10 best chain for saw mills

Chain for saw mills is an essential component used in chainsaw mills, which are tools designed for turning logs into lumber or wooden boards. These chains are a critical part of the chainsaw mill setup and play a significant role in the milling process. Here's what you need to know about chain for saw mills:

  1. Type of Chain: Chainsaw mills typically use specialized chains that are designed for ripping through wood efficiently. These chains are different from regular chainsaw chains, as they have fewer teeth and are optimized for milling rather than cutting.

  2. Tooth Configuration: Chains for saw mills often have a skip-tooth or semi-skip-tooth configuration. This means that there is more space between the cutting teeth, allowing for efficient removal of sawdust and chips during the milling process.

  3. Gauge: The gauge of the chain refers to the thickness of the drive links, which determines how well it fits the bar. It's crucial to use a chain with the correct gauge for your chainsaw mill's bar to ensure proper operation.

  4. Length: The length of the chain should match the length of the bar on your chainsaw mill. Chainsaw mill bars come in various sizes, so it's important to select the appropriate chain length to ensure a snug fit.

  5. Maintenance: Chains for saw mills require regular maintenance, including sharpening the cutting teeth and properly tensioning the chain. Proper maintenance is crucial for maintaining cutting efficiency and prolonging the life of the chain.

  6. Material: Chains for saw mills are typically made from high-quality steel to withstand the demands of milling. They should be resistant to wear and capable of maintaining their sharpness over time.

  7. Safety: Using the right chain and maintaining it properly is essential for safety when operating a chainsaw mill.Dull or damaged chains can increase the risk of accidents, so it's important to inspect and maintain the chain regularly.

  8. Compatibility: Ensure that the chain you choose is compatible with your specific chainsaw mill model. Different chainsaw mills may have different requirements in terms of chain length, pitch, and gauge.

  9. Replacement: Chains for saw mills are subject to wear and tear, and they will eventually need to be replaced. Having spare chains on hand is a good practice to minimize downtime during milling operations.

  10. Quality: Investing in a high-quality chain for your saw mill is essential for achieving smooth and accurate cuts. Cheaper or lower-quality chains may not perform well and can result in rough or uneven lumber.

In summary, chain for saw mills is a specialized component used in chainsaw milling, designed to efficiently convert logs into lumber. Choosing the right chain, maintaining it properly, and ensuring compatibility with your chainsaw mill are all essential aspects of achieving successful milling operations.

Below you can find our editor's choice of the best chain for saw mills on the market
  

POCREATION Chainsaw Mill Planking Milling 14" to 48" Guide Bar Wood Lumber Cutting Portable Sawmill Iron Alloy and Galvanize Chainsaw Mill for Builders

Product description

Specification:

Condition: 100% Brand New

Item Type: Chainsaw Mill

Material: Iron Alloy + Galvanize

Color: Silver

Application: Suitable for chain saw with bar length 35.6-121.8cm / 14-48in

PProduct Size: Approx. 126 x 31.5 x 47.5 cm / 49.6 x 12.4 x 18.7 in

Weight: Approx. 8800g / 310.4oz



Package List:

2 x Long Slide1 x Short Slide1 x Saw Board Pressing Block1 x T Shape Ruler1 x Arc Sawing Board Pressing Block1 x Arc T Shape Ruler1 x Handle Mounting Plate1 x Round Tube Slide1 x Acrylic Board1 Bag x Screw Accessories2 x Aluminum Casting Accessory1 x Chainsaw Protective Cover1 x Handle1 Pair x Gloves1 x Tool Bag1 x Lune Shape Accessory1 x Sleeve Wrench1 x Hex Wrench1 x Installation Instruction

  • 【Nice Tool】Perfect for builders, woodworkers, arpenters & outdoor enthusiasts.It can be used to cut plates and wood, and is a practical woodworking tool.
  • 【Easy to Assemble】Complete accessories, simple installation, suitable for chain saws with bar length 35.6*121.8cm / 14*48in.
  • 【Premium Quality】Made of high-hardness iron alloy material, strong and durable, wear-resistant. The surface is galvanized, resistant to corrosion and not easy to oxidize and rust.
  • 【Adjustable Chainsaw Mill】Planking milling height and width are adjustable, easy to install, and can be directly connected to your chainsaw.
  • 【Customer Service】Except the premium product we provide, we also provide considerate after sale service. If you encounter any problems with our dressing table stool, please contact us immediately by email. We will provide a friendly customer service ASAP within 24 hours.

Harvest Your Own Lumber: How to Fell, Saw, Dry and Mill Wood

Linden Publishing

Based on 183 reviews Check latest price

Haddon Lumbermaker

Haddon Lumbermaker

Based on 196 reviews Check latest price

Product description

The HADDON LUMBERMAKER is a chain saw accessory that allows you to make your own valuable lumber for a fraction of the regular cost! It attaches to any chain saw in minutes and guides your saw in a straight line using a guide board, 2x4 or 2x6, allowing you to cut any size lumber right where the tree falls.

  • Cut any size lumber you need right where the tree falls, use for a cut off saw,
  • Make boards, beams, planks, and more with your chain saw and this inexpensive tool!
  • The HADDON LUMBERMAKER fits all chain saws, & attaches to the bar in seconds.
  • MADE IN THE USA, includes 30 page "how to" owners manual, fits 2x4 or 2x6 guide board
  • Works with regular chain, saw swivels for PLUNG cuts, has a LIFETIME GUARANTEE!!!

User questions & answers

Question: will my stihl farm boss work with this mill
Answer: I've used my Stihl 066 Magnum and Stihl 441C to halve BIG logs (36 and 20 inch bars respectively) to halve huge logs. You want POWER and very sharp chains. I use star drive wood screws to attach flat strap steel (I used free concrete form straps) to the plank guide, and to the trunk for alignment. Just bend the mild steel straps to get everything aligned, and go for it. Be sure not to hit dirt, you can always trim off an inch of rough stuff where it finally splits. That OR roll the log onto pallets or small trunk pieces to get it off the ground
Question: Any recommendations on this vs a typical alaskan or granberg mill
Answer: The hadden is designed to use your saw vertically along a 2x4 or 2x6, the Granberg uses your saw horizontally. This Hadden is a simple tool that is only accurate with extreme care by the user. It works mostly to flat cut a side of a log. It is not practical for cutting planks or slabs unless you have very large logs. If you use the hadden, you need to aquire a small level to attach to the top of the tool to keep your saw vertical or your cuts will wind back and forth. I also stongly suggest using the 2x6 and not the 2 x 4 which does not offer enough flat surface to stay level.
Question: Is it possible to split the log down the middle
Answer: I would (wood) say 20 inches.
Question: What is the difference between this mill and Granberg? http://smile.amazon.com/dp/B002VA3G3A
Answer: if your saw has a table with a standard slot, this will fit.

OREGON 72RD072G 72 Drive Link 3/8-Inch Ripping Saw Chain Standard Sequence

Based on 199 reviews Check latest price

Product description

OREGON 72, 73, 75RD specialty 3/8-Inch ripping chains feature a special factory grind for making dimensional boards and planks from larger timbers by -Inchripping-Inch (cutting parallel to the wood grain). Recommended Saw Size: For ripping cuts only. Do not use these chains for any type of cutting other than ripping. WARNING: OREGON72, 73, 75RD chain may be capable of kickback that could result in serious injury to the saw operator or bystanders. Although these chains have features designed to reduce kickback energies, these are NOT low-kickback chains. Do not use this saw chain unless you have experience and specialized training for dealing with kickback. Saw chain with lower kickback potential is available.

  • 72rd: 3/8-inch pitch, 050-inch gauge
  • Standard chassis and cutter parts are used; cutter grind is the only difference from standard chains
  • For use on chain-type sawmills; not recommended for hand-held use
  • LubriLink tie straps help keep oil where it's needed - on the chain
  • Vibe-ban chassis design reduces vibration 25% or more at the handles

User questions & answers

Question: What oregon bar goes good w this chain? Please be specific
Answer: I love them
Question: is this a ripping chain? it looks like a standard chain
Answer: Yes 2 speakers
Question: Will this fit on a 20 inch echo timberwolf
Answer: You can return for 30 days or even 45 days
Question: The remington rm5118 uses the h72 . what is the compatible ripping chain? or is there a 20" oregon bar that works for this saw and 20" ripping chain
Answer: In the box it was included the product with the charger and earphones. Additionally, it can with the travel adapter.

Oregon 72RD105G 105 Drive Link 3/8-Inch Ripping Chain, Standard Sequence

Based on 29 reviews Check latest price

Product description

OREGON 72, 73, 75RD specialty 3/8" ripping chains feature a special factory grind for making dimensional boards and planks from larger timbers by "ripping" (cutting parallel to the wood grain). Recommended Saw Size: For ripping cuts only. Do not use these chains for any type of cutting other than ripping. WARNING: OREGON72, 73, 75RD chain may be capable of kickback that could result in serious injury to the saw operator or bystanders. Although these chains have features designed to reduce kickback energies, these are NOT low-kickback chains. Do not use this saw chain unless you have experience and specialized training for dealing with kickback. Saw chain with lower kickback potential is available.

  • 72RD: 3/8" pitch, .050" gauge
  • Standard chassis and cutter parts are used; cutter grind is the only difference from standard chains
  • For use on chain-type sawmills; not recommended for hand-held use
  • LubriLink tie straps help keep oil where it's needed - on the chain
  • Vibe-Ban chassis design reduces vibration 25-percent or more at the handles

User questions & answers

Question: I would like a ripping chain that fits my still 16 inch bar and my Stihl 28 inch bar
Answer: This product must meet certain flame retardant standards.
Question: What size of bar does this fit
Answer: They fold flat only
Question: Can I use a standard round file to hand sharpen this chain? The ‘special factory grind’ has me confused
Answer: Sorry no case with these but they are durable and fold flat
Question: I have a 27 inch bar 3/8 pitch what ripping chain will fit on it it is an echo can-620pw
Answer: These are GREAT Bluetooth headsets but they are not a replacement to a HA-SZ2000. HA-SZ2000 is a Japan wired headset import and do not have a warranty in the US

Oregon R45 AdvanceCut Chainsaw Chain for 12-Inch Bars, Fits Dewalt, Craftsman, Husqvarna, Ryobi, Black & Decker, 45 Drive Links

Oregon

Based on 1 reviews Check latest price

Product description

The Oregon R45 AdvanceCut Saw Chain is a 12", 3/8" pitch chain that is ideal for landscapers and homeowners using small, low powered saws. The .043" gauge narrow kerf cutting systems increase efficiency since they need less power from the saw than standard cutting systems. The following list of saw models is not comprehensive. To ensure you are ordering the correct part you may contact Oregon Customer Support. Fits many chainsaw models, including but not limited to the following: Black & Decker LCS1240 40-Volt, Husqvarna - 436 LI, Husqvarna - 536 LiXP, Craftsman - 98023, Husqvarna - T536 LiXP, Ryobi - RY40500, Dewalt - DCCS620B, DCCS620P1, Makita - XCU03, Makita - XCU02, Makita - EA3200SRBB, Ryobi - P548, Echo - PPT-2620, Echo - PPT-2620H, Echo - PPF-2620, Echo - CS-330T.

  • Fits several chainsaw models from Dewalt, Craftsman, Husqvarna, Ryobi, Echo, Black & Decker and others that have a 12” bar. See back of packaging and product description for list of models.
  • Ideal for DIY homeowners – Capable of handling tough jobs; Ideal for home yard work and cutting storm damaged trees; Cuts smoothly, semi-chisel chain is more tolerant of dust and dirt; Engineered for safety, meets UL and ANSI low kickback requirements
  • Automatic oiling for longer lasting chain – Oregon’s LubriTec oiling system is designed to deliver the best possible lubrication for your chain so you can work smarter and your saw lasts longer
  • Your chain stays sharper, longer. All Oregon chain cutters have an outer layer of industrial chrome for a harder surface; Hardened rivets create a high-quality, load-bearing surface for reduced wear, increased strength and fewer tension adjustments
  • Chain is for 12-Inch chainsaw bars. Pitch: 3/8" Low Profile, Gauge: .043", Drive Link Count: 45.

User questions & answers

Question: Fit 12" Chicago Electric electric pole saw
Answer: We'll need a little more information, such as the model number of your 12" Chicago Electric pole saw, to confirm the right chain. Please contact Oregon Technical Services at 1-800-223-5168 option #1 for clarification.
Question: Our Dewalt chain saw dccs620 says that it uses a replacement chain 90586162. Will this work
Answer: Yes, this is the correct one. You don't want the S45 as it is 0.05 width vs. the R45 @ 0.043 (dimensions shown on front of packaging)
Question: Is this chain compatible for the craftsman 40v mac lithium chain saw model
Answer: The R45 is recommended for this Craftsman model. You can contact Technical Services at 800-223-5168 option '1' for questions. Thank you.
Question: Is this the proper replacement chain for the Dewalt 12 inch 20 v brushless chainsaw
Answer: Yes, I bought this chain several weeks ago and it was a perfect replacement for the new dewalt 20v max brushless chainsaw.

Product features

Oregon AdvanceCut Chainsaw Chain

Homeowners need a chainsaw within arm's reach for occasional yardwork and even storm-damaged trees. You also need a saw chain advanced enough to tackle tough jobs, but user-friendly enough and forgiving for occasional use.

Oregon's AdvanceCut was created for 'DIY' homeowners because of its solid performance and reliable durability.

Low kickback design makes AdvanceCut an ideal - and dependable - choice for maintaining your property's trees. AdvanceCut is an essential tool for the discerning homeowner.

Lubritec Oiling System

You want tools to work smarter and last longer. We designed LubriTec to deliver the best possible lubrication for your saw chain. Keeping lubrication where it’s needed most means a longer lasting saw chain and guide bar and less down time.

Low Vibration

Less vibration equals more comfort. We wanted to lessen vibration-induced white finger (VWF), so we created a small space between the saw chain and the guide bar. A lot of the energy gets dissipated by the saw chain, acting as a shock absorber. It never reaches the guide bar, the saw - or most important - the operator. Our low vibration design reduces vibrations by 25% or more.

Chrome-Plated Cutters

Your chain stays sharper, longer. Oregon electroplates a layer of industrial hard chrome to all our saw chain cutters. Chrome delivers a harder surface and better wear resistance. So you spend more time cutting and less time filing or grinding the chain.

Hardened Rivets

For a longer working saw chain, Oregon induction hardens and quenches all saw chain rivets, delivering a high-quality, load-bearing surface that resists wear and improves strength. Less wear and chain stretch means fewer chain tension adjustments.

Granberg EZ Rail Mill Guide System - 10 FT - Model G1010

Based on 15 reviews Check latest price

Product description

Aircraft-grade aluminum rails provide a stable surface that attaches in seconds and is easily leveled left to right, front and back. Cross members are adjustable along whole length of the EZ rails. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • The best way to make a perfect first cut with a Granberg Mill, now even better!
  • Comes in two 5′ sections. Makes for easy transport and increased versatility.
  • Design upgrades include: Longer rail system for the same price. Single piece dog hinge plate for easier assembly.Four cross members for added stability.
  • Can be used with any horizontally-oriented mill. Larger crossbars available for logs that are greater than four feet in diameter.
  • Hammer in dogs attached to cross members, set levels using a screwdriver or drill, then start milling

User questions & answers

Question: Does this come with the Rail connectors to assemble the two five foot peices together
Answer: Does not come with a larger plug. You can purchase the adapter from any electronics store I believe it's just a simple headphone to auxiliary adapter but I could be mistaken
Question: Is this more stable than the cheaper brands
Answer: It really works best for my baby. I guess any brand of car seat you have would fit because all you have to do is adjust the strap and snap it so it'll stay. Its good because it really helps a lot supporting my baby's head. I didn't used the small though coz she's 4and half months already.
Question: Hi Can the rails be used separately for logs which are less than 5 feet
Answer: The single one has one only for newnorn or it can be the one that only has one set of the newnorn and toddler head rest.
Question: will it work with a Granberg g
Answer: Hello, please check with Chicco if this is allowed with their products. Generally, the Chicco Keyfit comes with an infant insert.

Oregon R56 AdvanceCut Chainsaw Chain for 16-Inch Bars, Fits Husqvarna, Poulan, Echo, DeWalt, 56 Drive Links

Oregon

Based on 1 reviews Check latest price

Product description

Oregon 90PX chain offers higher chain efficiency, ideal for small, low powered saws great for landscapers and homeowners. The .043" gauge narrow kerf cutting systems increase efficiency. They need less power from the saw than standard cutting systems. Fits several chainsaw models, including but not limited to: Poulan ES300, ES350, PRCS16i; Makita DUC400, EA3200S, EA3201S, EA3500S, EA3500SRDB, EA3501S, XCU03, XCU04, XCU09; Echo CCS-58V, CCS-58V2AHCV, CCS-58V4AH, CS-330T; EGO CS1600 56V Lithium-Ion, CS1604 56V Lithium-Ion; Greenworks 20152 DigiPro 40V, 20312 Digipro G-Max 40V, 20322 Digipro G-Max 40V, 40V G-Max DigiPro Brushless, GS180 2001902; Craftsman CMCCS660, CMCCS660E1; DeWalt DCC690M1, DCCS670T1, DCCS670X1, DCCS690, DCCS690B, DCCS690H1, DCCS690M1, DCCS690X1, DCCS69B; Milwaukee 2727-20, 2727-21hd, M18; Jonesered CS16i.

From the Manufacturer

Oregon R56 16 inch saw chain fits on 16 in Micro-Lite bars. Micro-Lite narrow kerf cutting systems remove less wood fiber when cutting so they require less power than standard cutting attachments to make the same length of cut. Micro-Lite is a system, involving both a specialized chain and a specialized bar. A Micro-Lite chain must always be used with a Micro-Lite bar in order to obtain all the advantages of narrow kerf cutting. To find the correct replacement parts and accessories for your chainsaw go to www.oregonchain.com.

  • Fits several chainsaw models from Echo, Husqvarna, Poulan, Greenworks, DeWalt, Makita, and others that have a 16” bar. See back of packaging and product description for list of models.
  • Ideal for DIY homeowners – Capable of handling tough jobs; Ideal for home yard work and cutting storm damaged trees; Cuts smoothly, semi-chisel chain is more tolerant of dust and dirt; Engineered for safety, meets UL and ANSI low kickback requirements
  • Automatic oiling for longer lasting chain – Oregon’s LubriTec oiling system is designed to deliver the best possible lubrication for your chain so you can work smarter and your saw lasts longer
  • Your chain stays sharper, longer. All Oregon chain cutters have an outer layer of industrial chrome for a harder surface; Hardened rivets create a high-quality, load-bearing surface for reduced wear, increased strength and fewer tension adjustments
  • Chain is for 16-Inch chainsaw bars. Pitch: 3/8" Low Profile, Gauge: .043", Drive Link Count: 56.
  • Precision cutting chain, heat-treated, and hard-chromed cutter chain
  • Unique cutter design cuts smooth and fast with minimum kickback

User questions & answers

Question: Will this fit my shainsaw salem master 5820g 58cc
Answer: The oregon chainsaw website will list all compatible chainsaws.
Question: how many actual cutters are on the chain? oregon S
Answer: Thank you for contacting Oregon AM. There are 28 cutters in the loop of R56. Please contact Oregon Technical Services direct at 1-800-223-5168, option #1 if you have further questions.
Question: Will this fit a Husqvarna
Answer: It will fit a 440, 440E and 450 if they use a 16" bar.. I don't know the specs on a 445, but if it takes a 0.325-0.050 chain, then yes.
Question: Will this chain fit the new Milwaukee m18 chainsaw
Answer: This chain fits a 16" bar that has a 3/8 pitch, 0.043 chain gauge and has 56 drive links. Your product manual should tell you or it may be listed on your chain as to the size it takes.

Product features

Oregon AdvanceCut Chainsaw Chain

Homeowners need a chainsaw within arm's reach for occasional yardwork and even storm-damaged trees. You also need a saw chain advanced enough to tackle tough jobs, but user-friendly enough and forgiving for occasional use.

Oregon's AdvanceCut was created for 'DIY' homeowners because of its solid performance and reliable durability.

Low kickback design makes AdvanceCut an ideal - and dependable - choice for maintaining your property's trees. AdvanceCut is an essential tool for the discerning homeowner.

Lubritec Oiling System

You want tools to work smarter and last longer. We designed LubriTec to deliver the best possible lubrication for your saw chain. Keeping lubrication where it’s needed most means a longer lasting saw chain and guide bar and less down time.

Low Vibration

Less vibration equals more comfort. We wanted to lessen vibration-induced white finger (VWF), so we created a small space between the saw chain and the guide bar. A lot of the energy gets dissipated by the saw chain, acting as a shock absorber. It never reaches the guide bar, the saw - or most important - the operator. Our low vibration design reduces vibrations by 25% or more.

Chrome-Plated Cutters

Your chain stays sharper, longer. Oregon electroplates a layer of industrial hard chrome to all our saw chain cutters. Chrome delivers a harder surface and better wear resistance. So you spend more time cutting and less time filing or grinding the chain.

Hardened Rivets

For a longer working saw chain, Oregon induction hardens and quenches all saw chain rivets, delivering a high-quality, load-bearing surface that resists wear and improves strength. Less wear and chain stretch means fewer chain tension adjustments.

Oregon D72 AdvanceCut Chainsaw Chain for 20-Inch Bar; Fits Stihl 026, 029, MS 290, MS 291, MS 391, Husqvarna 55 Rancher, 455 Rancher, 460 Rancher, 372XP & More, 72 Drive Links

Oregon

Based on 1 reviews Check latest price

Product description

Oregon D72 advanced 20" Chainsaw chain, fits Husqvarna, Remington, Makita, Stihl & others

From the Manufacturer

Oregon D72 20 inch Vanguard Chain Saw Chain that fits on a 20 in. bar is simply the best 3/8 in. pitch cutting chain we've ever made for arborists, commercial cutters, farmers, and loggers who want exceptional safety in a high-performance chain. This fine tuned product is certified by Underwriters Laboratories to be an ANSI complying low kickback chain. Fits Cub Cadet, Husqvarna, Poulan, Stihl #D72.

  • Fits several chainsaw models including but not limited to: 【Stihl】026, 028, 029, 046 Magnum, MS 260, MS 260 Pro, MS 261, MS 290, MS 291, MS 310, MS 311, MS 361, MS 362, MS 362 C-M, MS 441, MS 391, MS 440, MS 460, MS 461
  • Also fits 【Husqvarna】55 Rancher, 61, 261, 272, 357XP, 359, 365, 395XP, 455 Rancher, 460 Rancher, 555, 560XP, 562XP, 570, 575XP, 576XP; See image of back of package for a list of saw models this chain fits
  • Ideal for DIY homeowners – Capable of handling tough jobs; Ideal for home yard work and cutting storm damaged trees; Cuts smoothly, semi-chisel chain is more tolerant of dust and dirt; Engineered for safety, meets UL and ANSI low kickback requirements
  • Automatic oiling for longer lasting chain – LubriTec is designed to deliver the best possible lubrication for your chain so you can work smarter and your saw lasts longer
  • Your chain stays sharper longer. All Oregon chain cutters have an outer layer of industrial chrome for a harder surface; Hardened rivets create a high-quality, load-bearing surface for reduced wear, increased strength and fewer tension adjustments

User questions & answers

Question: Will this fit a Stihl 041 20 inch bar
Answer: Yes
Question: Will this fit a timberpro
Answer: This Oregon D72 chainsaw chain would not be compatible with a Timberpro chainsaw.
Question: Will this fit on a Ryobi 20in 50cc chainsaw
Answer: Hello Joe and thank you for contacting Oregon. Our data indicates that Oregon part number D72 is the incorrect part number for your Ryobi RY5020. The correct Oregon part number for your saw is Oregon H78. Please contact one of our friendly Oregon Technical Services experts directly at 1-800-223-5168, option #1 if you have further questions.
Question: Will this fit the 20in Garwinner saw
Answer: Not sure about that one

Product features

Oregon AdvanceCut Chainsaw Chain

Homeowners need a chainsaw within arm's reach for occasional yardwork and even storm-damaged trees. You also need a saw chain advanced enough to tackle tough jobs, but user-friendly enough and forgiving for occasional use.

Oregon's AdvanceCut was created for "DIY" homeowners because of its solid performance and reliable durability.

Low kickback design makes AdvanceCut an ideal - and dependable - choice for maintaining your property's trees. AdvanceCut is an essential tool for the discerning homeowner.

Lubritec Oiling System

You want tools to work smarter and last longer. We designed LubriTec to deliver the best possible lubrication for your saw chain. Keeping lubrication where it’s needed most means a longer lasting saw chain and guide bar and less down time.

Low Vibration

Less vibration equals more comfort. We wanted to lessen vibration-induced white finger (VWF), so we created a small space between the saw chain and the guide bar. A lot of the energy gets dissipated by the saw chain, acting as a shock absorber. It never reaches the guide bar, the saw - or most important - the operator. Our low vibration design reduces vibrations by 25% or more.

Chrome-Plated Cutters

Your chain stays sharper, longer. Oregon electroplates a layer of industrial hard chrome to all our saw chain cutters. Chrome delivers a harder surface and better wear resistance. So you spend more time cutting and less time filing or grinding the chain.

Hardened Rivets

For a longer working saw chain, Oregon induction hardens and quenches all saw chain rivets, delivering a high-quality, load-bearing surface that resists wear and improves strength. Less wear and chain stretch means fewer chain tension adjustments.

Oregon 240RNDD009 .050" Gauge 3/8" Pitch 24" Power Match Bar,White

Based on 131 reviews Check latest price

Product description

Oregon Power Match Bars are the industry standard for professional users cutting clean wood. Super-tough chrome-moly steel provides superior bar-body strength and tough rails with excellent resistance to wear and chipping. The Power Match bars nose fastens with a single rivet and are securely held by wide, strong, overlapping ears. The long nose takes most of the abuse to minimize wear to the body of the bar. Power Match bars are recommended for 3.5 cu. in (58 cc) and larger saws.

  • 24" bar length - .050" Gauge - 3/8" Pitch - 11 Tooth Count
  • This Professional bar is perfect for Big-timber Loggers, Pulpwood Loggers and Forest Fire Fighters
  • Bar Mount used on Delmar, Husqvarna, Conserved, Makita, Partner, Shindaiwa, Solo saws
  • Replaceable sprocket-nose

User questions & answers

Question: Will this bar fit a jonsered
Answer: Some more information:Here's some important information regarding your Sony 950BT. Pairing has a bit of a trick to it, so just in case you have a problem, here's the solution:1. Make sure that BT is in fact turned “on" on your PC or BT Device. When you're in your BT settings make sure that the PC BT Device is searching or is "discoverable.”2. Make sure that the headphone is OFF3. Place your headphones within 1 meter (3 feet) of your PC/Device4. Press and hold the POWER button for about 7 seconds, until the indicator flashes blue and red alternately and then you can release the POWER button5. Now in the list of detected devices on the BLUETOOTH panel on your PC/Device, you should see "MDR-X950BT.” 6. Select “MDR-XB950BT” (IF a passkey input is required, input “0000.”)Note: Things that can influence BT performance: proximity to any source of radio interference like your internet router, microwave or wireless landline telephones.These tips will solve any problem you may have.
Question: Will this bar fit a Stihl
Answer: I used mine only for music until your question remind me of this potential problem. I just tested it. Well, it does have lip-sync issues first for ipad, for my case, around 0.5~1 second. But I don't see such problem when using it with my laptop. Then I switched back to ipad, the issue is gone. Guess it was the network problem first?? Wired... but now I don't see the issues anymore.
Question: I ordered a power match 24” 50 gauge 240rndd009 but received a powerCut 24” bar. Are they the same quality? If not, what is the difference
Answer: cord is 50 inches from where it connects to the headphones to where it plugs into the headphone jack.
Question: I want to put a 24 inch bar on my 455 rancher, what type of bar and chain do I want
Answer: Don't remember model #, but would not recommend these. Very flat sounding. My advice is to spend a little more on something nicer. I used them once since I bought them then retired them to my junk drawer.

Product features

Oregon PowerCut Guide Bars

Oregon’s PowerCut is the ultimate guide bar for loggers and tree care professionals. Full chisel cutter saw chain powers through timber with speed, efficiency, and precision. Chrome-moly steel means reduced wear for a longer-lasting guide bar.

PowerCut guide bars are strong, durable, light-weight, and long-lasting. The chrome-moly body is super-tough, and the replaceable nose promotes a long lifespan. PowerCut guide bars pair perfectly with the 70-Series EXL saw chain.

Latest Reviews

View all