10 best carburetor of chainsaws

A carburetor is a critical component in chainsaws, helping to mix air and fuel in the right proportions for combustion. It plays a crucial role in the proper functioning of the chainsaw engine.Here's what you need to know about the carburetor of chainsaws:

  1. Function: The carburetor is responsible for mixing air and gasoline in the correct ratio to create a combustible mixture for the engine. This mixture is essential for the chainsaw to generate power and run smoothly.

  2. Components: A typical chainsaw carburetor consists of several components, including a throttle valve, a venturi tube, a float chamber, a fuel jet, and an idle mixture screw. These components work together to regulate the flow of air and fuel into the engine.

  3. Adjustment: Chainsaw carburetors are adjustable to ensure proper engine performance. Users can fine-tune the carburetor by adjusting the idle speed, high-speed fuel mixture, and low-speed fuel mixture. Correct adjustment is crucial for optimal performance and fuel efficiency.

  4. Cleaning and Maintenance: Regular maintenance of the carburetor is essential for the chainsaw's longevity. Over time, dirt, debris, and varnish can accumulate in the carburetor, affecting its performance. Cleaning or rebuilding the carburetor may be necessary to keep the chainsaw running smoothly.

  5. Fuel Quality: The quality of fuel used in a chainsaw can impact the carburetor's performance. Using stale or contaminated fuel can lead to carburetor problems. It's essential to use the recommended fuel mixture and store fuel properly.

  6. Symptoms of Carburetor Issues: When the carburetor is not functioning correctly, you may notice symptoms like rough idling, poor acceleration, stalling, or reduced power output. These issues can often be traced back to carburetor problems.

  7. Replacement: In some cases, a chainsaw's carburetor may become damaged or wear out over time. If cleaning and adjustment do not resolve performance issues, it may be necessary to replace the carburetor with a new one. It's important to choose a compatible carburetor for your chainsaw model.

  8. Safety: When working on the carburetor or any part of the chainsaw, always follow safety guidelines and use appropriate safety gear. Disconnect the spark plug wire to prevent accidental starts, and be cautious when handling fuel and flammable materials.

In conclusion, the carburetor is a vital component of a chainsaw's engine, responsible for mixing air and fuel to ensure proper combustion and engine performance. Regular maintenance, adjustment, and the use of high-quality fuel are essential for keeping the carburetor and the chainsaw in good working condition.

Below you can find our editor's choice of the best carburetor of chainsaws on the market
  

Savior 573952201 PP5020AV Carburetor for Zama C1M-W47 Poulan Pro PP5020 PP5020AVX 2 Stroke PP4818A Gas Chainsaw Parts 573 95 22-01 Craftsman 358.350980 358.350981 358.350982

Based on 7 reviews Check latest price

Product description

Carburetor Replace for Poulan Craftsman 573952201 / 573 95 22-01, Zama C1M-W47

For Poulan:

PP5020AV 2 Stroke Gas Chainsaw

PP5020AV 2 Stroke Gas Chainsaw

PP4818A Chain Saw

PP4818A Chain Saw

For Craftsman:

358350981 Chainsaw

358350981 Chainsaw

358350980 Chainsaw

358350980 Chainsaw

358350982 Gas Chain Saw

358350982 Gas Chain Saw

  • Carburetor Replacement for Poulan Craftsman 573952201 / 573 95 22-01, Zama C1M-W47 carburetor
  • For Poulan Pro PP5020AV PP5020 PP5020AVX Chainsaw; For Poulan PP4818A 2 Stroke Gas Chainsaw
  • For Craftsman 358.350980 358.350981 358.350982 Chainsaw Parts
  • 575296301 Air Filter fits for Specific Poulan PP5020AV & Craftsman Models.For Poulan Pro PP5020AV PP4818AV 50cc Craftsman 358.350980, 358.350981, 358.350982 Chainsaw Poulan PP5020AV Air Filter
  • Package:: 1 carburetor, 1 air filter, 2 gasket, 2 primer bulb, 1 spark plug, 1 fuel filter, 2 fuel line, 1 carb adjustment tool

Harbot WTA-29 Carburetor with for 455 Rancher 455 E 460 461 Gas Chainsaw with Air Filter Tune up Kit

Harbot

Based on 205 reviews Check latest price

Product description

Compatible with:

455 E Chainsaw (2009-10)455 E Chainsaw (2001-13)

455 RANCHER Chainsaw (2009-10)

455 RANCHER Chainsaw (2001-11)

455 RANCHER Chainsaw (2001-13)

460 Chainsaw (2009-10)

460 Chainsaw (2001-13)

461 Chainsaw (2001-13)

460 (2011-01) Rancher Chainsaw

Replace OEM Parts No.:

544883001

544 22 74-01

544 31 29-01

544 88 30-01

544 88 83-01

Replaces WTA-29 WTEA-1-1

Replaces C1M-EL35

  • Package include: 1 carburetor, 1 air filter, 2 carb mounting gaskets, 2 fuel line, 1 primer bulb, 2 fuel filter, 1 spark plug.
  • Yellow fuel line size:ID x OD :1/8'' x 3/16''-2 feet long.
  • Carburetor replaces for 544883001 ,544 88 83-01,544 22 74-01,544 31 29-01,544 88 30-01 ,WTA-29 ,WTEA-1 ,WTEA-1-1, C1M-EL35
  • Air filter replaces for 537255701
  • Fitment models: 455E 455 Rancher 460 Rancher 461 gas chainsaw

Panari 503283208 Carburetor for 340 340E 340EPA 345 345E 345EPA 346XP 350 350EPA 351 353 353EPA 354EPA Chainsaw Zama C3-EL18

Based on 63 reviews Check latest price

Product description



340 (2001-09) Chainsaw

340 (2004-03) Chainsaw

340 (2005-05) Chainsaw

340 (2006-06) Chainsaw

340 (2007-01) Chainsaw

340 E (2006-06) Chainsaw

340 EPA (1999-09) Chainsaw

340 EPA (2003-01) Chainsaw

340 EPA (2004-03) Chainsaw

345 (2001-09) Chainsaw

345 (2004-03) Chainsaw

345 E (2006-06) Chainsaw

345 EPA (2003-01) Chainsaw

345 EPA (2004-03) Chainsaw

346 XP (1999-01) Chainsaw

346 XP (2001-06) Chainsaw

346 XP (2003-06) Chainsaw

346 XP (2004-03) Chainsaw

346 XP (2007-02) Chainsaw

346 XP EPA (2004-03) Chainsaw

350 (1998-02) Chainsaw

350 (2001-09) Chainsaw

350 (2004-03) Chainsaw

350 (2006-06) Chainsaw

350 EPA (2006-06) Chainsaw

350 EPA (1999-09) Chainsaw

350 EPA (2003-01) Chainsaw

350 EPA (2004-03) Chainsaw

351 (2001-06) Chainsaw

351 EPA (1999-09) Chainsaw

353 (2004-03) Chainsaw

353 (2007-02) Chainsaw

353 EPA (2004-03) Chainsaw

353 EPA I (2002-09) Chainsaw

345EPA (1999-09) Chainsaw

  • Fit 340 340E 340EPA 345 345E 345EPA 346XP 346EPA 350 350EPA 351 353 351EPA I 353EPA chainsaw
  • Replace # ZAMA # C3-EL42
  • Replace # 503967601, 503 96 76-01, 503283208, 503 28 32-08,
  • You will get : 1 carburetor,1 fuel filter, 1 spark plug,1 gasket,2 fuel line
  • Note:There are 2 types of carburetors for these models, our carb only has one nipple, it doesn't fit the carb with two nipples

Savior C1U-W8 C1U-W14 Carburetor with Gaskets for Poulan 1950 2050 2150 2250 2375 2550 Craftsman Chainsaw Replace WT-89 WT-600 WT-624 WT-625 WT-891 Carb 545081885 530069703

Based on 378 reviews Check latest price
  • For Poulan 1950 2050 2150 2250 2375 2550 Chainsaw
  • Fits C1U-W8 C1U-W14 WT-89 WT-600 WT-624 WT-625 WT-891
  • Replace number: 545081885 530069703
  • Package include: 1pc carburetor + 2pcs gasket + 1pc primer bulb + 2 feets 6616 fuel line + 2 feets 6617 fuel line + 1pc fuel filter + 1pc spark plug + 1pc air filter

User questions & answers

Question: will this work on a craftsman
Answer: Yes, it does.
Question: Will this fit a craftsman 18" chainsaw model
Answer: It only comes with what you see in the picture. The white plastic part the roller slides on is not included. The roller cap and core are part number 0514118.
Question: Will this kit work on a poulan woodsman 2150 with a w-324 carburetor
Answer: Wagner 0529013 will work with the Opti-Stain Plus Sprayer. Please give our technical support a call at 1-800-328-8251 if you need further assistance.
Question: Anyone tried this on a craftsman saw? the fuel inlets in the oem are on the same sides... this one in the ad has them on each side. thanks
Answer: Yes. I just used it with CabinetCoat and it worked like a charm!

Carburetor for Poulan Chainsaw 1950 2050 2150 2375 Wild Thing 2375LE Walbro WT 89 891 WT-324 Zama C1U-W8 C1U-W14 Carburetor 545081885 Carb with Air Filter Fuel Line Spark Plug

Based on 50 reviews Check latest price

Product description

Fits Models:

PP210 Gas Saw--Engine Assembly

2025 Gas Saw--Carburetor Assembly Kit P/N 530069703

2025 Gas Saw--Internal Power Unit

2350 Gas Saw--Internal Power Unit

2375LE Gas Saw Type 2--Engine Assembly Type 2

2550LE Gas Saw Type 2--Engine Assembly Type 2

2550SE Gas Saw Type 2--Engine Assembly Type 2

S1634 Snapper Gas Saw Type 2--Engine Assembly Type 1 & 2

2155 Poulan Plus Gas Saw Type 1--Engine Assembly Type 1 - 4

1900 Gas Saw--Engine Assembly

1950 Gas Saw Type--Engine Assembly Type 1-5

  • Replaces part # 530069703, 530035343, 530071620, 545006058, 545006057, 545081885
  • Fits Poulan Chainsaw 1950 2050 2150 2375 Wild Thing 2375LE
  • Replaces Zama C1U-W8 C1U-W14. Replaces Walbro WT-891 W-20 WT-89 WT-391 WT-600 WT-624 WT-625 WT-637 WT-662
  • Package include: 1x Carburetor, 1x Air Filter, 2x Fuel Filter, 1x Fuel Line, 1x Spark Plug, 2x Gasket, 1x Primer Bulb
  • 100% satisfaction guarantee and 1 year warranty backed item. Please check the compatibility and pictures provided before ordering.

Carbhub Carburetor for Stihl MS210 MS230 MS250 021 023 025 Chainsaw Carb

Based on 376 reviews Check latest price

Product description

Compatibility:

Fits Stihl MS210 MS230 MS250 021 023 025.



Brand New Carbhub Carburetor for Stihl MS210 MS230 MS250 021 023 025 Chainsaw Carb.



Package list:

1x Carburetor

1x Fuel line

1x Oil line

1x Spark plug

1x Gasket

1x Fuel filter

1x Air filter

1x Oil filter

1x Impulse line

1x Intake manifold inlet



Tips: Please check the model provided and compare your old carburetor with our pictures to make sure fitment. If you are not sure, please email us firstly.

  • Fits Stihl MS210 MS230 MS250 021 023 025.
  • Brand new and high quality aftermarket carburetor.
  • Package list: 1x Carburetor, 1x Fuel line, 1x Oil line, 1x Spark plug, 1x Gasket, 1x Fuel filter, 1x Air filter, 1x Impulse line, 1x Oil filter, 1x Intake manifold inlet
  • Please kindly check that the item is sold by Carbour and Fulfilled by Amazon before buying.

User questions & answers

Question: will this fit ms210c, I see it will fit 210 but others list both
Answer: Be careful! I have no idea what I bought, but the black out lining that is Velcro will not stay up. BOOOO!
Question: Will this fit a MS230C
Answer: It is attached with a Velcro strip on the top of the blind, and it raises when with the blinds when they're raised and goes down when their down, but it appears it can be taken all the way off (although I haven't tried that, so I don't know if it really can).
Question: Does this kit contain both gaskets? Picture shows both but parts list shows only one gasket included
Answer: After reviewing the google page. It looks like it’ll work. Good luck and happy paint rolling.
Question: Will this also fit Stihl 191 chainsaw
Answer: Not sure. Looks the same but check with manufacturer.

Yermax WT-324 WT-891 Carburetor + Air Filter Kit for POULAN Craftsman Chainsaw PP210 2075C 2050WT 1950LE 1975LE 2055LE 2375LE 2150LE PPB1838LE

Based on 138 reviews Check latest price

Product description

Craftsman

358351143 358351063 358352181 358352160 358352162 358352161 358352180 358351141 358351042 358351041 358351060 358351061 358351062 358352830 358360100 358360150 358351140 358350160 358350270 358351580 358350080 358350060 358352680 944414430 944414370 944414420 358350660 358360280 358360260 358360131 944411364 358350562 358350802 chainsaw



Replace to Poulan Part Number: 545081885 / 530069703 / 530071821 / 530071618 / 530071620 / 545006057

Replace Part Number: WT-891 / W-20 / WT-89 / WT-600 / WT-624/ WT-637 / WT-662

Replace to Zama Numbers: C1U-W8 / C1U-W14

Fits the following models :

PP210 / 2025 / 2350 /2155 / S1634 / S1838 / 2075 / 2075C / 20750C / 2150 / 1900 / 2050 / 2055 / 2175 / 2375 / 1950 / 2050WT / 1950LE / 1975LE 2055LE/ 2375LE / 2150LE / 222 / 2250 / 2450 / 2550 / 2550LE / 2550SE / 262 / PP260 /PPB1838LE / SM4018

  • Replaces # WT-891,W-20,WT-89,WT-324,WT-391,WT-600,WT-624,WT-637,WT-662
  • Replaces # Zama C1U-W8,C1U-W14
  • Replace PNM # 545081885,530069703,530071821,530071618,530071620,545006057
  • For Poulan Gas saw: 1900 LE,1950 , 1950LE , 1975 Woodshark , 1975LE Woodshark , 2025, 2050, 2050LE , 2050WT, 2055 Gas Chain saw , 2055LE Gas Chain saw, 2075 , 2150 , 2150 Predator , 2150LE , 2150LE Predator , 2150LX , 2155 Poulan Plus , 2175 , 2175LE, 2250 , 2250LE, 2350, 2375 , 2375LE, 2450, 2550, 2550LE , 2550SE, PP220 Gas Chain saw , PP221 Gas Chain saw , PP221LE Gas Chain saw , PP260, PP260LE , PPB1634LE , PPB1838LE, S1634 Snapper, S1634LE, S1838 Snapper , S1838LE.
  • Package includes 1x Carburetor, 2x Air Filter, 2x Fuel Filter,1x Spark Plug, 2x Gasket, 2 x Primer Bulb, 2 x fuel line

User questions & answers

Question: Will fit craftsman 2.2 chainsaw
Answer: Hi Steven, Good news! Our Bravia X80J supports the ATSC 3.0 (NEXTGEN TV). Thank you for your inquiry! -Vincent
Question: Will this work for craftsman 42cc 2.6CI
Answer: Hi Troy, thanks for your inquiry. The X80J TV has Motion flow™ XR 240 (Native 60 Hz). -Ralph
Question: Where are instructions? I need carb preset settings. Can't get craftsman 16/36cc to run at idle
Answer: Hi Kenny, Thank you for your inquiry! Yes, the TV will support the PlayStation 5 console. To maximize the PlayStation 5, we recommend our XR55X90J which supports 4k 120hz, eARC and ALLM natively and VRR will be available via a future firmware update. Regards, Carl
Question: Does this fit Mac 3200 chainsaw
Answer: Install a video card with multiple outputs

Butom 545081885 Carburetor with Air Filter Tune Up Kit for Craftsman 358351143 944414430 358351142 358350563 358360131 358360280 35831440 358350060 358351061 Chainsaw

Based on 90 reviews Check latest price

Product description

Fit for:

Craftsman Chainsaw

358351143

358351063

358352181

358352160

358352162

358352161

358352180

358351141

358351042

358351041

358351060

358351061

358351062

358352830

358360100

358360150

358351140

358350160

358350270

358351580

358350080

358350060

358351560

35831440

358352680

944414430

944414370

944414420

358350660

358360280

358360260

358360131

944411364

358350562

358350802

358360881

358360831

358360180

358360830

358360130

358360880

358351040

350360171

358360171

358350601

358360871

358350801

358350462

358360121

358360170

358360870

358350800

358350600

358360151

358350441

358350461

358360101

358352681

358350380

358350370

358350460

358350440

358351450

358350360

358351460

358351440

358351142

  • Replaces Part Number:545081885 530071619 530071620
  • More model info.pls see product description
  • Package include 1 carburetor,1 air filter,1 fuel filter,1 primer bulb,2 2-feet fuel line,1 spark plug,2 gasket

User questions & answers

Question: Will this work with a
Answer: The shelves are the right size to hold one 10"x20" standard seeding tray. I don't think you can buy them separately, but you could jury rig some from stiff woven wire you could get at your local hardware or garden store.
Question: why won't the throttle adjusting screw slow the idle speed
Answer: They made new shades without requiring us to return the old ones. Our first set was not the correct width. Happy with the customer service.
Question: Does it need adjusting after installation
Answer: The color of the liner is beige. The texture of the fabric is like a satin-y & scuba material mix.

Butom 530071345 530071987 Carburetor with Air Filter Repower Kits for Husqvarna 36 41 136 137 141 142 Chainsaw

Based on 121 reviews Check latest price

Product description

Fit for:

Husqvarna

41 (1997-07) Chainsaw

36 (1997-07) Chainsaw

136 (1998-09) Chainsaw

136 (2001-05) Chainsaw

136 (2001-09) Chainsaw

136 (2003-01) Chainsaw

136 (2003-06) Chainsaw

136 (2004-01) Chainsaw

141 (1998-09) Chainsaw

141 (2001-05) Chainsaw

141 (2001-09) Chainsaw

141 (2003-01) Chainsaw

141 (2003-06) Chainsaw

141 (2004-01) Chainsaw

  • Package include 1 carburetor,1 air filter,2 fuel filter,1 2-feet fuel line,2 gasket,1 spark plug,2 gasket
  • Fuel line size:ID x OD:3/32'' x 3/16''
  • Replacement manufacturer part number: 530071693, 530035382, 530035330, 530071492, 530071345 and 530069629, 545013503
  • Repalce # WT-834 WT-657 WT-529 WT-289 WT-285 WT-239 WT-202
  • Compatible with Husqvarna 36 41 136 137 141 142 Chainsaw

User questions & answers

Question: Doth it have a choke
Answer: I am in Michigan and we have had a decent amount of snow and the cover has held up quite well. No cracks, sags or leaks in the plastic cover even with a few inches of snow.
Question: Does it fit a 142e? the description in the title says it does but the description in the "product information" doesn't list it
Answer: Yes...we actually have not installed some of the shelves to accommodate some of our taller plants.

Anzac 545081885 Carburetor Carb for Sears Craftman Poulan 2075c 20750c 2150 2150LE 2155 2175 2250 2350 2375 2450 Chainsaw Poulan # 530069703

Based on 153 reviews Check latest price

Product description

New high quality aftermarket carburetor carb for Poulan craftman,sears.

Fits Poulan / Craftsman P/N:

545081885 / 530069703 / 530071820 / 530071821 / 530071618 / 530071620 / 545006057 / 545006058 / 530035343 / 530071603 /

Compatible with walbro carburetors:

WT-891 / W-20 / WT-89 / WT-324 / WT-391 / WT-600 / WT-624 / WT-625 / WT-637 / WT-662

Fits ZAMA: C1U-W8 / C1U-W14

Fits Poulan Models :

222 / 262 / 1900 / 1950 / 1975 / 1975 woodshark / 2025 / 2050 / 2050WT / 2055 / 2075 / 2075c / 20750c / 2150 / 2150LE / 2150 Predator / 2155 /2175 / 2250 / 2350 / 2375 / 2450 / 2550 / 2550LE / PP220 / PP221LE /PP260 / PP260LE / SM4018 / S1634 / S1838

Fits Model

Poulan

1900

1950 Type 1,2,3,4,5,6,7

1950LE Type 1,2

1975 Type 1,2,3,4,5,6,7

1975LE Type 1,2

2025

2050 Type 1,2,3,4,5,6,7

2055 Type 1,2,3,4,5,6,7

2050LE Type 1,2

2050WT Type 1,2,3,4,5,6,7

2055LE Type 1,2

2075 Type 1,2,3,4,5

2075C Type 1,2,3,4,5

2075OC Type 1,2,3,4,5

2150 Type 1,2,3,4,5,6,7

2150 Predator Type 1,2,3,4,5,6

2150LE Type 1,2

2150 PR Type 1,2,3,4,5,6

222

2375 LE Type 2

2550 LE Type 2

2550SE, SILVER EDITION Type 2

260 Type 6 (2008-03)

262 (2008-03) PPB1838LE (2008-03) SM4018 (2008-03)

  • If You can't make sure this carburetor whether fit your machine, please send email to us to confirm
  • Replace P/N: 545081885 / 530069703 / 530071820 / 530071821 / 530071618 / 530071620 / 545006057 / 545006058 / 530035343 / 530071603
  • Compatible with Walbro: WT-891 / W-20 / WT-89 / WT-324 / WT-391 / WT-600 / WT-624 / WT-625 / WT-637 / WT-662/ Zama C1U-W8 C1U-W14
  • Used on Poulan 1900 1950 1950LE 1975 1975LE 2025 2050 2050LE 2050WT 2055LE 2155 2175 2250 2350 2375 2450 2550 2075 2075C 2075OC Gas Chain Saw PP220 PP260 PP210 PPB1838LE SM4018 S1634 S1838 S1838 .
  • Fit Poulan chainsaw: 1900, 1950, 1950LE, 1975, 1975LE, 2025, 2050, 2055, 2050LE, 2050WT, 2055LE, 2075, 2075C, 2075OC, 2150, 2150, Predator, 2150LE, 2150LE, Predator, 2155, 2175, 2250, 2250LE, 2350, 2375, 2375LE, BH2160LE, 2550T, 2450, 2550, 2550LE, 2550SE, SM4018, PP210 Chainsaws

User questions & answers

Question: i cant get the old choke lever off the old carb. Is there a replacement choke lever available
Answer: Unless there are "new old stock" - they should not be this expensive. I bought an entire kit - radio, dock, car dock, battery, etc. - for $30 used, on eBay, as a backup. These things are like tanks (I've been using my original unit since 2005 and everything still works).
Question: I have a craftsman 2.0 cu. in. / 33cc gas chainsaw.model 358.351440. i can't find a part # for the carb, just the rebuild kit. will this carb fit
Answer: Yes, the required connections are satellite radio antenna, and audio line out, and recommended but not required, DC power adapter to save on batteries
Question: Do you have a replacement for craftsman 358351081 chainsaw carburetor
Answer: Hello! Certainly! Just plug them in, and you're good to go! The hook-up gives you the ability to charge and use at home and car... Thanks!
Question: Will this fit an Echo CS- 440 chainsaw
Answer: It is almost 5 feet front and back I though it would be a little bigger than that because in the picture seam bigger than it really is.

Latest Reviews

View all