3 best inground pool vacuum

• Hello, free time! Let the Nautilus CC Plus take over your pool cleaning duties for good. Ideal for swimming pools up to 50 feet, this cleaner will leave your pool sparkling clean in just 2 hours. Spend more time enjoying your pool and less time cleaning.
• The clean you need without the hassle. The Nautilus CC Plus was designed to clean your pool, effortlessly. With dual scrubbing brushes and superior filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean.
• Ditch the pumps and hose. Unlike the energy hogs that are pressure and suction cleaners, Dolphins are independent cleaning machines and do not rely on any additional equipment to get the job done. Save energy with every pool cleaning.
• Clean your pool with the touch of a button. Schedule the Nautilus CC Plus to clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day. Pool cleaning has never been easier!
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends.

User questions & answers

Question:	Does it clean and clime walls and steps
Answer:	Ours cleans all but top step of granite-look composite steps, 4x8. Gets stuck for 30 sec., tops, then blasts away & backs-up. Also does vertical waterline of vinyl pool beautifully & climbs walls. Never a dirty pool; we change & wash filters each use, 2 uses if not very dirty. We usually use 2 hr. cycle daily & store it on stand, covered. Pool gets cleaner & cleaner. CRYSTAL clear water at night in light. So happy.
Question:	how many volts
Answer:	The Dolphin has a power pack with free universal voltage of 100 - 240v. It can be used worldwide. Thanks.
Question:	Is this cleaner OK to use in either salt water pools and chlorine? I'm thinking of converting my chlorine pool to salt water next year
Answer:	Yes. It’ll work in either. “Salt Water” pools are chlorine pools. You add salt and stabilizer and the chlorinater turns it into chlorine. It’s just a lot less chlorine. My pool is this type.
Question:	where does the filtered water exit? top or rear? i had a cleaner with a rear exit and it kept disturbing debris on the pool so it never got it very cl
Answer:	The water is pulled through the bottom as it vacuums. The debris and water is filtered though 4 sizable filters. The resulting filtered water is then expelled through the top of the device. This device is a bulldog and cleans dirt, dead algae and leaves from your pool in one round. If the whole bottom is covered in leaves, you need to do your best to get them up and finish off with the Dolphin. This device saves me from vacuuming by hand for half the day. Also, the dirt, dead algae and general crud doesn't go through your pool filter. It completely removes it all without the risk of it going right back in and it doesn't stir up the bottom and settle back down after you vacuum. Come back a few hours later and it's still clean.

Product features

Goodbye, Debris!

The Nautilus CC Plus has superior filtering capabilities. It traps and locks-in all sorts of dirt and debris, so your pool is left exceptionally clean.

Effortless Cleaning

Tangle-free cable allows the Nautilus CC Plus to move freely around the pool with ease.

A Clean for Every Pool

Nautilus CC Plus is perfect for all pool types. From gunite to tile, and everything in between; you name it, and Dolphin will clean it.

Nautilus CC Plus Packaging List

Ideal Pool Length: Up to 50 ft.

Cleaning Coverage: Floor and walls

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 60 ft. Tangle-free cable

Suction Rate: 4500 GPH

Robot Weight: 19 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to use the power supply

Make sure the power supply is placed at least 12 feet from the edge of the pool. Connect the floating cable to the power supply, align the lug on the connector with the notch of the plug on the power supply, then turn clockwise. Press the ON/OFF button on the power supply to begin cleaning. The power supply for your Dolphin is not waterproof- it is water resistant. When in use, make sure it was either stored on the caddy or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to store/roll/operate cable

When you Dolphin is in use, only release enough of the cable for your Dolphin to properly cover your pool. Leave the excess cable loosely rolled outside of the pool. When storing your Dolphin on a caddy, carefully wrap the cable so it does not have any kinks and place it around the top of the caddy. Once a week, unplug the cable from the power supply and unwind the tangled portions of the cable, straighten it out and leave in the sun for a few hours. This will help remove any tangling or kinks.

Product description

The Zodiac MX6 is a compact yet powerful, ultra-efficient, suction side pool cleaner that features best in class vacuum power and programmed navigation for a totally clean pool without all the hassle. With an innovative low-flow design, it consumes less energy than any cleaner in its class, making it ideal for pools with 2-speed and variable speed pumps. The MX6 also incorporates cyclonic suction for powerful vacuuming and an articulating turbine blade for aggressive wall-climbing. Swiveling hoses are quick-connect style for easy assembly and a flow regulator controls the water flow so there is nothing to adjust at the skimmer. Includes 8. 4m of hose and is backed by a 1 year .Cleaner Type : suction cleaning robot

• Innovative low-flow design makes it ideal for pools with 2-speed or variable speed pumps
• Cyclonic suction for powerful vacuuming and articulating turbine blade for aggressive wall-climbing
• Swiveling hoses are quick-connect style for easy assembly
• Includes automatic Weir Valve, 90° Twist Lock Elbow, 7 x 1.2m Twist Lock Hose Lengths, Flow Regulator Valve, Hose Float, Hose Protector, Warranty Card.

User questions & answers

Question:	Does it fit any pool
Answer:	This product works in both in-ground and above ground pools, and is suitable for all pool surfaces, including concrete/gunite, vinyl, tile & fiberglass.
Question:	I have earth on the bootom of my pool. will it pick up material as fine as Earth
Answer:	i dont know what you mean by earth? it has a fan on the bottom of this unit that creates suction. it cleans the bottom and sides of my pool. long palm frans get stuck in the unit that you will need to remove.
Question:	Does this machine still have warranty
Answer:	It comes with a one year warranty.
Question:	I have a 1/2 horse power motor, will it work with that
Answer:	Put your vacuum hose in a 5 gal bucket of water. If your pump will suck that dry in 10 seconds, then this cleaner will work fine for you. If not, then I would avoid it.

• Sit back and relax while the Nautilus CC cleans the pool for you. Ideal for small pools up to 33 feet, this compact cleaner will have your pool ready for splashing fun in just 2 hours
• Efficiency is key when it comes to pool cleaning. Unlike suction and pressure cleaners, Dolphins are 8 times more energy efficient and do not rely on your pool pump or filter to get the job done. Ditch the pumps and hose and save energy with every pool cleaning
• Dolphin does all the hard work for you. Agile and efficient, the Nautilus CC was designed to clean your pool, effortlessly. With superior scrubbing and filtering capabilities, you can relax knowing your pool’s floor and walls are left exceptionally clean
• Clean your pool with the touch of a button. Schedule the Nautilus CC to automatically clean your swimming pool each week using 3 settings- every day, every other day, or every 3rd day
• With more than 35 years of cleaning the world’s residential swimming pools, Dolphins provide pool owners with a hassle-free cleaning solution of unmatched performance and longevity. Get back to what really matters; spending time with family and friends

User questions & answers

Question:	Is this all set to use when you get it
Answer:	yes, plug it in and turn it on. it works great! I haven't messed with the schedule set up yet but it states you can pick days and it will auto clean
Question:	Can you use the ultra fine filters on this model? I notice it is standard on the Triton model, but it looks like the same configuration as this model
Answer:	Hello, Yes you can use the ultra fine filters with this unit, you just have to buy it since it does not come with it
Question:	How does this unit compare to the tigershark
Answer:	I had a Tigershark and the basket was a pain in the butt to clean. It also would let a lot of debri back in the pool when you pulled it out. I also had the motor go out and then the next year it stopped working. It came out when everyone else was using cloth bags to catch debri. At that time the Tiger Shark was the king but there are better designed models out there unless Hayward re-designed the unit.
Question:	will this work on a pool with 20,000 gallons capacity
Answer:	Yes. My pool holds 20,000 gallons and this machine works perfectly. A true timesaver.

Product features

Sucks Debris. Not Energy

With an average operating cost of 5 cents per hour, you don’t have to sacrifice a high energy bill for a clean pool.

Compact and Nimble

This robot climbs and cleans the walls with ease. It’s versatile and works on any pool surface type- gunite, tile, plaster, and everything in between.

Always Easy to Handle

The quick water release helps keep the Nautilus CC lightweight and easy to remove from the pool.

Nautilus CC Packaging List

Ideal Pool Length: Up to 33 ft.

Cleaning Coverage: Floor and walls

Cleaning Cycle Time: 2 hours

Pool Surface Type: Cleans all pool surface types

Power Supply Features: On/Off, Weekly Scheduler

Cable Length: 50 ft.

Suction Rate: 4000 GPH

Robot Weight: 13.8 lbs.

How long can I leave my Dolphin in the pool?

We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

How to set the weekly timer

When the power supply is switched on, you can press the weekly timer button to select one of the following cleaning schedules for the week ahead: One click: The robot will automatically work every day for a full cycle. This cycle will have the robot clean seven times in a week. Two clicks: The robot will automatically work every other day for a full cycle; that is four times in a week. Three clicks: The robot will automatically work every three days; that is three times in a week. A fourth click will cancel the cleaning schedule program. After selecting one of the schedule options, the robot will start to operate at the next occurrence of the programed start time. If the robot is working in the weekly timer mode, the weekly timer button will constantly blink between cycles. At the end of the week, the power supply will automatically switch off and you will need to reschedule the robot.

How to take the robot out of the pool?

Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the cable.

How to clean the filters

Cleaning the filters are simple. Just remove the filter(s) from the robot, release the latch to let the dirt and debris fall out, and then hose off any remaining debris. Do not let the filters dry out before cleaning them. Clogged filters reduce the effectiveness of the cleaning. We suggest cleaning your filters every two months. Bag filters can be washed in the washing machine at 30 degrees, using a synthetic wash cycle, and allow to air dry. Cartridge filters can be clean in the dishwasher at 30 degrees. Although the filters may look clean, small particles may dry into the filter material and clog the filters.