12 best snapper push mowers

Product description

Model#: 1687915| Model Name: SXD19PWM82K The push-button start Snapper XD 82V Max 19" walk mower features a durable steel 3 in 1 mowing deck, allowing you to mulch, side discharge or bag for up to 90-minutes with the included Briggs & Stratton 2.0 battery. Effortlessly choose from 7 different cutting heights with a convenient single lever height of cut adjustment. This quiet walk mower requires less maintenance and has vertical storage capabilities, saving you valuable time and space in your garage or shed. Charging times: (min): 2.0: 13 (50 percent), 30 (100 percent) 4. 0: 25 (50 percent), 60 (100 percent); Run Time (min): Up to 45 minutes (with each fully charged 2.0 battery). Maximum initial battery voltage (measured without workload) is 82-volts. The nominal voltage is 72.

Run time and output capacity may be affected by conditions. Maximum battery run time is measured by 2.0 82V batteries, fully charged.

• Up to 90-minutes run time with Briggs & Stratton 82V Lithium ion 2.0 Batteries; Kit comes with 2.0 Lithium ion batteries and rapid charger
• 19 inch steel mowing deck with 3 in 1 design mulch, bag or side discharge grass clippings easily.
• Smart, efficient load sensing technology power adjusts to meet the demands of the cutting blades
• Push button start and a single lever, 7 position height of cut adjustment
• Compact vertical storage capability saves room in a garage or shred

User questions & answers

Question:	Is this snapper powered by briggs and stratton or greenworks? it looks exactly like the greenworks commercial line
Answer:	'Global Tool Works' (Group in China) manufactures Snapper & Greenworks mowers and battery packs no matter what name is on them. GTW also makes Kobalt, probably others.
Question:	How long does each battery last on average? each individual battery please. (joe
Answer:	45 minutes is what is advertised. But it all depends on how tough your turf grass is. Thick St. Augustine will shorten the battery charge significantly. Add moisture to the mix and it's even shorter. On average battery charge is reduced by nearly half for thick grass that is holding any moisture.
Question:	is it possible to overcharge the battery if left on the charger say all week
Answer:	Nope. From everything I've read. It is a smart charger. Leave mine on there all the time. Seems to not be actiblvely charging once battery is full (fan runs and makes noise during active charging). Have to say after years of 4 cycle engines, this is awesome!!
Question:	Need a good source for buying exact replacement blade online? Snapper dealers aren't convenient to me and don't have much of an online presence
Answer:	Unfortunately the blade for this mower is not on Amazon. The blades part number is #770191 and you can get this part from "Sears Parts Direct" and "Outdoor Power Direct" online.

Product features

Snapper XD 19-Inch Cordless Push Walk Mower| SXD19PWM82K

The Snapper XD 82V Max* 19” Cordless walk mower powered by a 2.0, 4.0, or 5.0 Briggs & Stratton Lithium-Ion Battery is built for durability and ease of use. The 19” walk model features a steel 3-in-1 mowing deck, providing mulch, side discharge or bagging options. Get the job done quickly by being able to mow up to 45-minutes** off a single charge of a 2.0 battery (additional runtime available with separate 4.0 or 5.0 battery). The quiet, efficient operation makes this mower easy to own.

Brushless Motor Technology

A long life, 1,000 or 1,200-watt high-efficiency brushless motor provides the power and reliability you need to mow your yard for years to come.

Smart and Efficient Operation

Load Sensing Technology allows for the power to adjust to meet the demands of the cutting blades, while single-lever, 7 height-of-cut adjustment easily adjusts to select your preferred cutting height.

Satisfying Touch Points

Overmolded rubber handle provides an ergonomic grip and comfort for the operator with the capability to fold up for space-saving storage. It also includes easy-to-reach touch points, including push button start.

Product description

Part # 6317 is an Aftermarket Copperhead Toothed Mulching Lawn Mower Blade by Rotary Corp. This blade has a Cutting Length of 22 11/16", Width of 2 3/4", Thickness of 0.1600", Center Hole and Outer Holes of 3/8". This Blade was Designed by Rotary to be an Aftermarket Replacement for Snapper 7-7168, 1-9645, 1-9795, 7019795, 7019795BZYP, 7041939BZZ, 7041939BZYP.

• Aftermarket Replacement Copperhead Toothed Mulching Lawn Mower Blade by Rotary Corp
• Rotary Corp Part Number: 6317
• Cutting Length: 20 11/16" | Width: 2 3/4" | Thickness: 0.1600" | Center and Outer Holes: 3/8"
• We recommend consulting your Parts / Owner's Manual to ensure proper fitment.

User questions & answers

Question:

Are they made in the USA

Answer:

Yes they are. The product bags fairly well on the high-vac snapper and chops the grass into small clippings. Not quite the vacuum as the high-vac blade but will fill the bag no problem. Works well with the side discharge shoot also. As far as mulching it does good but I have the high-vac deck with a lip not the recycler deck so the grass seems to stay under the deck more. It would probably mulch better with the recycler deck. If you need to pick up sticks and debris go for the high-vac blade. I have used it on really thick grass with the side shoot and it spreads the grass very well.

Product description

Oregon Gator G3 96-630 is your go-to lawn mower blade in all conditions including wet, dry, and sandy turf. Gator G3 blades offer superior mulching, fewer bag stops, and cleaner side discharge than the standard manufacturer blade. It’s not a replacement blade. It’s an upgrade Replaces many models, including but not limited to the following: Sunbelt B1PD2038, Stens 302-076, Snapper 7026565YP, Snapper 7026565BZ, Snapper 7026565BZYP, Snapper 7026565BM, Snapper 7026565BMA, Snapper 7026565, Snapper 7018069BZYP, Snapper 7018069BZ, Snapper 7018069BMA, Snapper 7018069, Snapper 18069, Rotary 6297, Prime Line 7-08522, Mowmore MB6297, Laser 91533.

From the Manufacturer

Oregon is a world leader in mower blade manufacturing. Our patented Gator Mulcher 3-N-1 blades redirect the airflow allowing the grass clippings to be cut into small pieces. They will allow mowers not equipped with a mulching blade to reduce the volume of blade clippings and will reduce your fall leaf cleanup time. Unlike most mulching blades, they will allow you to bag your clipping and leaves, but because the pieces you will stop less often. Blades are made to a 26 point quality checklist that insures our blades meet exacting standards and give you a great looking lawn. We offer blades to fit many brands of walk behind and riding mowers.

• Center hole: 1-1/16"
• Aggressive blade angle increases air flow to push debris up and out for superior bagging or side discharge
• Gator Mulcher provides cleaner, more efficient cutting performance can eliminate the need to bag, saving time and hassle.
• Replacement for major brand: Snapper

User questions & answers

Question:	Will this fit a john deere gx
Answer:	Hi! This keyboard has an US layout which means that it isn't equipped with the ñ. However, if you change the language settings of your computer you can type with a Spanish layout. If you have any further questions please don't hesitate to contact us again. Best regards, Perixx Support
Question:	Will it fit a toro timecutter
Answer:	Hi, the keyboard is designed for WindowsOS that means if you use Windows as your operating system the keyboard will work. Since Microsoft Office is an application it depends on the operating system you are using. If it is macOS the keyboard should function, but the hot keys might not work as expected.
Question:	Will it fit a john deere rx
Answer:	Hi, the palm rest is made out of plastic. For further questions please contact us directly. Best regards, Perixx Support
Question:	Will it fit my troybilt tb30 model 13a726jd066 manufactured
Answer:	Hi, thank you for your interest in this duo. This mouse is an ergonomic mouse which is designed for right handed people.

Product features

Oregon G3 Gator Blades

Oregon is the original manufacturer of the exclusive Gator Mulcher feature included on every Gator blade. Gator G3 blades are made to the specifications for direct OEM replacement, but it's not just a replacement blade - it's an upgrade.

The Gator Mulcher reduces - and in some conditions, eliminates - the need for bagging by breaking down finer clippings into nutrients for the soil, saving you time. The high lift blade angles increase air flow, which pushes debris up and out for better side discharge.

Gator blades are extremely durable and resistant to bending and breaking. Great for normal & abrasive conditions.

Oregon has a full range of replacement blades for most residential & commercial mowers.

One Pass Perfection

No leftover long grass. No need to pass over the same area twice.

Oregon Quality

You can count on Oregon replacement lawn mower blades to be the best in the industry. Oregon blades not only meet specifications, they often ARE the specification.

Oregon mower blades are created using manufacturing processes that combine the latest technology with a comprehensive range of quality control standards. These processes and standards are designed to provide Oregon blades with the consistency and longevity that professionals demand and homeowners prefer.

Product description

Model#: 1687966 | Model Name: 20WM48K Mowing is now made simple with this Snapper HD 48-Volt MAX* electric cordless lawnmower kit, which includes a Briggs & Stratton 48-Volt MAX 5.0 battery and charger. Take all the hassles out of mowing with push-button starting, intelligent load sensing technology and a 3-in-1 mulch/bag/side discharge steel deck that helps make mowing effortless. Get your preferred lawn height every time with the convenient single lever, 7 height-of-cut adjustment. Quiet operation levels and run times up to 90-minutes** allow you to accomplish your chores with ease. This quiet walk mower requires less maintenance and also has vertical storage capabilities, saving you valuable time and space in your garage or shed. *Maximum initial battery voltage (measured without workload) is 48-volts. Nominal voltage is 43. **Run time, charge time and output capacity may be affected by conditions.

• Up to 90-minute run time with the Briggs & Stratton 48V MAX 5.0 Lithium-ion Battery under light loads*. Kit includes 1 lithium-ion battery and 1 rapid charger
• 20-Inch Steel mowing deck with 3-in-1 design to mulch, bag, or side-discharge grass clippings with ease
• Intelligent load-sensing technology allows for optimum power levels while you mow for maximum efficiency
• Single lever, 7 position height-of-cut adjustment for ideal lawn height
• Vertical storage capability to easily store and save space in your garage or shed

User questions & answers

Question:	is the handle adjustable
Answer:	The handle is adjustable in the sense that it can be folded over the mower. If you're inquiring about the handles telescoping to be longer/shorter, unfortunately they cannot.
Question:	Is this a brushless motor
Answer:	This mower (model 1688022) does have a brushless motor.
Question:	Where can you buy a replacement blade, #84001939? I've looked everywhere
Answer:	I would check with a local dealer who services Snapper. I have had a replacement order for the side grass deflector pending since May, with no luck yet in mid September. I would not have ordered this mower had I known getting replacement parts would be such a hassle. Good luck
Question:	can this mower be used to mulch leaves into the bag in the fall
Answer:	Yes, this mower can be used to mulch or bag leaves.

Product features

Convenient Push-button Starting

So you can easily start your mower and get going with the task ahead.

Easy Height-of-Cut Adjustment

Single-lever, 7 height-of-cut adjustment lets you achieve your ideal lawn height.

Brushless Motor With Intelligent Load-sensing Technology

high efficiency output and allows for optimum power levels while you mow for maximum efficiency.

Simple Vertical Storage

Allows you to easily store and save space in your garage or shed.

Up To 90-minutes Of Run Time*

*Run time, charge time and output capacity may be affected by conditions.

20-inch Cut Width On 3-in-1 Steel Deck

3-in-1 mulch/bag/side-discharge options so you can mow to your preferred style.

No Cord

Cordless lithium-ion battery power allows you to get the job done, without the hassles.

Product description

This is an O.E.M. authorized part. Fits in the popular models (but not limited to): 12ACC6S6709, 12A-B29V583, 12ABB22J756, 100, 12AQC6B9599, 11A-A21E515, 11B-A1S5599, 11A-B2A3515, 11A-A14E500, 11A-B29Q501, 11A-B29Q501, 11A-B29Q501, 11A-B2KB501, 11A-B0A9504, 11A-A24E500, 11A-A21B599, 11A-A21B599, 12AVB2BV766, 11A-A1BA583, 11A-B2A9504, 11A-B1BG590, 11AEB27Q563, 11A-A0KB501, 11A-A0KB501, 11A-A0KB501, 11A-A0KB501, 12AVB2M7059, 11A-B29Q590, 11A-B29Q590, 11A-B29Q590, 11A-B2A9504, 11A-54K3066, 11A-A04T565, 11A-A14R500, 12A-K2M7766, 11A-A0S5583, 11A-A0S5583, 11A-A14E516, 12A-B2M5563, 11A-A22L500, 11A-B29V583, 11A-A14E500, 11A-A24A500, 11A-A04E500, 11A-A09Q501, 11A-A22Q563, 11A-B2A9563, 11A-54K3066, 12ACC35S766, 11A-B2KB501, 11A-B0A9504, 11A-A24E500, 11A-B2A9504, 12AGA25S711, 11A-B1BG590, 11A-A14E500, 11A-B29Q501, 11A-B29Q501, 11A-B29Q501, 11A-B2A9504, 11A-A1BA583, 11AEB27Q563, 11A-A0KB501, 11A-A0KB501, 11A-A0KB501, 11A-A0KB501, 11A-B29Q590, 11A-B29Q590, 11A-B29Q590, 11B-A1S5599, 11A-A2BM711, 11A-A2BM711, 12A-A2BU711, 12A-A2BU711, 11A-A23O711, 11A-A23O711, 11A-A23O711, 12AVB2AQ711, 11A-A26M011, 11A-A26M011, 11A-A26M011, 11A-A26M011, 11A-B29Q711, 11A-B29Q711, 11A-B29Q711, 11A-B29Q711, 12AVB2A3711, 12AVB2A3711, 11A-B2RQ711, 11A-B2RQ711, 11A-B2AQ711, 12AVB26M011, 12AVB26M011, 12A-A26M011, 12A-A26M011, 12A-A26M011, 12A-A26M011, 12ABD3BZ711, 12ABD3BZ711, 12AVB2RQ719

• This is an O.E.M. authorized part
• Fits various MTD models
• OEM Part Number 731-7131
• This is a MTD replacement part
• See product description below to determine if this unit fits your model.

User questions & answers

Question:	Does this fit Cub Cadet SC 100 with 159 cc engine
Answer:	Your OEM part number is MIU13815 and it does not cross to this particular John Deere number but it does to other John Deere gas caps.it appears to be about the same size tank but I can not guarantee it will fit.
Question:	Will this fit a troy bilt db
Answer:	If your B&S filler neck is threaded, this should fit.
Question:	Will this fit a mtd white 54 inch cut
Answer:	Should
Question:	will this fit a troy built
Answer:	I have J type carriers and my 'homemade' bar works fine. It's just a way of getting the boat up to the carrier level one end at a time. I have to put the boat into the J carriers and then flip it on its side.

Product description

**Verify part fits before purchasing**



Spec:



Description: Fuel Cap

Ethanol: Not compatible with greater than 10% ethanol fuel

ID: 1 3/4"



Replaces OEM NUmbers:



Briggs & Stratton: 397974, 397974S, 4131, 4149, 4221, 4227, 493017, 5044, 5044B, 5044H, 5044K, 692046, 793606

Craftsman: 33385

John Deere: LG397974, LG397974S, M143291, MIU11172, MIU12350, PT11028, PT12572



Compatible with:



Briggs & Stratton: For 3.5 thru 6 HP vertical Max, Quantum and Europa engines

• Specs: Description: Fuel Cap, Ethanol: Not compatible with greater than 10% ethanol fuel, ID: 1 3/4"
• Replaces OEM Numbers: Briggs & Stratton: 397974, 397974S, 4131, 4149, 4221, 4227, 493017, 5044, 5044B, 5044H, 5044K, 692046, 793606, Craftsman: 33385, John Deere: LG397974, LG397974S, M143291, MIU11172, MIU12350, PT11028, PT12572
• Compatible with: Briggs & Stratton: For 3.5 thru 6 HP vertical Max, Quantum and Europa engines
• Stens 1 year warranty ensures reliability and performance for every part. We're confident that our products will work flawlessly, but in a rare case that it does not, we'll replace it anytime within one year of your order.
• Stens branded parts are trusted by professional dealers to perform OEM quality repairs. The Stens name is featured on all Genuine Stens product packaging.

User questions & answers

Question:	does the cap include the vent gasket
Answer:	The bag is not water proof. It is not water resistant.
Question:	Will this fit a js38 john deer push mower
Answer:	Yes. We don't use all the straps so have to keep the bottom in place with our bodies. Works great with our kayaks.
Question:	Will this fit a craftsman with a b &s 6.00 hp engine model 917.388061 push lawnmower
Answer:	I think it’s universal as long as your kayak has the front and rear hooks to attach the straps. There are two forward support straps and two rear that attach to the kayak.
Question:	Will this fit a fmc bolens g10 with a 10hp b&s
Answer:	It's sold both ways: with or without the bag. I bought mine (nearly 2 yrs ago) without, about $5 cheaper, and use one of the strap buckles (no bag but the buckles are still there) to secure my waterproof phone bag. It's got over 200 miles on it and is currently being used on a 15-foot sit-in I built. The straps need periodic adjustment & the fabric is loose (not torn or ripped just loose) from the foam in the center of the backrest but it still works fine. I need the extra support, broke L1 some years ago, a plain back band didn't cut it.

Product description

Fits most lawn mowers, snow throwers & other outdoor power equipment. Contains two short bolts, Two large bolts & two Handles. 2Piece fits most lawn mowers, snow throwers & other outdoor equipment contains two short bolts, Two large bolts & two Handles Includes 2-5/16" X 1" Bolt & 2-5/16" X 2" Bolt.

• Fits most lawn mowers, snow throwers and other outdoor equipment
• Contains two short bolts, two large bolts and two handles

User questions & answers

Question:	What is the bolt diameter? Is it
Answer:	2 1/2 inches. I placed bolt upright in a 8mm socket and it was a bit loose but close enough to give you an idea of that size too
Question:	how long are these bolts
Answer:	The T-handle and bolt seem pretty universal for a normal diameter lawn mower handle. I am not sure if it will fit a Jo electric mower
Question:	What is the width of the handle
Answer:	I believe the clamps being sold at Rockler are made by Powertec and just branded Rockler... I cannot tell the difference in the material size, quality or finish between Rockler and Powertec.
Question:	will this fit a snow Jo eletric lawn mower
Answer:	They fit POWERTEC T track 9/16" T Slot.

Product description

American Lawn Mower Company 14-Inch 5-Blade Push Reel Lawn Mower is a green alternative to gas-powered lawnmowers. Moreover, this lawn mower is easy to use and does not emit fumes. It can cut your lawn in a precise scissor-like motion that will not shred your grass to make your lawn appear better. This reel lawn mower has a low maintenance hassle-free design that only requires to be sharpened at least once every 3-5 years. Perfect for youths over the age of 13 and compact yards. When you buy it, you won’t have to worry about fuel, maintenance, and repairs that make this push blade mower a smart choice.

From the Manufacturer

The power source behind our mowers hasn't changed much in 100 years. It's still readily available on demand. You can still fuel it for the price of a banana and a glass of milk. It always works when you want it to, and it doesn't leave any residue for the environment to absorb other than a couple of foot prints in a perfectly cut lawn. People- the power behind our mowers in 1895, and the power behind them today. What has changed is the product available to the people. At American Lawn Mower, we've applied a century of technology to a good old fashioned idea: the reel lawn mower. Today's reel mowers are lightweight and easy to maneuver. They're ideal for today's smaller lawns, and today's hectic lifestyles. They're always ready when you're ready, and they're almost maintenance free with no spark plugs to foul or engines to clog up. They're good to the environment and they're good to the lawn, snipping the grass for a clean, precise cut. A cut that's helped us carve our niche as the nation's largest manufacturer of in-demand, on-demand reel mowers. We've spent 100 years of perfecting our reel mower designs, streamlining our production processes and searching for the best possible materials to build the best reel mowers possible. And we're proud of all that. But more important still, we've spent the last 100 years, and we'll spend the next 100 more, keeping America Green. American Lawn Mower 14-inch cutting width Reel Lawn Mower. 3 spider 5 blade ball bearing reel. Heat treated alloy steel reel and bed knife blade. 10-inch composite wheels with radial rubber tires. Cutting height adjustment of 1-inch to 1-3/4-inch. T style handle.

• 5-blade reel with a cutting width of 14” and durable 8.5” polymer wheels for maximum maneuverability
• Mechanical lawn mower with an adjustable blade height of 1”-1.75” with scissor action cut
• Manual grass cutter blades made of heat-treated alloy steel that stays sharp for years
• Planet-friendly alternative to gas-powered lawn mowers which is pollution-free and noise-free; Low maintenance, lightweight and easy to use
• Capable of cutting grass up to 4 inches tall

User questions & answers

Question:	I cant adjust the blade guard as pictured in the manual by loosening the screws. Has anyone found a solution
Answer:	Thorn, Thank you for your question. Not sure that your question is intended for this reel mower. There is a cutter bar/blade but it is not recommended to adjust unless mower is not cutting. If you would have additional questions, please call us at 800-633-1501. American Lawn Mower Company
Question:	is the insurance necessary to buy
Answer:	I don't think so
Question:	Im buying this for my son, whats the return policy if he dont like it
Answer:	It says in the description that it's free. When you actually ask for a refund they will charge you $29.98 to return it. Doesn't seem free to me.
Question:	Do the blades need to be sharpened? how often
Answer:	I had my lawn mover for the past couple of years and never sharpened the blades. This is a quality lawn mower and easy to use. Two thumbs up!A must-have for every household.

Product features

Push manual lawn mower that is versatile enough to cut grass, yet lightweight and maneuverable

The American Lawn Mower 14" 5-Blade Push Reel Lawn Mower is a mechanical lawn mower that will cut grass up to 4 inches tall. It is easy to assemble, and easy to use. The blades can be adjusted to help cut grass to the users desired length. It has a durable, yet comfortable cushioned handle that gives the user the perfect balance between grip and comfort. This gas-less lawn mower is a practical and planet-conscious choice since it has zero carbon emissions. The mower will allow you to forget about the cord, fumes, oil, fuel, and noise of gas engine lawn mowers. If you want a maneuverable lawnmower that is lightweight and low maintenance, then the American Lawn Mower 14" 5-Blade Push Reel Lawn Mower is a great choice.

Easy assembly and ease of use, maneuverability, lightweight

The American Lawn Mower 14" 5-Blade Push Reel Lawn Mower is a manual lawn mower that is easy to assemble and maneuverable. You can easily assemble it in less than 10 minutes. If you have kids who want to help you with mowing, this old fashioned lawn mower is a safe option. Besides, the cushioned handles are sturdy and comfortable which can make mowing a lot easier for you as you push it in and around your lawn. This lightweight lawn mower is so easy to store that you can carry it a few steps up your porch or storage shed.

Years of value

This push lawn mower is made of sturdy materials that can last for years. It is very convenient and safe to use. Also, it is very low maintenance since it doesn’t have a motor. All you have to do is just sharpen the blades every 3-5 years, and it is good as new. The maintenance is a lot cheaper for a blade mower because you can forget about the gas, oil and regular maintenance that gas lawn mowers require.

Natural, green, pollution/emission-free, noise-free

Nowadays, we are more conscious of the environment and our carbon footprint. That is why Great States provides you with green options that are both quiet and emission-free. Our products allow you to mow the lawn, and protect the environment at the same time. The natural push mower option is better for your health, because you will not have to deal with the fumes caused by burnt oil and gas in other lawn mowers.

Ideal for grass length of up to 4 inches

The American Lawn Mower 14" 4-Blade Push Reel Lawn Mower is a mechanical lawn mower that can cut grass up to 4 inches tall. Users can adjust the height of the blades from 1” to 1.75” depending on preference. This manual reel mower cuts grass evenly in a scissor action cut, so the leaves do not get shredded, which in turn will make your lawn look better.

Product description

MaxPower's 331300 includes 1 blade for many 21 in. cut and 41 in. cut Snapper steel deck mowers. Two blades are required for a 41 in. cut diameter. This blade replaces OEM #s 1-9795, 7019795, 7019795BZ and Windsor 50-2670. It measures 20-11/16 in. L and 2-3/4 in. W with a 3/8 in. center hole diameter. To ensure proper fit, please verify the OEM # of the blade you are replacing matches the OEM # listed in this description. MaxPower blades are proudly manufactured in the USA to meet or exceed OEM specification.

• Includes 1 blade for many 21 in. cut and 41 in. cut Snapper steel deck mowers
• Replaces OEM #'s 1-9795, 7019795, 7019795BZ and Windsor 50-2670
• Measures: 20-11/16 in. L and 2-3/4 in. W
• 3/8 in. center hole diameter
• Manufactured to meet or exceed all OEM specifications

User questions & answers

Question:	Does this blade use a 3/8" dia mounting hole
Answer:	I think it did on my snapper push mower.
Question:	Will this work with a non hi lift deck, with the wings bolted on? i have a rear bagger normal deck model
Answer:	Worked on my snapper non high lift - lawn tractor with the wings bolted on. If the wings touch, then there’s a ridge under the deck that can be ground down just a fraction.

Product description

This is an O. E. M. Authorized part. Fits in the popular models (but not limited to): 11A-B2A9711, 12ACC6S6709, 18AEB9C7766, 12ABB22J756, 12AGB2S6701, 12AKD3AQ701, 11A-A2BA700, 12AVB2BV766, 11A-B22Q504, 11A-A2BA700, 18BEB9C7766, 18BEB9C7766, 18DGB2C7766, 12A-K2M5783, 12A-K2M7766, 18AEB9C7766, 18BGB2C7766, 12A-B2AQ897, 12ACC35S766, 12AGA25S711, 11A-B22Q504, 11A-A2BM711, 11A-A2BM711, 11A-A2BM711, 11A-B0BL765, 11A-B0BL765, 11A-B0BL765, 12A-A2BU711, 12A-A2BU711, 12A-A2BU711, 12A-A2BU711, 11A-A23O711, 12AVB2AQ711, 12AVB2AQ711, 12AVB2A3711, 12AVB2A3711, 11A-B2BW799, 11A-B2RQ711, 11A-B2RQ711, 11A-B2RQ711, 11A-B0BL729, 11A-B0BL729, 11A-B2AQ711, 11A-B23Z758, 11A-A2BA758, 11A-A2BA758, 11A-A2BA758, 11A-A2BF758, 11A-A23K758, 11A-B28S799, 11A-B0S5700, 11A-B0S5700, 11A-B0S5700, 11A-B0S5700, 12B-B28S799, 12A-B28S799, 11A-B9A9729, 11A-B25F799, 12ABD3BZ711, 12ABD3BZ711, 11A-A25F799, 11A-B24Z758, 12AVB2RQ719, 12AGA2A6711, 11A-A0S5700, 11A-A0S5700, 11A-A0S5700, 12A-A03Z758, 12A-A03Z758, 12A-A2B8799, 12A-A2B8799, 12A-A2B8799, 11A-A0S5731, 11A-A0S5731, 11A-A0S5731, 12A-C2BU711, 12ABB22J799, 11A-B96N729, 12ABB2M5709, 12A-B2A3778, 12A-B2A3778, 11A-B22J731, 11A-B22J731, 11A-A0BR799, 12AVB2BV711, 11A-B0BS799, 11A-B2SD799, 11A-B2B6758, 11A-B2B6758, 12ABB22J709, 11A-A92J710, 12AVP2R3793, 11A-B2BM766, 11B-B0S5700, 12AGB25P799, 12AGB25P799, 11A-A2BM766, 11A-A2BM766, 11A-A2BM766

• This is an O. E. M. Authorized part
• Fits various MTD models including, but not limited to: 11A-BBL765, 11A-BS57, 11A-BBL7, 11A-A2S57, 12A-ABE7, 11A-AX7, 12A-AM57
• This is a MTD replacement part
• See product description below to determine if this unit fits your model.

User questions & answers

Question:	Would this item fit a Honda self-propelled mower
Answer:	This is an OEM mower Blade. Designed to fit various Briggs & Stratton motors. As long as you have BS motor it will fit. Mower manufacturer is a moot issue for the blade.
Question:	Does this come pre assembled
Answer:	The web site says "No there is no software to program/assign buttons." No actual manual came with it, either. So I have no idea if there is a way to disable any of the buttons. I like it a lot, but it is not very sophisticated.
Question:	Will this fit craftsman model
Answer:	That would depend on what driver you are using, not on the mouse hardware itself.
Question:	Does his come with the pin and spring? everything including bolts? since the images are only on the front, can not determine the actual attaching gear
Answer:	See a couple of incorrect answers here. I have this mouse, and the wheel does indeed tilt to the right. On Windows 7, for me what happens is that if I tilt it right, a little circle appears on the screen. Inside the circle will be either 2 or 4 arrows, depending on if the window can be scrolled vertically, horizontally, or both. Once that circle appears, you can let go of the scroll wheel, and just move the mouse; the window will scroll in that direction. So it works a little differently from other scroll wheels I've used, where I had to continue to hold the wheel to the left or right to scroll horizontally.

Product description

Stens 430-165 Ignition Switch, Replaces Snapper 7012623YP. Replaces OEM: Snapper 1-2623, 7012623, 7012623YP.

• Replaces OEM: Snapper 1-2623, 7012623, 7012623YP
• 2 positions, 2 terminals
• 5/8" mounting stem
• Push button style

Product description

Scotts 40-Volt 5. 0 Ah Lithium-Ion Cordless 19-Inch Steel Deck Lawn Mower requires no gas, no oil and starts every time. The powerful brushless motor delivers gas-like performance, increased efficiency, and run-time. The 3-in-1 functionality provides side discharge, mulching and rear bagging options. The Scotts mower is equipped with quick, adjustable fold-down handles for easy vertical storage. All Scotts cordless mowers come with a steel tube front guard and lift handle. 5. 0 Ah battery and fast charger included. 4-year tool and 2-year battery . Battery is compatible with all Scotts 40-Volt Lithium-Ion Products. Battery level indicator on all Scotts 40-Volt Batteries.

• Powered by 40-Volt 5Ah lithium-ion battery and fast charger included; Auto-adjust, 2-speed brushless motor for gas-like power, increased efficiency, and run-time
• 19" cutting width with durable steel deck; Single point cutting height adjustment lever; Steel tube front guard and lift handle
• 3-in-1 functionality provides a mulching, side discharge, and rear-bagging system; Grass catcher with 16 Gal bag capacity; Adjustable cutting height of 1.5"-3.75"
• Quick adjustable fold-down handle for easy vertical storage in a shed or garage; Cordless electric powered and requires no gas or oil
• Eco-friendly alternative to gas-powered lawn mowers; Battery compatible with all Scotts 40-Volt Lithium-Ion products

User questions & answers

Question:	Where do I find a replacement battery for this mower (Scotts 61940S mower
Answer:	Call the manufacturer 800-618-7474 part number BL85040
Question:	I just purchased this mower and it won't run for longer than 20 or 30 seconds before turning off. Any suggestions? I tried raising the deck height
Answer:	Andrew, Thank you for your question. Please double check that the handle is properly locked in place at the hinge point near the cutting deck. Also, double check the amount of charge on the batteries. In rare occasions the battery will show it has a charge, but it can't hold that charge. If you do those and still not correcting the issue, please email us at contact@americanlawnmower. Describe your issue, any trouble shooting you have done and include a copy of your Amazon receipt and your address. We can then determine if there is a need for a warranty claim. Scotts Outdoor Power Tools
Question:	Is this a push mower or self propelled? Should be in description
Answer:	Jerry, Thank you for your question. The Scotts 60040S mower is a push mower. We hope this answers your question. If you have more we are happy to assist. Scotts Outdoor Power Tools
Question:	How do you turn on
Answer:	I have the slightly different 60040S model, but the mechanism is probably similar. You have to press a separate button before you grip the power lever. This way you can't accidentally grab the handle and turn on the mower.