.

Product description

Powerful water clarifier produces and maintains crystal clear pool water without affecting pH balance or other chemicals. Its thick, highly concentrated formulation is designed to clear cloudy water FAST.

• Concentrated Formula - Only 1 oz. treats 5,000 gallons
• Clears cloudy water fast & prevents future hazy appearance
• Effective at varying temperature levels & range of chemical levels
• Use with all filter types - will not clog filters
• Reduces sanitizer demand by removing dirt particles

User questions & answers

Question:	does it turn the water BLUE,,, that is what I wont in my pool,,,Blue water
Answer:	it clears the water of any cloudiness. it does not turn the water blue. pool water will always reflect the color of your liner.
Question:	Will this work without shocking first
Answer:	Yes
Question:	Exactly what chemicals are in this product? Do I use it in addition to shock, muriatic acid, algecide.... or instead of
Answer:	This is not a product that replaces ANY pool chemical treatment. You still need your chlorine or other sanitizer, muriatic acid, CYA, Borax, algaecide, shock, etc. as usual. This enhances your usual maintenance chemicals. It does a great job of what I call clumping up small dust/dirt particles making it easier for the filter to remove them. It will not “turn you water blue,” but it does make the water crystal clear, and makes it sparkle. If you happen to have a liner with lots of blue in the pattern, it will make the water “appear” to be bluer, but all it does is remove fine particles, & makes the water crystal clear. I use it once a week, and dose after heavy rains. I’ve used it for 20 years, have tried others, but always come back to this.
Question:	I have an Intex Metal Frame Pool with a Saltwater Pump and Filter System. Will this product work with that type of set up
Answer:	Yes it stated on the bottle that it will work salt, and all types of filters/pumps.

• Sit back and relax while the Nautilus CC cleans the pool for you. Ideal for small pools up to 33 feet, this compact cleaner will have your pool ready for splashing fun in just 2 hours
• Efficiency is key when it comes to pool cleaning. Unlike suction and pressure cleaners, Dolphins are 8 times more energy efficient and do not rely on your pool pump or filter to get the job done. Ditch the pumps and hose and save energy with every pool cleaning
• Dolphin does all the hard work for you. Agile and efficient, the Nautilus CC was designed to clean your pool, effortlessly. With superior scrubbing and filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean
• Clean your pool with the touch of a button. Schedule the Nautilus CC to automatically clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends

User questions & answers

Question:	Is this all set to use when you get it
Answer:	yes, plug it in and turn it on. it works great! I haven't messed with the schedule set up yet but it states you can pick days and it will auto clean
Question:	Can you use the ultra fine filters on this model? I notice it is standard on the Triton model, but it looks like the same configuration as this model
Answer:	Hello, Yes you can use the ultra fine filters with this unit, you just have to buy it since it does not come with it
Question:	How does this unit compare to the tigershark
Answer:	I had a Tigershark and the basket was a pain in the butt to clean. It also would let a lot of debri back in the pool when you pulled it out. I also had the motor go out and then the next year it stopped working. It came out when everyone else was using cloth bags to catch debri. At that time the Tiger Shark was the king but there are better designed models out there unless Hayward re-designed the unit.
Question:	will this work on a pool with 20,000 gallons capacity
Answer:	Yes. My pool holds 20,000 gallons and this machine works perfectly. A true timesaver.

Product features

Sucks Debris. Not Energy

With an average operating cost of 5 cents per hour, you don’t have to sacrifice a high energy bill for a clean pool.

Compact and Nimble

This robot climbs and cleans the walls with ease. It’s versatile and works on any pool surface type- gunite, tile, plaster, and everything in between.

Always Easy to Handle

The quick water release helps keep the Nautilus CC lightweight and easy to remove from the pool.

Nautilus CC Packaging List

Ideal Pool Length: Up to 33 ft.

Cleaning Coverage: Floor and walls

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 50 ft.

Suction Rate: 4000 GPH

Robot Weight: 13.8 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to set the weekly timer

When the power supply is switched on, you can press the weekly timer button to select one of the following cleaning schedules for the week ahead: One click: The robot will automatically work every day for a full cycle. This cycle will have the robot clean seven times in a week. Two clicks: The robot will automatically work every other day for a full cycle; that is four times in a week. Three clicks: The robot will automatically work every three days; that is three times in a week. A fourth click will cancel the cleaning schedule program. After selecting one of the schedule options, the robot will start to operate at the next occurrence of the programed start time. If the robot is working in the weekly timer mode, the weekly timer button will constantly blink between cycles. At the end of the week, the power supply will automatically switch off and you will need to reschedule the robot.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to clean the filters

Cleaning the filters are simple. Just remove the filter(s) from the robot, release the latch to let the dirt and debris fall out, and then hose off any remaining debris. Do not let the filters dry out before cleaning them. Clogged filters reduce the effectiveness of the cleaning. We suggest cleaning your filters every two months. Bag filters can be washed in the washing machine at 30 degrees, using a synthetic wash cycle, and allow to air dry. Cartridge filters can be clean in the dishwasher at 30 degrees. Although the filters may look clean, small particles may dry into the filter material and clog the filters.

Product description

The Zodiac MX6 is a compact yet powerful, ultra-efficient, suction side pool cleaner that features best in class vacuum power and programmed navigation for a totally clean pool without all the hassle. With an innovative low-flow design, it consumes less energy than any cleaner in its class, making it ideal for pools with 2-speed and variable speed pumps. The MX6 also incorporates cyclonic suction for powerful vacuuming and an articulating turbine blade for aggressive wall-climbing. Swiveling hoses are quick-connect style for easy assembly and a flow regulator controls the water flow so there is nothing to adjust at the skimmer. Includes 8. 4m of hose and is backed by a 1 year .Cleaner Type : suction cleaning robot

• Innovative low-flow design makes it ideal for pools with 2-speed or variable speed pumps
• Cyclonic suction for powerful vacuuming and articulating turbine blade for aggressive wall-climbing
• Swiveling hoses are quick-connect style for easy assembly
• Includes automatic Weir Valve, 90° Twist Lock Elbow, 7 x 1.2m Twist Lock Hose Lengths, Flow Regulator Valve, Hose Float, Hose Protector, Warranty Card.

User questions & answers

Question:	Does it fit any pool
Answer:	This product works in both in-ground and above ground pools, and is suitable for all pool surfaces, including concrete/gunite, vinyl, tile & fiberglass.
Question:	I have earth on the bootom of my pool. will it pick up material as fine as Earth
Answer:	i dont know what you mean by earth? it has a fan on the bottom of this unit that creates suction. it cleans the bottom and sides of my pool. long palm frans get stuck in the unit that you will need to remove.
Question:	Does this machine still have warranty
Answer:	It comes with a one year warranty.
Question:	I have a 1/2 horse power motor, will it work with that
Answer:	Put your vacuum hose in a 5 gal bucket of water. If your pump will suck that dry in 10 seconds, then this cleaner will work fine for you. If not, then I would avoid it.

Product description

• Polaris Vac-Sweep 280 pressure side pool cleaner
• Works in all in-ground pools; requires Polaris booster pump. Pool Type / Surface - Inground / All
• Palletized in multiples of 16 units ;TailSweep PRO Compatibility-YES
• Ready to connect to 1.5-inch dedicated pressure cleaner line
• Includes 31-feet of feed hose.Vacuum Inlet:2.25 inches
• Compatible with model Polaris 480 and 280 cleaner. NOT COMPATIBLE with Polaris 360 and 380 model pool cleaner

User questions & answers

Question:	Is the polaris 280 all-wheel drive? That is, is the single wheel on the opposite side of the tandem two also powered
Answer:	It is two wheel drive one wheel on the two wheel side and one on the opposite side. The third wheel is for balance.
Question:	I have a 280, which is about to go into nether-nether land. Will the 360 connection fit into the original 280 opening on the pool wall
Answer:	My 360 replaced a Polaris 180 and did fit the same pool wall connection. I think all models have the same connectors. James
Question:	Does the 360 come with the fatter hose
Answer:	No. I use the same hose as I had for the old Polaris that had to have a booster motor.
Question:	what comes with the F5 Polaris vac-Sweep 280 for
Answer:	A new attachment for pool wall, 30' of tubing with floats attached, check valve for movement reversal, and of course the 280 and debri trap. Basically if you had one before you just plug this one in. Great deal.

Product features

Excellent Performance

Vacuums, sweeps and scrubs the floor and walls.

Powerful Debris Intake

Large opening for big debris such as leaves, acorns, and pebbles. Plus, dual venturi jet vacuum for powerful intake.

Large Capacity Filter Bag

Collects debris before it reaches the pump basket and filter to reduce filter cleaning and prolong the life of your pool’s filtration system.

Continuous Cleaning

In-line back-up valve automatically frees the 280 if it gets cornered and keeps it cleaning without interruption.

Works with a Booster Pump

A Polaris booster pump provides optimal power so your cleaner can pick up even the largest debris, while circulating clean, warm water throughout all areas of the pool.

Note: Booster Pump Sold Separately.

Product description

Hayward’s Poolvergnuegen 4-Wheel Suction PoolCleaner uses your existing pool pump and filter for power—simply plug it into the designated suction port or the skimmer for quick an easy setup. Featuring patented self-adjusting turbine vanes, PoolCleaner delivers maximum power at any flow and allows passage of larger, more stubborn debris. Patented tire treads enhance climbing ability and obstacle maneuverability while patented adjustable roller skirts allow the cleaner to maintain optimal suction on uneven surfaces and when encountering obstacles. Multiple pre-programmed internal steering sequences ensure complete pool coverage—PoolCleaner travels 11 to 14 feet before turning, and turns can range from 90 to 540 degrees. For larger pools or pools with deep ends up to 20’ x 40’, the 4-wheel Poolvergnuegen PoolCleaner is a powerful, efficient choice.

• The Hayward Poolvergnuegen 4-Wheel Suction PoolCleaner features patented self-adjusting turbine vanes that deliver maximum power at any flow and allow passage of large debris
• 4-wheel drive cleans larger pools or pools with deep ends up to 20’ x 40’
• Patented tire treads enhance climbing ability and obstacle maneuverability
• Multiple pre-programmed internal steering sequences ensure complete pool coverage and efficient cleaning
• Patented adjustable roller skirts allow the cleaner to maintain optimal suction on uneven surfaces and when encountering obstacles

User questions & answers

Question:	We have lots of curves by the steps and seating area. Our kreepy krawly gets sticks and the hose hurts the finish. Does this one get stuck as easily
Answer:	This is a great replacment for Kreepy Krauly that do not clean the entire pool or miss spots due to steps or curved walls.
Question:	does the this vacuum come with hoses
Answer:	Yes, hoses are included.
Question:	Does this unit come with a automatic back up device
Answer:	If by "back up" you mean the ability for the device to back itself up and turn around if stuck in a corner or something ... then yes, it will turn around on its own if it get stuck after 20-30 seconds.

Product features

The PoolCleaner

The PoolCleaner is a suction cleaner available in 2 or 4-wheel drive to suit any pool size. Patented features such as self-adjusting turbine vanes ensure maximum power at any flow and effortless debris management. Adjustable skirt and tire treads work in concert with programmed steering to ensure easy wall-climbing, obstacle management and maximized pool coverage.

Self-Adjusting Turbine Vanes

All of The PoolCleaner models have patented self-adjusting turbine vanes. The flexible vanes ensure maximum power at any flow. Their ability to move allows easy passage of large debris to ensure full cleaning with peace of mind.

Robust Tire Treads

One look and you will see the patented tire treads give The PoolCleaner enhanced climbing ability and obstacle maneuverability - especially with main drains. This makes The PoolCleaner ideal for all pool surfaces and shapes.

Steering System

The PoolCleaner has multiple pre-programmed internal steering sequences, which cause the left wheel to periodically reverse, allowing it to turn and then move into another direction. This feature ensures full pool coverage and efficient cleaning.

Interchangeable Throats

3 interchangeable throats allow optimization of suction performance at lower flow and larger debris passage. As such, it is the ideal suction cleaner for use with variable speed pumps.

Product description

Hayward’s Poolvergnuegen 4-Wheel Suction PoolCleaner uses your existing pool pump and filter for power—simply plug it into the designated suction port or the skimmer for quick an easy setup. Featuring patented self-adjusting turbine vanes, PoolCleaner delivers maximum power at any flow and allows passage of larger, more stubborn debris. Patented tire treads enhance climbing ability and obstacle maneuverability while patented adjustable roller skirts allow the cleaner to maintain optimal suction on uneven surfaces and when encountering obstacles. Multiple pre-programmed internal steering sequences ensure complete pool coverage—PoolCleaner travels 11 to 14 feet before turning, and turns can range from 90 to 540 degrees. For larger pools or pools with deep ends up to 20’ x 40’, the 4-wheel Poolvergnuegen PoolCleaner is a powerful, efficient choice.

• The Hayward Poolvergnuegen 4-Wheel Suction PoolCleaner features patented self-adjusting turbine vanes that deliver maximum power at any flow and allow passage of large debris
• 4-wheel drive cleans larger pools or pools with deep ends up to 20’ x 40’
• Patented tire treads enhance climbing ability and obstacle maneuverability
• Multiple pre-programmed internal steering sequences ensure complete pool coverage and efficient cleaning
• Patented adjustable roller skirts allow the cleaner to maintain optimal suction on uneven surfaces and when encountering obstacles

User questions & answers

Question:	I heard it had a lead hose and Float clamps is that accurate
Answer:	It has a rubber type hose, float clamps that you can adjust to your needs. Highly recommended!
Question:	Does the Hayward currently have a $100 cash card promotion on this product through Amazon
Answer:	Not that I was aware of.
Question:	Is this a suction side pool sweep
Answer:	It sweeps the bottom very well but it doesn’t go up the walls. If you have lifted drain covers on the bottom of your pool it often gets stuck on them, I’ve adjusted the weights on the hose so many times and I still haven’t had very much luck with getting them exactly right to stop getting stuck on the drain covers.
Question:	Are there any drawbacks to using a 4 wheeler in a small pool (15,000 gallons) rather than the 2 wheeler
Answer:	Not in my opinion. The 4 wheel is said to climb walls better, but really neither one climbs that well. Not like a Kreepy Krawly. However, the 4 wheel seems to have more stability and not get stuck on its side (from reviews). My friend has a 2 wheel 15 x 30 pool. I have a 16 x 32 with a deep end. Apparently the 4 wheel does better in deep water. I think either one would work for you.

Product features

The PoolCleaner

The PoolCleaner is a suction cleaner available in 2 or 4-wheel drive to suit any pool size. Patented features such as self-adjusting turbine vanes ensure maximum power at any flow and effortless debris management. Adjustable skirt and tire treads work in concert with programmed steering to ensure easy wall-climbing, obstacle management and maximized pool coverage.

Self-Adjusting Turbine Vanes

All of The PoolCleaner models have patented self-adjusting turbine vanes. The flexible vanes ensure maximum power at any flow. Their ability to move allows easy passage of large debris to ensure full cleaning with peace of mind.

Robust Tire Treads

One look and you will see the patented tire treads give The PoolCleaner enhanced climbing ability and obstacle maneuverability - especially with main drains. This makes The PoolCleaner ideal for all pool surfaces and shapes.

Steering System

The PoolCleaner has multiple pre-programmed internal steering sequences, which cause the left wheel to periodically reverse, allowing it to turn and then move into another direction. This feature ensures full pool coverage and efficient cleaning.

Interchangeable Throats

3 interchangeable throats allow optimization of suction performance at lower flow and larger debris passage. As such, it is the ideal suction cleaner for use with variable speed pumps.

Product description

The Zodiac G3 In-Ground Suction Pool Cleaner is a quiet and powerful suction cleaner that works with low-speed pumps to clean with maximum efficiency. The G3 will devour small and medium-sized debris without trouble to ensure the floor, walls and steps of your entire pool receive a thorough cleaning.

Premium Efficiency

The Zodiac G3 is compatible with any single, two-speed or variable-speed pumps to clean more efficiently and with less flow. G3 suction cleaners work with a FlowKeeper Valve that automatically regulates water flow, to maintain peak cleaning performance even with lower horsepower pumps. Plus, Flowkeeper offers pool surface skimming with a turn of a switch Intelligent Design

Navigating an in-ground pool is made easier by the Wheel Deflector which helps with movement around tight corners. Equipped with scuff-resistant Long-Life Hoses, the G3 is a rugged pool cleaner that is eliminates scuffs on all pool surfaces. The 36-Fin Disc is cleverly designed to increase adhesion to the pool surface and avoid getting hung-up on lights, drains covers, fittings and other pool features.

The G3 has a durable Long-Life Diaphragm with reliable, one-moving-part-technology that eliminates the need for wheels, flappers or gears to provide silent operation and low-cost maintenance. The patented Quick-Release Cassette provides easy access to the diaphragm for simplified routine maintenance.

Convenient Installation

The G3 suction cleaner works in all in-ground pools and can be installed in two simple steps:

1. Attach the disc, wheel deflector and hose

2. Connect to the skimmer or dedicated suction line

* No tools or special plumbing required *

• Quiet, powerful suction cleaner; works with low-speed pumps for maximum efficiency.
• Devours small and medium-sized debris and cleans floor, walls and steps of your entire pool.
• FlowKeeper Valve automatically regulates water flow to maintain peak cleaning performance even with lower horsepower pumps.
• Wheel Deflector for movement around tight corners.
• Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces.
• 36-Fin Disc increases adhesion to pool surface and avoids getting hung-up on lights, drains covers, fittings and other pool features.
• Durable Long-Life Diaphragm with reliable, one-moving-part-technology

User questions & answers

Question:	made in china
Answer:	Lol, I don’t think so but I didn’t check. Google it, lol
Question:	Do you need to buy the additional scrub disk
Answer:	I live in Florida where the cleaner runs 5-6 hours per day 365 days per year and a scrub disk last at least three years. Save your money and wait until you need a new one and you can get it cheaper buying it by itself than the cleaner with an extra scrub disk package deal.
Question:	Can I replace a G2 with a G3 without any special modifications? Are they interchangeable
Answer:	You should be able to replace the G2 with the G3, with out problems.However, check the hose weight placement on the first hose BEHIND the G3 and check the suction at the end of the LAST hose, before attaching the G3. If you want a WONDERFUL addition, and I would HIGHLY recommend it, buy the TWISTER and add it between the first and second hose sections at the wall or basket strainer connection. It will COMPLETELY eliminate the hose curling and allow the vacuum to access ALL point of the pool. Even the STEPS!! It's wonderful!
Question:	Does the G3 come with hoses
Answer:	yes hoses come with - our pool 21ft wide and 42 ft long - needed to purchase extra for the cleaner to reach whole pool - however can always leave at one end one day and switch it to the other end later or next day - cleaner is a work horse!

Product features

Baracuda G3 Suction Cleaner

The G3 suction cleaner is a versatile in-ground suction cleaner that delivers superior performance and is compatible with low-speed pumps for maximum efficiency. Quick and easy to set up, this compact cleaner effectively inhales small and medium debris while thoroughly cleaning pool floors, walls and steps.

Only One Moving Part

The G3 has a Long-Life Diaphragm providing superior reliability. Plus, a Quick-Release Cassette makes it easy to access the diaphragm when needed.

One Cleaner Fits All

Concrete, tile or vinyl, the G3 works on them all. The 36-Finned Disc provides a wide cleaning path and adheres to any surface, maximizing surface area and suction for a more efficient cleaning with reliable and noticeable results.

Ease of Movement

Navigate tight corners with enhanced agility. The Wheel Deflector prevents the cleaner from getting stuck, ensuring continuous cleaning.

• Hand off your pool cleaning duties for good! With the Triton PS, your pool will be left clean and ready for splashing fun in just 2 hours. Ideal for pools up to 50 feet, sit back and relax while Dolphin does all the hard work for you.
• Built to deliver a deep clean. The Triton PS is powerfully nimble on vertical surfaces for intense wall and waterline scrubbing. With superior filtering capabilities, dirt and debris can't hide from this underwater cleaning machine.
• Sustainably designed and energy efficient. Unlike suction and pressure cleaners, Dolphins are independent cleaning machines that do not rely on your pool pump or filter to get the job done. Extend the life of your pool’s system and save energy with every pool cleaning.
• Say, “hello” to your newfound free time. Schedule the Triton PS to automatically clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day. Pool cleaning has never been easier
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends.

User questions & answers

Question:	Can this be left in the pool
Answer:	I have to lift the Triton and remove the basket from the Triton to wash out the debris. I can move the Triton to the pool step to do this.
Question:	Why isn’t my basket filling up it’s not jamed
Answer:	The first time I used the robot, it ran for less than 30 minutes and stopped working. I checked the basket and it was FAR from full! I though that I had a lemon, but later realized that the vent looking thing on top of the robot was full of debris. I don't know what you call that part, but it has holes that kinda look like the shape of a honeycomb and it's right on top and water circulates through it or something. Apparently, if it's clogged w/ debris, the robot will stop working. I had to get my water hose and wash that out and it worked perfectly fine after that. My only complaint is that I have to do that quite a bit. So, although I have a big basket, mine never gets a chance to get full. That may just be my experience, but that's my greatest issue at this point. However, it cleaned the pool well, climbed the walls and even climbed onto the built in bench!
Question:	Does the cord get tangled on the new triton power stream models
Answer:	I have been using the vacuum for about 3.5 weeks since I received mine from Amazon. So far, I have had no issues with the tangling of the cord whatsoever. I must have used this vacuum literally 15x because my pool was filthy when I opened. The Unit has performed very well. I previously owned the Dolphin Dynamic where you had to alternate the handle to avoid the cord tangling. Even with that machine, I never really had issues. This machine is much lighter and easier to clean than my past unit. So far, I am extremely happy with it.
Question:	New unit is underwhelming. its missing a lot of dirt and leaves. now on 4th cycle. am i doing something wrong? expected better cleaning than this
Answer:	To pick up big stuff remove the bag from the chute. That allows it to pick it up without getting clogged. Do put the bag bag for regular cleaning so it will get all the smaller particles. This is the 2nd Dolphin I've had and they both work wonderfully!

Product features

Dirt & Debris Doesn’t Stand a Chance

The Triton PS has superior filtering capabilities. It traps and locks-in all sorts of dirt and debris so you pool is left exceptionally clean

Get a Really Clean Pool

This Dolphin intensely scrubs the pool’s floor, walls and waterline for you. Gone are the days of manual brushing.

Always Easy to Handle

The quick water release makes it easy to remove from the pool. Don’t worry, it only lets the water out and not the stuff trapped in the basket.

Triton PS Packaging List

Ideal Pool Length: Up to 50 ft.

Cleaning Coverage: Floor, walls, and waterline

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 60 ft. Tangle-free cable

Suction Rate: 4000 GPH

Robot Weight: 16.5 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to store/roll/operate cable

When your Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

• Drop and go. Easy to use, single button plug and play in-ground robotic pool cleaner ideal for pools up to 50 feet; backed by a 3 year quality assurance.
• CleverClean delivers a smart and efficient clean using advanced algorithms for complete pool coverage. Anti-tangle patented swivel cable allows your Dolphin to move around your pool with ease.
• Powerful, dual scrubbing brushes forcefully attack tough dirt and debris leaving your swimming pool floor, walls and waterline exceptionally clean in 3 hours.
• Multiple filter options for an optimal clean pool. The Premier comes standard with three filter options: bottom-load fine cartridge filters, ultra-fine cartridge filters, and an oversized fine filter bag.
• Cleaning made convenient. Set the Premier’s weekly scheduler to automatically clean for you- every day, every other day, or every 3rd day. The full filter indicator lets you know when it’s time to clean your filter.

User questions & answers

Question:	Does it come with a caddy and remote
Answer:	This listing is only for the unit. The Caddy and Remote are purchased separately!
Question:	Does this clean the seating ledge and steps
Answer:	the wheels need to be submersed in water as they act like a ballast. the machine sinks back down when the water drains from the wheels. This is good so the machine doesn't climb out of the pool. if your ledge & seating area are shallow, 24 inches, then no, the machine will not clean those parts. we use a pool brush to get the shallow bits before we activate the dolphin. we have pebbletech & the scrubbers do a fantastic job of cleaning
Question:	How do I choose between the bag vs the filter for my pool
Answer:	When you buy the premier both bag and filter comes with the purchase. Both of them I use. If you have a. Lot of debris and leaves use the bag, then the next day filter. Its took me a month to research all the robotics pool cleaner and i like the performance of this one. Worth the price with 3yrs warranty. Leo
Question:	Anyone know if this will get stuck on raised drains on bottom of pool
Answer:	Yes, it rarely gets stuck on our drain, maybe once every 10 cleanings. However, Maytronics provides a free outlet flow diverter attachment (I had to call to request) that gives the cleaner a little more forward push. It is definitely an improvement, although not perfect, now it gets stuck maybe once every 20 cleanings.

Product features

One Robot. Four Media Types.

Includes three media types: micro-cartridges, standard cartridges and oversized leaf/debris bag. Multi-Media is a Premier Exclusive. Disposable debris bags are available.

Scrubs Floor, Wall, & Tile/Waterline

In a radical departure from ordinary cleaners, Premier was designed to clean all pool surfaces including the tile and waterline with pinpoint precision.

Ultra-Efficient Twin DC Motors

Dual 24 volt DC motors and dual scrubbing brushes clean every square inch. Premier operates on 90% less energy than old-fashioned suction and pressure cleaners.

Complete Pool Coverage

Smart Nav software delivers highly optimized scanning and coverage for a new level of clean. Advanced algorithms clean 100% of the pool floor, wall & tile/waterline and pool floor.

Advanced Weekly Control

Some robots must be turned on manually each day. Smart control weekly timer works automatically at the desired interval. LED full indicator light alerts when it's time to empty.

No Tangle. No Hassle.

Anti-Tangle patented swivel technology provides uninterrupted hassle-free cleaning. One of the greatest engineering accomplishments in the pool robot industry.