12 best lawn mower blades

Product description

MaxPower's 331740B includes 1 mower blade for many 22 in. cut Craftsman, Husqvarna and Poulan mowers. This blade replaces OEM #s 420463, 421825, 532-421825, 437601, 532420463 and 532437601. Also fits Craftsman CMXGZAM100130. This blade measures 22 in. L and 2-1/2 in. W with a 5 point star center hole. To ensure proper fit, please verify the OEM # of the blade you are replacing matches the OEM # listed in this description. MaxPower blades are proudly manufactured in the USA to meet or exceed OEM specification.

• Includes 1 mower blade for many 22 in. cut Craftsman, Husqvarna and Poulan mowers
• Replaces OEM #'s 420463, 421825, 532-421825, 437601, 532420463 and 532437601.
• Also fits Craftsman CMXGZAM100130
• Measures: 22 in. L and 2-1/2 in. W
• 5 point star center hole

User questions & answers

Question:	what does a 5 point star center hole mean
Answer:	These are small size. If you look at the image of the package, at the top it says "1 pair small". I ordered these and they are quite small. I ordered another set in the original size because they feel too small for me.
Question:	Will this fit my husqavarna hu800awd
Answer:	I’m really not sure, but I sat up close at an Alice In Chains concert and for once was able to enjoy the music without my hearing being assaulted.
Question:	my parts manual says blade #421826 but all I see are blade # 421825, are they the same blade
Answer:	yes I wear them every night. it is the only way my husband and I can sleep in the same room!! I am so used to them that I can't sleep without them anymore. amazing if your spouse snores .
Question:	Anyone else have an issue with this blade leaving circle marks In your yard? I didn't have That issue until i replaced my blade with this one
Answer:	I found that "A NASCAR race car is measured to be about 125-130 decibels"....the Hearos earplugs reduce the decibles up to...or down to... 20 decibles, so that would be 105-110 decibles of noisen depending of seating, with the earplugs in. Based on CDC statictics, you could listen to about 91 decibles of noise for about 2 hours, without it starting to impact hearing. So I would recommend buying/using a stronger decible reducing earplug for the NASCAR races... good luck!

Product features

For All Your Outdoor Power Equipment Needs

Shop MaxPower for ALL of your small engine replacement parts. Blades, filters, trimmer line, belts, chainsaw parts, engine parts, wheels, tubes and MORE!!

USA Manufacturer

We proudly manufacture the following items at our state of the art facilities in Glennville, GA and Phoenix, AZ:

• Mower Blades
• Edger Blades
• Trimmer Line
• Foam and cartridge style air filters

Heat Treat Process for Mower Blades

Foam Filter Manufacturing

Cartridge Filter Line

Trimmer Line Extrusion

Product description

Oregon is the world leader in chainsaw guide bars. It brands bars for many major chainsaw manufacturers and sells Oregon brand in the replacement market worldwide. Oregon chains are used as original equipment by 90% of the world's chainsaw manufacturers & by most of the world's professional Loggers, farmers, & homeowners. Oregon also produces replacement mower blades, belts, & several other aftermarket replacement parts for power equipment.

From the Manufacturer

Balanced blades help increase the life of your mower and reduce operator fatigue due to vibrations

• A balanced blade reduces engine wear and stops vibrations
• Provides a smoother cut when used frequently
• Created with quality zinc die-casting

User questions & answers

Question:	I have seen several posts that indicates these will not work correctly on star shaped holes. Is there a type or model that will? Thanks
Answer:	Hi, no it doesn't shuffle the cards. This is shoe that it use in Blackjack games and its for dealing the cards.Thank you.Bobby
Question:	So what is the verdict, on blades with star holes
Answer:	Sorry. I don’t know what the gathering card is ...
Question:	will the oregon 42-100 blade blancer work on a blade with a star in the midle on a cub cadet mower
Answer:	2 decks, it is in the name...104 cards. there are 4 and 8 deck holders also 52 cards to a deck
Question:	what is the widest diameter hole this will fit? I'm trying to balance a blade with a 2.06" hole in the center
Answer:	two c batteries
Question:	Does it shuffle the cards
Answer:	The two decks are mixed together if they are put into the shuffler at the same time. If you want decks shuffled separately, the decks have to be shuffled independently (individually).
Question:	Will a sleeved card, say a Magic the Gathering card, work in this
Answer:	We only use two decks and it works just fine. Hope it lasts better than the last two I bought from Kohls
Question:	How many cards it can hold
Answer:	Yes. You can shuffle up to 4 decks.

Product features

Oregon Mower Blade Balancer

A blade balancer ensures that you have an even sharpening of your blade to extend the life of your machine. Oregon's blade balancer provides accurate blade balancing to increase the life of your mower and reduce vibrations, while providing a smoother cut.

Our blade balancer works best on circular blade patterns but accommodates for all style mower blade holes and allows for a quick & precise balancing.

Using the blade balancer

Begin using by placing the blade balancer on a leveled table. Place the blade onto the balancer and using the cone to begin the balancing process. Once in place, your blade will either stay perfectly horizontal, or it may fall to either side depending on where more material is distributed.

Once you have identified which side is heavier, grind it down slightly and check the blade on the balancer, repeating the process until blade is balanced. This tool will provide the precision you need so you can make your work efficient and enjoyable.

Product description

Poulan Pro 21-Inch Premium Mulching Blade #PP23020. For the finest looking lawn, you need to have a sharp lawn mower blade; this replacement blade keeps your lawn mower working at its optimum level.

• Brand Name: Poulan
• 21-Inch Premium Mulching Blade
• Country of Origin: United States
• Model Number: 531307213

User questions & answers

Question:	does this blade fit weed eater push mowers
Answer:	USD
Question:	Does this blade work with a poulan pro 625e series
Answer:	Hi there, it's one huge towel that does the job of about four! Let us know if you have any other queries. The towel is incredible. We designed it for ourselves as we were so disappointed with everything else available. RDTs.
Question:	where can i get drive belt for poulan pro front wheel drive 625e
Answer:	Yep supposedly drys a whole with one towel but it doesn’t, unless you like water spots .
Question:	Does this blade fits a poulan pro 500e series
Answer:	Approximately 1ft 3 in. I used them to wipe off detail spray after washing car. Very good.

Product description

GreenWorks 21" replacement lawnmower blade for all GreenWorks 21" electric corded

• Compatible With Greenworks Mower 25112
• Genuine 21-Inch Replacement Blade
• Consult Owner'S Manual For Proper Part Number Identification And Proper Installation Please Note: Does Not Fit Greenworks 80V 21-Inch Mower - Refer To 2903402
• Assembly Required

User questions & answers

Question:	Will this fit MO60L
Answer:	the small yip of the balancer should fit into the star hole. If you have slack space use a little plumber's putty to keep it in place. That will not affect the results.
Question:	can i use this on model 25212 (part number
Answer:	i don't like blade with star holes. that what the verdict is
Question:	Will this blade fit on the Kobalt 80 volt mower with a 21 inch blade
Answer:	yes
Question:	Will this blade work for model 25213 that has a 21" deck
Answer:	I was wondering if someone who already purchased one of these Oregon balancers could measure the diameter of each cylinder on this balancer and post them here. I'm assuming that you'll use a digital caliper for this purpose, I'd prefer if you'd measure them in the metric system, for e.g. 8.26 mm, 9.57 mm, etc., but of course, I will be very happy for the numbers if they're in inches.I need these numbers, because I do believe, that this balancer will only work for you on the satisfactory level if the diameter of the given cylinder that your blade could still slide on, it is exactly the same size as the center hole of the blade minus 0.1-0.2 millimeters. If the difference is more than that, the blade won't be sitting exactly in the center of the cone and the whole thing looses its purpose.The blade of my lawn mower happens to have a 19.6 mm diameter center hole, therefore ideally it would be the best if the diameter of the given cylinder of the balancer would exactly 19.6 or anywhere between 19.6 and 19.4.

Product features

About Us

Greenworks is in battery-powered outdoor power tools for consumers and landscaping professionals. The company distributes Greenworks and private label products, as well as products for an extensive network of Original Equipment Manufacturers. With a robust lineup of Greenworks products including 24-volt, 40-volt, 60-volt, 80-volt and commercial-grade 82-volt battery-powered outdoor power equipment, a full line of corded equipment, and reel mowers, Greenworks offers the right tool for every job.

Utilizing technology, Greenworks tools deliver the power and performance of comparable gas-powered tools without the mess, noxious fumes, stamina-reducing vibration and noise associated with gas products.

Product description

Greenworks 16" replacement lawnmower blade for all Greenworks 16" electric corded & cordless lawnmowers compatible with many 16" mowers on the market.

• 16-Inch mower blade compatible with GreenWorks 16-inch mowers
• Compatible with models 25142 and 25322
• Made with coated Steel
• Includes 1- 16-inch blade
• Genuine GreenWorks replacement part
• Actual Blade length is approximately 1" shorter then mower deck size to allow clearance between blade tip and deck edge.

User questions & answers

Question:	will this work with a GreenWorks
Answer:	Hello JRS, No, this item fits model 25112. The blade for MO60L00 is 2903402. If you need assistance finding the part please kindly please visit our website and contact us through email.
Question:	When will this be available again
Answer:	Hello there, Model 25212 is not coming up for us. If this is a model number outside of North America we will not be able to identify it.
Question:	Can I also purchase the piece that attaches the blade to the mower? What is it called
Answer:	Think you 'd better check the Website to make sure whether it fits or not.
Question:	Does this work for Mj403e
Answer:	Yes, this is the correct blade.

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This mulching blade (part number 587199603) is for lawn mowers. Mulching blade 587199603 is contoured to swirl grass clippings inside the deck, while the blade's long edges recut the clippings into smaller pieces. This blade is 22 inches long and is sold individually. Wear work gloves to protect your hands when installing this part.

• Wear work gloves to protect your hands when installing this part
• Mulching blade 587199603 is contoured to swirl grass clippings inside the deck, while the blade's long edges recut the clippings into smaller pieces
• Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Husqvarna
• This mulching blade (part number 587199603) is for lawn mowers
• This blade is 22 inches long and is sold individually

User questions & answers

Question:	Does it come already sharpened
Answer:	yes, it works perfect. make sure you have the correct hole in the middle. one is a star type. my yard guy didn't check until i ordered the wrong one first.
Question:	Will this fit Honda/Craftsman 22 inch mower
Answer:	There is the main central hole for your nut to attach, then there are two smaller holes either side. On my mower these holes are filled by a couple of protruding divots which then keep the blade in position and prevent it from spinning around. The blade also has two holes further out near the end, one each side, but I am not sure what function they have, none that I can see.
Question:	Does this blade fit sears mowers
Answer:	I'm not sure
Question:	Is this a genuine oem part or third party? and it is a star mount
Answer:	No star just a round hole in the centre

Product description

Genuine Original Equipment Manufacturer (OEM) parts! This 4-in-1 blade (part number 580258102 ) is for lawn mowers. This 4-in-1 blade 580258102is for mulching, lifting, bagging and shredding the grass clippings. Wear work gloves to protect your hands when installing this part. For Husqvarna & Craftsman.

• This part is compatible with models including; 96133001904,7021P (96133001904),917290810
• This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including; 580258101
• Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Husqvarna,Craftsman
• This 4-in-1 blade (part number 580258102 ) is for lawn mowers
• Wear work gloves to protect your hands when installing this part

User questions & answers

Question:	Why does it say 24 x 8 x 4” in your product description? I need a blade for a 21 inch lawnmower which it says it is. Is that the box size that you are
Answer:	Hello there, No, this blade is for GreenWorks units 25142 and 25322.

Product description

GreenWorks 19-Inch Replacement lawnmower blade for all GreenWorks 19-inch electric corded and cordless lawnmowers Compatible with many 19 inch mowers on the market.

• 19-Inch mower blade compatible with GreenWorks 19-inch deck mowers
• Compatible with mower model 25223
• Made with coated steel
• Includes 1- 19-inch blade
• Genuine GreenWorks replacement part
• Actual Blade length is approximately 1" shorter then mower deck size to allow clearance between blade tip and deck edge.

User questions & answers

Question:	will this fit modei
Answer:	It does hit stuff. You have to remove that stuff too and put it back together
Question:	Will this fit model
Answer:	YES
Question:	How much torque should be used to secure the blade
Answer:	I just purchased this light and I see comments about the light staying on all the time while the zero turn is running. here's what I know, Ariens did not run the wire from the keys light position, L and A2 to the light, they came off B and A1 so the Purple wire is energized when the mowers running. Now I'm not giving wiring advice, but here's what I did, I ran a wire from the 3 amp fuse (purple ) to A2 and a wire from L to the lights +12v , the black goes to - 12v ground
Question:	will this work on NeutonCE
Answer:	I wish I could really answer you question, but there is nothing on the paperwork that I have that mentions how many watts the light is. I even searched Ariens website with no results. It’s pretty bright, good enough for me to be able to mow at night. Hope that helps some!

Product features

About Us

Greenworks is in battery-powered outdoor power tools for consumers and landscaping professionals. The company distributes Greenworks and private label products, as well as products for an extensive network of Original Equipment Manufacturers. With a robust lineup of Greenworks products including 24-volt, 40-volt, 60-volt, 80-volt and commercial-grade 82-volt battery-powered outdoor power equipment, a full line of corded equipment, and reel mowers, Greenworks offers the right tool for every job.

Utilizing technology, Greenworks tools deliver the power and performance of comparable gas-powered tools without the mess, noxious fumes, stamina-reducing vibration and noise associated with gas products.

Product description

Maxpower’s 331528B mulching blade fits many 21” cut MTD, Cub Cadet, Troy-Bilt and Craftsman mowers. It replaces OEM # 742-04100, 742-0741, 742-0741A, 942-0741 and 942-0741A. Also fits Craftsman CMXGZAM100067. This blade measures 21" in length and 2-1/4" in width with a bow tie center hole design. To ensure a proper fit, please check your owner's manual to verify the proper replacement blade number and be sure that it matches one of the OEM numbers listed in our description. MaxPower's mower blades are manufactured to meet or exceed OEM specifications.

• Replaces OEM numbers 742-04100, 742-0741, 742-0741A, 942-0741 and 942-0741A
• Also fits Craftsman CMXGZAM100067
• Includes 1 mulching blade for many 21” cut MTD, Cub Cadet, Troy-Bilt and Craftsman mowers
• Measures 21" in length and 2-1/4" in width
• Bow tie center hole design
• Manufactured to meet or exceed all OEM specifications
• Check your owner's manual to verify the OEM number of the blade being replaced matches one of the OEM numbers provided for this item
• Proudly made in the USA

User questions & answers

Question:	does the spacer come with it i need the spacer that sits behind blade
Answer:	No spacer is included. Just the blade.
Question:	My mtd pro mower blade is 21inch in length but the descriptions of this blade says 23 inch. does this fit mine? thx
Answer:	The description is probably measuring the packaged item. The blade is a 21 inch cut.
Question:	Will it fit craftsman
Answer:	I bought one exactly like this one by Genuine Parts. The blade has no sharp edge. Is this the way all blade come an have to be sharpened before use? Actually a question and not an answer.
Question:	Will this fit a Troy built 21’ push mower
Answer:	I have a TB280ES mower (21" blade) and this item works perfectly.

Product features

For All Your Outdoor Power Equipment Needs

Shop MaxPower for ALL of your small engine replacement parts. Blades, filters, trimmer line, belts, chainsaw parts, engine parts, wheels, tubes and MORE!!

USA Manufacturer

We proudly manufacture the following items at our state of the art facilities in Glennville, GA and Phoenix, AZ:

• Mower Blades
• Edger Blades
• Trimmer Line
• Foam and cartridge style air filters

Heat Treat Process for Mower Blades

Foam Filter Manufacturing

Cartridge Filter Line

Trimmer Line Extrusion

• Mulching & Bagging Blade.
• Fits all Craftsman 21-in. lawn mowers (source 71).
• Also fits Husqvarna, Ariens, Poulan, Poulan Pro, Weed Eater & Yard Pro 21-in. lawn mowers.
• Replaces manufacturer's #189028.
• Round Center Hole.

Product description

MaxPower's 561713B 2-blade set fits many 42-in cut Poulan, Husqvarna and Craftsman mowers. This blade set replaces OEM numbers 127843, 138498, 138971, 138971X431, 53-21278-43, 53-21384-98, 53-21389-71, 532 13 84-98 and 532 13 89-71. Also fits Craftsman CMXGZAM110136. Each blade in the set measures 21-in long by 2-1/4-in wide with a 5 point star center hole. To ensure proper fit, please verify the OEM number of the blade you are replacing matches the OEM number listed in this description. MaxPower blades are proudly manufactured in the USA to meet or exceed OEM specifications.

• Replaces OEM numbers 127843, 138498, 138971, 138971X431, 532138971, 53-21278-43, 53-21384-98, 53-21389-71, 532 13 84-98 and 532 13 89-71
• Also fits Craftsman CMXGZAM110136
• Includes 2 blades for many 42-in cut Poulan, Husqvarna, and Craftsman mowers
• Each blade measures 21-in L x 2-1/4-in W
• 5-Point star center hole
• Manufactured to meet or exceed all OEM specifications
• Check your owner's manual to verify the OEM number of the blade being replaced matches one of the OEM numbers provided for this item
• Proudly made in the USA

User questions & answers

Question:	Will these work to replace 942-0616A
Answer:	Not real sure. He has two different types and they both work.
Question:	what is the star hole size is it one inch
Answer:	These are made from metal and plastic.
Question:	Does this work well with a bagger? Does anyone have either good or poor experience with this blade and baggers
Answer:	The most recent models would be the GT models (gatinko layer series).
Question:	Is this high lift blade
Answer:	I believe so, but I'm not quite sure.

Product features

For All Your Outdoor Power Equipment Needs

Shop MaxPower for ALL of your small engine replacement parts. Blades, filters, trimmer line, belts, chainsaw parts, engine parts, wheels, tubes and MORE!!

USA Manufacturer

We proudly manufacture the following items at our state of the art facilities in Glennville, GA and Phoenix, AZ:

• Mower Blades
• Edger Blades
• Trimmer Line
• Foam and cartridge style air filters

Heat Treat Process for Mower Blades

Foam Filter Manufacturing

Cartridge Filter Line

Trimmer Line Extrusion

Product description

FEATURES

1. This is a newly designed Lawn Mower Blade Sharpener， Most lawn mower blade sharpeners on the market contain poor quality sharpeners. Our heavy corundum grinding stones are carefully designed, thickened grinding wheels, and more durable. Our premium lawn mower blade sharpeners are specially designed for garden craftsmanship to deal with the dullest blades.

2. The bottom plate of the sharpener on the market is made of plastic. Our bottom plate is made of aluminum alloy, which is durable and not easy to wear.

SPECIFICATIONS

Material: Abrasive wheel, aluminum alloy

Finish: Gray

size: 50 x 60 mm / 1.96 x 2.36 inch

Package Includes: 

3 x Lawn Mower Blade Sharpener

1 x Lawn Mower Blade Balancer

How to use a lawn mower blade sharpener?

1. If it is an electric lawn mower, please make sure that the power is off.

2. Place the edge of the blade between the sharpening stone and the plastic plate, start the electric drill, and move the whetstone along the edge of the blade. After a few minutes, the blade is shar.

Service Commitment: 

Save the expensive cost ot buy blades. This product supports 60 days unconditional refund, 365 days replacement service.，we will provide you with a solution within 24 hours. 100% assured purchase.

• [New Upgrade Knife Sharpener]: The baffle at the bottom of the new lawn mower blade sharpener is made of high temperature resistant aluminum alloy, which is not easy to rust, which effectively prevents the abrasion of the baffle and prolongs the frequency of use.
• [High-Quality Grinding Wheel]: Durable and durable grinding wheel. We have remodeled the shape of the grinding wheel so that the lawn mower blade sharpener will not collapse or break during use, and it has a long service life and can be used for a long time.
• [Wide Range Of Use]: Suitable for most electric drills, manual drills can also be easily installed and used. Blade sharpeners are used to sharpen lawn blades, drill blades, rotary tillers, lawn mowers, sickle mowers, etc.
• [Easy To Install]: Quick installation in 10 seconds, just install it on any drilling rig to effectively and quickly smooth the blunt blades. Effectively reduce time and energy and improve production efficiency. The mower blade balancer ensures that the mower blade is sharper, just like a new knife.
• [Service Commitment]: Save the expensive cost of buying blades. The product supports 60-day unconditional refund and 365-day replacement service. If you have any questions about the product, you can contact us and we will provide you with a solution within 24 hours. 100% guaranteed purchase.

User questions & answers

Question:	What is the quality of the whetstone of the lawn mower
Answer:	I just picked this up and it does fit the 21" mower that I have. The detentions do look like the box that it came in.
Question:	Will the bottom baffle melt during work
Answer:	Hello there, Yes, this blade will work with model 25242.
Question:	How many whetstones are in the package
Answer:	Don't know. Either query Amazon or buy it directly from Greenworks.
Question:	Can I use it to sharpen the blade
Answer:	not sure did you lose the other piece...maybe the greenworks website has it