12 best brush master chipper shredder

• Fits 420CC 15HP Gasoline Engines

User questions & answers

Question:	Does this item include the necessary gaskets to install
Answer:	Hello,There is no alcohol ingredient. Please see below IngredientsAloe Barbadensis Leaf Water, Sodium Hyaluronate, Snail Secretion Filtrate, Glycerin, Zanthoxylum Piperitum Fruit Extract, Pulsatilla Koreana Extract, Usnea Barbata (Lichen) Extract, Salicylic Acid(0.5%), Arginine, Althaea rosea flower extract, Aloe barbadensis leaf extract, Aloe Barbadensis Leaf Juice, Beta-Glucan, Polyglutamic Acid, Aspalathus Linearis Extract, Portulaca Oleracea Extract, Psidium Guajava Fruit Extract, Acrylates/ C10-30 Alkyl Acrylate CrosspolymerThank you for your interest in Benton.
Question:	Is this the end adjustable carburetor
Answer:	Basically Aloe BHA Skin Toner contains aloe, bha ingredients and Snail Bee skin contains snail bee secretion filtrate. It depends on you whether you prefer Aloe to Snail Bee or not.
Question:	Will it fit an 11 HP brush master engine
Answer:	I have not tested the ph, but I would 99.99% guarantee this is 5.5 or a little lower. I break out from anything that isn't extremely close to skin's natural ph and this gives me no problems.

• Replacement parts,non original
• Fit brush master DEK chipper shredder CH1 CH4 420cc 15HP gasoline engine
• Package include 1pc carburetor + 3pcs gaskets + 1pc HURI pocket tape
• Note:you could apply for a full refund if you didn't receive HURI branded pocket tape.

User questions & answers

Question:	I would like to add an inline fuel cutoff switch. Is the fuel line a standard
Answer:	I think it is better than Skinceuticals.it gives face a bit of a glow. I don't think toners are moisturizing as they have alcohol in them. I think it does what it says on the bottle.
Question:	Will this fit the brush master ch4 14 hp
Answer:	Unfortunately, the bottle is not stamped with the expiration date, and I have since thrown away the box it was packaged in. I am confident that my product purchase is fresh as it smells like it should and works great. Additionally, I only buy from sellers with a good track record of 95% or higher. If the expiration date is of concern still, I would call SkinMedica's customer service department and ask: www.skinmedica.comI hope this helps.
Question:	Will it fit an 11 hp brush master engine
Answer:	The Obagi doesn't help with pores, Phuong. It just lightens & erases dark spots. Go to th TrueBeauty.com website & check out the Obagi Nuderm Products. Obagi CLEAR you use 1x in the am after cleansing & toner. Oh yes, the reason I use the IS Clinical Cleanser in the Blue Bottle (you can get it on Amazon - you can even buy a little amount to try it. The regular size is $30 but it can last you up to 4 months. You only need to use a little bit - this cleanser is the BEST ant-acneic cleanser I've ever used & I've tried EVERYTHING. The IS Clinical plus the Skinmedica Toner is what my Dermatologist recommended for me. Even though I'm 60 I still break out with adult acne, but these products work very well.Back to the Obagi, go to their website too & you can educate yourself on their lightening products. But I DO use SkinMedica RETINOL, also recommended by my dermatologist. Start out with the lowest %. When you use any of these products you should be using actually MUST USE at LEAST a 20SPF Sunscreen. The purpose of the RETINOL is to EXFOLIATE EXFOLIATE EXFOLIATE! You will peel at first, but then your skin will get used to it & you can work up the higher percentages of Retinol for better, faster results. God bless you!
Question:	Are all the parts needed to replace an old carburetor included? The description says it comes with 3 gaskets. Are there any other parts needed
Answer:	no it's a moisturizing toner, it helps your skin absorb whetever lotions/creams you put on afterwards

• Brand New High Quality Replacement Carburetor With 3 Gaskets
• Fit for DEK Branded Brush Master Gasoline Chipper Shredder Models CH6 Powered by a 208CC/6.5HP Engine
• Models CH6
• Ships from China.
• Please note the delivery time takes 10 to 20 days because of the recent delay at USPS. Please be aware of the delivery time before purchase.

• Brand New - Aftermarket - Lumix GC - Carburetor + Gasket + Insulator
• Fits Brush Master - DEK CH1, CH4, 420CC - Engine / Motor -15HP Chipper Shredder
• Ships from the USA!

• Fit For CH3 DEK Brush Master Gasoline Chipper Shredder
• Carburetor replaces For 401CC/11HP/13HP Engine
• ATTENTION：Please check the size for compatibility before ordering it.
• Please send us pictures of your current carb if you can't be sure about the match yourself, we can help find the right mode for you.
• You will get: 1 carburetor,1 fuel filter,1 fuel line,1 spark plug,1 joint fuel filter,3 gasket,1 insulator as pictured

• Fit For CH1 CH4 Brush Master DEK
• Carburetor replaces For 420CC 15HP Chipper Shredder Gas Engine
• ATTENTION：Please check the size for compatibility before ordering it.
• Please send us pictures of your current carb if you can't be sure about the match yourself, we can help find the right mode for you.
• You will get: 1 carburetor,1 fuel filter,1 fuel line,1 spark plug,1 joint fuel filter,3 gasket,1 insulator as pictured

• Brand New High Quality Ignition Coil
• Fit For DEK Branded Gasoline Products
• Models: CH1 CH3 CH4 CH8

• EFCUT C30 Wood Chipper Shredder has a 15.6 inch cutting rotor with 2 blades + 6 hammers turning out smaller shreds with high feeding speed, grilling device on discharge outlet turning shreds and leaves into mulches.
• EFCUT C30 Wood Chipper Shredder can easily chip, shred and mulch 3 inch MAX branches/limbs with leaves at a high waste reduction ratio up to 20:1
• EFCUT C30 Wood Chipper has a powerful recoil starting gasoline engine of 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Engine, Fuel w/87+ unleaded gasoline (maximum 10% ETHANOL gasoline can be used as well), 0.7 gallons Max capacity
• EFCUT C30 Wood Chipper Shredder has two unique designed check windows, the front one for faster replacement of blades and the back one for easier clearing blockage of debris, making your gardening work more efficient.
• EFCUT C30 Wood Chipper Shredder can be used for Forestry, Gardens, Landscaping or yard waste recycling to chip tree branches/limbs, and shred brush as a Craftsman Limb Shredder.

Product features

EFCUT Honored Product

• Innovation orientated for ever.
• Superb quality backed by desigh and technology.
• 100% Satisfication of Service.
• Always work for excellence!

Highlights of C30 Wood Chipper Shredder

• Bigger diameter of cutting rotor makes shredding big woods fast and easy.
• Unique 2 check windows to remove blocked debris.
• Total 6 hammers lead to high reduction ratio and smaller shreds.
• Wide and deep hopper makes feeding woods/twigs with leaves quite easy.
• Bigger assembled size but less net weight.

20:1 Waste Reduction Ratio

EFCUT C30 wood chipper shredder turns out nutrient-rich mulches rather than chips or shreds.

Unique designed check windows of EFCUT C30 Wood Chipper Shredder

• Front check window to quickly replace blades, quick and convenient.
• Back check window to remoe blockage debris, save your labor time.

Unique Cutting System

EFCUT C30 wood chipper shredder has a unique designed cutting system consists of 2 blades made of high-speed steel, and 6 cutting hammers, which chips branches with leaves at a higher feeding speed, more woods and less time.

Compact Design

EFCUT C30 wood chipper shredder is only 114 LBS, quite easy to move around your garden.

Product description

This Wood Chipper Shredder design comes with a EXTRA Large Hopper for MAX volume Chipping/Shredding up to 3" MAX branches/limbs to mulch all wood to a reduction ratio of 15:1 with an elongated top adjustable discharge chute. The ability to hook up your Chipper to your own personal ATV, lawn mower/small tractor, allows for easy transportation on your land to where you need it, w/ the purchase of a Tow Bar Kit (SOLD SEPARATELY).

Our Wood Chipper Shredder comes has a powerful recoil starting Rato 7 HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handling up to 3" diameter wood without a problem. Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), Max capacity of 0.7 gallons.

The engine is designed to ensure the operator's safety. Always operate machine according to directions in the user manual, always wear the appropriate hand & eye protection (ENGINE OIL NOT INCLUDED). This wood chipper comes with a 3-year limited. We have a dedicated customer support team stand behind our chippers, so you can trim your trees with ease knowing that we are always here for you.

• EFFFICIENT PERFORMANCE; This Mini Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1, capable of high volume Chipping/Shredding/Mulching via the Large Extended Feeing Chute for upto 3" MAX branches, limbs and debris
• UNIQUE DESIGN; Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90°-145° degrees
• POWERFUL; This Chippers powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
• SAFETY; Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
• BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), pertrified wood or vines

User questions & answers

Question:	Manual recommends sae 30 oil, but this page recommends 10w-30 - which is correct? average temp here is 50-90 degrees fahrenheit
Answer:	Hi. It can be stretched up to 6.5 feet
Question:	So oil is not included. how much oil is needed
Answer:	Please go to our store front or search for Home4 for the other color. Thanks
Question:	Self feed feature
Answer:	It would not work well on a straight wall. It is shaped like a V and you need to extend all of the points to make the basket that the stuffed animals sit in.
Question:	No ethanol what do you do if you live in california says carb compliant we have ethanol? who's engine is it where made
Answer:	Hi. It's designed in USA and made in China.

Product description

This Wood Chipper Shredder design comes with a EXTRA Large Hopper for MAX volume Chipping/Shredding up to 3" MAX branches/limbs to mulch all wood to a reduction ratio of 15:1 with an elongated top adjustable discharge chute. The ability to hook up your Chipper to your own personal ATV, lawn mower/small tractor, allows for easy transportation on your land to where you need it, w/ the purchase of a Tow Bar Kit (SOLD SEPARATELY).

Our Wood Chipper Shredder comes has a powerful recoil starting Rato 7 HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handling up to 3" diameter wood without a problem. Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), Max capacity of 0.7 gallons.

The engine is designed to ensure the operator's safety. Always operate machine according to directions in the user manual, always wear the appropriate hand & eye protection (ENGINE OIL NOT INCLUDED). This wood chipper comes with a 3-year limited. We have a dedicated customer support team stand behind our chippers, so you can trim your trees with ease knowing that we are always here for you.

• EFFFICIENT PERFORMANCE; This Mini Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1, capable of high volume Chipping/Shredding/Mulching via the Large Extended Feeing Chute for upto 3" MAX branches, limbs and garden debris
• UNIQUE DESIGN; Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90°-145° degrees
• POWERFUL; This Chippers powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
• SAFETY; Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
• BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines

User questions & answers

Question:	where can we get replacement blades for this chipper
Answer:	No. Won't even shred branches over 1 inch.
Question:	I am thinking of using this to chop hay from a bale. I need it to be 1-3 inches long. Is this possible or will it be turned into too fine of pieces
Answer:	Based on my experience so far, you should be fine if you keep the branches under 2" in diameter. There's only so much a 6HP engine can do. I've fed it dogwood, Maple, and eucalyptus and it only really struggled with the eucalyptus.
Question:	Is there a tow bar for this chipper
Answer:	Not sure mine chokes out on 1 1/2 inch branches.
Question:	How much wood would this wood chipper chip if this wood chipper could chip wood
Answer:	No idea but the one I have runs like a champ. Absolutely no problems with it and I'm totally satisfied.

• EFCUT C30 MINI Wood Chipper Shredder has a 15.6 inch cutting rotor with 2 blades + 4 hammers turning out smaller shreds with high feeding speed, grilling device on discharge outlet turning shreds and leaves into mulches.
• EFCUT C30 MINI Wood Chipper Shredder can easily chip, shred and mulch 3 inch MAX branches/limbs with leaves at a high waste reduction ratio up to 15:1
• EFCUT C30 MINI Wood Chipper has a powerful recoil starting gasoline engine of 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Engine, Fuel w/87+ unleaded gasoline (maximum 10% ETHANOL gasoline can be used as well), 0.7 gallons Max capacity
• EFCUT C30 MINI Wood Chipper Shredder has a unique designed check windows for faster replacement of blades, making your gardening work more efficient.
• EFCUT C30 MINI Wood Chipper Shredder can be used for Forestry, Gardens, Landscaping or yard waste recycling to chip tree branches/limbs, and shred brush as a Craftsman Limb Shredder

User questions & answers

Question:	what's the package dimensions
Answer:	I would use Facebook messenger to contact Great Circle. They are very responsive and will send you a link where you can get replacement blades.
Question:	If there is a problem, can it be returned and how
Answer:	mine came assembled with the exception of the hopper cover, small side shute, handle, wheels and base stand. Pretty easy to put together. took about 45 min.
Question:	Is the product description indicating that the longest branch it can accept is 10” long
Answer:	I tried to write a review about this, and Amazon cancelled it twice! I STRENUOUSLY recommend against buying this until they get their packaging issues sorted out. It does come mostly assembled. You have to install the wheels, handlebar and foot-bar. But in the case of my recent order, it arrived damaged because the packaging is so terribly inadequate. We jumped through a few hoops to return it, and ordered a replacement. It arrived with even more damage! It is shipped in a simple cardboard box with terribly insufficient bands of very thin (1/8th inch) wood stapled together. That arrangement might be JUST enough protection when they are still in original shipment on a pallet. But it is woefully inadequate for the treatment it receives once it's in the 'care' of the final shipper. BEWARE!
Question:	Where is this product made?where is this product made
Answer:	100

Product features

EFCUT C30 MINI 7HP 212cc Wood Chipper Shredder & Mulcher Max 3" Chipping Capacity Reduction Ratio 15:1

EFCUT is not only committed to designing more unique highlights but also focusing on more reliable machine quality.

EFCUT adopts independent product development and self-manufacturing and is the sole owner of the brand.

EFCUT has always kept in mind the design concept of continuous innovation and never stop progress. We always strive for the advanced idea and leading ability. To make a difference is our eternal pursuit.

The ultra-high cost performance of EFCUT can meet your needs perfectly!

High Reduction Ratio Cutting System with 15:1

• 2 blades together with 4 hammers cut wood branches into shreds, grilling device on the discharge outlet continue to turn shreds into mulches.
• In addition to the HSS blades, the structure of the unique hammers makes your branches not only chips but also mulch!

Verified Purchase Buyers Review Sharing：

"The chipper is easily maneuverable and can be pulled into areas with all sorts of ground debris."

" It packs up neatly and can be stored in the garage. It was easy to assemble and easy to move. It handles our small fruit tree limbs without a problem and it provides lots of free mulch to assist us in our natural landscaping."

Unique Check Window for Easy Maintenance

• Whether to replace the blade or check the blockage, it could provide a faster replacement of blades and easier to clean the blockage. And the chipper has a longer average time between failures (MTBF).
• With a quick check window, you can easily clean up obstructed debris and replace blades even with no need to open the cavity cover. Greatly save your time and reduce more tedious steps.

Multi-purpose Counter to Know the Next maintenance

• The counter could be used for regular maintenance of the machine, blade replacement, oil change. Using it to record the chipping hours, which will make you easily know the next time to resharpen the blade or add oil.
• Long press to power on/off. When the engine stops, make the running timer power off, when the chipping time is up to 3hrs, check a sharpening or replacement of blades if in need.

Oil Absence Protection for More Security

The machine will not be able to run when the oil runs out, protect the machine from damage due to less oil. The excellent low oil level sensor allows you to no longer worry about safety.

13 5/8 x 12 1/4 inch hopper

• Wide hopper makes feeding big branches with leaves easy and quick.
• The 3-inch scale sticker can perfectly help you gauge the diameter of branches.
• Thick anti-burst hopper rubber protection device to double your safety factor.

MAIN SPECIFICATIONS

C30 MINI Wood Chipper is powered by Recoil Starting SHINERAY 7 HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine

• Max Power & Speed：4.2 KW / 3600 RPM

• Max Torque : 13.5 N.m / 2500±100 RPM

• Bore x Stroke & Cooling System：70 mm x 55 mm & Forced Air Cooled

• Ignition & Lubricating Type：Induction ignition & Splashing

Light-weight Design only 88.2 LBS

• More portable with 88.2 LBS and easy to move with 39.4-inch height.
• Still of high quality and stable, even lighter than EFCUT C30 Wood Chipper.
• It can be used for the everyday DIY homeowner with land or for 'On-the-Go' landscapers/keepers.

10" all terrain tires

Rugged all-terrain 10x 2 3/4 inch diameter airless rear wheels enhance the ability to move around the garden.

High-Quality Blade Material

Excellent Blade - We adopt a unique HIGH-SPEED steel blade, and with the hammers perfect match, to cover more great rich mulch. Especially the well-chosen blade material after multiple tests makes the resharpening and replacement interval longer, and greatly reducing the probability of the blade tipping and bent.

Product description

This SuperHandy Ultra Heavy Duty Wood Chipper Shredder & Mulcher has a RATO 7 HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine. Includes a top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX small branch/limbs, 3 in 1 Capable Multi-Function, 3 Years Warranty. Fuel this Wood Chipper with 87+ unleaded gasoline (NO ETHANOL recommended) with a max capacity of 0.7 gallons & fill the engine with Oil as recommended in the manual. The Universal Vacuum Kit can be used with GreatCirlceUSA, Landworks & SuperHandy Wood Chippers (with the correct adapter piece depending on the model). The Universal Tow Bar Kit can be used with various Wood Chipper brands like: GreatCircleUSA, Landworks, SuperHandy, Harbor Freight, Tazz & Earthquake Wood Chippers Shredders (WOOD CHIPPER NOT INCLUDED)

• MULTI-FUNCTION CAPABILITY; This 3-in-1 Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1 when using the top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX branch/limbs, or the attachable leaf vacuum for mulching
• UNIQUE DESIGN; The Slanted Housing design reduces jams, unlike other chippers; Hookup your: ATV, lawn mower/small tractor, for easy transportation with a Tow Bar Kit and use the vacuum inlet for easy leaf mulching with a Vacuum Kit (BOTH SOLD SEPARATELY)
• POWERFUL; This Chippers powerful recoil starting 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
• SAFETY; Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
• BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines

User questions & answers

Question:	do you gave a gas one with electric start
Answer:	I bought extra ones to have when purchased.
Question:	Does the machine come with covers for the main hopper and chipper chute to max. suction when using the vacuum attachment
Answer:	I don't think this is what you want. The feeder "hole" is only 3" and would likely clog up. Additionally, I believe this will turn the hay into to fine of pieces when all said and done.
Question:	Will this chop garden waste like tomato plants and corn stalks
Answer:	No
Question:	Where is it made at
Answer:	This wood chipper could chip all the wood it could chip if this wood chipper could chip wood! 👍😉