12 best fasco gas furnaces
Fasco is a well-known brand that manufactures various types of products, including gas furnace replacement parts and accessories. Fasco produces a range of components for heating and ventilation systems, including blower motors, draft inducers, and ignition components that are commonly used in gas furnaces.
These replacement parts and accessories play a crucial role in maintaining and repairing gas furnaces, ensuring they operate efficiently and safely.It's essential to use high-quality components like those produced by Fasco to ensure the longevity and performance of your gas furnace.
In the context of Outdoor Power Tools and Patio Lawn Garden, Fasco's products are not directly related, as their primary focus is on HVAC (Heating, Ventilation, and Air Conditioning) components, particularly those used in gas furnaces and similar heating systems.
Below you can find our editor's choice of the best fasco gas furnaces on the market
Fasco D701 5.6-Inch Direct Drive Blower Motor, 1/2 HP, 115 Volts, 1075 RPM, 4 Speed, 7.7 Amps, OAO Enclosure, Reversible Rotation, Sleeve Bearing
Fasco
Product description
PSC motor, ideal for blowers and fans used in furnaces and air-conditioners, all angle mount bearings, 1/2-Inch x 5-1/2-Inch shaft
- 1/2 HP
- 115 Volts
- 1075 RPM
User questions & answers
| Question: | I need a 5 speed 1/2 hp 115 vts, 1075 rpm do they have one |
| Answer: | No |
| Question: | Will this work as a replacement blower motor in my pac036h1021a complete package central airconditioning unit |
| Answer: | Yes this formula of Car Wash is biodegradable. |
| Question: | I'm replacing a 40year old single speed motor with a 5mf capacitor. will the 10mf capacitor used with this motor have any affect on the circuit board |
| Answer: | Most all soaps can be used if deluted correctly. The preferred soaps are specifically for pressure washers. With that said... I have used this soap (deluted) in my pressure washer - it's what I had on hand. It did not appear to effect the pressure washer. |
| Question: | Does the motor have a mounting ring similar to the ring on the shaft side of the motor on the back of the motor also? What diameter is the ring |
| Answer: | All of our products are made in the United States of America. |
Fasco Motors A225 Inducer Draft Motor
Fasco Motors
Product description
This is a genuine replacement part. The model number and name for the following item is: Fasco Motors A225 Inducer Draft Motor.
From the Manufacturer
This is a genuine replacement part. The model number and name for the following item is: Fasco Motors A225 Inducer Draft Motor
- Manufacturer Model A225
- Genuine Replacement Part
- Fasco Motors Item
- From The Brand Name: Fasco Motors
User questions & answers
| Question: | This product showed up un my fasco no. 7021-11577 search, is it capable |
| Answer: | Add recommended amount of Poly Soap (on bottle) to bucket of water ( I added a little extra). Used large soft wash brush on an extended handle. Spray entire RV with water (make it wet) Wash each section at one time , let it soak in and then spray with clean water (rinse). Use clean soft towel to wipe off water spots and excess water. I have a new fiber glass travel trailer that is parked in the sun for about half the day, then it's shaded. The product seemed to wash off the dirt very well and leave a waxy coating. I will use this product each time I need to wash the trailer. I will also need to use additional wax to protect the gel coat front cap from drying out. Very happy with this product so far, check back in two years. Cheers ! B. Bess |
| Question: | does this include the new gaskets |
| Answer: | It sure does! |
| Question: | will this work for 702113118C |
| Answer: | You just pour a bit into a bucket and mix with water for car wash soap/wax. Works very well! |
| Question: | Will this replace fasco |
| Answer: | Yes if you want to get all the dirt off. I use a nice microfiber "mop head" style mitt on a pole and scrub the car after using my foam cannon(found on Amazon). This and the fantastic pink wash and wax concentrate makes my car nice and clean with little effort. |
Fasco A200 Specific Purpose Blowers, Lennox 7002-2975, 31L5501
Fasco
Product description
1/30 HP, Shaded Pole, 115 Volts, 3000 RPM, 1 Speed, 2 Amps, CCW Rotation, Sleeve Bearing.
- Lennox
- 2 Amps
- 3000 RPM
- Country of Origin: China
User questions & answers
| Question: | Is this part compatible with lennox model g50uh-36a |
| Answer: | Not sure on ATV but works great on cars |
| Question: | what kind of silicone rubber tubing should I use to connect to the pressure switch? What will be the inside diameter of the rubber tubing |
| Answer: | I don;t see why not. You would get the best results by mixing a few cap fulls with warm to slightly hot water. Then rinse off with cold water. This really brings out the shine in the paint and looks as if you waxed your car. I never have to wax. This amazing product does both wash and wax in one step. Just use enough water so as not to over dilute the car wash liquid. |
| Question: | Will this fit a lennox g50uh 36b 090 05 the original motor is a fasco type u02b |
| Answer: | I haven't had any issues... Its quite normal to wash your windows just like going to a car wash. I hope this helps. |
| Question: | will this work with a ruud silhouette ugpj 07eauer? it looks identical |
| Answer: | No, you should buy real car wax if you want that freshly waxed shine. Dawn dish soap works better than this stuff. |
Fasco A229 Specific Purpose Blowers, York 7058-0267S, 17499
Fasco
Product description
1/25 HP, Shaded Pole, 115 Volts, 3000 RPM, 1 Speed, 1.8 Amps, CW Rotation, Ball Bearing.
- York
- 10.8 Amps
- 3000 RPM
User questions & answers
| Question: | What is the warranty on this product |
| Answer: | It's is a neutral PH, won't effect the wax on your car at all!!! I've washed my car 6-7 times with this stuff using a foam cannon and it hasn't effected the wax job on my car yet!!! |
| Question: | is this unit a replacement for the Fasco 70580267 inducer motor off a York Diamond 80 furnace |
| Answer: | Not than I’m aware of |
| Question: | If this is the unit to replace 70580267 then why is my motor ccw and this one is cw |
| Answer: | Yes |
A241 Weather King Furnace Draft Inducer / Exhaust Vent Venter Motor Fasco Replacement
Fasco A241 1-Speed 3200 RPM 1/25 HP Rheem Blower Motor (208/230V)
Product description
208/230 Volts 0.62 Amps 3200 Rpm CW Rotation Cross Reference: 70-23641-81, 7021-9567,7021-9137, Rheem-Ruud
- This is a Brand New Upgraded Furnace Inducer Motor
- The Inducer Motor expels the exhaust from the furnace.
Fasco A225 3.3" Frame Shaded Pole OEM Replacement Specific Purpose Blower with Ball Bearing, 1/15HP, 3200rpm, 115V, 60Hz, 2.25 amps
Fasco
Product description
Thermally protected. UL recognized; CSA or ULc certified. Clockwise shaft end rotation for gas or oil furnaces and heaters. 3200 rpm speed rating. 1/15 Horse power. 3.3" Diameter. 115 Volts. 2.25 amps. Speeds: 1. Ball Bearing. Cross reference information: OEM replacement for York #7021-11577, 17503, 7021-11830, 024-34558-000.
From the Manufacturer
For nearly a century, Fasco has been designing and manufacturing what has become the industry's most respected line of AC motors and blowers. Fasco A225 is a 115 Volt 3200 RPM Single Speed York Draft Inducer.
- Thermally protected
- UL recognized; CSA or ULc certified
- Clockwise shaft end rotation
- Specific purpose blower with Ball Bearing
- OEM replacement for York #7021-11577, 17503, 7021-11830, 024-34558-000
- 115 Volts, 3200 RPM, 2.25 Amps, Rotation: CW
- Shaded Pole Motor, Sleeve Bearing, Single Speed, No Centrifugal Switch
User questions & answers
| Question: | Does this come with the sensor |
| Answer: | The Fasco motor is a universal replacement motor for most all furnace/AC blower applications, You need to make sure you know what you are doing when you install the motor, it could be a little tricky. Make sure your connections are correct, and that you have the right motor size as to HP and dimensions. |
| Question: | What is the warranty on this part |
| Answer: | It shouldn't be a problem. The value isn't critical and the tolerances on those capacitors are very loose anyway. A 40-year-old unit likely had a +80% / -20% rating on that cap, so 5uF nominal would have been 4-9uF in real life. I wouldn't worry about it. |
| Question: | Does it come with the gasket |
| Answer: | yes, there are rubber mounting rings on both sides, I replaced a GE motor with similar dimensions and it works perfectly. |
| Question: | Is this just the motor; does it have the blower also |
| Answer: | Yes its soap. |
Fasco A150 Specific Purpose Blowers, Trane 7021-7833, 7021-8928
Fasco
Product description
Shaded Pole, 208-230 Volts, 3000 RPM, 1 Speed, 0.5 Amps, CCW Rotation.
- Trane
- 00.5 Amps
- 3000 RPM
User questions & answers
| Question: | is it a 230v counter clockwise |
| Answer: | If I recall, mine did not come with new gaskets so I ended up using RTV silicone. |
| Question: | Can i use this a150 to replace fasco |
| Answer: | No, this would not be a replacement for 702113118C |
| Question: | Is this correct inducer for model no. ycc030f1m0bj serial no. 3482sgr1h i believe it is blw00451. 208-230 volt. clockwise rotation when installed |
| Answer: | No the part A225 is not the replacement, the part RFB547 or A163 can replace this fasco 702112355. |
| Question: | Does this item include the associated gastet # GKT |
| Answer: | Check W W Granger Or Johnstone Supply. |
Fasco A241 3.3" Frame Shaded Pole OEM Replacement Specific Purpose Blower with Sleeve Bearing, 1/25HP, 3200rpm, 208-230 V, 60Hz, 0.62 amps
Fasco
Product description
Thermally protected. UL recognized; CSA or ULc certified. Clockwise shaft end rotation for gas or oil furnaces and heaters. 3200 rpm speed rating. 1/25 Horse power. 3.3" Diameter. 208-230 Volts. 0.62 amps. Speeds: 1. Sleeve Bearing. Cross reference information: OEM replacement for Rheem/Ruud #7021-9567, 70-23641-81.
- Thermally protected
- UL recognized; CSA or ULc certified
- Clockwise shaft end rotation
- Specific purpose blower with sleeve bearing
- OEM replacement for Rheem/Ruud #7021-9567, 70-23641-81
User questions & answers
| Question: | Does this model include 208-230 unbonded or does it require a neutral because our system is not bonded and can only work with the 2 wire model |
| Answer: | The tubing was sent with it when I bought it. |
| Question: | My 7021-9137 only has 2 black wires. The picture shows a total of 4 wires. Will it work |
| Answer: | Look at the EXISTING-on UR unit!- inducer for the named Part #! If it still visible! The one U R looking to purchase is-I am sure- has an AC motor. Not sure why Lennox would misdirect U (24w95) from buying an 'after market'-less expensive unit-as opposed to their high $$'s one?? I guess I can answer that Q--right?? If U R concerned--spend some time calling your local HVAC places-most of them are decent folks and will give you the correct replacement once U have given them the g40uh-36a-070-16 lennox furnace #! Do not forget to check the square tubing connecting the blower assy to the sensing switch. Make sure that the discharge port is at the 2 O'clock position! ALSO--U do realize that the whole assy is held in place by HIGH TEMP silicon adhesive! Get it B4 U start! |
| Question: | Does this come with the gasket as well |
| Answer: | Not sure. I have Lennox Furnace and this was a perfect fit. Still working great. |
| Question: | Where can you get gasket for a241 fasco draft inducer |
| Answer: | Yes, the Fasco Motor A225 can replace York 7021-11577, 7021-11577S, 7021-11830, 024-34558-000 AirXHeat Team |
Fasco A222 3.3" Frame Shaded Pole OEM Replacement Specific Purpose Blower with Ball Bearing, 1/35HP, 3000rpm, 115V, 60Hz, 1.05 amps
Fasco
Product description
Thermally protected. UL recognized; CSA or ULc certified. Counterclockwise shaft end rotation for gas or oil furnaces and heaters. 3000 rpm speed rating. 1/35 Horse power. 3.3" Diameter. 115 Volts. 1.05 amps. Speeds: 1. Ball Bearing. Cross reference information: OEM replacement for York #7021-8317, 026-32067-700, 7021-7481.
From the Manufacturer
For nearly a century, Fasco has been designing and manufacturing what has become the industry's most respected line of AC motors and blowers. Fasco A222 is a 115 Volt 3000 RPM Single Speed York Draft Inducer.
- Thermally protected
- UL recognized; CSA or ULc certified
- Counterclockwise shaft end rotation
- Specific purpose blower with Ball Bearing
- OEM replacement for York #7021-8317, 026-32067-700, 7021-7481
- 115 Volts, 3000 RPM, 1.05 Amps, Rotation: CCW
- Shaded Pole Motor, Ball Bearing, Single Speed, No Centrifugal Switch
User questions & answers
| Question: | Where can I buy a gasket |
| Answer: | yes |
Replacement for Jakel Furnace Vent Venter Exhaust Draft Inducer Motor J238-150-1533
Fasco
Product description
This is a Brand New Upgraded Furnace Inducer Motor
- This is a Brand New Upgraded Furnace Inducer Motor
- The Inducer Motor expels the exhaust from the furnace.
User questions & answers
| Question: | is this a replacement for a jakel model |
| Answer: | This is the complete blower and motor assembly. |
| Question: | I need to know if J238-153-15315 is a replacement motor for J |
| Answer: | Fasco motors come with a 1 year manufacturer's warranty. |
| Question: | what is the volt and amp rating on this inducer unit |
| Answer: | Yes, it is. It is very easy to replace and has been running very good so far. |
| Question: | is this the replacement for j |
| Answer: | The blower wheel may be different, blades going the other way for opposite rotation. Either way the outlet is the outlet for the exhaust |
Fasco A134 3.3" Frame Shaded Pole OEM Replacement Specific Purpose Blower with Sleeve Bearing, 1/25HP, 3060rpm, 115V, 60Hz, 1.5 amps
Fasco
Product description
Thermally protected. UL recognized; CSA or ULc certified. Clockwise shaft end rotation. Specific purpose blower with sleeve bearings. For gas or oil furnaces and heaters. 3060rpm Speed rating. 1/25 Horse power. 3.3" Diameter. 115 Volt. 1.5 amps. Sleeve bearing. Cross reference information: ICP 7021-9335, 7021-8735, 7021-9499, 7021-8736, 7021-7700.
From the Manufacturer
For nearly a century, Fasco has been designing and manufacturing what has become the industry's most respected line of AC motors and blowers. Fasco A134 115 Volt 3060 RPM Blower Assembly is a single speed motor for a High Efficiency Furnace.
- Thermally protected
- UL recognized; CSA or ULc certified
- Clockwise shaft end rotation
- Specific purpose blower with sleeve bearings
- OEM replacement for ICP 7021-9335, 7021-8735, 7021-9499, 7021-8736, 7021-7700
- 115 Volts, 3060 RPM, 1.5 Amps, Rotation: CWSE
- Shaded Pole Motor, Ball Bearing, Single Speed
User questions & answers
| Question: | will this fit |
| Answer: | Mine did not. I bought some high temperature rtv gasket maker which worked fine. |
| Question: | My 7021-9335 is type u21B, 1/25 ho, 115 volt hz60 amp1.5, 3000rpm |
| Answer: | No does not come with the sensor |
| Question: | Will this replace a Fasco 7021-8493, it looks the same but need to be sure |
| Answer: | These have a one year warranty for manufacturing defects. |
| Question: | Will this fan work with a right side exhaust? My furnace has the motor out and the exhaust going out on the right |
| Answer: | No, no gasket for between furnace and blower. Found mine local for $5 |
Fasco A172 Shaded Pole OEM Replacement Specific Purpose Blower with Ball Bearing, 1/35HP, 3000rpm, 115V, 60Hz, 1.6 amps
Fasco
Product description
Thermally protected. UL recognized; CSA or ULc certified. Clockwise shaft end rotation. Specific purpose blower with ball bearings. For gas or oil furnaces and heaters. 3000rpm Speed rating. 1/35 Horse power. 115 Volt. 1.6 amps. Ball bearing. Cross reference information: ICP 7002-2792, 1010975P, 7002-2633.
From the Manufacturer
For nearly a century, Fasco has been designing and manufacturing what has become the industry's most respected line of AC motors and blowers. Fasco A172 is a 1/35 HP 115 Volt 3000 RPM OEM Inter City Products Draft Inducer.
- Thermally protected
- UL recognized; CSA or ULc certified
- Clockwise shaft end rotation
- Specific purpose blower with ball bearings. Wheel size: 4-3/4 Inch x 1-5/8 Inch
- OEM replacement for ICP 7002-2792, 1010975P, 7002-2633
- 115 Volts, 3000 RPM, 1.6 Amps, 1/35 HP, Rotation: CW
- Shaded Pole, Ball Bearing
User questions & answers
| Question: | What is the difference of this one vs |
| Answer: | I am not sure where to get the gasket other then a dealer for the furnace. You could just run a light bead of silicone on the draft inducer, that would work fine. |
| Question: | Induction blower for Goodman model tg8s080b12mp11a |
| Answer: | I checked the box. It is 208-230 volts counter clockwise |
| Question: | Will this fasco a 172 fit keeprite dc80 gas furnace. model ntc 7075bfa3. the fan rotation look like ccw. thanks |
| Answer: | Must use OEM Trane part # D671914P01 |
| Question: | will this item fit into my HEIL furnace? the number 7002-2633 on the FASCO Label |
| Answer: | Yes it is I bought and installed it it's 230v with clockwise rotation |
Latest Reviews
View all
Window Cleaner For High Windows
- Updated: 03.03.2023
- Read reviews
Royal Canin Dog Food For Skin Allergies
- Updated: 25.05.2023
- Read reviews
Ancestry And Me
- Updated: 26.06.2023
- Read reviews
Winsome Coffee Tables
- Updated: 23.07.2023
- Read reviews
2 Stage Air Compressors
- Updated: 22.03.2023
- Read reviews