13 best briggs stratton lawn mowers

Product description

Briggs & Stratton 18 oz 30 w

From the Manufacturer

Genuine Briggs & Stratton 18 oz. bottle of high quality SAE 30 W detergent oil that is specially formulated for higher operating temperatures of air-cooled engines.

• High quality SAE30 oil
• Specially formulated for higher operating temperatures of air cooled engines
• This OEM oil ensures proper fit and performance to maintain the life of your Briggs and Stratton equipment

User questions & answers

Question:	it is ok for power generators
Answer:	The Jaws come all the way together when closing
Question:	is full sinthetic or sinthetic blend
Answer:	That is not a good idea. The fact that you're dealing with a weakened bolt means you're asking for it to break off down in the hole when impacted. Even if the stud extractor doesn't break the stud might and you're worse off than before.
Question:	Does this work on a Troy Bilt pressure washer
Answer:	It should as long if you can get enough of it inside the socket
Question:	Can it be used in a snow blower
Answer:	It only goes to 19mm

Product features

Briggs & Stratton Engine Oil

Briggs & Stratton small engine oil is designed and proven to meet the demands of 4-cycle engines. Our oil products have been approved by Briggs & Stratton engineers, recommended in all operator manuals, and is a high-quality detergent oil classified SJ/CD by the API.

Small engine oil type recommendations:

Different oil types can work best at certain temperatures. Learn which one to choose for your climate:

• SAE 30- Warmer temperatures, most common oil for small engines
• SAE 10W-30- Varying temperature range, this grade of oil improves cold weather starting, but may increase oil consumption
• Synthetic SAE 5W-30- Best protection at all temperatures as well as improved starting with less oil consumption
• SAE 5W-30- Very cold temperatures
• Vanguard 15W-50- Varying temperature range. For continuous-use, such as commercial lawn cutting or pressure washing

When choosing lawn mower oil, use a high quality detergent oil classified as 'For Service SF, SG, SH, SJ' or higher. Do not use special additives.

Synthetic oils are an acceptable oil at all temperatures. Use of synthetic oil does not alter required oil change intervals.

Different oil types can work best at certain temperatures. Learn which one to choose for your climate.

Product description

Perfect your lawn with Craftsman 140cc 21" 3-In-1 push lawn mower. Powered by a 140cc engine with a recoil start & auto choke, this push lawn mower is equipped with both side & rear discharge & mulching capabilities. It comes with a 21" Cutting deck that allows you to mow wider areas of grass with fewer passes- perfect for small- or medium- sized yd. It is equipped with a dual lever that allows you to adjust the trimmings between 6 different heights. The durable 7" Front & 8" Rear wheels are made with zag treading to provide more traction when mowing your lawn. Backed by a 2 year.

• Your purchase includes One Craftsman M105 140cc Gas powered Push Lawn Mower, One bagger and engine oil
• Lawn Mower width – 21” | Weight – 65 lbs. | Minimum Cutting Height – 1.25” | Maximum Cutting Height – 3.75” | Front wheel size – 7” | Rear wheel size – 8” | Engine – 140cc Briggs and Stratton
• 3 in 1 Capabilities: Unit has side discharge, rear discharge, and mulching
• Minor assembly is required but is easily accomplished with little to no mechanical experience
• Engine comes equipped with recoil and auto choke. No more fussing with a primer or choke - just pull to start. Unit is gas-powered and not self-propelled. Product folds for storage

User questions & answers

Question:	Does it come with the oil
Answer:	Yes, just be sure you put the oil in the engine.
Question:	who makes the engine
Answer:	Briggs and Stratton
Question:	Is this self-propelled? if not, any suggestions? i'm looking for something that is not self-propelled
Answer:	Hello there! Thank you for your interest in this product. This mower is push driven (i.e. not self-propelled).
Question:	Does the handle fold down for storage
Answer:	Your mower may have arrived in a box with the handle already folded down somewhat. Just loosen those same bolts and fold the handle down. If you bought the mower with the handle already in place, just loosen the 2 bolts 2/3 the way down the handle (toward the mower) on each side and fold the handle. It may require taking out one bolt from each side.

Product description

Perfect your lawn with Craftsman 159cc 21" 3-In-1 FWD lawn mower with bagger. Powered by a 159cc engine with a recoil start & auto choke, this front-wheel drive lawn mower is equipped with both side & rear discharge & mulching capabilities. It is equipped with a 21" Cutting deck that allows you to mow wider areas of grass with fewer passes- perfect for small- or medium-sized yd. It comes with a dual lever that allows you to adjust the trimmings between 6 different heights. The 8" Front & 11" Rear wheels are made with zag treading to allow more traction. Backed by a 2 year.

• POWERFUL 159CC OHV GAS ENGINE: Powerful gas engine comes equipped with recoil and auto choke. No more fussing with a primer or choke - just pull to start!
• 3-IN-1 CAPABILITIES: Unit has side discharge, rear discharge, and mulching capabilities.
• FRONT WHEEL DRIVE: Tip-up, turn, and maneuver around level terrain with ease.
• SELF PROPELLED AND VARIABLE SPEED: Move around your yard with less effort and the propulsion speed of your choice.
• DUAL-LEVER ADJUSTABLE CUTTING HEIGHT: Choose from 6 different height settings to suit user’s needs.
• 11-INCH REAR TIRES: Zag tread tires on unit measure 8 inches in the front and 11 inches on the rear to tackle uneven terrain.

User questions & answers

Question:	What is the range of heights that it cuts
Answer:	3 inches and so far is a great purchase.
Question:	Where do i find the clips for the bag
Answer:	Not sure what you are asking. There are no clips needed to secure bag to mower for use if that’s what you are asking.
Question:	Does this product comes alrekady assembled
Answer:	Yes Just minor assembly
Question:	What weight oil does it take
Answer:	30 weight

Product description

Keep your lawn looking great with the Yard Machines Push Mower. The Yard Machines 132cc 4-cycle push lawnmower is perfect for small to medium-sized residential yards and delivers solid, efficient power to tackle the job. Equipped with a 132cc OHV engine and a compact 20-inch frame, you will be able to maneuver around tight corners and shrubs easily. The manual height adjuster will allow you to adjust to three different mowing heights very easily. This push mower is lightweight, has a loop handle and durable 7-inch wheels. Item is not for sale in California. This Yard Machines mower is backed by a 1-year limited warranty.

• 132CC GAS ENGINE: Reliable gas engine perfect for mowing small-medium sized yards. Battle tested and battle ready to get the job done effectively and efficiently.
• 3 CUTTING HEIGHT POSITIONS: Cut the grass down to your ideal size! Whether your lawn needs a light trim or a full cut, choose the height that is right for you.
• 20-INCH CUTTING DECK: Side discharge deck with 20” cutting width. Trim more in less time with its sizeable deck size.
• 7 X 7 INCH WHEELS: Lightweight design with 7-inch rear and front wheels for easy maneuverability giving you optimal command and control during operation.
• WARRANTY: 1-year limited.

User questions & answers

Question:	where is this mower made
Answer:	These are not good gloves for cold weather. I wore these gloves for the first time during my walk into work this morning. It was 13 degrees Fahrenheit, and my fingers were very cold within the first 2 minutes. I'm initiating a return. I am so sick of these gloves claiming to keep your hands warm. Maybe this is true in warmer climates where a cold winter's day mean's it's in the 30's, but I'm in Michigan and these gloves are a joke.
Question:	What kind of oil does it use
Answer:	We have only used them for snow shoeing in 30 degree weather. They worked fine for that, but skiing I'd be a little cautious.
Question:	Can you attach a bag to this mower
Answer:	I also wore a large motorcycle glove and bought these in a large size and they fit perfect
Question:	Is this 2 cycle or 4 cycle
Answer:	Yes, you can use this gloves for playing tennis, there has anti-skid silica gel design on palm and fingertips, making you hold the handlebar tightly and firmly. Thanks!

Product features

Yard Machines 140cc 20-Inch Push Mower

Keep your lawn looking great with the Yard Machines Push Mower. The Yard Machines 140cc 4-cycle push lawnmower is perfect for small to medium-sized residential yards and delivers solid, efficient power to tackle the job. Equipped with a 140cc OHV engine and a compact 20-inch frame, you will be able to maneuver around tight corners and shrubs easily. This push mower is lightweight, has a loop handle and durable 7-inch wheels. Item is not for sale in California.

Reliable Engine

Powered by a durable 140cc OHV engine to get the job done quickly.

Sturdy Handle

Comes with sturdy loop handle for easy operation and extra comfort.

Durable Wheels

Designed with 7" x 7" wheels on the front and rear for easy maneuverability.

Side Discharge Chute

Equipped with a 20" deck with a side discharge capability.

Product description

Keep it running - keep it genuine. Help keep your outdoor power equipment running at peak performance by ordering Briggs & Stratton replacement & maintenance parts. You can find the right part you need including carburetors, air filters, spark plugs, tune-up kits & other engine repair parts. Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured & tested to help deliver optimum performance in Briggs & Stratton engines.

• This Product Adds A Great Value
• Genuine Briggs & Stratton Part
• This Product Is Manufactured In United States
• No Assembly Required

User questions & answers

Question:	Is the diode included in this part
Answer:	Not to my knowledge
Question:	Need alternator for craftsman lawn tractor model917.274641 18.5 hp dt 4000, where can i buy one
Answer:	I tried on at local store then purchased at Amazon for cheaper price.$59

Product description

Highlights: tune-up kit model Compatibility: 625E, 675Ex, 725Ex series, 625-675 series & Quantum 3 5-6 75 HP push mower engines Includes: 4-cycle 30W oil 18oz, fuel treatment & stabilizer, air filter, spark plug boxed

• Help keep your outdoor power equipment running at peak performance by using Briggs & Stratton replacement and maintenance parts
• Only Briggs & Stratton genuine Parts are specially designed to exact OEM standards, Manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full coverage, always use genuine parts from Briggs & Stratton
• This is an O. E. M. Part
• power source type: self-propelled

User questions & answers

Question:	Does this works for Model #917.370920 Craftsman
Answer:	If your mower mulches, it should.
Question:	I have a toro with a b&s model 286h77 type 0615 e1 code 06011 e2e engine. will this tune up kit work or if not, do you sell one that would
Answer:	No, this kit fits serial numbers ranging from MZCG-6000001 to MZCG-7999999.
Question:	Will this kit fit my Craftsman lawn mower
Answer:	Yes it will fit
Question:	does this will fix on model number
Answer:	I would think it would as it says HRR216 Series. I also typed in your model number and came up with the same item. One of my blades had a little different shape from the original but it works fine. We are already cutting grass in TX.

Product features

Briggs & Stratton Tune-Up Kit

You don’t have to be a mechanic to tune up your own lawn mower at home. In just half an hour and four easy steps, you can tune up your push mower with the help of a Briggs & Stratton engine tune-up kit. There are numerous benefits to tuning up your mower at home, including an easier start, a better run, and reduced emissions (which helps the environment), saving you money on the costly repairs that can result from engine deterioration.

Air Filter Installation Instructions

1. Unscrew and remove cover (A).
2. Remove air filter cartridge and pre-cleaner (B).
3. Install dry pre-cleaner on filter cartridge (C). Do not oil the pre-cleaner.
4. Install air filter assembly on base, then install cover and screw.

1. Unscrew and remove cover (A).
2. Remove air filter cartridge and pre-cleaner (B).
3. Install dry pre-cleaner on filter cartridge (C). Do not oil the pre-cleaner.
4. Install air filter assembly on base, then install cover and screw.

Changing Spark Plugs

1. Remove spark plug by disconnecting the spark plug lead and removing the plug using a spark plug socket.
2. Clean any deposits from the plug with a wire brush or spray-on plug cleaner.
3. Inspect the plug for heavy deposits, cracked porcelain, or burned away electrodes. If any of these exists, replace the spark plug.
4. Use a spark plug gauge to measure the gap between the two electrodes at the tip of your spark plug. (Many small engines require a .030" gap. Check for the specifications for your model)
5. If necessary, use a spark plug gauge to adjust the gap by gently bending the curved electrode. When the gap is correct, the gauge will drag slightly as you pull it through the gap. 
6. Reinstall the plug, taking care not to over-tighten (15 ft. lbs. MAXIMUM ). Then, attach the spark plug lead.

Air Filter Upgrade Instructions

1. Remove and retain screw (A) for later reassembly.
2. Remove and discard the original cover (B), filter (C), filter cup (if equipped), base (D), and gasket (E).
3. Install new gasket on carburetor, then install new base.
4. Saturate new filter in clean engine oil, then squeeze to remove excess oil. Place filter in base.
5. Install cover and secure the air filter assembly to the engine with the original screw.

1. Remove and retain screw (A) for later reassembly.
2. Remove and discard the original cover (B), filter (C), filter cup (if equipped), base (D), and gasket (E).
3. Install new gasket on carburetor, then install new base.
4. Saturate new filter in clean engine oil, then squeeze to remove excess oil. Place filter in base.
5. Install cover and secure the air filter assembly to the engine with the original screw.

Cleaning & Adjusting Small Engine Carburetors

1. Before starting any maintenance, be sure to consult your Briggs & Stratton operator's manual and follow all safety precautions.
2. Clean the main fuel jet (located in your carburetor's fuel bowl nut) with carburetor cleaner and compressed air to blow out loosened debris. 
3. After cleaning the carburetor, another key step for some float-type carburetors is adjusting the idle speed and mixture.

1. Before starting any maintenance, be sure to consult your Briggs & Stratton operator's manual and follow all safety precautions.
2. Clean the main fuel jet (located in your carburetor's fuel bowl nut) with carburetor cleaner and compressed air to blow out loosened debris. 
3. After cleaning the carburetor, another key step for some float-type carburetors is adjusting the idle speed and mixture.

Product description

Brand New Pack of Genuine Briggs & Stratton Air Filters... Authorized Briggs & Stratton Dealer... Sold Loose as Pictured, Pulled from Bulk Packs... Pack of Air Filters Genuine Briggs & Stratton Part # 491588s aka 491588 Width: 4-1/2" Length: 5-1/4" Height: 3/4" Genuine OEM Briggs & Stratton Filters

• Brand New Pack of Genuine Briggs & Stratton Air Filters... Authorized Briggs & Stratton Dealer... Sold Loose as Pictured, Pulled from Bulk Packs... Pack of Air Filters Genuine Briggs & Stratton Part # 491588s aka 491588 Width: 4-1/2" Length: 5-1/4" Height: 3/4" Genuine OEM Briggs & Stratton Filters

User questions & answers

Question:	Will this air filter fit a Husqvarna hu800awd model 961450011-02 (Honda engine
Answer:	Fairly true to size but the toe box area height and width is small, so you may want to go a 1/2 size larger if you have a wider foot.
Question:	does this fit in a honda eu7000is
Answer:	Because shopping online for shoes can be difficult, KEEN makes it as easy to send back any styles that aren't the right fit. For 30 days, you are welcome to return your shoes regardless of the condition. You can begin the return process within your Amazon order by selecting "return or replace items".

Product features

Briggs & Stratton Genuine Air Filters

Only Briggs & Stratton genuine parts are specially designed to exact Original Equipment Manufacturer (OEM) standards. Not only are Briggs & Stratton genuine parts designed to fit perfectly, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable emission regulations.

Changing a Paper Air Filter

Loosen the cover screw and tilt cover down. Carefully remove and discard the paper air filter. Install new cartridge with the paper pleats facing out. Close cover and tighten screw securely.

Changing a Foam Air Filter

Loosen screw from housing and remove air filter from assembly. Saturate the new Briggs & Stratton foam air filter with fresh engine oil. Wrap foam in clean cloth and squeeze to remove excess oil. Assemble foam air filter over edge of body and re-attach cover

Dual Element Air Filters

Remove knobs and cover from filter housing. Carefully remove foam pre-cleaner if necessary and clean area of any debris. Place new air filter with pre-cleaner, if necessary, and attach cover and knobs.

General Lawnmower and Small Engine Maintenance

Are you changing your oil, replacing your air filter and adding fuel stabilizer to your outdoor power equipment as frequently as you should be? General engine maintenance will help your engine last longer and run better. Using genuine parts on your Briggs & Stratton engine will make sure it fits right and runs the way it’s supposed to.

Product description

This flat panel style, Pleated-Paper air filter provides superior protection against the destructive effects of dirt ingestion. Used on select Quantum & 625-675 & 625E, 675E, 725E Series, & many other engines, This OEM part ensures proper fit & performance to maintain the life of your Briggs & Stratton engine.

• Material Type: Plastic
• Power Source Type: Non Powered

User questions & answers

Question:	i have a push mower .. briggs and stratton quantum power model #22545x92E .. about 15 years old .. 22" murray. i need an air filter .. please help
Answer:	The set I bought was the 3/8” drive size but I’m sure you can order the size you need including the 1/2” drive size.
Question:	Is the size exactly 5-1/4 x 4-1/2 x 1 in. ? The production at listing says different
Answer:	No they will not work on left handed threads the fins on the inside that catch the bolt head go the opposite direction
Question:	I have a Toro model 20372 with 6.5 HP engine. The engine is made by Toro, not Briggs and Stratton, Tecumseh, Honda, etc. Will filter fit this engine
Answer:	Look into a stud/bolt extractor - just be advise that these are bulky in case you are in close quarters.
Question:	Is this a Briggs and Stratton branded filter? Thanks
Answer:	What nicholas h. Said isnt true. There is a brand called rocket socket and they are the same thing but made in the usa. Probably a little better quality but they are twice the price so the choice is up to you.

Product features

Briggs & Stratton Genuine Air Filters

Only Briggs & Stratton genuine parts are specially designed to exact Original Equipment Manufacturer (OEM) standards. Not only are Briggs & Stratton genuine parts designed to fit perfectly, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable emission regulations.

Changing a Paper Air Filter

Loosen the cover screw and tilt cover down. Carefully remove and discard the paper air filter. Install new cartridge with the paper pleats facing out. Close cover and tighten screw securely.

Changing a Foam Air Filter

Loosen screw from housing and remove air filter from assembly. Saturate the new Briggs & Stratton foam air filter with fresh engine oil. Wrap foam in clean cloth and squeeze to remove excess oil. Assemble foam air filter over edge of body and re-attach cover

Dual Element Air Filters

Remove knobs and cover from filter housing. Carefully remove foam pre-cleaner if necessary and clean area of any debris. Place new air filter with pre-cleaner, if necessary, and attach cover and knobs.

General Lawnmower and Small Engine Maintenance

Are you changing your oil, replacing your air filter and adding fuel stabilizer to your outdoor power equipment as frequently as you should be? General engine maintenance will help your engine last longer and run better. Using genuine parts on your Briggs & Stratton engine will make sure it fits right and runs the way it’s supposed to.

Product description

Many engine performance problems can be linked to maintenance issues such as stale fuel, dirty air filter, fouled spark plug, and deteriorated oil. A great way to help avoid these problems would be to perform an annual tune-up. Your outdoor power equipment's air filter provides superior protection against the destructive effects of dirt ingestion. Used on many engines, this OEM part ensures proper fit and performance to maintain the life of your Briggs & Stratton engine.

• Fits 675exi series engines model 103M02 and 725exi series engines model 104M02.
• Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines
• There are no substitutes when it comes to keeping engine powered equipment healthy, to maximize engine life, meet original equipment specs and provide full warranty coverage, always use genuine parts from Briggs & Stratton

User questions & answers

Question:	Is this filter made in the usa? or does this support the economy of the ccp
Answer:	I used the same shoe size of my other shoes.
Question:	Would this fit my 11A-B13L
Answer:	They are the real deal. Made in Vietnam
Question:	Do you have the black plastic cover for this particular air filter? I have a toro lawn mower & I bought filter but still looking for cover. Thanks
Answer:	The KEEN.DRY waterproof membrane will retain some heat, so depending on how hot your feet get normally these might be too hot. We do offer the Terradora II in a ventilated option though (Terradora II Vent) if you like the look of this but want a more breathable option!
Question:	will this fit my craftsman high wheel trimmer model
Answer:	No composite or steel , just rubber toe!

Product features

Briggs & Stratton Genuine Air Filters

Only Briggs & Stratton genuine parts are specially designed to exact Original Equipment Manufacturer (OEM) standards. Not only are Briggs & Stratton genuine parts designed to fit perfectly, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable emission regulations.

Changing a Paper Air Filter

Loosen the cover screw and tilt cover down. Carefully remove and discard the paper air filter. Install new cartridge with the paper pleats facing out. Close cover and tighten screw securely.

Changing a Foam Air Filter

Loosen screw from housing and remove air filter from assembly. Saturate the new Briggs & Stratton foam air filter with fresh engine oil. Wrap foam in clean cloth and squeeze to remove excess oil. Assemble foam air filter over edge of body and re-attach cover

Dual Element Air Filters

Remove knobs and cover from filter housing. Carefully remove foam pre-cleaner if necessary and clean area of any debris. Place new air filter with pre-cleaner, if necessary, and attach cover and knobs.

General Lawnmower and Small Engine Maintenance

Are you changing your oil, replacing your air filter and adding fuel stabilizer to your outdoor power equipment as frequently as you should be? General engine maintenance will help your engine last longer and run better. Using genuine parts on your Briggs & Stratton engine will make sure it fits right and runs the way it’s supposed to.

Product description

Brand new after market Replacement fule pump for Briggs & Stratton 808656 691034, 808281, 692313, 491922, 808322, 557033, 808656Fits Most 12Y000, 185000 Model Briggs & Stratton EnginesReplace manufacturer part number:Kawasaki 49040-7001;Kohler 24 393 04-S,24 393 16-S;John Deree: LG808656 M138498 M145667Vacuum style fuel pump, fits 1/4-inch fuel lineYou will get 1 x Fuel Pump as picturedShip from USA warehouse Fuel Pump Compatible with Briggs & Stratton 808656 Replaces # 691034 808281 692313 557033

• Briggs & Stratton 808656
• Genuine Briggs & Stratton Fuel Pump Replacement
• Fits Most 12Y000, 185000 Model Briggs & Stratton Engines
• Replaces Old Briggs # 691034, 808281, 692313, 491922, 808322, 557033, 808656

User questions & answers

Question:	How long doesvit take to receive it
Answer:	I used to wear Nike and switched to Brooks. I wore 8.5 Nike and 8.5 Brooks
Question:	Will this work on 18.5 hp 42a
Answer:	No roll bar but are very supportive.
Question:	Will this pump lift
Answer:	how to order a wide shoe
Question:	is this the 808492 fuel pump? thats what it says on the picture but not the title
Answer:	They're comfortable for running. I've used them for walking, running and for work (at the time, work would equal 5 miles)

Product features

Briggs & Stratton Genuine Fuel Systems

Only Briggs & Stratton genuine parts are specially designed to exact Original Equipment Manufacturer (OEM) standards. Not only are Briggs & Stratton genuine parts assured to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable emission regulations.

How to Remove a Fuel Filter

Make sure to crimp both sides of the fuel line leading to the fuel filter to cut off the fuel supply. Once the fuel supply is cut off, slide the fuel line clamps away from fuel filter and remove filter

Common Fuel System Problems

Common problems associated with the fuel system are particles clogging the engine in the fuel line and carburetor. This can cause the engine to run unevenly and reduce performance.

Fuel Treatment

To help prevent fuel system issues add STA-BIL Storage to your gas can before filling it with clean, fresh fuel to stabilize fuel for long-term storage up to 24 months.

General Lawnmower and Small Engine Maintenance

Are you changing your oil, replacing your air filter and adding fuel stabilizer to your outdoor power equipment as frequently as you should be? General engine maintenance will help your engine last longer and run better. Using genuine parts on your Briggs & Stratton engine will make sure it fits right and runs the way it’s supposed to.

Product description

This foam element air filter provides superior protection against the destructive effects of dirt ingestion. Used on select 550e-550ex Series engines, this OEM part ensures proper fit and performance to maintain the life of your Briggs & Stratton engine.

• Briggs &Amp; Stratton 799579
• Genuine Briggs &Amp; Stratton Air Cleaner Foam Filter
• Fits Most 550E-550Ex Series 09P000, 08P000 Briggs &Amp; Stratton Engines With Foam Filter
• Country Of Origin: United States

User questions & answers

Question:	Can you provide the actual dimensions of the foam
Answer:	This tool is to be use hand tools
Question:	Is this filter in a tune up kit
Answer:	1yr
Question:	Will this fit model number 093j02-0068-F1. Briggs and Stratton lawn mower engine
Answer:	Yes you can but some work required
Question:	Murray 500 Type 1521 for pistol for a push mower
Answer:	I'm assuming that your question is if the plates in this set will crack if you use them with a hydraulic press to push out a wheel bearing instead of the included forcing bolt/nut. If so, no, they won't get damaged. The wheel bearing would probably disintegrate well before the plates crack. The real value of this set is that it could enable one to remove the wheel bearing while the steering knuckle is still on the car (theoretically eliminating the need to get a wheel alignment afterward). Anyway, if you do intend to use a hydraulic press you could probably find a cheaper set of bearing/race drivers which would accomplish the same thing.

Product features

Why Briggs & Stratton Genuine Parts?

Only Briggs & Stratton genuine parts are specially designed to exact OEM standards, manufactured and tested to help deliver optimum performance in Briggs & Stratton engines. Not only are Briggs & Stratton genuine parts guaranteed to fit, but using them ensures that the Briggs & Stratton engine they are installed on complies with applicable (EPA) emission regulations and helps maintain valuable warranty coverage.

Product description

31A507-0133-G5 Engine 31A507-0134-B1 Engine

31A507-0135-G1 Engine 31A507-0135-G5 Engine

31A507-0136-B1 Engine 31A507-0137-G5 Engine

31A507-0138-B1 Engine 31A507-0140-B1 Engine

31A507-0141-B1 Engine 31A507-0143-B1 Engine

31A507-0471-B1 Engine 31A507-0742-B1 Engine

31A507-0743-B1 Engine 31A507-0839-B1 Engine

31A507-0871-G1 Engine 31A507-0871-G5 Engine

31A507-1391-B1 Engine 31A507-1405-B1 Engine

31A507-1498-G1 Engine 31A507-1498-G5 Engine

31A507-1516-B1 Engine 31A507-1516-G5 Engine

31A507-2391-B1 Engine 31A507-2471-B1 Engine

31A507-3405-G1 Engine 31A507-3405-G5 Engine

31A507-4111-B1 Engine 31A507-4117-B1 Engine

31A507-4405-G1 Engine 31A507-4405-G5 Engine 

31A607-3026-G5 Engine 31A607-3472-G5 Engine

31A607-3496-G1 Engine 31A607-3496-G5 Engine

31A677-0036-E1 Engine 31A677-0036-G1 Engine

31A677-0119-E1 Engine 31A607-0026-G1 Engine

31A607-0111-E1 Engine 31A607-0113-E1 Engine

Also Fits Craftsman LT1000 lawn mower w/ Briggs & Stratton Intek Motor 31A707,31A777,31B775,31C707 Before Code Date - 08051406 

For 14hp-18hp INTEK engines this is a Nikki Style carburetor with antibackfire solenoid

Package include: 1 carburetor assembly, 1 air filter, 1 pre filter,1 fuel filter, 1 Oil filter.1 fuel shut-off valve, 2hose clamp,

• Carburetor replaces for Briggs Stratton Engines 591731 593514 594593 697141 697190 698445 699109 699937 791858 791888 792171 792358 793224 794572 790418 796109 794294 699916 593433
• Air filter replaces #: 797008 698083 677014 697634 795115 697153; Pre filter replaces #: 697015
• Carburetor for Intek 14 HP, 17.5 HP, 18 HP 280H06 280H07 280J07 280J77 281H07 285H07 285H77 286H07 286H77 28U707 28W707 28W777 31A507 31A607 31A707 31A777 31A807 31B707 31B775 31C707 31C777 31D707 31D777 31E577 31E607 31E677 31E707 31E777 31F707 31F777 31G707 31G777 31H707 31H777 31L777 31M777 31M877 31N707 31P677 31P707 31P777 31P877 31Q777
• 791858 carburetor stratton craftsman tractor motor carburetor briggs stratton tune up engines tractor replaces 794572 carburetor carburetor filter carburetor tune motor carburetor engines tractor
• 100% satisfactory service, if you have any questions, please feel free to contact us by email!We will solve it for you in the first time!

User questions & answers

Question:	Does this work for craftsman lt
Answer:	No sure you would call them officially slip resistant! I have 5 pair! I am 76 years old and wear them to run agility with my dogs and they have not slipped yet!
Question:	Will this fit a craftsman lt2000 with a 18hp intek
Answer:	yes it does
Question:	will this fit a dyt 4000 Craftsman riding mower
Answer:	Yes I remove the insole in all of my Brooks to put in my own orthotic.
Question:	Does this item fits a crafstman lt2000 31g777 riding mower
Answer:	Great fit. Love Glycerin 17 and 18

Product description

Genuine Briggs & Stratton battery charger. There are no substitutes when it comes to keeping engine-powered outdoor power equipment healthy. Briggs & Stratton genuine parts are specifically designed to exact OEM standards, Manufactured & tested to help deliver optimum performance on Briggs & Stratton engines. With genuine Briggs & Stratton OEM parts, you can help extend the life & performance of your outdoor power equipment.

• Country Of Origin: China
• Model Number: 705927
• Item Package Dimension: 3.88" L x 2.25" W x 2.75" H
• Item Package Weight: 0.99 lb

User questions & answers

Question:	Does this work with briggs and stratton model
Answer:	they make them in both countries.
Question:	Will this work on the Westinghouse I gen
Answer:	The quality is good, but it is not as good as what I bought in another place. I recommend it to you,link:bronaxshoes。com
Question:	It does not say float charger , It says d/c adapter, How do I know it is really a float charger and will shut off when battery is full
Answer:	On amazon. They have it all. You can go to a shoe store and see what you like and what feels good on your feet. But then purchase them on amazon. They are always less on amazon.
Question:	Is this a float charger or continuous charger
Answer:	Yes! I work in a warehouse and have P.F. And these are the only shoes that work and give me relief! I go thru about a new pair of shoes every 4-6 months! Always this brand!!