7 best pump kits for pressure washers

• QUALITY THAT LASTS - 2800-3000 PSI and 2.5 GPM which is great for any and all small house cleaning projects. Very safe pressure even for washing your car or other things without being afraid to damage the paint!
• EASY START - Horizontal Pump Fits Most 3/4" Shaft Power Washer Horizontal Engines (Best results 196cc - 212cc) With Our Pump You Can Get More Out Of Your Pressure Washer!
• BETTER THAN OEM - Fits 3/4" Shaft Horizontal Pumps - High Quality Replacement Pump For Your Pump. These Are OEM Replacement Pumps For Many Models of Pressure Washers. If Your Old One Stopped Working, Is Corroded etc. Don’t Hesitate!
• DOES IT MATCH YOUR MACHINE? - Our Pump Comes Standard With A 3/4 Inch Shaft Which Is Most Common For Small Horizontal Pressure Washers. (5 HP to 8 HP) - Shaft Depth: 2 5/8" - Hole Distance to hole - 2 5/8" Keyway Size: 3/16" - DOES NOT FIT 7/8" Vertical/Bottom Shaft Pumps.
• PARTS COMPATIBILITY - Homelite: 308418007, 309515003, 308418004, 308653078, 308653093, 308653057, UT80522B, UT80953B, UT80522A, UT80953A. ✔ Karcher: G3050OH, K2400HH, G2400HH. PowerStroke: PS80522, PS80903B, PS80903A. ✔ Generac: 308418007, 01675, 01675-0. ✔ Troy-Bilt: 020242-02, 020242-04, 020241, 020241-1, 20242. ✔ Simpson: MSH3125, MSH3125-S. ✔Honda: GC190, GC135, GX140, (GC160w/ 3/4 Inch Shaft) - Message Us To See If Yours Fits!

User questions & answers

Question:	Will this pump match up to the Craftsman
Answer:	Yes but verify the shaft is 3/4 inch diameter and has a 3/16 slott for lock key and the 4 x 2 1/2 inch on center mounting holes pattern for your motor.
Question:	Will this pump fits honda gc
Answer:	Yes! As long as your Honda G160 has the standard 3/4" shaft and 4 mounting bolts (in a square).
Question:	When will my order arrive? I ordered it almost 3 weeks ago and it still hasn’t arrived? Please advise
Answer:	its lost in transit or out of stock .....get a refund or claim or another replacement
Question:	if this does not fit my craftsman model580.767303 PW can i send it back? my engine shaft is 3/4" with a 3/16 groove for keyway and hole patter
Answer:	First yes you can send it back IF ---, not this is the right thing 100% YES IF you use the Amazon program. Amazon is the very best for customer service. Second - it will fit. There may be a slight difference in the distance from the pump to your engine -- but if it fails to fit and the shaft is too long - judge the distance and put the appropriately sized washers on it. If all else fails you have up to 30 days to return it. I pay a little extra for Amazon because even if the seller takes off - Amazon makes it right - every time now for years

Product features

Horizontal Engines with 3/4" Shafts ONLY

1. FITMENT - This pump comes with a standard 3/4” shaft which is most common for all small Horizontal pressure washers.
2. Shaft Depth: 2 5/8"
3. Hole Distance to hole - 2 9/16”
4. Keyway Size: 3/16"

PEGGAS Pump Measurements

• Height: 7 1/2" (Inches) tall
• Width: 5 5/16" (Inches) wide

PEGGAS Pump Measurements

• Length: 8" (Inches) Length

PEGGAS PW28/2.5 Technical Specifications Sheet!

Fits many models:

• Homelite 308653057, 308418007, UT80522, UT80953, UT80522B, UT80953B, UT80522A, UT80953A, UT80522D, UT80522E, HL252300 - Powerstroke 30841800, PS80522, PS80903A, PS80903B - Delta DXPW3025 - Karcher MH5500H-1 M5500H-2 M5500H-3 , Karcher G3050OH - Generac 308418007 HL252300, Generac 01675, 01675-0, 1675, 1675-0, G24H - Troy-Bilt 020241, 020242, 020241-0 - Comet BXD2528, BXD2527G - Craftsman 580.752600 580.752601 - Generac AXD2524GT-22MM, AXD3025G - Simpson MSH3125, MSH3125-S - Annovi Reverberri SJV25G27D-F7-EZ, AR MV25G30D - OEM Technologies FNA520002 (SIMPSON 520002) - AR North America RMV25G30D-PKG, RMV25G30-EZ-PKG
• Engines: OEM Himore 309515003 Engines, Honda GC160 Type P, Honda GC190
• AND many other models.

(Does Not Fit Excell engine's w/ 7/8" shaft )

1. THIS PUMP IS EXCLUSIVELY FOR HORIZONTAL ENGINES WITH A 3/4" SHAFT
2. Shaft Diameter: 3/4" Keyed Hollow Shaft

• THIS PUMP WILL ONLY FIT A HORIZONTAL ENGINE w/ 3/4 Shafts, NOT A 7/8 SHAFT & NOT VERTICAL ENGINES. Models stated in the listing are potential matches only and NOT a 100% confirmation of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)*** Fits Honda Excell units with 3/4 shaft only!!! Some Excell units have the 7/8 shaft and this pump will not work!**

Learn More About The PEGGAS Horizontal Pump With Our Diagram!

• FITMENT - This pump comes with a standard 3/4” shaft which is most common for all small Horizontal pressure washers.
• Discharge Ports : 22mm Twist Connect (High-Pressure Hose)
• Inlet Ports (Garden Hose): 3/4" Garden Hose Thread
• Comes with Built-In Unloader
• Built-In Chemical Injector
• Comes with a FREE Thermal Relief Valve

3/4 Inch Horizontal Shaft!

• PUMP SPECIFICATIONS:
• Type: Axial
• Head Material: Aluminum
• Engine HP required: 5.5 HP (Minimum)
• Max. Water Supply Temperature: 104°F
• Self-suction: Yes
• Pre-Oiled Ready to go!

3/4" Inch Horizontal Shaft Pump Mounted!

• When installing, please ensure that the keyway is installed before running your pressure washer.
• Allow water to flow freely through the pump until all air is out of the lines before firing the pressure washer up!

3/4 Inch Horizontal shaft pump in ACTION!

1. Max. Volume: 2.5 GPM Max.
2. Pressure Output : 3000 PSI Max.
3. Pump Speed: 3450 RPM

• Allows for a large area of coverage and with all that cleaning power, Blast away all Dirt, Grime, away forever!

PEGGAS

Product description

Whether you’re looking for a replacement part or an accessory to enhance your cleaning experience, SIMPSON has the right one for you! Our accessories provide more cleaning options for the homeowner and professional to get the job done effectively while efficiently. Our accessories are designed to fit most gas pressure washers.

• PowerBoost Technology delivers higher pressure at the nozzle
• Fully adjustable unloader system with ergonomic control
• Thermal relief protection to prevent the pump overheating
• Dual oversized radial ball bearings are installed for better wear, friction resistance and precision polished stainless steel pistons for extended seal life
• Crankcase manufactured from fully anodized die cast aluminum for protection against corrosion sealed to prevent contamination along with lube failure

User questions & answers

Question:	Hi, will this bolt up to a 16hp vanguard
Answer:	It's a rechargeable battery. I think the battery is 4.8 and the charger is 7.2v. It's simple to recharge. I don't know how to upload photos in the comments section.
Question:	Will this pull water from a tank
Answer:	Yes
Question:	I have a 13 hp Honda with 4000 psi 3.8gpm cat pump...will this pump mount with same bolt pattern
Answer:	Medium grit on the brown grinding inserts. This is all we use in this kit as we have no need for the other items.
Question:	Que medida es el eje o el chaf
Answer:	A 3/8 inch or one centimeter open end wrench.

• 💦【Universal Vertical Power Washer Pump】Replacement Power Washer Pump, MAX 3000 PSI / 2.4 GPM / @3400 RPM, top performance at 2800-3000 PSI and fit most 180 ~ 196cc. ※NOTE: This pump only fit VERTICAL 7/8'' SHAFT Small Gas Engine.
• 💦【High Quality】This Univeral Replacement Pump based on OEM, direct drive Vertical axial pump fits most 7/8" shaft power washer Vertical engine at 6.5 ~ 7hp (180 ~ 196cc). Provide with highly stable and powerful performance and renew your power washer, and upgarde 30% running time than normal for years washing job.
• 💦 【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no need to release pressure before starting engine.
• 💦【Mounting & Dimension】Equipped with industry standard 7/8" shaft, comes with generic 22mm x 14mm hose connections, also provide with flange bolts, soap hose and keys. ►From main center shaft to each mounting bolt is 4 inches; ►From center to center spacing between mounting bolts is 7 and 11/16 inches, 6 and 3/16 inches, 6 and 7/16 inches. ※PLEASE NOTE: Only fit 7/8" shaft Vertical pressure washer pumps.
• 💦【COMPATIBILITY 】►Homelite: 308653052, 308653006, 308653008, 308653093 UT80709, UT80911, UT80835, UT80933, UT80993, UT80993A, UT80911A. ►Husky: HU80709, HU80911, HU80709A, HU80911A, HU80714, HU80915. ►Ryobi: RY80930, RY803000, RY802900, RY802800, RY802723. ►PowerStroke: PS262311, PS80944, PS80946. ►Craftsman: 580.7529, 580.768, 580.75205, 580752050, 580761650. ►Excell: VR2522, VR2500. ►Generac: 1050, 1050-0, 1802.

Product features

YAMATIC Premium Vertical 7/8" Shaft Pressure Washer Pump

Direct drive vertical axial pump fits vertical 7/8" shaft power washer, and most vertical engine at 6.5 ~ 7 hp (180 ~ 196cc).

NOTE: As this pump won't necessarily fit every model, Please do check the Installation dimensions.

Compatible with [7/8" Vertical Shaft pressure washer pumps]

• Homelite: 308653052, 308653006, 308653093, 308653078, 308653008, 308653036, 308653035, 308653026, 308653058, 308653005, 308653003, 308653045, 308653025, 308653045, UT80709, UT80911, UT80835, UT80933, UT80993, UT80993A, UT80911A, UT80709A, AUT80993, BUT80993, DWF80710, WF80911, UT80993E (Need 3 washers for per bolt), UT80993F, HL80833, HL80835, HLCA80710
• Husky: HU80709, HU80911, HU80709A, HU80911A, HU80714, HU80915, HU80715, HU80722, HU80722A, HU80833, HU80833A, HUCA80709A
• Ryobi: RY80930, RY803000, RY802900, RY802800, RY802723, RY8C2700, RY802700A
• PowerStroke: PS262311, PS80944, PS80946, PS80979, PS80979
• Craftsman: 580.7529, 580.768, 580.75205, 580752050, 580761650, 580761651, 580.752191, 580.752700, 580.75271
• Briggs & Stratton: 311553gs, 020441-0, 020442-0, 020288, 020289
• Excell: A07908, VR2522, VR2500, EX2RB2321, EXVRB2321
• Generac: 1050, 1050-0, 1802
• Brute: 020290-0, 020290-1 -2, 020301-0, 020338-0
• Devilbiss: DT2200P, DT1600E, WVR2320-WK, WVRH2421
• Water Driver: WGV2424-1, WGV2424-3
• Monsoon: MVR2250, WVR2020

NOTE: As this pump won't necessarily fit every model, Please do check the Installation dimensions or confirm with us.

Features

• ✔Easy Start - Built-in for simple & quick cold starts to make the startup a breeze.
• ✔100 hours Running Time - 50 hours longer service life than other pumps!
• ✔OEM Pump - For engine from 6.5~7hp (180~196cc), it could work at a wide range from 2800 to 3000 PSI.

Package Includes:

• 1 x Pump
• 1 x Chemical injector hose
• 3 x Flange bolts
• 2 x Keys
• 1 x User manual

Product description

PARTS COMPATIBILITY:

Specific models stated in the listing are potential matches only and NOT a guarantee of compatibility.

(Even if two pieces of equipment share the same year/make/model, they can and often do have different part numbers).

The only way to ensure the correct replacement is with the OEM part number. The customer is responsible for verifying their OEM part number.

It is the customers responsibility to make sure that this is the correct item/part for their unit. If you are unsure if this is the correct item/part, please contact The ROP Shop, we would be more than happy to help you.

• New 2600 psi PRESSURE WASHER WATER PUMP KIT
• Fits Honda EXCELL XR2500 XR2600 XC2600 EXHA2425 XR2625
• 2400-2600 PSI  /  2.3-2.4 GPM
• Garden hose hookup w/ 3/8" Female Quick Connect
• Fits 7/8" Short Shaft Engines 1-1/2" or less

User questions & answers

Question:	Rx2600- honda 5.0hp. d28745-477206 looks to have a 5/8 shaft. will this fit
Answer:	Don’t know just ordered pump. Pump works fine
Question:	Will this fit my devil bliss 2221scvh? Honda 4.5 motor
Answer:	Check the product spec sheet
Question:	Is a repair kit available for this pump
Answer:	Yes, this pump work on rmv25g30-ez.
Question:	Is there a warranty
Answer:	Yes, it fit Generac model 0065960.

Product description

Genuine replacement seal kit used on select pressure washer pumps.

• Pump seal set for pressure washers
• Genuine briggs and stratton part
• Set of 3 seals

User questions & answers

Question:	I went to change the oil and the oil for the pump was silver/grey. It sounds like it is getting water in the oil. Would this be the correct seals
Answer:	Yes,,they are pretty soft... I wouldn't use them on any nice paint job though...there will be microscratches , just like any brush use. Id use it for decals, or windows, metal, plastics
Question:	Will this work on a generac 01293-1 type 7290cp? The number on the pump is TP
Answer:	When I go to the link for this Amazon product (Ford FPWEF2.1-1800 1800PSI), The page shows the electric pressure washer. However, on the page you can scroll across and see the gasoline power washers. The same reviews and questions are shown for both. They are both Ford. I have to say, I have had an electric power washer and never again!. My wife bought me a gas power washer which has a lot more power. It is so much quicker or does the same area a lot quicker than an electric power washer. Let me say though; you have to add the gasoline preservative in the gas can before adding gasoline to it or the carborator will gum up and not be usable after about 12 months.
Question:	Will this fit the 0510260442 pump
Answer:	Actually, there IS a good answer to this one. Firstly, there are times that you may wish to turn down the pump pressure, such as when you are cleaning out your gutters and your gutter sprayer attachment flies out of control from the gutter due to too high a pressure. The company that makes the pump, model # RMV 2.5G30 , mfg. by Annovi Reverberi, has a handle insert that would be placed below the lock nut of the exposed "unloader" valve. The part number is 2760480. The AR phone number is 763-398-2008. ALSO ASK FOR THEM TO EMAIL YOU A PARTS MANUAL. You must be VERY careful when installing this handle because you have no way to stop it from turning too far when you back off on the pressure...you could have a water mess, you possibly could ruin your pump or get hurt from the escaping water. ALSO, if you install the handle too low, it will bind and not allow you to adjust the pressure. So unless you are partially mechanically inclined, do not attempt this. This also will likely void your manufacturer's warranty. Good luck....(I have to give myself a pat on the back as I had to do quite some research to find an answer to this one!!!...hopefully this will help those folks that want to have a more fully functioning pressure washer)
Question:	will this fit my Troy Bilt
Answer:	Thank you for contacting us! This item comes with a one year warranty against manufacture defects. We warranty in house so you would only need to contact us directly in order to us to get you taken care of. Please let me know if there is anything else that I can help you with today. Thank you for your interest!

Product features

Why Briggs & Stratton Genuine Parts?

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations.

Product description

Whether you’re looking for a replacement part or an accessory to enhance your cleaning experience, SIMPSON has the right one for you! Our accessories provide more cleaning options for the homeowner and professional to get the job done effectively while efficiently. Our accessories are designed to fit most gas pressure washers.

• Threaded M22 male connection
• Double seal system prevents water leaks
• Thermal relief protection to prevent the pump overheating
• Maintenance-free crankcase manufactured from fully anodized die cast aluminum for protection against corrosion sealed to prevent contamination along with lube failure
• Gas engine flange fits most engines

User questions & answers

Question:	Will this fit my troy bilt 020316 3,000 psi 2.7 gpm has briggs and stratton engine. pump is underneath. has 4 mounting screws that mount to engine
Answer:	Yes, they will. I have the Harmony model, and these filters fit perfectly.
Question:	Is this pump interchangable with Part
Answer:	Length – 6.40” Width – 4.30” Height – 1.00”
Question:	which pump will fit on my Craftsman model 580 752 700 6.75 hp briggs engine
Answer:	The bowl is 1 1/2" deep, 5" across and a 16" circumference.
Question:	i have a part number 510003 , is this the same as your
Answer:	I don't think that there would be a problem with microwaving this bowl! I think it would be fine :)
Question:	Is this the right pump for my Brute 3100 psi power washer
Answer:	As far as I know.
Question:	Will this fit 3000psi craftsman cmxgwas020734-00 with axial cam pump
Answer:	The inside depth is 1 1/4 inches and it's 4 inches wide. Too cute, love it!
Question:	Will this fit a craftsman 2200 psi 1.9 gpm
Answer:	In very small print "responsibly made in China"
Question:	Will this fit model 020486 Troy bilt pressure washer
Answer:	This is microwave and dishwasher safe.
Question:	will this fit Devilbiss 2227cwb
Answer:	Not that I’ve found. My dog is missing most of his teeth, yet still seems able to move the food around enough to eat it.
Question:	Would this fit my generac 01292-2 . Its 2.9 gpm and 2300 psi
Answer:	China. We made to wash it thoroughly because there seemed to be some film on it from the factory (not because it was from China, just as a general precaution from any factory).
Question:	Will it fit a generac model
Answer:	I have a puppy. She figured out right away how to use it, but the design forces her to slow down and not gulp her food.
Question:	how many psi
Answer:	The solution for that problem it’s Cook tge fries yourself every time that you want to eat fries, what people purchase of the fast food franchise is not fries potato’s.

Product features

RMV25G30

Annovi Reverberi RMV25G30 horizontal plunger pump. 2.5 GPM at 3,000 PSI, spins at 3,400 RPM with 3/4" shaft and designed for gasoline engines. Comes with easy start valve (EZ).

What is EZ

EZ equals “easy engine start”. The easy start was designed for easy of engine start with the benefit of safety conditions starting a pressure washer. With an EZ installed on the pump the user will not have to hold open the trigger gun to relieve the pressure when starting an engine.

EZ is a value inside the pump that automatically / mechanically relieves the built-up pump pressure when the engine is being pulled started. This built up pressure is coming from the engine turning over the pumps cylinders that are compressing and trapping this compressed water inside the manifold of the pump. Eventually; without relieving this pressure from the pump the engine would be impossible to pull or turn over.

Product description

Brand new replacement for all 2 piston radial bow tie strap pumps that are mounted on horizontal engines. Easy installation and ready to use with oil, quick coupler and thermal relief valve already installed

• New PRESSURE WASHER PUMP fits Honda Excell XC2600 XR2500 XR2600 XC2600 EXHA2425 XR2625
• Fits the 7/8" shaft diameter, Only Honda Short Shaft Horizontal Engines for Excell,
• Quick connect adaptor included - connect quickly to high pressure hose
• Includes hardware kit ( Bolts, Lockwashers, Spacers Shaft Key) and Instructions
• Garden hose hookup / Thermal valve/ Chemical injector included

User questions & answers

Question:	What’s the red knob/part of the pump called
Answer:	It should fit. I put mine on a five horsepower Honda GX160. I have to assume that yours is probably the same engine. It's the one that goes onto Pressure washers.
Question:	Will this pump fit on a XR2500 with Honda engine
Answer:	No ! Not the right pump, will not fit. You need the https://www.amazon.com/dp/B00N6RVQZ2 Be sure to purchase from Pumps-n-more. We are currently sending all new mounting hardware, shaft key. thermal relief valve , quick disconnect and a set of wand tips. We also have a call number available 7 days a week for support if needed. thanks tony 727-858-1721
Question:	Will this fit my honda 5.0 / excell, model exh2425 2400psi, 3/4 shatf
Answer:	Yes this will replace that odd bowtie strap pump that has the plastic cover. This is a special model that has the sight glass drain plug and a sturdier mounting flange. Be sure to purchase from Pumps-n-more to be sure you are getting this model with new mounting hardware abd quick disconnect socket for your high pressure hose. thanks tony 727-858-1585
Question:	is this direct replacement for EXHA 2425 pressure washer
Answer:	This one you clicked on will not fit vertical engines. We only have the 3 post pumps for vertical engines. be sure to buy the one that has the hoses connecting on the same side as your current pump. These pumps have specific directions. They come with kit to mount on vertical engines. thanks tony