12 best watts washer hoses
Watts washer hoses, often referred to as pressure washer hoses, are essential accessories used with pressure washers for various outdoor cleaning tasks.These hoses play a crucial role in delivering water under high pressure to effectively remove dirt, grime, and debris from surfaces. Here's some information about Watts washer hoses:
Purpose: Watts washer hoses are designed to connect the pressure washer to a water source and the spray gun or wand. They enable the flow of water from the pressure washer to the nozzle at the end of the wand, where it's expelled at high pressure for cleaning purposes.
Materials: Pressure washer hoses are typically constructed from durable materials to withstand the high-pressure water flow. Common materials include rubber, PVC (polyvinyl chloride), or a combination of both. The hoses are reinforced with layers of braided or spiral wire to add strength and flexibility.
Length and Diameter: Watts washer hoses come in various lengths and diameters. The length of the hose determines how far you can move away from the pressure washer unit while cleaning, while the diameter affects the water flow rate and pressure. A wider diameter typically allows for higher water flow and pressure.
Pressure Rating: Pressure washer hoses are rated for specific pressure levels, typically measured in pounds per square inch (PSI). It's crucial to choose a hose with a pressure rating that matches or exceeds the maximum PSI rating of your pressure washer to ensure safe and efficient operation.
Quick-Connect Fittings: Many pressure washer hoses come with quick-connect fittings that make it easy to attach and detach the hose from the pressure washer and spray gun. These fittings provide a secure and leak-free connection.
Compatibility: When purchasing Watts washer hoses, make sure they are compatible with your specific pressure washer model. Some pressure washers may have unique fittings or requirements.
Replacement: Over time, pressure washer hoses may wear out, become damaged, or develop leaks. It's essential to regularly inspect your hose for signs of wear and replace it if necessary to maintain the efficiency and safety of your pressure washer.
Storage: Properly store your pressure washer hose to prevent kinks, tangles, and damage. Coiling the hose neatly and protecting it from UV exposure and extreme temperatures can prolong its lifespan.
Safety: When using a pressure washer, always follow safety guidelines, including wearing appropriate safety gear, such as goggles and gloves. Be cautious of the high-pressure water stream, which can cause injury or damage if directed at people or delicate surfaces.
Watts washer hoses are critical accessories for pressure washer users, ensuring that the high-pressure water is delivered safely and effectively for a wide range of outdoor cleaning tasks, such as cleaning driveways, decks, siding, and more. Choosing the right hose and maintaining it properly is essential for the longevity and performance of your pressure washer.
Below you can find our editor's choice of the best watts washer hoses on the marketProduct description
Equipped with garden hose fittings to install outside of RV/Boat to water supply hose. GAC Filter included with housing, bracket and wrench. Cartridge reduces chlorine, sediment, unpleasant taste and odors. Flow rate 2.5 -GPM.
- Easy garden hose fittings, perfect for campers and RV's
- High grade GAC Filter included
- reduces chlorine, bad tastes and odors
- 2.5 GPM flow
- Meets all plumbing codes
User questions & answers
Question: | Will this help prevent water spots on black cars |
Answer: | Yes it will, very easy to change out |
Question: | could you use this to filter sediment going in to a washer |
Answer: | No, it will not. |
Question: | We are trying to fill a 15'X 4' pool. will this help keep the rust particles out while filling? and how many gallons is this good for |
Answer: | yes |
Question: | will it remove salt that is from our whole house softner. I need it for my garden |
Answer: | Yes it will |
Product description
DISHWASHER HOSE3/8 in. O.D. x 3/8 in. O.D. x 72 in. Stainless-Steel SureDry Dishwasher Connector
-
Part Number: 496-203EF
Item Weight: 1.09 pounds
Item Weight: 1.09 pounds
Package Dimensions: 10 x 8.3 x 2.2 inches
Batteries Included?: No
Batteries Required?: No
Product description
Strong utility hose, designed with polyvinyl chloride compounds reinforced with polyester braiding. Braiding offers better fitting retention and less chance of blow off than non-braided styles. Highest quality construction insures longer life. Designed for use as washing machine or dishwasher inlet and drain hose. 75 to 200 PSI pressure range. -40? F brittle point. +185? F maximum operation temperature. Black. 1" outside diameter. Length: 12. Width: 12. Height: 12
- Strong utility hose, designed with polyvinyl chloride compounds reinforced with polyester braiding
- Braiding offers better fitting retention and less chance of blow off than non-braided styles
- Highest quality construction insures longer life
- Designed for use as washing machine or dishwasher inlet and drain hose
- 75 to 200 PSI pressure range
Product description
ProLine 7/8 ID 1-1/4 OD PVC 12 in. L Discharge Hose
- Strong utility hose, designed with polyvinyl chloride compounds reinforced with polyester braiding
- Braiding offers better fitting retention and less chance of blow off than non-braided styles
- Highest quality construction insures longer life
- Designed for use as washing machine or dishwasher inlet and drain hose
- 75 to 200 PSI pressure range
Product description
Watts RWNK 1" Washing Machine and Dishwasher Hose, Black (50 Feet)Watts RWNK 1" Washing Machine and Dishwasher Hose, Black (50 Feet) Features: Braiding offers better fitting retention and less chance of blow off than non-braided styles Highest quality construction insures longer life Designed for use as washing machine or dishwasher inlet and drain hose 75 to 200 PSI pressure range -40º F brittle point +185º F maximum operation temperature 1" outside diameter 5/8" inside diameter
- Watts
- RWNK
- Tubing
- Black
Product description
This Watts braided stainless steel dishwasher connector kit comes complete with stainless steel 3/8-Inch compression connector and new dishwasher hose fitting that can be easily hand-tightened to accommodate the new hose-threaded style of inlet valve found on current dishwasher units. This new hose threaded elbow makes installation a breeze for anyone.
- Universal dishwasher connector kit stainless connector Comp by Comp 60-Inch
- Kit Includes 60-Inch braided stainless connector, 3/8-Inchcomp by 3/4-InchFGH brass elbow, and 3/8-Inchcomp by 3/8-InchMIP brass elbow
- Universal kit also includes 2 chrome plated adapters, 3/8-Inch C by 1/2-Inch C, and 3/8-InchC by 1/2-Inch MIP
- Easy installation ideal for non-professional
- Installers save time and effort with improved quality
User questions & answers
Question: | Here comes a stupid question... This is what I need to convert my portable dishwasher to a built in right |
Answer: | No, this is just a filtration filter, if your water is soft this will help with filtering out sedement, if your water is hard like most of central California you'll need a special filter that filters out calcium and maybe a softener also check Amazon eBay they have them, I use this filter as a pre filter for my 5 th wheel and then the camco blue filter to filter all of my water use in the trailer. |
Question: | I have a 1/2 compresion feed line. Will this work |
Answer: | Yes, you can buy filters that are rated- taste,odor,sediment |
Question: | What is the constant working pressure rating of this hose? Also what is the burst pressure |
Answer: | Yes it wil and one filter is for about 1500 gallon |
Question: | Would this work for a portable dishwasher |
Answer: | No these units will not remove salt.Thanks |
Product features
Watts D48U Universal Dishwasher Kit with 3/4-Inch FGH EL Stainless Steel 48-Inch
The Watts braided stainless steel dishwasher connector kit comes complete with stainless steel 3/4-Inch compression connector and new dishwasher hose fitting that can be easily hand-tightened to accommodate the new hose-threaded style of inlet valve found on current dishwasher units. This new hose threaded elbow makes installation a breeze for anyone.
Product description
'Mini Water Hammer Arrestor, Body Material Low-Lead Copper, Connection Type Hose, Pipe Size 3/4 In., Factory Set Pressure 60 psi, Overall Height 6-3/8 In., Diameter 2 In., Max. Pressure 150 psi, Temp. Range 33 Degrees to 180 Degrees F, Standards IAPMO Listed'
Product description
Washing Machine Valve and Wall Box, Water Shutoff, Pipe Size 1/2 In. Inlet, 3/4 In. Outlet, Sweat Inlet, MNPT Outlet Connection, Max. Pressure 150 psi, Max. Temp. 180 Degrees F, Body Material Polysulfone, Standards UL, ATNZ.E164904, ATNZ7.E164904 Listed
From the Manufacturer:
This IntelliFlow (TM) automatic washing machine shutoff valve with leak sensor is used in residential applications to protect against catastrophic water damage from a burst inlet hose connected to a washing machine in use or unattended. It senses when the washing machine is on or off and then opens or closes the hot and cold inlet valves as needed to allow or prevent water from flowing to the washer. If it detects a leak, current flow to both the hot and cold water valves are immediately interrupted and closed. This device consists of an electrical three-prong outlet to receive a washing machine power cable, leak sensor, power cord, and a replaceable internal strainer screen. It also comes equipped with 1/2 inch sweat inlet adapters for both hot and cold water supply tubing and two mounting tabs used to secure the valve to the wall for surface mount applications. The maximum pressure is 150 psi (10.3 bar).
From the Manufacturer
The Watts IntelliFlow Automatic Machine Shutoff Valve is equipped with a state-of-the-art electric current sensing device. When the washing machine is turned on, the device senses current flow to the washing machine. This causes it to actuate its solenoid water valves, allowing water to flow to the washing machine. When the washing machine shuts off upon completion of the full wash cycle, the device senses the lack of current and closes the water valves. The IntelliFlow remains closed until the next time you turn the washer on. The leak sensor provides additional protection from water damage while the washing machine is in operation. Water detected at the sensor results in immediate shut off of water flow to the washing machine hose. By installing an IntelliFlow, you are protecting your home from potential major water damage from a burst or leaking washing machine inlet hose.
- WATTS WASHER WATER SHUTOFF VALVES: Protects against potential residential water damage due to a burst inlet hose connected to a washing machine - whether in use or unattended.
- AUTOMATIC WATER SHUTOFF VALVE: Automatic water leak shutoff valve A2C-M is equipped with a state of the art electric current sensing device. When the washer is turned on, the device senses the current flow to the washer and opens the valves.
- EASY TO INSTALL: It is easy to install and has silent reliable operation.
- BEST SELLING WASHING MACHINE WATER SHUTOFF VALVE: It consists of an electrical three-prong outlet to receive a washing machine power cable, leak sensor, a power cord, and a replaceable internal strainer screen.
- WASHING MACHINE HOT WATER SHUTOFF VALVE WITH LEAK SENSOR: If the Series A2C detects a leak, current flow to both the hot and cold water valves are immediately interrupted and closed.
User questions & answers
Question: | My water supply lines come down from above, not from below. Can I just flip the unit over and have it still function properly |
Answer: | I found the instruction manual. It specifically shows in the installation diagram that the water supply lines are below the box with a note "install upright". So no, you cannot flip the unit over and install upside down (and have it still function properly). |
Question: | Water does not get supplied to the washing machine unless I flip the breaker off and on first. What is wrong with it |
Answer: | There is a procedure for synchronizing the unit with the washer (it should be in the instructions), you may have to do this several time for several weeks before it works properly. Also try doing a cold water only wash, this seems to cause less errors than a warm wash. Good luck, it really is a badly designed product. |
Question: | Which model is this? The wall box mount or surface mount |
Answer: | This is a surface mount without the box. If you want to install it in a existing box you may have to remove the mounting holes at the top. |
Question: | How do you replace screens |
Answer: | This unit does not include screens. |
Product features
A burst washing machine hose can discharge 500 gallons of water in one hour
Protect your investment with the Intelliflow:
How it works:
The Watts Intelliflow Automatic Washing Machine Shutoff Valve uses a state-of-the-art electronic control device that senses the washing machine current flow. When the washing machine is turned on, the controls detect the current flow to the washer, opening both hot and cold water inlet valves to allow water to flow to the washing machine. When the washing machine completes the full cycle the device senses the lack of current and closes the water inlet valves. These valves remain closed until the machine is used again. The Intelliflow's automatic operation and floor mounted leak sensor protect against catastrophic water damage should a washing machine inlet hose burst while the machine is in use.
Product description
Watts Brass & Tubular Washing Machine Water Hot Water Shut Off Valve
- WATER SHUT OFF VALVE FOR WASHING MACHINE: These manual washing machine water shutoff valves are used in washing machine applications to manually control water flow and pressure from the hot and cold-water supply piping to the flexible hoses feeding a washing machine.
- WASHING MACHINE HOT WATER SHUTOFF VALVE: It prevents the washing machine hoses from bursting preventing water damage in the home. Inlet adapter fittings allow either 1/2" threaded or 1/2" solder copper x 3/4" washing machine hose threads on hot & cold-water outlets.
- SINGLE LEVER CONTROL SHUT OFF VALVE: Its manual, single control lever controls both hot and cold water simultaneously, shuts off water protecting machine parts and water supply hoses.
- INSTALLATION: It can be installed in a more convenient spot than old boiler drain type hot and cold-water shutoffs which are often installed in hard to reach places.
- BALL-TYPE DESIGNED VALVE: The ball-type design allows it to be opened to any position to throttle water flow and minimize harmful water hammer and banging pipes caused by fast closing washing machine solenoid valves.
User questions & answers
Question: | The first picture shows the water inlets at 90 degrees from the outlets. All the other pictures show them 180 degrees. Which is correct |
Answer: | I got one for a washing machine about 2 years ago and the outlets were 90 degrees from the inlet. The first picture shows one male and one female thread with a fitting in it which is what we got. We did not get the one with the compression fittings. Very confusing as to what you would get if ordered today!! |
Question: | Will this retro-fit in to the fittings that were installed for the watts intelliflow automatic shut-off valve |
Answer: | This is a manual shut off valve, so it will not fit into the autoShut off system |
Question: | Are the 2 slotted screws on the top for adjusting water supply from hot and cold |
Answer: | NO !!! The 2 screws are to securities device to existing water lines! They have nothing to do with adjusting to hot and cold...this is for your wash machine to determine, depending on cycle, although one side is for hot the other for cold. My advice to You is that you make sure that you get the correct one and have a licensed plumber install it ! |
Question: | is the 2t-m2 valve the one with 1/2" npt straight or solder fittings |
Answer: | I'm sorry the picture shown is wrong. This is the 2T which features 1/2" combination male thread/female sweat ell. See the accurate picture here: http://ecx.images-amazon.com/images/I/315MZAJXFeL._AA160_.jpg. |
Product features
Manual Shutoff Valve
With a flip of its lever, you can turn the water on or off.
Washing Machine Shutoff Valve
Manually control water flow and pressure from the hot and cold-water supply piping to the flexible hoses feeding a washing machine.
Single Lever Turn Off
Turn off both cold and hot water supplies with the flick-of-the-finger.
Product description
Controls both hot and cold water simultaneously protecting machine parts and hoses from damaging effects of water pressure. 1 fingertip lever ends inconvenience of turning 2 hand type valves. Furnished with 1 2'' copper (5 8'' O.D.) El adapters with ears for surface mounting.
- washing machine valve shut off wash laundry machne
User questions & answers
Question: | What is the measurement from the center screw on the left to the center screw on the right? Thanks |
Answer: | 2.5 inches (center to center) |
Question: | the DP2-M2 is the valve the same as pictured? center to center under the screws and the center to center of the hose fittings are they both 2 3/8 inch |
Answer: | Center-to-center of hose connections is 2 3/8” |
Question: | it looks like installing the screws through the holes would be difficult since the hose connections are in the way. Are they off center or |
Answer: | It's not a problem. The ells with the screw holes can be removed from the valve body by unscrewing the large slotted screws. This also allows the ells to be swiveled 180° so that the valve feeds from the bottom instead of the top. |
Question: | will this work with 1/2 in PVC feed |
Answer: | Yes |
Product description
This Watts stainless steel braided supply line starts with an extruded core of PVC tubing. The core is then over-braided with polyester yarn and another layer of PVC material. The final layer consists of stainless steel braid to form a strong, yet flexible supply line.
- Stainless steel braiding over braided PVC for strength
- Stainless steel braiding over braided PVC for strength
- Durable
- Stainless steel crimp sleeves
- Poly bagged
Product description
This 3/4 inch lead free hose connection vacuum breaker permits the attachment of portable hoses to hose thread faucets and prevents the reverse flow of polluted water from entering into the potable water supply due to back siphonage. It consists of a lead free body construction, stainless steel working parts, a rubber diaphragm and disc, a draining stem, and a break-away set screw for tamper resistant installations. It is ideal for inside and outside, health hazard installations requiring non-continuous pressure such as service sinks, swimming pools, photo developing tanks, laundry tubs, wash racks, dairy barns, marinas, and general outside gardening uses. The maximum pressure is 125 psi (8. 6 bar). It is imported.
- Lead free construction
- Durable rubber diaphragm and disc for consistent positive seating
- Max temperature is 180 degrees F
- Easy to install for contractors or homeowners
Latest Reviews
View all
General Electric Light Bulbs
- Updated: 15.05.2023
- Read reviews

Skechers Clogs
- Updated: 11.02.2023
- Read reviews

Apex Computer Cases
- Updated: 01.07.2023
- Read reviews

Falcon Easy Day Hikes Rocky Mountains
- Updated: 20.01.2023
- Read reviews

Bestar Workstations
- Updated: 13.06.2023
- Read reviews

General Electric Light Bulbs
- Updated: 15.05.2023
- Read reviews

Skechers Clogs
- Updated: 11.02.2023
- Read reviews

Apex Computer Cases
- Updated: 01.07.2023
- Read reviews

Falcon Easy Day Hikes Rocky Mountains
- Updated: 20.01.2023
- Read reviews

Bestar Workstations
- Updated: 13.06.2023
- Read reviews

General Electric Light Bulbs
- Updated: 15.05.2023
- Read reviews